267 lines · 8.9 KB · Text
RawDownload
# SPDX-License-Identifier: GPL-2.0-only## PTP clock support configuration# menu "PTP clock support" config PTP_1588_CLOCK	tristate "PTP clock support"	depends on NET && POSIX_TIMERS	default ETHERNET	select PPS	select NET_PTP_CLASSIFY	help	  The IEEE 1588 standard defines a method to precisely	  synchronize distributed clocks over Ethernet networks. The	  standard defines a Precision Time Protocol (PTP), which can	  be used to achieve synchronization within a few dozen	  microseconds. In addition, with the help of special hardware	  time stamping units, it can be possible to achieve	  synchronization to within a few hundred nanoseconds. 	  This driver adds support for PTP clocks as character	  devices. If you want to use a PTP clock, then you should	  also enable at least one clock driver as well. 	  To compile this driver as a module, choose M here: the module	  will be called ptp. config PTP_1588_CLOCK_OPTIONAL	tristate	default y if PTP_1588_CLOCK=n	default PTP_1588_CLOCK	help	  Drivers that can optionally use the PTP_1588_CLOCK framework	  should depend on this symbol to prevent them from being built	  into vmlinux while the PTP support itself is in a loadable	  module.	  If PTP support is disabled, this dependency will still be	  met, and drivers refer to dummy helpers. config PTP_1588_CLOCK_DTE	tristate "Broadcom DTE as PTP clock"	depends on PTP_1588_CLOCK	depends on NET && HAS_IOMEM	depends on ARCH_BCM_MOBILE || (ARCH_BCM_IPROC && !(ARCH_BCM_NSP || ARCH_BCM_5301X)) || COMPILE_TEST	default y if ARCH_BCM_MOBILE || ARCH_BCM_IPROC	help	  This driver adds support for using the Digital timing engine	  (DTE) in the Broadcom SoC's as a PTP clock. 	  The clock can be used in both wired and wireless networks	  for PTP purposes. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_dte. config PTP_1588_CLOCK_QORIQ	tristate "Freescale QorIQ 1588 timer as PTP clock"	depends on GIANFAR || FSL_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF || COMPILE_TEST	depends on PTP_1588_CLOCK	default y if GIANFAR || FSL_DPAA_ETH || FSL_DPAA2_ETH || FSL_ENETC || FSL_ENETC_VF	help	  This driver adds support for using the Freescale QorIQ 1588	  timer as a PTP clock. This clock is only useful if your PTP	  programs are getting hardware time stamps on the PTP Ethernet	  packets using the SO_TIMESTAMPING API. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_qoriq. comment "Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks."	depends on PHYLIB=n || NETWORK_PHY_TIMESTAMPING=n config DP83640_PHY	tristate "Driver for the National Semiconductor DP83640 PHYTER"	depends on NETWORK_PHY_TIMESTAMPING	depends on PHYLIB	depends on PTP_1588_CLOCK	select CRC32	select PHY_PACKAGE	help	  Supports the DP83640 PHYTER with IEEE 1588 features. 	  This driver adds support for using the DP83640 as a PTP	  clock. This clock is only useful if your PTP programs are	  getting hardware time stamps on the PTP Ethernet packets	  using the SO_TIMESTAMPING API. 	  In order for this to work, your MAC driver must also	  implement the skb_tx_timestamp() function. config PTP_1588_CLOCK_INES	tristate "ZHAW InES PTP time stamping IP core"	depends on NETWORK_PHY_TIMESTAMPING	depends on HAS_IOMEM	depends on PHYLIB	depends on PTP_1588_CLOCK	help	  This driver adds support for using the ZHAW InES 1588 IP	  core.  This clock is only useful if the MII bus of your MAC	  is wired up to the core. config PTP_1588_CLOCK_PCH	tristate "Intel PCH EG20T as PTP clock"	depends on MIPS_GENERIC || X86_32 || COMPILE_TEST	depends on HAS_IOMEM && PCI	depends on NET	depends on PTP_1588_CLOCK	help	  This driver adds support for using the PCH EG20T as a PTP	  clock. The hardware supports time stamping of PTP packets	  when using the end-to-end delay (E2E) mechanism. The peer	  delay mechanism (P2P) is not supported. 	  This clock is only useful if your PTP programs are getting	  hardware time stamps on the PTP Ethernet packets using the	  SO_TIMESTAMPING API. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_pch. config PTP_1588_CLOCK_KVM	tristate "KVM virtual PTP clock"	depends on PTP_1588_CLOCK	depends on (KVM_GUEST && X86) || (HAVE_ARM_SMCCC_DISCOVERY && ARM_ARCH_TIMER)	default y	help	  This driver adds support for using kvm infrastructure as a PTP	  clock. This clock is only useful if you are using KVM guests. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_kvm. config PTP_1588_CLOCK_VMCLOCK	tristate "Virtual machine PTP clock"	depends on X86_TSC || ARM_ARCH_TIMER	depends on PTP_1588_CLOCK && ARCH_SUPPORTS_INT128	default PTP_1588_CLOCK_KVM	help	  This driver adds support for using a virtual precision clock	  advertised by the hypervisor. This clock is only useful in virtual	  machines where such a device is present. 	  Unlike the KVM virtual PTP clock, the VMCLOCK device offers support	  for reliable timekeeping even across live migration. So this driver	  is enabled by default whenever the KVM PTP clock is. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_vmclock. config PTP_1588_CLOCK_IDT82P33	tristate "IDT 82P33xxx PTP clock"	depends on PTP_1588_CLOCK && I2C	default n	help	  This driver adds support for using the IDT 82P33xxx as a PTP	  clock. This clock is only useful if your time stamping MAC	  is connected to the IDT chip. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_idt82p33. config PTP_1588_CLOCK_IDTCM	tristate "IDT CLOCKMATRIX as PTP clock"	depends on PTP_1588_CLOCK && I2C	default n	help	  This driver adds support for using IDT CLOCKMATRIX(TM) as a PTP	  clock. This clock is only useful if your time stamping MAC	  is connected to the IDT chip. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_clockmatrix. config PTP_1588_CLOCK_FC3W	tristate "RENESAS FemtoClock3 Wireless as PTP clock"	depends on PTP_1588_CLOCK && I2C	default n	help	  This driver adds support for using Renesas FemtoClock3 Wireless	  as a PTP clock. This clock is only useful if your time stamping	  MAC is connected to the RENESAS chip. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_fc3. config PTP_1588_CLOCK_MOCK	tristate "Mock-up PTP clock"	depends on PTP_1588_CLOCK	help	  This driver offers a set of PTP clock manipulation operations over	  the system monotonic time. It can be used by virtual network device	  drivers to emulate PTP capabilities. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_mock. config PTP_1588_CLOCK_VMW	tristate "VMware virtual PTP clock"	depends on ACPI && HYPERVISOR_GUEST && X86	depends on PTP_1588_CLOCK	help	  This driver adds support for using VMware virtual precision	  clock device as a PTP clock. This is only useful in virtual	  machines running on VMware virtual infrastructure. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_vmw. config PTP_1588_CLOCK_OCP	tristate "OpenCompute TimeCard as PTP clock"	depends on PTP_1588_CLOCK	depends on HAS_IOMEM && PCI	depends on I2C && MTD	depends on SERIAL_8250	depends on !S390	depends on COMMON_CLK	select NET_DEVLINK	select CRC16	select DPLL	help	  This driver adds support for an OpenCompute time card. 	  The OpenCompute time card is an atomic clock along with	  a GPS receiver that provides a Grandmaster clock source	  for a PTP enabled network. 	  More information is available at http://www.timingcard.com/ config PTP_DFL_TOD	tristate "FPGA DFL ToD Driver"	depends on FPGA_DFL	depends on PTP_1588_CLOCK	help	  The DFL (Device Feature List) device driver for the Intel ToD	  (Time-of-Day) device in FPGA card. The ToD IP within the FPGA	  is exposed as PTP Hardware Clock (PHC) device to the Linux PTP	  stack to synchronize the system clock to its ToD information	  using phc2sys utility of the Linux PTP stack. 	  To compile this driver as a module, choose M here: the module	  will be called ptp_dfl_tod. config PTP_S390	tristate "S390 PTP driver"	depends on PTP_1588_CLOCK	depends on S390	help	  This driver adds support for S390 time steering via the PtP	  interface. This works by adding a in-kernel clock delta value,	  which is always added to time values used in the kernel. The PtP	  driver provides the raw clock value without the delta to	  userspace. That way userspace programs like chrony could steer	  the kernel clock. config PTP_NETC_V4_TIMER	tristate "NXP NETC V4 Timer PTP Driver"	depends on PTP_1588_CLOCK	depends on PCI_MSI	help	  This driver adds support for using the NXP NETC V4 Timer as a PTP	  clock, the clock is used by ENETC V4 or NETC V4 Switch for PTP time	  synchronization. It also supports periodic output signal (e.g. PPS)	  and external trigger timestamping. endmenu

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t