# SPDX-License-Identifier: GPL-2.0# Makefile for net selftests CFLAGS += -Wall -Wl,--no-as-needed -O2 -gCFLAGS += -I../../../../usr/include/ $(KHDR_INCLUDES)# Additional include paths needed by kselftest.hCFLAGS += -I../ TEST_PROGS := \	altnames.sh \	amt.sh \	arp_ndisc_evict_nocarrier.sh \	arp_ndisc_untracked_subnets.sh \	bareudp.sh \	big_tcp.sh \	big_tcp_tunnels.sh \	bind_bhash.sh \	bpf_offload.py \	bridge_stp_mode.sh \	bridge_vlan_dump.sh \	broadcast_ether_dst.sh \	broadcast_pmtu.sh \	busy_poll_test.sh \	cmsg_ip.sh \	cmsg_so_mark.sh \	cmsg_so_priority.sh \	cmsg_time.sh \	cork_fragsize.py \	double_udp_encap.sh \	drop_monitor_tests.sh \	ecmp_rehash.sh \	exception_cache.sh \	fcnal-ipv4.sh \	fcnal-ipv6.sh \	fcnal-other.sh \	fdb_flush.sh \	fdb_notify.sh \	fib-onlink-tests.sh \	fib_nexthop_multiprefix.sh \	fib_nexthop_nongw.sh \	fib_nexthops.sh \	fib_rule_tests.sh \	fib_tests.sh \	fin_ack_lat.sh \	fou_mcast_encap.sh \	fq_band_pktlimit.sh \	gre_gso.sh \	gre_ipv6_lladdr.sh \	icmp.sh \	icmp_redirect.sh \	io_uring_zerocopy_tx.sh \	ioam6.sh \	ip6_gre_headroom.sh \	ip6_tunnel.sh \	ip_defrag.sh \	ip_local_port_range.sh \	ipv6_flowlabel.sh \	ipv6_force_forwarding.sh \	ipv6_route_update_soft_lockup.sh \	ipvtap_test.sh \	l2_tos_ttl_inherit.sh \	l2tp.sh \	link_netns.py \	lwt_dst_cache_ref_loop.sh \	macvlan_mcast_shared_mac.sh \	msg_zerocopy.sh \	nat6to4.sh \	ndisc_unsolicited_na_test.sh \	netdev-l2addr.sh \	netdevice.sh \	netns-name.sh \	netns-sysctl.sh \	nk_qlease.py \	nl_netdev.py \	nl_nlctrl.py \	pmtu.sh \	protodown.sh \	psock_snd.sh \	reuseaddr_ports_exhausted.sh \	reuseport_addr_any.sh \	route_hint.sh \	route_localnet.sh \	rps_default_mask.sh \	rtnetlink.py \	rtnetlink.sh \	rtnetlink_notification.sh \	run_afpackettests \	run_netsocktests \	rxtimestamp.sh \	sctp_vrf.sh \	skf_net_off.sh \	srv6_encap_lookup_l3vpn_test.sh \	srv6_end_dt46_l3vpn_test.sh \	srv6_end_dt4_l3vpn_test.sh \	srv6_end_dt6_l3vpn_test.sh \	srv6_end_dx4_netfilter_test.sh \	srv6_end_dx6_netfilter_test.sh \	srv6_end_flavors_test.sh \	srv6_end_next_csid_l3vpn_test.sh \	srv6_end_x_next_csid_l3vpn_test.sh \	srv6_hencap_red_l3vpn_test.sh \	srv6_hl2encap_red_l2vpn_test.sh \	srv6_iptunnel_cache.sh \	stress_reuseport_listen.sh \	tcp_ecmp_failover.sh \	tcp_fastopen_backup_key.sh \	test_bpf.sh \	test_bridge_backup_port.sh \	test_bridge_neigh_suppress.sh \	test_ingress_egress_chaining.sh \	test_neigh.sh \	test_so_rcv.sh \	test_vxlan_fdb_changelink.sh \	test_vxlan_mdb.sh \	test_vxlan_nh.sh \	test_vxlan_nolocalbypass.sh \	test_vxlan_under_vrf.sh \	test_vxlan_vnifilter_notify.sh \	test_vxlan_vnifiltering.sh \	tfo_passive.sh \	traceroute.sh \	txtimestamp.sh \	udpgro.sh \	udpgro_bench.sh \	udpgro_frglist.sh \	udpgro_fwd.sh \	udpgso.sh \	udpgso_bench.sh \	unicast_extensions.sh \	veth.sh \	vlan_bridge_binding.sh \	vlan_hw_filter.sh \	vrf-xfrm-tests.sh \	vrf_route_leaking.sh \	vrf_strict_mode_test.sh \	xfrm_policy.sh \	xfrm_state.sh \# end of TEST_PROGS TEST_PROGS_EXTENDED := \	xfrm_policy_add_speed.sh \# end of TEST_PROGS_EXTENDED TEST_GEN_FILES := \	bind_bhash \	cmsg_sender \	fin_ack_lat \	hwtstamp_config \	io_uring_zerocopy_tx \	ioam6_parser \	ip_defrag \	ip_local_port_range \	ipsec \	ipv6_flowlabel \	msg_zerocopy \	nettest \	psock_fanout \	psock_snd \	psock_tpacket \	reuseaddr_ports_exhausted \	reuseport_addr_any \	rxtimestamp \	sctp_hello \	skf_net_off \	so_netns_cookie \	so_rcv_listener \	socket \	stress_reuseport_listen \	tcp_fastopen_backup_key \	tcp_inq \	tcp_mmap \	tfo \	timestamping \	txring_overwrite \	txtimestamp \	udpgso \	udpgso_bench_rx \	udpgso_bench_tx \# end of TEST_GEN_FILES TEST_GEN_PROGS := \	bind_timewait \	bind_wildcard \	epoll_busy_poll \	getsockopt_iter \	icmp_rfc4884 \	ipv6_flowlabel_mgr \	ipv6_fragmentation \	proc_net_pktgen \	reuseaddr_conflict \	reuseport_bpf \	reuseport_bpf_cpu \	reuseport_bpf_numa \	reuseport_dualstack \	sk_bind_sendto_listen \	sk_connect_zero_addr \	sk_so_peek_off \	so_incoming_cpu \	tap \	tcp_port_share \	tls \# end of TEST_GEN_PROGS TEST_FILES := \	fcnal-test.sh \	in_netns.sh \	lib.sh \	settings \# end of TEST_FILES # YNL files, must be before "include ..lib.mk"YNL_GEN_FILES := busy_pollerYNL_GEN_PROGS := \	netlink-dumps \	tun \# end of YNL_GEN_PROGS TEST_GEN_FILES += $(YNL_GEN_FILES)TEST_GEN_PROGS += $(YNL_GEN_PROGS) TEST_GEN_FILES += $(patsubst %.c,%.o,$(wildcard *.bpf.c)) TEST_INCLUDES := forwarding/lib.sh include ../lib.mk # YNL buildYNL_GENS := \	netdev \	rt-addr \	rt-link \	rt-neigh \	rt-route \# end of YNL_GENS include ynl.mk $(OUTPUT)/epoll_busy_poll: LDLIBS += -lcap$(OUTPUT)/reuseport_bpf_numa: LDLIBS += -lnuma$(OUTPUT)/tcp_mmap: LDLIBS += -lpthread -lcrypto$(OUTPUT)/tcp_inq: LDLIBS += -lpthread$(OUTPUT)/bind_bhash: LDLIBS += -lpthread$(OUTPUT)/io_uring_zerocopy_tx: CFLAGS += -I../../../include/ include bpf.mk