## Network configuration# menuconfig NET	bool "Networking support"	select NLATTR	select GENERIC_NET_UTILS	select BPF	---help---	  Unless you really know what you are doing, you should say Y here.	  The reason is that some programs need kernel networking support even	  when running on a stand-alone machine that isn't connected to any	  other computer.	  	  If you are upgrading from an older kernel, you	  should consider updating your networking tools too because changes	  in the kernel and the tools often go hand in hand. The tools are	  contained in the package net-tools, the location and version number	  of which are given in <file:Documentation/Changes>. 	  For a general introduction to Linux networking, it is highly	  recommended to read the NET-HOWTO, available from	  <http://www.tldp.org/docs.html#howto>. if NET config WANT_COMPAT_NETLINK_MESSAGES	bool	help	  This option can be selected by other options that need compat	  netlink messages. config COMPAT_NETLINK_MESSAGES	def_bool y	depends on COMPAT	depends on WEXT_CORE || WANT_COMPAT_NETLINK_MESSAGES	help	  This option makes it possible to send different netlink messages	  to tasks depending on whether the task is a compat task or not. To	  achieve this, you need to set skb_shinfo(skb)->frag_list to the	  compat skb before sending the skb, the netlink code will sort out	  which message to actually pass to the task. 	  Newly written code should NEVER need this option but do	  compat-independent messages instead! config NET_INGRESS	bool config NET_EGRESS	bool menu "Networking options" source "net/packet/Kconfig"source "net/unix/Kconfig"source "net/tls/Kconfig"source "net/xfrm/Kconfig"source "net/iucv/Kconfig"source "net/smc/Kconfig" config INET	bool "TCP/IP networking"	select CRYPTO	select CRYPTO_AES	---help---	  These are the protocols used on the Internet and on most local	  Ethernets. It is highly recommended to say Y here (this will enlarge	  your kernel by about 400 KB), since some programs (e.g. the X window	  system) use TCP/IP even if your machine is not connected to any	  other computer. You will get the so-called loopback device which	  allows you to ping yourself (great fun, that!). 	  For an excellent introduction to Linux networking, please read the	  Linux Networking HOWTO, available from	  <http://www.tldp.org/docs.html#howto>. 	  If you say Y here and also to "/proc file system support" and	  "Sysctl support" below, you can change various aspects of the	  behavior of the TCP/IP code by writing to the (virtual) files in	  /proc/sys/net/ipv4/*; the options are explained in the file	  <file:Documentation/networking/ip-sysctl.txt>. 	  Short answer: say Y. if INETsource "net/ipv4/Kconfig"source "net/ipv6/Kconfig"source "net/netlabel/Kconfig" endif # if INET config NETWORK_SECMARK	bool "Security Marking"	help	  This enables security marking of network packets, similar	  to nfmark, but designated for security purposes.	  If you are unsure how to answer this question, answer N. config NET_PTP_CLASSIFY	def_bool n config NETWORK_PHY_TIMESTAMPING	bool "Timestamping in PHY devices"	select NET_PTP_CLASSIFY	help	  This allows timestamping of network packets by PHYs with	  hardware timestamping capabilities. This option adds some	  overhead in the transmit and receive paths. 	  If you are unsure how to answer this question, answer N. menuconfig NETFILTER	bool "Network packet filtering framework (Netfilter)"	---help---	  Netfilter is a framework for filtering and mangling network packets	  that pass through your Linux box. 	  The most common use of packet filtering is to run your Linux box as	  a firewall protecting a local network from the Internet. The type of	  firewall provided by this kernel support is called a "packet	  filter", which means that it can reject individual network packets	  based on type, source, destination etc. The other kind of firewall,	  a "proxy-based" one, is more secure but more intrusive and more	  bothersome to set up; it inspects the network traffic much more	  closely, modifies it and has knowledge about the higher level	  protocols, which a packet filter lacks. Moreover, proxy-based	  firewalls often require changes to the programs running on the local	  clients. Proxy-based firewalls don't need support by the kernel, but	  they are often combined with a packet filter, which only works if	  you say Y here. 	  You should also say Y here if you intend to use your Linux box as	  the gateway to the Internet for a local network of machines without	  globally valid IP addresses. This is called "masquerading": if one	  of the computers on your local network wants to send something to	  the outside, your box can "masquerade" as that computer, i.e. it	  forwards the traffic to the intended outside destination, but	  modifies the packets to make it look like they came from the	  firewall box itself. It works both ways: if the outside host	  replies, the Linux box will silently forward the traffic to the	  correct local computer. This way, the computers on your local net	  are completely invisible to the outside world, even though they can	  reach the outside and can receive replies. It is even possible to	  run globally visible servers from within a masqueraded local network	  using a mechanism called portforwarding. Masquerading is also often	  called NAT (Network Address Translation). 	  Another use of Netfilter is in transparent proxying: if a machine on	  the local network tries to connect to an outside host, your Linux	  box can transparently forward the traffic to a local server,	  typically a caching proxy server. 	  Yet another use of Netfilter is building a bridging firewall. Using	  a bridge with Network packet filtering enabled makes iptables "see"	  the bridged traffic. For filtering on the lower network and Ethernet	  protocols over the bridge, use ebtables (under bridge netfilter	  configuration). 	  Various modules exist for netfilter which replace the previous	  masquerading (ipmasqadm), packet filtering (ipchains), transparent	  proxying, and portforwarding mechanisms. Please see	  <file:Documentation/Changes> under "iptables" for the location of	  these packages. if NETFILTER config NETFILTER_DEBUG	bool "Network packet filtering debugging"	depends on NETFILTER	help	  You can say Y here if you want to get additional messages useful in	  debugging the netfilter code. config NETFILTER_ADVANCED	bool "Advanced netfilter configuration"	depends on NETFILTER	default y	help	  If you say Y here you can select between all the netfilter modules.	  If you say N the more unusual ones will not be shown and the	  basic ones needed by most people will default to 'M'. 	  If unsure, say Y. config BRIDGE_NETFILTER	tristate "Bridged IP/ARP packets filtering"	depends on BRIDGE	depends on NETFILTER && INET	depends on NETFILTER_ADVANCED	default m	---help---	  Enabling this option will let arptables resp. iptables see bridged	  ARP resp. IP traffic. If you want a bridging firewall, you probably	  want this option enabled.	  Enabling or disabling this option doesn't enable or disable	  ebtables. 	  If unsure, say N. source "net/netfilter/Kconfig"source "net/ipv4/netfilter/Kconfig"source "net/ipv6/netfilter/Kconfig"source "net/decnet/netfilter/Kconfig"source "net/bridge/netfilter/Kconfig" endif source "net/dccp/Kconfig"source "net/sctp/Kconfig"source "net/rds/Kconfig"source "net/tipc/Kconfig"source "net/atm/Kconfig"source "net/l2tp/Kconfig"source "net/802/Kconfig"source "net/bridge/Kconfig"source "net/dsa/Kconfig"source "net/8021q/Kconfig"source "net/decnet/Kconfig"source "net/llc/Kconfig"source "net/ipx/Kconfig"source "drivers/net/appletalk/Kconfig"source "net/x25/Kconfig"source "net/lapb/Kconfig"source "net/phonet/Kconfig"source "net/6lowpan/Kconfig"source "net/ieee802154/Kconfig"source "net/mac802154/Kconfig"source "net/sched/Kconfig"source "net/dcb/Kconfig"source "net/dns_resolver/Kconfig"source "net/batman-adv/Kconfig"source "net/openvswitch/Kconfig"source "net/vmw_vsock/Kconfig"source "net/netlink/Kconfig"source "net/mpls/Kconfig"source "net/hsr/Kconfig"source "net/switchdev/Kconfig"source "net/l3mdev/Kconfig"source "net/qrtr/Kconfig"source "net/ncsi/Kconfig" config RPS	bool	depends on SMP && SYSFS	default y config RFS_ACCEL	bool	depends on RPS	select CPU_RMAP	default y config XPS	bool	depends on SMP	default y config HWBM       bool config CGROUP_NET_PRIO	bool "Network priority cgroup"	depends on CGROUPS	select SOCK_CGROUP_DATA	---help---	  Cgroup subsystem for use in assigning processes to network priorities on	  a per-interface basis. config CGROUP_NET_CLASSID	bool "Network classid cgroup"	depends on CGROUPS	select SOCK_CGROUP_DATA	---help---	  Cgroup subsystem for use as general purpose socket classid marker that is	  being used in cls_cgroup and for netfilter matching. config NET_RX_BUSY_POLL	bool	default y config BQL	bool	depends on SYSFS	select DQL	default y config BPF_JIT	bool "enable BPF Just In Time compiler"	depends on HAVE_CBPF_JIT || HAVE_EBPF_JIT	depends on MODULES	---help---	  Berkeley Packet Filter filtering capabilities are normally handled	  by an interpreter. This option allows kernel to generate a native	  code when filter is loaded in memory. This should speedup	  packet sniffing (libpcap/tcpdump). 	  Note, admin should enable this feature changing:	  /proc/sys/net/core/bpf_jit_enable	  /proc/sys/net/core/bpf_jit_harden   (optional)	  /proc/sys/net/core/bpf_jit_kallsyms (optional) config NET_FLOW_LIMIT	bool	depends on RPS	default y	---help---	  The network stack has to drop packets when a receive processing CPU's	  backlog reaches netdev_max_backlog. If a few out of many active flows	  generate the vast majority of load, drop their traffic earlier to	  maintain capacity for the other flows. This feature provides servers	  with many clients some protection against DoS by a single (spoofed)	  flow that greatly exceeds average workload. menu "Network testing" config NET_PKTGEN	tristate "Packet Generator (USE WITH CAUTION)"	depends on INET && PROC_FS	---help---	  This module will inject preconfigured packets, at a configurable	  rate, out of a given interface.  It is used for network interface	  stress testing and performance analysis.  If you don't understand	  what was just said, you don't need it: say N. 	  Documentation on how to use the packet generator can be found	  at <file:Documentation/networking/pktgen.txt>. 	  To compile this code as a module, choose M here: the	  module will be called pktgen. config NET_TCPPROBE	tristate "TCP connection probing"	depends on INET && PROC_FS && KPROBES	---help---	This module allows for capturing the changes to TCP connection	state in response to incoming packets. It is used for debugging	TCP congestion avoidance modules. If you don't understand	what was just said, you don't need it: say N. 	Documentation on how to use TCP connection probing can be found	at:		  http://www.linuxfoundation.org/collaborate/workgroups/networking/tcpprobe 	To compile this code as a module, choose M here: the	module will be called tcp_probe. config NET_DROP_MONITOR	tristate "Network packet drop alerting service"	depends on INET && TRACEPOINTS	---help---	This feature provides an alerting service to userspace in the	event that packets are discarded in the network stack.  Alerts	are broadcast via netlink socket to any listening user space	process.  If you don't need network drop alerts, or if you are ok	just checking the various proc files and other utilities for	drop statistics, say N here. endmenu endmenu source "net/ax25/Kconfig"source "net/can/Kconfig"source "net/irda/Kconfig"source "net/bluetooth/Kconfig"source "net/rxrpc/Kconfig"source "net/kcm/Kconfig"source "net/strparser/Kconfig" config FIB_RULES	bool menuconfig WIRELESS	bool "Wireless"	depends on !S390	default y if WIRELESS source "net/wireless/Kconfig"source "net/mac80211/Kconfig" endif # WIRELESS source "net/wimax/Kconfig" source "net/rfkill/Kconfig"source "net/9p/Kconfig"source "net/caif/Kconfig"source "net/ceph/Kconfig"source "net/nfc/Kconfig"source "net/psample/Kconfig"source "net/ife/Kconfig" config LWTUNNEL	bool "Network light weight tunnels"	---help---	  This feature provides an infrastructure to support light weight	  tunnels like mpls. There is no netdevice associated with a light	  weight tunnel endpoint. Tunnel encapsulation parameters are stored	  with light weight tunnel state associated with fib routes. config LWTUNNEL_BPF	bool "Execute BPF program as route nexthop action"	depends on LWTUNNEL	default y if LWTUNNEL=y	---help---	  Allows to run BPF programs as a nexthop action following a route	  lookup for incoming and outgoing packets. config DST_CACHE	bool	default n config GRO_CELLS	bool	default n config NET_DEVLINK	tristate "Network physical/parent device Netlink interface"	help	  Network physical/parent device Netlink interface provides	  infrastructure to support access to physical chip-wide config and	  monitoring. config MAY_USE_DEVLINK	tristate	default m if NET_DEVLINK=m	default y if NET_DEVLINK=y || NET_DEVLINK=n	help	  Drivers using the devlink infrastructure should have a dependency	  on MAY_USE_DEVLINK to ensure they do not cause link errors when	  devlink is a loadable module and the driver using it is built-in. endif   # if NET # Used by archs to tell that they support BPF JIT compiler plus which flavour.# Only one of the two can be selected for a specific arch since eBPF JIT supersedes# the cBPF JIT. # Classic BPF JIT (cBPF)config HAVE_CBPF_JIT	bool # Extended BPF JIT (eBPF)config HAVE_EBPF_JIT	bool