/* * Copyright 2010 Tilera Corporation. All Rights Reserved. * *   This program is free software; you can redistribute it and/or *   modify it under the terms of the GNU General Public License *   as published by the Free Software Foundation, version 2. * *   This program is distributed in the hope that it will be useful, but *   WITHOUT ANY WARRANTY; without even the implied warranty of *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or *   NON INFRINGEMENT.  See the GNU General Public License for *   more details. */ #ifndef _ASM_TILE_PROCESSOR_H#define _ASM_TILE_PROCESSOR_H #include <arch/chip.h> #ifndef __ASSEMBLY__ /* * NOTE: we don't include <linux/ptrace.h> or <linux/percpu.h> as one * normally would, due to #include dependencies. */#include <linux/types.h>#include <asm/ptrace.h>#include <asm/percpu.h> #include <arch/spr_def.h> struct task_struct;struct thread_struct; typedef struct {	unsigned long seg;} mm_segment_t; /* * Default implementation of macro that returns current * instruction pointer ("program counter"). */void *current_text_addr(void); #if CHIP_HAS_TILE_DMA()/* Capture the state of a suspended DMA. */struct tile_dma_state {	int enabled;	unsigned long src;	unsigned long dest;	unsigned long strides;	unsigned long chunk_size;	unsigned long src_chunk;	unsigned long dest_chunk;	unsigned long byte;	unsigned long status;}; /* * A mask of the DMA status register for selecting only the 'running' * and 'done' bits. */#define DMA_STATUS_MASK \  (SPR_DMA_STATUS__RUNNING_MASK | SPR_DMA_STATUS__DONE_MASK)#endif /* * Track asynchronous TLB events (faults and access violations) * that occur while we are in kernel mode from DMA or the SN processor. */struct async_tlb {	short fault_num;         /* original fault number; 0 if none */	char is_fault;           /* was it a fault (vs an access violation) */	char is_write;           /* for fault: was it caused by a write? */	unsigned long address;   /* what address faulted? */}; #ifdef CONFIG_HARDWALLstruct hardwall_info;struct hardwall_task {	/* Which hardwall is this task tied to? (or NULL if none) */	struct hardwall_info *info;	/* Chains this task into the list at info->task_head. */	struct list_head list;};#ifdef __tilepro__#define HARDWALL_TYPES 1   /* udn */#else#define HARDWALL_TYPES 3   /* udn, idn, and ipi */#endif#endif struct thread_struct {	/* kernel stack pointer */	unsigned long  ksp;	/* kernel PC */	unsigned long  pc;	/* starting user stack pointer (for page migration) */	unsigned long  usp0;	/* pid of process that created this one */	pid_t creator_pid;#if CHIP_HAS_TILE_DMA()	/* DMA info for suspended threads (byte == 0 means no DMA state) */	struct tile_dma_state tile_dma_state;#endif	/* User EX_CONTEXT registers */	unsigned long ex_context[2];	/* User SYSTEM_SAVE registers */	unsigned long system_save[4];	/* User interrupt mask */	unsigned long long interrupt_mask;	/* User interrupt-control 0 state */	unsigned long intctrl_0;	/* Any other miscellaneous processor state bits */	unsigned long proc_status;#if !CHIP_HAS_FIXED_INTVEC_BASE()	/* Interrupt base for PL0 interrupts */	unsigned long interrupt_vector_base;#endif	/* Tile cache retry fifo high-water mark */	unsigned long tile_rtf_hwm;#if CHIP_HAS_DSTREAM_PF()	/* Data stream prefetch control */	unsigned long dstream_pf;#endif#ifdef CONFIG_HARDWALL	/* Hardwall information for various resources. */	struct hardwall_task hardwall[HARDWALL_TYPES];#endif#if CHIP_HAS_TILE_DMA()	/* Async DMA TLB fault information */	struct async_tlb dma_async_tlb;#endif}; #endif /* !__ASSEMBLY__ */ /* * Start with "sp" this many bytes below the top of the kernel stack. * This allows us to be cache-aware when handling the initial save * of the pt_regs value to the stack. */#define STACK_TOP_DELTA 64 /* * When entering the kernel via a fault, start with the top of the * pt_regs structure this many bytes below the top of the page. * This aligns the pt_regs structure optimally for cache-line access. */#ifdef __tilegx__#define KSTK_PTREGS_GAP  48#else#define KSTK_PTREGS_GAP  56#endif #ifndef __ASSEMBLY__ #ifdef __tilegx__#define TASK_SIZE_MAX		(_AC(1, UL) << (MAX_VA_WIDTH - 1))#else#define TASK_SIZE_MAX		PAGE_OFFSET#endif /* TASK_SIZE and related variables are always checked in "current" context. */#ifdef CONFIG_COMPAT#define COMPAT_TASK_SIZE	(1UL << 31)#define TASK_SIZE		((current_thread_info()->status & TS_COMPAT) ?\				 COMPAT_TASK_SIZE : TASK_SIZE_MAX)#else#define TASK_SIZE		TASK_SIZE_MAX#endif #define VDSO_BASE	((unsigned long)current->active_mm->context.vdso_base)#define VDSO_SYM(x)	(VDSO_BASE + (unsigned long)(x)) #define STACK_TOP		TASK_SIZE /* STACK_TOP_MAX is used temporarily in execve and should not check COMPAT. */#define STACK_TOP_MAX		TASK_SIZE_MAX /* * This decides where the kernel will search for a free chunk of vm * space during mmap's, if it is using bottom-up mapping. */#define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3)) #define HAVE_ARCH_PICK_MMAP_LAYOUT #define INIT_THREAD {                                                   \	.ksp = (unsigned long)init_stack + THREAD_SIZE - STACK_TOP_DELTA, \	.interrupt_mask = -1ULL                                         \} /* Kernel stack top for the task that first boots on this cpu. */DECLARE_PER_CPU(unsigned long, boot_sp); /* PC to boot from on this cpu. */DECLARE_PER_CPU(unsigned long, boot_pc); /* Do necessary setup to start up a newly executed thread. */static inline void start_thread(struct pt_regs *regs,				unsigned long pc, unsigned long usp){	regs->pc = pc;	regs->sp = usp;	single_step_execve();} /* Free all resources held by a thread. */static inline void release_thread(struct task_struct *dead_task){	/* Nothing for now */} extern void prepare_exit_to_usermode(struct pt_regs *regs, u32 flags); unsigned long get_wchan(struct task_struct *p); /* Return initial ksp value for given task. */#define task_ksp0(task) \	((unsigned long)(task)->stack + THREAD_SIZE - STACK_TOP_DELTA) /* Return some info about the user process TASK. */#define task_pt_regs(task) \	((struct pt_regs *)(task_ksp0(task) - KSTK_PTREGS_GAP) - 1)#define current_pt_regs()                                   \	((struct pt_regs *)((stack_pointer | (THREAD_SIZE - 1)) - \			    STACK_TOP_DELTA - (KSTK_PTREGS_GAP - 1)) - 1)#define task_sp(task)	(task_pt_regs(task)->sp)#define task_pc(task)	(task_pt_regs(task)->pc)/* Aliases for pc and sp (used in fs/proc/array.c) */#define KSTK_EIP(task)	task_pc(task)#define KSTK_ESP(task)	task_sp(task) /* Fine-grained unaligned JIT support */#define GET_UNALIGN_CTL(tsk, adr)	get_unalign_ctl((tsk), (adr))#define SET_UNALIGN_CTL(tsk, val)	set_unalign_ctl((tsk), (val)) extern int get_unalign_ctl(struct task_struct *tsk, unsigned long adr);extern int set_unalign_ctl(struct task_struct *tsk, unsigned int val); /* Standard format for printing registers and other word-size data. */#ifdef __tilegx__# define REGFMT "0x%016lx"#else# define REGFMT "0x%08lx"#endif /* * Do some slow action (e.g. read a slow SPR). * Note that this must also have compiler-barrier semantics since * it may be used in a busy loop reading memory. */static inline void cpu_relax(void){	__insn_mfspr(SPR_PASS);	barrier();} /* Info on this processor (see fs/proc/cpuinfo.c) */struct seq_operations;extern const struct seq_operations cpuinfo_op; /* Provide information about the chip model. */extern char chip_model[64]; /* Data on which physical memory controller corresponds to which NUMA node. */extern int node_controller[]; /* Does the heap allocator return hash-for-home pages by default? */extern int hash_default; /* Should kernel stack pages be hash-for-home? */extern int kstack_hash; /* Does MAP_ANONYMOUS return hash-for-home pages by default? */#define uheap_hash hash_default  /* Are we using huge pages in the TLB for kernel data? */extern int kdata_huge; /* Support standard Linux prefetching. */#define ARCH_HAS_PREFETCH#define prefetch(x) __builtin_prefetch(x)#define PREFETCH_STRIDE CHIP_L2_LINE_SIZE() /* Bring a value into the L1D, faulting the TLB if necessary. */#ifdef __tilegx__#define prefetch_L1(x) __insn_prefetch_l1_fault((void *)(x))#else#define prefetch_L1(x) __insn_prefetch_L1((void *)(x))#endif #else /* __ASSEMBLY__ */ /* Do some slow action (e.g. read a slow SPR). */#define CPU_RELAX       mfspr zero, SPR_PASS #endif /* !__ASSEMBLY__ */ /* Assembly code assumes that the PL is in the low bits. */#if SPR_EX_CONTEXT_1_1__PL_SHIFT != 0# error Fix assembly assumptions about PL#endif /* We sometimes use these macros for EX_CONTEXT_0_1 as well. */#if SPR_EX_CONTEXT_1_1__PL_SHIFT != SPR_EX_CONTEXT_0_1__PL_SHIFT || \    SPR_EX_CONTEXT_1_1__PL_RMASK != SPR_EX_CONTEXT_0_1__PL_RMASK || \    SPR_EX_CONTEXT_1_1__ICS_SHIFT != SPR_EX_CONTEXT_0_1__ICS_SHIFT || \    SPR_EX_CONTEXT_1_1__ICS_RMASK != SPR_EX_CONTEXT_0_1__ICS_RMASK# error Fix assumptions that EX1 macros work for both PL0 and PL1#endif /* Allow pulling apart and recombining the PL and ICS bits in EX_CONTEXT. */#define EX1_PL(ex1) \  (((ex1) >> SPR_EX_CONTEXT_1_1__PL_SHIFT) & SPR_EX_CONTEXT_1_1__PL_RMASK)#define EX1_ICS(ex1) \  (((ex1) >> SPR_EX_CONTEXT_1_1__ICS_SHIFT) & SPR_EX_CONTEXT_1_1__ICS_RMASK)#define PL_ICS_EX1(pl, ics) \  (((pl) << SPR_EX_CONTEXT_1_1__PL_SHIFT) | \   ((ics) << SPR_EX_CONTEXT_1_1__ICS_SHIFT)) /* * Provide symbolic constants for PLs. */#define USER_PL 0#if CONFIG_KERNEL_PL == 2#define GUEST_PL 1#endif#define KERNEL_PL CONFIG_KERNEL_PL /* SYSTEM_SAVE_K_0 holds the current cpu number ORed with ksp0. */#ifdef __tilegx__#define CPU_SHIFT 48#if CHIP_VA_WIDTH() > CPU_SHIFT# error Too many VA bits!#endif#define MAX_CPU_ID ((1 << (64 - CPU_SHIFT)) - 1)#define raw_smp_processor_id() \	((int)(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) >> CPU_SHIFT))#define get_current_ksp0() \	((unsigned long)(((long)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) << \			  (64 - CPU_SHIFT)) >> (64 - CPU_SHIFT)))#define next_current_ksp0(task) ({ \	unsigned long __ksp0 = task_ksp0(task) & ((1UL << CPU_SHIFT) - 1); \	unsigned long __cpu = (long)raw_smp_processor_id() << CPU_SHIFT; \	__ksp0 | __cpu; \})#else#define LOG2_NR_CPU_IDS 6#define MAX_CPU_ID ((1 << LOG2_NR_CPU_IDS) - 1)#define raw_smp_processor_id() \	((int)__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & MAX_CPU_ID)#define get_current_ksp0() \	(__insn_mfspr(SPR_SYSTEM_SAVE_K_0) & ~MAX_CPU_ID)#define next_current_ksp0(task) ({ \	unsigned long __ksp0 = task_ksp0(task); \	int __cpu = raw_smp_processor_id(); \	BUG_ON(__ksp0 & MAX_CPU_ID); \	__ksp0 | __cpu; \})#endif#if CONFIG_NR_CPUS > (MAX_CPU_ID + 1)# error Too many cpus!#endif #endif /* _ASM_TILE_PROCESSOR_H */