# SPDX-License-Identifier: GPL-2.0-only## fbdev configuration# config FB_CMDLINE bool config FB_NOTIFY bool menuconfig FB tristate "Support for frame buffer devices" select FB_CMDLINE select FB_NOTIFY help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. config FIRMWARE_EDID bool "Enable firmware EDID" depends on FB help This enables access to the EDID transferred from the firmware. On the i386, this is from the Video BIOS. Enable this if DDC/I2C transfers do not work for your driver and if you are using nvidiafb, i810fb or savagefb. In general, choosing Y for this option is safe. If you experience extremely long delays while booting before you get something on your display, try setting this to N. Matrox cards in combination with certain motherboards and monitors are known to suffer from this problem. config FB_DDC tristate depends on FB select I2C_ALGOBIT select I2C config FB_BOOT_VESA_SUPPORT bool depends on FB help If true, at least one selected framebuffer driver can take advantage of VESA video modes set at an early boot stage via the vga= parameter. config FB_CFB_FILLRECT tristate depends on FB help Include the cfb_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_COPYAREA tristate depends on FB help Include the cfb_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_IMAGEBLIT tristate depends on FB help Include the cfb_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_REV_PIXELS_IN_BYTE bool depends on FB help Allow generic frame-buffer functions to work on displays with 1, 2 and 4 bits per pixel depths which has opposite order of pixels in byte order to bytes in long order. config FB_SYS_FILLRECT tristate depends on FB help Include the sys_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_SYS_COPYAREA tristate depends on FB help Include the sys_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_SYS_IMAGEBLIT tristate depends on FB help Include the sys_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_PROVIDE_GET_FB_UNMAPPED_AREA bool depends on FB help Allow generic frame-buffer to provide get_fb_unmapped_area function. menuconfig FB_FOREIGN_ENDIAN bool "Framebuffer foreign endianness support" depends on FB help This menu will let you enable support for the framebuffers with non-native endianness (e.g. Little-Endian framebuffer on a Big-Endian machine). Most probably you don't have such hardware, so it's safe to say "n" here. choice prompt "Choice endianness support" depends on FB_FOREIGN_ENDIAN config FB_BOTH_ENDIAN bool "Support for Big- and Little-Endian framebuffers" config FB_BIG_ENDIAN bool "Support for Big-Endian framebuffers only" config FB_LITTLE_ENDIAN bool "Support for Little-Endian framebuffers only" endchoice config FB_SYS_FOPS tristate depends on FB config FB_DEFERRED_IO bool depends on FB config FB_HECUBA tristate depends on FB depends on FB_DEFERRED_IO config FB_SVGALIB tristate depends on FB help Common utility functions useful to fbdev drivers of VGA-based cards. config FB_MACMODES tristate depends on FB config FB_BACKLIGHT tristate depends on FB select BACKLIGHT_CLASS_DEVICE config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB help This enables functions for handling video modes using the Generalized Timing Formula and the EDID parser. A few drivers rely on this feature such as the radeonfb, rivafb, and the i810fb. If your driver does not take advantage of this feature, choosing Y will just increase the kernel size by about 5K. config FB_TILEBLITTING bool "Enable Tile Blitting Support" depends on FB help This enables tile blitting. Tile blitting is a drawing technique where the screen is divided into rectangular sections (tiles), whereas the standard blitting divides the screen into pixels. Because the default drawing element is a tile, drawing functions will be passed parameters in terms of number of tiles instead of number of pixels. For example, to draw a single character, instead of using bitmaps, an index to an array of bitmaps will be used. To clear or move a rectangular section of a screen, the rectangle will be described in terms of number of tiles in the x- and y-axis. This is particularly important to one driver, matroxfb. If unsure, say N. comment "Frame buffer hardware drivers" depends on FB config FB_GRVGA tristate "Aeroflex Gaisler framebuffer support" depends on FB && SPARC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. If you have a PCI-based system, this enables support for these chips: GD-543x, GD-544x, GD-5480. Please read the file <file:Documentation/fb/cirrusfb.rst>. Say N unless you have such a graphics board or plan to get one before you next recompile the kernel. config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. The driver was tested on the following cards: Diamond FireGL 1000 PRO AGP ELSA Gloria Synergy PCI Appian Jeronimo PRO (both heads) PCI 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC ASK Graphic Blaster Exxtreme AGP To compile this driver as a module, choose M here: the module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help Support the Permedia2 FIFO disconnect feature. config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on ARM || ARM64 || COMPILE_TEST depends on FB && ARM_AMBA && HAS_IOMEM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MODE_HELPERS if OF select VIDEOMODE_HELPERS if OF select BACKLIGHT_CLASS_DEVICE if OF help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building blocks for System on a Chip devices. If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M here and read <file:Documentation/kbuild/modules.rst>. The module will be called amba-clcd. config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If unsure, say N. config FB_CLPS711X tristate "CLPS711X LCD support" depends on FB && (ARCH_CLPS711X || COMPILE_TEST) select FB_MODE_HELPERS select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select LCD_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y to enable the Framebuffer driver for the Cirrus Logic CLPS711X CPUs. config FB_SA1100 bool "SA-1100 LCD support" depends on (FB = y) && ARM && ARCH_SA1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer devices. If you plan to use the LCD display with your SA-1100 system, say Y here. config FB_IMX tristate "Freescale i.MX1/21/25/27 LCD support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST select LCD_CLASS_DEVICE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MODE_HELPERS select VIDEOMODE_HELPERS config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. Say Y if you have a NetWinder or a graphics card containing this device, otherwise say N. config FB_CYBER2000_DDC bool "DDC for CyberPro support" depends on FB_CYBER2000 select FB_DDC default y help Say Y here if you want DDC support for your CyberPro graphics card. This is only I2C bus support, driver does not use EDID. config FB_CYBER2000_I2C bool "CyberPro 2000/2010/5000 I2C support" depends on FB_CYBER2000 && I2C && ARCH_NETWINDER depends on I2C=y || FB_CYBER2000=m select I2C_ALGOBIT help Enable support for the I2C video decoder interface on the Integraphics CyberPro 20x0 and 5000 VGA chips. This is used on the Netwinder machines for the SAA7111 video capture. config FB_APOLLO bool depends on (FB = y) && APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT config FB_Q40 bool depends on (FB = y) && Q40 default y select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. To compile this driver as a module, choose M here: the module will be called amifb. config FB_AMIGA_OCS bool "Amiga OCS chipset support" depends on FB_AMIGA help This enables support for the original Agnus and Denise video chips, found in the Amiga 1000 and most A500's and A2000's. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_ECS bool "Amiga ECS chipset support" depends on FB_AMIGA help This enables support for the Enhanced Chip Set, found in later A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_AGA bool "Amiga AGA chipset support" depends on FB_AMIGA help This enables support for the Advanced Graphics Architecture (also known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && (X86 || COMPILE_TEST) select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" depends on (FB = y) && PPC && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics board. config FB_CONTROL bool "Apple \"control\" display support" depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. config FB_PLATINUM bool "Apple \"platinum\" display support" depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLITLines 1–500 of 2241. Load more
# SPDX-License-Identifier: GPL-2.0-only # # fbdev configuration # config FB_CMDLINE bool config FB_NOTIFY bool menuconfig FB tristate "Support for frame buffer devices" select FB_CMDLINE select FB_NOTIFY help The frame buffer device provides an abstraction for the graphics hardware. It represents the frame buffer of some video hardware and allows application software to access the graphics hardware through a well-defined interface, so the software doesn't need to know anything about the low-level (hardware register) stuff. Frame buffer devices work identically across the different architectures supported by Linux and make the implementation of application programs easier and more portable; at this point, an X server exists which uses the frame buffer device exclusively. On several non-X86 architectures, the frame buffer device is the only way to use the graphics hardware. The device is accessed through special device nodes, usually located in the /dev directory, i.e. /dev/fb*. You need an utility program called fbset to make full use of frame buffer devices. Please read <file:Documentation/fb/framebuffer.rst> and the Framebuffer-HOWTO at <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more information. Say Y here and to the driver for your graphics board below if you are compiling a kernel for a non-x86 architecture. If you are compiling for the x86 architecture, you can say Y if you want to play with it, but it is not essential. Please note that running graphical applications that directly touch the hardware (e.g. an accelerated X server) and that are not frame buffer device-aware may cause unexpected results. If unsure, say N. config FIRMWARE_EDID bool "Enable firmware EDID" depends on FB help This enables access to the EDID transferred from the firmware. On the i386, this is from the Video BIOS. Enable this if DDC/I2C transfers do not work for your driver and if you are using nvidiafb, i810fb or savagefb. In general, choosing Y for this option is safe. If you experience extremely long delays while booting before you get something on your display, try setting this to N. Matrox cards in combination with certain motherboards and monitors are known to suffer from this problem. config FB_DDC tristate depends on FB select I2C_ALGOBIT select I2C config FB_BOOT_VESA_SUPPORT bool depends on FB help If true, at least one selected framebuffer driver can take advantage of VESA video modes set at an early boot stage via the vga= parameter. config FB_CFB_FILLRECT tristate depends on FB help Include the cfb_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_COPYAREA tristate depends on FB help Include the cfb_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_IMAGEBLIT tristate depends on FB help Include the cfb_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version. config FB_CFB_REV_PIXELS_IN_BYTE bool depends on FB help Allow generic frame-buffer functions to work on displays with 1, 2 and 4 bits per pixel depths which has opposite order of pixels in byte order to bytes in long order. config FB_SYS_FILLRECT tristate depends on FB help Include the sys_fillrect function for generic software rectangle filling. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_SYS_COPYAREA tristate depends on FB help Include the sys_copyarea function for generic software area copying. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_SYS_IMAGEBLIT tristate depends on FB help Include the sys_imageblit function for generic software image blitting. This is used by drivers that don't provide their own (accelerated) version and the framebuffer is in system RAM. config FB_PROVIDE_GET_FB_UNMAPPED_AREA bool depends on FB help Allow generic frame-buffer to provide get_fb_unmapped_area function. menuconfig FB_FOREIGN_ENDIAN bool "Framebuffer foreign endianness support" depends on FB help This menu will let you enable support for the framebuffers with non-native endianness (e.g. Little-Endian framebuffer on a Big-Endian machine). Most probably you don't have such hardware, so it's safe to say "n" here. choice prompt "Choice endianness support" depends on FB_FOREIGN_ENDIAN config FB_BOTH_ENDIAN bool "Support for Big- and Little-Endian framebuffers" config FB_BIG_ENDIAN bool "Support for Big-Endian framebuffers only" config FB_LITTLE_ENDIAN bool "Support for Little-Endian framebuffers only" endchoice config FB_SYS_FOPS tristate depends on FB config FB_DEFERRED_IO bool depends on FB config FB_HECUBA tristate depends on FB depends on FB_DEFERRED_IO config FB_SVGALIB tristate depends on FB help Common utility functions useful to fbdev drivers of VGA-based cards. config FB_MACMODES tristate depends on FB config FB_BACKLIGHT tristate depends on FB select BACKLIGHT_CLASS_DEVICE config FB_MODE_HELPERS bool "Enable Video Mode Handling Helpers" depends on FB help This enables functions for handling video modes using the Generalized Timing Formula and the EDID parser. A few drivers rely on this feature such as the radeonfb, rivafb, and the i810fb. If your driver does not take advantage of this feature, choosing Y will just increase the kernel size by about 5K. config FB_TILEBLITTING bool "Enable Tile Blitting Support" depends on FB help This enables tile blitting. Tile blitting is a drawing technique where the screen is divided into rectangular sections (tiles), whereas the standard blitting divides the screen into pixels. Because the default drawing element is a tile, drawing functions will be passed parameters in terms of number of tiles instead of number of pixels. For example, to draw a single character, instead of using bitmaps, an index to an array of bitmaps will be used. To clear or move a rectangular section of a screen, the rectangle will be described in terms of number of tiles in the x- and y-axis. This is particularly important to one driver, matroxfb. If unsure, say N. comment "Frame buffer hardware drivers" depends on FB config FB_GRVGA tristate "Aeroflex Gaisler framebuffer support" depends on FB && SPARC select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler. config FB_CIRRUS tristate "Cirrus Logic support" depends on FB && (ZORRO || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for Cirrus Logic GD542x/543x based boards on Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum. If you have a PCI-based system, this enables support for these chips: GD-543x, GD-544x, GD-5480. Please read the file <file:Documentation/fb/cirrusfb.rst>. Say N unless you have such a graphics board or plan to get one before you next recompile the kernel. config FB_PM2 tristate "Permedia2 support" depends on FB && ((AMIGA && BROKEN) || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for cards based on the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. The driver was tested on the following cards: Diamond FireGL 1000 PRO AGP ELSA Gloria Synergy PCI Appian Jeronimo PRO (both heads) PCI 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC ASK Graphic Blaster Exxtreme AGP To compile this driver as a module, choose M here: the module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help Support the Permedia2 FIFO disconnect feature. config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" depends on ARM || ARM64 || COMPILE_TEST depends on FB && ARM_AMBA && HAS_IOMEM select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MODE_HELPERS if OF select VIDEOMODE_HELPERS if OF select BACKLIGHT_CLASS_DEVICE if OF help This framebuffer device driver is for the ARM PrimeCell PL110 Colour LCD controller. ARM PrimeCells provide the building blocks for System on a Chip devices. If you want to compile this as a module (=code which can be inserted into and removed from the running kernel), say M here and read <file:Documentation/kbuild/modules.rst>. The module will be called amba-clcd. config FB_ACORN bool "Acorn VIDC support" depends on (FB = y) && ARM && ARCH_ACORN select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Acorn VIDC graphics hardware found in Acorn RISC PCs and other ARM-based machines. If unsure, say N. config FB_CLPS711X tristate "CLPS711X LCD support" depends on FB && (ARCH_CLPS711X || COMPILE_TEST) select FB_MODE_HELPERS select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select LCD_CLASS_DEVICE select VIDEOMODE_HELPERS help Say Y to enable the Framebuffer driver for the Cirrus Logic CLPS711X CPUs. config FB_SA1100 bool "SA-1100 LCD support" depends on (FB = y) && ARM && ARCH_SA1100 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is a framebuffer device for the SA-1100 LCD Controller. See <http://www.linux-fbdev.org/> for information on framebuffer devices. If you plan to use the LCD display with your SA-1100 system, say Y here. config FB_IMX tristate "Freescale i.MX1/21/25/27 LCD support" depends on FB && HAVE_CLK && HAS_IOMEM depends on ARCH_MXC || COMPILE_TEST select LCD_CLASS_DEVICE select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MODE_HELPERS select VIDEOMODE_HELPERS config FB_CYBER2000 tristate "CyberPro 2000/2010/5000 support" depends on FB && PCI && (BROKEN || !SPARC64) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This enables support for the Integraphics CyberPro 20x0 and 5000 VGA chips used in the Rebel.com Netwinder and other machines. Say Y if you have a NetWinder or a graphics card containing this device, otherwise say N. config FB_CYBER2000_DDC bool "DDC for CyberPro support" depends on FB_CYBER2000 select FB_DDC default y help Say Y here if you want DDC support for your CyberPro graphics card. This is only I2C bus support, driver does not use EDID. config FB_CYBER2000_I2C bool "CyberPro 2000/2010/5000 I2C support" depends on FB_CYBER2000 && I2C && ARCH_NETWINDER depends on I2C=y || FB_CYBER2000=m select I2C_ALGOBIT help Enable support for the I2C video decoder interface on the Integraphics CyberPro 20x0 and 5000 VGA chips. This is used on the Netwinder machines for the SAA7111 video capture. config FB_APOLLO bool depends on (FB = y) && APOLLO default y select FB_CFB_FILLRECT select FB_CFB_IMAGEBLIT config FB_Q40 bool depends on (FB = y) && Q40 default y select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT config FB_AMIGA tristate "Amiga native chipset support" depends on FB && AMIGA help This is the frame buffer device driver for the builtin graphics chipset found in Amigas. To compile this driver as a module, choose M here: the module will be called amifb. config FB_AMIGA_OCS bool "Amiga OCS chipset support" depends on FB_AMIGA help This enables support for the original Agnus and Denise video chips, found in the Amiga 1000 and most A500's and A2000's. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_ECS bool "Amiga ECS chipset support" depends on FB_AMIGA help This enables support for the Enhanced Chip Set, found in later A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_AMIGA_AGA bool "Amiga AGA chipset support" depends on FB_AMIGA help This enables support for the Advanced Graphics Architecture (also known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T and CD32. If you intend to run Linux on any of these systems, say Y; otherwise say N. config FB_FM2 bool "Amiga FrameMaster II/Rainbow II support" depends on (FB = y) && ZORRO select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the Amiga FrameMaster card from BSC (exhibited 1992 but not shipped as a CBM product). config FB_ARC tristate "Arc Monochrome LCD board support" depends on FB && (X86 || COMPILE_TEST) select FB_SYS_FILLRECT select FB_SYS_COPYAREA select FB_SYS_IMAGEBLIT select FB_SYS_FOPS help This enables support for the Arc Monochrome LCD board. The board is based on the KS-108 lcd controller and is typically a matrix of 2*n chips. This driver was tested with a 128x64 panel. This driver supports it for use with x86 SBCs through a 16 bit GPIO interface (8 bit data, 8 bit control). If you anticipate using this driver, say Y or M; otherwise say N. You must specify the GPIO IO address to be used for setting control and data. config FB_ATARI bool "Atari native chipset support" depends on (FB = y) && ATARI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help This is the frame buffer device driver for the builtin graphics chipset found in Ataris. config FB_OF bool "Open Firmware frame buffer device support" depends on (FB = y) && PPC && (!PPC_PSERIES || PCI) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help Say Y if you want support with Open Firmware for your graphics board. config FB_CONTROL bool "Apple \"control\" display support" depends on (FB = y) && ((PPC_PMAC && PPC32) || COMPILE_TEST) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help This driver supports a frame buffer for the graphics adapter in the Power Macintosh 7300 and others. config FB_PLATINUM bool "Apple \"platinum\" display support" depends on (FB = y) && PPC_PMAC && PPC32 select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT select FB_MACMODES help This driver supports a frame buffer for the "platinum" graphics adapter in some Power Macintoshes. config FB_VALKYRIE bool "Apple \"valkyrie\" display support" depends on (FB = y) && (MAC || (PPC_PMAC && PPC32)) select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT