# SPDX-License-Identifier: GPL-2.0-onlyfeature_dir := $(srctree)/tools/build/feature ifneq ($(OUTPUT),) OUTPUT_FEATURES = $(OUTPUT)feature/ $(shell mkdir -p $(OUTPUT_FEATURES))endif feature_check = $(eval $(feature_check_code))define feature_check_code feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CC="$(CC)" CXX="$(CXX)" CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)endef feature_set = $(eval $(feature_set_code))define feature_set_code feature-$(1) := 1endef ## Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:# ## Note that this is not a complete list of all feature tests, just# those that are typically built on a fully configured system.## [ Feature tests not mentioned here have to be built explicitly in# the rule that uses them - an example for that is the 'bionic'# feature check. ]## These + the ones in FEATURE_TESTS_EXTRA are included in# tools/build/feature/test-all.c and we try to build it all together# then setting all those features to '1' meaning they are all enabled.## There are things like fortify-source that will be set to 1 because test-all# is built with the flags needed to test if its enabled, resulting in## $ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump# $ grep fortify-source /tmp/b/FEATURE-DUMP# feature-fortify-source=1# $## All the others should have lines in tools/build/feature/test-all.c like:## #define main main_test_disassembler_init_styled# # include "test-disassembler-init-styled.c"# #undef main## #define main main_test_libzstd# # include "test-libzstd.c"# #undef main## int main(int argc, char *argv[])# {# main_test_disassembler_four_args();# main_test_libzstd();# return 0;# }## If the sample above works, then we end up with these lines in the FEATURE-DUMP# file:## feature-disassembler-four-args=1# feature-libzstd=1#FEATURE_TESTS_BASIC := \ backtrace \ libdw \ eventfd \ fortify-source \ gettid \ glibc \ libbfd \ libbfd-threadsafe \ libelf \ libelf-getphdrnum \ libelf-gelf_getnote \ libelf-getshdrstrndx \ libelf-zstd \ libnuma \ numa_num_possible_cpus \ libpython \ libslang \ libtraceevent \ libcpupower \ pthread-attr-setaffinity-np \ pthread-barrier \ reallocarray \ stackprotector-all \ timerfd \ zlib \ lzma \ bpf \ scandirat \ sched_getcpu \ sdt \ setns \ libaio \ libzstd \ disassembler-four-args \ disassembler-init-styled \ file-handle \ libopenssl # FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list# of all feature tests LIBUNWIND_ARCHS:=aarch64 arm loongarch64 mips ppc32 ppc64 riscv s390x x86 x86_64 FEATURE_TESTS_EXTRA := \ bionic \ compile-32 \ compile-x32 \ cplus-demangle \ cxa-demangle \ gtk2 \ gtk2-infobar \ hello \ babeltrace2-ctf-writer \ libcapstone \ libcheck \ libbfd-liberty \ libbfd-liberty-z \ libopencsd \ libperl \ llvm \ libbpf \ libpfm4 \ libdebuginfod \ clang-bpf-co-re \ bpftool-skeletons \ libunwind \ libunwind-debug-frame \ $(foreach arch,$(LIBUNWIND_ARCHS),libunwind-$(arch) libunwind-debug-frame-$(arch)) FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC) ifeq ($(FEATURE_TESTS),all) FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)endif FEATURE_DISPLAY ?= \ libdw \ glibc \ libelf \ libnuma \ numa_num_possible_cpus \ libpython \ libcapstone \ llvm-perf \ zlib \ lzma \ bpf \ libaio \ libzstd \ libopenssl \ rust ## Declare group members of a feature to display the logical OR of the detection# result instead of each member result.#FEATURE_GROUP_MEMBERS-libbfd = libbfd-liberty libbfd-liberty-z ## Declare list of feature dependency packages that provide pkg-config files.#FEATURE_PKG_CONFIG ?= \ babeltrace2-ctf-writer \ libtraceevent \ libtracefs feature_pkg_config = $(eval $(feature_pkg_config_code))define feature_pkg_config_code FEATURE_CHECK_CFLAGS-$(1) := $(shell $(PKG_CONFIG) --cflags $(1) 2>/dev/null) FEATURE_CHECK_LDFLAGS-$(1) := $(shell $(PKG_CONFIG) --libs $(1) 2>/dev/null)endef # Set FEATURE_CHECK_(C|LD)FLAGS-$(package) for packages using pkg-config.ifneq ($(PKG_CONFIG),) $(foreach package,$(FEATURE_PKG_CONFIG),$(call feature_pkg_config,$(package)))endif FEATURE_CHECK_LDFLAGS-libcheck = -lcheck # Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.# If in the future we need per-feature checks/flags for features not# mentioned in this list we need to refactor this ;-).set_test_all_flags = $(eval $(set_test_all_flags_code))define set_test_all_flags_code FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1)) FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))endef $(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat))) ## Special fast-path for the 'all features are available' case:#$(call feature_check,all,$(MSG)) ## Just in case the build freshly failed, make sure we print the# feature matrix:#ifeq ($(feature-all), 1) # # test-all.c passed - just set all the core feature flags to 1: # $(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat))) # # test-all.c does not comprise these tests, so we need to # for this case to get features proper values # $(call feature_check,compile-32) $(call feature_check,compile-x32) $(call feature_check,bionic) $(call feature_check,babeltrace2-ctf-writer) $(call feature_check,libunwind) $(call feature_check,libunwind-debug-frame) $(foreach arch,$(LIBUNWIND_ARCHS),$(call feature_check,libunwind-$(arch))) $(foreach arch,$(LIBUNWIND_ARCHS),$(call feature_check,libunwind-debug-frame-$(arch)))else $(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))endif ## Print the result of the feature test:#feature_print_status = $(eval $(feature_print_status_code)) feature_group = $(eval $(feature_gen_group)) $(GROUP) define feature_gen_group GROUP := $(1) ifneq ($(feature_verbose),1) GROUP += $(FEATURE_GROUP_MEMBERS-$(1)) endifendef define feature_print_status_code ifneq (,$(filter 1,$(foreach feat,$(call feature_group,$(feat)),$(feature-$(feat))))) MSG = $(shell printf '...%40s: [ \033[32mon\033[m ]' $(1)) else MSG = $(shell printf '...%40s: [ \033[31mOFF\033[m ]' $(1)) endifendef feature_print_text = $(eval $(feature_print_text_code))define feature_print_text_code MSG = $(shell printf '...%40s: %s' $(1) $(2))endef ## generates feature value assignment for name, like:# $(call feature_assign,libdw) == feature-libdw=1#feature_assign = feature-$(1)=$(feature-$(1)) FEATURE_DUMP_FILENAME = $(OUTPUT)FEATURE-DUMP$(FEATURE_USER)FEATURE_DUMP := $(shell touch $(FEATURE_DUMP_FILENAME); cat $(FEATURE_DUMP_FILENAME)) feature_dump_check = $(eval $(feature_dump_check_code))define feature_dump_check_code ifeq ($(findstring $(1),$(FEATURE_DUMP)),) $(2) := 1 endifendef ## First check if any test from FEATURE_DISPLAY# and set feature_display := 1 if it does$(foreach feat,$(FEATURE_DISPLAY),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_display)) ## Now also check if any other test changed,# so we force FEATURE-DUMP generation$(foreach feat,$(FEATURE_TESTS),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_dump_changed)) # The $(feature_display) controls the default detection message# output. It's set if:# - detected features differes from stored features from# last build (in $(FEATURE_DUMP_FILENAME) file)# - one of the $(FEATURE_DISPLAY) is not detected# - VF is enabled ifeq ($(feature_dump_changed),1) $(shell rm -f $(FEATURE_DUMP_FILENAME)) $(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))endif feature_display_check = $(eval $(feature_check_display_code))define feature_check_display_code ifneq ($(feature-$(1)), 1) feature_display := 1 endifendef $(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat))) ifeq ($(VF),1) feature_display := 1 feature_verbose := 1endif ifneq ($(feature_verbose),1) # # Determine the features to omit from the displayed message, as only the # logical OR of the detection result will be shown. # FEATURE_OMIT := $(foreach feat,$(FEATURE_DISPLAY),$(FEATURE_GROUP_MEMBERS-$(feat)))endif feature_display_entries = $(eval $(feature_display_entries_code))define feature_display_entries_code ifeq ($(feature_display),1) $$(info ) $$(info Auto-detecting system features:) $(foreach feat,$(filter-out $(FEATURE_OMIT),$(FEATURE_DISPLAY)),$(call feature_print_status,$(feat),) $$(info $(MSG))) endif ifeq ($(feature_verbose),1) $(eval TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))) $(foreach feat,$(TMP),$(call feature_print_status,$(feat),) $$(info $(MSG))) endifendef ifeq ($(FEATURE_DISPLAY_DEFERRED),) $(call feature_display_entries) ifeq ($(feature_display),1) $(info ) endifendif
# SPDX-License-Identifier: GPL-2.0-only
feature_dir := $(srctree)/tools/build/feature
ifneq ($(OUTPUT),)
OUTPUT_FEATURES = $(OUTPUT)feature/
$(shell mkdir -p $(OUTPUT_FEATURES))
endif
feature_check = $(eval $(feature_check_code))
define feature_check_code
feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CC="$(CC)" CXX="$(CXX)" CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" CXXFLAGS="$(EXTRA_CXXFLAGS) $(FEATURE_CHECK_CXXFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) $(OUTPUT_FEATURES)test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
endef
feature_set = $(eval $(feature_set_code))
define feature_set_code
feature-$(1) := 1
endef
#
# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
#
#
# Note that this is not a complete list of all feature tests, just
# those that are typically built on a fully configured system.
#
# [ Feature tests not mentioned here have to be built explicitly in
# the rule that uses them - an example for that is the 'bionic'
# feature check. ]
#
# These + the ones in FEATURE_TESTS_EXTRA are included in
# tools/build/feature/test-all.c and we try to build it all together
# then setting all those features to '1' meaning they are all enabled.
#
# There are things like fortify-source that will be set to 1 because test-all
# is built with the flags needed to test if its enabled, resulting in
#
# $ rm -rf /tmp/b ; mkdir /tmp/b ; make -C tools/perf O=/tmp/b feature-dump
# $ grep fortify-source /tmp/b/FEATURE-DUMP
# feature-fortify-source=1
# $
#
# All the others should have lines in tools/build/feature/test-all.c like:
#
# #define main main_test_disassembler_init_styled
# # include "test-disassembler-init-styled.c"
# #undef main
#
# #define main main_test_libzstd
# # include "test-libzstd.c"
# #undef main
#
# int main(int argc, char *argv[])
# {
# main_test_disassembler_four_args();
# main_test_libzstd();
# return 0;
# }
#
# If the sample above works, then we end up with these lines in the FEATURE-DUMP
# file:
#
# feature-disassembler-four-args=1
# feature-libzstd=1
#
FEATURE_TESTS_BASIC := \
backtrace \
libdw \
eventfd \
fortify-source \
gettid \
glibc \
libbfd \
libbfd-threadsafe \
libelf \
libelf-getphdrnum \
libelf-gelf_getnote \
libelf-getshdrstrndx \
libelf-zstd \
libnuma \
numa_num_possible_cpus \
libpython \
libslang \
libtraceevent \
libcpupower \
pthread-attr-setaffinity-np \
pthread-barrier \
reallocarray \
stackprotector-all \
timerfd \
zlib \
lzma \
bpf \
scandirat \
sched_getcpu \
sdt \
setns \
libaio \
libzstd \
disassembler-four-args \
disassembler-init-styled \
file-handle \
libopenssl
# FEATURE_TESTS_BASIC + FEATURE_TESTS_EXTRA is the complete list
# of all feature tests
LIBUNWIND_ARCHS:=aarch64 arm loongarch64 mips ppc32 ppc64 riscv s390x x86 x86_64
FEATURE_TESTS_EXTRA := \
bionic \
compile-32 \
compile-x32 \
cplus-demangle \
cxa-demangle \
gtk2 \
gtk2-infobar \
hello \
babeltrace2-ctf-writer \
libcapstone \
libcheck \
libbfd-liberty \
libbfd-liberty-z \
libopencsd \
libperl \
llvm \
libbpf \
libpfm4 \
libdebuginfod \
clang-bpf-co-re \
bpftool-skeletons \
libunwind \
libunwind-debug-frame \
$(foreach arch,$(LIBUNWIND_ARCHS),libunwind-$(arch) libunwind-debug-frame-$(arch))
FEATURE_TESTS ?= $(FEATURE_TESTS_BASIC)
ifeq ($(FEATURE_TESTS),all)
FEATURE_TESTS := $(FEATURE_TESTS_BASIC) $(FEATURE_TESTS_EXTRA)
endif
FEATURE_DISPLAY ?= \
libdw \
glibc \
libelf \
libnuma \
numa_num_possible_cpus \
libpython \
libcapstone \
llvm-perf \
zlib \
lzma \
bpf \
libaio \
libzstd \
libopenssl \
rust
#
# Declare group members of a feature to display the logical OR of the detection
# result instead of each member result.
#
FEATURE_GROUP_MEMBERS-libbfd = libbfd-liberty libbfd-liberty-z
#
# Declare list of feature dependency packages that provide pkg-config files.
#
FEATURE_PKG_CONFIG ?= \
babeltrace2-ctf-writer \
libtraceevent \
libtracefs
feature_pkg_config = $(eval $(feature_pkg_config_code))
define feature_pkg_config_code
FEATURE_CHECK_CFLAGS-$(1) := $(shell $(PKG_CONFIG) --cflags $(1) 2>/dev/null)
FEATURE_CHECK_LDFLAGS-$(1) := $(shell $(PKG_CONFIG) --libs $(1) 2>/dev/null)
endef
# Set FEATURE_CHECK_(C|LD)FLAGS-$(package) for packages using pkg-config.
ifneq ($(PKG_CONFIG),)
$(foreach package,$(FEATURE_PKG_CONFIG),$(call feature_pkg_config,$(package)))
endif
FEATURE_CHECK_LDFLAGS-libcheck = -lcheck
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
# mentioned in this list we need to refactor this ;-).
set_test_all_flags = $(eval $(set_test_all_flags_code))
define set_test_all_flags_code
FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1))
FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
endef
$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
#
# Special fast-path for the 'all features are available' case:
#
$(call feature_check,all,$(MSG))
#
# Just in case the build freshly failed, make sure we print the
# feature matrix:
#
ifeq ($(feature-all), 1)
#
# test-all.c passed - just set all the core feature flags to 1:
#
$(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
#
# test-all.c does not comprise these tests, so we need to
# for this case to get features proper values
#
$(call feature_check,compile-32)
$(call feature_check,compile-x32)
$(call feature_check,bionic)
$(call feature_check,babeltrace2-ctf-writer)
$(call feature_check,libunwind)
$(call feature_check,libunwind-debug-frame)
$(foreach arch,$(LIBUNWIND_ARCHS),$(call feature_check,libunwind-$(arch)))
$(foreach arch,$(LIBUNWIND_ARCHS),$(call feature_check,libunwind-debug-frame-$(arch)))
else
$(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
endif
#
# Print the result of the feature test:
#
feature_print_status = $(eval $(feature_print_status_code))
feature_group = $(eval $(feature_gen_group)) $(GROUP)
define feature_gen_group
GROUP := $(1)
ifneq ($(feature_verbose),1)
GROUP += $(FEATURE_GROUP_MEMBERS-$(1))
endif
endef
define feature_print_status_code
ifneq (,$(filter 1,$(foreach feat,$(call feature_group,$(feat)),$(feature-$(feat)))))
MSG = $(shell printf '...%40s: [ \033[32mon\033[m ]' $(1))
else
MSG = $(shell printf '...%40s: [ \033[31mOFF\033[m ]' $(1))
endif
endef
feature_print_text = $(eval $(feature_print_text_code))
define feature_print_text_code
MSG = $(shell printf '...%40s: %s' $(1) $(2))
endef
#
# generates feature value assignment for name, like:
# $(call feature_assign,libdw) == feature-libdw=1
#
feature_assign = feature-$(1)=$(feature-$(1))
FEATURE_DUMP_FILENAME = $(OUTPUT)FEATURE-DUMP$(FEATURE_USER)
FEATURE_DUMP := $(shell touch $(FEATURE_DUMP_FILENAME); cat $(FEATURE_DUMP_FILENAME))
feature_dump_check = $(eval $(feature_dump_check_code))
define feature_dump_check_code
ifeq ($(findstring $(1),$(FEATURE_DUMP)),)
$(2) := 1
endif
endef
#
# First check if any test from FEATURE_DISPLAY
# and set feature_display := 1 if it does
$(foreach feat,$(FEATURE_DISPLAY),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_display))
#
# Now also check if any other test changed,
# so we force FEATURE-DUMP generation
$(foreach feat,$(FEATURE_TESTS),$(call feature_dump_check,$(call feature_assign,$(feat)),feature_dump_changed))
# The $(feature_display) controls the default detection message
# output. It's set if:
# - detected features differes from stored features from
# last build (in $(FEATURE_DUMP_FILENAME) file)
# - one of the $(FEATURE_DISPLAY) is not detected
# - VF is enabled
ifeq ($(feature_dump_changed),1)
$(shell rm -f $(FEATURE_DUMP_FILENAME))
$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
endif
feature_display_check = $(eval $(feature_check_display_code))
define feature_check_display_code
ifneq ($(feature-$(1)), 1)
feature_display := 1
endif
endef
$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))
ifeq ($(VF),1)
feature_display := 1
feature_verbose := 1
endif
ifneq ($(feature_verbose),1)
#
# Determine the features to omit from the displayed message, as only the
# logical OR of the detection result will be shown.
#
FEATURE_OMIT := $(foreach feat,$(FEATURE_DISPLAY),$(FEATURE_GROUP_MEMBERS-$(feat)))
endif
feature_display_entries = $(eval $(feature_display_entries_code))
define feature_display_entries_code
ifeq ($(feature_display),1)
$$(info )
$$(info Auto-detecting system features:)
$(foreach feat,$(filter-out $(FEATURE_OMIT),$(FEATURE_DISPLAY)),$(call feature_print_status,$(feat),) $$(info $(MSG)))
endif
ifeq ($(feature_verbose),1)
$(eval TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS)))
$(foreach feat,$(TMP),$(call feature_print_status,$(feat),) $$(info $(MSG)))
endif
endef
ifeq ($(FEATURE_DISPLAY_DEFERRED),)
$(call feature_display_entries)
ifeq ($(feature_display),1)
$(info )
endif
endif