## Input misc drivers configuration#menuconfig INPUT_MISC	bool "Miscellaneous devices"	help	  Say Y here, and a list of miscellaneous input drivers will be displayed.	  Everything that didn't fit into the other categories is here. This option	  doesn't affect the kernel. 	  If unsure, say Y. if INPUT_MISC config INPUT_88PM860X_ONKEY	tristate "88PM860x ONKEY support"	depends on MFD_88PM860X	help	  Support the ONKEY of Marvell 88PM860x PMICs as an input device	  reporting power button status. 	  To compile this driver as a module, choose M here: the module	  will be called 88pm860x_onkey. config INPUT_AB8500_PONKEY	tristate "AB8500 Pon (PowerOn) Key"	depends on AB8500_CORE	help	  Say Y here to use the PowerOn Key for ST-Ericsson's AB8500	  Mix-Sig PMIC. 	  To compile this driver as a module, choose M here: the module	  will be called ab8500-ponkey. config INPUT_AD714X	tristate "Analog Devices AD714x Capacitance Touch Sensor"	help	  Say Y here if you want to support an AD7142/3/7/8/7A touch sensor. 	  You should select a bus connection too. 	  To compile this driver as a module, choose M here: the	  module will be called ad714x. config INPUT_AD714X_I2C	tristate "support I2C bus connection"	depends on INPUT_AD714X && I2C	default y	help	  Say Y here if you have AD7142/AD7147 hooked to an I2C bus. 	  To compile this driver as a module, choose M here: the	  module will be called ad714x-i2c. config INPUT_AD714X_SPI	tristate "support SPI bus connection"	depends on INPUT_AD714X && SPI	default y	help	  Say Y here if you have AD7142/AD7147 hooked to a SPI bus. 	  To compile this driver as a module, choose M here: the	  module will be called ad714x-spi. config INPUT_BMA150	tristate "BMA150/SMB380 acceleration sensor support"	depends on I2C	select INPUT_POLLDEV	help	  Say Y here if you have Bosch Sensortec's BMA150 or SMB380	  acceleration sensor hooked to an I2C bus. 	  To compile this driver as a module, choose M here: the	  module will be called bma150. config INPUT_PCSPKR	tristate "PC Speaker support"	depends on PCSPKR_PLATFORM	help	  Say Y here if you want the standard PC Speaker to be used for	  bells and whistles. 	  If unsure, say Y. 	  To compile this driver as a module, choose M here: the	  module will be called pcspkr. config INPUT_PM8XXX_VIBRATOR	tristate "Qualcomm PM8XXX vibrator support"	depends on MFD_PM8XXX	select INPUT_FF_MEMLESS	help	  This option enables device driver support for the vibrator	  on Qualcomm PM8xxx chip. This driver supports ff-memless interface	  from input framework. 	  To compile this driver as module, choose M here: the	  module will be called pm8xxx-vibrator. config INPUT_PMIC8XXX_PWRKEY	tristate "PMIC8XXX power key support"	depends on MFD_PM8XXX	help	  Say Y here if you want support for the PMIC8XXX power key. 	  If unsure, say N. 	  To compile this driver as a module, choose M here: the	  module will be called pmic8xxx-pwrkey. config INPUT_SPARCSPKR	tristate "SPARC Speaker support"	depends on PCI && SPARC64	help	  Say Y here if you want the standard Speaker on Sparc PCI systems	  to be used for bells and whistles. 	  If unsure, say Y. 	  To compile this driver as a module, choose M here: the	  module will be called sparcspkr. config INPUT_M68K_BEEP	tristate "M68k Beeper support"	depends on M68K config INPUT_MAX8925_ONKEY	tristate "MAX8925 ONKEY support"	depends on MFD_MAX8925	help	  Support the ONKEY of MAX8925 PMICs as an input device	  reporting power button status. 	  To compile this driver as a module, choose M here: the module	  will be called max8925_onkey. config INPUT_MC13783_PWRBUTTON	tristate "MC13783 ON buttons"	depends on MFD_MC13783	help	  Support the ON buttons of MC13783 PMIC as an input device	  reporting power button status. 	  To compile this driver as a module, choose M here: the module	  will be called mc13783-pwrbutton. config INPUT_MMA8450	tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"	depends on I2C	select INPUT_POLLDEV	help	  Say Y here if you want to support Freescale's MMA8450 Accelerometer	  through I2C interface. 	  To compile this driver as a module, choose M here: the	  module will be called mma8450. config INPUT_MPU3050	tristate "MPU3050 Triaxial gyroscope sensor"	depends on I2C	help	  Say Y here if you want to support InvenSense MPU3050	  connected via an I2C bus. 	  To compile this driver as a module, choose M here: the	  module will be called mpu3050. config INPUT_APANEL	tristate "Fujitsu Lifebook Application Panel buttons"	depends on X86 && I2C && LEDS_CLASS	select INPUT_POLLDEV	select CHECK_SIGNATURE	help	 Say Y here for support of the Application Panel buttons, used on	 Fujitsu Lifebook. These are attached to the mainboard through	 an SMBus interface managed by the I2C Intel ICH (i801) driver,	 which you should also build for this kernel. 	 To compile this driver as a module, choose M here: the module will	 be called apanel. config INPUT_IXP4XX_BEEPER	tristate "IXP4XX Beeper support"	depends on ARCH_IXP4XX	help	  If you say yes here, you can connect a beeper to the	  ixp4xx gpio pins. This is used by the LinkSys NSLU2. 	  If unsure, say Y. 	  To compile this driver as a module, choose M here: the	  module will be called ixp4xx-beeper. config INPUT_COBALT_BTNS	tristate "Cobalt button interface"	depends on MIPS_COBALT	select INPUT_POLLDEV	help	  Say Y here if you want to support MIPS Cobalt button interface. 	  To compile this driver as a module, choose M here: the	  module will be called cobalt_btns. config INPUT_WISTRON_BTNS	tristate "x86 Wistron laptop button interface"	depends on X86 && !X86_64	select INPUT_POLLDEV	select INPUT_SPARSEKMAP	select NEW_LEDS	select LEDS_CLASS	select CHECK_SIGNATURE	help	  Say Y here for support of Wistron laptop button interfaces, used on	  laptops of various brands, including Acer and Fujitsu-Siemens. If	  available, mail and wifi LEDs will be controllable via /sys/class/leds. 	  To compile this driver as a module, choose M here: the module will	  be called wistron_btns. config INPUT_ATLAS_BTNS	tristate "x86 Atlas button interface"	depends on X86 && ACPI	help	  Say Y here for support of Atlas wallmount touchscreen buttons.	  The events will show up as scancodes F1 through F9 via evdev. 	  To compile this driver as a module, choose M here: the module will	  be called atlas_btns. config INPUT_ATI_REMOTE2	tristate "ATI / Philips USB RF remote control"	depends on USB_ARCH_HAS_HCD	select USB	help	  Say Y here if you want to use an ATI or Philips USB RF remote control.	  These are RF remotes with USB receivers.	  ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards	  and is also available as a separate product.	  This driver provides mouse pointer, left and right mouse buttons,	  and maps all the other remote buttons to keypress events. 	  To compile this driver as a module, choose M here: the module will be	  called ati_remote2. config INPUT_KEYSPAN_REMOTE	tristate "Keyspan DMR USB remote control (EXPERIMENTAL)"	depends on EXPERIMENTAL	depends on USB_ARCH_HAS_HCD	select USB	help	  Say Y here if you want to use a Keyspan DMR USB remote control.	  Currently only the UIA-11 type of receiver has been tested.  The tag	  on the receiver that connects to the USB port should have a P/N that	  will tell you what type of DMR you have.  The UIA-10 type is not	  supported at this time.  This driver maps all buttons to keypress	  events. 	  To compile this driver as a module, choose M here: the module will	  be called keyspan_remote. config INPUT_KXTJ9	tristate "Kionix KXTJ9 tri-axis digital accelerometer"	depends on I2C	help	  Say Y here to enable support for the Kionix KXTJ9 digital tri-axis	  accelerometer. 	  To compile this driver as a module, choose M here: the module will	  be called kxtj9. config INPUT_KXTJ9_POLLED_MODE	bool "Enable polling mode support"	depends on INPUT_KXTJ9	select INPUT_POLLDEV	help	  Say Y here if you need accelerometer to work in polling mode. config INPUT_POWERMATE	tristate "Griffin PowerMate and Contour Jog support"	depends on USB_ARCH_HAS_HCD	select USB	help	  Say Y here if you want to use Griffin PowerMate or Contour Jog devices.	  These are aluminum dials which can measure clockwise and anticlockwise	  rotation.  The dial also acts as a pushbutton.  The base contains an LED	  which can be instructed to pulse or to switch to a particular intensity. 	  You can download userspace tools from	  <http://sowerbutts.com/powermate/>. 	  To compile this driver as a module, choose M here: the	  module will be called powermate. config INPUT_YEALINK	tristate "Yealink usb-p1k voip phone"	depends on EXPERIMENTAL	depends on USB_ARCH_HAS_HCD	select USB	help	  Say Y here if you want to enable keyboard and LCD functions of the	  Yealink usb-p1k usb phones. The audio part is enabled by the generic	  usb sound driver, so you might want to enable that as well. 	  For information about how to use these additional functions, see	  <file:Documentation/input/yealink.txt>. 	  To compile this driver as a module, choose M here: the module will be	  called yealink. config INPUT_CM109	tristate "C-Media CM109 USB I/O Controller"	depends on EXPERIMENTAL	depends on USB_ARCH_HAS_HCD	select USB	help	  Say Y here if you want to enable keyboard and buzzer functions of the	  C-Media CM109 usb phones. The audio part is enabled by the generic	  usb sound driver, so you might want to enable that as well. 	  To compile this driver as a module, choose M here: the module will be	  called cm109. config INPUT_TWL4030_PWRBUTTON	tristate "TWL4030 Power button Driver"	depends on TWL4030_CORE	help	  Say Y here if you want to enable power key reporting via the	  TWL4030 family of chips. 	  To compile this driver as a module, choose M here. The module will	  be called twl4030_pwrbutton. config INPUT_TWL4030_VIBRA	tristate "Support for TWL4030 Vibrator"	depends on TWL4030_CORE	select MFD_TWL4030_AUDIO	select INPUT_FF_MEMLESS	help	  This option enables support for TWL4030 Vibrator Driver. 	  To compile this driver as a module, choose M here. The module will	  be called twl4030_vibra. config INPUT_TWL6040_VIBRA	tristate "Support for TWL6040 Vibrator"	depends on TWL4030_CORE	select TWL6040_CORE	select INPUT_FF_MEMLESS	help	  This option enables support for TWL6040 Vibrator Driver. 	  To compile this driver as a module, choose M here. The module will	  be called twl6040_vibra. config INPUT_UINPUT	tristate "User level driver support"	help	  Say Y here if you want to support user level drivers for input	  subsystem accessible under char device 10:223 - /dev/input/uinput. 	  To compile this driver as a module, choose M here: the	  module will be called uinput. config INPUT_SGI_BTNS	tristate "SGI Indy/O2 volume button interface"	depends on SGI_IP22 || SGI_IP32	select INPUT_POLLDEV	help	  Say Y here if you want to support SGI Indy/O2 volume button interface. 	  To compile this driver as a module, choose M here: the	  module will be called sgi_btns. config HP_SDC_RTC	tristate "HP SDC Real Time Clock"	depends on (GSC || HP300) && SERIO	select HP_SDC	help	  Say Y here if you want to support the built-in real time clock	  of the HP SDC controller. config INPUT_PCF50633_PMU	tristate "PCF50633 PMU events"	depends on MFD_PCF50633	help	 Say Y to include support for delivering  PMU events via  input	 layer on NXP PCF50633. config INPUT_PCF8574	tristate "PCF8574 Keypad input device"	depends on I2C && EXPERIMENTAL	help	  Say Y here if you want to support a keypad connetced via I2C	  with a PCF8574. 	  To compile this driver as a module, choose M here: the	  module will be called pcf8574_keypad. config INPUT_PWM_BEEPER	tristate "PWM beeper support"	depends on HAVE_PWM	help	  Say Y here to get support for PWM based beeper devices. 	  If unsure, say N. 	  To compile this driver as a module, choose M here: the module will be	  called pwm-beeper. config INPUT_GPIO_ROTARY_ENCODER	tristate "Rotary encoders connected to GPIO pins"	depends on GPIOLIB && GENERIC_GPIO	help	  Say Y here to add support for rotary encoders connected to GPIO lines.	  Check file:Documentation/input/rotary-encoder.txt for more	  information. 	  To compile this driver as a module, choose M here: the	  module will be called rotary_encoder. config INPUT_RB532_BUTTON	tristate "Mikrotik Routerboard 532 button interface"	depends on MIKROTIK_RB532	depends on GPIOLIB && GENERIC_GPIO	select INPUT_POLLDEV	help	  Say Y here if you want support for the S1 button built into	  Mikrotik's Routerboard 532. 	  To compile this driver as a module, choose M here: the	  module will be called rb532_button. config INPUT_DM355EVM	tristate "TI DaVinci DM355 EVM Keypad and IR Remote"	depends on MFD_DM355EVM_MSP	select INPUT_SPARSEKMAP	help	  Supports the pushbuttons and IR remote used with	  the DM355 EVM board. 	  To compile this driver as a module, choose M here: the	  module will be called dm355evm_keys. config INPUT_BFIN_ROTARY	tristate "Blackfin Rotary support"	depends on BF54x || BF52x	help	  Say Y here if you want to use the Blackfin Rotary. 	  To compile this driver as a module, choose M here: the	  module will be called bfin-rotary. config INPUT_WM831X_ON	tristate "WM831X ON pin"	depends on MFD_WM831X	help	  Support the ON pin of WM831X PMICs as an input device	  reporting power button status. 	  To compile this driver as a module, choose M here: the module	  will be called wm831x_on. config INPUT_PCAP	tristate "Motorola EZX PCAP misc input events"	depends on EZX_PCAP	help	  Say Y here if you want to use Power key and Headphone button	  on Motorola EZX phones. 	  To compile this driver as a module, choose M here: the	  module will be called pcap_keys. config INPUT_ADXL34X	tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"	default n	help	  Say Y here if you have a Accelerometer interface using the	  ADXL345/6 controller, and your board-specific initialization	  code includes that in its table of devices. 	  This driver can use either I2C or SPI communication to the	  ADXL345/6 controller.  Select the appropriate method for	  your system. 	  If unsure, say N (but it's safe to say "Y"). 	  To compile this driver as a module, choose M here: the	  module will be called adxl34x. config INPUT_ADXL34X_I2C	tristate "support I2C bus connection"	depends on INPUT_ADXL34X && I2C	default y	help	  Say Y here if you have ADXL345/6 hooked to an I2C bus. 	  To compile this driver as a module, choose M here: the	  module will be called adxl34x-i2c. config INPUT_ADXL34X_SPI

Lines 1–500 of 547. Load more