/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Global definitions for the INET interface module. * * Version: @(#)if.h 1.0.2 04/18/93 * * Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988 * Ross Biro * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */#ifndef _LINUX_IF_H#define _LINUX_IF_H#include <linux/types.h> /* for "__kernel_caddr_t" et al */#include <linux/socket.h> /* for "struct sockaddr" et al */#include <linux/compiler.h> /* for "__user" et al */#define IFNAMSIZ 16#define IFALIASZ 256#include <linux/hdlc/ioctl.h>/* Standard interface flags (netdevice->flags). */#define IFF_UP 0x1 /* interface is up */#define IFF_BROADCAST 0x2 /* broadcast address valid */#define IFF_DEBUG 0x4 /* turn on debugging */#define IFF_LOOPBACK 0x8 /* is a loopback net */#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */#define IFF_NOARP 0x80 /* no ARP protocol */#define IFF_PROMISC 0x100 /* receive all packets */#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/#define IFF_MASTER 0x400 /* master of a load balancer */#define IFF_SLAVE 0x800 /* slave of a load balancer */#define IFF_MULTICAST 0x1000 /* Supports multicast */#define IFF_PORTSEL 0x2000 /* can set media type */#define IFF_AUTOMEDIA 0x4000 /* auto media select active */#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */#define IFF_DORMANT 0x20000 /* driver signals dormant */#define IFF_ECHO 0x40000 /* echo sent packets */#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\ IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)/* Private (from user) interface flags (netdevice->priv_flags). */#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */#define IFF_BONDING 0x20 /* bonding master or slave */#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to * release skb->dst */#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch * datapath port */#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing * skbs on transmit */#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */#define IFF_TEAM_PORT 0x40000 /* device used as team port */#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address * change when it's running */#define IFF_MACVLAN 0x200000 /* Macvlan device */#define IF_GET_IFACE 0x0001 /* for querying only */#define IF_GET_PROTO 0x0002/* For definitions see hdlc.h */#define IF_IFACE_V35 0x1000 /* V.35 serial interface */#define IF_IFACE_V24 0x1001 /* V.24 serial interface */#define IF_IFACE_X21 0x1002 /* X.21 serial interface */#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) *//* For definitions see hdlc.h */#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */#define IF_PROTO_PPP 0x2001 /* PPP protocol */#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */#define IF_PROTO_X25 0x2006 /* X.25 */#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */#define IF_PROTO_FR_ETH_PVC 0x200B#define IF_PROTO_RAW 0x200C /* RAW Socket *//* RFC 2863 operational status */enum { IF_OPER_UNKNOWN, IF_OPER_NOTPRESENT, IF_OPER_DOWN, IF_OPER_LOWERLAYERDOWN, IF_OPER_TESTING, IF_OPER_DORMANT, IF_OPER_UP,};/* link modes */enum { IF_LINK_MODE_DEFAULT, IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */};/* * Device mapping structure. I'd just gone off and designed a * beautiful scheme using only loadable modules with arguments * for driver options and along come the PCMCIA people 8) * * Ah well. The get() side of this is good for WDSETUP, and it'll * be handy for debugging things. The set side is fine for now and * being very small might be worth keeping for clean configuration. */struct ifmap { unsigned long mem_start; unsigned long mem_end; unsigned short base_addr; unsigned char irq; unsigned char dma; unsigned char port; /* 3 bytes spare */};struct if_settings { unsigned int type; /* Type of physical device or protocol */ unsigned int size; /* Size of the data allocated by the caller */ union { /* {atm/eth/dsl}_settings anyone ? */ raw_hdlc_proto __user *raw_hdlc; cisco_proto __user *cisco; fr_proto __user *fr; fr_proto_pvc __user *fr_pvc; fr_proto_pvc_info __user *fr_pvc_info; /* interface settings */ sync_serial_settings __user *sync; te1_settings __user *te1; } ifs_ifsu;};/* * Interface request structure used for socket * ioctl's. All interface ioctl's must have parameter * definitions which begin with ifr_name. The * remainder may be interface specific. */struct ifreq {#define IFHWADDRLEN 6 union { char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */ } ifr_ifrn; union { struct sockaddr ifru_addr; struct sockaddr ifru_dstaddr; struct sockaddr ifru_broadaddr; struct sockaddr ifru_netmask; struct sockaddr ifru_hwaddr; short ifru_flags; int ifru_ivalue; int ifru_mtu; struct ifmap ifru_map; char ifru_slave[IFNAMSIZ]; /* Just fits the size */ char ifru_newname[IFNAMSIZ]; void __user * ifru_data; struct if_settings ifru_settings; } ifr_ifru;};#define ifr_name ifr_ifrn.ifrn_name /* interface name */#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */#define ifr_addr ifr_ifru.ifru_addr /* address */#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */#define ifr_flags ifr_ifru.ifru_flags /* flags */#define ifr_metric ifr_ifru.ifru_ivalue /* metric */#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */#define ifr_map ifr_ifru.ifru_map /* device map */#define ifr_slave ifr_ifru.ifru_slave /* slave device */#define ifr_data ifr_ifru.ifru_data /* for use by interface */#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */#define ifr_newname ifr_ifru.ifru_newname /* New name */#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*//* * Structure used in SIOCGIFCONF request. * Used to retrieve interface configuration * for machine (useful for programs which * must know all networks accessible). */struct ifconf { int ifc_len; /* size of buffer */ union { char __user *ifcu_buf; struct ifreq __user *ifcu_req; } ifc_ifcu;};#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */#define ifc_req ifc_ifcu.ifcu_req /* array of structures */#endif /* _LINUX_IF_H */
/*
* INET An implementation of the TCP/IP protocol suite for the LINUX
* operating system. INET is implemented using the BSD Socket
* interface as the means of communication with the user level.
*
* Global definitions for the INET interface module.
*
* Version: @(#)if.h 1.0.2 04/18/93
*
* Authors: Original taken from Berkeley UNIX 4.3, (c) UCB 1982-1988
* Ross Biro
* Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _LINUX_IF_H
#define _LINUX_IF_H
#include <linux/types.h> /* for "__kernel_caddr_t" et al */
#include <linux/socket.h> /* for "struct sockaddr" et al */
#include <linux/compiler.h> /* for "__user" et al */
#define IFNAMSIZ 16
#define IFALIASZ 256
#include <linux/hdlc/ioctl.h>
/* Standard interface flags (netdevice->flags). */
#define IFF_UP 0x1 /* interface is up */
#define IFF_BROADCAST 0x2 /* broadcast address valid */
#define IFF_DEBUG 0x4 /* turn on debugging */
#define IFF_LOOPBACK 0x8 /* is a loopback net */
#define IFF_POINTOPOINT 0x10 /* interface is has p-p link */
#define IFF_NOTRAILERS 0x20 /* avoid use of trailers */
#define IFF_RUNNING 0x40 /* interface RFC2863 OPER_UP */
#define IFF_NOARP 0x80 /* no ARP protocol */
#define IFF_PROMISC 0x100 /* receive all packets */
#define IFF_ALLMULTI 0x200 /* receive all multicast packets*/
#define IFF_MASTER 0x400 /* master of a load balancer */
#define IFF_SLAVE 0x800 /* slave of a load balancer */
#define IFF_MULTICAST 0x1000 /* Supports multicast */
#define IFF_PORTSEL 0x2000 /* can set media type */
#define IFF_AUTOMEDIA 0x4000 /* auto media select active */
#define IFF_DYNAMIC 0x8000 /* dialup device with changing addresses*/
#define IFF_LOWER_UP 0x10000 /* driver signals L1 up */
#define IFF_DORMANT 0x20000 /* driver signals dormant */
#define IFF_ECHO 0x40000 /* echo sent packets */
#define IFF_VOLATILE (IFF_LOOPBACK|IFF_POINTOPOINT|IFF_BROADCAST|IFF_ECHO|\
IFF_MASTER|IFF_SLAVE|IFF_RUNNING|IFF_LOWER_UP|IFF_DORMANT)
/* Private (from user) interface flags (netdevice->priv_flags). */
#define IFF_802_1Q_VLAN 0x1 /* 802.1Q VLAN device. */
#define IFF_EBRIDGE 0x2 /* Ethernet bridging device. */
#define IFF_SLAVE_INACTIVE 0x4 /* bonding slave not the curr. active */
#define IFF_MASTER_8023AD 0x8 /* bonding master, 802.3ad. */
#define IFF_MASTER_ALB 0x10 /* bonding master, balance-alb. */
#define IFF_BONDING 0x20 /* bonding master or slave */
#define IFF_SLAVE_NEEDARP 0x40 /* need ARPs for validation */
#define IFF_ISATAP 0x80 /* ISATAP interface (RFC4214) */
#define IFF_MASTER_ARPMON 0x100 /* bonding master, ARP mon in use */
#define IFF_WAN_HDLC 0x200 /* WAN HDLC device */
#define IFF_XMIT_DST_RELEASE 0x400 /* dev_hard_start_xmit() is allowed to
* release skb->dst
*/
#define IFF_DONT_BRIDGE 0x800 /* disallow bridging this ether dev */
#define IFF_DISABLE_NETPOLL 0x1000 /* disable netpoll at run-time */
#define IFF_MACVLAN_PORT 0x2000 /* device used as macvlan port */
#define IFF_BRIDGE_PORT 0x4000 /* device used as bridge port */
#define IFF_OVS_DATAPATH 0x8000 /* device used as Open vSwitch
* datapath port */
#define IFF_TX_SKB_SHARING 0x10000 /* The interface supports sharing
* skbs on transmit */
#define IFF_UNICAST_FLT 0x20000 /* Supports unicast filtering */
#define IFF_TEAM_PORT 0x40000 /* device used as team port */
#define IFF_SUPP_NOFCS 0x80000 /* device supports sending custom FCS */
#define IFF_LIVE_ADDR_CHANGE 0x100000 /* device supports hardware address
* change when it's running */
#define IFF_MACVLAN 0x200000 /* Macvlan device */
#define IF_GET_IFACE 0x0001 /* for querying only */
#define IF_GET_PROTO 0x0002
/* For definitions see hdlc.h */
#define IF_IFACE_V35 0x1000 /* V.35 serial interface */
#define IF_IFACE_V24 0x1001 /* V.24 serial interface */
#define IF_IFACE_X21 0x1002 /* X.21 serial interface */
#define IF_IFACE_T1 0x1003 /* T1 telco serial interface */
#define IF_IFACE_E1 0x1004 /* E1 telco serial interface */
#define IF_IFACE_SYNC_SERIAL 0x1005 /* can't be set by software */
#define IF_IFACE_X21D 0x1006 /* X.21 Dual Clocking (FarSite) */
/* For definitions see hdlc.h */
#define IF_PROTO_HDLC 0x2000 /* raw HDLC protocol */
#define IF_PROTO_PPP 0x2001 /* PPP protocol */
#define IF_PROTO_CISCO 0x2002 /* Cisco HDLC protocol */
#define IF_PROTO_FR 0x2003 /* Frame Relay protocol */
#define IF_PROTO_FR_ADD_PVC 0x2004 /* Create FR PVC */
#define IF_PROTO_FR_DEL_PVC 0x2005 /* Delete FR PVC */
#define IF_PROTO_X25 0x2006 /* X.25 */
#define IF_PROTO_HDLC_ETH 0x2007 /* raw HDLC, Ethernet emulation */
#define IF_PROTO_FR_ADD_ETH_PVC 0x2008 /* Create FR Ethernet-bridged PVC */
#define IF_PROTO_FR_DEL_ETH_PVC 0x2009 /* Delete FR Ethernet-bridged PVC */
#define IF_PROTO_FR_PVC 0x200A /* for reading PVC status */
#define IF_PROTO_FR_ETH_PVC 0x200B
#define IF_PROTO_RAW 0x200C /* RAW Socket */
/* RFC 2863 operational status */
enum {
IF_OPER_UNKNOWN,
IF_OPER_NOTPRESENT,
IF_OPER_DOWN,
IF_OPER_LOWERLAYERDOWN,
IF_OPER_TESTING,
IF_OPER_DORMANT,
IF_OPER_UP,
};
/* link modes */
enum {
IF_LINK_MODE_DEFAULT,
IF_LINK_MODE_DORMANT, /* limit upward transition to dormant */
};
/*
* Device mapping structure. I'd just gone off and designed a
* beautiful scheme using only loadable modules with arguments
* for driver options and along come the PCMCIA people 8)
*
* Ah well. The get() side of this is good for WDSETUP, and it'll
* be handy for debugging things. The set side is fine for now and
* being very small might be worth keeping for clean configuration.
*/
struct ifmap {
unsigned long mem_start;
unsigned long mem_end;
unsigned short base_addr;
unsigned char irq;
unsigned char dma;
unsigned char port;
/* 3 bytes spare */
};
struct if_settings {
unsigned int type; /* Type of physical device or protocol */
unsigned int size; /* Size of the data allocated by the caller */
union {
/* {atm/eth/dsl}_settings anyone ? */
raw_hdlc_proto __user *raw_hdlc;
cisco_proto __user *cisco;
fr_proto __user *fr;
fr_proto_pvc __user *fr_pvc;
fr_proto_pvc_info __user *fr_pvc_info;
/* interface settings */
sync_serial_settings __user *sync;
te1_settings __user *te1;
} ifs_ifsu;
};
/*
* Interface request structure used for socket
* ioctl's. All interface ioctl's must have parameter
* definitions which begin with ifr_name. The
* remainder may be interface specific.
*/
struct ifreq {
#define IFHWADDRLEN 6
union
{
char ifrn_name[IFNAMSIZ]; /* if name, e.g. "en0" */
} ifr_ifrn;
union {
struct sockaddr ifru_addr;
struct sockaddr ifru_dstaddr;
struct sockaddr ifru_broadaddr;
struct sockaddr ifru_netmask;
struct sockaddr ifru_hwaddr;
short ifru_flags;
int ifru_ivalue;
int ifru_mtu;
struct ifmap ifru_map;
char ifru_slave[IFNAMSIZ]; /* Just fits the size */
char ifru_newname[IFNAMSIZ];
void __user * ifru_data;
struct if_settings ifru_settings;
} ifr_ifru;
};
#define ifr_name ifr_ifrn.ifrn_name /* interface name */
#define ifr_hwaddr ifr_ifru.ifru_hwaddr /* MAC address */
#define ifr_addr ifr_ifru.ifru_addr /* address */
#define ifr_dstaddr ifr_ifru.ifru_dstaddr /* other end of p-p lnk */
#define ifr_broadaddr ifr_ifru.ifru_broadaddr /* broadcast address */
#define ifr_netmask ifr_ifru.ifru_netmask /* interface net mask */
#define ifr_flags ifr_ifru.ifru_flags /* flags */
#define ifr_metric ifr_ifru.ifru_ivalue /* metric */
#define ifr_mtu ifr_ifru.ifru_mtu /* mtu */
#define ifr_map ifr_ifru.ifru_map /* device map */
#define ifr_slave ifr_ifru.ifru_slave /* slave device */
#define ifr_data ifr_ifru.ifru_data /* for use by interface */
#define ifr_ifindex ifr_ifru.ifru_ivalue /* interface index */
#define ifr_bandwidth ifr_ifru.ifru_ivalue /* link bandwidth */
#define ifr_qlen ifr_ifru.ifru_ivalue /* Queue length */
#define ifr_newname ifr_ifru.ifru_newname /* New name */
#define ifr_settings ifr_ifru.ifru_settings /* Device/proto settings*/
/*
* Structure used in SIOCGIFCONF request.
* Used to retrieve interface configuration
* for machine (useful for programs which
* must know all networks accessible).
*/
struct ifconf {
int ifc_len; /* size of buffer */
union {
char __user *ifcu_buf;
struct ifreq __user *ifcu_req;
} ifc_ifcu;
};
#define ifc_buf ifc_ifcu.ifcu_buf /* buffer address */
#define ifc_req ifc_ifcu.ifcu_req /* array of structures */
#endif /* _LINUX_IF_H */