// SPDX-License-Identifier: GPL-2.0-or-later/* * HackRF driver * * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> */ #include <linux/module.h>#include <linux/slab.h>#include <linux/usb.h>#include <media/v4l2-device.h>#include <media/v4l2-ioctl.h>#include <media/v4l2-ctrls.h>#include <media/v4l2-event.h>#include <media/videobuf2-v4l2.h>#include <media/videobuf2-vmalloc.h> /* * Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too * strong signal or transmitting to bad antenna. * Set RF gain control to 'grabbed' state by default for sure. */static bool hackrf_enable_rf_gain_ctrl;module_param_named(enable_rf_gain_ctrl, hackrf_enable_rf_gain_ctrl, bool, 0644);MODULE_PARM_DESC(enable_rf_gain_ctrl, "enable RX/TX RF amplifier control (warn: could damage amplifier)"); /* HackRF USB API commands (from HackRF Library) */enum { CMD_SET_TRANSCEIVER_MODE = 0x01, CMD_SAMPLE_RATE_SET = 0x06, CMD_BASEBAND_FILTER_BANDWIDTH_SET = 0x07, CMD_BOARD_ID_READ = 0x0e, CMD_VERSION_STRING_READ = 0x0f, CMD_SET_FREQ = 0x10, CMD_AMP_ENABLE = 0x11, CMD_SET_LNA_GAIN = 0x13, CMD_SET_VGA_GAIN = 0x14, CMD_SET_TXVGA_GAIN = 0x15,}; /* * bEndpointAddress 0x81 EP 1 IN * Transfer Type Bulk * wMaxPacketSize 0x0200 1x 512 bytes */#define MAX_BULK_BUFS (6)#define BULK_BUFFER_SIZE (128 * 512) static const struct v4l2_frequency_band bands_adc_dac[] = { { .tuner = 0, .type = V4L2_TUNER_SDR, .index = 0, .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, .rangelow = 200000, .rangehigh = 24000000, },}; static const struct v4l2_frequency_band bands_rx_tx[] = { { .tuner = 1, .type = V4L2_TUNER_RF, .index = 0, .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, .rangelow = 1, .rangehigh = 4294967294LL, /* max u32, hw goes over 7GHz */ },}; /* stream formats */struct hackrf_format { u32 pixelformat; u32 buffersize;}; /* format descriptions for capture and preview */static struct hackrf_format formats[] = { { .pixelformat = V4L2_SDR_FMT_CS8, .buffersize = BULK_BUFFER_SIZE, },}; static const unsigned int NUM_FORMATS = ARRAY_SIZE(formats); /* intermediate buffers with raw data from the USB device */struct hackrf_buffer { struct vb2_v4l2_buffer vb; struct list_head list;}; struct hackrf_dev {#define USB_STATE_URB_BUF 1 /* XXX: set manually */#define RX_ON 4#define TX_ON 5#define RX_ADC_FREQUENCY 11#define TX_DAC_FREQUENCY 12#define RX_BANDWIDTH 13#define TX_BANDWIDTH 14#define RX_RF_FREQUENCY 15#define TX_RF_FREQUENCY 16#define RX_RF_GAIN 17#define TX_RF_GAIN 18#define RX_IF_GAIN 19#define RX_LNA_GAIN 20#define TX_LNA_GAIN 21 unsigned long flags; struct usb_interface *intf; struct device *dev; struct usb_device *udev; struct video_device rx_vdev; struct video_device tx_vdev; struct v4l2_device v4l2_dev; /* videobuf2 queue and queued buffers list */ struct vb2_queue rx_vb2_queue; struct vb2_queue tx_vb2_queue; struct list_head rx_buffer_list; struct list_head tx_buffer_list; spinlock_t buffer_list_lock; /* Protects buffer_list */ unsigned int sequence; /* Buffer sequence counter */ unsigned int vb_full; /* vb is full and packets dropped */ unsigned int vb_empty; /* vb is empty and packets dropped */ /* Note if taking both locks v4l2_lock must always be locked first! */ struct mutex v4l2_lock; /* Protects everything else */ struct mutex vb_queue_lock; /* Protects vb_queue */ struct urb *urb_list[MAX_BULK_BUFS]; int buf_num; unsigned long buf_size; u8 *buf_list[MAX_BULK_BUFS]; dma_addr_t dma_addr[MAX_BULK_BUFS]; int urbs_initialized; int urbs_submitted; /* USB control message buffer */ #define BUF_SIZE 24 u8 buf[BUF_SIZE]; /* Current configuration */ unsigned int f_adc; unsigned int f_dac; unsigned int f_rx; unsigned int f_tx; u32 pixelformat; u32 buffersize; /* Controls */ struct v4l2_ctrl_handler rx_ctrl_handler; struct v4l2_ctrl *rx_bandwidth_auto; struct v4l2_ctrl *rx_bandwidth; struct v4l2_ctrl *rx_rf_gain; struct v4l2_ctrl *rx_lna_gain; struct v4l2_ctrl *rx_if_gain; struct v4l2_ctrl_handler tx_ctrl_handler; struct v4l2_ctrl *tx_bandwidth_auto; struct v4l2_ctrl *tx_bandwidth; struct v4l2_ctrl *tx_rf_gain; struct v4l2_ctrl *tx_lna_gain; /* Sample rate calc */ unsigned long jiffies_next; unsigned int sample; unsigned int sample_measured;}; #define hackrf_dbg_usb_control_msg(_dev, _r, _t, _v, _i, _b, _l) { \ char *_direction; \ if (_t & USB_DIR_IN) \ _direction = "<<<"; \ else \ _direction = ">>>"; \ dev_dbg(_dev, "%02x %02x %02x %02x %02x %02x %02x %02x %s %*ph\n", \ _t, _r, _v & 0xff, _v >> 8, _i & 0xff, \ _i >> 8, _l & 0xff, _l >> 8, _direction, _l, _b); \} /* execute firmware command */static int hackrf_ctrl_msg(struct hackrf_dev *dev, u8 request, u16 value, u16 index, u8 *data, u16 size){ int ret; unsigned int pipe; u8 requesttype; switch (request) { case CMD_SET_TRANSCEIVER_MODE: case CMD_SET_FREQ: case CMD_AMP_ENABLE: case CMD_SAMPLE_RATE_SET: case CMD_BASEBAND_FILTER_BANDWIDTH_SET: pipe = usb_sndctrlpipe(dev->udev, 0); requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); break; case CMD_BOARD_ID_READ: case CMD_VERSION_STRING_READ: case CMD_SET_LNA_GAIN: case CMD_SET_VGA_GAIN: case CMD_SET_TXVGA_GAIN: pipe = usb_rcvctrlpipe(dev->udev, 0); requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); break; default: dev_err(dev->dev, "Unknown command %02x\n", request); ret = -EINVAL; goto err; } /* write request */ if (!(requesttype & USB_DIR_IN)) memcpy(dev->buf, data, size); ret = usb_control_msg(dev->udev, pipe, request, requesttype, value, index, dev->buf, size, 1000); hackrf_dbg_usb_control_msg(dev->dev, request, requesttype, value, index, dev->buf, size); if (ret < 0) { dev_err(dev->dev, "usb_control_msg() failed %d request %02x\n", ret, request); goto err; } /* read request */ if (requesttype & USB_DIR_IN) memcpy(data, dev->buf, size); return 0;err: return ret;} static int hackrf_set_params(struct hackrf_dev *dev){ struct usb_interface *intf = dev->intf; int ret, i; u8 buf[8], u8tmp; unsigned int uitmp, uitmp1, uitmp2; const bool rx = test_bit(RX_ON, &dev->flags); const bool tx = test_bit(TX_ON, &dev->flags); static const struct { u32 freq; } bandwidth_lut[] = { { 1750000}, /* 1.75 MHz */ { 2500000}, /* 2.5 MHz */ { 3500000}, /* 3.5 MHz */ { 5000000}, /* 5 MHz */ { 5500000}, /* 5.5 MHz */ { 6000000}, /* 6 MHz */ { 7000000}, /* 7 MHz */ { 8000000}, /* 8 MHz */ { 9000000}, /* 9 MHz */ {10000000}, /* 10 MHz */ {12000000}, /* 12 MHz */ {14000000}, /* 14 MHz */ {15000000}, /* 15 MHz */ {20000000}, /* 20 MHz */ {24000000}, /* 24 MHz */ {28000000}, /* 28 MHz */ }; if (!rx && !tx) { dev_dbg(&intf->dev, "device is sleeping\n"); return 0; } /* ADC / DAC frequency */ if (rx && test_and_clear_bit(RX_ADC_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "RX ADC frequency=%u Hz\n", dev->f_adc); uitmp1 = dev->f_adc; uitmp2 = 1; set_bit(TX_DAC_FREQUENCY, &dev->flags); } else if (tx && test_and_clear_bit(TX_DAC_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "TX DAC frequency=%u Hz\n", dev->f_dac); uitmp1 = dev->f_dac; uitmp2 = 1; set_bit(RX_ADC_FREQUENCY, &dev->flags); } else { uitmp1 = uitmp2 = 0; } if (uitmp1 || uitmp2) { buf[0] = (uitmp1 >> 0) & 0xff; buf[1] = (uitmp1 >> 8) & 0xff; buf[2] = (uitmp1 >> 16) & 0xff; buf[3] = (uitmp1 >> 24) & 0xff; buf[4] = (uitmp2 >> 0) & 0xff; buf[5] = (uitmp2 >> 8) & 0xff; buf[6] = (uitmp2 >> 16) & 0xff; buf[7] = (uitmp2 >> 24) & 0xff; ret = hackrf_ctrl_msg(dev, CMD_SAMPLE_RATE_SET, 0, 0, buf, 8); if (ret) goto err; } /* bandwidth */ if (rx && test_and_clear_bit(RX_BANDWIDTH, &dev->flags)) { if (dev->rx_bandwidth_auto->val == true) uitmp = dev->f_adc; else uitmp = dev->rx_bandwidth->val; for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { if (uitmp <= bandwidth_lut[i].freq) { uitmp = bandwidth_lut[i].freq; break; } } dev->rx_bandwidth->val = uitmp; dev->rx_bandwidth->cur.val = uitmp; dev_dbg(&intf->dev, "RX bandwidth selected=%u\n", uitmp); set_bit(TX_BANDWIDTH, &dev->flags); } else if (tx && test_and_clear_bit(TX_BANDWIDTH, &dev->flags)) { if (dev->tx_bandwidth_auto->val == true) uitmp = dev->f_dac; else uitmp = dev->tx_bandwidth->val; for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { if (uitmp <= bandwidth_lut[i].freq) { uitmp = bandwidth_lut[i].freq; break; } } dev->tx_bandwidth->val = uitmp; dev->tx_bandwidth->cur.val = uitmp; dev_dbg(&intf->dev, "TX bandwidth selected=%u\n", uitmp); set_bit(RX_BANDWIDTH, &dev->flags); } else { uitmp = 0; } if (uitmp) { uitmp1 = uitmp2 = 0; uitmp1 |= ((uitmp >> 0) & 0xff) << 0; uitmp1 |= ((uitmp >> 8) & 0xff) << 8; uitmp2 |= ((uitmp >> 16) & 0xff) << 0; uitmp2 |= ((uitmp >> 24) & 0xff) << 8; ret = hackrf_ctrl_msg(dev, CMD_BASEBAND_FILTER_BANDWIDTH_SET, uitmp1, uitmp2, NULL, 0); if (ret) goto err; } /* RX / TX RF frequency */ if (rx && test_and_clear_bit(RX_RF_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "RX RF frequency=%u Hz\n", dev->f_rx); uitmp1 = dev->f_rx / 1000000; uitmp2 = dev->f_rx % 1000000; set_bit(TX_RF_FREQUENCY, &dev->flags); } else if (tx && test_and_clear_bit(TX_RF_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "TX RF frequency=%u Hz\n", dev->f_tx); uitmp1 = dev->f_tx / 1000000; uitmp2 = dev->f_tx % 1000000; set_bit(RX_RF_FREQUENCY, &dev->flags); } else { uitmp1 = uitmp2 = 0; } if (uitmp1 || uitmp2) { buf[0] = (uitmp1 >> 0) & 0xff; buf[1] = (uitmp1 >> 8) & 0xff; buf[2] = (uitmp1 >> 16) & 0xff; buf[3] = (uitmp1 >> 24) & 0xff; buf[4] = (uitmp2 >> 0) & 0xff; buf[5] = (uitmp2 >> 8) & 0xff; buf[6] = (uitmp2 >> 16) & 0xff; buf[7] = (uitmp2 >> 24) & 0xff; ret = hackrf_ctrl_msg(dev, CMD_SET_FREQ, 0, 0, buf, 8); if (ret) goto err; } /* RX RF gain */ if (rx && test_and_clear_bit(RX_RF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "RX RF gain val=%d->%d\n", dev->rx_rf_gain->cur.val, dev->rx_rf_gain->val); u8tmp = (dev->rx_rf_gain->val) ? 1 : 0; ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); if (ret) goto err; set_bit(TX_RF_GAIN, &dev->flags); } /* TX RF gain */ if (tx && test_and_clear_bit(TX_RF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "TX RF gain val=%d->%d\n", dev->tx_rf_gain->cur.val, dev->tx_rf_gain->val); u8tmp = (dev->tx_rf_gain->val) ? 1 : 0; ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); if (ret) goto err; set_bit(RX_RF_GAIN, &dev->flags); } /* RX LNA gain */ if (rx && test_and_clear_bit(RX_LNA_GAIN, &dev->flags)) { dev_dbg(dev->dev, "RX LNA gain val=%d->%d\n", dev->rx_lna_gain->cur.val, dev->rx_lna_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_LNA_GAIN, 0, dev->rx_lna_gain->val, &u8tmp, 1); if (ret) goto err; } /* RX IF gain */ if (rx && test_and_clear_bit(RX_IF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "IF gain val=%d->%d\n", dev->rx_if_gain->cur.val, dev->rx_if_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_VGA_GAIN, 0, dev->rx_if_gain->val, &u8tmp, 1); if (ret) goto err; } /* TX LNA gain */ if (tx && test_and_clear_bit(TX_LNA_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "TX LNA gain val=%d->%d\n", dev->tx_lna_gain->cur.val, dev->tx_lna_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_TXVGA_GAIN, 0, dev->tx_lna_gain->val, &u8tmp, 1); if (ret) goto err; } return 0;err: dev_dbg(&intf->dev, "failed=%d\n", ret); return ret;} /* Private functions */static struct hackrf_buffer *hackrf_get_next_buffer(struct hackrf_dev *dev, struct list_head *buffer_list){ unsigned long flags; struct hackrf_buffer *buffer = NULL; spin_lock_irqsave(&dev->buffer_list_lock, flags); if (list_empty(buffer_list)) goto leave; buffer = list_entry(buffer_list->next, struct hackrf_buffer, list); list_del(&buffer->list);leave: spin_unlock_irqrestore(&dev->buffer_list_lock, flags); return buffer;} static void hackrf_copy_stream(struct hackrf_dev *dev, void *dst, void *src, unsigned int src_len){ memcpy(dst, src, src_len); /* calculate sample rate and output it in 10 seconds intervals */ if (unlikely(time_is_before_jiffies(dev->jiffies_next))) { #define MSECS 10000UL unsigned int msecs = jiffies_to_msecs(jiffies - dev->jiffies_next + msecs_to_jiffies(MSECS)); unsigned int samples = dev->sample - dev->sample_measured; dev->jiffies_next = jiffies + msecs_to_jiffies(MSECS); dev->sample_measured = dev->sample; dev_dbg(dev->dev, "slen=%u samples=%u msecs=%u sample rate=%lu\n", src_len, samples, msecs, samples * 1000UL / msecs); } /* total number of samples */ dev->sample += src_len / 2;} /* * This gets called for the bulk stream pipe. This is done in interrupt * time, so it has to be fast, not crash, and not stall. Neat. */static void hackrf_urb_complete_in(struct urb *urb){ struct hackrf_dev *dev = urb->context; struct usb_interface *intf = dev->intf; struct hackrf_buffer *buffer; unsigned int len; dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status, urb->actual_length, urb->transfer_buffer_length); switch (urb->status) { case 0: /* success */ case -ETIMEDOUT: /* NAK */ break; case -ECONNRESET: /* kill */ case -ENOENT: case -ESHUTDOWN: return; default: /* error */ dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status);Lines 1–500 of 1549. Load more
// SPDX-License-Identifier: GPL-2.0-or-later /* * HackRF driver * * Copyright (C) 2014 Antti Palosaari <crope@iki.fi> */ #include <linux/module.h> #include <linux/slab.h> #include <linux/usb.h> #include <media/v4l2-device.h> #include <media/v4l2-ioctl.h> #include <media/v4l2-ctrls.h> #include <media/v4l2-event.h> #include <media/videobuf2-v4l2.h> #include <media/videobuf2-vmalloc.h> /* * Used Avago MGA-81563 RF amplifier could be destroyed pretty easily with too * strong signal or transmitting to bad antenna. * Set RF gain control to 'grabbed' state by default for sure. */ static bool hackrf_enable_rf_gain_ctrl; module_param_named(enable_rf_gain_ctrl, hackrf_enable_rf_gain_ctrl, bool, 0644); MODULE_PARM_DESC(enable_rf_gain_ctrl, "enable RX/TX RF amplifier control (warn: could damage amplifier)"); /* HackRF USB API commands (from HackRF Library) */ enum { CMD_SET_TRANSCEIVER_MODE = 0x01, CMD_SAMPLE_RATE_SET = 0x06, CMD_BASEBAND_FILTER_BANDWIDTH_SET = 0x07, CMD_BOARD_ID_READ = 0x0e, CMD_VERSION_STRING_READ = 0x0f, CMD_SET_FREQ = 0x10, CMD_AMP_ENABLE = 0x11, CMD_SET_LNA_GAIN = 0x13, CMD_SET_VGA_GAIN = 0x14, CMD_SET_TXVGA_GAIN = 0x15, }; /* * bEndpointAddress 0x81 EP 1 IN * Transfer Type Bulk * wMaxPacketSize 0x0200 1x 512 bytes */ #define MAX_BULK_BUFS (6) #define BULK_BUFFER_SIZE (128 * 512) static const struct v4l2_frequency_band bands_adc_dac[] = { { .tuner = 0, .type = V4L2_TUNER_SDR, .index = 0, .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, .rangelow = 200000, .rangehigh = 24000000, }, }; static const struct v4l2_frequency_band bands_rx_tx[] = { { .tuner = 1, .type = V4L2_TUNER_RF, .index = 0, .capability = V4L2_TUNER_CAP_1HZ | V4L2_TUNER_CAP_FREQ_BANDS, .rangelow = 1, .rangehigh = 4294967294LL, /* max u32, hw goes over 7GHz */ }, }; /* stream formats */ struct hackrf_format { u32 pixelformat; u32 buffersize; }; /* format descriptions for capture and preview */ static struct hackrf_format formats[] = { { .pixelformat = V4L2_SDR_FMT_CS8, .buffersize = BULK_BUFFER_SIZE, }, }; static const unsigned int NUM_FORMATS = ARRAY_SIZE(formats); /* intermediate buffers with raw data from the USB device */ struct hackrf_buffer { struct vb2_v4l2_buffer vb; struct list_head list; }; struct hackrf_dev { #define USB_STATE_URB_BUF 1 /* XXX: set manually */ #define RX_ON 4 #define TX_ON 5 #define RX_ADC_FREQUENCY 11 #define TX_DAC_FREQUENCY 12 #define RX_BANDWIDTH 13 #define TX_BANDWIDTH 14 #define RX_RF_FREQUENCY 15 #define TX_RF_FREQUENCY 16 #define RX_RF_GAIN 17 #define TX_RF_GAIN 18 #define RX_IF_GAIN 19 #define RX_LNA_GAIN 20 #define TX_LNA_GAIN 21 unsigned long flags; struct usb_interface *intf; struct device *dev; struct usb_device *udev; struct video_device rx_vdev; struct video_device tx_vdev; struct v4l2_device v4l2_dev; /* videobuf2 queue and queued buffers list */ struct vb2_queue rx_vb2_queue; struct vb2_queue tx_vb2_queue; struct list_head rx_buffer_list; struct list_head tx_buffer_list; spinlock_t buffer_list_lock; /* Protects buffer_list */ unsigned int sequence; /* Buffer sequence counter */ unsigned int vb_full; /* vb is full and packets dropped */ unsigned int vb_empty; /* vb is empty and packets dropped */ /* Note if taking both locks v4l2_lock must always be locked first! */ struct mutex v4l2_lock; /* Protects everything else */ struct mutex vb_queue_lock; /* Protects vb_queue */ struct urb *urb_list[MAX_BULK_BUFS]; int buf_num; unsigned long buf_size; u8 *buf_list[MAX_BULK_BUFS]; dma_addr_t dma_addr[MAX_BULK_BUFS]; int urbs_initialized; int urbs_submitted; /* USB control message buffer */ #define BUF_SIZE 24 u8 buf[BUF_SIZE]; /* Current configuration */ unsigned int f_adc; unsigned int f_dac; unsigned int f_rx; unsigned int f_tx; u32 pixelformat; u32 buffersize; /* Controls */ struct v4l2_ctrl_handler rx_ctrl_handler; struct v4l2_ctrl *rx_bandwidth_auto; struct v4l2_ctrl *rx_bandwidth; struct v4l2_ctrl *rx_rf_gain; struct v4l2_ctrl *rx_lna_gain; struct v4l2_ctrl *rx_if_gain; struct v4l2_ctrl_handler tx_ctrl_handler; struct v4l2_ctrl *tx_bandwidth_auto; struct v4l2_ctrl *tx_bandwidth; struct v4l2_ctrl *tx_rf_gain; struct v4l2_ctrl *tx_lna_gain; /* Sample rate calc */ unsigned long jiffies_next; unsigned int sample; unsigned int sample_measured; }; #define hackrf_dbg_usb_control_msg(_dev, _r, _t, _v, _i, _b, _l) { \ char *_direction; \ if (_t & USB_DIR_IN) \ _direction = "<<<"; \ else \ _direction = ">>>"; \ dev_dbg(_dev, "%02x %02x %02x %02x %02x %02x %02x %02x %s %*ph\n", \ _t, _r, _v & 0xff, _v >> 8, _i & 0xff, \ _i >> 8, _l & 0xff, _l >> 8, _direction, _l, _b); \ } /* execute firmware command */ static int hackrf_ctrl_msg(struct hackrf_dev *dev, u8 request, u16 value, u16 index, u8 *data, u16 size) { int ret; unsigned int pipe; u8 requesttype; switch (request) { case CMD_SET_TRANSCEIVER_MODE: case CMD_SET_FREQ: case CMD_AMP_ENABLE: case CMD_SAMPLE_RATE_SET: case CMD_BASEBAND_FILTER_BANDWIDTH_SET: pipe = usb_sndctrlpipe(dev->udev, 0); requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); break; case CMD_BOARD_ID_READ: case CMD_VERSION_STRING_READ: case CMD_SET_LNA_GAIN: case CMD_SET_VGA_GAIN: case CMD_SET_TXVGA_GAIN: pipe = usb_rcvctrlpipe(dev->udev, 0); requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); break; default: dev_err(dev->dev, "Unknown command %02x\n", request); ret = -EINVAL; goto err; } /* write request */ if (!(requesttype & USB_DIR_IN)) memcpy(dev->buf, data, size); ret = usb_control_msg(dev->udev, pipe, request, requesttype, value, index, dev->buf, size, 1000); hackrf_dbg_usb_control_msg(dev->dev, request, requesttype, value, index, dev->buf, size); if (ret < 0) { dev_err(dev->dev, "usb_control_msg() failed %d request %02x\n", ret, request); goto err; } /* read request */ if (requesttype & USB_DIR_IN) memcpy(data, dev->buf, size); return 0; err: return ret; } static int hackrf_set_params(struct hackrf_dev *dev) { struct usb_interface *intf = dev->intf; int ret, i; u8 buf[8], u8tmp; unsigned int uitmp, uitmp1, uitmp2; const bool rx = test_bit(RX_ON, &dev->flags); const bool tx = test_bit(TX_ON, &dev->flags); static const struct { u32 freq; } bandwidth_lut[] = { { 1750000}, /* 1.75 MHz */ { 2500000}, /* 2.5 MHz */ { 3500000}, /* 3.5 MHz */ { 5000000}, /* 5 MHz */ { 5500000}, /* 5.5 MHz */ { 6000000}, /* 6 MHz */ { 7000000}, /* 7 MHz */ { 8000000}, /* 8 MHz */ { 9000000}, /* 9 MHz */ {10000000}, /* 10 MHz */ {12000000}, /* 12 MHz */ {14000000}, /* 14 MHz */ {15000000}, /* 15 MHz */ {20000000}, /* 20 MHz */ {24000000}, /* 24 MHz */ {28000000}, /* 28 MHz */ }; if (!rx && !tx) { dev_dbg(&intf->dev, "device is sleeping\n"); return 0; } /* ADC / DAC frequency */ if (rx && test_and_clear_bit(RX_ADC_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "RX ADC frequency=%u Hz\n", dev->f_adc); uitmp1 = dev->f_adc; uitmp2 = 1; set_bit(TX_DAC_FREQUENCY, &dev->flags); } else if (tx && test_and_clear_bit(TX_DAC_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "TX DAC frequency=%u Hz\n", dev->f_dac); uitmp1 = dev->f_dac; uitmp2 = 1; set_bit(RX_ADC_FREQUENCY, &dev->flags); } else { uitmp1 = uitmp2 = 0; } if (uitmp1 || uitmp2) { buf[0] = (uitmp1 >> 0) & 0xff; buf[1] = (uitmp1 >> 8) & 0xff; buf[2] = (uitmp1 >> 16) & 0xff; buf[3] = (uitmp1 >> 24) & 0xff; buf[4] = (uitmp2 >> 0) & 0xff; buf[5] = (uitmp2 >> 8) & 0xff; buf[6] = (uitmp2 >> 16) & 0xff; buf[7] = (uitmp2 >> 24) & 0xff; ret = hackrf_ctrl_msg(dev, CMD_SAMPLE_RATE_SET, 0, 0, buf, 8); if (ret) goto err; } /* bandwidth */ if (rx && test_and_clear_bit(RX_BANDWIDTH, &dev->flags)) { if (dev->rx_bandwidth_auto->val == true) uitmp = dev->f_adc; else uitmp = dev->rx_bandwidth->val; for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { if (uitmp <= bandwidth_lut[i].freq) { uitmp = bandwidth_lut[i].freq; break; } } dev->rx_bandwidth->val = uitmp; dev->rx_bandwidth->cur.val = uitmp; dev_dbg(&intf->dev, "RX bandwidth selected=%u\n", uitmp); set_bit(TX_BANDWIDTH, &dev->flags); } else if (tx && test_and_clear_bit(TX_BANDWIDTH, &dev->flags)) { if (dev->tx_bandwidth_auto->val == true) uitmp = dev->f_dac; else uitmp = dev->tx_bandwidth->val; for (i = 0; i < ARRAY_SIZE(bandwidth_lut); i++) { if (uitmp <= bandwidth_lut[i].freq) { uitmp = bandwidth_lut[i].freq; break; } } dev->tx_bandwidth->val = uitmp; dev->tx_bandwidth->cur.val = uitmp; dev_dbg(&intf->dev, "TX bandwidth selected=%u\n", uitmp); set_bit(RX_BANDWIDTH, &dev->flags); } else { uitmp = 0; } if (uitmp) { uitmp1 = uitmp2 = 0; uitmp1 |= ((uitmp >> 0) & 0xff) << 0; uitmp1 |= ((uitmp >> 8) & 0xff) << 8; uitmp2 |= ((uitmp >> 16) & 0xff) << 0; uitmp2 |= ((uitmp >> 24) & 0xff) << 8; ret = hackrf_ctrl_msg(dev, CMD_BASEBAND_FILTER_BANDWIDTH_SET, uitmp1, uitmp2, NULL, 0); if (ret) goto err; } /* RX / TX RF frequency */ if (rx && test_and_clear_bit(RX_RF_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "RX RF frequency=%u Hz\n", dev->f_rx); uitmp1 = dev->f_rx / 1000000; uitmp2 = dev->f_rx % 1000000; set_bit(TX_RF_FREQUENCY, &dev->flags); } else if (tx && test_and_clear_bit(TX_RF_FREQUENCY, &dev->flags)) { dev_dbg(&intf->dev, "TX RF frequency=%u Hz\n", dev->f_tx); uitmp1 = dev->f_tx / 1000000; uitmp2 = dev->f_tx % 1000000; set_bit(RX_RF_FREQUENCY, &dev->flags); } else { uitmp1 = uitmp2 = 0; } if (uitmp1 || uitmp2) { buf[0] = (uitmp1 >> 0) & 0xff; buf[1] = (uitmp1 >> 8) & 0xff; buf[2] = (uitmp1 >> 16) & 0xff; buf[3] = (uitmp1 >> 24) & 0xff; buf[4] = (uitmp2 >> 0) & 0xff; buf[5] = (uitmp2 >> 8) & 0xff; buf[6] = (uitmp2 >> 16) & 0xff; buf[7] = (uitmp2 >> 24) & 0xff; ret = hackrf_ctrl_msg(dev, CMD_SET_FREQ, 0, 0, buf, 8); if (ret) goto err; } /* RX RF gain */ if (rx && test_and_clear_bit(RX_RF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "RX RF gain val=%d->%d\n", dev->rx_rf_gain->cur.val, dev->rx_rf_gain->val); u8tmp = (dev->rx_rf_gain->val) ? 1 : 0; ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); if (ret) goto err; set_bit(TX_RF_GAIN, &dev->flags); } /* TX RF gain */ if (tx && test_and_clear_bit(TX_RF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "TX RF gain val=%d->%d\n", dev->tx_rf_gain->cur.val, dev->tx_rf_gain->val); u8tmp = (dev->tx_rf_gain->val) ? 1 : 0; ret = hackrf_ctrl_msg(dev, CMD_AMP_ENABLE, u8tmp, 0, NULL, 0); if (ret) goto err; set_bit(RX_RF_GAIN, &dev->flags); } /* RX LNA gain */ if (rx && test_and_clear_bit(RX_LNA_GAIN, &dev->flags)) { dev_dbg(dev->dev, "RX LNA gain val=%d->%d\n", dev->rx_lna_gain->cur.val, dev->rx_lna_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_LNA_GAIN, 0, dev->rx_lna_gain->val, &u8tmp, 1); if (ret) goto err; } /* RX IF gain */ if (rx && test_and_clear_bit(RX_IF_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "IF gain val=%d->%d\n", dev->rx_if_gain->cur.val, dev->rx_if_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_VGA_GAIN, 0, dev->rx_if_gain->val, &u8tmp, 1); if (ret) goto err; } /* TX LNA gain */ if (tx && test_and_clear_bit(TX_LNA_GAIN, &dev->flags)) { dev_dbg(&intf->dev, "TX LNA gain val=%d->%d\n", dev->tx_lna_gain->cur.val, dev->tx_lna_gain->val); ret = hackrf_ctrl_msg(dev, CMD_SET_TXVGA_GAIN, 0, dev->tx_lna_gain->val, &u8tmp, 1); if (ret) goto err; } return 0; err: dev_dbg(&intf->dev, "failed=%d\n", ret); return ret; } /* Private functions */ static struct hackrf_buffer *hackrf_get_next_buffer(struct hackrf_dev *dev, struct list_head *buffer_list) { unsigned long flags; struct hackrf_buffer *buffer = NULL; spin_lock_irqsave(&dev->buffer_list_lock, flags); if (list_empty(buffer_list)) goto leave; buffer = list_entry(buffer_list->next, struct hackrf_buffer, list); list_del(&buffer->list); leave: spin_unlock_irqrestore(&dev->buffer_list_lock, flags); return buffer; } static void hackrf_copy_stream(struct hackrf_dev *dev, void *dst, void *src, unsigned int src_len) { memcpy(dst, src, src_len); /* calculate sample rate and output it in 10 seconds intervals */ if (unlikely(time_is_before_jiffies(dev->jiffies_next))) { #define MSECS 10000UL unsigned int msecs = jiffies_to_msecs(jiffies - dev->jiffies_next + msecs_to_jiffies(MSECS)); unsigned int samples = dev->sample - dev->sample_measured; dev->jiffies_next = jiffies + msecs_to_jiffies(MSECS); dev->sample_measured = dev->sample; dev_dbg(dev->dev, "slen=%u samples=%u msecs=%u sample rate=%lu\n", src_len, samples, msecs, samples * 1000UL / msecs); } /* total number of samples */ dev->sample += src_len / 2; } /* * This gets called for the bulk stream pipe. This is done in interrupt * time, so it has to be fast, not crash, and not stall. Neat. */ static void hackrf_urb_complete_in(struct urb *urb) { struct hackrf_dev *dev = urb->context; struct usb_interface *intf = dev->intf; struct hackrf_buffer *buffer; unsigned int len; dev_dbg_ratelimited(&intf->dev, "status=%d length=%u/%u\n", urb->status, urb->actual_length, urb->transfer_buffer_length); switch (urb->status) { case 0: /* success */ case -ETIMEDOUT: /* NAK */ break; case -ECONNRESET: /* kill */ case -ENOENT: case -ESHUTDOWN: return; default: /* error */ dev_err_ratelimited(&intf->dev, "URB failed %d\n", urb->status);