## Touchscreen driver configuration#menuconfig INPUT_TOUCHSCREEN bool "Touchscreens" help Say Y here, and a list of supported touchscreens will be displayed. This option doesn't affect the kernel. If unsure, say Y. if INPUT_TOUCHSCREEN config TOUCHSCREEN_PROPERTIES def_tristate INPUT depends on INPUT config TOUCHSCREEN_88PM860X tristate "Marvell 88PM860x touchscreen" depends on MFD_88PM860X help Say Y here if you have a 88PM860x PMIC and want to enable support for the built-in touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called 88pm860x-ts. config TOUCHSCREEN_ADS7846 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens" depends on SPI_MASTER depends on HWMON = n || HWMON help Say Y here if you have a touchscreen interface using the ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller, and your board-specific setup code includes that in its table of SPI devices. If HWMON is selected, and the driver is told the reference voltage on your board, you will also get hwmon interfaces for the voltage (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ads7846. config TOUCHSCREEN_AD7877 tristate "AD7877 based touchscreens" depends on SPI_MASTER help Say Y here if you have a touchscreen interface using the AD7877 controller, and your board-specific initialization code includes that in its table of SPI devices. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7877. config TOUCHSCREEN_AD7879 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" help Say Y here if you want to support a touchscreen interface using the AD7879-1/AD7889-1 controller. You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad7879. config TOUCHSCREEN_AD7879_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_AD7879 && I2C select REGMAP_I2C help Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad7879-i2c. config TOUCHSCREEN_AD7879_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_AD7879 && SPI_MASTER select REGMAP_SPI help Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7879-spi. config TOUCHSCREEN_AR1021_I2C tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF help Say Y here if you have the Microchip AR1020 or AR1021 touchscreen controller chip in your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ar1021_i2c. config TOUCHSCREEN_ATMEL_MXT tristate "Atmel mXT I2C Touchscreen" depends on I2C select FW_LOADER help Say Y here if you have Atmel mXT series I2C touchscreen, such as AT42QT602240/ATMXT224, connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called atmel_mxt_ts. config TOUCHSCREEN_ATMEL_MXT_T37 bool "Support T37 Diagnostic Data" depends on TOUCHSCREEN_ATMEL_MXT depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m) select VIDEOBUF2_VMALLOC help Say Y here if you want support to output data from the T37 Diagnostic Data object using a V4L device. config TOUCHSCREEN_AUO_PIXCIR tristate "AUO in-cell touchscreen using Pixcir ICs" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a AUO display with in-cell touchscreen using Pixcir ICs. If unsure, say N. To compile this driver as a module, choose M here: the module will be called auo-pixcir-ts. config TOUCHSCREEN_BU21013 tristate "BU21013 based touch panel controllers" depends on I2C help Say Y here if you have a bu21013 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called bu21013_ts. config TOUCHSCREEN_CHIPONE_ICN8318 tristate "chipone icn8318 touchscreen controller" depends on GPIOLIB || COMPILE_TEST depends on I2C depends on OF help Say Y here if you have a ChipOne icn8318 based I2C touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called chipone_icn8318. config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a cy8ctmg110 capacitive touchscreen on an AAVA device. If unsure, say N. To compile this driver as a module, choose M here: the module will be called cy8ctmg110_ts. config TOUCHSCREEN_CYTTSP_CORE tristate "Cypress TTSP touchscreen" help Say Y here if you have a touchscreen using controller from the Cypress TrueTouch(tm) Standard Product family connected to your system. You will also need to select appropriate bus connection below. If unsure, say N. To compile this driver as a module, choose M here: the module will be called cyttsp_core. config TOUCHSCREEN_CYTTSP_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_CYTTSP_CORE && I2C help Say Y here if the touchscreen is connected via I2C bus. To compile this driver as a module, choose M here: the module will be called cyttsp_i2c. config TOUCHSCREEN_CYTTSP_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER help Say Y here if the touchscreen is connected via SPI bus. To compile this driver as a module, choose M here: the module will be called cyttsp_spi. config TOUCHSCREEN_CYTTSP4_CORE tristate "Cypress TrueTouch Gen4 Touchscreen Driver" help Core driver for Cypress TrueTouch(tm) Standard Product Generation4 touchscreen controllers. Say Y here if you have a Cypress Gen4 touchscreen. If unsure, say N. To compile this driver as a module, choose M here. config TOUCHSCREEN_CYTTSP4_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_CYTTSP4_CORE && I2C help Say Y here if the touchscreen is connected via I2C bus. To compile this driver as a module, choose M here: the module will be called cyttsp4_i2c. config TOUCHSCREEN_CYTTSP4_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER help Say Y here if the touchscreen is connected via SPI bus. To compile this driver as a module, choose M here: the module will be called cyttsp4_spi. config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X default y help Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. If unsure, say N. To compile this driver as a module, choose M here: the module will be called da9034-ts. config TOUCHSCREEN_DA9052 tristate "Dialog DA9052/DA9053 TSI" depends on PMIC_DA9052 help Say Y here to support the touchscreen found on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs. If unsure, say N. To compile this driver as a module, choose M here: the module will be called da9052_tsi. config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO help Say Y here if you have a Dynapro serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called dynapro. config TOUCHSCREEN_HAMPSHIRE tristate "Hampshire serial touchscreen" select SERIO help Say Y here if you have a Hampshire serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called hampshire. config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C help Say Y here to enable support for I2C connected EETI touch panels. To compile this driver as a module, choose M here: the module will be called eeti_ts. config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. To compile this driver as a module, choose M here: the module will be called egalax_ts. config TOUCHSCREEN_EGALAX_SERIAL tristate "EETI eGalax serial touchscreen" select SERIO help Say Y here to enable support for serial connected EETI eGalax touch panels. To compile this driver as a module, choose M here: the module will be called egalax_ts_serial. config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one installed in Lifebook P series laptop) connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called fujitsu-ts. config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your system. It also supports 5-finger chip models, which can be found on ARM tablets, like Wexler TAB7200 and MSI Primo73. If unsure, say N. To compile this driver as a module, choose M here: the module will be called goodix. config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C help Say Y here if you have a ILI210X based touchscreen controller. This driver supports models ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of chipsets can be found in Amazon Kindle Fire touchscreens. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ili210x. config TOUCHSCREEN_IPROC tristate "IPROC touch panel driver support" depends on ARCH_BCM_IPROC || COMPILE_TEST help Say Y here if you want to add support for the IPROC touch controller to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called bcm_iproc_tsc. config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" depends on ARCH_S3C24XX || SAMSUNG_DEV_TS depends on S3C_ADC help Say Y here if you have the s3c2410 touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called s3c2410_ts. config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO help Say Y here if you have the Gunze AHL-51 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called gunze. config TOUCHSCREEN_EKTF2127 tristate "Elan eKTF2127 I2C touchscreen" depends on I2C help Say Y here if you have an Elan eKTF2127 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ektf2127. config TOUCHSCREEN_ELAN tristate "Elan eKTH I2C touchscreen" depends on I2C help Say Y here if you have an Elan eKTH I2C touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called elants_i2c. config TOUCHSCREEN_ELO tristate "Elo serial touchscreens" select SERIO help Say Y here if you have an Elo serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called elo. config TOUCHSCREEN_WACOM_W8001 tristate "Wacom W8001 penabled serial touchscreen" select SERIO help Say Y here if you have an Wacom W8001 penabled serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called wacom_w8001. config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C help Say Y here if you want to use the I2C version of the Wacom Pen Tablet. If unsure, say N. To compile this driver as a module, choose M here: the module will be called wacom_i2c. config TOUCHSCREEN_LPC32XX tristate "LPC32XX touchscreen controller" depends on ARCH_LPC32XX help Say Y here if you have a LPC32XX device and want to support the built-in touchscreen. To compile this driver as a module, choose M here: the module will be called lpc32xx_ts. config TOUCHSCREEN_MAX11801 tristate "MAX11801 based touchscreens" depends on I2C help Say Y here if you have a MAX11801 based touchscreen controller. If unsure, say N. To compile this driver as a module, choose M here: the module will be called max11801_ts. config TOUCHSCREEN_MCS5000 tristate "MELFAS MCS-5000 touchscreen" depends on I2C help Say Y here if you have the MELFAS MCS-5000 touchscreen controller chip in your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called mcs5000_ts. config TOUCHSCREEN_MMS114 tristate "MELFAS MMS114 touchscreen" depends on I2C help Say Y here if you have the MELFAS MMS114 touchscreen controller chip in your system. If unsure, say N. Lines 1–500 of 1249. Load more
# # Touchscreen driver configuration # menuconfig INPUT_TOUCHSCREEN bool "Touchscreens" help Say Y here, and a list of supported touchscreens will be displayed. This option doesn't affect the kernel. If unsure, say Y. if INPUT_TOUCHSCREEN config TOUCHSCREEN_PROPERTIES def_tristate INPUT depends on INPUT config TOUCHSCREEN_88PM860X tristate "Marvell 88PM860x touchscreen" depends on MFD_88PM860X help Say Y here if you have a 88PM860x PMIC and want to enable support for the built-in touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called 88pm860x-ts. config TOUCHSCREEN_ADS7846 tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens" depends on SPI_MASTER depends on HWMON = n || HWMON help Say Y here if you have a touchscreen interface using the ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller, and your board-specific setup code includes that in its table of SPI devices. If HWMON is selected, and the driver is told the reference voltage on your board, you will also get hwmon interfaces for the voltage (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ads7846. config TOUCHSCREEN_AD7877 tristate "AD7877 based touchscreens" depends on SPI_MASTER help Say Y here if you have a touchscreen interface using the AD7877 controller, and your board-specific initialization code includes that in its table of SPI devices. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7877. config TOUCHSCREEN_AD7879 tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface" help Say Y here if you want to support a touchscreen interface using the AD7879-1/AD7889-1 controller. You should select a bus connection too. To compile this driver as a module, choose M here: the module will be called ad7879. config TOUCHSCREEN_AD7879_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_AD7879 && I2C select REGMAP_I2C help Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus. To compile this driver as a module, choose M here: the module will be called ad7879-i2c. config TOUCHSCREEN_AD7879_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_AD7879 && SPI_MASTER select REGMAP_SPI help Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus. If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the module will be called ad7879-spi. config TOUCHSCREEN_AR1021_I2C tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF help Say Y here if you have the Microchip AR1020 or AR1021 touchscreen controller chip in your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ar1021_i2c. config TOUCHSCREEN_ATMEL_MXT tristate "Atmel mXT I2C Touchscreen" depends on I2C select FW_LOADER help Say Y here if you have Atmel mXT series I2C touchscreen, such as AT42QT602240/ATMXT224, connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called atmel_mxt_ts. config TOUCHSCREEN_ATMEL_MXT_T37 bool "Support T37 Diagnostic Data" depends on TOUCHSCREEN_ATMEL_MXT depends on VIDEO_V4L2=y || (TOUCHSCREEN_ATMEL_MXT=m && VIDEO_V4L2=m) select VIDEOBUF2_VMALLOC help Say Y here if you want support to output data from the T37 Diagnostic Data object using a V4L device. config TOUCHSCREEN_AUO_PIXCIR tristate "AUO in-cell touchscreen using Pixcir ICs" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a AUO display with in-cell touchscreen using Pixcir ICs. If unsure, say N. To compile this driver as a module, choose M here: the module will be called auo-pixcir-ts. config TOUCHSCREEN_BU21013 tristate "BU21013 based touch panel controllers" depends on I2C help Say Y here if you have a bu21013 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called bu21013_ts. config TOUCHSCREEN_CHIPONE_ICN8318 tristate "chipone icn8318 touchscreen controller" depends on GPIOLIB || COMPILE_TEST depends on I2C depends on OF help Say Y here if you have a ChipOne icn8318 based I2C touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called chipone_icn8318. config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have a cy8ctmg110 capacitive touchscreen on an AAVA device. If unsure, say N. To compile this driver as a module, choose M here: the module will be called cy8ctmg110_ts. config TOUCHSCREEN_CYTTSP_CORE tristate "Cypress TTSP touchscreen" help Say Y here if you have a touchscreen using controller from the Cypress TrueTouch(tm) Standard Product family connected to your system. You will also need to select appropriate bus connection below. If unsure, say N. To compile this driver as a module, choose M here: the module will be called cyttsp_core. config TOUCHSCREEN_CYTTSP_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_CYTTSP_CORE && I2C help Say Y here if the touchscreen is connected via I2C bus. To compile this driver as a module, choose M here: the module will be called cyttsp_i2c. config TOUCHSCREEN_CYTTSP_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER help Say Y here if the touchscreen is connected via SPI bus. To compile this driver as a module, choose M here: the module will be called cyttsp_spi. config TOUCHSCREEN_CYTTSP4_CORE tristate "Cypress TrueTouch Gen4 Touchscreen Driver" help Core driver for Cypress TrueTouch(tm) Standard Product Generation4 touchscreen controllers. Say Y here if you have a Cypress Gen4 touchscreen. If unsure, say N. To compile this driver as a module, choose M here. config TOUCHSCREEN_CYTTSP4_I2C tristate "support I2C bus connection" depends on TOUCHSCREEN_CYTTSP4_CORE && I2C help Say Y here if the touchscreen is connected via I2C bus. To compile this driver as a module, choose M here: the module will be called cyttsp4_i2c. config TOUCHSCREEN_CYTTSP4_SPI tristate "support SPI bus connection" depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER help Say Y here if the touchscreen is connected via SPI bus. To compile this driver as a module, choose M here: the module will be called cyttsp4_spi. config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X default y help Say Y here to enable the support for the touchscreen found on Dialog Semiconductor DA9034 PMIC. If unsure, say N. To compile this driver as a module, choose M here: the module will be called da9034-ts. config TOUCHSCREEN_DA9052 tristate "Dialog DA9052/DA9053 TSI" depends on PMIC_DA9052 help Say Y here to support the touchscreen found on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs. If unsure, say N. To compile this driver as a module, choose M here: the module will be called da9052_tsi. config TOUCHSCREEN_DYNAPRO tristate "Dynapro serial touchscreen" select SERIO help Say Y here if you have a Dynapro serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called dynapro. config TOUCHSCREEN_HAMPSHIRE tristate "Hampshire serial touchscreen" select SERIO help Say Y here if you have a Hampshire serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called hampshire. config TOUCHSCREEN_EETI tristate "EETI touchscreen panel support" depends on I2C help Say Y here to enable support for I2C connected EETI touch panels. To compile this driver as a module, choose M here: the module will be called eeti_ts. config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. To compile this driver as a module, choose M here: the module will be called egalax_ts. config TOUCHSCREEN_EGALAX_SERIAL tristate "EETI eGalax serial touchscreen" select SERIO help Say Y here to enable support for serial connected EETI eGalax touch panels. To compile this driver as a module, choose M here: the module will be called egalax_ts_serial. config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO help Say Y here if you have the Fujitsu touchscreen (such as one installed in Lifebook P series laptop) connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called fujitsu-ts. config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" depends on I2C depends on GPIOLIB || COMPILE_TEST help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your system. It also supports 5-finger chip models, which can be found on ARM tablets, like Wexler TAB7200 and MSI Primo73. If unsure, say N. To compile this driver as a module, choose M here: the module will be called goodix. config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C help Say Y here if you have a ILI210X based touchscreen controller. This driver supports models ILI2102, ILI2102s, ILI2103, ILI2103s and ILI2105. Such kind of chipsets can be found in Amazon Kindle Fire touchscreens. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ili210x. config TOUCHSCREEN_IPROC tristate "IPROC touch panel driver support" depends on ARCH_BCM_IPROC || COMPILE_TEST help Say Y here if you want to add support for the IPROC touch controller to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called bcm_iproc_tsc. config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" depends on ARCH_S3C24XX || SAMSUNG_DEV_TS depends on S3C_ADC help Say Y here if you have the s3c2410 touchscreen. If unsure, say N. To compile this driver as a module, choose M here: the module will be called s3c2410_ts. config TOUCHSCREEN_GUNZE tristate "Gunze AHL-51S touchscreen" select SERIO help Say Y here if you have the Gunze AHL-51 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called gunze. config TOUCHSCREEN_EKTF2127 tristate "Elan eKTF2127 I2C touchscreen" depends on I2C help Say Y here if you have an Elan eKTF2127 touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called ektf2127. config TOUCHSCREEN_ELAN tristate "Elan eKTH I2C touchscreen" depends on I2C help Say Y here if you have an Elan eKTH I2C touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called elants_i2c. config TOUCHSCREEN_ELO tristate "Elo serial touchscreens" select SERIO help Say Y here if you have an Elo serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called elo. config TOUCHSCREEN_WACOM_W8001 tristate "Wacom W8001 penabled serial touchscreen" select SERIO help Say Y here if you have an Wacom W8001 penabled serial touchscreen connected to your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called wacom_w8001. config TOUCHSCREEN_WACOM_I2C tristate "Wacom Tablet support (I2C)" depends on I2C help Say Y here if you want to use the I2C version of the Wacom Pen Tablet. If unsure, say N. To compile this driver as a module, choose M here: the module will be called wacom_i2c. config TOUCHSCREEN_LPC32XX tristate "LPC32XX touchscreen controller" depends on ARCH_LPC32XX help Say Y here if you have a LPC32XX device and want to support the built-in touchscreen. To compile this driver as a module, choose M here: the module will be called lpc32xx_ts. config TOUCHSCREEN_MAX11801 tristate "MAX11801 based touchscreens" depends on I2C help Say Y here if you have a MAX11801 based touchscreen controller. If unsure, say N. To compile this driver as a module, choose M here: the module will be called max11801_ts. config TOUCHSCREEN_MCS5000 tristate "MELFAS MCS-5000 touchscreen" depends on I2C help Say Y here if you have the MELFAS MCS-5000 touchscreen controller chip in your system. If unsure, say N. To compile this driver as a module, choose M here: the module will be called mcs5000_ts. config TOUCHSCREEN_MMS114 tristate "MELFAS MMS114 touchscreen" depends on I2C help Say Y here if you have the MELFAS MMS114 touchscreen controller chip in your system. If unsure, say N.