## Makefile for the Linux kernel device drivers.## 15 Sep 2000, Christoph Hellwig <hch@infradead.org># Rewritten to use lists instead of if-statements.# obj-y				+= irqchip/obj-y				+= bus/ # GPIO must come after pinctrl as gpios may need to mux pins etcobj-y				+= pinctrl/obj-y				+= gpio/obj-y				+= pwm/obj-$(CONFIG_PCI)		+= pci/obj-$(CONFIG_PARISC)		+= parisc/obj-$(CONFIG_RAPIDIO)		+= rapidio/obj-y				+= video/obj-y				+= idle/ # IPMI must come before ACPI in order to provide IPMI opregion supportobj-$(CONFIG_IPMI_HANDLER)	+= char/ipmi/ obj-$(CONFIG_ACPI)		+= acpi/obj-$(CONFIG_SFI)		+= sfi/# PnP must come after ACPI since it will eventually need to check if acpi# was used and do nothing if soobj-$(CONFIG_PNP)		+= pnp/obj-y				+= amba/# Many drivers will want to use DMA so this has to be made available# really early.obj-$(CONFIG_DMA_ENGINE)	+= dma/ obj-$(CONFIG_VIRTIO)		+= virtio/obj-$(CONFIG_XEN)		+= xen/ # regulators early, since some subsystems rely on them to initializeobj-$(CONFIG_REGULATOR)		+= regulator/ # tty/ comes before char/ so that the VT console is the boot-time# default.obj-y				+= tty/obj-y				+= char/ # gpu/ comes after char for AGP vs DRM startupobj-y				+= gpu/ obj-$(CONFIG_CONNECTOR)		+= connector/ # i810fb and intelfb depend on char/agp/obj-$(CONFIG_FB_I810)           += video/i810/obj-$(CONFIG_FB_INTEL)          += video/intelfb/ obj-$(CONFIG_PARPORT)		+= parport/obj-y				+= base/ block/ misc/ mfd/ nfc/obj-$(CONFIG_NUBUS)		+= nubus/obj-y				+= macintosh/obj-$(CONFIG_IDE)		+= ide/obj-$(CONFIG_SCSI)		+= scsi/obj-$(CONFIG_ATA)		+= ata/obj-$(CONFIG_TARGET_CORE)	+= target/obj-$(CONFIG_MTD)		+= mtd/obj-$(CONFIG_SPI)		+= spi/obj-y				+= hsi/obj-y				+= net/obj-$(CONFIG_ATM)		+= atm/obj-$(CONFIG_FUSION)		+= message/obj-y				+= firewire/obj-$(CONFIG_UIO)		+= uio/obj-$(CONFIG_VFIO)		+= vfio/obj-y				+= cdrom/obj-y				+= auxdisplay/obj-$(CONFIG_PCCARD)		+= pcmcia/obj-$(CONFIG_DIO)		+= dio/obj-$(CONFIG_SBUS)		+= sbus/obj-$(CONFIG_ZORRO)		+= zorro/obj-$(CONFIG_MAC)		+= macintosh/obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/obj-$(CONFIG_PARIDE) 		+= block/paride/obj-$(CONFIG_TC)		+= tc/obj-$(CONFIG_UWB)		+= uwb/obj-$(CONFIG_USB_OTG_UTILS)	+= usb/obj-$(CONFIG_USB)		+= usb/obj-$(CONFIG_PCI)		+= usb/obj-$(CONFIG_USB_GADGET)	+= usb/obj-$(CONFIG_SERIO)		+= input/serio/obj-$(CONFIG_GAMEPORT)		+= input/gameport/obj-$(CONFIG_INPUT)		+= input/obj-$(CONFIG_I2O)		+= message/obj-$(CONFIG_RTC_LIB)		+= rtc/obj-y				+= i2c/ media/obj-$(CONFIG_PPS)		+= pps/obj-$(CONFIG_PTP_1588_CLOCK)	+= ptp/obj-$(CONFIG_W1)		+= w1/obj-$(CONFIG_POWER_SUPPLY)	+= power/obj-$(CONFIG_HWMON)		+= hwmon/obj-$(CONFIG_THERMAL)		+= thermal/obj-$(CONFIG_WATCHDOG)		+= watchdog/obj-$(CONFIG_MD)		+= md/obj-$(CONFIG_BT)		+= bluetooth/obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/obj-$(CONFIG_ISDN)		+= isdn/obj-$(CONFIG_EDAC)		+= edac/obj-$(CONFIG_EISA)		+= eisa/obj-y				+= lguest/obj-$(CONFIG_CPU_FREQ)		+= cpufreq/obj-$(CONFIG_CPU_IDLE)		+= cpuidle/obj-y				+= mmc/obj-$(CONFIG_MEMSTICK)		+= memstick/obj-y				+= leds/obj-$(CONFIG_INFINIBAND)	+= infiniband/obj-$(CONFIG_SGI_SN)		+= sn/obj-y				+= firmware/obj-$(CONFIG_CRYPTO)		+= crypto/obj-$(CONFIG_SUPERH)		+= sh/obj-$(CONFIG_ARCH_SHMOBILE)	+= sh/ifndef CONFIG_ARCH_USES_GETTIMEOFFSETobj-y				+= clocksource/endifobj-$(CONFIG_DCA)		+= dca/obj-$(CONFIG_HID)		+= hid/obj-$(CONFIG_PPC_PS3)		+= ps3/obj-$(CONFIG_OF)		+= of/obj-$(CONFIG_SSB)		+= ssb/obj-$(CONFIG_BCMA)		+= bcma/obj-$(CONFIG_VHOST_NET)		+= vhost/obj-$(CONFIG_VLYNQ)		+= vlynq/obj-$(CONFIG_STAGING)		+= staging/obj-y				+= platform/#common clk codeobj-y				+= clk/ obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock/obj-$(CONFIG_NFC)		+= nfc/obj-$(CONFIG_IOMMU_SUPPORT)	+= iommu/obj-$(CONFIG_REMOTEPROC)	+= remoteproc/obj-$(CONFIG_RPMSG)		+= rpmsg/ # Virtualization driversobj-$(CONFIG_VIRT_DRIVERS)	+= virt/obj-$(CONFIG_HYPERV)		+= hv/ obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/obj-$(CONFIG_EXTCON)		+= extcon/obj-$(CONFIG_MEMORY)		+= memory/obj-$(CONFIG_IIO)		+= iio/obj-$(CONFIG_VME_BUS)		+= vme/