/* * Copyright 2011 Tilera Corporation. All Rights Reserved. * *   This program is free software; you can redistribute it and/or *   modify it under the terms of the GNU General Public License *   as published by the Free Software Foundation, version 2. * *   This program is distributed in the hope that it will be useful, but *   WITHOUT ANY WARRANTY; without even the implied warranty of *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or *   NON INFRINGEMENT.  See the GNU General Public License for *   more details. * * copy new kernel into place and then call hv_reexec * */ #include <linux/linkage.h>#include <arch/chip.h>#include <asm/page.h>#include <hv/hypervisor.h> #undef RELOCATE_NEW_KERNEL_VERBOSE STD_ENTRY(relocate_new_kernel) 	move	r30, r0		/* page list */	move	r31, r1		/* address of page we are on */	move	r32, r2		/* start address of new kernel */ 	shrui	r1, r1, PAGE_SHIFT	addi	r1, r1, 1	shli	sp, r1, PAGE_SHIFT	addi	sp, sp, -8	/* we now have a stack (whether we need one or not) */ #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r40, hw2_last(hv_console_putc)	shl16insli r40, r40, hw1(hv_console_putc)	shl16insli r40, r40, hw0(hv_console_putc) 	moveli	r0, 'r'	jalr	r40 	moveli	r0, '_'	jalr	r40 	moveli	r0, 'n'	jalr	r40 	moveli	r0, '_'	jalr	r40 	moveli	r0, 'k'	jalr	r40 	moveli	r0, '\n'	jalr	r40#endif 	/*	 * Throughout this code r30 is pointer to the element of page	 * list we are working on.	 *	 * Normally we get to the next element of the page list by	 * incrementing r30 by eight.  The exception is if the element	 * on the page list is an IND_INDIRECTION in which case we use	 * the element with the low bits masked off as the new value	 * of r30.	 *	 * To get this started, we need the value passed to us (which	 * will always be an IND_INDIRECTION) in memory somewhere with	 * r30 pointing at it.  To do that, we push the value passed	 * to us on the stack and make r30 point to it.	 */ 	st	sp, r30	move	r30, sp	addi	sp, sp, -16 	/*	 * On TILE-GX, we need to flush all tiles' caches, since we may	 * have been doing hash-for-home caching there.  Note that we	 * must do this _after_ we're completely done modifying any memory	 * other than our output buffer (which we know is locally cached).	 * We want the caches to be fully clean when we do the reexec,	 * because the hypervisor is going to do this flush again at that	 * point, and we don't want that second flush to overwrite any memory.	 */	{	 move	r0, zero	 /* cache_pa */	 moveli	r1, hw2_last(HV_FLUSH_EVICT_L2)	}	{	 shl16insli	r1, r1, hw1(HV_FLUSH_EVICT_L2)	 movei	r2, -1		 /* cache_cpumask; -1 means all client tiles */	}	{	 shl16insli	r1, r1, hw0(HV_FLUSH_EVICT_L2)  /* cache_control */	 move	r3, zero	 /* tlb_va */	}	{	 move	r4, zero	 /* tlb_length */	 move	r5, zero	 /* tlb_pgsize */	}	{	 move	r6, zero	 /* tlb_cpumask */	 move	r7, zero	 /* asids */	}	{	 moveli	r20, hw2_last(hv_flush_remote)	 move	r8, zero	 /* asidcount */	}	shl16insli	r20, r20, hw1(hv_flush_remote)	shl16insli	r20, r20, hw0(hv_flush_remote) 	jalr	r20 	/* r33 is destination pointer, default to zero */ 	moveli	r33, 0 .Lloop:	ld	r10, r30 	andi	r9, r10, 0xf	/* low 4 bits tell us what type it is */	xor	r10, r10, r9	/* r10 is now value with low 4 bits stripped */ 	cmpeqi	r0, r9, 0x1	/* IND_DESTINATION */	beqzt	r0, .Ltry2 	move	r33, r10 #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, 'd'	jalr	r40#endif 	addi	r30, r30, 8	j	.Lloop .Ltry2:	cmpeqi	r0, r9, 0x2	/* IND_INDIRECTION */	beqzt	r0, .Ltry4 	move	r30, r10 #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, 'i'	jalr	r40#endif 	j	.Lloop .Ltry4:	cmpeqi	r0, r9, 0x4	/* IND_DONE */	beqzt	r0, .Ltry8 	mf #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, 'D'	jalr	r40	moveli	r0, '\n'	jalr	r40#endif 	move	r0, r32 	moveli	r41, hw2_last(hv_reexec)	shl16insli	r41, r41, hw1(hv_reexec)	shl16insli	r41, r41, hw0(hv_reexec) 	jalr	r41 	/* we should not get here */ #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, '?'	jalr	r40	moveli	r0, '\n'	jalr	r40#endif 	j	.Lhalt .Ltry8:	cmpeqi	r0, r9, 0x8	/* IND_SOURCE */	beqz	r0, .Lerr	/* unknown type */ 	/* copy page at r10 to page at r33 */ 	move	r11, r33 	moveli	r0, hw2_last(PAGE_SIZE)	shl16insli	r0, r0, hw1(PAGE_SIZE)	shl16insli	r0, r0, hw0(PAGE_SIZE)	add	r33, r33, r0 	/* copy word at r10 to word at r11 until r11 equals r33 */ 	/* We know page size must be multiple of 8, so we can unroll	 * 8 times safely without any edge case checking.	 *	 * Issue a flush of the destination every 8 words to avoid	 * incoherence when starting the new kernel.  (Now this is	 * just good paranoia because the hv_reexec call will also	 * take care of this.)	 */ 1:	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0; addi	r11, r11, 8 }	{ ld	r0, r10; addi	r10, r10, 8 }	{ st	r11, r0 }	{ flush r11    ; addi	r11, r11, 8 } 	cmpeq	r0, r33, r11	beqzt	r0, 1b #ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, 's'	jalr	r40#endif 	addi	r30, r30, 8	j	.Lloop  .Lerr:#ifdef RELOCATE_NEW_KERNEL_VERBOSE	moveli	r0, 'e'	jalr	r40	moveli	r0, 'r'	jalr	r40	moveli	r0, 'r'	jalr	r40	moveli	r0, '\n'	jalr	r40#endif.Lhalt:	moveli r41, hw2_last(hv_halt)	shl16insli r41, r41, hw1(hv_halt)	shl16insli r41, r41, hw0(hv_halt) 	jalr	r41	STD_ENDPROC(relocate_new_kernel) 	.section .rodata,"a" 	.globl relocate_new_kernel_sizerelocate_new_kernel_size:	.long .Lend_relocate_new_kernel - relocate_new_kernel