// SPDX-License-Identifier: GPL-2.0/* sysfs entries for device PM */#include <linux/device.h>#include <linux/kobject.h>#include <linux/string.h>#include <linux/export.h>#include <linux/pm_qos.h>#include <linux/pm_runtime.h>#include <linux/atomic.h>#include <linux/jiffies.h>#include "power.h" /* * control - Report/change current runtime PM setting of the device * * Runtime power management of a device can be blocked with the help of * this attribute. All devices have one of the following two values for * the power/control file: * * + "auto\n" to allow the device to be power managed at run time; * + "on\n" to prevent the device from being power managed at run time; * * The default for all devices is "auto", which means that devices may be * subject to automatic power management, depending on their drivers. * Changing this attribute to "on" prevents the driver from power managing * the device at run time. Doing that while the device is suspended causes * it to be woken up. * * wakeup - Report/change current wakeup option for device * * Some devices support "wakeup" events, which are hardware signals * used to activate devices from suspended or low power states. Such * devices have one of three values for the sysfs power/wakeup file: * * + "enabled\n" to issue the events; * + "disabled\n" not to do so; or * + "\n" for temporary or permanent inability to issue wakeup. * * (For example, unconfigured USB devices can't issue wakeups.) * * Familiar examples of devices that can issue wakeup events include * keyboards and mice (both PS2 and USB styles), power buttons, modems, * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events * will wake the entire system from a suspend state; others may just * wake up the device (if the system as a whole is already active). * Some wakeup events use normal IRQ lines; other use special out * of band signaling. * * It is the responsibility of device drivers to enable (or disable) * wakeup signaling as part of changing device power states, respecting * the policy choices provided through the driver model. * * Devices may not be able to generate wakeup events from all power * states. Also, the events may be ignored in some configurations; * for example, they might need help from other devices that aren't * active, or which may have wakeup disabled. Some drivers rely on * wakeup events internally (unless they are disabled), keeping * their hardware in low power modes whenever they're unused. This * saves runtime power, without requiring system-wide sleep states. * * async - Report/change current async suspend setting for the device * * Asynchronous suspend and resume of the device during system-wide power * state transitions can be enabled by writing "enabled" to this file. * Analogously, if "disabled" is written to this file, the device will be * suspended and resumed synchronously. * * All devices have one of the following two values for power/async: * * + "enabled\n" to permit the asynchronous suspend/resume of the device; * + "disabled\n" to forbid it; * * NOTE: It generally is unsafe to permit the asynchronous suspend/resume * of a device unless it is certain that all of the PM dependencies of the * device are known to the PM core. However, for some devices this * attribute is set to "enabled" by bus type code or device drivers and in * that cases it should be safe to leave the default value. * * autosuspend_delay_ms - Report/change a device's autosuspend_delay value * * Some drivers don't want to carry out a runtime suspend as soon as a * device becomes idle; they want it always to remain idle for some period * of time before suspending it. This period is the autosuspend_delay * value (expressed in milliseconds) and it can be controlled by the user. * If the value is negative then the device will never be runtime * suspended. * * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay * value are used only if the driver calls pm_runtime_use_autosuspend(). * * wakeup_count - Report the number of wakeup events related to the device */ const char power_group_name[] = "power";EXPORT_SYMBOL_GPL(power_group_name); static const char ctrl_auto[] = "auto";static const char ctrl_on[] = "on"; static ssize_t control_show(struct device *dev, struct device_attribute *attr, char *buf){ return sysfs_emit(buf, "%s\n", dev->power.runtime_auto ? ctrl_auto : ctrl_on);} static ssize_t control_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n){ device_lock(dev); if (sysfs_streq(buf, ctrl_auto)) pm_runtime_allow(dev); else if (sysfs_streq(buf, ctrl_on)) pm_runtime_forbid(dev); else n = -EINVAL; device_unlock(dev); return n;} static DEVICE_ATTR_RW(control); static ssize_t runtime_active_time_show(struct device *dev, struct device_attribute *attr, char *buf){ u64 tmp = pm_runtime_active_time(dev); do_div(tmp, NSEC_PER_MSEC); return sysfs_emit(buf, "%llu\n", tmp);} static DEVICE_ATTR_RO(runtime_active_time); static ssize_t runtime_suspended_time_show(struct device *dev, struct device_attribute *attr, char *buf){ u64 tmp = pm_runtime_suspended_time(dev); do_div(tmp, NSEC_PER_MSEC); return sysfs_emit(buf, "%llu\n", tmp);} static DEVICE_ATTR_RO(runtime_suspended_time); static ssize_t runtime_status_show(struct device *dev, struct device_attribute *attr, char *buf){ const char *output; if (dev->power.runtime_error) { output = "error"; } else if (dev->power.disable_depth) { output = "unsupported"; } else { switch (dev->power.runtime_status) { case RPM_SUSPENDED: output = "suspended"; break; case RPM_SUSPENDING: output = "suspending"; break; case RPM_RESUMING: output = "resuming"; break; case RPM_ACTIVE: output = "active"; break; default: return -EIO; } } return sysfs_emit(buf, "%s\n", output);} static DEVICE_ATTR_RO(runtime_status); static ssize_t autosuspend_delay_ms_show(struct device *dev, struct device_attribute *attr, char *buf){ if (!dev->power.use_autosuspend) return -EIO; return sysfs_emit(buf, "%d\n", dev->power.autosuspend_delay);} static ssize_t autosuspend_delay_ms_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n){ long delay; if (!dev->power.use_autosuspend) return -EIO; if (kstrtol(buf, 10, &delay) != 0 || delay != (int) delay) return -EINVAL; device_lock(dev); pm_runtime_set_autosuspend_delay(dev, delay); device_unlock(dev); return n;} static DEVICE_ATTR_RW(autosuspend_delay_ms); static ssize_t pm_qos_resume_latency_us_show(struct device *dev, struct device_attribute *attr, char *buf){ s32 value = dev_pm_qos_requested_resume_latency(dev); if (value == 0) return sysfs_emit(buf, "n/a\n"); if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) value = 0; return sysfs_emit(buf, "%d\n", value);} static ssize_t pm_qos_resume_latency_us_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n){ s32 value; int ret; if (!kstrtos32(buf, 0, &value)) { /* * Prevent users from writing negative or "no constraint" values * directly. */ if (value < 0 || value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) return -EINVAL; if (value == 0) value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; } else if (sysfs_streq(buf, "n/a")) { value = 0; } else { return -EINVAL; } ret = dev_pm_qos_update_request(dev->power.qos->resume_latency_req, value); return ret < 0 ? ret : n;} static DEVICE_ATTR_RW(pm_qos_resume_latency_us); static ssize_t pm_qos_latency_tolerance_us_show(struct device *dev, struct device_attribute *attr, char *buf){ s32 value = dev_pm_qos_get_user_latency_tolerance(dev); if (value < 0) return sysfs_emit(buf, "%s\n", "auto"); if (value == PM_QOS_LATENCY_ANY) return sysfs_emit(buf, "%s\n", "any"); return sysfs_emit(buf, "%d\n", value);} static ssize_t pm_qos_latency_tolerance_us_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n){ s32 value; int ret; if (kstrtos32(buf, 0, &value) == 0) { /* Users can't write negative values directly */ if (value < 0) return -EINVAL; } else { if (sysfs_streq(buf, "auto")) value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; else if (sysfs_streq(buf, "any")) value = PM_QOS_LATENCY_ANY; else return -EINVAL; } ret = dev_pm_qos_update_user_latency_tolerance(dev, value); return ret < 0 ? ret : n;} static DEVICE_ATTR_RW(pm_qos_latency_tolerance_us); static ssize_t pm_qos_no_power_off_show(struct device *dev, struct device_attribute *attr, char *buf){ return sysfs_emit(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) & PM_QOS_FLAG_NO_POWER_OFF));} static ssize_t pm_qos_no_power_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n){ int ret; if (kstrtoint(buf, 0, &ret)) return -EINVAL; if (ret != 0 && ret != 1) return -EINVAL; ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret); return ret < 0 ? ret : n;} static DEVICE_ATTR_RW(pm_qos_no_power_off); #ifdef CONFIG_PM_SLEEPstatic const char _enabled[] = "enabled";static const char _disabled[] = "disabled"; static ssize_t wakeup_show(struct device *dev, struct device_attribute *attr, char *buf){ return sysfs_emit(buf, "%s\n", device_can_wakeup(dev) ? (device_may_wakeup(dev) ? _enabled : _disabled) : "");} static ssize_t wakeup_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n){ if (!device_can_wakeup(dev)) return -EINVAL; if (sysfs_streq(buf, _enabled)) device_set_wakeup_enable(dev, 1); else if (sysfs_streq(buf, _disabled)) device_set_wakeup_enable(dev, 0); else return -EINVAL; return n;} static DEVICE_ATTR_RW(wakeup); static ssize_t wakeup_count_show(struct device *dev, struct device_attribute *attr, char *buf){ unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->wakeup_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count);} static DEVICE_ATTR_RO(wakeup_count); static ssize_t wakeup_active_count_show(struct device *dev, struct device_attribute *attr, char *buf){ unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->active_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count);} static DEVICE_ATTR_RO(wakeup_active_count); static ssize_t wakeup_abort_count_show(struct device *dev, struct device_attribute *attr, char *buf){ unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->wakeup_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count);} static DEVICE_ATTR_RO(wakeup_abort_count); static ssize_t wakeup_expire_count_show(struct device *dev, struct device_attribute *attr, char *buf){ unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->expire_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count);} static DEVICE_ATTR_RO(wakeup_expire_count); static ssize_t wakeup_active_show(struct device *dev, struct device_attribute *attr, char *buf){ unsigned int active; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { active = dev->power.wakeup->active; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%u\n", active);} static DEVICE_ATTR_RO(wakeup_active); static ssize_t wakeup_total_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf){ s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { msec = ktime_to_ms(dev->power.wakeup->total_time); enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lld\n", msec);} static DEVICE_ATTR_RO(wakeup_total_time_ms); static ssize_t wakeup_max_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf){ s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { msec = ktime_to_ms(dev->power.wakeup->max_time); enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lld\n", msec);} static DEVICE_ATTR_RO(wakeup_max_time_ms); static ssize_t wakeup_last_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf){ s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) {Lines 1–500 of 835. Load more
// SPDX-License-Identifier: GPL-2.0 /* sysfs entries for device PM */ #include <linux/device.h> #include <linux/kobject.h> #include <linux/string.h> #include <linux/export.h> #include <linux/pm_qos.h> #include <linux/pm_runtime.h> #include <linux/atomic.h> #include <linux/jiffies.h> #include "power.h" /* * control - Report/change current runtime PM setting of the device * * Runtime power management of a device can be blocked with the help of * this attribute. All devices have one of the following two values for * the power/control file: * * + "auto\n" to allow the device to be power managed at run time; * + "on\n" to prevent the device from being power managed at run time; * * The default for all devices is "auto", which means that devices may be * subject to automatic power management, depending on their drivers. * Changing this attribute to "on" prevents the driver from power managing * the device at run time. Doing that while the device is suspended causes * it to be woken up. * * wakeup - Report/change current wakeup option for device * * Some devices support "wakeup" events, which are hardware signals * used to activate devices from suspended or low power states. Such * devices have one of three values for the sysfs power/wakeup file: * * + "enabled\n" to issue the events; * + "disabled\n" not to do so; or * + "\n" for temporary or permanent inability to issue wakeup. * * (For example, unconfigured USB devices can't issue wakeups.) * * Familiar examples of devices that can issue wakeup events include * keyboards and mice (both PS2 and USB styles), power buttons, modems, * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events * will wake the entire system from a suspend state; others may just * wake up the device (if the system as a whole is already active). * Some wakeup events use normal IRQ lines; other use special out * of band signaling. * * It is the responsibility of device drivers to enable (or disable) * wakeup signaling as part of changing device power states, respecting * the policy choices provided through the driver model. * * Devices may not be able to generate wakeup events from all power * states. Also, the events may be ignored in some configurations; * for example, they might need help from other devices that aren't * active, or which may have wakeup disabled. Some drivers rely on * wakeup events internally (unless they are disabled), keeping * their hardware in low power modes whenever they're unused. This * saves runtime power, without requiring system-wide sleep states. * * async - Report/change current async suspend setting for the device * * Asynchronous suspend and resume of the device during system-wide power * state transitions can be enabled by writing "enabled" to this file. * Analogously, if "disabled" is written to this file, the device will be * suspended and resumed synchronously. * * All devices have one of the following two values for power/async: * * + "enabled\n" to permit the asynchronous suspend/resume of the device; * + "disabled\n" to forbid it; * * NOTE: It generally is unsafe to permit the asynchronous suspend/resume * of a device unless it is certain that all of the PM dependencies of the * device are known to the PM core. However, for some devices this * attribute is set to "enabled" by bus type code or device drivers and in * that cases it should be safe to leave the default value. * * autosuspend_delay_ms - Report/change a device's autosuspend_delay value * * Some drivers don't want to carry out a runtime suspend as soon as a * device becomes idle; they want it always to remain idle for some period * of time before suspending it. This period is the autosuspend_delay * value (expressed in milliseconds) and it can be controlled by the user. * If the value is negative then the device will never be runtime * suspended. * * NOTE: The autosuspend_delay_ms attribute and the autosuspend_delay * value are used only if the driver calls pm_runtime_use_autosuspend(). * * wakeup_count - Report the number of wakeup events related to the device */ const char power_group_name[] = "power"; EXPORT_SYMBOL_GPL(power_group_name); static const char ctrl_auto[] = "auto"; static const char ctrl_on[] = "on"; static ssize_t control_show(struct device *dev, struct device_attribute *attr, char *buf) { return sysfs_emit(buf, "%s\n", dev->power.runtime_auto ? ctrl_auto : ctrl_on); } static ssize_t control_store(struct device * dev, struct device_attribute *attr, const char * buf, size_t n) { device_lock(dev); if (sysfs_streq(buf, ctrl_auto)) pm_runtime_allow(dev); else if (sysfs_streq(buf, ctrl_on)) pm_runtime_forbid(dev); else n = -EINVAL; device_unlock(dev); return n; } static DEVICE_ATTR_RW(control); static ssize_t runtime_active_time_show(struct device *dev, struct device_attribute *attr, char *buf) { u64 tmp = pm_runtime_active_time(dev); do_div(tmp, NSEC_PER_MSEC); return sysfs_emit(buf, "%llu\n", tmp); } static DEVICE_ATTR_RO(runtime_active_time); static ssize_t runtime_suspended_time_show(struct device *dev, struct device_attribute *attr, char *buf) { u64 tmp = pm_runtime_suspended_time(dev); do_div(tmp, NSEC_PER_MSEC); return sysfs_emit(buf, "%llu\n", tmp); } static DEVICE_ATTR_RO(runtime_suspended_time); static ssize_t runtime_status_show(struct device *dev, struct device_attribute *attr, char *buf) { const char *output; if (dev->power.runtime_error) { output = "error"; } else if (dev->power.disable_depth) { output = "unsupported"; } else { switch (dev->power.runtime_status) { case RPM_SUSPENDED: output = "suspended"; break; case RPM_SUSPENDING: output = "suspending"; break; case RPM_RESUMING: output = "resuming"; break; case RPM_ACTIVE: output = "active"; break; default: return -EIO; } } return sysfs_emit(buf, "%s\n", output); } static DEVICE_ATTR_RO(runtime_status); static ssize_t autosuspend_delay_ms_show(struct device *dev, struct device_attribute *attr, char *buf) { if (!dev->power.use_autosuspend) return -EIO; return sysfs_emit(buf, "%d\n", dev->power.autosuspend_delay); } static ssize_t autosuspend_delay_ms_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { long delay; if (!dev->power.use_autosuspend) return -EIO; if (kstrtol(buf, 10, &delay) != 0 || delay != (int) delay) return -EINVAL; device_lock(dev); pm_runtime_set_autosuspend_delay(dev, delay); device_unlock(dev); return n; } static DEVICE_ATTR_RW(autosuspend_delay_ms); static ssize_t pm_qos_resume_latency_us_show(struct device *dev, struct device_attribute *attr, char *buf) { s32 value = dev_pm_qos_requested_resume_latency(dev); if (value == 0) return sysfs_emit(buf, "n/a\n"); if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) value = 0; return sysfs_emit(buf, "%d\n", value); } static ssize_t pm_qos_resume_latency_us_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { s32 value; int ret; if (!kstrtos32(buf, 0, &value)) { /* * Prevent users from writing negative or "no constraint" values * directly. */ if (value < 0 || value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT) return -EINVAL; if (value == 0) value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; } else if (sysfs_streq(buf, "n/a")) { value = 0; } else { return -EINVAL; } ret = dev_pm_qos_update_request(dev->power.qos->resume_latency_req, value); return ret < 0 ? ret : n; } static DEVICE_ATTR_RW(pm_qos_resume_latency_us); static ssize_t pm_qos_latency_tolerance_us_show(struct device *dev, struct device_attribute *attr, char *buf) { s32 value = dev_pm_qos_get_user_latency_tolerance(dev); if (value < 0) return sysfs_emit(buf, "%s\n", "auto"); if (value == PM_QOS_LATENCY_ANY) return sysfs_emit(buf, "%s\n", "any"); return sysfs_emit(buf, "%d\n", value); } static ssize_t pm_qos_latency_tolerance_us_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { s32 value; int ret; if (kstrtos32(buf, 0, &value) == 0) { /* Users can't write negative values directly */ if (value < 0) return -EINVAL; } else { if (sysfs_streq(buf, "auto")) value = PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT; else if (sysfs_streq(buf, "any")) value = PM_QOS_LATENCY_ANY; else return -EINVAL; } ret = dev_pm_qos_update_user_latency_tolerance(dev, value); return ret < 0 ? ret : n; } static DEVICE_ATTR_RW(pm_qos_latency_tolerance_us); static ssize_t pm_qos_no_power_off_show(struct device *dev, struct device_attribute *attr, char *buf) { return sysfs_emit(buf, "%d\n", !!(dev_pm_qos_requested_flags(dev) & PM_QOS_FLAG_NO_POWER_OFF)); } static ssize_t pm_qos_no_power_off_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { int ret; if (kstrtoint(buf, 0, &ret)) return -EINVAL; if (ret != 0 && ret != 1) return -EINVAL; ret = dev_pm_qos_update_flags(dev, PM_QOS_FLAG_NO_POWER_OFF, ret); return ret < 0 ? ret : n; } static DEVICE_ATTR_RW(pm_qos_no_power_off); #ifdef CONFIG_PM_SLEEP static const char _enabled[] = "enabled"; static const char _disabled[] = "disabled"; static ssize_t wakeup_show(struct device *dev, struct device_attribute *attr, char *buf) { return sysfs_emit(buf, "%s\n", device_can_wakeup(dev) ? (device_may_wakeup(dev) ? _enabled : _disabled) : ""); } static ssize_t wakeup_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { if (!device_can_wakeup(dev)) return -EINVAL; if (sysfs_streq(buf, _enabled)) device_set_wakeup_enable(dev, 1); else if (sysfs_streq(buf, _disabled)) device_set_wakeup_enable(dev, 0); else return -EINVAL; return n; } static DEVICE_ATTR_RW(wakeup); static ssize_t wakeup_count_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->wakeup_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count); } static DEVICE_ATTR_RO(wakeup_count); static ssize_t wakeup_active_count_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->active_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count); } static DEVICE_ATTR_RO(wakeup_active_count); static ssize_t wakeup_abort_count_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->wakeup_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count); } static DEVICE_ATTR_RO(wakeup_abort_count); static ssize_t wakeup_expire_count_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned long count; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { count = dev->power.wakeup->expire_count; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lu\n", count); } static DEVICE_ATTR_RO(wakeup_expire_count); static ssize_t wakeup_active_show(struct device *dev, struct device_attribute *attr, char *buf) { unsigned int active; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { active = dev->power.wakeup->active; enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%u\n", active); } static DEVICE_ATTR_RO(wakeup_active); static ssize_t wakeup_total_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf) { s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { msec = ktime_to_ms(dev->power.wakeup->total_time); enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lld\n", msec); } static DEVICE_ATTR_RO(wakeup_total_time_ms); static ssize_t wakeup_max_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf) { s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) { msec = ktime_to_ms(dev->power.wakeup->max_time); enabled = true; } spin_unlock_irq(&dev->power.lock); if (!enabled) return sysfs_emit(buf, "\n"); return sysfs_emit(buf, "%lld\n", msec); } static DEVICE_ATTR_RO(wakeup_max_time_ms); static ssize_t wakeup_last_time_ms_show(struct device *dev, struct device_attribute *attr, char *buf) { s64 msec; bool enabled = false; spin_lock_irq(&dev->power.lock); if (dev->power.wakeup) {