menu "Bluetooth device drivers"	depends on BT config BT_INTEL	tristate	select REGMAP config BT_BCM	tristate	select FW_LOADER config BT_RTL	tristate	select FW_LOADER config BT_QCA	tristate	select FW_LOADER config BT_HCIBTUSB	tristate "HCI USB driver"	depends on USB	select BT_INTEL	help	  Bluetooth HCI USB driver.	  This driver is required if you want to use Bluetooth devices with	  USB interface. 	  Say Y here to compile support for Bluetooth USB devices into the	  kernel or say M to compile it as module (btusb). config BT_HCIBTUSB_BCM	bool "Broadcom protocol support"	depends on BT_HCIBTUSB	select BT_BCM	default y	help	  The Broadcom protocol support enables firmware and patchram	  download support for Broadcom Bluetooth controllers. 	  Say Y here to compile support for Broadcom protocol. config BT_HCIBTUSB_RTL	bool "Realtek protocol support"	depends on BT_HCIBTUSB	select BT_RTL	default y	help	  The Realtek protocol support enables firmware and configuration	  download support for Realtek Bluetooth controllers. 	  Say Y here to compile support for Realtek protocol. config BT_HCIBTSDIO	tristate "HCI SDIO driver"	depends on MMC	help	  Bluetooth HCI SDIO driver.	  This driver is required if you want to use Bluetooth device with	  SDIO interface. 	  Say Y here to compile support for Bluetooth SDIO devices into the	  kernel or say M to compile it as module (btsdio). config BT_HCIUART	tristate "HCI UART driver"	depends on TTY	help	  Bluetooth HCI UART driver.	  This driver is required if you want to use Bluetooth devices with	  serial port interface. You will also need this driver if you have	  UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card	  adapter and BrainBoxes Bluetooth PC Card. 	  Say Y here to compile support for Bluetooth UART devices into the	  kernel or say M to compile it as module (hci_uart). config BT_HCIUART_SERDEV	bool	depends on SERIAL_DEV_BUS && BT_HCIUART	depends on SERIAL_DEV_BUS=y || SERIAL_DEV_BUS=BT_HCIUART	default y config BT_HCIUART_H4	bool "UART (H4) protocol support"	depends on BT_HCIUART	help	  UART (H4) is serial protocol for communication between Bluetooth	  device and host. This protocol is required for most Bluetooth devices	  with UART interface, including PCMCIA and CF cards. 	  Say Y here to compile support for HCI UART (H4) protocol. config BT_HCIUART_NOKIA	tristate "UART Nokia H4+ protocol support"	depends on BT_HCIUART	depends on BT_HCIUART_SERDEV	depends on PM	select BT_HCIUART_H4	help	  Nokia H4+ is serial protocol for communication between Bluetooth	  device and host. This protocol is required for Bluetooth devices	  with UART interface in Nokia devices. 	  Say Y here to compile support for Nokia's H4+ protocol. config BT_HCIUART_BCSP	bool "BCSP protocol support"	depends on BT_HCIUART	select BITREVERSE	help	  BCSP (BlueCore Serial Protocol) is serial protocol for communication	  between Bluetooth device and host. This protocol is required for non	  USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and	  CF cards. 	  Say Y here to compile support for HCI BCSP protocol. config BT_HCIUART_ATH3K	bool "Atheros AR300x serial support"	depends on BT_HCIUART	select BT_HCIUART_H4	help	  HCIATH3K (HCI Atheros AR300x) is a serial protocol for	  communication between host and Atheros AR300x Bluetooth devices.	  This protocol enables AR300x chips to be enabled with	  power management support.	  Enable this if you have Atheros AR300x serial Bluetooth device. 	  Say Y here to compile support for HCI UART ATH3K protocol. config BT_HCIUART_LL	bool "HCILL protocol support"	depends on BT_HCIUART_SERDEV	help	  HCILL (HCI Low Level) is a serial protocol for communication	  between Bluetooth device and host. This protocol is required for	  serial Bluetooth devices that are based on Texas Instruments'	  BRF chips. 	  Say Y here to compile support for HCILL protocol. config BT_HCIUART_3WIRE	bool "Three-wire UART (H5) protocol support"	depends on BT_HCIUART	help	  The HCI Three-wire UART Transport Layer makes it possible to	  user the Bluetooth HCI over a serial port interface. The HCI	  Three-wire UART Transport Layer assumes that the UART	  communication may have bit errors, overrun errors or burst	  errors and thereby making CTS/RTS lines unnecessary. 	  Say Y here to compile support for Three-wire UART protocol. config BT_HCIUART_INTEL	bool "Intel protocol support"	depends on BT_HCIUART	select BT_HCIUART_H4	select BT_INTEL	help	  The Intel protocol support enables Bluetooth HCI over serial	  port interface for Intel Bluetooth controllers. 	  Say Y here to compile support for Intel protocol. config BT_HCIUART_BCM	bool "Broadcom protocol support"	depends on BT_HCIUART	select BT_HCIUART_H4	select BT_BCM	help	  The Broadcom protocol support enables Bluetooth HCI over serial	  port interface for Broadcom Bluetooth controllers. 	  Say Y here to compile support for Broadcom protocol. config BT_HCIUART_QCA	bool "Qualcomm Atheros protocol support"	depends on BT_HCIUART	select BT_HCIUART_H4	select BT_QCA	help	  The Qualcomm Atheros protocol supports HCI In-Band Sleep feature	  over serial port interface(H4) between controller and host.	  This protocol is required for UART clock control for QCA Bluetooth	  devices. 	  Say Y here to compile support for QCA protocol. config BT_HCIUART_AG6XX	bool "Intel AG6XX protocol support"	depends on BT_HCIUART	select BT_HCIUART_H4	select BT_INTEL	help	  The Intel/AG6XX protocol support enables Bluetooth HCI over serial	  port interface for Intel ibt 2.1 Bluetooth controllers. 	  Say Y here to compile support for Intel AG6XX protocol. config BT_HCIUART_MRVL	bool "Marvell protocol support"	depends on BT_HCIUART	select BT_HCIUART_H4	help	  Marvell is serial protocol for communication between Bluetooth	  device and host. This protocol is required for most Marvell Bluetooth	  devices with UART interface. 	  Say Y here to compile support for HCI MRVL protocol. config BT_HCIBCM203X	tristate "HCI BCM203x USB driver"	depends on USB	select FW_LOADER	help	  Bluetooth HCI BCM203x USB driver.	  This driver provides the firmware loading mechanism for the Broadcom	  Blutonium based devices. 	  Say Y here to compile support for HCI BCM203x devices into the	  kernel or say M to compile it as module (bcm203x). config BT_HCIBPA10X	tristate "HCI BPA10x USB driver"	depends on USB && BT_HCIUART	select BT_HCIUART_H4	help	  Bluetooth HCI BPA10x USB driver.	  This driver provides support for the Digianswer BPA 100/105 Bluetooth	  sniffer devices. 	  Say Y here to compile support for HCI BPA10x devices into the	  kernel or say M to compile it as module (bpa10x). config BT_HCIBFUSB	tristate "HCI BlueFRITZ! USB driver"	depends on USB	select FW_LOADER	help	  Bluetooth HCI BlueFRITZ! USB driver.	  This driver provides support for Bluetooth USB devices with AVM	  interface:	     AVM BlueFRITZ! USB 	  Say Y here to compile support for HCI BFUSB devices into the	  kernel or say M to compile it as module (bfusb). config BT_HCIDTL1	tristate "HCI DTL1 (PC Card) driver"	depends on PCMCIA	help	  Bluetooth HCI DTL1 (PC Card) driver.	  This driver provides support for Bluetooth PCMCIA devices with	  Nokia DTL1 interface:	     Nokia Bluetooth Card	     Socket Bluetooth CF Card 	  Say Y here to compile support for HCI DTL1 devices into the	  kernel or say M to compile it as module (dtl1_cs). config BT_HCIBT3C	tristate "HCI BT3C (PC Card) driver"	depends on PCMCIA	select FW_LOADER	help	  Bluetooth HCI BT3C (PC Card) driver.	  This driver provides support for Bluetooth PCMCIA devices with	  3Com BT3C interface:	     3Com Bluetooth Card (3CRWB6096)	     HP Bluetooth Card 	  Say Y here to compile support for HCI BT3C devices into the	  kernel or say M to compile it as module (bt3c_cs). config BT_HCIBLUECARD	tristate "HCI BlueCard (PC Card) driver"	depends on PCMCIA	help	  Bluetooth HCI BlueCard (PC Card) driver.	  This driver provides support for Bluetooth PCMCIA devices with	  Anycom BlueCard interface:	     Anycom Bluetooth PC Card	     Anycom Bluetooth CF Card 	  Say Y here to compile support for HCI BlueCard devices into the	  kernel or say M to compile it as module (bluecard_cs). config BT_HCIBTUART	tristate "HCI UART (PC Card) device driver"	depends on PCMCIA	help	  Bluetooth HCI UART (PC Card) driver.	  This driver provides support for Bluetooth PCMCIA devices with	  an UART interface:	     Xircom CreditCard Bluetooth Adapter	     Xircom RealPort2 Bluetooth Adapter	     Sphinx PICO Card	     H-Soft blue+Card	     Cyber-blue Compact Flash Card 	  Say Y here to compile support for HCI UART devices into the	  kernel or say M to compile it as module (btuart_cs). config BT_HCIVHCI	tristate "HCI VHCI (Virtual HCI device) driver"	help	  Bluetooth Virtual HCI device driver.	  This driver is required if you want to use HCI Emulation software. 	  Say Y here to compile support for virtual HCI devices into the	  kernel or say M to compile it as module (hci_vhci). config BT_MRVL	tristate "Marvell Bluetooth driver support"	help	  The core driver to support Marvell Bluetooth devices. 	  This driver is required if you want to support	  Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8997. 	  Say Y here to compile Marvell Bluetooth driver	  into the kernel or say M to compile it as module. config BT_MRVL_SDIO	tristate "Marvell BT-over-SDIO driver"	depends on BT_MRVL && MMC	select FW_LOADER	select WANT_DEV_COREDUMP	help	  The driver for Marvell Bluetooth chipsets with SDIO interface. 	  This driver is required if you want to use Marvell Bluetooth	  devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8997	  chipsets are supported. 	  Say Y here to compile support for Marvell BT-over-SDIO driver	  into the kernel or say M to compile it as module. config BT_ATH3K	tristate "Atheros firmware download driver"	depends on BT_HCIBTUSB	select FW_LOADER	help	  Bluetooth firmware download driver.	  This driver loads the firmware into the Atheros Bluetooth	  chipset. 	  Say Y here to compile support for "Atheros firmware download driver"	  into the kernel or say M to compile it as module (ath3k). config BT_WILINK	tristate "Texas Instruments WiLink7 driver"	depends on TI_ST	help	  This enables the Bluetooth driver for Texas Instrument's BT/FM/GPS	  combo devices. This makes use of shared transport line discipline	  core driver to communicate with the BT core of the combo chip. 	  Say Y here to compile support for Texas Instrument's WiLink7 driver	  into the kernel or say M to compile it as module (btwilink). config BT_QCOMSMD	tristate "Qualcomm SMD based HCI support"	depends on RPMSG || (COMPILE_TEST && RPMSG=n)	depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)	select BT_QCA	help	  Qualcomm SMD based HCI driver.	  This driver is used to bridge HCI data onto the shared memory	  channels to the WCNSS core. 	  Say Y here to compile support for HCI over Qualcomm SMD into the	  kernel or say M to compile as a module. endmenu