201 lines · 5.0 KB · C
RawDownload
/* * Sonics Silicon Backplane * Broadcom EXTIF core driver * * Copyright 2005, Broadcom Corporation * Copyright 2006, 2007, Michael Buesch <m@bues.ch> * Copyright 2006, 2007, Felix Fietkau <nbd@openwrt.org> * Copyright 2007, Aurelien Jarno <aurelien@aurel32.net> * * Licensed under the GNU/GPL. See COPYING for details. */ #include "ssb_private.h" #include <linux/serial.h>#include <linux/serial_core.h>#include <linux/serial_reg.h>  static inline u32 extif_read32(struct ssb_extif *extif, u16 offset){	return ssb_read32(extif->dev, offset);} static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value){	ssb_write32(extif->dev, offset, value);} static inline u32 extif_write32_masked(struct ssb_extif *extif, u16 offset,				       u32 mask, u32 value){	value &= mask;	value |= extif_read32(extif, offset) & ~mask;	extif_write32(extif, offset, value); 	return value;} #ifdef CONFIG_SSB_SERIALstatic bool serial_exists(u8 *regs){	u8 save_mcr, msr = 0; 	if (regs) {		save_mcr = regs[UART_MCR];		regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);		msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI					| UART_MSR_CTS | UART_MSR_DSR);		regs[UART_MCR] = save_mcr;	}	return (msr == (UART_MSR_DCD | UART_MSR_CTS));} int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports){	u32 i, nr_ports = 0; 	/* Disable GPIO interrupt initially */	extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);	extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0); 	for (i = 0; i < 2; i++) {		void __iomem *uart_regs; 		uart_regs = ioremap(SSB_EUART, 16);		if (uart_regs) {			uart_regs += (i * 8); 			if (serial_exists(uart_regs) && ports) {				extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2); 				nr_ports++;				ports[i].regs = uart_regs;				ports[i].irq = 2;				ports[i].baud_base = 13500000;				ports[i].reg_shift = 0;			}			iounmap(uart_regs);		}	}	return nr_ports;}#endif /* CONFIG_SSB_SERIAL */ void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns){	u32 tmp; 	/* Initialize extif so we can get to the LEDs and external UART */	extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN); 	/* Set timing for the flash */	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;	tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;	tmp |= DIV_ROUND_UP(120, ns);	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp); 	/* Set programmable interface timing for external uart */	tmp  = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;	tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;	tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;	tmp |= DIV_ROUND_UP(120, ns);	extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);} void ssb_extif_get_clockcontrol(struct ssb_extif *extif,				u32 *pll_type, u32 *n, u32 *m){	*pll_type = SSB_PLLTYPE_1;	*n = extif_read32(extif, SSB_EXTIF_CLOCK_N);	*m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);} u32 ssb_extif_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt, u32 ticks){	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt); 	return ssb_extif_watchdog_timer_set(extif, ticks);} u32 ssb_extif_watchdog_timer_set_ms(struct bcm47xx_wdt *wdt, u32 ms){	struct ssb_extif *extif = bcm47xx_wdt_get_drvdata(wdt);	u32 ticks = (SSB_EXTIF_WATCHDOG_CLK / 1000) * ms; 	ticks = ssb_extif_watchdog_timer_set(extif, ticks); 	return (ticks * 1000) / SSB_EXTIF_WATCHDOG_CLK;} u32 ssb_extif_watchdog_timer_set(struct ssb_extif *extif, u32 ticks){	if (ticks > SSB_EXTIF_WATCHDOG_MAX_TIMER)		ticks = SSB_EXTIF_WATCHDOG_MAX_TIMER;	extif_write32(extif, SSB_EXTIF_WATCHDOG, ticks); 	return ticks;} void ssb_extif_init(struct ssb_extif *extif){	if (!extif->dev)		return; /* We don't have a Extif core */	spin_lock_init(&extif->gpio_lock);} u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask){	return extif_read32(extif, SSB_EXTIF_GPIO_IN) & mask;} u32 ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value){	unsigned long flags;	u32 res = 0; 	spin_lock_irqsave(&extif->gpio_lock, flags);	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUT(0),				   mask, value);	spin_unlock_irqrestore(&extif->gpio_lock, flags); 	return res;} u32 ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value){	unsigned long flags;	u32 res = 0; 	spin_lock_irqsave(&extif->gpio_lock, flags);	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_OUTEN(0),				   mask, value);	spin_unlock_irqrestore(&extif->gpio_lock, flags); 	return res;} u32 ssb_extif_gpio_polarity(struct ssb_extif *extif, u32 mask, u32 value){	unsigned long flags;	u32 res = 0; 	spin_lock_irqsave(&extif->gpio_lock, flags);	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTPOL, mask, value);	spin_unlock_irqrestore(&extif->gpio_lock, flags); 	return res;} u32 ssb_extif_gpio_intmask(struct ssb_extif *extif, u32 mask, u32 value){	unsigned long flags;	u32 res = 0; 	spin_lock_irqsave(&extif->gpio_lock, flags);	res = extif_write32_masked(extif, SSB_EXTIF_GPIO_INTMASK, mask, value);	spin_unlock_irqrestore(&extif->gpio_lock, flags); 	return res;}

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t