/* * Contiguous Memory Allocator for DMA mapping framework * Copyright (c) 2010-2011 by Samsung Electronics. * Written by: * Marek Szyprowski <m.szyprowski@samsung.com> * Michal Nazarewicz <mina86@mina86.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of the * License or (at your optional) any later version of the license. */ #define pr_fmt(fmt) "cma: " fmt #ifdef CONFIG_CMA_DEBUG#ifndef DEBUG# define DEBUG#endif#endif #include <asm/page.h>#include <asm/dma-contiguous.h> #include <linux/memblock.h>#include <linux/err.h>#include <linux/mm.h>#include <linux/mutex.h>#include <linux/page-isolation.h>#include <linux/sizes.h>#include <linux/slab.h>#include <linux/swap.h>#include <linux/mm_types.h>#include <linux/dma-contiguous.h> struct cma { unsigned long base_pfn; unsigned long count; unsigned long *bitmap;}; struct cma *dma_contiguous_default_area; #ifdef CONFIG_CMA_SIZE_MBYTES#define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES#else#define CMA_SIZE_MBYTES 0#endif /* * Default global CMA area size can be defined in kernel's .config. * This is useful mainly for distro maintainers to create a kernel * that works correctly for most supported systems. * The size can be set in bytes or as a percentage of the total memory * in the system. * * Users, who want to set the size of global CMA area for their system * should use cma= kernel parameter. */static const phys_addr_t size_bytes = CMA_SIZE_MBYTES * SZ_1M;static phys_addr_t size_cmdline = -1; static int __init early_cma(char *p){ pr_debug("%s(%s)\n", __func__, p); size_cmdline = memparse(p, &p); return 0;}early_param("cma", early_cma); #ifdef CONFIG_CMA_SIZE_PERCENTAGE static phys_addr_t __init __maybe_unused cma_early_percent_memory(void){ struct memblock_region *reg; unsigned long total_pages = 0; /* * We cannot use memblock_phys_mem_size() here, because * memblock_analyze() has not been called yet. */ for_each_memblock(memory, reg) total_pages += memblock_region_memory_end_pfn(reg) - memblock_region_memory_base_pfn(reg); return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT;} #else static inline __maybe_unused phys_addr_t cma_early_percent_memory(void){ return 0;} #endif /** * dma_contiguous_reserve() - reserve area(s) for contiguous memory handling * @limit: End address of the reserved memory (optional, 0 for any). * * This function reserves memory from early allocator. It should be * called by arch specific code once the early allocator (memblock or bootmem) * has been activated and all other subsystems have already allocated/reserved * memory. */void __init dma_contiguous_reserve(phys_addr_t limit){ phys_addr_t selected_size = 0; pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit); if (size_cmdline != -1) { selected_size = size_cmdline; } else {#ifdef CONFIG_CMA_SIZE_SEL_MBYTES selected_size = size_bytes;#elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE) selected_size = cma_early_percent_memory();#elif defined(CONFIG_CMA_SIZE_SEL_MIN) selected_size = min(size_bytes, cma_early_percent_memory());#elif defined(CONFIG_CMA_SIZE_SEL_MAX) selected_size = max(size_bytes, cma_early_percent_memory());#endif } if (selected_size && !dma_contiguous_default_area) { pr_debug("%s: reserving %ld MiB for global area\n", __func__, (unsigned long)selected_size / SZ_1M); dma_contiguous_reserve_area(selected_size, 0, limit, &dma_contiguous_default_area); }}; static DEFINE_MUTEX(cma_mutex); static int __init cma_activate_area(struct cma *cma){ int bitmap_size = BITS_TO_LONGS(cma->count) * sizeof(long); unsigned long base_pfn = cma->base_pfn, pfn = base_pfn; unsigned i = cma->count >> pageblock_order; struct zone *zone; cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL); if (!cma->bitmap) return -ENOMEM; WARN_ON_ONCE(!pfn_valid(pfn)); zone = page_zone(pfn_to_page(pfn)); do { unsigned j; base_pfn = pfn; for (j = pageblock_nr_pages; j; --j, pfn++) { WARN_ON_ONCE(!pfn_valid(pfn)); if (page_zone(pfn_to_page(pfn)) != zone) return -EINVAL; } init_cma_reserved_pageblock(pfn_to_page(base_pfn)); } while (--i); return 0;} static struct cma cma_areas[MAX_CMA_AREAS];static unsigned cma_area_count; static int __init cma_init_reserved_areas(void){ int i; for (i = 0; i < cma_area_count; i++) { int ret = cma_activate_area(&cma_areas[i]); if (ret) return ret; } return 0;}core_initcall(cma_init_reserved_areas); /** * dma_contiguous_reserve_area() - reserve custom contiguous area * @size: Size of the reserved area (in bytes), * @base: Base address of the reserved area optional, use 0 for any * @limit: End address of the reserved memory (optional, 0 for any). * @res_cma: Pointer to store the created cma region. * * This function reserves memory from early allocator. It should be * called by arch specific code once the early allocator (memblock or bootmem) * has been activated and all other subsystems have already allocated/reserved * memory. This function allows to create custom reserved areas for specific * devices. */int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base, phys_addr_t limit, struct cma **res_cma){ struct cma *cma = &cma_areas[cma_area_count]; phys_addr_t alignment; int ret = 0; pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__, (unsigned long)size, (unsigned long)base, (unsigned long)limit); /* Sanity checks */ if (cma_area_count == ARRAY_SIZE(cma_areas)) { pr_err("Not enough slots for CMA reserved regions!\n"); return -ENOSPC; } if (!size) return -EINVAL; /* Sanitise input arguments */ alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order); base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); /* Reserve memory */ if (base) { if (memblock_is_region_reserved(base, size) || memblock_reserve(base, size) < 0) { ret = -EBUSY; goto err; } } else { /* * Use __memblock_alloc_base() since * memblock_alloc_base() panic()s. */ phys_addr_t addr = __memblock_alloc_base(size, alignment, limit); if (!addr) { ret = -ENOMEM; goto err; } else { base = addr; } } /* * Each reserved area must be initialised later, when more kernel * subsystems (like slab allocator) are available. */ cma->base_pfn = PFN_DOWN(base); cma->count = size >> PAGE_SHIFT; *res_cma = cma; cma_area_count++; pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, (unsigned long)base); /* Architecture specific contiguous memory fixup. */ dma_contiguous_early_fixup(base, size); return 0;err: pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M); return ret;} /** * dma_alloc_from_contiguous() - allocate pages from contiguous area * @dev: Pointer to device for which the allocation is performed. * @count: Requested number of pages. * @align: Requested alignment of pages (in PAGE_SIZE order). * * This function allocates memory buffer for specified device. It uses * device specific contiguous memory area if available or the default * global one. Requires architecture specific get_dev_cma_area() helper * function. */struct page *dma_alloc_from_contiguous(struct device *dev, int count, unsigned int align){ unsigned long mask, pfn, pageno, start = 0; struct cma *cma = dev_get_cma_area(dev); struct page *page = NULL; int ret; if (!cma || !cma->count) return NULL; if (align > CONFIG_CMA_ALIGNMENT) align = CONFIG_CMA_ALIGNMENT; pr_debug("%s(cma %p, count %d, align %d)\n", __func__, (void *)cma, count, align); if (!count) return NULL; mask = (1 << align) - 1; mutex_lock(&cma_mutex); for (;;) { pageno = bitmap_find_next_zero_area(cma->bitmap, cma->count, start, count, mask); if (pageno >= cma->count) break; pfn = cma->base_pfn + pageno; ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA); if (ret == 0) { bitmap_set(cma->bitmap, pageno, count); page = pfn_to_page(pfn); break; } else if (ret != -EBUSY) { break; } pr_debug("%s(): memory range at %p is busy, retrying\n", __func__, pfn_to_page(pfn)); /* try again with a bit different memory target */ start = pageno + mask + 1; } mutex_unlock(&cma_mutex); pr_debug("%s(): returned %p\n", __func__, page); return page;} /** * dma_release_from_contiguous() - release allocated pages * @dev: Pointer to device for which the pages were allocated. * @pages: Allocated pages. * @count: Number of allocated pages. * * This function releases memory allocated by dma_alloc_from_contiguous(). * It returns false when provided pages do not belong to contiguous area and * true otherwise. */bool dma_release_from_contiguous(struct device *dev, struct page *pages, int count){ struct cma *cma = dev_get_cma_area(dev); unsigned long pfn; if (!cma || !pages) return false; pr_debug("%s(page %p)\n", __func__, (void *)pages); pfn = page_to_pfn(pages); if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count) return false; VM_BUG_ON(pfn + count > cma->base_pfn + cma->count); mutex_lock(&cma_mutex); bitmap_clear(cma->bitmap, pfn - cma->base_pfn, count); free_contig_range(pfn, count); mutex_unlock(&cma_mutex); return true;}
/*
* Contiguous Memory Allocator for DMA mapping framework
* Copyright (c) 2010-2011 by Samsung Electronics.
* Written by:
* Marek Szyprowski <m.szyprowski@samsung.com>
* Michal Nazarewicz <mina86@mina86.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License or (at your optional) any later version of the license.
*/
#define pr_fmt(fmt) "cma: " fmt
#ifdef CONFIG_CMA_DEBUG
#ifndef DEBUG
# define DEBUG
#endif
#endif
#include <asm/page.h>
#include <asm/dma-contiguous.h>
#include <linux/memblock.h>
#include <linux/err.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/page-isolation.h>
#include <linux/sizes.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/mm_types.h>
#include <linux/dma-contiguous.h>
struct cma {
unsigned long base_pfn;
unsigned long count;
unsigned long *bitmap;
};
struct cma *dma_contiguous_default_area;
#ifdef CONFIG_CMA_SIZE_MBYTES
#define CMA_SIZE_MBYTES CONFIG_CMA_SIZE_MBYTES
#else
#define CMA_SIZE_MBYTES 0
#endif
/*
* Default global CMA area size can be defined in kernel's .config.
* This is useful mainly for distro maintainers to create a kernel
* that works correctly for most supported systems.
* The size can be set in bytes or as a percentage of the total memory
* in the system.
*
* Users, who want to set the size of global CMA area for their system
* should use cma= kernel parameter.
*/
static const phys_addr_t size_bytes = CMA_SIZE_MBYTES * SZ_1M;
static phys_addr_t size_cmdline = -1;
static int __init early_cma(char *p)
{
pr_debug("%s(%s)\n", __func__, p);
size_cmdline = memparse(p, &p);
return 0;
}
early_param("cma", early_cma);
#ifdef CONFIG_CMA_SIZE_PERCENTAGE
static phys_addr_t __init __maybe_unused cma_early_percent_memory(void)
{
struct memblock_region *reg;
unsigned long total_pages = 0;
/*
* We cannot use memblock_phys_mem_size() here, because
* memblock_analyze() has not been called yet.
*/
for_each_memblock(memory, reg)
total_pages += memblock_region_memory_end_pfn(reg) -
memblock_region_memory_base_pfn(reg);
return (total_pages * CONFIG_CMA_SIZE_PERCENTAGE / 100) << PAGE_SHIFT;
}
#else
static inline __maybe_unused phys_addr_t cma_early_percent_memory(void)
{
return 0;
}
#endif
/**
* dma_contiguous_reserve() - reserve area(s) for contiguous memory handling
* @limit: End address of the reserved memory (optional, 0 for any).
*
* This function reserves memory from early allocator. It should be
* called by arch specific code once the early allocator (memblock or bootmem)
* has been activated and all other subsystems have already allocated/reserved
* memory.
*/
void __init dma_contiguous_reserve(phys_addr_t limit)
{
phys_addr_t selected_size = 0;
pr_debug("%s(limit %08lx)\n", __func__, (unsigned long)limit);
if (size_cmdline != -1) {
selected_size = size_cmdline;
} else {
#ifdef CONFIG_CMA_SIZE_SEL_MBYTES
selected_size = size_bytes;
#elif defined(CONFIG_CMA_SIZE_SEL_PERCENTAGE)
selected_size = cma_early_percent_memory();
#elif defined(CONFIG_CMA_SIZE_SEL_MIN)
selected_size = min(size_bytes, cma_early_percent_memory());
#elif defined(CONFIG_CMA_SIZE_SEL_MAX)
selected_size = max(size_bytes, cma_early_percent_memory());
#endif
}
if (selected_size && !dma_contiguous_default_area) {
pr_debug("%s: reserving %ld MiB for global area\n", __func__,
(unsigned long)selected_size / SZ_1M);
dma_contiguous_reserve_area(selected_size, 0, limit,
&dma_contiguous_default_area);
}
};
static DEFINE_MUTEX(cma_mutex);
static int __init cma_activate_area(struct cma *cma)
{
int bitmap_size = BITS_TO_LONGS(cma->count) * sizeof(long);
unsigned long base_pfn = cma->base_pfn, pfn = base_pfn;
unsigned i = cma->count >> pageblock_order;
struct zone *zone;
cma->bitmap = kzalloc(bitmap_size, GFP_KERNEL);
if (!cma->bitmap)
return -ENOMEM;
WARN_ON_ONCE(!pfn_valid(pfn));
zone = page_zone(pfn_to_page(pfn));
do {
unsigned j;
base_pfn = pfn;
for (j = pageblock_nr_pages; j; --j, pfn++) {
WARN_ON_ONCE(!pfn_valid(pfn));
if (page_zone(pfn_to_page(pfn)) != zone)
return -EINVAL;
}
init_cma_reserved_pageblock(pfn_to_page(base_pfn));
} while (--i);
return 0;
}
static struct cma cma_areas[MAX_CMA_AREAS];
static unsigned cma_area_count;
static int __init cma_init_reserved_areas(void)
{
int i;
for (i = 0; i < cma_area_count; i++) {
int ret = cma_activate_area(&cma_areas[i]);
if (ret)
return ret;
}
return 0;
}
core_initcall(cma_init_reserved_areas);
/**
* dma_contiguous_reserve_area() - reserve custom contiguous area
* @size: Size of the reserved area (in bytes),
* @base: Base address of the reserved area optional, use 0 for any
* @limit: End address of the reserved memory (optional, 0 for any).
* @res_cma: Pointer to store the created cma region.
*
* This function reserves memory from early allocator. It should be
* called by arch specific code once the early allocator (memblock or bootmem)
* has been activated and all other subsystems have already allocated/reserved
* memory. This function allows to create custom reserved areas for specific
* devices.
*/
int __init dma_contiguous_reserve_area(phys_addr_t size, phys_addr_t base,
phys_addr_t limit, struct cma **res_cma)
{
struct cma *cma = &cma_areas[cma_area_count];
phys_addr_t alignment;
int ret = 0;
pr_debug("%s(size %lx, base %08lx, limit %08lx)\n", __func__,
(unsigned long)size, (unsigned long)base,
(unsigned long)limit);
/* Sanity checks */
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
return -ENOSPC;
}
if (!size)
return -EINVAL;
/* Sanitise input arguments */
alignment = PAGE_SIZE << max(MAX_ORDER - 1, pageblock_order);
base = ALIGN(base, alignment);
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
/* Reserve memory */
if (base) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
/*
* Use __memblock_alloc_base() since
* memblock_alloc_base() panic()s.
*/
phys_addr_t addr = __memblock_alloc_base(size, alignment, limit);
if (!addr) {
ret = -ENOMEM;
goto err;
} else {
base = addr;
}
}
/*
* Each reserved area must be initialised later, when more kernel
* subsystems (like slab allocator) are available.
*/
cma->base_pfn = PFN_DOWN(base);
cma->count = size >> PAGE_SHIFT;
*res_cma = cma;
cma_area_count++;
pr_info("CMA: reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
(unsigned long)base);
/* Architecture specific contiguous memory fixup. */
dma_contiguous_early_fixup(base, size);
return 0;
err:
pr_err("CMA: failed to reserve %ld MiB\n", (unsigned long)size / SZ_1M);
return ret;
}
/**
* dma_alloc_from_contiguous() - allocate pages from contiguous area
* @dev: Pointer to device for which the allocation is performed.
* @count: Requested number of pages.
* @align: Requested alignment of pages (in PAGE_SIZE order).
*
* This function allocates memory buffer for specified device. It uses
* device specific contiguous memory area if available or the default
* global one. Requires architecture specific get_dev_cma_area() helper
* function.
*/
struct page *dma_alloc_from_contiguous(struct device *dev, int count,
unsigned int align)
{
unsigned long mask, pfn, pageno, start = 0;
struct cma *cma = dev_get_cma_area(dev);
struct page *page = NULL;
int ret;
if (!cma || !cma->count)
return NULL;
if (align > CONFIG_CMA_ALIGNMENT)
align = CONFIG_CMA_ALIGNMENT;
pr_debug("%s(cma %p, count %d, align %d)\n", __func__, (void *)cma,
count, align);
if (!count)
return NULL;
mask = (1 << align) - 1;
mutex_lock(&cma_mutex);
for (;;) {
pageno = bitmap_find_next_zero_area(cma->bitmap, cma->count,
start, count, mask);
if (pageno >= cma->count)
break;
pfn = cma->base_pfn + pageno;
ret = alloc_contig_range(pfn, pfn + count, MIGRATE_CMA);
if (ret == 0) {
bitmap_set(cma->bitmap, pageno, count);
page = pfn_to_page(pfn);
break;
} else if (ret != -EBUSY) {
break;
}
pr_debug("%s(): memory range at %p is busy, retrying\n",
__func__, pfn_to_page(pfn));
/* try again with a bit different memory target */
start = pageno + mask + 1;
}
mutex_unlock(&cma_mutex);
pr_debug("%s(): returned %p\n", __func__, page);
return page;
}
/**
* dma_release_from_contiguous() - release allocated pages
* @dev: Pointer to device for which the pages were allocated.
* @pages: Allocated pages.
* @count: Number of allocated pages.
*
* This function releases memory allocated by dma_alloc_from_contiguous().
* It returns false when provided pages do not belong to contiguous area and
* true otherwise.
*/
bool dma_release_from_contiguous(struct device *dev, struct page *pages,
int count)
{
struct cma *cma = dev_get_cma_area(dev);
unsigned long pfn;
if (!cma || !pages)
return false;
pr_debug("%s(page %p)\n", __func__, (void *)pages);
pfn = page_to_pfn(pages);
if (pfn < cma->base_pfn || pfn >= cma->base_pfn + cma->count)
return false;
VM_BUG_ON(pfn + count > cma->base_pfn + cma->count);
mutex_lock(&cma_mutex);
bitmap_clear(cma->bitmap, pfn - cma->base_pfn, count);
free_contig_range(pfn, count);
mutex_unlock(&cma_mutex);
return true;
}