444 lines · 12.6 KB · C
RawDownload
#ifndef _ASM_POWERPC_MPIC_H#define _ASM_POWERPC_MPIC_H#ifdef __KERNEL__ #include <linux/irq.h>#include <asm/dcr.h> /* * Global registers */ #define MPIC_GREG_BASE			0x01000 #define MPIC_GREG_FEATURE_0		0x00000#define		MPIC_GREG_FEATURE_LAST_SRC_MASK		0x07ff0000#define		MPIC_GREG_FEATURE_LAST_SRC_SHIFT	16#define		MPIC_GREG_FEATURE_LAST_CPU_MASK		0x00001f00#define		MPIC_GREG_FEATURE_LAST_CPU_SHIFT	8#define		MPIC_GREG_FEATURE_VERSION_MASK		0xff#define MPIC_GREG_FEATURE_1		0x00010#define MPIC_GREG_GLOBAL_CONF_0		0x00020#define		MPIC_GREG_GCONF_RESET			0x80000000#define		MPIC_GREG_GCONF_8259_PTHROU_DIS		0x20000000#define		MPIC_GREG_GCONF_BASE_MASK		0x000fffff#define MPIC_GREG_GLOBAL_CONF_1		0x00030#define		MPIC_GREG_GLOBAL_CONF_1_SIE		0x08000000#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK	0x70000000#define		MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO(r)	\			(((r) << 28) & MPIC_GREG_GLOBAL_CONF_1_CLK_RATIO_MASK)#define MPIC_GREG_VENDOR_0		0x00040#define MPIC_GREG_VENDOR_1		0x00050#define MPIC_GREG_VENDOR_2		0x00060#define MPIC_GREG_VENDOR_3		0x00070#define MPIC_GREG_VENDOR_ID		0x00080#define 	MPIC_GREG_VENDOR_ID_STEPPING_MASK	0x00ff0000#define 	MPIC_GREG_VENDOR_ID_STEPPING_SHIFT	16#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_MASK	0x0000ff00#define 	MPIC_GREG_VENDOR_ID_DEVICE_ID_SHIFT	8#define 	MPIC_GREG_VENDOR_ID_VENDOR_ID_MASK	0x000000ff#define MPIC_GREG_PROCESSOR_INIT	0x00090#define MPIC_GREG_IPI_VECTOR_PRI_0	0x000a0#define MPIC_GREG_IPI_VECTOR_PRI_1	0x000b0#define MPIC_GREG_IPI_VECTOR_PRI_2	0x000c0#define MPIC_GREG_IPI_VECTOR_PRI_3	0x000d0#define MPIC_GREG_IPI_STRIDE		0x10#define MPIC_GREG_SPURIOUS		0x000e0#define MPIC_GREG_TIMER_FREQ		0x000f0 /* * * Timer registers */#define MPIC_TIMER_BASE			0x01100#define MPIC_TIMER_STRIDE		0x40 #define MPIC_TIMER_CURRENT_CNT		0x00000#define MPIC_TIMER_BASE_CNT		0x00010#define MPIC_TIMER_VECTOR_PRI		0x00020#define MPIC_TIMER_DESTINATION		0x00030 /* * Per-Processor registers */ #define MPIC_CPU_THISBASE		0x00000#define MPIC_CPU_BASE			0x20000#define MPIC_CPU_STRIDE			0x01000 #define MPIC_CPU_IPI_DISPATCH_0		0x00040#define MPIC_CPU_IPI_DISPATCH_1		0x00050#define MPIC_CPU_IPI_DISPATCH_2		0x00060#define MPIC_CPU_IPI_DISPATCH_3		0x00070#define MPIC_CPU_IPI_DISPATCH_STRIDE	0x00010#define MPIC_CPU_CURRENT_TASK_PRI	0x00080#define 	MPIC_CPU_TASKPRI_MASK			0x0000000f#define MPIC_CPU_WHOAMI			0x00090#define 	MPIC_CPU_WHOAMI_MASK			0x0000001f#define MPIC_CPU_INTACK			0x000a0#define MPIC_CPU_EOI			0x000b0 /* * Per-source registers */ #define MPIC_IRQ_BASE			0x10000#define MPIC_IRQ_STRIDE			0x00020#define MPIC_IRQ_VECTOR_PRI		0x00000#define 	MPIC_VECPRI_MASK			0x80000000#define 	MPIC_VECPRI_ACTIVITY			0x40000000	/* Read Only */#define 	MPIC_VECPRI_PRIORITY_MASK		0x000f0000#define 	MPIC_VECPRI_PRIORITY_SHIFT		16#define 	MPIC_VECPRI_VECTOR_MASK			0x000007ff#define 	MPIC_VECPRI_POLARITY_POSITIVE		0x00800000#define 	MPIC_VECPRI_POLARITY_NEGATIVE		0x00000000#define 	MPIC_VECPRI_POLARITY_MASK		0x00800000#define 	MPIC_VECPRI_SENSE_LEVEL			0x00400000#define 	MPIC_VECPRI_SENSE_EDGE			0x00000000#define 	MPIC_VECPRI_SENSE_MASK			0x00400000#define MPIC_IRQ_DESTINATION		0x00010 #define MPIC_MAX_IRQ_SOURCES	2048#define MPIC_MAX_CPUS		32#define MPIC_MAX_ISU		32 /* * Tsi108 implementation of MPIC has many differences from the original one */ /* * Global registers */ #define TSI108_GREG_BASE		0x00000#define TSI108_GREG_FEATURE_0		0x00000#define TSI108_GREG_GLOBAL_CONF_0	0x00004#define TSI108_GREG_VENDOR_ID		0x0000c#define TSI108_GREG_IPI_VECTOR_PRI_0	0x00204		/* Doorbell 0 */#define TSI108_GREG_IPI_STRIDE		0x0c#define TSI108_GREG_SPURIOUS		0x00010#define TSI108_GREG_TIMER_FREQ		0x00014 /* * Timer registers */#define TSI108_TIMER_BASE		0x0030#define TSI108_TIMER_STRIDE		0x10#define TSI108_TIMER_CURRENT_CNT	0x00000#define TSI108_TIMER_BASE_CNT		0x00004#define TSI108_TIMER_VECTOR_PRI		0x00008#define TSI108_TIMER_DESTINATION	0x0000c /* * Per-Processor registers */#define TSI108_CPU_BASE			0x00300#define TSI108_CPU_STRIDE		0x00040#define TSI108_CPU_IPI_DISPATCH_0	0x00200#define TSI108_CPU_IPI_DISPATCH_STRIDE	0x00000#define TSI108_CPU_CURRENT_TASK_PRI	0x00000#define TSI108_CPU_WHOAMI		0xffffffff#define TSI108_CPU_INTACK		0x00004#define TSI108_CPU_EOI			0x00008 /* * Per-source registers */#define TSI108_IRQ_BASE			0x00100#define TSI108_IRQ_STRIDE		0x00008#define TSI108_IRQ_VECTOR_PRI		0x00000#define TSI108_VECPRI_VECTOR_MASK	0x000000ff#define TSI108_VECPRI_POLARITY_POSITIVE	0x01000000#define TSI108_VECPRI_POLARITY_NEGATIVE	0x00000000#define TSI108_VECPRI_SENSE_LEVEL	0x02000000#define TSI108_VECPRI_SENSE_EDGE	0x00000000#define TSI108_VECPRI_POLARITY_MASK	0x01000000#define TSI108_VECPRI_SENSE_MASK	0x02000000#define TSI108_IRQ_DESTINATION		0x00004 /* weird mpic register indices and mask bits in the HW info array */enum {	MPIC_IDX_GREG_BASE = 0,	MPIC_IDX_GREG_FEATURE_0,	MPIC_IDX_GREG_GLOBAL_CONF_0,	MPIC_IDX_GREG_VENDOR_ID,	MPIC_IDX_GREG_IPI_VECTOR_PRI_0,	MPIC_IDX_GREG_IPI_STRIDE,	MPIC_IDX_GREG_SPURIOUS,	MPIC_IDX_GREG_TIMER_FREQ, 	MPIC_IDX_TIMER_BASE,	MPIC_IDX_TIMER_STRIDE,	MPIC_IDX_TIMER_CURRENT_CNT,	MPIC_IDX_TIMER_BASE_CNT,	MPIC_IDX_TIMER_VECTOR_PRI,	MPIC_IDX_TIMER_DESTINATION, 	MPIC_IDX_CPU_BASE,	MPIC_IDX_CPU_STRIDE,	MPIC_IDX_CPU_IPI_DISPATCH_0,	MPIC_IDX_CPU_IPI_DISPATCH_STRIDE,	MPIC_IDX_CPU_CURRENT_TASK_PRI,	MPIC_IDX_CPU_WHOAMI,	MPIC_IDX_CPU_INTACK,	MPIC_IDX_CPU_EOI, 	MPIC_IDX_IRQ_BASE,	MPIC_IDX_IRQ_STRIDE,	MPIC_IDX_IRQ_VECTOR_PRI, 	MPIC_IDX_VECPRI_VECTOR_MASK,	MPIC_IDX_VECPRI_POLARITY_POSITIVE,	MPIC_IDX_VECPRI_POLARITY_NEGATIVE,	MPIC_IDX_VECPRI_SENSE_LEVEL,	MPIC_IDX_VECPRI_SENSE_EDGE,	MPIC_IDX_VECPRI_POLARITY_MASK,	MPIC_IDX_VECPRI_SENSE_MASK,	MPIC_IDX_IRQ_DESTINATION,	MPIC_IDX_END};  #ifdef CONFIG_MPIC_BROKEN_U3/* Fixup table entry */struct mpic_irq_fixup{	u8 __iomem	*base;	u8 __iomem	*applebase;	u32		data;	unsigned int	index;};#endif /* CONFIG_MPIC_BROKEN_U3 */  enum mpic_reg_type {	mpic_access_mmio_le,	mpic_access_mmio_be,#ifdef CONFIG_PPC_DCR	mpic_access_dcr#endif}; struct mpic_reg_bank {	u32 __iomem	*base;#ifdef CONFIG_PPC_DCR	dcr_host_t	dhost;	unsigned int	dbase;	unsigned int	doff;#endif /* CONFIG_PPC_DCR */}; /* The instance data of a given MPIC */struct mpic{	/* The device node of the interrupt controller */	struct device_node	*of_node; 	/* The remapper for this MPIC */	struct irq_host		*irqhost; 	/* The "linux" controller struct */	struct irq_chip		hc_irq;#ifdef CONFIG_MPIC_BROKEN_U3	struct irq_chip		hc_ht_irq;#endif#ifdef CONFIG_SMP	struct irq_chip		hc_ipi;#endif	const char		*name;	/* Flags */	unsigned int		flags;	/* How many irq sources in a given ISU */	unsigned int		isu_size;	unsigned int		isu_shift;	unsigned int		isu_mask;	unsigned int		irq_count;	/* Number of sources */	unsigned int		num_sources;	/* Number of CPUs */	unsigned int		num_cpus;	/* default senses array */	unsigned char		*senses;	unsigned int		senses_count; 	/* vector numbers used for internal sources (ipi/timers) */	unsigned int		ipi_vecs[4];	unsigned int		timer_vecs[4]; 	/* Spurious vector to program into unused sources */	unsigned int		spurious_vec; #ifdef CONFIG_MPIC_BROKEN_U3	/* The fixup table */	struct mpic_irq_fixup	*fixups;	spinlock_t		fixup_lock;#endif 	/* Register access method */	enum mpic_reg_type	reg_type; 	/* The various ioremap'ed bases */	struct mpic_reg_bank	gregs;	struct mpic_reg_bank	tmregs;	struct mpic_reg_bank	cpuregs[MPIC_MAX_CPUS];	struct mpic_reg_bank	isus[MPIC_MAX_ISU]; #ifdef CONFIG_PPC_DCR	unsigned int		dcr_base;#endif #ifdef CONFIG_MPIC_WEIRD	/* Pointer to HW info array */	u32			*hw_set;#endif 	/* link */	struct mpic		*next;}; /* * MPIC flags (passed to mpic_alloc) * * The top 4 bits contain an MPIC bhw id that is used to index the * register offsets and some masks when CONFIG_MPIC_WEIRD is set. * Note setting any ID (leaving those bits to 0) means standard MPIC */ /* This is the primary controller, only that one has IPIs and * has afinity control. A non-primary MPIC always uses CPU0 * registers only */#define MPIC_PRIMARY			0x00000001 /* Set this for a big-endian MPIC */#define MPIC_BIG_ENDIAN			0x00000002/* Broken U3 MPIC */#define MPIC_BROKEN_U3			0x00000004/* Broken IPI registers (autodetected) */#define MPIC_BROKEN_IPI			0x00000008/* MPIC wants a reset */#define MPIC_WANTS_RESET		0x00000010/* Spurious vector requires EOI */#define MPIC_SPV_EOI			0x00000020/* No passthrough disable */#define MPIC_NO_PTHROU_DIS		0x00000040/* DCR based MPIC */#define MPIC_USES_DCR			0x00000080/* MPIC has 11-bit vector fields (or larger) */#define MPIC_LARGE_VECTORS		0x00000100 /* MPIC HW modification ID */#define MPIC_REGSET_MASK		0xf0000000#define MPIC_REGSET(val)		(((val) & 0xf ) << 28)#define MPIC_GET_REGSET(flags)		(((flags) >> 28) & 0xf) #define	MPIC_REGSET_STANDARD		MPIC_REGSET(0)	/* Original MPIC */#define	MPIC_REGSET_TSI108		MPIC_REGSET(1)	/* Tsi108/109 PIC */ /* Allocate the controller structure and setup the linux irq descs * for the range if interrupts passed in. No HW initialization is * actually performed. *  * @phys_addr:	physial base address of the MPIC * @flags:	flags, see constants above * @isu_size:	number of interrupts in an ISU. Use 0 to use a *              standard ISU-less setup (aka powermac) * @irq_offset: first irq number to assign to this mpic * @irq_count:  number of irqs to use with this mpic IRQ sources. Pass 0 *	        to match the number of sources * @ipi_offset: first irq number to assign to this mpic IPI sources, *		used only on primary mpic * @senses:	array of sense values * @senses_num: number of entries in the array * * Note about the sense array. If none is passed, all interrupts are * setup to be level negative unless MPIC_BROKEN_U3 is set in which * case they are edge positive (and the array is ignored anyway). * The values in the array start at the first source of the MPIC, * that is senses[0] correspond to linux irq "irq_offset". */extern struct mpic *mpic_alloc(struct device_node *node,			       phys_addr_t phys_addr,			       unsigned int flags,			       unsigned int isu_size,			       unsigned int irq_count,			       const char *name); /* Assign ISUs, to call before mpic_init() * * @mpic:	controller structure as returned by mpic_alloc() * @isu_num:	ISU number * @phys_addr:	physical address of the ISU */extern void mpic_assign_isu(struct mpic *mpic, unsigned int isu_num,			    phys_addr_t phys_addr); /* Set default sense codes * * @mpic:	controller * @senses:	array of sense codes * @count:	size of above array * * Optionally provide an array (indexed on hardware interrupt numbers * for this MPIC) of default sense codes for the chip. Those are linux * sense codes IRQ_TYPE_* * * The driver gets ownership of the pointer, don't dispose of it or * anything like that. __init only. */extern void mpic_set_default_senses(struct mpic *mpic, u8 *senses, int count);  /* Initialize the controller. After this has been called, none of the above * should be called again for this mpic */extern void mpic_init(struct mpic *mpic); /* * All of the following functions must only be used after the * ISUs have been assigned and the controller fully initialized * with mpic_init() */  /* Change/Read the priority of an interrupt. Default is 8 for irqs and * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the * IPI number is then the offset'ed (linux irq number mapped to the IPI) */extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);extern unsigned int mpic_irq_get_priority(unsigned int irq); /* Setup a non-boot CPU */extern void mpic_setup_this_cpu(void); /* Clean up for kexec (or cpu offline or ...) */extern void mpic_teardown_this_cpu(int secondary); /* Get the current cpu priority for this cpu (0..15) */extern int mpic_cpu_get_priority(void); /* Set the current cpu priority for this cpu */extern void mpic_cpu_set_priority(int prio); /* Request IPIs on primary mpic */extern void mpic_request_ipis(void); /* Send an IPI (non offseted number 0..3) */extern void mpic_send_ipi(unsigned int ipi_no, unsigned int cpu_mask); /* Send a message (IPI) to a given target (cpu number or MSG_*) */void smp_mpic_message_pass(int target, int msg); /* Fetch interrupt from a given mpic */extern unsigned int mpic_get_one_irq(struct mpic *mpic);/* This one gets to the primary mpic */extern unsigned int mpic_get_irq(void); /* Set the EPIC clock ratio */void mpic_set_clk_ratio(struct mpic *mpic, u32 clock_ratio); /* Enable/Disable EPIC serial interrupt mode */void mpic_set_serial_int(struct mpic *mpic, int enable); #endif /* __KERNEL__ */#endif	/* _ASM_POWERPC_MPIC_H */

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t