// SPDX-License-Identifier: GPL-2.0/* * message.c - synchronous message handling * * Released under the GPLv2 only. */ #include <linux/acpi.h>#include <linux/pci.h> /* for scatterlist macros */#include <linux/usb.h>#include <linux/module.h>#include <linux/of.h>#include <linux/slab.h>#include <linux/mm.h>#include <linux/timer.h>#include <linux/ctype.h>#include <linux/nls.h>#include <linux/device.h>#include <linux/scatterlist.h>#include <linux/usb/cdc.h>#include <linux/usb/quirks.h>#include <linux/usb/hcd.h> /* for usbcore internals */#include <linux/usb/of.h>#include <asm/byteorder.h> #include "usb.h" static void cancel_async_set_config(struct usb_device *udev); struct api_context { struct completion done; int status;}; static void usb_api_blocking_completion(struct urb *urb){ struct api_context *ctx = urb->context; ctx->status = urb->status; complete(&ctx->done);} /* * Starts urb and waits for completion or timeout. * Whether or not the wait is killable depends on the flag passed in. * For example, compare usb_bulk_msg() and usb_bulk_msg_killable(). * * For non-killable waits, we enforce a maximum limit on the timeout value. */static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length, bool killable){ struct api_context ctx; unsigned long expire; int retval; long rc; init_completion(&ctx.done); urb->context = &ctx; urb->actual_length = 0; retval = usb_submit_urb(urb, GFP_NOIO); if (unlikely(retval)) goto out; if (!killable && (timeout <= 0 || timeout > USB_MAX_SYNCHRONOUS_TIMEOUT)) timeout = USB_MAX_SYNCHRONOUS_TIMEOUT; expire = (timeout > 0) ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; if (killable) rc = wait_for_completion_killable_timeout(&ctx.done, expire); else rc = wait_for_completion_timeout(&ctx.done, expire); if (rc <= 0) { usb_kill_urb(urb); if (ctx.status != -ENOENT) retval = ctx.status; else if (rc == 0) retval = -ETIMEDOUT; else retval = rc; dev_dbg(&urb->dev->dev, "%s timed out or killed on ep%d%s len=%u/%u\n", current->comm, usb_endpoint_num(&urb->ep->desc), usb_urb_dir_in(urb) ? "in" : "out", urb->actual_length, urb->transfer_buffer_length); } else retval = ctx.status;out: if (actual_length) *actual_length = urb->actual_length; usb_free_urb(urb); return retval;} /*-------------------------------------------------------------------*//* returns status (negative) or length (positive) */static int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe, struct usb_ctrlrequest *cmd, void *data, int len, int timeout){ struct urb *urb; int retv; int length; urb = usb_alloc_urb(0, GFP_NOIO); if (!urb) return -ENOMEM; usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data, len, usb_api_blocking_completion, NULL); retv = usb_start_wait_urb(urb, timeout, &length, false); if (retv < 0) return retv; else return length;} /** * usb_control_msg - Builds a control urb, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @data: pointer to the data to send * @size: length in bytes of the data to send * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple control message to a specified endpoint and * waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Return: If successful, the number of bytes transferred. Otherwise, a negative * error number. */int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *data, __u16 size, int timeout){ struct usb_ctrlrequest *dr; int ret; dr = kmalloc_obj(struct usb_ctrlrequest, GFP_NOIO); if (!dr) return -ENOMEM; dr->bRequestType = requesttype; dr->bRequest = request; dr->wValue = cpu_to_le16(value); dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(size); ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); /* Linger a bit, prior to the next control message. */ if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) msleep(200); kfree(dr); return ret;}EXPORT_SYMBOL_GPL(usb_control_msg); /** * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @endpoint: endpoint to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @driver_data: pointer to the data to send * @size: length in bytes of the data to send * @timeout: time in msecs to wait for the message to complete before timing out * @memflags: the flags for memory allocation for buffers * * Context: !in_interrupt () * * This function sends a control message to a specified endpoint that is not * expected to fill in a response (i.e. a "send message") and waits for the * message to complete, or timeout. * * Do not use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * The data pointer can be made to a reference on the stack, or anywhere else, * as it will not be modified at all. This does not have the restriction that * usb_control_msg() has where the data pointer must be to dynamically allocated * memory (i.e. memory that can be successfully DMAed to a device). * * Return: If successful, 0 is returned, Otherwise, a negative error number. */int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, __u8 requesttype, __u16 value, __u16 index, const void *driver_data, __u16 size, int timeout, gfp_t memflags){ unsigned int pipe = usb_sndctrlpipe(dev, endpoint); int ret; u8 *data = NULL; if (size) { data = kmemdup(driver_data, size, memflags); if (!data) return -ENOMEM; } ret = usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout); kfree(data); if (ret < 0) return ret; return 0;}EXPORT_SYMBOL_GPL(usb_control_msg_send); /** * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @endpoint: endpoint to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @driver_data: pointer to the data to be filled in by the message * @size: length in bytes of the data to be received * @timeout: time in msecs to wait for the message to complete before timing out * @memflags: the flags for memory allocation for buffers * * Context: !in_interrupt () * * This function sends a control message to a specified endpoint that is * expected to fill in a response (i.e. a "receive message") and waits for the * message to complete, or timeout. * * Do not use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * The data pointer can be made to a reference on the stack, or anywhere else * that can be successfully written to. This function does not have the * restriction that usb_control_msg() has where the data pointer must be to * dynamically allocated memory (i.e. memory that can be successfully DMAed to a * device). * * The "whole" message must be properly received from the device in order for * this function to be successful. If a device returns less than the expected * amount of data, then the function will fail. Do not use this for messages * where a variable amount of data might be returned. * * Return: If successful, 0 is returned, Otherwise, a negative error number. */int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *driver_data, __u16 size, int timeout, gfp_t memflags){ unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); int ret; u8 *data; if (!size || !driver_data) return -EINVAL; data = kmalloc(size, memflags); if (!data) return -ENOMEM; ret = usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout); if (ret < 0) goto exit; if (ret == size) { memcpy(driver_data, data, size); ret = 0; } else { ret = -EREMOTEIO; } exit: kfree(data); return ret;}EXPORT_SYMBOL_GPL(usb_control_msg_recv); /** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple interrupt message to a specified endpoint and * waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb() If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. */int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout){ return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout);}EXPORT_SYMBOL_GPL(usb_interrupt_msg); /** * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple bulk message to a specified endpoint * and waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb() If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl, * users are forced to abuse this routine by using it to submit URBs for * interrupt endpoints. We will take the liberty of creating an interrupt URB * (with the default interval) if the target is an interrupt endpoint. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. * */int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout){ struct urb *urb; struct usb_host_endpoint *ep; ep = usb_pipe_endpoint(usb_dev, pipe); if (!ep || len < 0) return -EINVAL; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); usb_fill_int_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL, ep->desc.bInterval); } else usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length, false);}EXPORT_SYMBOL_GPL(usb_bulk_msg); /** * usb_bulk_msg_killable - Builds a bulk urb, sends it off and waits for completion in a killable state * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before * timing out (if <= 0, the wait is as long as possible) * * Context: task context, might sleep. * * This function is just like usb_blk_msg(), except that it waits in a * killable state and there is no limit on the timeout length. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. * */int usb_bulk_msg_killable(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout){ struct urb *urb; struct usb_host_endpoint *ep; ep = usb_pipe_endpoint(usb_dev, pipe); if (!ep || len < 0) return -EINVAL; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); usb_fill_int_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL, ep->desc.bInterval); } else usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length, true);}EXPORT_SYMBOL_GPL(usb_bulk_msg_killable); /*-------------------------------------------------------------------*/ static void sg_clean(struct usb_sg_request *io){ if (io->urbs) { while (io->entries--) usb_free_urb(io->urbs[io->entries]); kfree(io->urbs); io->urbs = NULL; } io->dev = NULL;} static void sg_complete(struct urb *urb){ unsigned long flags; struct usb_sg_request *io = urb->context; int status = urb->status; spin_lock_irqsave(&io->lock, flags); /* In 2.5 we require hcds' endpoint queues not to progress after fault * reports, until the completion callback (this!) returns. That lets * device driver code (like this routine) unlink queued urbs first, * if it needs to, since the HC won't work on them at all. So it's * not possible for page N+1 to overwrite page N, and so on. * * That's only for "hard" faults; "soft" faults (unlinks) sometimes * complete before the HCD can get requests away from hardware, * though never during cleanup after a hard fault. */ if (io->status && (io->status != -ECONNRESET || status != -ECONNRESET) && urb->actual_length) { dev_err(io->dev->bus->controller, "dev %s ep%d%s scatterlist error %d/%d\n", io->dev->devpath, usb_endpoint_num(&urb->ep->desc), usb_urb_dir_in(urb) ? "in" : "out", status, io->status); /* BUG (); */ } if (io->status == 0 && status && status != -ECONNRESET) { int i, found, retval; io->status = status; /* the previous urbs, and this one, completed already. * unlink pending urbs so they won't rx/tx bad data.Lines 1–500 of 2521. Load more
// SPDX-License-Identifier: GPL-2.0 /* * message.c - synchronous message handling * * Released under the GPLv2 only. */ #include <linux/acpi.h> #include <linux/pci.h> /* for scatterlist macros */ #include <linux/usb.h> #include <linux/module.h> #include <linux/of.h> #include <linux/slab.h> #include <linux/mm.h> #include <linux/timer.h> #include <linux/ctype.h> #include <linux/nls.h> #include <linux/device.h> #include <linux/scatterlist.h> #include <linux/usb/cdc.h> #include <linux/usb/quirks.h> #include <linux/usb/hcd.h> /* for usbcore internals */ #include <linux/usb/of.h> #include <asm/byteorder.h> #include "usb.h" static void cancel_async_set_config(struct usb_device *udev); struct api_context { struct completion done; int status; }; static void usb_api_blocking_completion(struct urb *urb) { struct api_context *ctx = urb->context; ctx->status = urb->status; complete(&ctx->done); } /* * Starts urb and waits for completion or timeout. * Whether or not the wait is killable depends on the flag passed in. * For example, compare usb_bulk_msg() and usb_bulk_msg_killable(). * * For non-killable waits, we enforce a maximum limit on the timeout value. */ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length, bool killable) { struct api_context ctx; unsigned long expire; int retval; long rc; init_completion(&ctx.done); urb->context = &ctx; urb->actual_length = 0; retval = usb_submit_urb(urb, GFP_NOIO); if (unlikely(retval)) goto out; if (!killable && (timeout <= 0 || timeout > USB_MAX_SYNCHRONOUS_TIMEOUT)) timeout = USB_MAX_SYNCHRONOUS_TIMEOUT; expire = (timeout > 0) ? msecs_to_jiffies(timeout) : MAX_SCHEDULE_TIMEOUT; if (killable) rc = wait_for_completion_killable_timeout(&ctx.done, expire); else rc = wait_for_completion_timeout(&ctx.done, expire); if (rc <= 0) { usb_kill_urb(urb); if (ctx.status != -ENOENT) retval = ctx.status; else if (rc == 0) retval = -ETIMEDOUT; else retval = rc; dev_dbg(&urb->dev->dev, "%s timed out or killed on ep%d%s len=%u/%u\n", current->comm, usb_endpoint_num(&urb->ep->desc), usb_urb_dir_in(urb) ? "in" : "out", urb->actual_length, urb->transfer_buffer_length); } else retval = ctx.status; out: if (actual_length) *actual_length = urb->actual_length; usb_free_urb(urb); return retval; } /*-------------------------------------------------------------------*/ /* returns status (negative) or length (positive) */ static int usb_internal_control_msg(struct usb_device *usb_dev, unsigned int pipe, struct usb_ctrlrequest *cmd, void *data, int len, int timeout) { struct urb *urb; int retv; int length; urb = usb_alloc_urb(0, GFP_NOIO); if (!urb) return -ENOMEM; usb_fill_control_urb(urb, usb_dev, pipe, (unsigned char *)cmd, data, len, usb_api_blocking_completion, NULL); retv = usb_start_wait_urb(urb, timeout, &length, false); if (retv < 0) return retv; else return length; } /** * usb_control_msg - Builds a control urb, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @data: pointer to the data to send * @size: length in bytes of the data to send * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple control message to a specified endpoint and * waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Return: If successful, the number of bytes transferred. Otherwise, a negative * error number. */ int usb_control_msg(struct usb_device *dev, unsigned int pipe, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *data, __u16 size, int timeout) { struct usb_ctrlrequest *dr; int ret; dr = kmalloc_obj(struct usb_ctrlrequest, GFP_NOIO); if (!dr) return -ENOMEM; dr->bRequestType = requesttype; dr->bRequest = request; dr->wValue = cpu_to_le16(value); dr->wIndex = cpu_to_le16(index); dr->wLength = cpu_to_le16(size); ret = usb_internal_control_msg(dev, pipe, dr, data, size, timeout); /* Linger a bit, prior to the next control message. */ if (dev->quirks & USB_QUIRK_DELAY_CTRL_MSG) msleep(200); kfree(dr); return ret; } EXPORT_SYMBOL_GPL(usb_control_msg); /** * usb_control_msg_send - Builds a control "send" message, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @endpoint: endpoint to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @driver_data: pointer to the data to send * @size: length in bytes of the data to send * @timeout: time in msecs to wait for the message to complete before timing out * @memflags: the flags for memory allocation for buffers * * Context: !in_interrupt () * * This function sends a control message to a specified endpoint that is not * expected to fill in a response (i.e. a "send message") and waits for the * message to complete, or timeout. * * Do not use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * The data pointer can be made to a reference on the stack, or anywhere else, * as it will not be modified at all. This does not have the restriction that * usb_control_msg() has where the data pointer must be to dynamically allocated * memory (i.e. memory that can be successfully DMAed to a device). * * Return: If successful, 0 is returned, Otherwise, a negative error number. */ int usb_control_msg_send(struct usb_device *dev, __u8 endpoint, __u8 request, __u8 requesttype, __u16 value, __u16 index, const void *driver_data, __u16 size, int timeout, gfp_t memflags) { unsigned int pipe = usb_sndctrlpipe(dev, endpoint); int ret; u8 *data = NULL; if (size) { data = kmemdup(driver_data, size, memflags); if (!data) return -ENOMEM; } ret = usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout); kfree(data); if (ret < 0) return ret; return 0; } EXPORT_SYMBOL_GPL(usb_control_msg_send); /** * usb_control_msg_recv - Builds a control "receive" message, sends it off and waits for completion * @dev: pointer to the usb device to send the message to * @endpoint: endpoint to send the message to * @request: USB message request value * @requesttype: USB message request type value * @value: USB message value * @index: USB message index value * @driver_data: pointer to the data to be filled in by the message * @size: length in bytes of the data to be received * @timeout: time in msecs to wait for the message to complete before timing out * @memflags: the flags for memory allocation for buffers * * Context: !in_interrupt () * * This function sends a control message to a specified endpoint that is * expected to fill in a response (i.e. a "receive message") and waits for the * message to complete, or timeout. * * Do not use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb(). If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * The data pointer can be made to a reference on the stack, or anywhere else * that can be successfully written to. This function does not have the * restriction that usb_control_msg() has where the data pointer must be to * dynamically allocated memory (i.e. memory that can be successfully DMAed to a * device). * * The "whole" message must be properly received from the device in order for * this function to be successful. If a device returns less than the expected * amount of data, then the function will fail. Do not use this for messages * where a variable amount of data might be returned. * * Return: If successful, 0 is returned, Otherwise, a negative error number. */ int usb_control_msg_recv(struct usb_device *dev, __u8 endpoint, __u8 request, __u8 requesttype, __u16 value, __u16 index, void *driver_data, __u16 size, int timeout, gfp_t memflags) { unsigned int pipe = usb_rcvctrlpipe(dev, endpoint); int ret; u8 *data; if (!size || !driver_data) return -EINVAL; data = kmalloc(size, memflags); if (!data) return -ENOMEM; ret = usb_control_msg(dev, pipe, request, requesttype, value, index, data, size, timeout); if (ret < 0) goto exit; if (ret == size) { memcpy(driver_data, data, size); ret = 0; } else { ret = -EREMOTEIO; } exit: kfree(data); return ret; } EXPORT_SYMBOL_GPL(usb_control_msg_recv); /** * usb_interrupt_msg - Builds an interrupt urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple interrupt message to a specified endpoint and * waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb() If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. */ int usb_interrupt_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) { return usb_bulk_msg(usb_dev, pipe, data, len, actual_length, timeout); } EXPORT_SYMBOL_GPL(usb_interrupt_msg); /** * usb_bulk_msg - Builds a bulk urb, sends it off and waits for completion * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before timing out * * Context: task context, might sleep. * * This function sends a simple bulk message to a specified endpoint * and waits for the message to complete, or timeout. * * Don't use this function from within an interrupt context. If you need * an asynchronous message, or need to send a message from within interrupt * context, use usb_submit_urb() If a thread in your driver uses this call, * make sure your disconnect() method can wait for it to complete. Since you * don't have a handle on the URB used, you can't cancel the request. * * Because there is no usb_interrupt_msg() and no USBDEVFS_INTERRUPT ioctl, * users are forced to abuse this routine by using it to submit URBs for * interrupt endpoints. We will take the liberty of creating an interrupt URB * (with the default interval) if the target is an interrupt endpoint. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. * */ int usb_bulk_msg(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) { struct urb *urb; struct usb_host_endpoint *ep; ep = usb_pipe_endpoint(usb_dev, pipe); if (!ep || len < 0) return -EINVAL; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); usb_fill_int_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL, ep->desc.bInterval); } else usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length, false); } EXPORT_SYMBOL_GPL(usb_bulk_msg); /** * usb_bulk_msg_killable - Builds a bulk urb, sends it off and waits for completion in a killable state * @usb_dev: pointer to the usb device to send the message to * @pipe: endpoint "pipe" to send the message to * @data: pointer to the data to send * @len: length in bytes of the data to send * @actual_length: pointer to a location to put the actual length transferred * in bytes * @timeout: time in msecs to wait for the message to complete before * timing out (if <= 0, the wait is as long as possible) * * Context: task context, might sleep. * * This function is just like usb_blk_msg(), except that it waits in a * killable state and there is no limit on the timeout length. * * Return: * If successful, 0. Otherwise a negative error number. The number of actual * bytes transferred will be stored in the @actual_length parameter. * */ int usb_bulk_msg_killable(struct usb_device *usb_dev, unsigned int pipe, void *data, int len, int *actual_length, int timeout) { struct urb *urb; struct usb_host_endpoint *ep; ep = usb_pipe_endpoint(usb_dev, pipe); if (!ep || len < 0) return -EINVAL; urb = usb_alloc_urb(0, GFP_KERNEL); if (!urb) return -ENOMEM; if ((ep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { pipe = (pipe & ~(3 << 30)) | (PIPE_INTERRUPT << 30); usb_fill_int_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL, ep->desc.bInterval); } else usb_fill_bulk_urb(urb, usb_dev, pipe, data, len, usb_api_blocking_completion, NULL); return usb_start_wait_urb(urb, timeout, actual_length, true); } EXPORT_SYMBOL_GPL(usb_bulk_msg_killable); /*-------------------------------------------------------------------*/ static void sg_clean(struct usb_sg_request *io) { if (io->urbs) { while (io->entries--) usb_free_urb(io->urbs[io->entries]); kfree(io->urbs); io->urbs = NULL; } io->dev = NULL; } static void sg_complete(struct urb *urb) { unsigned long flags; struct usb_sg_request *io = urb->context; int status = urb->status; spin_lock_irqsave(&io->lock, flags); /* In 2.5 we require hcds' endpoint queues not to progress after fault * reports, until the completion callback (this!) returns. That lets * device driver code (like this routine) unlink queued urbs first, * if it needs to, since the HC won't work on them at all. So it's * not possible for page N+1 to overwrite page N, and so on. * * That's only for "hard" faults; "soft" faults (unlinks) sometimes * complete before the HCD can get requests away from hardware, * though never during cleanup after a hard fault. */ if (io->status && (io->status != -ECONNRESET || status != -ECONNRESET) && urb->actual_length) { dev_err(io->dev->bus->controller, "dev %s ep%d%s scatterlist error %d/%d\n", io->dev->devpath, usb_endpoint_num(&urb->ep->desc), usb_urb_dir_in(urb) ? "in" : "out", status, io->status); /* BUG (); */ } if (io->status == 0 && status && status != -ECONNRESET) { int i, found, retval; io->status = status; /* the previous urbs, and this one, completed already. * unlink pending urbs so they won't rx/tx bad data.