/* * NTP state machine interfaces and logic. * * This code was mainly moved from kernel/timer.c and kernel/time.c * Please see those files for relevant copyright info and historical * changelogs. */#include <linux/capability.h>#include <linux/clocksource.h>#include <linux/workqueue.h>#include <linux/hrtimer.h>#include <linux/jiffies.h>#include <linux/math64.h>#include <linux/timex.h>#include <linux/time.h>#include <linux/mm.h>#include <linux/module.h>#include <linux/rtc.h> #include "ntp_internal.h" /* * NTP timekeeping variables: * * Note: All of the NTP state is protected by the timekeeping locks. */ /* USER_HZ period (usecs): */unsigned long tick_usec = TICK_USEC; /* SHIFTED_HZ period (nsecs): */unsigned long tick_nsec; static u64 tick_length;static u64 tick_length_base; #define SECS_PER_DAY 86400#define MAX_TICKADJ 500LL /* usecs */#define MAX_TICKADJ_SCALED \ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ) /* * phase-lock loop variables */ /* * clock synchronization status * * (TIME_ERROR prevents overwriting the CMOS clock) */static int time_state = TIME_OK; /* clock status bits: */static int time_status = STA_UNSYNC; /* time adjustment (nsecs): */static s64 time_offset; /* pll time constant: */static long time_constant = 2; /* maximum error (usecs): */static long time_maxerror = NTP_PHASE_LIMIT; /* estimated error (usecs): */static long time_esterror = NTP_PHASE_LIMIT; /* frequency offset (scaled nsecs/secs): */static s64 time_freq; /* time at last adjustment (secs): */static long time_reftime; static long time_adjust; /* constant (boot-param configurable) NTP tick adjustment (upscaled) */static s64 ntp_tick_adj; /* second value of the next pending leapsecond, or TIME64_MAX if no leap */static time64_t ntp_next_leap_sec = TIME64_MAX; #ifdef CONFIG_NTP_PPS /* * The following variables are used when a pulse-per-second (PPS) signal * is available. They establish the engineering parameters of the clock * discipline loop when controlled by the PPS signal. */#define PPS_VALID 10 /* PPS signal watchdog max (s) */#define PPS_POPCORN 4 /* popcorn spike threshold (shift) */#define PPS_INTMIN 2 /* min freq interval (s) (shift) */#define PPS_INTMAX 8 /* max freq interval (s) (shift) */#define PPS_INTCOUNT 4 /* number of consecutive good intervals to increase pps_shift or consecutive bad intervals to decrease it */#define PPS_MAXWANDER 100000 /* max PPS freq wander (ns/s) */ static int pps_valid; /* signal watchdog counter */static long pps_tf[3]; /* phase median filter */static long pps_jitter; /* current jitter (ns) */static struct timespec64 pps_fbase; /* beginning of the last freq interval */static int pps_shift; /* current interval duration (s) (shift) */static int pps_intcnt; /* interval counter */static s64 pps_freq; /* frequency offset (scaled ns/s) */static long pps_stabil; /* current stability (scaled ns/s) */ /* * PPS signal quality monitors */static long pps_calcnt; /* calibration intervals */static long pps_jitcnt; /* jitter limit exceeded */static long pps_stbcnt; /* stability limit exceeded */static long pps_errcnt; /* calibration errors */ /* PPS kernel consumer compensates the whole phase error immediately. * Otherwise, reduce the offset by a fixed factor times the time constant. */static inline s64 ntp_offset_chunk(s64 offset){ if (time_status & STA_PPSTIME && time_status & STA_PPSSIGNAL) return offset; else return shift_right(offset, SHIFT_PLL + time_constant);} static inline void pps_reset_freq_interval(void){ /* the PPS calibration interval may end surprisingly early */ pps_shift = PPS_INTMIN; pps_intcnt = 0;} /** * pps_clear - Clears the PPS state variables */static inline void pps_clear(void){ pps_reset_freq_interval(); pps_tf[0] = 0; pps_tf[1] = 0; pps_tf[2] = 0; pps_fbase.tv_sec = pps_fbase.tv_nsec = 0; pps_freq = 0;} /* Decrease pps_valid to indicate that another second has passed since * the last PPS signal. When it reaches 0, indicate that PPS signal is * missing. */static inline void pps_dec_valid(void){ if (pps_valid > 0) pps_valid--; else { time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | STA_PPSERROR); pps_clear(); }} static inline void pps_set_freq(s64 freq){ pps_freq = freq;} static inline int is_error_status(int status){ return (status & (STA_UNSYNC|STA_CLOCKERR)) /* PPS signal lost when either PPS time or * PPS frequency synchronization requested */ || ((status & (STA_PPSFREQ|STA_PPSTIME)) && !(status & STA_PPSSIGNAL)) /* PPS jitter exceeded when * PPS time synchronization requested */ || ((status & (STA_PPSTIME|STA_PPSJITTER)) == (STA_PPSTIME|STA_PPSJITTER)) /* PPS wander exceeded or calibration error when * PPS frequency synchronization requested */ || ((status & STA_PPSFREQ) && (status & (STA_PPSWANDER|STA_PPSERROR)));} static inline void pps_fill_timex(struct timex *txc){ txc->ppsfreq = shift_right((pps_freq >> PPM_SCALE_INV_SHIFT) * PPM_SCALE_INV, NTP_SCALE_SHIFT); txc->jitter = pps_jitter; if (!(time_status & STA_NANO)) txc->jitter /= NSEC_PER_USEC; txc->shift = pps_shift; txc->stabil = pps_stabil; txc->jitcnt = pps_jitcnt; txc->calcnt = pps_calcnt; txc->errcnt = pps_errcnt; txc->stbcnt = pps_stbcnt;} #else /* !CONFIG_NTP_PPS */ static inline s64 ntp_offset_chunk(s64 offset){ return shift_right(offset, SHIFT_PLL + time_constant);} static inline void pps_reset_freq_interval(void) {}static inline void pps_clear(void) {}static inline void pps_dec_valid(void) {}static inline void pps_set_freq(s64 freq) {} static inline int is_error_status(int status){ return status & (STA_UNSYNC|STA_CLOCKERR);} static inline void pps_fill_timex(struct timex *txc){ /* PPS is not implemented, so these are zero */ txc->ppsfreq = 0; txc->jitter = 0; txc->shift = 0; txc->stabil = 0; txc->jitcnt = 0; txc->calcnt = 0; txc->errcnt = 0; txc->stbcnt = 0;} #endif /* CONFIG_NTP_PPS */ /** * ntp_synced - Returns 1 if the NTP status is not UNSYNC * */static inline int ntp_synced(void){ return !(time_status & STA_UNSYNC);} /* * NTP methods: */ /* * Update (tick_length, tick_length_base, tick_nsec), based * on (tick_usec, ntp_tick_adj, time_freq): */static void ntp_update_frequency(void){ u64 second_length; u64 new_base; second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ) << NTP_SCALE_SHIFT; second_length += ntp_tick_adj; second_length += time_freq; tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT; new_base = div_u64(second_length, NTP_INTERVAL_FREQ); /* * Don't wait for the next second_overflow, apply * the change to the tick length immediately: */ tick_length += new_base - tick_length_base; tick_length_base = new_base;} static inline s64 ntp_update_offset_fll(s64 offset64, long secs){ time_status &= ~STA_MODE; if (secs < MINSEC) return 0; if (!(time_status & STA_FLL) && (secs <= MAXSEC)) return 0; time_status |= STA_MODE; return div64_long(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs);} static void ntp_update_offset(long offset){ s64 freq_adj; s64 offset64; long secs; if (!(time_status & STA_PLL)) return; if (!(time_status & STA_NANO)) offset *= NSEC_PER_USEC; /* * Scale the phase adjustment and * clamp to the operating range. */ offset = min(offset, MAXPHASE); offset = max(offset, -MAXPHASE); /* * Select how the frequency is to be controlled * and in which mode (PLL or FLL). */ secs = get_seconds() - time_reftime; if (unlikely(time_status & STA_FREQHOLD)) secs = 0; time_reftime = get_seconds(); offset64 = offset; freq_adj = ntp_update_offset_fll(offset64, secs); /* * Clamp update interval to reduce PLL gain with low * sampling rate (e.g. intermittent network connection) * to avoid instability. */ if (unlikely(secs > 1 << (SHIFT_PLL + 1 + time_constant))) secs = 1 << (SHIFT_PLL + 1 + time_constant); freq_adj += (offset64 * secs) << (NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant)); freq_adj = min(freq_adj + time_freq, MAXFREQ_SCALED); time_freq = max(freq_adj, -MAXFREQ_SCALED); time_offset = div_s64(offset64 << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);} /** * ntp_clear - Clears the NTP state variables */void ntp_clear(void){ time_adjust = 0; /* stop active adjtime() */ time_status |= STA_UNSYNC; time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; ntp_update_frequency(); tick_length = tick_length_base; time_offset = 0; ntp_next_leap_sec = TIME64_MAX; /* Clear PPS state variables */ pps_clear();} u64 ntp_tick_length(void){ return tick_length;} /** * ntp_get_next_leap - Returns the next leapsecond in CLOCK_REALTIME ktime_t * * Provides the time of the next leapsecond against CLOCK_REALTIME in * a ktime_t format. Returns KTIME_MAX if no leapsecond is pending. */ktime_t ntp_get_next_leap(void){ ktime_t ret; if ((time_state == TIME_INS) && (time_status & STA_INS)) return ktime_set(ntp_next_leap_sec, 0); ret.tv64 = KTIME_MAX; return ret;} /* * this routine handles the overflow of the microsecond field * * The tricky bits of code to handle the accurate clock support * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. * They were originally developed for SUN and DEC kernels. * All the kudos should go to Dave for this stuff. * * Also handles leap second processing, and returns leap offset */int second_overflow(unsigned long secs){ s64 delta; int leap = 0; /* * Leap second processing. If in leap-insert state at the end of the * day, the system clock is set back one second; if in leap-delete * state, the system clock is set ahead one second. */ switch (time_state) { case TIME_OK: if (time_status & STA_INS) { time_state = TIME_INS; ntp_next_leap_sec = secs + SECS_PER_DAY - (secs % SECS_PER_DAY); } else if (time_status & STA_DEL) { time_state = TIME_DEL; ntp_next_leap_sec = secs + SECS_PER_DAY - ((secs+1) % SECS_PER_DAY); } break; case TIME_INS: if (!(time_status & STA_INS)) { ntp_next_leap_sec = TIME64_MAX; time_state = TIME_OK; } else if (secs % SECS_PER_DAY == 0) { leap = -1; time_state = TIME_OOP; printk(KERN_NOTICE "Clock: inserting leap second 23:59:60 UTC\n"); } break; case TIME_DEL: if (!(time_status & STA_DEL)) { ntp_next_leap_sec = TIME64_MAX; time_state = TIME_OK; } else if ((secs + 1) % SECS_PER_DAY == 0) { leap = 1; ntp_next_leap_sec = TIME64_MAX; time_state = TIME_WAIT; printk(KERN_NOTICE "Clock: deleting leap second 23:59:59 UTC\n"); } break; case TIME_OOP: ntp_next_leap_sec = TIME64_MAX; time_state = TIME_WAIT; break; case TIME_WAIT: if (!(time_status & (STA_INS | STA_DEL))) time_state = TIME_OK; break; } /* Bump the maxerror field */ time_maxerror += MAXFREQ / NSEC_PER_USEC; if (time_maxerror > NTP_PHASE_LIMIT) { time_maxerror = NTP_PHASE_LIMIT; time_status |= STA_UNSYNC; } /* Compute the phase adjustment for the next second */ tick_length = tick_length_base; delta = ntp_offset_chunk(time_offset); time_offset -= delta; tick_length += delta; /* Check PPS signal */ pps_dec_valid(); if (!time_adjust) goto out; if (time_adjust > MAX_TICKADJ) { time_adjust -= MAX_TICKADJ; tick_length += MAX_TICKADJ_SCALED; goto out; } if (time_adjust < -MAX_TICKADJ) { time_adjust += MAX_TICKADJ; tick_length -= MAX_TICKADJ_SCALED; goto out; } tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT; time_adjust = 0; out: return leap;} #ifdef CONFIG_GENERIC_CMOS_UPDATEint __weak update_persistent_clock(struct timespec now){ return -ENODEV;} int __weak update_persistent_clock64(struct timespec64 now64){ struct timespec now; now = timespec64_to_timespec(now64); return update_persistent_clock(now);Lines 1–500 of 1017. Load more
/* * NTP state machine interfaces and logic. * * This code was mainly moved from kernel/timer.c and kernel/time.c * Please see those files for relevant copyright info and historical * changelogs. */ #include <linux/capability.h> #include <linux/clocksource.h> #include <linux/workqueue.h> #include <linux/hrtimer.h> #include <linux/jiffies.h> #include <linux/math64.h> #include <linux/timex.h> #include <linux/time.h> #include <linux/mm.h> #include <linux/module.h> #include <linux/rtc.h> #include "ntp_internal.h" /* * NTP timekeeping variables: * * Note: All of the NTP state is protected by the timekeeping locks. */ /* USER_HZ period (usecs): */ unsigned long tick_usec = TICK_USEC; /* SHIFTED_HZ period (nsecs): */ unsigned long tick_nsec; static u64 tick_length; static u64 tick_length_base; #define SECS_PER_DAY 86400 #define MAX_TICKADJ 500LL /* usecs */ #define MAX_TICKADJ_SCALED \ (((MAX_TICKADJ * NSEC_PER_USEC) << NTP_SCALE_SHIFT) / NTP_INTERVAL_FREQ) /* * phase-lock loop variables */ /* * clock synchronization status * * (TIME_ERROR prevents overwriting the CMOS clock) */ static int time_state = TIME_OK; /* clock status bits: */ static int time_status = STA_UNSYNC; /* time adjustment (nsecs): */ static s64 time_offset; /* pll time constant: */ static long time_constant = 2; /* maximum error (usecs): */ static long time_maxerror = NTP_PHASE_LIMIT; /* estimated error (usecs): */ static long time_esterror = NTP_PHASE_LIMIT; /* frequency offset (scaled nsecs/secs): */ static s64 time_freq; /* time at last adjustment (secs): */ static long time_reftime; static long time_adjust; /* constant (boot-param configurable) NTP tick adjustment (upscaled) */ static s64 ntp_tick_adj; /* second value of the next pending leapsecond, or TIME64_MAX if no leap */ static time64_t ntp_next_leap_sec = TIME64_MAX; #ifdef CONFIG_NTP_PPS /* * The following variables are used when a pulse-per-second (PPS) signal * is available. They establish the engineering parameters of the clock * discipline loop when controlled by the PPS signal. */ #define PPS_VALID 10 /* PPS signal watchdog max (s) */ #define PPS_POPCORN 4 /* popcorn spike threshold (shift) */ #define PPS_INTMIN 2 /* min freq interval (s) (shift) */ #define PPS_INTMAX 8 /* max freq interval (s) (shift) */ #define PPS_INTCOUNT 4 /* number of consecutive good intervals to increase pps_shift or consecutive bad intervals to decrease it */ #define PPS_MAXWANDER 100000 /* max PPS freq wander (ns/s) */ static int pps_valid; /* signal watchdog counter */ static long pps_tf[3]; /* phase median filter */ static long pps_jitter; /* current jitter (ns) */ static struct timespec64 pps_fbase; /* beginning of the last freq interval */ static int pps_shift; /* current interval duration (s) (shift) */ static int pps_intcnt; /* interval counter */ static s64 pps_freq; /* frequency offset (scaled ns/s) */ static long pps_stabil; /* current stability (scaled ns/s) */ /* * PPS signal quality monitors */ static long pps_calcnt; /* calibration intervals */ static long pps_jitcnt; /* jitter limit exceeded */ static long pps_stbcnt; /* stability limit exceeded */ static long pps_errcnt; /* calibration errors */ /* PPS kernel consumer compensates the whole phase error immediately. * Otherwise, reduce the offset by a fixed factor times the time constant. */ static inline s64 ntp_offset_chunk(s64 offset) { if (time_status & STA_PPSTIME && time_status & STA_PPSSIGNAL) return offset; else return shift_right(offset, SHIFT_PLL + time_constant); } static inline void pps_reset_freq_interval(void) { /* the PPS calibration interval may end surprisingly early */ pps_shift = PPS_INTMIN; pps_intcnt = 0; } /** * pps_clear - Clears the PPS state variables */ static inline void pps_clear(void) { pps_reset_freq_interval(); pps_tf[0] = 0; pps_tf[1] = 0; pps_tf[2] = 0; pps_fbase.tv_sec = pps_fbase.tv_nsec = 0; pps_freq = 0; } /* Decrease pps_valid to indicate that another second has passed since * the last PPS signal. When it reaches 0, indicate that PPS signal is * missing. */ static inline void pps_dec_valid(void) { if (pps_valid > 0) pps_valid--; else { time_status &= ~(STA_PPSSIGNAL | STA_PPSJITTER | STA_PPSWANDER | STA_PPSERROR); pps_clear(); } } static inline void pps_set_freq(s64 freq) { pps_freq = freq; } static inline int is_error_status(int status) { return (status & (STA_UNSYNC|STA_CLOCKERR)) /* PPS signal lost when either PPS time or * PPS frequency synchronization requested */ || ((status & (STA_PPSFREQ|STA_PPSTIME)) && !(status & STA_PPSSIGNAL)) /* PPS jitter exceeded when * PPS time synchronization requested */ || ((status & (STA_PPSTIME|STA_PPSJITTER)) == (STA_PPSTIME|STA_PPSJITTER)) /* PPS wander exceeded or calibration error when * PPS frequency synchronization requested */ || ((status & STA_PPSFREQ) && (status & (STA_PPSWANDER|STA_PPSERROR))); } static inline void pps_fill_timex(struct timex *txc) { txc->ppsfreq = shift_right((pps_freq >> PPM_SCALE_INV_SHIFT) * PPM_SCALE_INV, NTP_SCALE_SHIFT); txc->jitter = pps_jitter; if (!(time_status & STA_NANO)) txc->jitter /= NSEC_PER_USEC; txc->shift = pps_shift; txc->stabil = pps_stabil; txc->jitcnt = pps_jitcnt; txc->calcnt = pps_calcnt; txc->errcnt = pps_errcnt; txc->stbcnt = pps_stbcnt; } #else /* !CONFIG_NTP_PPS */ static inline s64 ntp_offset_chunk(s64 offset) { return shift_right(offset, SHIFT_PLL + time_constant); } static inline void pps_reset_freq_interval(void) {} static inline void pps_clear(void) {} static inline void pps_dec_valid(void) {} static inline void pps_set_freq(s64 freq) {} static inline int is_error_status(int status) { return status & (STA_UNSYNC|STA_CLOCKERR); } static inline void pps_fill_timex(struct timex *txc) { /* PPS is not implemented, so these are zero */ txc->ppsfreq = 0; txc->jitter = 0; txc->shift = 0; txc->stabil = 0; txc->jitcnt = 0; txc->calcnt = 0; txc->errcnt = 0; txc->stbcnt = 0; } #endif /* CONFIG_NTP_PPS */ /** * ntp_synced - Returns 1 if the NTP status is not UNSYNC * */ static inline int ntp_synced(void) { return !(time_status & STA_UNSYNC); } /* * NTP methods: */ /* * Update (tick_length, tick_length_base, tick_nsec), based * on (tick_usec, ntp_tick_adj, time_freq): */ static void ntp_update_frequency(void) { u64 second_length; u64 new_base; second_length = (u64)(tick_usec * NSEC_PER_USEC * USER_HZ) << NTP_SCALE_SHIFT; second_length += ntp_tick_adj; second_length += time_freq; tick_nsec = div_u64(second_length, HZ) >> NTP_SCALE_SHIFT; new_base = div_u64(second_length, NTP_INTERVAL_FREQ); /* * Don't wait for the next second_overflow, apply * the change to the tick length immediately: */ tick_length += new_base - tick_length_base; tick_length_base = new_base; } static inline s64 ntp_update_offset_fll(s64 offset64, long secs) { time_status &= ~STA_MODE; if (secs < MINSEC) return 0; if (!(time_status & STA_FLL) && (secs <= MAXSEC)) return 0; time_status |= STA_MODE; return div64_long(offset64 << (NTP_SCALE_SHIFT - SHIFT_FLL), secs); } static void ntp_update_offset(long offset) { s64 freq_adj; s64 offset64; long secs; if (!(time_status & STA_PLL)) return; if (!(time_status & STA_NANO)) offset *= NSEC_PER_USEC; /* * Scale the phase adjustment and * clamp to the operating range. */ offset = min(offset, MAXPHASE); offset = max(offset, -MAXPHASE); /* * Select how the frequency is to be controlled * and in which mode (PLL or FLL). */ secs = get_seconds() - time_reftime; if (unlikely(time_status & STA_FREQHOLD)) secs = 0; time_reftime = get_seconds(); offset64 = offset; freq_adj = ntp_update_offset_fll(offset64, secs); /* * Clamp update interval to reduce PLL gain with low * sampling rate (e.g. intermittent network connection) * to avoid instability. */ if (unlikely(secs > 1 << (SHIFT_PLL + 1 + time_constant))) secs = 1 << (SHIFT_PLL + 1 + time_constant); freq_adj += (offset64 * secs) << (NTP_SCALE_SHIFT - 2 * (SHIFT_PLL + 2 + time_constant)); freq_adj = min(freq_adj + time_freq, MAXFREQ_SCALED); time_freq = max(freq_adj, -MAXFREQ_SCALED); time_offset = div_s64(offset64 << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ); } /** * ntp_clear - Clears the NTP state variables */ void ntp_clear(void) { time_adjust = 0; /* stop active adjtime() */ time_status |= STA_UNSYNC; time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; ntp_update_frequency(); tick_length = tick_length_base; time_offset = 0; ntp_next_leap_sec = TIME64_MAX; /* Clear PPS state variables */ pps_clear(); } u64 ntp_tick_length(void) { return tick_length; } /** * ntp_get_next_leap - Returns the next leapsecond in CLOCK_REALTIME ktime_t * * Provides the time of the next leapsecond against CLOCK_REALTIME in * a ktime_t format. Returns KTIME_MAX if no leapsecond is pending. */ ktime_t ntp_get_next_leap(void) { ktime_t ret; if ((time_state == TIME_INS) && (time_status & STA_INS)) return ktime_set(ntp_next_leap_sec, 0); ret.tv64 = KTIME_MAX; return ret; } /* * this routine handles the overflow of the microsecond field * * The tricky bits of code to handle the accurate clock support * were provided by Dave Mills (Mills@UDEL.EDU) of NTP fame. * They were originally developed for SUN and DEC kernels. * All the kudos should go to Dave for this stuff. * * Also handles leap second processing, and returns leap offset */ int second_overflow(unsigned long secs) { s64 delta; int leap = 0; /* * Leap second processing. If in leap-insert state at the end of the * day, the system clock is set back one second; if in leap-delete * state, the system clock is set ahead one second. */ switch (time_state) { case TIME_OK: if (time_status & STA_INS) { time_state = TIME_INS; ntp_next_leap_sec = secs + SECS_PER_DAY - (secs % SECS_PER_DAY); } else if (time_status & STA_DEL) { time_state = TIME_DEL; ntp_next_leap_sec = secs + SECS_PER_DAY - ((secs+1) % SECS_PER_DAY); } break; case TIME_INS: if (!(time_status & STA_INS)) { ntp_next_leap_sec = TIME64_MAX; time_state = TIME_OK; } else if (secs % SECS_PER_DAY == 0) { leap = -1; time_state = TIME_OOP; printk(KERN_NOTICE "Clock: inserting leap second 23:59:60 UTC\n"); } break; case TIME_DEL: if (!(time_status & STA_DEL)) { ntp_next_leap_sec = TIME64_MAX; time_state = TIME_OK; } else if ((secs + 1) % SECS_PER_DAY == 0) { leap = 1; ntp_next_leap_sec = TIME64_MAX; time_state = TIME_WAIT; printk(KERN_NOTICE "Clock: deleting leap second 23:59:59 UTC\n"); } break; case TIME_OOP: ntp_next_leap_sec = TIME64_MAX; time_state = TIME_WAIT; break; case TIME_WAIT: if (!(time_status & (STA_INS | STA_DEL))) time_state = TIME_OK; break; } /* Bump the maxerror field */ time_maxerror += MAXFREQ / NSEC_PER_USEC; if (time_maxerror > NTP_PHASE_LIMIT) { time_maxerror = NTP_PHASE_LIMIT; time_status |= STA_UNSYNC; } /* Compute the phase adjustment for the next second */ tick_length = tick_length_base; delta = ntp_offset_chunk(time_offset); time_offset -= delta; tick_length += delta; /* Check PPS signal */ pps_dec_valid(); if (!time_adjust) goto out; if (time_adjust > MAX_TICKADJ) { time_adjust -= MAX_TICKADJ; tick_length += MAX_TICKADJ_SCALED; goto out; } if (time_adjust < -MAX_TICKADJ) { time_adjust += MAX_TICKADJ; tick_length -= MAX_TICKADJ_SCALED; goto out; } tick_length += (s64)(time_adjust * NSEC_PER_USEC / NTP_INTERVAL_FREQ) << NTP_SCALE_SHIFT; time_adjust = 0; out: return leap; } #ifdef CONFIG_GENERIC_CMOS_UPDATE int __weak update_persistent_clock(struct timespec now) { return -ENODEV; } int __weak update_persistent_clock64(struct timespec64 now64) { struct timespec now; now = timespec64_to_timespec(now64); return update_persistent_clock(now);