701 lines · 18.6 KB · C
RawDownload
/* * apb_timer.c: Driver for Langwell APB timers * * (C) Copyright 2009 Intel Corporation * Author: Jacob Pan (jacob.jun.pan@intel.com) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; version 2 * of the License. * * Note: * Langwell is the south complex of Intel Moorestown MID platform. There are * eight external timers in total that can be used by the operating system. * The timer information, such as frequency and addresses, is provided to the * OS via SFI tables. * Timer interrupts are routed via FW/HW emulated IOAPIC independently via * individual redirection table entries (RTE). * Unlike HPET, there is no master counter, therefore one of the timers are * used as clocksource. The overall allocation looks like: *  - timer 0 - NR_CPUs for per cpu timer *  - one timer for clocksource *  - one timer for watchdog driver. * It is also worth notice that APB timer does not support true one-shot mode, * free-running mode will be used here to emulate one-shot mode. * APB timer can also be used as broadcast timer along with per cpu local APIC * timer, but by default APB timer has higher rating than local APIC timers. */ #include <linux/clocksource.h>#include <linux/clockchips.h>#include <linux/delay.h>#include <linux/errno.h>#include <linux/init.h>#include <linux/sysdev.h>#include <linux/slab.h>#include <linux/pm.h>#include <linux/pci.h>#include <linux/sfi.h>#include <linux/interrupt.h>#include <linux/cpu.h>#include <linux/irq.h> #include <asm/fixmap.h>#include <asm/apb_timer.h>#include <asm/mrst.h> #define APBT_MASK			CLOCKSOURCE_MASK(32)#define APBT_SHIFT			22#define APBT_CLOCKEVENT_RATING		110#define APBT_CLOCKSOURCE_RATING		250#define APBT_MIN_DELTA_USEC		200 #define EVT_TO_APBT_DEV(evt) container_of(evt, struct apbt_dev, evt)#define APBT_CLOCKEVENT0_NUM   (0)#define APBT_CLOCKEVENT1_NUM   (1)#define APBT_CLOCKSOURCE_NUM   (2) static unsigned long apbt_address;static int apb_timer_block_enabled;static void __iomem *apbt_virt_address;static int phy_cs_timer_id; /* * Common DW APB timer info */static uint64_t apbt_freq; static void apbt_set_mode(enum clock_event_mode mode,			  struct clock_event_device *evt);static int apbt_next_event(unsigned long delta,			   struct clock_event_device *evt);static cycle_t apbt_read_clocksource(struct clocksource *cs);static void apbt_restart_clocksource(struct clocksource *cs); struct apbt_dev {	struct clock_event_device evt;	unsigned int num;	int cpu;	unsigned int irq;	unsigned int tick;	unsigned int count;	unsigned int flags;	char name[10];}; static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev); #ifdef CONFIG_SMPstatic unsigned int apbt_num_timers_used;static struct apbt_dev *apbt_devs;#endif static	inline unsigned long apbt_readl_reg(unsigned long a){	return readl(apbt_virt_address + a);} static inline void apbt_writel_reg(unsigned long d, unsigned long a){	writel(d, apbt_virt_address + a);} static inline unsigned long apbt_readl(int n, unsigned long a){	return readl(apbt_virt_address + a + n * APBTMRS_REG_SIZE);} static inline void apbt_writel(int n, unsigned long d, unsigned long a){	writel(d, apbt_virt_address + a + n * APBTMRS_REG_SIZE);} static inline void apbt_set_mapping(void){	struct sfi_timer_table_entry *mtmr; 	if (apbt_virt_address) {		pr_debug("APBT base already mapped\n");		return;	}	mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);	if (mtmr == NULL) {		printk(KERN_ERR "Failed to get MTMR %d from SFI\n",		       APBT_CLOCKEVENT0_NUM);		return;	}	apbt_address = (unsigned long)mtmr->phys_addr;	if (!apbt_address) {		printk(KERN_WARNING "No timer base from SFI, use default\n");		apbt_address = APBT_DEFAULT_BASE;	}	apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE);	if (apbt_virt_address) {		pr_debug("Mapped APBT physical addr %p at virtual addr %p\n",\			 (void *)apbt_address, (void *)apbt_virt_address);	} else {		pr_debug("Failed mapping APBT phy address at %p\n",\			 (void *)apbt_address);		goto panic_noapbt;	}	apbt_freq = mtmr->freq_hz / USEC_PER_SEC;	sfi_free_mtmr(mtmr); 	/* Now figure out the physical timer id for clocksource device */	mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM);	if (mtmr == NULL)		goto panic_noapbt; 	/* Now figure out the physical timer id */	phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff)		/ APBTMRS_REG_SIZE;	pr_debug("Use timer %d for clocksource\n", phy_cs_timer_id);	return; panic_noapbt:	panic("Failed to setup APB system timer\n"); } static inline void apbt_clear_mapping(void){	iounmap(apbt_virt_address);	apbt_virt_address = NULL;} /* * APBT timer interrupt enable / disable */static inline int is_apbt_capable(void){	return apbt_virt_address ? 1 : 0;} static struct clocksource clocksource_apbt = {	.name		= "apbt",	.rating		= APBT_CLOCKSOURCE_RATING,	.read		= apbt_read_clocksource,	.mask		= APBT_MASK,	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,	.resume		= apbt_restart_clocksource,}; /* boot APB clock event device */static struct clock_event_device apbt_clockevent = {	.name		= "apbt0",	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,	.set_mode	= apbt_set_mode,	.set_next_event = apbt_next_event,	.shift		= APBT_SHIFT,	.irq		= 0,	.rating		= APBT_CLOCKEVENT_RATING,}; /* * start count down from 0xffff_ffff. this is done by toggling the enable bit * then load initial load count to ~0. */static void apbt_start_counter(int n){	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); 	ctrl &= ~APBTMR_CONTROL_ENABLE;	apbt_writel(n, ctrl, APBTMR_N_CONTROL);	apbt_writel(n, ~0, APBTMR_N_LOAD_COUNT);	/* enable, mask interrupt */	ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC;	ctrl |= (APBTMR_CONTROL_ENABLE | APBTMR_CONTROL_INT);	apbt_writel(n, ctrl, APBTMR_N_CONTROL);	/* read it once to get cached counter value initialized */	apbt_read_clocksource(&clocksource_apbt);} static irqreturn_t apbt_interrupt_handler(int irq, void *data){	struct apbt_dev *dev = (struct apbt_dev *)data;	struct clock_event_device *aevt = &dev->evt; 	if (!aevt->event_handler) {		printk(KERN_INFO "Spurious APBT timer interrupt on %d\n",		       dev->num);		return IRQ_NONE;	}	aevt->event_handler(aevt);	return IRQ_HANDLED;} static void apbt_restart_clocksource(struct clocksource *cs){	apbt_start_counter(phy_cs_timer_id);} static void apbt_enable_int(int n){	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL);	/* clear pending intr */	apbt_readl(n, APBTMR_N_EOI);	ctrl &= ~APBTMR_CONTROL_INT;	apbt_writel(n, ctrl, APBTMR_N_CONTROL);} static void apbt_disable_int(int n){	unsigned long ctrl = apbt_readl(n, APBTMR_N_CONTROL); 	ctrl |= APBTMR_CONTROL_INT;	apbt_writel(n, ctrl, APBTMR_N_CONTROL);}  static int __init apbt_clockevent_register(void){	struct sfi_timer_table_entry *mtmr;	struct apbt_dev *adev = &__get_cpu_var(cpu_apbt_dev); 	mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);	if (mtmr == NULL) {		printk(KERN_ERR "Failed to get MTMR %d from SFI\n",		       APBT_CLOCKEVENT0_NUM);		return -ENODEV;	} 	/*	 * We need to calculate the scaled math multiplication factor for	 * nanosecond to apbt tick conversion.	 * mult = (nsec/cycle)*2^APBT_SHIFT	 */	apbt_clockevent.mult = div_sc((unsigned long) mtmr->freq_hz				      , NSEC_PER_SEC, APBT_SHIFT); 	/* Calculate the min / max delta */	apbt_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,							   &apbt_clockevent);	apbt_clockevent.min_delta_ns = clockevent_delta2ns(		APBT_MIN_DELTA_USEC*apbt_freq,		&apbt_clockevent);	/*	 * Start apbt with the boot cpu mask and make it	 * global if not used for per cpu timer.	 */	apbt_clockevent.cpumask = cpumask_of(smp_processor_id());	adev->num = smp_processor_id();	memcpy(&adev->evt, &apbt_clockevent, sizeof(struct clock_event_device)); 	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT) {		adev->evt.rating = APBT_CLOCKEVENT_RATING - 100;		global_clock_event = &adev->evt;		printk(KERN_DEBUG "%s clockevent registered as global\n",		       global_clock_event->name);	} 	if (request_irq(apbt_clockevent.irq, apbt_interrupt_handler,			IRQF_TIMER | IRQF_DISABLED | IRQF_NOBALANCING,			apbt_clockevent.name, adev)) {		printk(KERN_ERR "Failed request IRQ for APBT%d\n",		       apbt_clockevent.irq);	} 	clockevents_register_device(&adev->evt);	/* Start APBT 0 interrupts */	apbt_enable_int(APBT_CLOCKEVENT0_NUM); 	sfi_free_mtmr(mtmr);	return 0;} #ifdef CONFIG_SMP static void apbt_setup_irq(struct apbt_dev *adev){	/* timer0 irq has been setup early */	if (adev->irq == 0)		return; 	irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);	irq_set_affinity(adev->irq, cpumask_of(adev->cpu));	/* APB timer irqs are set up as mp_irqs, timer is edge type */	__irq_set_handler(adev->irq, handle_edge_irq, 0, "edge"); 	if (system_state == SYSTEM_BOOTING) {		if (request_irq(adev->irq, apbt_interrupt_handler,					IRQF_TIMER | IRQF_DISABLED |					IRQF_NOBALANCING,					adev->name, adev)) {			printk(KERN_ERR "Failed request IRQ for APBT%d\n",			       adev->num);		}	} else		enable_irq(adev->irq);} /* Should be called with per cpu */void apbt_setup_secondary_clock(void){	struct apbt_dev *adev;	struct clock_event_device *aevt;	int cpu; 	/* Don't register boot CPU clockevent */	cpu = smp_processor_id();	if (!cpu)		return;	/*	 * We need to calculate the scaled math multiplication factor for	 * nanosecond to apbt tick conversion.	 * mult = (nsec/cycle)*2^APBT_SHIFT	 */	printk(KERN_INFO "Init per CPU clockevent %d\n", cpu);	adev = &per_cpu(cpu_apbt_dev, cpu);	aevt = &adev->evt; 	memcpy(aevt, &apbt_clockevent, sizeof(*aevt));	aevt->cpumask = cpumask_of(cpu);	aevt->name = adev->name;	aevt->mode = CLOCK_EVT_MODE_UNUSED; 	printk(KERN_INFO "Registering CPU %d clockevent device %s, mask %08x\n",	       cpu, aevt->name, *(u32 *)aevt->cpumask); 	apbt_setup_irq(adev); 	clockevents_register_device(aevt); 	apbt_enable_int(cpu); 	return;} /* * this notify handler process CPU hotplug events. in case of S0i3, nonboot * cpus are disabled/enabled frequently, for performance reasons, we keep the * per cpu timer irq registered so that we do need to do free_irq/request_irq. * * TODO: it might be more reliable to directly disable percpu clockevent device * without the notifier chain. currently, cpu 0 may get interrupts from other * cpu timers during the offline process due to the ordering of notification. * the extra interrupt is harmless. */static int apbt_cpuhp_notify(struct notifier_block *n,			     unsigned long action, void *hcpu){	unsigned long cpu = (unsigned long)hcpu;	struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu); 	switch (action & 0xf) {	case CPU_DEAD:		disable_irq(adev->irq);		apbt_disable_int(cpu);		if (system_state == SYSTEM_RUNNING) {			pr_debug("skipping APBT CPU %lu offline\n", cpu);		} else if (adev) {			pr_debug("APBT clockevent for cpu %lu offline\n", cpu);			free_irq(adev->irq, adev);		}		break;	default:		pr_debug("APBT notified %lu, no action\n", action);	}	return NOTIFY_OK;} static __init int apbt_late_init(void){	if (mrst_timer_options == MRST_TIMER_LAPIC_APBT ||		!apb_timer_block_enabled)		return 0;	/* This notifier should be called after workqueue is ready */	hotcpu_notifier(apbt_cpuhp_notify, -20);	return 0;}fs_initcall(apbt_late_init);#else void apbt_setup_secondary_clock(void) {} #endif /* CONFIG_SMP */ static void apbt_set_mode(enum clock_event_mode mode,			  struct clock_event_device *evt){	unsigned long ctrl;	uint64_t delta;	int timer_num;	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); 	BUG_ON(!apbt_virt_address); 	timer_num = adev->num;	pr_debug("%s CPU %d timer %d mode=%d\n",		 __func__, first_cpu(*evt->cpumask), timer_num, mode); 	switch (mode) {	case CLOCK_EVT_MODE_PERIODIC:		delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * apbt_clockevent.mult;		delta >>= apbt_clockevent.shift;		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);		ctrl |= APBTMR_CONTROL_MODE_PERIODIC;		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		/*		 * DW APB p. 46, have to disable timer before load counter,		 * may cause sync problem.		 */		ctrl &= ~APBTMR_CONTROL_ENABLE;		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		udelay(1);		pr_debug("Setting clock period %d for HZ %d\n", (int)delta, HZ);		apbt_writel(timer_num, delta, APBTMR_N_LOAD_COUNT);		ctrl |= APBTMR_CONTROL_ENABLE;		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		break;		/* APB timer does not have one-shot mode, use free running mode */	case CLOCK_EVT_MODE_ONESHOT:		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);		/*		 * set free running mode, this mode will let timer reload max		 * timeout which will give time (3min on 25MHz clock) to rearm		 * the next event, therefore emulate the one-shot mode.		 */		ctrl &= ~APBTMR_CONTROL_ENABLE;		ctrl &= ~APBTMR_CONTROL_MODE_PERIODIC; 		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		/* write again to set free running mode */		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL); 		/*		 * DW APB p. 46, load counter with all 1s before starting free		 * running mode.		 */		apbt_writel(timer_num, ~0, APBTMR_N_LOAD_COUNT);		ctrl &= ~APBTMR_CONTROL_INT;		ctrl |= APBTMR_CONTROL_ENABLE;		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		break; 	case CLOCK_EVT_MODE_UNUSED:	case CLOCK_EVT_MODE_SHUTDOWN:		apbt_disable_int(timer_num);		ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);		ctrl &= ~APBTMR_CONTROL_ENABLE;		apbt_writel(timer_num, ctrl, APBTMR_N_CONTROL);		break; 	case CLOCK_EVT_MODE_RESUME:		apbt_enable_int(timer_num);		break;	}} static int apbt_next_event(unsigned long delta,			   struct clock_event_device *evt){	unsigned long ctrl;	int timer_num; 	struct apbt_dev *adev = EVT_TO_APBT_DEV(evt); 	timer_num = adev->num;	/* Disable timer */	ctrl = apbt_readl(timer_num, APBTMR_N_CONTROL);

Lines 1–500 of 701.

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t