#!/usr/bin/perl -w## Clean a patch file -- or directory of patch files -- of stealth whitespace.# WARNING: this can be a highly destructive operation. Use with caution.# use bytes;use File::Basename; ## Clean up space-tab sequences, either by removing spaces or# replacing them with tabs.sub clean_space_tabs($){ no bytes; # Tab alignment depends on characters my($li) = @_; my($lo) = ''; my $pos = 0; my $nsp = 0; my($i, $c); for ($i = 0; $i < length($li); $i++) { $c = substr($li, $i, 1); if ($c eq "\t") { my $npos = ($pos+$nsp+8) & ~7; my $ntab = ($npos >> 3) - ($pos >> 3); $lo .= "\t" x $ntab; $pos = $npos; $nsp = 0; } elsif ($c eq "\n" || $c eq "\r") { $lo .= " " x $nsp; $pos += $nsp; $nsp = 0; $lo .= $c; $pos = 0; } elsif ($c eq " ") { $nsp++; } else { $lo .= " " x $nsp; $pos += $nsp; $nsp = 0; $lo .= $c; $pos++; } } $lo .= " " x $nsp; return $lo;} $name = basename($0); foreach $f ( @ARGV ) { print STDERR "$name: $f\n"; if (! -f $f) { print STDERR "$f: not a file\n"; next; } if (!open(FILE, '+<', $f)) { print STDERR "$name: Cannot open file: $f: $!\n"; next; } binmode FILE; # First, verify that it is not a binary file; consider any file # with a zero byte to be a binary file. Is there any better, or # additional, heuristic that should be applied? $is_binary = 0; while (read(FILE, $data, 65536) > 0) { if ($data =~ /\0/) { $is_binary = 1; last; } } if ($is_binary) { print STDERR "$name: $f: binary file\n"; next; } seek(FILE, 0, 0); $in_bytes = 0; $out_bytes = 0; @lines = (); $in_hunk = 0; $err = 0; while ( defined($line = <FILE>) ) { $in_bytes += length($line); if (!$in_hunk) { if ($line =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@/) { $minus_lines = $2; $plus_lines = $4; if ($minus_lines || $plus_lines) { $in_hunk = 1; @hunk_lines = ($line); } } else { push(@lines, $line); $out_bytes += length($line); } } else { # We're in a hunk if ($line =~ /^\+/) { $plus_lines--; $text = substr($line, 1); $text =~ s/[ \t\r]*$//; # Remove trailing spaces $text = clean_space_tabs($text); push(@hunk_lines, '+'.$text); } elsif ($line =~ /^\-/) { $minus_lines--; push(@hunk_lines, $line); } elsif ($line =~ /^ /) { $plus_lines--; $minus_lines--; push(@hunk_lines, $line); } else { print STDERR "$name: $f: malformed patch\n"; $err = 1; last; } if ($plus_lines < 0 || $minus_lines < 0) { print STDERR "$name: $f: malformed patch\n"; $err = 1; last; } elsif ($plus_lines == 0 && $minus_lines == 0) { # End of a hunk. Process this hunk. my $i; my $l; my @h = (); my $adj = 0; my $done = 0; for ($i = scalar(@hunk_lines)-1; $i > 0; $i--) { $l = $hunk_lines[$i]; if (!$done && $l eq "+\n") { $adj++; # Skip this line } elsif ($l =~ /^[ +]/) { $done = 1; unshift(@h, $l); } else { unshift(@h, $l); } } $l = $hunk_lines[0]; # Hunk header undef @hunk_lines; # Free memory if ($adj) { die unless ($l =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@(.*)$/); my $mstart = $1; my $mlin = $2; my $pstart = $3; my $plin = $4; my $tail = $5; # doesn't include the final newline $l = sprintf("@@ -%d,%d +%d,%d @@%s\n", $mstart, $mlin, $pstart, $plin-$adj, $tail); } unshift(@h, $l); # Transfer to the output array foreach $l (@h) { $out_bytes += length($l); push(@lines, $l); } $in_hunk = 0; } } } if ($in_hunk) { print STDERR "$name: $f: malformed patch\n"; $err = 1; } if (!$err) { if ($in_bytes != $out_bytes) { # Only write to the file if changed seek(FILE, 0, 0); print FILE @lines; if ( !defined($where = tell(FILE)) || !truncate(FILE, $where) ) { die "$name: Failed to truncate modified file: $f: $!\n"; } } } close(FILE);}
#!/usr/bin/perl -w
#
# Clean a patch file -- or directory of patch files -- of stealth whitespace.
# WARNING: this can be a highly destructive operation. Use with caution.
#
use bytes;
use File::Basename;
#
# Clean up space-tab sequences, either by removing spaces or
# replacing them with tabs.
sub clean_space_tabs($)
{
no bytes; # Tab alignment depends on characters
my($li) = @_;
my($lo) = '';
my $pos = 0;
my $nsp = 0;
my($i, $c);
for ($i = 0; $i < length($li); $i++) {
$c = substr($li, $i, 1);
if ($c eq "\t") {
my $npos = ($pos+$nsp+8) & ~7;
my $ntab = ($npos >> 3) - ($pos >> 3);
$lo .= "\t" x $ntab;
$pos = $npos;
$nsp = 0;
} elsif ($c eq "\n" || $c eq "\r") {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos = 0;
} elsif ($c eq " ") {
$nsp++;
} else {
$lo .= " " x $nsp;
$pos += $nsp;
$nsp = 0;
$lo .= $c;
$pos++;
}
}
$lo .= " " x $nsp;
return $lo;
}
$name = basename($0);
foreach $f ( @ARGV ) {
print STDERR "$name: $f\n";
if (! -f $f) {
print STDERR "$f: not a file\n";
next;
}
if (!open(FILE, '+<', $f)) {
print STDERR "$name: Cannot open file: $f: $!\n";
next;
}
binmode FILE;
# First, verify that it is not a binary file; consider any file
# with a zero byte to be a binary file. Is there any better, or
# additional, heuristic that should be applied?
$is_binary = 0;
while (read(FILE, $data, 65536) > 0) {
if ($data =~ /\0/) {
$is_binary = 1;
last;
}
}
if ($is_binary) {
print STDERR "$name: $f: binary file\n";
next;
}
seek(FILE, 0, 0);
$in_bytes = 0;
$out_bytes = 0;
@lines = ();
$in_hunk = 0;
$err = 0;
while ( defined($line = <FILE>) ) {
$in_bytes += length($line);
if (!$in_hunk) {
if ($line =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@/) {
$minus_lines = $2;
$plus_lines = $4;
if ($minus_lines || $plus_lines) {
$in_hunk = 1;
@hunk_lines = ($line);
}
} else {
push(@lines, $line);
$out_bytes += length($line);
}
} else {
# We're in a hunk
if ($line =~ /^\+/) {
$plus_lines--;
$text = substr($line, 1);
$text =~ s/[ \t\r]*$//; # Remove trailing spaces
$text = clean_space_tabs($text);
push(@hunk_lines, '+'.$text);
} elsif ($line =~ /^\-/) {
$minus_lines--;
push(@hunk_lines, $line);
} elsif ($line =~ /^ /) {
$plus_lines--;
$minus_lines--;
push(@hunk_lines, $line);
} else {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
last;
}
if ($plus_lines < 0 || $minus_lines < 0) {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
last;
} elsif ($plus_lines == 0 && $minus_lines == 0) {
# End of a hunk. Process this hunk.
my $i;
my $l;
my @h = ();
my $adj = 0;
my $done = 0;
for ($i = scalar(@hunk_lines)-1; $i > 0; $i--) {
$l = $hunk_lines[$i];
if (!$done && $l eq "+\n") {
$adj++; # Skip this line
} elsif ($l =~ /^[ +]/) {
$done = 1;
unshift(@h, $l);
} else {
unshift(@h, $l);
}
}
$l = $hunk_lines[0]; # Hunk header
undef @hunk_lines; # Free memory
if ($adj) {
die unless
($l =~ /^\@\@\s+\-([0-9]+),([0-9]+)\s+\+([0-9]+),([0-9]+)\s\@\@(.*)$/);
my $mstart = $1;
my $mlin = $2;
my $pstart = $3;
my $plin = $4;
my $tail = $5; # doesn't include the final newline
$l = sprintf("@@ -%d,%d +%d,%d @@%s\n",
$mstart, $mlin, $pstart, $plin-$adj,
$tail);
}
unshift(@h, $l);
# Transfer to the output array
foreach $l (@h) {
$out_bytes += length($l);
push(@lines, $l);
}
$in_hunk = 0;
}
}
}
if ($in_hunk) {
print STDERR "$name: $f: malformed patch\n";
$err = 1;
}
if (!$err) {
if ($in_bytes != $out_bytes) {
# Only write to the file if changed
seek(FILE, 0, 0);
print FILE @lines;
if ( !defined($where = tell(FILE)) ||
!truncate(FILE, $where) ) {
die "$name: Failed to truncate modified file: $f: $!\n";
}
}
}
close(FILE);
}