// SPDX-License-Identifier: GPL-2.0/* * arch/sh/kernel/cpu/init.c * * CPU init code * * Copyright (C) 2002 - 2009  Paul Mundt * Copyright (C) 2003  Richard Curnow */#include <linux/init.h>#include <linux/kernel.h>#include <linux/mm.h>#include <linux/log2.h>#include <asm/mmu_context.h>#include <asm/processor.h>#include <linux/uaccess.h>#include <asm/page.h>#include <asm/cacheflush.h>#include <asm/cache.h>#include <asm/elf.h>#include <asm/io.h>#include <asm/smp.h>#include <asm/sh_bios.h>#include <asm/setup.h> #ifdef CONFIG_SH_FPU#define cpu_has_fpu	1#else#define cpu_has_fpu	0#endif #ifdef CONFIG_SH_DSP#define cpu_has_dsp	1#else#define cpu_has_dsp	0#endif /* * Generic wrapper for command line arguments to disable on-chip * peripherals (nofpu, nodsp, and so forth). */#define onchip_setup(x)					\static int x##_disabled = !cpu_has_##x;			\							\static int x##_setup(char *opts)			\{							\	x##_disabled = 1;				\	return 1;					\}							\__setup("no" __stringify(x), x##_setup); onchip_setup(fpu);onchip_setup(dsp); #ifdef CONFIG_SPECULATIVE_EXECUTION#define CPUOPM		0xff2f0000#define CPUOPM_RABD	(1 << 5) static void speculative_execution_init(void){	/* Clear RABD */	__raw_writel(__raw_readl(CPUOPM) & ~CPUOPM_RABD, CPUOPM); 	/* Flush the update */	(void)__raw_readl(CPUOPM);	ctrl_barrier();}#else#define speculative_execution_init()	do { } while (0)#endif #ifdef CONFIG_CPU_SH4A#define EXPMASK			0xff2f0004#define EXPMASK_RTEDS		(1 << 0)#define EXPMASK_BRDSSLP		(1 << 1)#define EXPMASK_MMCAW		(1 << 4) static void expmask_init(void){	unsigned long expmask = __raw_readl(EXPMASK); 	/*	 * Future proofing.	 *	 * Disable support for slottable sleep instruction, non-nop	 * instructions in the rte delay slot, and associative writes to	 * the memory-mapped cache array.	 */	expmask &= ~(EXPMASK_RTEDS | EXPMASK_BRDSSLP | EXPMASK_MMCAW); 	__raw_writel(expmask, EXPMASK);	ctrl_barrier();}#else#define expmask_init()	do { } while (0)#endif /* 2nd-level cache init */void __attribute__ ((weak)) l2_cache_init(void){} /* * Generic first-level cache init */#if defined(CONFIG_SUPERH32) && !defined(CONFIG_CPU_J2)static void cache_init(void){	unsigned long ccr, flags; 	jump_to_uncached();	ccr = __raw_readl(SH_CCR); 	/*	 * At this point we don't know whether the cache is enabled or not - a	 * bootloader may have enabled it.  There are at least 2 things that	 * could be dirty in the cache at this point:	 * 1. kernel command line set up by boot loader	 * 2. spilled registers from the prolog of this function	 * => before re-initialising the cache, we must do a purge of the whole	 * cache out to memory for safety.  As long as nothing is spilled	 * during the loop to lines that have already been done, this is safe.	 * - RPC	 */	if (ccr & CCR_CACHE_ENABLE) {		unsigned long ways, waysize, addrstart; 		waysize = current_cpu_data.dcache.sets; #ifdef CCR_CACHE_ORA		/*		 * If the OC is already in RAM mode, we only have		 * half of the entries to flush..		 */		if (ccr & CCR_CACHE_ORA)			waysize >>= 1;#endif 		waysize <<= current_cpu_data.dcache.entry_shift; #ifdef CCR_CACHE_EMODE		/* If EMODE is not set, we only have 1 way to flush. */		if (!(ccr & CCR_CACHE_EMODE))			ways = 1;		else#endif			ways = current_cpu_data.dcache.ways; 		addrstart = CACHE_OC_ADDRESS_ARRAY;		do {			unsigned long addr; 			for (addr = addrstart;			     addr < addrstart + waysize;			     addr += current_cpu_data.dcache.linesz)				__raw_writel(0, addr); 			addrstart += current_cpu_data.dcache.way_incr;		} while (--ways);	} 	/*	 * Default CCR values .. enable the caches	 * and invalidate them immediately..	 */	flags = CCR_CACHE_ENABLE | CCR_CACHE_INVALIDATE; #ifdef CCR_CACHE_EMODE	/* Force EMODE if possible */	if (current_cpu_data.dcache.ways > 1)		flags |= CCR_CACHE_EMODE;	else		flags &= ~CCR_CACHE_EMODE;#endif #if defined(CONFIG_CACHE_WRITETHROUGH)	/* Write-through */	flags |= CCR_CACHE_WT;#elif defined(CONFIG_CACHE_WRITEBACK)	/* Write-back */	flags |= CCR_CACHE_CB;#else	/* Off */	flags &= ~CCR_CACHE_ENABLE;#endif 	l2_cache_init(); 	__raw_writel(flags, SH_CCR);	back_to_cached();}#else#define cache_init()	do { } while (0)#endif #define CSHAPE(totalsize, linesize, assoc) \	((totalsize & ~0xff) | (linesize << 4) | assoc) #define CACHE_DESC_SHAPE(desc)	\	CSHAPE((desc).way_size * (desc).ways, ilog2((desc).linesz), (desc).ways) static void detect_cache_shape(void){	l1d_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.dcache); 	if (current_cpu_data.dcache.flags & SH_CACHE_COMBINED)		l1i_cache_shape = l1d_cache_shape;	else		l1i_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.icache); 	if (current_cpu_data.flags & CPU_HAS_L2_CACHE)		l2_cache_shape = CACHE_DESC_SHAPE(current_cpu_data.scache);	else		l2_cache_shape = -1; /* No S-cache */} static void fpu_init(void){	/* Disable the FPU */	if (fpu_disabled && (current_cpu_data.flags & CPU_HAS_FPU)) {		printk("FPU Disabled\n");		current_cpu_data.flags &= ~CPU_HAS_FPU;	} 	disable_fpu();	clear_used_math();} #ifdef CONFIG_SH_DSPstatic void release_dsp(void){	unsigned long sr; 	/* Clear SR.DSP bit */	__asm__ __volatile__ (		"stc\tsr, %0\n\t"		"and\t%1, %0\n\t"		"ldc\t%0, sr\n\t"		: "=&r" (sr)		: "r" (~SR_DSP)	);} static void dsp_init(void){	unsigned long sr; 	/*	 * Set the SR.DSP bit, wait for one instruction, and then read	 * back the SR value.	 */	__asm__ __volatile__ (		"stc\tsr, %0\n\t"		"or\t%1, %0\n\t"		"ldc\t%0, sr\n\t"		"nop\n\t"		"stc\tsr, %0\n\t"		: "=&r" (sr)		: "r" (SR_DSP)	); 	/* If the DSP bit is still set, this CPU has a DSP */	if (sr & SR_DSP)		current_cpu_data.flags |= CPU_HAS_DSP; 	/* Disable the DSP */	if (dsp_disabled && (current_cpu_data.flags & CPU_HAS_DSP)) {		printk("DSP Disabled\n");		current_cpu_data.flags &= ~CPU_HAS_DSP;	} 	/* Now that we've determined the DSP status, clear the DSP bit. */	release_dsp();}#elsestatic inline void dsp_init(void) { }#endif /* CONFIG_SH_DSP */ /** * cpu_init * * This is our initial entry point for each CPU, and is invoked on the * boot CPU prior to calling start_kernel(). For SMP, a combination of * this and start_secondary() will bring up each processor to a ready * state prior to hand forking the idle loop. * * We do all of the basic processor init here, including setting up * the caches, FPU, DSP, etc. By the time start_kernel() is hit (and * subsequently platform_setup()) things like determining the CPU * subtype and initial configuration will all be done. * * Each processor family is still responsible for doing its own probing * and cache configuration in cpu_probe(). */asmlinkage void cpu_init(void){	current_thread_info()->cpu = hard_smp_processor_id(); 	/* First, probe the CPU */	cpu_probe(); 	if (current_cpu_data.type == CPU_SH_NONE)		panic("Unknown CPU"); 	/* First setup the rest of the I-cache info */	current_cpu_data.icache.entry_mask = current_cpu_data.icache.way_incr -				      current_cpu_data.icache.linesz; 	current_cpu_data.icache.way_size = current_cpu_data.icache.sets *				    current_cpu_data.icache.linesz; 	/* And the D-cache too */	current_cpu_data.dcache.entry_mask = current_cpu_data.dcache.way_incr -				      current_cpu_data.dcache.linesz; 	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *				    current_cpu_data.dcache.linesz; 	/* Init the cache */	cache_init(); 	if (raw_smp_processor_id() == 0) {#ifdef CONFIG_MMU		shm_align_mask = max_t(unsigned long,				       current_cpu_data.dcache.way_size - 1,				       PAGE_SIZE - 1);#else		shm_align_mask = PAGE_SIZE - 1;#endif 		/* Boot CPU sets the cache shape */		detect_cache_shape();	} 	fpu_init();	dsp_init(); 	/*	 * Initialize the per-CPU ASID cache very early, since the	 * TLB flushing routines depend on this being setup.	 */	current_cpu_data.asid_cache = NO_CONTEXT; 	current_cpu_data.phys_bits = __in_29bit_mode() ? 29 : 32; 	speculative_execution_init();	expmask_init(); 	/* Do the rest of the boot processor setup */	if (raw_smp_processor_id() == 0) {		/* Save off the BIOS VBR, if there is one */		sh_bios_vbr_init(); 		/*		 * Setup VBR for boot CPU. Secondary CPUs do this through		 * start_secondary().		 */		per_cpu_trap_init(); 		/*		 * Boot processor to setup the FP and extended state		 * context info.		 */		init_thread_xstate();	}}