/* *  Copyright (C) 1995-1996  Linus Torvalds & authors (see below) */ /* *  Original authors:	abramov@cecmow.enet.dec.com (Igor Abramov) *			mlord@pobox.com (Mark Lord) * *  See linux/MAINTAINERS for address of current maintainer. * *  This file provides support for the advanced features and bugs *  of IDE interfaces using the CMD Technologies 0640 IDE interface chip. * *  These chips are basically fucked by design, and getting this driver *  to work on every motherboard design that uses this screwed chip seems *  bloody well impossible.  However, we're still trying. * *  Version 0.97 worked for everybody. * *  User feedback is essential.  Many thanks to the beta test team: * *  A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com, *  bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz, *  chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de, *  derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de, *  flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net, *  j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net, *  kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu, *  peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com, *  s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net, *  steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com *  liug@mama.indstate.edu, and others. * *  Version 0.01	Initial version, hacked out of ide.c, *			and #include'd rather than compiled separately. *			This will get cleaned up in a subsequent release. * *  Version 0.02	Fixes for vlb initialization code, enable prefetch *			for versions 'B' and 'C' of chip by default, *			some code cleanup. * *  Version 0.03	Added reset of secondary interface, *			and black list for devices which are not compatible *			with prefetch mode. Separate function for setting *			prefetch is added, possibly it will be called some *			day from ioctl processing code. * *  Version 0.04	Now configs/compiles separate from ide.c * *  Version 0.05	Major rewrite of interface timing code. *			Added new function cmd640_set_mode to set PIO mode *			from ioctl call. New drives added to black list. * *  Version 0.06	More code cleanup. Prefetch is enabled only for *			detected hard drives, not included in prefetch *			black list. * *  Version 0.07	Changed to more conservative drive tuning policy. *			Unknown drives, which report PIO < 4 are set to *			(reported_PIO - 1) if it is supported, or to PIO0. *			List of known drives extended by info provided by *			CMD at their ftp site. * *  Version 0.08	Added autotune/noautotune support. * *  Version 0.09	Try to be smarter about 2nd port enabling. *  Version 0.10	Be nice and don't reset 2nd port. *  Version 0.11	Try to handle more weird situations. * *  Version 0.12	Lots of bug fixes from Laszlo Peter *			irq unmasking disabled for reliability. *			try to be even smarter about the second port. *			tidy up source code formatting. *  Version 0.13	permit irq unmasking again. *  Version 0.90	massive code cleanup, some bugs fixed. *			defaults all drives to PIO mode0, prefetch off. *			autotune is OFF by default, with compile time flag. *			prefetch can be turned OFF/ON using "hdparm -p8/-p9" *			 (requires hdparm-3.1 or newer) *  Version 0.91	first release to linux-kernel list. *  Version 0.92	move initial reg dump to separate callable function *			change "readahead" to "prefetch" to avoid confusion *  Version 0.95	respect original BIOS timings unless autotuning. *			tons of code cleanup and rearrangement. *			added CONFIG_BLK_DEV_CMD640_ENHANCED option *			prevent use of unmask when prefetch is on *  Version 0.96	prevent use of io_32bit when prefetch is off *  Version 0.97	fix VLB secondary interface for sjd@slip.net *			other minor tune-ups:  0.96 was very good. *  Version 0.98	ignore PCI version when disabled by BIOS *  Version 0.99	display setup/active/recovery clocks with PIO mode *  Version 1.00	Mmm.. cannot depend on PCMD_ENA in all systems *  Version 1.01	slow/fast devsel can be selected with "hdparm -p6/-p7" *			 ("fast" is necessary for 32bit I/O in some systems) *  Version 1.02	fix bug that resulted in slow "setup times" *			 (patch courtesy of Zoltan Hidvegi) */ #define CMD640_PREFETCH_MASKS 1 /*#define CMD640_DUMP_REGS */ #include <linux/types.h>#include <linux/kernel.h>#include <linux/delay.h>#include <linux/ide.h>#include <linux/init.h>#include <linux/module.h> #include <asm/io.h> #define DRV_NAME "cmd640" static bool cmd640_vlb; /* * CMD640 specific registers definition. */ #define VID		0x00#define DID		0x02#define PCMD		0x04#define   PCMD_ENA	0x01#define PSTTS		0x06#define REVID		0x08#define PROGIF		0x09#define SUBCL		0x0a#define BASCL		0x0b#define BaseA0		0x10#define BaseA1		0x14#define BaseA2		0x18#define BaseA3		0x1c#define INTLINE		0x3c#define INPINE		0x3d #define	CFR		0x50#define   CFR_DEVREV		0x03#define   CFR_IDE01INTR		0x04#define	  CFR_DEVID		0x18#define	  CFR_AT_VESA_078h	0x20#define	  CFR_DSA1		0x40#define	  CFR_DSA0		0x80 #define CNTRL		0x51#define	  CNTRL_DIS_RA0		0x40#define   CNTRL_DIS_RA1		0x80#define	  CNTRL_ENA_2ND		0x08 #define	CMDTIM		0x52#define	ARTTIM0		0x53#define	DRWTIM0		0x54#define ARTTIM1 	0x55#define DRWTIM1		0x56#define ARTTIM23	0x57#define   ARTTIM23_DIS_RA2	0x04#define   ARTTIM23_DIS_RA3	0x08#define   ARTTIM23_IDE23INTR	0x10#define DRWTIM23	0x58#define BRST		0x59 /* * Registers and masks for easy access by drive index: */static u8 prefetch_regs[4]  = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23}; /* * Current cmd640 timing values for each drive. * The defaults for each are the slowest possible timings. */static u8 setup_counts[4]    = {4, 4, 4, 4};     /* Address setup count (in clocks) */static u8 active_counts[4]   = {16, 16, 16, 16}; /* Active count   (encoded) */static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */ #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ static DEFINE_SPINLOCK(cmd640_lock); /* * Interface to access cmd640x registers */static unsigned int cmd640_key;static void (*__put_cmd640_reg)(u16 reg, u8 val);static u8 (*__get_cmd640_reg)(u16 reg); /* * This is read from the CFR reg, and is used in several places. */static unsigned int cmd640_chip_version; /* * The CMD640x chip does not support DWORD config write cycles, but some * of the BIOSes use them to implement the config services. * Therefore, we must use direct IO instead. */ /* PCI method 1 access */ static void put_cmd640_reg_pci1(u16 reg, u8 val){	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);	outb_p(val, (reg & 3) | 0xcfc);} static u8 get_cmd640_reg_pci1(u16 reg){	outl_p((reg & 0xfc) | cmd640_key, 0xcf8);	return inb_p((reg & 3) | 0xcfc);} /* PCI method 2 access (from CMD datasheet) */ static void put_cmd640_reg_pci2(u16 reg, u8 val){	outb_p(0x10, 0xcf8);	outb_p(val, cmd640_key + reg);	outb_p(0, 0xcf8);} static u8 get_cmd640_reg_pci2(u16 reg){	u8 b; 	outb_p(0x10, 0xcf8);	b = inb_p(cmd640_key + reg);	outb_p(0, 0xcf8);	return b;} /* VLB access */ static void put_cmd640_reg_vlb(u16 reg, u8 val){	outb_p(reg, cmd640_key);	outb_p(val, cmd640_key + 4);} static u8 get_cmd640_reg_vlb(u16 reg){	outb_p(reg, cmd640_key);	return inb_p(cmd640_key + 4);} static u8 get_cmd640_reg(u16 reg){	unsigned long flags;	u8 b; 	spin_lock_irqsave(&cmd640_lock, flags);	b = __get_cmd640_reg(reg);	spin_unlock_irqrestore(&cmd640_lock, flags);	return b;} static void put_cmd640_reg(u16 reg, u8 val){	unsigned long flags; 	spin_lock_irqsave(&cmd640_lock, flags);	__put_cmd640_reg(reg, val);	spin_unlock_irqrestore(&cmd640_lock, flags);} static int __init match_pci_cmd640_device(void){	const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};	unsigned int i;	for (i = 0; i < 4; i++) {		if (get_cmd640_reg(i) != ven_dev[i])			return 0;	}#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT	if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {		printk("ide: cmd640 on PCI disabled by BIOS\n");		return 0;	}#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */	return 1; /* success */} /* * Probe for CMD640x -- pci method 1 */static int __init probe_for_cmd640_pci1(void){	__get_cmd640_reg = get_cmd640_reg_pci1;	__put_cmd640_reg = put_cmd640_reg_pci1;	for (cmd640_key = 0x80000000;	     cmd640_key <= 0x8000f800;	     cmd640_key += 0x800) {		if (match_pci_cmd640_device())			return 1; /* success */	}	return 0;} /* * Probe for CMD640x -- pci method 2 */static int __init probe_for_cmd640_pci2(void){	__get_cmd640_reg = get_cmd640_reg_pci2;	__put_cmd640_reg = put_cmd640_reg_pci2;	for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {		if (match_pci_cmd640_device())			return 1; /* success */	}	return 0;} /* * Probe for CMD640x -- vlb */static int __init probe_for_cmd640_vlb(void){	u8 b; 	__get_cmd640_reg = get_cmd640_reg_vlb;	__put_cmd640_reg = put_cmd640_reg_vlb;	cmd640_key = 0x178;	b = get_cmd640_reg(CFR);	if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {		cmd640_key = 0x78;		b = get_cmd640_reg(CFR);		if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))			return 0;	}	return 1; /* success */} /* *  Returns 1 if an IDE interface/drive exists at 0x170, *  Returns 0 otherwise. */static int __init secondary_port_responding(void){	unsigned long flags; 	spin_lock_irqsave(&cmd640_lock, flags); 	outb_p(0x0a, 0x176);	/* select drive0 */	udelay(100);	if ((inb_p(0x176) & 0x1f) != 0x0a) {		outb_p(0x1a, 0x176); /* select drive1 */		udelay(100);		if ((inb_p(0x176) & 0x1f) != 0x1a) {			spin_unlock_irqrestore(&cmd640_lock, flags);			return 0; /* nothing responded */		}	}	spin_unlock_irqrestore(&cmd640_lock, flags);	return 1; /* success */} #ifdef CMD640_DUMP_REGS/* * Dump out all cmd640 registers.  May be called from ide.c */static void cmd640_dump_regs(void){	unsigned int reg = cmd640_vlb ? 0x50 : 0x00; 	/* Dump current state of chip registers */	printk("ide: cmd640 internal register dump:");	for (; reg <= 0x59; reg++) {		if (!(reg & 0x0f))			printk("\n%04x:", reg);		printk(" %02x", get_cmd640_reg(reg));	}	printk("\n");}#endif static void __set_prefetch_mode(ide_drive_t *drive, int mode){	if (mode) {	/* want prefetch on? */#if CMD640_PREFETCH_MASKS		drive->dev_flags |= IDE_DFLAG_NO_UNMASK;		drive->dev_flags &= ~IDE_DFLAG_UNMASK;#endif		drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;	} else {		drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;		drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;		drive->io_32bit = 0;	}} #ifndef CONFIG_BLK_DEV_CMD640_ENHANCED/* * Check whether prefetch is on for a drive, * and initialize the unmask flags for safe operation. */static void __init check_prefetch(ide_drive_t *drive, unsigned int index){	u8 b = get_cmd640_reg(prefetch_regs[index]); 	__set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);}#else /* * Sets prefetch mode for a drive. */static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode){	unsigned long flags;	int reg = prefetch_regs[index];	u8 b; 	spin_lock_irqsave(&cmd640_lock, flags);	b = __get_cmd640_reg(reg);	__set_prefetch_mode(drive, mode);	if (mode)		b &= ~prefetch_masks[index];	/* enable prefetch */	else		b |= prefetch_masks[index];	/* disable prefetch */	__put_cmd640_reg(reg, b);	spin_unlock_irqrestore(&cmd640_lock, flags);} /* * Dump out current drive clocks settings */static void display_clocks(unsigned int index){	u8 active_count, recovery_count; 	active_count = active_counts[index];	if (active_count == 1)		++active_count;	recovery_count = recovery_counts[index];	if (active_count > 3 && recovery_count == 1)		++recovery_count;	if (cmd640_chip_version > 1)		recovery_count += 1;  /* cmd640b uses (count + 1)*/	printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);} /* * Pack active and recovery counts into single byte representation * used by controller */static inline u8 pack_nibbles(u8 upper, u8 lower){	return ((upper & 0x0f) << 4) | (lower & 0x0f);} /* * This routine writes the prepared setup/active/recovery counts * for a drive into the cmd640 chipset registers to active them. */static void program_drive_counts(ide_drive_t *drive, unsigned int index){	unsigned long flags;	u8 setup_count    = setup_counts[index];	u8 active_count   = active_counts[index];	u8 recovery_count = recovery_counts[index]; 	/*	 * Set up address setup count and drive read/write timing registers.	 * Primary interface has individual count/timing registers for	 * each drive.  Secondary interface has one common set of registers,	 * so we merge the timings, using the slowest value for each timing.	 */	if (index > 1) {		ide_drive_t *peer = ide_get_pair_dev(drive);		unsigned int mate = index ^ 1; 		if (peer) {			if (setup_count < setup_counts[mate])				setup_count = setup_counts[mate];			if (active_count < active_counts[mate])				active_count = active_counts[mate];			if (recovery_count < recovery_counts[mate])				recovery_count = recovery_counts[mate];		}	} 	/*	 * Convert setup_count to internal chipset representation	 */	switch (setup_count) {	case 4:	 setup_count = 0x00; break;	case 3:	 setup_count = 0x80; break;	case 1:	case 2:	 setup_count = 0x40; break;	default: setup_count = 0xc0; /* case 5 */	} 	/*	 * Now that everything is ready, program the new timings	 */	spin_lock_irqsave(&cmd640_lock, flags);	/*

Lines 1–500 of 847. Load more