// SPDX-License-Identifier: GPL-2.0-only/* * CAN driver for "8 devices" USB2CAN converter * * Copyright (C) 2012 Bernd Krumboeck (krumboeck@universalnet.at) * * This driver is inspired by the 3.2.0 version of drivers/net/can/usb/ems_usb.c * and drivers/net/can/usb/esd_usb2.c * * Many thanks to Gerhard Bertelsmann (info@gerhard-bertelsmann.de) * for testing and fixing this driver. Also many thanks to "8 devices", * who were very cooperative and answered my questions. */ #include <linux/ethtool.h>#include <linux/signal.h>#include <linux/slab.h>#include <linux/module.h>#include <linux/netdevice.h>#include <linux/usb.h> #include <linux/can.h>#include <linux/can/dev.h>#include <linux/can/error.h> /* driver constants */#define MAX_RX_URBS 20#define MAX_TX_URBS 20#define RX_BUFFER_SIZE 64 /* vendor and product id */#define USB_8DEV_VENDOR_ID 0x0483#define USB_8DEV_PRODUCT_ID 0x1234 /* endpoints */enum usb_8dev_endpoint { USB_8DEV_ENDP_DATA_RX = 1, USB_8DEV_ENDP_DATA_TX, USB_8DEV_ENDP_CMD_RX, USB_8DEV_ENDP_CMD_TX}; /* device CAN clock */#define USB_8DEV_ABP_CLOCK 32000000 /* setup flags */#define USB_8DEV_SILENT 0x01#define USB_8DEV_LOOPBACK 0x02#define USB_8DEV_DISABLE_AUTO_RESTRANS 0x04#define USB_8DEV_STATUS_FRAME 0x08 /* commands */enum usb_8dev_cmd { USB_8DEV_RESET = 1, USB_8DEV_OPEN, USB_8DEV_CLOSE, USB_8DEV_SET_SPEED, USB_8DEV_SET_MASK_FILTER, USB_8DEV_GET_STATUS, USB_8DEV_GET_STATISTICS, USB_8DEV_GET_SERIAL, USB_8DEV_GET_SOFTW_VER, USB_8DEV_GET_HARDW_VER, USB_8DEV_RESET_TIMESTAMP, USB_8DEV_GET_SOFTW_HARDW_VER}; /* command options */#define USB_8DEV_BAUD_MANUAL 0x09#define USB_8DEV_CMD_START 0x11#define USB_8DEV_CMD_END 0x22 #define USB_8DEV_CMD_SUCCESS 0#define USB_8DEV_CMD_ERROR 255 #define USB_8DEV_CMD_TIMEOUT 1000 /* frames */#define USB_8DEV_DATA_START 0x55#define USB_8DEV_DATA_END 0xAA #define USB_8DEV_TYPE_CAN_FRAME 0#define USB_8DEV_TYPE_ERROR_FRAME 3 #define USB_8DEV_EXTID 0x01#define USB_8DEV_RTR 0x02#define USB_8DEV_ERR_FLAG 0x04 /* status */#define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */#define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */#define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */#define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */#define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */#define USB_8DEV_STATUSMSG_STUFF 0x20 /* Stuff Error */#define USB_8DEV_STATUSMSG_FORM 0x21 /* Form Error */#define USB_8DEV_STATUSMSG_ACK 0x23 /* Ack Error */#define USB_8DEV_STATUSMSG_BIT0 0x24 /* Bit1 Error */#define USB_8DEV_STATUSMSG_BIT1 0x25 /* Bit0 Error */#define USB_8DEV_STATUSMSG_CRC 0x27 /* CRC Error */ #define USB_8DEV_RP_MASK 0x7F /* Mask for Receive Error Bit */ /* table of devices that work with this driver */static const struct usb_device_id usb_8dev_table[] = { { USB_DEVICE(USB_8DEV_VENDOR_ID, USB_8DEV_PRODUCT_ID) }, { } /* Terminating entry */}; MODULE_DEVICE_TABLE(usb, usb_8dev_table); struct usb_8dev_tx_urb_context { struct usb_8dev_priv *priv; u32 echo_index;}; /* Structure to hold all of our device specific stuff */struct usb_8dev_priv { struct can_priv can; /* must be the first member */ struct usb_device *udev; struct net_device *netdev; atomic_t active_tx_urbs; struct usb_anchor tx_submitted; struct usb_8dev_tx_urb_context tx_contexts[MAX_TX_URBS]; struct usb_anchor rx_submitted; struct can_berr_counter bec; u8 *cmd_msg_buffer; struct mutex usb_8dev_cmd_lock; void *rxbuf[MAX_RX_URBS]; dma_addr_t rxbuf_dma[MAX_RX_URBS];}; /* tx frame */struct __packed usb_8dev_tx_msg { u8 begin; u8 flags; /* RTR and EXT_ID flag */ __be32 id; /* upper 3 bits not used */ u8 dlc; /* data length code 0-8 bytes */ u8 data[8]; /* 64-bit data */ u8 end;}; /* rx frame */struct __packed usb_8dev_rx_msg { u8 begin; u8 type; /* frame type */ u8 flags; /* RTR and EXT_ID flag */ __be32 id; /* upper 3 bits not used */ u8 dlc; /* data length code 0-8 bytes */ u8 data[8]; /* 64-bit data */ __be32 timestamp; /* 32-bit timestamp */ u8 end;}; /* command frame */struct __packed usb_8dev_cmd_msg { u8 begin; u8 channel; /* unknown - always 0 */ u8 command; /* command to execute */ u8 opt1; /* optional parameter / return value */ u8 opt2; /* optional parameter 2 */ u8 data[10]; /* optional parameter and data */ u8 end;}; static int usb_8dev_send_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size){ int actual_length; return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_TX), msg, size, &actual_length, USB_8DEV_CMD_TIMEOUT);} static int usb_8dev_wait_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size, int *actual_length){ return usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_RX), msg, size, actual_length, USB_8DEV_CMD_TIMEOUT);} /* Send command to device and receive result. * Command was successful when opt1 = 0. */static int usb_8dev_send_cmd(struct usb_8dev_priv *priv, struct usb_8dev_cmd_msg *out, struct usb_8dev_cmd_msg *in){ int err; int num_bytes_read; struct net_device *netdev; netdev = priv->netdev; out->begin = USB_8DEV_CMD_START; out->end = USB_8DEV_CMD_END; mutex_lock(&priv->usb_8dev_cmd_lock); memcpy(priv->cmd_msg_buffer, out, sizeof(struct usb_8dev_cmd_msg)); err = usb_8dev_send_cmd_msg(priv, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); if (err < 0) { netdev_err(netdev, "sending command message failed\n"); goto failed; } err = usb_8dev_wait_cmd_msg(priv, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg), &num_bytes_read); if (err < 0) { netdev_err(netdev, "no command message answer\n"); goto failed; } memcpy(in, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); if (in->begin != USB_8DEV_CMD_START || in->end != USB_8DEV_CMD_END || num_bytes_read != 16 || in->opt1 != 0) err = -EPROTO; failed: mutex_unlock(&priv->usb_8dev_cmd_lock); return err;} /* Send open command to device */static int usb_8dev_cmd_open(struct usb_8dev_priv *priv){ struct can_bittiming *bt = &priv->can.bittiming; struct usb_8dev_cmd_msg outmsg; struct usb_8dev_cmd_msg inmsg; u32 ctrlmode = priv->can.ctrlmode; u32 flags = USB_8DEV_STATUS_FRAME; __be32 beflags; __be16 bebrp; memset(&outmsg, 0, sizeof(outmsg)); outmsg.command = USB_8DEV_OPEN; outmsg.opt1 = USB_8DEV_BAUD_MANUAL; outmsg.data[0] = bt->prop_seg + bt->phase_seg1; outmsg.data[1] = bt->phase_seg2; outmsg.data[2] = bt->sjw; /* BRP */ bebrp = cpu_to_be16((u16)bt->brp); memcpy(&outmsg.data[3], &bebrp, sizeof(bebrp)); /* flags */ if (ctrlmode & CAN_CTRLMODE_LOOPBACK) flags |= USB_8DEV_LOOPBACK; if (ctrlmode & CAN_CTRLMODE_LISTENONLY) flags |= USB_8DEV_SILENT; if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) flags |= USB_8DEV_DISABLE_AUTO_RESTRANS; beflags = cpu_to_be32(flags); memcpy(&outmsg.data[5], &beflags, sizeof(beflags)); return usb_8dev_send_cmd(priv, &outmsg, &inmsg);} /* Send close command to device */static int usb_8dev_cmd_close(struct usb_8dev_priv *priv){ struct usb_8dev_cmd_msg inmsg; struct usb_8dev_cmd_msg outmsg = { .channel = 0, .command = USB_8DEV_CLOSE, .opt1 = 0, .opt2 = 0 }; return usb_8dev_send_cmd(priv, &outmsg, &inmsg);} /* Get firmware and hardware version */static int usb_8dev_cmd_version(struct usb_8dev_priv *priv, u32 *res){ struct usb_8dev_cmd_msg inmsg; struct usb_8dev_cmd_msg outmsg = { .channel = 0, .command = USB_8DEV_GET_SOFTW_HARDW_VER, .opt1 = 0, .opt2 = 0 }; int err = usb_8dev_send_cmd(priv, &outmsg, &inmsg); if (err) return err; *res = be32_to_cpup((__be32 *)inmsg.data); return err;} /* Set network device mode * * Maybe we should leave this function empty, because the device * set mode variable with open command. */static int usb_8dev_set_mode(struct net_device *netdev, enum can_mode mode){ struct usb_8dev_priv *priv = netdev_priv(netdev); int err = 0; switch (mode) { case CAN_MODE_START: err = usb_8dev_cmd_open(priv); if (err) netdev_warn(netdev, "couldn't start device"); break; default: return -EOPNOTSUPP; } return err;} /* Read error/status frames */static void usb_8dev_rx_err_msg(struct usb_8dev_priv *priv, struct usb_8dev_rx_msg *msg){ struct can_frame *cf; struct sk_buff *skb; struct net_device_stats *stats = &priv->netdev->stats; /* Error message: * byte 0: Status * byte 1: bit 7: Receive Passive * byte 1: bit 0-6: Receive Error Counter * byte 2: Transmit Error Counter * byte 3: Always 0 (maybe reserved for future use) */ u8 state = msg->data[0]; u8 rxerr = msg->data[1] & USB_8DEV_RP_MASK; u8 txerr = msg->data[2]; int rx_errors = 0; int tx_errors = 0; skb = alloc_can_err_skb(priv->netdev, &cf); if (!skb) return; switch (state) { case USB_8DEV_STATUSMSG_OK: priv->can.state = CAN_STATE_ERROR_ACTIVE; cf->can_id |= CAN_ERR_PROT; cf->data[2] = CAN_ERR_PROT_ACTIVE; break; case USB_8DEV_STATUSMSG_BUSOFF: priv->can.state = CAN_STATE_BUS_OFF; cf->can_id |= CAN_ERR_BUSOFF; priv->can.can_stats.bus_off++; can_bus_off(priv->netdev); break; case USB_8DEV_STATUSMSG_OVERRUN: case USB_8DEV_STATUSMSG_BUSLIGHT: case USB_8DEV_STATUSMSG_BUSHEAVY: cf->can_id |= CAN_ERR_CRTL; break; default: priv->can.state = CAN_STATE_ERROR_WARNING; cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; priv->can.can_stats.bus_error++; break; } switch (state) { case USB_8DEV_STATUSMSG_OK: case USB_8DEV_STATUSMSG_BUSOFF: break; case USB_8DEV_STATUSMSG_ACK: cf->can_id |= CAN_ERR_ACK; tx_errors = 1; break; case USB_8DEV_STATUSMSG_CRC: cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; rx_errors = 1; break; case USB_8DEV_STATUSMSG_BIT0: cf->data[2] |= CAN_ERR_PROT_BIT0; tx_errors = 1; break; case USB_8DEV_STATUSMSG_BIT1: cf->data[2] |= CAN_ERR_PROT_BIT1; tx_errors = 1; break; case USB_8DEV_STATUSMSG_FORM: cf->data[2] |= CAN_ERR_PROT_FORM; rx_errors = 1; break; case USB_8DEV_STATUSMSG_STUFF: cf->data[2] |= CAN_ERR_PROT_STUFF; rx_errors = 1; break; case USB_8DEV_STATUSMSG_OVERRUN: cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; stats->rx_over_errors++; rx_errors = 1; break; case USB_8DEV_STATUSMSG_BUSLIGHT: priv->can.state = CAN_STATE_ERROR_WARNING; cf->data[1] = (txerr > rxerr) ? CAN_ERR_CRTL_TX_WARNING : CAN_ERR_CRTL_RX_WARNING; priv->can.can_stats.error_warning++; break; case USB_8DEV_STATUSMSG_BUSHEAVY: priv->can.state = CAN_STATE_ERROR_PASSIVE; cf->data[1] = (txerr > rxerr) ? CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE; priv->can.can_stats.error_passive++; break; default: netdev_warn(priv->netdev, "Unknown status/error message (%d)\n", state); break; } if (tx_errors) { cf->data[2] |= CAN_ERR_PROT_TX; stats->tx_errors++; } if (rx_errors) stats->rx_errors++; if (priv->can.state != CAN_STATE_BUS_OFF) { cf->can_id |= CAN_ERR_CNT; cf->data[6] = txerr; cf->data[7] = rxerr; } priv->bec.txerr = txerr; priv->bec.rxerr = rxerr; netif_rx(skb);} /* Read data and status frames */static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv, struct usb_8dev_rx_msg *msg){ struct can_frame *cf; struct sk_buff *skb; struct net_device_stats *stats = &priv->netdev->stats; if (msg->type == USB_8DEV_TYPE_ERROR_FRAME && msg->flags == USB_8DEV_ERR_FLAG) { usb_8dev_rx_err_msg(priv, msg); } else if (msg->type == USB_8DEV_TYPE_CAN_FRAME) { skb = alloc_can_skb(priv->netdev, &cf); if (!skb) return; cf->can_id = be32_to_cpu(msg->id); can_frame_set_cc_len(cf, msg->dlc & 0xF, priv->can.ctrlmode); if (msg->flags & USB_8DEV_EXTID) cf->can_id |= CAN_EFF_FLAG; if (msg->flags & USB_8DEV_RTR) { cf->can_id |= CAN_RTR_FLAG; } else { memcpy(cf->data, msg->data, cf->len); stats->rx_bytes += cf->len; } stats->rx_packets++; netif_rx(skb); } else { netdev_warn(priv->netdev, "frame type %d unknown", msg->type); } } /* Callback for reading data from device * * Check urb status, call read function and resubmit urb read operation. */static void usb_8dev_read_bulk_callback(struct urb *urb){ struct usb_8dev_priv *priv = urb->context; struct net_device *netdev; int retval;Lines 1–500 of 1021. Load more
// SPDX-License-Identifier: GPL-2.0-only /* * CAN driver for "8 devices" USB2CAN converter * * Copyright (C) 2012 Bernd Krumboeck (krumboeck@universalnet.at) * * This driver is inspired by the 3.2.0 version of drivers/net/can/usb/ems_usb.c * and drivers/net/can/usb/esd_usb2.c * * Many thanks to Gerhard Bertelsmann (info@gerhard-bertelsmann.de) * for testing and fixing this driver. Also many thanks to "8 devices", * who were very cooperative and answered my questions. */ #include <linux/ethtool.h> #include <linux/signal.h> #include <linux/slab.h> #include <linux/module.h> #include <linux/netdevice.h> #include <linux/usb.h> #include <linux/can.h> #include <linux/can/dev.h> #include <linux/can/error.h> /* driver constants */ #define MAX_RX_URBS 20 #define MAX_TX_URBS 20 #define RX_BUFFER_SIZE 64 /* vendor and product id */ #define USB_8DEV_VENDOR_ID 0x0483 #define USB_8DEV_PRODUCT_ID 0x1234 /* endpoints */ enum usb_8dev_endpoint { USB_8DEV_ENDP_DATA_RX = 1, USB_8DEV_ENDP_DATA_TX, USB_8DEV_ENDP_CMD_RX, USB_8DEV_ENDP_CMD_TX }; /* device CAN clock */ #define USB_8DEV_ABP_CLOCK 32000000 /* setup flags */ #define USB_8DEV_SILENT 0x01 #define USB_8DEV_LOOPBACK 0x02 #define USB_8DEV_DISABLE_AUTO_RESTRANS 0x04 #define USB_8DEV_STATUS_FRAME 0x08 /* commands */ enum usb_8dev_cmd { USB_8DEV_RESET = 1, USB_8DEV_OPEN, USB_8DEV_CLOSE, USB_8DEV_SET_SPEED, USB_8DEV_SET_MASK_FILTER, USB_8DEV_GET_STATUS, USB_8DEV_GET_STATISTICS, USB_8DEV_GET_SERIAL, USB_8DEV_GET_SOFTW_VER, USB_8DEV_GET_HARDW_VER, USB_8DEV_RESET_TIMESTAMP, USB_8DEV_GET_SOFTW_HARDW_VER }; /* command options */ #define USB_8DEV_BAUD_MANUAL 0x09 #define USB_8DEV_CMD_START 0x11 #define USB_8DEV_CMD_END 0x22 #define USB_8DEV_CMD_SUCCESS 0 #define USB_8DEV_CMD_ERROR 255 #define USB_8DEV_CMD_TIMEOUT 1000 /* frames */ #define USB_8DEV_DATA_START 0x55 #define USB_8DEV_DATA_END 0xAA #define USB_8DEV_TYPE_CAN_FRAME 0 #define USB_8DEV_TYPE_ERROR_FRAME 3 #define USB_8DEV_EXTID 0x01 #define USB_8DEV_RTR 0x02 #define USB_8DEV_ERR_FLAG 0x04 /* status */ #define USB_8DEV_STATUSMSG_OK 0x00 /* Normal condition. */ #define USB_8DEV_STATUSMSG_OVERRUN 0x01 /* Overrun occurred when sending */ #define USB_8DEV_STATUSMSG_BUSLIGHT 0x02 /* Error counter has reached 96 */ #define USB_8DEV_STATUSMSG_BUSHEAVY 0x03 /* Error count. has reached 128 */ #define USB_8DEV_STATUSMSG_BUSOFF 0x04 /* Device is in BUSOFF */ #define USB_8DEV_STATUSMSG_STUFF 0x20 /* Stuff Error */ #define USB_8DEV_STATUSMSG_FORM 0x21 /* Form Error */ #define USB_8DEV_STATUSMSG_ACK 0x23 /* Ack Error */ #define USB_8DEV_STATUSMSG_BIT0 0x24 /* Bit1 Error */ #define USB_8DEV_STATUSMSG_BIT1 0x25 /* Bit0 Error */ #define USB_8DEV_STATUSMSG_CRC 0x27 /* CRC Error */ #define USB_8DEV_RP_MASK 0x7F /* Mask for Receive Error Bit */ /* table of devices that work with this driver */ static const struct usb_device_id usb_8dev_table[] = { { USB_DEVICE(USB_8DEV_VENDOR_ID, USB_8DEV_PRODUCT_ID) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, usb_8dev_table); struct usb_8dev_tx_urb_context { struct usb_8dev_priv *priv; u32 echo_index; }; /* Structure to hold all of our device specific stuff */ struct usb_8dev_priv { struct can_priv can; /* must be the first member */ struct usb_device *udev; struct net_device *netdev; atomic_t active_tx_urbs; struct usb_anchor tx_submitted; struct usb_8dev_tx_urb_context tx_contexts[MAX_TX_URBS]; struct usb_anchor rx_submitted; struct can_berr_counter bec; u8 *cmd_msg_buffer; struct mutex usb_8dev_cmd_lock; void *rxbuf[MAX_RX_URBS]; dma_addr_t rxbuf_dma[MAX_RX_URBS]; }; /* tx frame */ struct __packed usb_8dev_tx_msg { u8 begin; u8 flags; /* RTR and EXT_ID flag */ __be32 id; /* upper 3 bits not used */ u8 dlc; /* data length code 0-8 bytes */ u8 data[8]; /* 64-bit data */ u8 end; }; /* rx frame */ struct __packed usb_8dev_rx_msg { u8 begin; u8 type; /* frame type */ u8 flags; /* RTR and EXT_ID flag */ __be32 id; /* upper 3 bits not used */ u8 dlc; /* data length code 0-8 bytes */ u8 data[8]; /* 64-bit data */ __be32 timestamp; /* 32-bit timestamp */ u8 end; }; /* command frame */ struct __packed usb_8dev_cmd_msg { u8 begin; u8 channel; /* unknown - always 0 */ u8 command; /* command to execute */ u8 opt1; /* optional parameter / return value */ u8 opt2; /* optional parameter 2 */ u8 data[10]; /* optional parameter and data */ u8 end; }; static int usb_8dev_send_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size) { int actual_length; return usb_bulk_msg(priv->udev, usb_sndbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_TX), msg, size, &actual_length, USB_8DEV_CMD_TIMEOUT); } static int usb_8dev_wait_cmd_msg(struct usb_8dev_priv *priv, u8 *msg, int size, int *actual_length) { return usb_bulk_msg(priv->udev, usb_rcvbulkpipe(priv->udev, USB_8DEV_ENDP_CMD_RX), msg, size, actual_length, USB_8DEV_CMD_TIMEOUT); } /* Send command to device and receive result. * Command was successful when opt1 = 0. */ static int usb_8dev_send_cmd(struct usb_8dev_priv *priv, struct usb_8dev_cmd_msg *out, struct usb_8dev_cmd_msg *in) { int err; int num_bytes_read; struct net_device *netdev; netdev = priv->netdev; out->begin = USB_8DEV_CMD_START; out->end = USB_8DEV_CMD_END; mutex_lock(&priv->usb_8dev_cmd_lock); memcpy(priv->cmd_msg_buffer, out, sizeof(struct usb_8dev_cmd_msg)); err = usb_8dev_send_cmd_msg(priv, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); if (err < 0) { netdev_err(netdev, "sending command message failed\n"); goto failed; } err = usb_8dev_wait_cmd_msg(priv, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg), &num_bytes_read); if (err < 0) { netdev_err(netdev, "no command message answer\n"); goto failed; } memcpy(in, priv->cmd_msg_buffer, sizeof(struct usb_8dev_cmd_msg)); if (in->begin != USB_8DEV_CMD_START || in->end != USB_8DEV_CMD_END || num_bytes_read != 16 || in->opt1 != 0) err = -EPROTO; failed: mutex_unlock(&priv->usb_8dev_cmd_lock); return err; } /* Send open command to device */ static int usb_8dev_cmd_open(struct usb_8dev_priv *priv) { struct can_bittiming *bt = &priv->can.bittiming; struct usb_8dev_cmd_msg outmsg; struct usb_8dev_cmd_msg inmsg; u32 ctrlmode = priv->can.ctrlmode; u32 flags = USB_8DEV_STATUS_FRAME; __be32 beflags; __be16 bebrp; memset(&outmsg, 0, sizeof(outmsg)); outmsg.command = USB_8DEV_OPEN; outmsg.opt1 = USB_8DEV_BAUD_MANUAL; outmsg.data[0] = bt->prop_seg + bt->phase_seg1; outmsg.data[1] = bt->phase_seg2; outmsg.data[2] = bt->sjw; /* BRP */ bebrp = cpu_to_be16((u16)bt->brp); memcpy(&outmsg.data[3], &bebrp, sizeof(bebrp)); /* flags */ if (ctrlmode & CAN_CTRLMODE_LOOPBACK) flags |= USB_8DEV_LOOPBACK; if (ctrlmode & CAN_CTRLMODE_LISTENONLY) flags |= USB_8DEV_SILENT; if (ctrlmode & CAN_CTRLMODE_ONE_SHOT) flags |= USB_8DEV_DISABLE_AUTO_RESTRANS; beflags = cpu_to_be32(flags); memcpy(&outmsg.data[5], &beflags, sizeof(beflags)); return usb_8dev_send_cmd(priv, &outmsg, &inmsg); } /* Send close command to device */ static int usb_8dev_cmd_close(struct usb_8dev_priv *priv) { struct usb_8dev_cmd_msg inmsg; struct usb_8dev_cmd_msg outmsg = { .channel = 0, .command = USB_8DEV_CLOSE, .opt1 = 0, .opt2 = 0 }; return usb_8dev_send_cmd(priv, &outmsg, &inmsg); } /* Get firmware and hardware version */ static int usb_8dev_cmd_version(struct usb_8dev_priv *priv, u32 *res) { struct usb_8dev_cmd_msg inmsg; struct usb_8dev_cmd_msg outmsg = { .channel = 0, .command = USB_8DEV_GET_SOFTW_HARDW_VER, .opt1 = 0, .opt2 = 0 }; int err = usb_8dev_send_cmd(priv, &outmsg, &inmsg); if (err) return err; *res = be32_to_cpup((__be32 *)inmsg.data); return err; } /* Set network device mode * * Maybe we should leave this function empty, because the device * set mode variable with open command. */ static int usb_8dev_set_mode(struct net_device *netdev, enum can_mode mode) { struct usb_8dev_priv *priv = netdev_priv(netdev); int err = 0; switch (mode) { case CAN_MODE_START: err = usb_8dev_cmd_open(priv); if (err) netdev_warn(netdev, "couldn't start device"); break; default: return -EOPNOTSUPP; } return err; } /* Read error/status frames */ static void usb_8dev_rx_err_msg(struct usb_8dev_priv *priv, struct usb_8dev_rx_msg *msg) { struct can_frame *cf; struct sk_buff *skb; struct net_device_stats *stats = &priv->netdev->stats; /* Error message: * byte 0: Status * byte 1: bit 7: Receive Passive * byte 1: bit 0-6: Receive Error Counter * byte 2: Transmit Error Counter * byte 3: Always 0 (maybe reserved for future use) */ u8 state = msg->data[0]; u8 rxerr = msg->data[1] & USB_8DEV_RP_MASK; u8 txerr = msg->data[2]; int rx_errors = 0; int tx_errors = 0; skb = alloc_can_err_skb(priv->netdev, &cf); if (!skb) return; switch (state) { case USB_8DEV_STATUSMSG_OK: priv->can.state = CAN_STATE_ERROR_ACTIVE; cf->can_id |= CAN_ERR_PROT; cf->data[2] = CAN_ERR_PROT_ACTIVE; break; case USB_8DEV_STATUSMSG_BUSOFF: priv->can.state = CAN_STATE_BUS_OFF; cf->can_id |= CAN_ERR_BUSOFF; priv->can.can_stats.bus_off++; can_bus_off(priv->netdev); break; case USB_8DEV_STATUSMSG_OVERRUN: case USB_8DEV_STATUSMSG_BUSLIGHT: case USB_8DEV_STATUSMSG_BUSHEAVY: cf->can_id |= CAN_ERR_CRTL; break; default: priv->can.state = CAN_STATE_ERROR_WARNING; cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; priv->can.can_stats.bus_error++; break; } switch (state) { case USB_8DEV_STATUSMSG_OK: case USB_8DEV_STATUSMSG_BUSOFF: break; case USB_8DEV_STATUSMSG_ACK: cf->can_id |= CAN_ERR_ACK; tx_errors = 1; break; case USB_8DEV_STATUSMSG_CRC: cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ; rx_errors = 1; break; case USB_8DEV_STATUSMSG_BIT0: cf->data[2] |= CAN_ERR_PROT_BIT0; tx_errors = 1; break; case USB_8DEV_STATUSMSG_BIT1: cf->data[2] |= CAN_ERR_PROT_BIT1; tx_errors = 1; break; case USB_8DEV_STATUSMSG_FORM: cf->data[2] |= CAN_ERR_PROT_FORM; rx_errors = 1; break; case USB_8DEV_STATUSMSG_STUFF: cf->data[2] |= CAN_ERR_PROT_STUFF; rx_errors = 1; break; case USB_8DEV_STATUSMSG_OVERRUN: cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; stats->rx_over_errors++; rx_errors = 1; break; case USB_8DEV_STATUSMSG_BUSLIGHT: priv->can.state = CAN_STATE_ERROR_WARNING; cf->data[1] = (txerr > rxerr) ? CAN_ERR_CRTL_TX_WARNING : CAN_ERR_CRTL_RX_WARNING; priv->can.can_stats.error_warning++; break; case USB_8DEV_STATUSMSG_BUSHEAVY: priv->can.state = CAN_STATE_ERROR_PASSIVE; cf->data[1] = (txerr > rxerr) ? CAN_ERR_CRTL_TX_PASSIVE : CAN_ERR_CRTL_RX_PASSIVE; priv->can.can_stats.error_passive++; break; default: netdev_warn(priv->netdev, "Unknown status/error message (%d)\n", state); break; } if (tx_errors) { cf->data[2] |= CAN_ERR_PROT_TX; stats->tx_errors++; } if (rx_errors) stats->rx_errors++; if (priv->can.state != CAN_STATE_BUS_OFF) { cf->can_id |= CAN_ERR_CNT; cf->data[6] = txerr; cf->data[7] = rxerr; } priv->bec.txerr = txerr; priv->bec.rxerr = rxerr; netif_rx(skb); } /* Read data and status frames */ static void usb_8dev_rx_can_msg(struct usb_8dev_priv *priv, struct usb_8dev_rx_msg *msg) { struct can_frame *cf; struct sk_buff *skb; struct net_device_stats *stats = &priv->netdev->stats; if (msg->type == USB_8DEV_TYPE_ERROR_FRAME && msg->flags == USB_8DEV_ERR_FLAG) { usb_8dev_rx_err_msg(priv, msg); } else if (msg->type == USB_8DEV_TYPE_CAN_FRAME) { skb = alloc_can_skb(priv->netdev, &cf); if (!skb) return; cf->can_id = be32_to_cpu(msg->id); can_frame_set_cc_len(cf, msg->dlc & 0xF, priv->can.ctrlmode); if (msg->flags & USB_8DEV_EXTID) cf->can_id |= CAN_EFF_FLAG; if (msg->flags & USB_8DEV_RTR) { cf->can_id |= CAN_RTR_FLAG; } else { memcpy(cf->data, msg->data, cf->len); stats->rx_bytes += cf->len; } stats->rx_packets++; netif_rx(skb); } else { netdev_warn(priv->netdev, "frame type %d unknown", msg->type); } } /* Callback for reading data from device * * Check urb status, call read function and resubmit urb read operation. */ static void usb_8dev_read_bulk_callback(struct urb *urb) { struct usb_8dev_priv *priv = urb->context; struct net_device *netdev; int retval;