/* *  arch/arm/include/asm/assembler.h * *  Copyright (C) 1996-2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * *  This file contains arm architecture specific defines *  for the different processors. * *  Do not include any C declarations in this file - it is included by *  assembler source. */#ifndef __ASM_ASSEMBLER_H__#define __ASM_ASSEMBLER_H__ #ifndef __ASSEMBLY__#error "Only include this from assembly code"#endif #include <asm/ptrace.h>#include <asm/domain.h> /* * Endian independent macros for shifting bytes within registers. */#ifndef __ARMEB__#define pull            lsr#define push            lsl#define get_byte_0      lsl #0#define get_byte_1	lsr #8#define get_byte_2	lsr #16#define get_byte_3	lsr #24#define put_byte_0      lsl #0#define put_byte_1	lsl #8#define put_byte_2	lsl #16#define put_byte_3	lsl #24#else#define pull            lsl#define push            lsr#define get_byte_0	lsr #24#define get_byte_1	lsr #16#define get_byte_2	lsr #8#define get_byte_3      lsl #0#define put_byte_0	lsl #24#define put_byte_1	lsl #16#define put_byte_2	lsl #8#define put_byte_3      lsl #0#endif /* * Data preload for architectures that support it */#if __LINUX_ARM_ARCH__ >= 5#define PLD(code...)	code#else#define PLD(code...)#endif /* * This can be used to enable code to cacheline align the destination * pointer when bulk writing to memory.  Experiments on StrongARM and * XScale didn't show this a worthwhile thing to do when the cache is not * set to write-allocate (this would need further testing on XScale when WA * is used). * * On Feroceon there is much to gain however, regardless of cache mode. */#ifdef CONFIG_CPU_FEROCEON#define CALGN(code...) code#else#define CALGN(code...)#endif /* * Enable and disable interrupts */#if __LINUX_ARM_ARCH__ >= 6	.macro	disable_irq_notrace	cpsid	i	.endm 	.macro	enable_irq_notrace	cpsie	i	.endm#else	.macro	disable_irq_notrace	msr	cpsr_c, #PSR_I_BIT | SVC_MODE	.endm 	.macro	enable_irq_notrace	msr	cpsr_c, #SVC_MODE	.endm#endif 	.macro asm_trace_hardirqs_off#if defined(CONFIG_TRACE_IRQFLAGS)	stmdb   sp!, {r0-r3, ip, lr}	bl	trace_hardirqs_off	ldmia	sp!, {r0-r3, ip, lr}#endif	.endm 	.macro asm_trace_hardirqs_on_cond, cond#if defined(CONFIG_TRACE_IRQFLAGS)	/*	 * actually the registers should be pushed and pop'd conditionally, but	 * after bl the flags are certainly clobbered	 */	stmdb   sp!, {r0-r3, ip, lr}	bl\cond	trace_hardirqs_on	ldmia	sp!, {r0-r3, ip, lr}#endif	.endm 	.macro asm_trace_hardirqs_on	asm_trace_hardirqs_on_cond al	.endm 	.macro disable_irq	disable_irq_notrace	asm_trace_hardirqs_off	.endm 	.macro enable_irq	asm_trace_hardirqs_on	enable_irq_notrace	.endm/* * Save the current IRQ state and disable IRQs.  Note that this macro * assumes FIQs are enabled, and that the processor is in SVC mode. */	.macro	save_and_disable_irqs, oldcpsr	mrs	\oldcpsr, cpsr	disable_irq	.endm /* * Restore interrupt state previously stored in a register.  We don't * guarantee that this will preserve the flags. */	.macro	restore_irqs_notrace, oldcpsr	msr	cpsr_c, \oldcpsr	.endm 	.macro restore_irqs, oldcpsr	tst	\oldcpsr, #PSR_I_BIT	asm_trace_hardirqs_on_cond eq	restore_irqs_notrace \oldcpsr	.endm #define USER(x...)				\9999:	x;					\	.pushsection __ex_table,"a";		\	.align	3;				\	.long	9999b,9001f;			\	.popsection #ifdef CONFIG_SMP#define ALT_SMP(instr...)					\9998:	instr/* * Note: if you get assembler errors from ALT_UP() when building with * CONFIG_THUMB2_KERNEL, you almost certainly need to use * ALT_SMP( W(instr) ... ) */#define ALT_UP(instr...)					\	.pushsection ".alt.smp.init", "a"			;\	.long	9998b						;\9997:	instr							;\	.if . - 9997b != 4					;\		.error "ALT_UP() content must assemble to exactly 4 bytes";\	.endif							;\	.popsection#define ALT_UP_B(label)					\	.equ	up_b_offset, label - 9998b			;\	.pushsection ".alt.smp.init", "a"			;\	.long	9998b						;\	W(b)	. + up_b_offset					;\	.popsection#else#define ALT_SMP(instr...)#define ALT_UP(instr...) instr#define ALT_UP_B(label) b label#endif /* * SMP data memory barrier */	.macro	smp_dmb mode#ifdef CONFIG_SMP#if __LINUX_ARM_ARCH__ >= 7	.ifeqs "\mode","arm"	ALT_SMP(dmb)	.else	ALT_SMP(W(dmb))	.endif#elif __LINUX_ARM_ARCH__ == 6	ALT_SMP(mcr	p15, 0, r0, c7, c10, 5)	@ dmb#else#error Incompatible SMP platform#endif	.ifeqs "\mode","arm"	ALT_UP(nop)	.else	ALT_UP(W(nop))	.endif#endif	.endm #ifdef CONFIG_THUMB2_KERNEL	.macro	setmode, mode, reg	mov	\reg, #\mode	msr	cpsr_c, \reg	.endm#else	.macro	setmode, mode, reg	msr	cpsr_c, #\mode	.endm#endif /* * STRT/LDRT access macros with ARM and Thumb-2 variants */#ifdef CONFIG_THUMB2_KERNEL 	.macro	usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()9999:	.if	\inc == 1	\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]	.elseif	\inc == 4	\instr\cond\()\t\().w \reg, [\ptr, #\off]	.else	.error	"Unsupported inc macro argument"	.endif 	.pushsection __ex_table,"a"	.align	3	.long	9999b, \abort	.popsection	.endm 	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort	@ explicit IT instruction needed because of the label	@ introduced by the USER macro	.ifnc	\cond,al	.if	\rept == 1	itt	\cond	.elseif	\rept == 2	ittt	\cond	.else	.error	"Unsupported rept macro argument"	.endif	.endif 	@ Slightly optimised to avoid incrementing the pointer twice	usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort	.if	\rept == 2	usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort	.endif 	add\cond \ptr, #\rept * \inc	.endm #else	/* !CONFIG_THUMB2_KERNEL */ 	.macro	usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()	.rept	\rept9999:	.if	\inc == 1	\instr\cond\()b\()\t \reg, [\ptr], #\inc	.elseif	\inc == 4	\instr\cond\()\t \reg, [\ptr], #\inc	.else	.error	"Unsupported inc macro argument"	.endif 	.pushsection __ex_table,"a"	.align	3	.long	9999b, \abort	.popsection	.endr	.endm #endif	/* CONFIG_THUMB2_KERNEL */ 	.macro	strusr, reg, ptr, inc, cond=al, rept=1, abort=9001f	usracc	str, \reg, \ptr, \inc, \cond, \rept, \abort	.endm 	.macro	ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f	usracc	ldr, \reg, \ptr, \inc, \cond, \rept, \abort	.endm /* Utility macro for declaring string literals */	.macro	string name:req, string	.type \name , #object\name:	.asciz "\string"	.size \name , . - \name	.endm #endif /* __ASM_ASSEMBLER_H__ */