/* * Definitions for ADB (Apple Desktop Bus) support. */#ifndef __ADB_H#define __ADB_H /* ADB commands */#define ADB_BUSRESET 0#define ADB_FLUSH(id) (0x01 | ((id) << 4))#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4)) /* ADB default device IDs (upper 4 bits of ADB command byte) */#define ADB_DONGLE 1 /* "software execution control" devices */#define ADB_KEYBOARD 2#define ADB_MOUSE 3#define ADB_TABLET 4#define ADB_MODEM 5#define ADB_MISC 7 /* maybe a monitor */ #define ADB_RET_OK 0#define ADB_RET_TIMEOUT 3 /* The kind of ADB request. The controller may emulate some or all of those CUDA/PMU packet kinds */#define ADB_PACKET 0#define CUDA_PACKET 1#define ERROR_PACKET 2#define TIMER_PACKET 3#define POWER_PACKET 4#define MACIIC_PACKET 5#define PMU_PACKET 6#define ADB_QUERY 7 /* ADB queries */ /* ADB_QUERY_GETDEVINFO * Query ADB slot for device presence * data[2] = id, rep[0] = orig addr, rep[1] = handler_id */#define ADB_QUERY_GETDEVINFO 1 #ifdef __KERNEL__ struct adb_request { unsigned char data[32]; int nbytes; unsigned char reply[32]; int reply_len; unsigned char reply_expected; unsigned char sent; unsigned char complete; void (*done)(struct adb_request *); void *arg; struct adb_request *next;}; struct adb_ids { int nids; unsigned char id[16];}; /* Structure which encapsulates a low-level ADB driver */ struct adb_driver { char name[16]; int (*probe)(void); int (*init)(void); int (*send_request)(struct adb_request *req, int sync); int (*autopoll)(int devs); void (*poll)(void); int (*reset_bus)(void);}; /* Values for adb_request flags */#define ADBREQ_REPLY 1 /* expect reply */#define ADBREQ_SYNC 2 /* poll until done */#define ADBREQ_NOSEND 4 /* build the request, but don't send it */ /* Messages sent thru the client_list notifier. You should NOT stop the operation, at least not with this version */enum adb_message { ADB_MSG_POWERDOWN, /* Currently called before sleep only */ ADB_MSG_PRE_RESET, /* Called before resetting the bus */ ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */};extern struct blocking_notifier_head adb_client_list; int adb_request(struct adb_request *req, void (*done)(struct adb_request *), int flags, int nbytes, ...);int adb_register(int default_id,int handler_id,struct adb_ids *ids, void (*handler)(unsigned char *, int, int));int adb_unregister(int index);void adb_poll(void);void adb_input(unsigned char *, int, int);int adb_reset_bus(void); int adb_try_handler_change(int address, int new_id);int adb_get_infos(int address, int *original_address, int *handler_id); #endif /* __KERNEL__ */ #endif /* __ADB_H */
/*
* Definitions for ADB (Apple Desktop Bus) support.
*/
#ifndef __ADB_H
#define __ADB_H
/* ADB commands */
#define ADB_BUSRESET 0
#define ADB_FLUSH(id) (0x01 | ((id) << 4))
#define ADB_WRITEREG(id, reg) (0x08 | (reg) | ((id) << 4))
#define ADB_READREG(id, reg) (0x0C | (reg) | ((id) << 4))
/* ADB default device IDs (upper 4 bits of ADB command byte) */
#define ADB_DONGLE 1 /* "software execution control" devices */
#define ADB_KEYBOARD 2
#define ADB_MOUSE 3
#define ADB_TABLET 4
#define ADB_MODEM 5
#define ADB_MISC 7 /* maybe a monitor */
#define ADB_RET_OK 0
#define ADB_RET_TIMEOUT 3
/* The kind of ADB request. The controller may emulate some
or all of those CUDA/PMU packet kinds */
#define ADB_PACKET 0
#define CUDA_PACKET 1
#define ERROR_PACKET 2
#define TIMER_PACKET 3
#define POWER_PACKET 4
#define MACIIC_PACKET 5
#define PMU_PACKET 6
#define ADB_QUERY 7
/* ADB queries */
/* ADB_QUERY_GETDEVINFO
* Query ADB slot for device presence
* data[2] = id, rep[0] = orig addr, rep[1] = handler_id
*/
#define ADB_QUERY_GETDEVINFO 1
#ifdef __KERNEL__
struct adb_request {
unsigned char data[32];
int nbytes;
unsigned char reply[32];
int reply_len;
unsigned char reply_expected;
unsigned char sent;
unsigned char complete;
void (*done)(struct adb_request *);
void *arg;
struct adb_request *next;
};
struct adb_ids {
int nids;
unsigned char id[16];
};
/* Structure which encapsulates a low-level ADB driver */
struct adb_driver {
char name[16];
int (*probe)(void);
int (*init)(void);
int (*send_request)(struct adb_request *req, int sync);
int (*autopoll)(int devs);
void (*poll)(void);
int (*reset_bus)(void);
};
/* Values for adb_request flags */
#define ADBREQ_REPLY 1 /* expect reply */
#define ADBREQ_SYNC 2 /* poll until done */
#define ADBREQ_NOSEND 4 /* build the request, but don't send it */
/* Messages sent thru the client_list notifier. You should NOT stop
the operation, at least not with this version */
enum adb_message {
ADB_MSG_POWERDOWN, /* Currently called before sleep only */
ADB_MSG_PRE_RESET, /* Called before resetting the bus */
ADB_MSG_POST_RESET /* Called after resetting the bus (re-do init & register) */
};
extern struct blocking_notifier_head adb_client_list;
int adb_request(struct adb_request *req, void (*done)(struct adb_request *),
int flags, int nbytes, ...);
int adb_register(int default_id,int handler_id,struct adb_ids *ids,
void (*handler)(unsigned char *, int, int));
int adb_unregister(int index);
void adb_poll(void);
void adb_input(unsigned char *, int, int);
int adb_reset_bus(void);
int adb_try_handler_change(int address, int new_id);
int adb_get_infos(int address, int *original_address, int *handler_id);
#endif /* __KERNEL__ */
#endif /* __ADB_H */