416 lines · 13.8 KB · C
RawDownload
/* SPDX-License-Identifier: GPL-2.0-only *//* * Copyright (c) 2008-2009 Cisco Systems, Inc.  All rights reserved. * Copyright (c) 2007-2008 Intel Corporation.  All rights reserved. * * Maintained at www.Open-FCoE.org */ #ifndef _LIBFCOE_H#define _LIBFCOE_H #include <linux/etherdevice.h>#include <linux/if_ether.h>#include <linux/netdevice.h>#include <linux/skbuff.h>#include <linux/workqueue.h>#include <linux/local_lock.h>#include <linux/prandom.h>#include <scsi/fc/fc_fcoe.h>#include <scsi/libfc.h>#include <scsi/fcoe_sysfs.h> #define FCOE_MAX_CMD_LEN	16	/* Supported CDB length */ /* * Max MTU for FCoE: 14 (FCoE header) + 24 (FC header) + 2112 (max FC payload) * + 4 (FC CRC) + 4 (FCoE trailer) =  2158 bytes */#define FCOE_MTU	2158 /* * FIP tunable parameters. */#define FCOE_CTLR_START_DELAY	2000	/* mS after first adv. to choose FCF */#define FCOE_CTLR_SOL_TOV	2000	/* min. solicitation interval (mS) */#define FCOE_CTLR_FCF_LIMIT	20	/* max. number of FCF entries */#define FCOE_CTLR_VN2VN_LOGIN_LIMIT 3	/* max. VN2VN rport login retries */ /** * enum fip_state - internal state of FCoE controller. * @FIP_ST_DISABLED: 	controller has been disabled or not yet enabled. * @FIP_ST_LINK_WAIT:	the physical link is down or unusable. * @FIP_ST_AUTO:	determining whether to use FIP or non-FIP mode. * @FIP_ST_NON_FIP:	non-FIP mode selected. * @FIP_ST_ENABLED:	FIP mode selected. * @FIP_ST_VNMP_START:	VN2VN multipath mode start, wait * @FIP_ST_VNMP_PROBE1:	VN2VN sent first probe, listening * @FIP_ST_VNMP_PROBE2:	VN2VN sent second probe, listening * @FIP_ST_VNMP_CLAIM:	VN2VN sent claim, waiting for responses * @FIP_ST_VNMP_UP:	VN2VN multipath mode operation */enum fip_state {	FIP_ST_DISABLED,	FIP_ST_LINK_WAIT,	FIP_ST_AUTO,	FIP_ST_NON_FIP,	FIP_ST_ENABLED,	FIP_ST_VNMP_START,	FIP_ST_VNMP_PROBE1,	FIP_ST_VNMP_PROBE2,	FIP_ST_VNMP_CLAIM,	FIP_ST_VNMP_UP,}; /* * Modes: * The mode is the state that is to be entered after link up. * It must not change after fcoe_ctlr_init() sets it. */enum fip_mode {	FIP_MODE_AUTO,	FIP_MODE_NON_FIP,	FIP_MODE_FABRIC,	FIP_MODE_VN2VN,}; /** * struct fcoe_ctlr - FCoE Controller and FIP state * @state:	   internal FIP state for network link and FIP or non-FIP mode. * @mode:	   LLD-selected mode. * @lp:		   &fc_lport: libfc local port. * @sel_fcf:	   currently selected FCF, or NULL. * @fcfs:	   list of discovered FCFs. * @cdev:          (Optional) pointer to sysfs fcoe_ctlr_device. * @fcf_count:	   number of discovered FCF entries. * @sol_time:	   time when a multicast solicitation was last sent. * @sel_time:	   time after which to select an FCF. * @port_ka_time:  time of next port keep-alive. * @ctlr_ka_time:  time of next controller keep-alive. * @timer:	   timer struct used for all delayed events. * @timer_work:	   &work_struct for doing keep-alives and resets. * @recv_work:	   &work_struct for receiving FIP frames. * @fip_recv_list: list of received FIP frames. * @flogi_req:	   clone of FLOGI request sent * @rnd_state:	   state for pseudo-random number generator. * @port_id:	   proposed or selected local-port ID. * @user_mfs:	   configured maximum FC frame size, including FC header. * @flogi_oxid:    exchange ID of most recent fabric login. * @flogi_req_send: send of FLOGI requested * @flogi_count:   number of FLOGI attempts in AUTO mode. * @map_dest:	   use the FC_MAP mode for destination MAC addresses. * @fip_resp:	   start FIP VLAN discovery responder * @spma:	   supports SPMA server-provided MACs mode * @probe_tries:   number of FC_IDs probed * @priority:      DCBx FCoE APP priority * @dest_addr:	   MAC address of the selected FC forwarder. * @ctl_src_addr:  the native MAC address of our local port. * @send:	   LLD-supplied function to handle sending FIP Ethernet frames * @update_mac:    LLD-supplied function to handle changes to MAC addresses. * @get_src_addr:  LLD-supplied function to supply a source MAC address. * @ctlr_mutex:	   lock protecting this structure. * @ctlr_lock:     spinlock covering flogi_req * * This structure is used by all FCoE drivers.  It contains information * needed by all FCoE low-level drivers (LLDs) as well as internal state * for FIP, and fields shared with the LLDS. */struct fcoe_ctlr {	enum fip_state state;	enum fip_mode mode;	struct fc_lport *lp;	struct fcoe_fcf *sel_fcf;	struct list_head fcfs;	struct fcoe_ctlr_device *cdev;	u16 fcf_count;	unsigned long sol_time;	unsigned long sel_time;	unsigned long port_ka_time;	unsigned long ctlr_ka_time;	struct timer_list timer;	struct work_struct timer_work;	struct work_struct recv_work;	struct sk_buff_head fip_recv_list;	struct sk_buff *flogi_req; 	struct rnd_state rnd_state;	u32 port_id; 	u16 user_mfs;	u16 flogi_oxid;	u8 flogi_req_send;	u8 flogi_count;	bool map_dest;	bool fip_resp;	u8 spma;	u8 probe_tries;	u8 priority;	u8 dest_addr[ETH_ALEN];	u8 ctl_src_addr[ETH_ALEN]; 	void (*send)(struct fcoe_ctlr *, struct sk_buff *);	void (*update_mac)(struct fc_lport *, u8 *addr);	u8 * (*get_src_addr)(struct fc_lport *);	struct mutex ctlr_mutex;	spinlock_t ctlr_lock;}; /** * fcoe_ctlr_priv() - Return the private data from a fcoe_ctlr * @ctlr: The fcoe_ctlr whose private data will be returned * * Returns: pointer to the private data */static inline void *fcoe_ctlr_priv(const struct fcoe_ctlr *ctlr){	return (void *)(ctlr + 1);} /* * This assumes that the fcoe_ctlr (x) is allocated with the fcoe_ctlr_device. */#define fcoe_ctlr_to_ctlr_dev(x)					\	(x)->cdev /** * struct fcoe_fcf - Fibre-Channel Forwarder * @list:	 list linkage * @event_work:  Work for FC Transport actions queue * @fip:         The controller that the FCF was discovered on * @fcf_dev:     The associated fcoe_fcf_device instance * @time:	 system time (jiffies) when an advertisement was last received * @switch_name: WWN of switch from advertisement * @fabric_name: WWN of fabric from advertisement * @fc_map:	 FC_MAP value from advertisement * @fcf_mac:	 Ethernet address of the FCF for FIP traffic * @fcoe_mac:	 Ethernet address of the FCF for FCoE traffic * @vfid:	 virtual fabric ID * @pri:	 selection priority, smaller values are better * @flogi_sent:	 current FLOGI sent to this FCF * @flags:	 flags received from advertisement * @fka_period:	 keep-alive period, in jiffies * @fd_flags:	 no need for FKA from ENode * * A Fibre-Channel Forwarder (FCF) is the entity on the Ethernet that * passes FCoE frames on to an FC fabric.  This structure represents * one FCF from which advertisements have been received. * * When looking up an FCF, @switch_name, @fabric_name, @fc_map, @vfid, and * @fcf_mac together form the lookup key. */struct fcoe_fcf {	struct list_head list;	struct work_struct event_work;	struct fcoe_ctlr *fip;	struct fcoe_fcf_device *fcf_dev;	unsigned long time; 	u64 switch_name;	u64 fabric_name;	u32 fc_map;	u16 vfid;	u8 fcf_mac[ETH_ALEN];	u8 fcoe_mac[ETH_ALEN]; 	u8 pri;	u8 flogi_sent;	u16 flags;	u32 fka_period;	u8 fd_flags:1;}; #define fcoe_fcf_to_fcf_dev(x)			\	((x)->fcf_dev) /** * struct fcoe_rport - VN2VN remote port * @rdata:	libfc remote port private data * @time:	time of create or last beacon packet received from node * @fcoe_len:	max FCoE frame size, not including VLAN or Ethernet headers * @flags:	flags from probe or claim * @login_count: number of unsuccessful rport logins to this port * @enode_mac:	E_Node control MAC address * @vn_mac:	VN_Node assigned MAC address for data */struct fcoe_rport {	struct fc_rport_priv rdata;	unsigned long time;	u16 fcoe_len;	u16 flags;	u8 login_count;	u8 enode_mac[ETH_ALEN];	u8 vn_mac[ETH_ALEN];}; /* FIP API functions */void fcoe_ctlr_init(struct fcoe_ctlr *, enum fip_mode);void fcoe_ctlr_destroy(struct fcoe_ctlr *);void fcoe_ctlr_link_up(struct fcoe_ctlr *);int fcoe_ctlr_link_down(struct fcoe_ctlr *);int fcoe_ctlr_els_send(struct fcoe_ctlr *, struct fc_lport *, struct sk_buff *);void fcoe_ctlr_recv(struct fcoe_ctlr *, struct sk_buff *);int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *,			 struct fc_frame *); /* libfcoe funcs */u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme,		      unsigned int port);int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *,		      const struct libfc_function_template *, int init_fcp);u32 fcoe_fc_crc(struct fc_frame *fp);int fcoe_start_io(struct sk_buff *skb);int fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);void __fcoe_get_lesb(struct fc_lport *lport, struct fc_els_lesb *fc_lesb,		     struct net_device *netdev);void fcoe_wwn_to_str(u64 wwn, char *buf, int len);int fcoe_validate_vport_create(struct fc_vport *vport);int fcoe_link_speed_update(struct fc_lport *);void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);void fcoe_ctlr_get_lesb(struct fcoe_ctlr_device *ctlr_dev); /** * is_fip_mode() - test if FIP mode selected. * @fip:	FCoE controller. * * Returns: %true if FIP mode is selected */static inline bool is_fip_mode(struct fcoe_ctlr *fip){	return fip->state == FIP_ST_ENABLED;} /* helper for FCoE SW HBA drivers, can include subven and subdev if needed. The * modpost would use pci_device_id table to auto-generate formatted module alias * into the corresponding .mod.c file, but there may or may not be a pci device * id table for FCoE drivers so we use the following helper for build the fcoe * driver module alias. */#define MODULE_ALIAS_FCOE_PCI(ven, dev) \	MODULE_ALIAS("fcoe-pci:"	\		"v" __stringify(ven)	\		"d" __stringify(dev) "sv*sd*bc*sc*i*") /* the name of the default FCoE transport driver fcoe.ko */#define FCOE_TRANSPORT_DEFAULT	"fcoe" /* struct fcoe_transport - The FCoE transport interface * @name:	a vendor specific name for their FCoE transport driver * @attached:	whether this transport is already attached * @list:	list linkage to all attached transports * @match:	handler to allow the transport driver to match up a given netdev * @alloc:      handler to allocate per-instance FCoE structures *		(no discovery or login) * @create:	handler to sysfs entry of create for FCoE instances * @destroy:    handler to delete per-instance FCoE structures *		(frees all memory) * @enable:	handler to sysfs entry of enable for FCoE instances * @disable:	handler to sysfs entry of disable for FCoE instances */struct fcoe_transport {	char name[IFNAMSIZ];	bool attached;	struct list_head list;	bool (*match) (struct net_device *device);	int (*alloc) (struct net_device *device);	int (*create) (struct net_device *device, enum fip_mode fip_mode);	int (*destroy) (struct net_device *device);	int (*enable) (struct net_device *device);	int (*disable) (struct net_device *device);}; /** * struct fcoe_percpu_s - The context for FCoE receive thread(s) * @kthread:	    The thread context (used by bnx2fc) * @work:	    The work item (used by fcoe) * @fcoe_rx_list:   The queue of pending packets to process * @crc_eof_page:   The memory page for calculating frame trailer CRCs * @crc_eof_offset: The offset into the CRC page pointing to available *		    memory for a new trailer * @lock:	    local lock for members of this struct */struct fcoe_percpu_s {	struct task_struct *kthread;	struct work_struct work;	struct sk_buff_head fcoe_rx_list;	struct page *crc_eof_page;	int crc_eof_offset;	local_lock_t lock;}; /** * struct fcoe_port - The FCoE private structure * @priv:		       The associated fcoe interface. The structure is *			       defined by the low level driver * @lport:		       The associated local port * @fcoe_pending_queue:	       The pending Rx queue of skbs * @fcoe_pending_queue_active: Indicates if the pending queue is active * @max_queue_depth:	       Max queue depth of pending queue * @min_queue_depth:	       Min queue depth of pending queue * @timer:		       The queue timer * @destroy_work:	       Handle for work context *			       (to prevent RTNL deadlocks) * @data_src_addr:	       Source address for data * @get_netdev:                function that returns a &net_device from @lport * * An instance of this structure is to be allocated along with the * Scsi_Host and libfc fc_lport structures. */struct fcoe_port {	void		      *priv;	struct fc_lport	      *lport;	struct sk_buff_head   fcoe_pending_queue;	u8		      fcoe_pending_queue_active;	u32		      max_queue_depth;	u32		      min_queue_depth;	struct timer_list     timer;	struct work_struct    destroy_work;	u8		      data_src_addr[ETH_ALEN];	struct net_device * (*get_netdev)(const struct fc_lport *lport);}; /** * fcoe_get_netdev() - Return the net device associated with a local port * @lport: The local port to get the net device from * * Returns: the &net_device associated with this @lport */static inline struct net_device *fcoe_get_netdev(const struct fc_lport *lport){	struct fcoe_port *port = ((struct fcoe_port *)lport_priv(lport)); 	return (port->get_netdev) ? port->get_netdev(lport) : NULL;} void fcoe_clean_pending_queue(struct fc_lport *);void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb);void fcoe_queue_timer(struct timer_list *t);int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,			   struct fcoe_percpu_s *fps); /* FCoE Sysfs helpers */void fcoe_fcf_get_selected(struct fcoe_fcf_device *);void fcoe_ctlr_set_fip_mode(struct fcoe_ctlr_device *); /** * struct fcoe_netdev_mapping - A mapping from &net_device to &fcoe_transport * @list: list linkage of the mappings * @netdev: the &net_device * @ft: the fcoe_transport associated with @netdev */struct fcoe_netdev_mapping {	struct list_head list;	struct net_device *netdev;	struct fcoe_transport *ft;}; /* fcoe transports registration and deregistration */int fcoe_transport_attach(struct fcoe_transport *ft);int fcoe_transport_detach(struct fcoe_transport *ft); /* sysfs store handler for ctrl_control interface */ssize_t fcoe_ctlr_create_store(const char *buf, size_t count);ssize_t fcoe_ctlr_destroy_store(const char *buf, size_t count); #endif /* _LIBFCOE_H */