# SPDX-License-Identifier: GPL-2.0-onlyconfig ARCH_HAS_RESET_CONTROLLER	bool menuconfig RESET_CONTROLLER	bool "Reset Controller Support"	default y if ARCH_HAS_RESET_CONTROLLER	help	  Generic Reset Controller support. 	  This framework is designed to abstract reset handling of devices	  via GPIOs or SoC-internal reset controller modules. 	  If unsure, say no. if RESET_CONTROLLER config RESET_A10SR	tristate "Altera Arria10 System Resource Reset"	depends on MFD_ALTERA_A10SR	help	  This option enables support for the external reset functions for	  peripheral PHYs on the Altera Arria10 System Resource Chip. config RESET_ATH79	bool "AR71xx Reset Driver" if COMPILE_TEST	default ATH79	help	  This enables the ATH79 reset controller driver that supports the	  AR71xx SoC reset controller. config RESET_AXS10X	bool "AXS10x Reset Driver" if COMPILE_TEST	default ARC_PLAT_AXS10X	help	  This enables the reset controller driver for AXS10x. config RESET_BCM6345	bool "BCM6345 Reset Controller"	depends on BMIPS_GENERIC || COMPILE_TEST	default BMIPS_GENERIC	help	  This enables the reset controller driver for BCM6345 SoCs. config RESET_BERLIN	bool "Berlin Reset Driver" if COMPILE_TEST	default ARCH_BERLIN	help	  This enables the reset controller driver for Marvell Berlin SoCs. config RESET_BRCMSTB	tristate "Broadcom STB reset controller"	depends on ARCH_BRCMSTB || COMPILE_TEST	default ARCH_BRCMSTB	help	  This enables the reset controller driver for Broadcom STB SoCs using	  a SUN_TOP_CTRL_SW_INIT style controller. config RESET_BRCMSTB_RESCAL	bool "Broadcom STB RESCAL reset controller"	depends on HAS_IOMEM	default ARCH_BRCMSTB || COMPILE_TEST	help	  This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on	  BCM7216. config RESET_HSDK	bool "Synopsys HSDK Reset Driver"	depends on HAS_IOMEM	depends on ARC_SOC_HSDK || COMPILE_TEST	help	  This enables the reset controller driver for HSDK board. config RESET_IMX7	tristate "i.MX7/8 Reset Driver"	depends on HAS_IOMEM	depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST	default y if SOC_IMX7D	select MFD_SYSCON	help	  This enables the reset controller driver for i.MX7 SoCs. config RESET_INTEL_GW	bool "Intel Reset Controller Driver"	depends on OF && HAS_IOMEM	select REGMAP_MMIO	help	  This enables the reset controller driver for Intel Gateway SoCs.	  Say Y to control the reset signals provided by reset controller.	  Otherwise, say N. config RESET_K210	bool "Reset controller driver for Canaan Kendryte K210 SoC"	depends on (SOC_CANAAN || COMPILE_TEST) && OF	select MFD_SYSCON	default SOC_CANAAN	help	  Support for the Canaan Kendryte K210 RISC-V SoC reset controller.	  Say Y if you want to control reset signals provided by this	  controller. config RESET_LANTIQ	bool "Lantiq XWAY Reset Driver" if COMPILE_TEST	default SOC_TYPE_XWAY	help	  This enables the reset controller driver for Lantiq / Intel XWAY SoCs. config RESET_LPC18XX	bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST	default ARCH_LPC18XX	help	  This enables the reset controller driver for NXP LPC18xx/43xx SoCs. config RESET_MESON	tristate "Meson Reset Driver"	depends on ARCH_MESON || COMPILE_TEST	default ARCH_MESON	help	  This enables the reset driver for Amlogic Meson SoCs. config RESET_MESON_AUDIO_ARB	tristate "Meson Audio Memory Arbiter Reset Driver"	depends on ARCH_MESON || COMPILE_TEST	help	  This enables the reset driver for Audio Memory Arbiter of	  Amlogic's A113 based SoCs config RESET_NPCM	bool "NPCM BMC Reset Driver" if COMPILE_TEST	default ARCH_NPCM	help	  This enables the reset controller driver for Nuvoton NPCM	  BMC SoCs. config RESET_OXNAS	bool config RESET_PISTACHIO	bool "Pistachio Reset Driver" if COMPILE_TEST	default MACH_PISTACHIO	help	  This enables the reset driver for ImgTec Pistachio SoCs. config RESET_QCOM_AOSS	tristate "Qcom AOSS Reset Driver"	depends on ARCH_QCOM || COMPILE_TEST	help	  This enables the AOSS (always on subsystem) reset driver	  for Qualcomm SDM845 SoCs. Say Y if you want to control	  reset signals provided by AOSS for Modem, Venus, ADSP,	  GPU, Camera, Wireless, Display subsystem. Otherwise, say N. config RESET_QCOM_PDC	tristate "Qualcomm PDC Reset Driver"	depends on ARCH_QCOM || COMPILE_TEST	help	  This enables the PDC (Power Domain Controller) reset driver	  for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want	  to control reset signals provided by PDC for Modem, Compute,	  Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. config RESET_RASPBERRYPI	tristate "Raspberry Pi 4 Firmware Reset Driver"	depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST)	default USB_XHCI_PCI	help	  Raspberry Pi 4's co-processor controls some of the board's HW	  initialization process, but it's up to Linux to trigger it when	  relevant. This driver provides a reset controller capable of	  interfacing with RPi4's co-processor and model these firmware	  initialization routines as reset lines. config RESET_SCMI	tristate "Reset driver controlled via ARM SCMI interface"	depends on ARM_SCMI_PROTOCOL || COMPILE_TEST	default ARM_SCMI_PROTOCOL	help	  This driver provides support for reset signal/domains that are	  controlled by firmware that implements the SCMI interface. 	  This driver uses SCMI Message Protocol to interact with the	  firmware controlling all the reset signals. config RESET_SIMPLE	bool "Simple Reset Controller Driver" if COMPILE_TEST	default ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || (ARCH_INTEL_SOCFPGA && ARM64) || ARCH_SUNXI || ARC	help	  This enables a simple reset controller driver for reset lines that	  that can be asserted and deasserted by toggling bits in a contiguous,	  exclusive register space. 	  Currently this driver supports:	   - Altera SoCFPGAs	   - ASPEED BMC SoCs	   - Bitmain BM1880 SoC	   - Realtek SoCs	   - RCC reset controller in STM32 MCUs	   - Allwinner SoCs	   - ZTE's zx2967 family	   - SiFive FU740 SoCs config RESET_STM32MP157	bool "STM32MP157 Reset Driver" if COMPILE_TEST	default MACH_STM32MP157	help	  This enables the RCC reset controller driver for STM32 MPUs. config RESET_SOCFPGA	bool "SoCFPGA Reset Driver" if COMPILE_TEST && (!ARM || !ARCH_INTEL_SOCFPGA)	default ARM && ARCH_INTEL_SOCFPGA	select RESET_SIMPLE	help	  This enables the reset driver for the SoCFPGA ARMv7 platforms. This	  driver gets initialized early during platform init calls. config RESET_SUNXI	bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI	default ARCH_SUNXI	select RESET_SIMPLE	help	  This enables the reset driver for Allwinner SoCs. config RESET_TI_SCI	tristate "TI System Control Interface (TI-SCI) reset driver"	depends on TI_SCI_PROTOCOL	help	  This enables the reset driver support over TI System Control Interface	  available on some new TI's SoCs. If you wish to use reset resources	  managed by the TI System Controller, say Y here. Otherwise, say N. config RESET_TI_SYSCON	tristate "TI SYSCON Reset Driver"	depends on HAS_IOMEM	select MFD_SYSCON	help	  This enables the reset driver support for TI devices with	  memory-mapped reset registers as part of a syscon device node. If	  you wish to use the reset framework for such memory-mapped devices,	  say Y here. Otherwise, say N. config RESET_UNIPHIER	tristate "Reset controller driver for UniPhier SoCs"	depends on ARCH_UNIPHIER || COMPILE_TEST	depends on OF && MFD_SYSCON	default ARCH_UNIPHIER	help	  Support for reset controllers on UniPhier SoCs.	  Say Y if you want to control reset signals provided by System Control	  block, Media I/O block, Peripheral Block. config RESET_UNIPHIER_GLUE	tristate "Reset driver in glue layer for UniPhier SoCs"	depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF	default ARCH_UNIPHIER	select RESET_SIMPLE	help	  Support for peripheral core reset included in its own glue layer	  on UniPhier SoCs. Say Y if you want to control reset signals	  provided by the glue layer. config RESET_ZYNQ	bool "ZYNQ Reset Driver" if COMPILE_TEST	default ARCH_ZYNQ	help	  This enables the reset controller driver for Xilinx Zynq SoCs. source "drivers/reset/sti/Kconfig"source "drivers/reset/hisilicon/Kconfig"source "drivers/reset/tegra/Kconfig" endif