/* * OpenRISC setup.c * * Linux architectural port borrowing liberally from similar works of * others.  All original copyrights apply as per the original source * declaration. * * Modifications for the OpenRISC architecture: * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> * *      This program is free software; you can redistribute it and/or *      modify it under the terms of the GNU General Public License *      as published by the Free Software Foundation; either version *      2 of the License, or (at your option) any later version. * * This file handles the architecture-dependent parts of initialization */ #include <linux/errno.h>#include <linux/sched.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/stddef.h>#include <linux/unistd.h>#include <linux/ptrace.h>#include <linux/slab.h>#include <linux/tty.h>#include <linux/ioport.h>#include <linux/delay.h>#include <linux/console.h>#include <linux/init.h>#include <linux/bootmem.h>#include <linux/seq_file.h>#include <linux/serial.h>#include <linux/initrd.h>#include <linux/of_fdt.h>#include <linux/of.h>#include <linux/memblock.h>#include <linux/device.h> #include <asm/sections.h>#include <asm/segment.h>#include <asm/pgtable.h>#include <asm/types.h>#include <asm/setup.h>#include <asm/io.h>#include <asm/cpuinfo.h>#include <asm/delay.h> #include "vmlinux.h" static void __init setup_memory(void){	unsigned long ram_start_pfn;	unsigned long ram_end_pfn;	phys_addr_t memory_start, memory_end;	struct memblock_region *region; 	memory_end = memory_start = 0; 	/* Find main memory where is the kernel, we assume its the only one */	for_each_memblock(memory, region) {		memory_start = region->base;		memory_end = region->base + region->size;		printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,		       memory_start, memory_end);	} 	if (!memory_end) {		panic("No memory!");	} 	ram_start_pfn = PFN_UP(memory_start);	ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM()); 	/* setup bootmem globals (we use no_bootmem, but mm still depends on this) */	min_low_pfn = ram_start_pfn;	max_low_pfn = ram_end_pfn;	max_pfn = ram_end_pfn; 	/*	 * initialize the boot-time allocator (with low memory only).	 *	 * This makes the memory from the end of the kernel to the end of	 * RAM usable.	 */	memblock_reserve(__pa(_stext), _end - _stext); 	early_init_fdt_reserve_self();	early_init_fdt_scan_reserved_mem(); 	memblock_dump_all();} struct cpuinfo cpuinfo; static void print_cpuinfo(void){	unsigned long upr = mfspr(SPR_UPR);	unsigned long vr = mfspr(SPR_VR);	unsigned int version;	unsigned int revision; 	version = (vr & SPR_VR_VER) >> 24;	revision = (vr & SPR_VR_REV); 	printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",	       version, revision, cpuinfo.clock_frequency / 1000000); 	if (!(upr & SPR_UPR_UP)) {		printk(KERN_INFO		       "-- no UPR register... unable to detect configuration\n");		return;	} 	if (upr & SPR_UPR_DCP)		printk(KERN_INFO		       "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",		       cpuinfo.dcache_size, cpuinfo.dcache_block_size,		       cpuinfo.dcache_ways);	else		printk(KERN_INFO "-- dcache disabled\n");	if (upr & SPR_UPR_ICP)		printk(KERN_INFO		       "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",		       cpuinfo.icache_size, cpuinfo.icache_block_size,		       cpuinfo.icache_ways);	else		printk(KERN_INFO "-- icache disabled\n"); 	if (upr & SPR_UPR_DMP)		printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",		       1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),		       1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));	if (upr & SPR_UPR_IMP)		printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",		       1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),		       1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW)); 	printk(KERN_INFO "-- additional features:\n");	if (upr & SPR_UPR_DUP)		printk(KERN_INFO "-- debug unit\n");	if (upr & SPR_UPR_PCUP)		printk(KERN_INFO "-- performance counters\n");	if (upr & SPR_UPR_PMP)		printk(KERN_INFO "-- power management\n");	if (upr & SPR_UPR_PICP)		printk(KERN_INFO "-- PIC\n");	if (upr & SPR_UPR_TTP)		printk(KERN_INFO "-- timer\n");	if (upr & SPR_UPR_CUP)		printk(KERN_INFO "-- custom unit(s)\n");} void __init setup_cpuinfo(void){	struct device_node *cpu;	unsigned long iccfgr, dccfgr;	unsigned long cache_set_size; 	cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");	if (!cpu)		panic("No compatible CPU found in device tree...\n"); 	iccfgr = mfspr(SPR_ICCFGR);	cpuinfo.icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);	cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);	cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);	cpuinfo.icache_size =	    cache_set_size * cpuinfo.icache_ways * cpuinfo.icache_block_size; 	dccfgr = mfspr(SPR_DCCFGR);	cpuinfo.dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);	cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);	cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);	cpuinfo.dcache_size =	    cache_set_size * cpuinfo.dcache_ways * cpuinfo.dcache_block_size; 	if (of_property_read_u32(cpu, "clock-frequency",				 &cpuinfo.clock_frequency)) {		printk(KERN_WARNING		       "Device tree missing CPU 'clock-frequency' parameter."		       "Assuming frequency 25MHZ"		       "This is probably not what you want.");	} 	of_node_put(cpu); 	print_cpuinfo();} /** * or32_early_setup * * Handles the pointer to the device tree that this kernel is to use * for establishing the available platform devices. * * Falls back on built-in device tree in case null pointer is passed. */ void __init or32_early_setup(void *fdt){	if (fdt)		pr_info("FDT at %p\n", fdt);	else {		fdt = __dtb_start;		pr_info("Compiled-in FDT at %p\n", fdt);	}	early_init_devtree(fdt);} static inline unsigned long extract_value_bits(unsigned long reg,					       short bit_nr, short width){	return (reg >> bit_nr) & (0 << width);} static inline unsigned long extract_value(unsigned long reg, unsigned long mask){	while (!(mask & 0x1)) {		reg = reg >> 1;		mask = mask >> 1;	}	return mask & reg;} void __init detect_unit_config(unsigned long upr, unsigned long mask,			       char *text, void (*func) (void)){	if (text != NULL)		printk("%s", text); 	if (upr & mask) {		if (func != NULL)			func();		else			printk("present\n");	} else		printk("not present\n");} /* * calibrate_delay * * Lightweight calibrate_delay implementation that calculates loops_per_jiffy * from the clock frequency passed in via the device tree * */ void calibrate_delay(void){	const int *val;	struct device_node *cpu = NULL;	cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");	val = of_get_property(cpu, "clock-frequency", NULL);	if (!val)		panic("no cpu 'clock-frequency' parameter in device tree");	loops_per_jiffy = *val / HZ;	pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",		loops_per_jiffy / (500000 / HZ),		(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);} void __init setup_arch(char **cmdline_p){	unflatten_and_copy_device_tree(); 	setup_cpuinfo(); 	/* process 1's initial memory region is the kernel code/data */	init_mm.start_code = (unsigned long)_stext;	init_mm.end_code = (unsigned long)_etext;	init_mm.end_data = (unsigned long)_edata;	init_mm.brk = (unsigned long)_end; #ifdef CONFIG_BLK_DEV_INITRD	initrd_start = (unsigned long)&__initrd_start;	initrd_end = (unsigned long)&__initrd_end;	if (initrd_start == initrd_end) {		initrd_start = 0;		initrd_end = 0;	}	initrd_below_start_ok = 1;#endif 	/* setup memblock allocator */	setup_memory(); 	/* paging_init() sets up the MMU and marks all pages as reserved */	paging_init(); #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)	if (!conswitchp)		conswitchp = &dummy_con;#endif 	*cmdline_p = boot_command_line; 	printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");} static int show_cpuinfo(struct seq_file *m, void *v){	unsigned long vr;	int version, revision; 	vr = mfspr(SPR_VR);	version = (vr & SPR_VR_VER) >> 24;	revision = vr & SPR_VR_REV; 	seq_printf(m,		  "cpu\t\t: OpenRISC-%x\n"		  "revision\t: %d\n"		  "frequency\t: %ld\n"		  "dcache size\t: %d bytes\n"		  "dcache block size\t: %d bytes\n"		  "dcache ways\t: %d\n"		  "icache size\t: %d bytes\n"		  "icache block size\t: %d bytes\n"		  "icache ways\t: %d\n"		  "immu\t\t: %d entries, %lu ways\n"		  "dmmu\t\t: %d entries, %lu ways\n"		  "bogomips\t: %lu.%02lu\n",		  version,		  revision,		  loops_per_jiffy * HZ,		  cpuinfo.dcache_size,		  cpuinfo.dcache_block_size,		  cpuinfo.dcache_ways,		  cpuinfo.icache_size,		  cpuinfo.icache_block_size,		  cpuinfo.icache_ways,		  1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),		  1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),		  1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),		  1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),		  (loops_per_jiffy * HZ) / 500000,		  ((loops_per_jiffy * HZ) / 5000) % 100);	return 0;} static void *c_start(struct seq_file *m, loff_t * pos){	/* We only have one CPU... */	return *pos < 1 ? (void *)1 : NULL;} static void *c_next(struct seq_file *m, void *v, loff_t * pos){	++*pos;	return NULL;} static void c_stop(struct seq_file *m, void *v){} const struct seq_operations cpuinfo_op = {	.start = c_start,	.next = c_next,	.stop = c_stop,	.show = show_cpuinfo,};