223 lines · 5.8 KB · C
RawDownload
#ifndef _ASM_GENERIC_GPIO_H#define _ASM_GENERIC_GPIO_H #include <linux/kernel.h>#include <linux/types.h>#include <linux/errno.h>#include <linux/of.h>#include <linux/pinctrl/pinctrl.h> #ifdef CONFIG_GPIOLIB #include <linux/compiler.h>#include <linux/gpio/driver.h>#include <linux/gpio/consumer.h> /* Platforms may implement their GPIO interface with library code, * at a small performance cost for non-inlined operations and some * extra memory (for code and for per-GPIO table entries). * * While the GPIO programming interface defines valid GPIO numbers * to be in the range 0..MAX_INT, this library restricts them to the * smaller range 0..ARCH_NR_GPIOS-1. * * ARCH_NR_GPIOS is somewhat arbitrary; it usually reflects the sum of * builtin/SoC GPIOs plus a number of GPIOs on expanders; the latter is * actually an estimate of a board-specific value. */ #ifndef ARCH_NR_GPIOS#define ARCH_NR_GPIOS		256#endif /* * "valid" GPIO numbers are nonnegative and may be passed to * setup routines like gpio_request().  only some valid numbers * can successfully be requested and used. * * Invalid GPIO numbers are useful for indicating no-such-GPIO in * platform data and other tables. */ static inline bool gpio_is_valid(int number){	return number >= 0 && number < ARCH_NR_GPIOS;} struct device;struct gpio;struct seq_file;struct module;struct device_node;struct gpio_desc; /* caller holds gpio_lock *OR* gpio is marked as requested */static inline struct gpio_chip *gpio_to_chip(unsigned gpio){	return gpiod_to_chip(gpio_to_desc(gpio));} /* Always use the library code for GPIO management calls, * or when sleeping may be involved. */extern int gpio_request(unsigned gpio, const char *label);extern void gpio_free(unsigned gpio); static inline int gpio_direction_input(unsigned gpio){	return gpiod_direction_input(gpio_to_desc(gpio));}static inline int gpio_direction_output(unsigned gpio, int value){	return gpiod_direction_output(gpio_to_desc(gpio), value);} static inline int gpio_set_debounce(unsigned gpio, unsigned debounce){	return gpiod_set_debounce(gpio_to_desc(gpio), debounce);} static inline int gpio_get_value_cansleep(unsigned gpio){	return gpiod_get_raw_value_cansleep(gpio_to_desc(gpio));}static inline void gpio_set_value_cansleep(unsigned gpio, int value){	return gpiod_set_raw_value_cansleep(gpio_to_desc(gpio), value);}  /* A platform's <asm/gpio.h> code may want to inline the I/O calls when * the GPIO is constant and refers to some always-present controller, * giving direct access to chip registers and tight bitbanging loops. */static inline int __gpio_get_value(unsigned gpio){	return gpiod_get_raw_value(gpio_to_desc(gpio));}static inline void __gpio_set_value(unsigned gpio, int value){	return gpiod_set_raw_value(gpio_to_desc(gpio), value);} static inline int __gpio_cansleep(unsigned gpio){	return gpiod_cansleep(gpio_to_desc(gpio));} static inline int __gpio_to_irq(unsigned gpio){	return gpiod_to_irq(gpio_to_desc(gpio));} extern int gpio_lock_as_irq(struct gpio_chip *chip, unsigned int offset);extern void gpio_unlock_as_irq(struct gpio_chip *chip, unsigned int offset); extern int gpio_request_one(unsigned gpio, unsigned long flags, const char *label);extern int gpio_request_array(const struct gpio *array, size_t num);extern void gpio_free_array(const struct gpio *array, size_t num); /* * A sysfs interface can be exported by individual drivers if they want, * but more typically is configured entirely from userspace. */static inline int gpio_export(unsigned gpio, bool direction_may_change){	return gpiod_export(gpio_to_desc(gpio), direction_may_change);} static inline int gpio_export_link(struct device *dev, const char *name,				   unsigned gpio){	return gpiod_export_link(dev, name, gpio_to_desc(gpio));} static inline int gpio_sysfs_set_active_low(unsigned gpio, int value){	return gpiod_sysfs_set_active_low(gpio_to_desc(gpio), value);} static inline void gpio_unexport(unsigned gpio){	gpiod_unexport(gpio_to_desc(gpio));} #ifdef CONFIG_PINCTRL /** * struct gpio_pin_range - pin range controlled by a gpio chip * @head: list for maintaining set of pin ranges, used internally * @pctldev: pinctrl device which handles corresponding pins * @range: actual range of pins controlled by a gpio controller */ struct gpio_pin_range {	struct list_head node;	struct pinctrl_dev *pctldev;	struct pinctrl_gpio_range range;}; int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,			   unsigned int gpio_offset, unsigned int pin_offset,			   unsigned int npins);int gpiochip_add_pingroup_range(struct gpio_chip *chip,			struct pinctrl_dev *pctldev,			unsigned int gpio_offset, const char *pin_group);void gpiochip_remove_pin_ranges(struct gpio_chip *chip); #else static inline intgpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,		       unsigned int gpio_offset, unsigned int pin_offset,		       unsigned int npins){	return 0;}static inline intgpiochip_add_pingroup_range(struct gpio_chip *chip,			struct pinctrl_dev *pctldev,			unsigned int gpio_offset, const char *pin_group){	return 0;} static inline voidgpiochip_remove_pin_ranges(struct gpio_chip *chip){} #endif /* CONFIG_PINCTRL */ #else	/* !CONFIG_GPIOLIB */ static inline bool gpio_is_valid(int number){	/* only non-negative numbers are valid */	return number >= 0;} /* platforms that don't directly support access to GPIOs through I2C, SPI, * or other blocking infrastructure can use these wrappers. */ static inline int gpio_cansleep(unsigned gpio){	return 0;} static inline int gpio_get_value_cansleep(unsigned gpio){	might_sleep();	return __gpio_get_value(gpio);} static inline void gpio_set_value_cansleep(unsigned gpio, int value){	might_sleep();	__gpio_set_value(gpio, value);} #endif /* !CONFIG_GPIOLIB */ #endif /* _ASM_GENERIC_GPIO_H */

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t