/* * Helper macros to support writing architecture specific * linker scripts. * * A minimal linker scripts has following content: * [This is a sample, architectures may have special requiriements] * * OUTPUT_FORMAT(...) * OUTPUT_ARCH(...) * ENTRY(...) * SECTIONS * { * . = START; * __init_begin = .; * HEAD_TEXT_SECTION * INIT_TEXT_SECTION(PAGE_SIZE) * INIT_DATA_SECTION(...) * PERCPU_SECTION(CACHELINE_SIZE) * __init_end = .; * * _stext = .; * TEXT_SECTION = 0 * _etext = .; * * _sdata = .; * RO_DATA_SECTION(PAGE_SIZE) * RW_DATA_SECTION(...) * _edata = .; * * EXCEPTION_TABLE(...) * NOTES * * BSS_SECTION(0, 0, 0) * _end = .; * * STABS_DEBUG * DWARF_DEBUG * * DISCARDS // must be the last * } * * [__init_begin, __init_end] is the init section that may be freed after init * // __init_begin and __init_end should be page aligned, so that we can * // free the whole .init memory * [_stext, _etext] is the text section * [_sdata, _edata] is the data section * * Some of the included output section have their own set of constants. * Examples are: [__initramfs_start, __initramfs_end] for initramfs and * [__nosave_begin, __nosave_end] for the nosave data */ #ifndef LOAD_OFFSET#define LOAD_OFFSET 0#endif /* Align . to a 8 byte boundary equals to maximum function alignment. */#define ALIGN_FUNCTION() . = ALIGN(8) /* * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which * generates .data.identifier sections, which need to be pulled in with * .data. We don't want to pull in .data..other sections, which Linux * has defined. Same for text and bss. * * RODATA_MAIN is not used because existing code already defines .rodata.x * sections to be brought in with rodata. */#ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION#define TEXT_MAIN .text .text.[0-9a-zA-Z_]*#define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX*#define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]*#define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]*#define BSS_MAIN .bss .bss.[0-9a-zA-Z_]*#define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]*#else#define TEXT_MAIN .text#define DATA_MAIN .data#define SDATA_MAIN .sdata#define RODATA_MAIN .rodata#define BSS_MAIN .bss#define SBSS_MAIN .sbss#endif /* * Align to a 32 byte boundary equal to the * alignment gcc 4.5 uses for a struct */#define STRUCT_ALIGNMENT 32#define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT) /* The actual configuration determine if the init/exit sections * are handled as text/data or they can be discarded (which * often happens at runtime) */#ifdef CONFIG_HOTPLUG_CPU#define CPU_KEEP(sec) *(.cpu##sec)#define CPU_DISCARD(sec)#else#define CPU_KEEP(sec)#define CPU_DISCARD(sec) *(.cpu##sec)#endif #if defined(CONFIG_MEMORY_HOTPLUG)#define MEM_KEEP(sec) *(.mem##sec)#define MEM_DISCARD(sec)#else#define MEM_KEEP(sec)#define MEM_DISCARD(sec) *(.mem##sec)#endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD#ifdef CC_USING_PATCHABLE_FUNCTION_ENTRY#define MCOUNT_REC() . = ALIGN(8); \ __start_mcount_loc = .; \ KEEP(*(__patchable_function_entries)) \ __stop_mcount_loc = .;#else#define MCOUNT_REC() . = ALIGN(8); \ __start_mcount_loc = .; \ KEEP(*(__mcount_loc)) \ __stop_mcount_loc = .;#endif#else#define MCOUNT_REC()#endif #ifdef CONFIG_TRACE_BRANCH_PROFILING#define LIKELY_PROFILE() __start_annotated_branch_profile = .; \ KEEP(*(_ftrace_annotated_branch)) \ __stop_annotated_branch_profile = .;#else#define LIKELY_PROFILE()#endif #ifdef CONFIG_PROFILE_ALL_BRANCHES#define BRANCH_PROFILE() __start_branch_profile = .; \ KEEP(*(_ftrace_branch)) \ __stop_branch_profile = .;#else#define BRANCH_PROFILE()#endif #ifdef CONFIG_KPROBES#define KPROBE_BLACKLIST() . = ALIGN(8); \ __start_kprobe_blacklist = .; \ KEEP(*(_kprobe_blacklist)) \ __stop_kprobe_blacklist = .;#else#define KPROBE_BLACKLIST()#endif #ifdef CONFIG_FUNCTION_ERROR_INJECTION#define ERROR_INJECT_WHITELIST() STRUCT_ALIGN(); \ __start_error_injection_whitelist = .; \ KEEP(*(_error_injection_whitelist)) \ __stop_error_injection_whitelist = .;#else#define ERROR_INJECT_WHITELIST()#endif #ifdef CONFIG_EVENT_TRACING#define FTRACE_EVENTS() . = ALIGN(8); \ __start_ftrace_events = .; \ KEEP(*(_ftrace_events)) \ __stop_ftrace_events = .; \ __start_ftrace_eval_maps = .; \ KEEP(*(_ftrace_eval_map)) \ __stop_ftrace_eval_maps = .;#else#define FTRACE_EVENTS()#endif #ifdef CONFIG_TRACING#define TRACE_PRINTKS() __start___trace_bprintk_fmt = .; \ KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \ __stop___trace_bprintk_fmt = .;#define TRACEPOINT_STR() __start___tracepoint_str = .; \ KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \ __stop___tracepoint_str = .;#else#define TRACE_PRINTKS()#define TRACEPOINT_STR()#endif #ifdef CONFIG_FTRACE_SYSCALLS#define TRACE_SYSCALLS() . = ALIGN(8); \ __start_syscalls_metadata = .; \ KEEP(*(__syscalls_metadata)) \ __stop_syscalls_metadata = .;#else#define TRACE_SYSCALLS()#endif #ifdef CONFIG_BPF_EVENTS#define BPF_RAW_TP() STRUCT_ALIGN(); \ __start__bpf_raw_tp = .; \ KEEP(*(__bpf_raw_tp_map)) \ __stop__bpf_raw_tp = .;#else#define BPF_RAW_TP()#endif #ifdef CONFIG_SERIAL_EARLYCON#define EARLYCON_TABLE() . = ALIGN(8); \ __earlycon_table = .; \ KEEP(*(__earlycon_table)) \ __earlycon_table_end = .;#else#define EARLYCON_TABLE()#endif #ifdef CONFIG_SECURITY#define LSM_TABLE() . = ALIGN(8); \ __start_lsm_info = .; \ KEEP(*(.lsm_info.init)) \ __end_lsm_info = .;#define EARLY_LSM_TABLE() . = ALIGN(8); \ __start_early_lsm_info = .; \ KEEP(*(.early_lsm_info.init)) \ __end_early_lsm_info = .;#else#define LSM_TABLE()#define EARLY_LSM_TABLE()#endif #define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name)#define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name)#define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name)#define _OF_TABLE_0(name)#define _OF_TABLE_1(name) \ . = ALIGN(8); \ __##name##_of_table = .; \ KEEP(*(__##name##_of_table)) \ KEEP(*(__##name##_of_table_end)) #define TIMER_OF_TABLES() OF_TABLE(CONFIG_TIMER_OF, timer)#define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip)#define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk)#define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem)#define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method)#define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method) #ifdef CONFIG_ACPI#define ACPI_PROBE_TABLE(name) \ . = ALIGN(8); \ __##name##_acpi_probe_table = .; \ KEEP(*(__##name##_acpi_probe_table)) \ __##name##_acpi_probe_table_end = .;#else#define ACPI_PROBE_TABLE(name)#endif #ifdef CONFIG_THERMAL#define THERMAL_TABLE(name) \ . = ALIGN(8); \ __##name##_thermal_table = .; \ KEEP(*(__##name##_thermal_table)) \ __##name##_thermal_table_end = .;#else#define THERMAL_TABLE(name)#endif #define KERNEL_DTB() \ STRUCT_ALIGN(); \ __dtb_start = .; \ KEEP(*(.dtb.init.rodata)) \ __dtb_end = .; /* * .data section */#define DATA_DATA \ *(.xiptext) \ *(DATA_MAIN) \ *(.ref.data) \ *(.data..shared_aligned) /* percpu related */ \ MEM_KEEP(init.data*) \ MEM_KEEP(exit.data*) \ *(.data.unlikely) \ __start_once = .; \ *(.data.once) \ __end_once = .; \ STRUCT_ALIGN(); \ *(__tracepoints) \ /* implement dynamic printk debug */ \ . = ALIGN(8); \ __start___verbose = .; \ KEEP(*(__verbose)) \ __stop___verbose = .; \ LIKELY_PROFILE() \ BRANCH_PROFILE() \ TRACE_PRINTKS() \ BPF_RAW_TP() \ TRACEPOINT_STR() /* * Data section helpers */#define NOSAVE_DATA \ . = ALIGN(PAGE_SIZE); \ __nosave_begin = .; \ *(.data..nosave) \ . = ALIGN(PAGE_SIZE); \ __nosave_end = .; #define PAGE_ALIGNED_DATA(page_align) \ . = ALIGN(page_align); \ *(.data..page_aligned) #define READ_MOSTLY_DATA(align) \ . = ALIGN(align); \ *(.data..read_mostly) \ . = ALIGN(align); #define CACHELINE_ALIGNED_DATA(align) \ . = ALIGN(align); \ *(.data..cacheline_aligned) #define INIT_TASK_DATA(align) \ . = ALIGN(align); \ __start_init_task = .; \ init_thread_union = .; \ init_stack = .; \ KEEP(*(.data..init_task)) \ KEEP(*(.data..init_thread_info)) \ . = __start_init_task + THREAD_SIZE; \ __end_init_task = .; #define JUMP_TABLE_DATA \ . = ALIGN(8); \ __start___jump_table = .; \ KEEP(*(__jump_table)) \ __stop___jump_table = .; /* * Allow architectures to handle ro_after_init data on their * own by defining an empty RO_AFTER_INIT_DATA. */#ifndef RO_AFTER_INIT_DATA#define RO_AFTER_INIT_DATA \ __start_ro_after_init = .; \ *(.data..ro_after_init) \ JUMP_TABLE_DATA \ __end_ro_after_init = .;#endif /* * Read only Data */#define RO_DATA_SECTION(align) \ . = ALIGN((align)); \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ __start_rodata = .; \ *(.rodata) *(.rodata.*) \ RO_AFTER_INIT_DATA /* Read only after init */ \ . = ALIGN(8); \ __start___tracepoints_ptrs = .; \ KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \ __stop___tracepoints_ptrs = .; \ *(__tracepoints_strings)/* Tracepoints: strings */ \ } \ \ .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \ *(.rodata1) \ } \ \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ __start_pci_fixups_early = .; \ KEEP(*(.pci_fixup_early)) \ __end_pci_fixups_early = .; \ __start_pci_fixups_header = .; \ KEEP(*(.pci_fixup_header)) \ __end_pci_fixups_header = .; \ __start_pci_fixups_final = .; \ KEEP(*(.pci_fixup_final)) \ __end_pci_fixups_final = .; \ __start_pci_fixups_enable = .; \ KEEP(*(.pci_fixup_enable)) \ __end_pci_fixups_enable = .; \ __start_pci_fixups_resume = .; \ KEEP(*(.pci_fixup_resume)) \ __end_pci_fixups_resume = .; \ __start_pci_fixups_resume_early = .; \ KEEP(*(.pci_fixup_resume_early)) \ __end_pci_fixups_resume_early = .; \ __start_pci_fixups_suspend = .; \ KEEP(*(.pci_fixup_suspend)) \ __end_pci_fixups_suspend = .; \ __start_pci_fixups_suspend_late = .; \ KEEP(*(.pci_fixup_suspend_late)) \ __end_pci_fixups_suspend_late = .; \ } \ \ /* Built-in firmware blobs */ \ .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \ __start_builtin_fw = .; \ KEEP(*(.builtin_fw)) \ __end_builtin_fw = .; \ } \ \ TRACEDATA \ \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ __start___ksymtab = .; \ KEEP(*(SORT(___ksymtab+*))) \ __stop___ksymtab = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ __start___ksymtab_gpl = .; \ KEEP(*(SORT(___ksymtab_gpl+*))) \ __stop___ksymtab_gpl = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \ __start___ksymtab_unused = .; \ KEEP(*(SORT(___ksymtab_unused+*))) \ __stop___ksymtab_unused = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \ __start___ksymtab_unused_gpl = .; \ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \ __stop___ksymtab_unused_gpl = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \ __start___ksymtab_gpl_future = .; \ KEEP(*(SORT(___ksymtab_gpl_future+*))) \ __stop___ksymtab_gpl_future = .; \ } \ \ /* Kernel symbol table: Normal symbols */ \ __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \ __start___kcrctab = .; \ KEEP(*(SORT(___kcrctab+*))) \ __stop___kcrctab = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \ __start___kcrctab_gpl = .; \ KEEP(*(SORT(___kcrctab_gpl+*))) \ __stop___kcrctab_gpl = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \ __start___kcrctab_unused = .; \ KEEP(*(SORT(___kcrctab_unused+*))) \ __stop___kcrctab_unused = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \ __start___kcrctab_unused_gpl = .; \ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \ __stop___kcrctab_unused_gpl = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \ __start___kcrctab_gpl_future = .; \ KEEP(*(SORT(___kcrctab_gpl_future+*))) \ __stop___kcrctab_gpl_future = .; \ } \ \ /* Kernel symbol table: strings */ \ __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ *(__ksymtab_strings) \ } \ \ /* __*init sections */ \ __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \ *(.ref.rodata) \ MEM_KEEP(init.rodata) \ MEM_KEEP(exit.rodata) \ } \ \ /* Built-in module parameters. */ \ __param : AT(ADDR(__param) - LOAD_OFFSET) { \ __start___param = .; \ KEEP(*(__param)) \ __stop___param = .; \ } \ \ /* Built-in module versions. */ \ __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \ __start___modver = .; \ KEEP(*(__modver)) \ __stop___modver = .; \ . = ALIGN((align)); \ __end_rodata = .; \Lines 1–500 of 1001. Load more
/* * Helper macros to support writing architecture specific * linker scripts. * * A minimal linker scripts has following content: * [This is a sample, architectures may have special requiriements] * * OUTPUT_FORMAT(...) * OUTPUT_ARCH(...) * ENTRY(...) * SECTIONS * { * . = START; * __init_begin = .; * HEAD_TEXT_SECTION * INIT_TEXT_SECTION(PAGE_SIZE) * INIT_DATA_SECTION(...) * PERCPU_SECTION(CACHELINE_SIZE) * __init_end = .; * * _stext = .; * TEXT_SECTION = 0 * _etext = .; * * _sdata = .; * RO_DATA_SECTION(PAGE_SIZE) * RW_DATA_SECTION(...) * _edata = .; * * EXCEPTION_TABLE(...) * NOTES * * BSS_SECTION(0, 0, 0) * _end = .; * * STABS_DEBUG * DWARF_DEBUG * * DISCARDS // must be the last * } * * [__init_begin, __init_end] is the init section that may be freed after init * // __init_begin and __init_end should be page aligned, so that we can * // free the whole .init memory * [_stext, _etext] is the text section * [_sdata, _edata] is the data section * * Some of the included output section have their own set of constants. * Examples are: [__initramfs_start, __initramfs_end] for initramfs and * [__nosave_begin, __nosave_end] for the nosave data */ #ifndef LOAD_OFFSET #define LOAD_OFFSET 0 #endif /* Align . to a 8 byte boundary equals to maximum function alignment. */ #define ALIGN_FUNCTION() . = ALIGN(8) /* * LD_DEAD_CODE_DATA_ELIMINATION option enables -fdata-sections, which * generates .data.identifier sections, which need to be pulled in with * .data. We don't want to pull in .data..other sections, which Linux * has defined. Same for text and bss. * * RODATA_MAIN is not used because existing code already defines .rodata.x * sections to be brought in with rodata. */ #ifdef CONFIG_LD_DEAD_CODE_DATA_ELIMINATION #define TEXT_MAIN .text .text.[0-9a-zA-Z_]* #define DATA_MAIN .data .data.[0-9a-zA-Z_]* .data..LPBX* #define SDATA_MAIN .sdata .sdata.[0-9a-zA-Z_]* #define RODATA_MAIN .rodata .rodata.[0-9a-zA-Z_]* #define BSS_MAIN .bss .bss.[0-9a-zA-Z_]* #define SBSS_MAIN .sbss .sbss.[0-9a-zA-Z_]* #else #define TEXT_MAIN .text #define DATA_MAIN .data #define SDATA_MAIN .sdata #define RODATA_MAIN .rodata #define BSS_MAIN .bss #define SBSS_MAIN .sbss #endif /* * Align to a 32 byte boundary equal to the * alignment gcc 4.5 uses for a struct */ #define STRUCT_ALIGNMENT 32 #define STRUCT_ALIGN() . = ALIGN(STRUCT_ALIGNMENT) /* The actual configuration determine if the init/exit sections * are handled as text/data or they can be discarded (which * often happens at runtime) */ #ifdef CONFIG_HOTPLUG_CPU #define CPU_KEEP(sec) *(.cpu##sec) #define CPU_DISCARD(sec) #else #define CPU_KEEP(sec) #define CPU_DISCARD(sec) *(.cpu##sec) #endif #if defined(CONFIG_MEMORY_HOTPLUG) #define MEM_KEEP(sec) *(.mem##sec) #define MEM_DISCARD(sec) #else #define MEM_KEEP(sec) #define MEM_DISCARD(sec) *(.mem##sec) #endif #ifdef CONFIG_FTRACE_MCOUNT_RECORD #ifdef CC_USING_PATCHABLE_FUNCTION_ENTRY #define MCOUNT_REC() . = ALIGN(8); \ __start_mcount_loc = .; \ KEEP(*(__patchable_function_entries)) \ __stop_mcount_loc = .; #else #define MCOUNT_REC() . = ALIGN(8); \ __start_mcount_loc = .; \ KEEP(*(__mcount_loc)) \ __stop_mcount_loc = .; #endif #else #define MCOUNT_REC() #endif #ifdef CONFIG_TRACE_BRANCH_PROFILING #define LIKELY_PROFILE() __start_annotated_branch_profile = .; \ KEEP(*(_ftrace_annotated_branch)) \ __stop_annotated_branch_profile = .; #else #define LIKELY_PROFILE() #endif #ifdef CONFIG_PROFILE_ALL_BRANCHES #define BRANCH_PROFILE() __start_branch_profile = .; \ KEEP(*(_ftrace_branch)) \ __stop_branch_profile = .; #else #define BRANCH_PROFILE() #endif #ifdef CONFIG_KPROBES #define KPROBE_BLACKLIST() . = ALIGN(8); \ __start_kprobe_blacklist = .; \ KEEP(*(_kprobe_blacklist)) \ __stop_kprobe_blacklist = .; #else #define KPROBE_BLACKLIST() #endif #ifdef CONFIG_FUNCTION_ERROR_INJECTION #define ERROR_INJECT_WHITELIST() STRUCT_ALIGN(); \ __start_error_injection_whitelist = .; \ KEEP(*(_error_injection_whitelist)) \ __stop_error_injection_whitelist = .; #else #define ERROR_INJECT_WHITELIST() #endif #ifdef CONFIG_EVENT_TRACING #define FTRACE_EVENTS() . = ALIGN(8); \ __start_ftrace_events = .; \ KEEP(*(_ftrace_events)) \ __stop_ftrace_events = .; \ __start_ftrace_eval_maps = .; \ KEEP(*(_ftrace_eval_map)) \ __stop_ftrace_eval_maps = .; #else #define FTRACE_EVENTS() #endif #ifdef CONFIG_TRACING #define TRACE_PRINTKS() __start___trace_bprintk_fmt = .; \ KEEP(*(__trace_printk_fmt)) /* Trace_printk fmt' pointer */ \ __stop___trace_bprintk_fmt = .; #define TRACEPOINT_STR() __start___tracepoint_str = .; \ KEEP(*(__tracepoint_str)) /* Trace_printk fmt' pointer */ \ __stop___tracepoint_str = .; #else #define TRACE_PRINTKS() #define TRACEPOINT_STR() #endif #ifdef CONFIG_FTRACE_SYSCALLS #define TRACE_SYSCALLS() . = ALIGN(8); \ __start_syscalls_metadata = .; \ KEEP(*(__syscalls_metadata)) \ __stop_syscalls_metadata = .; #else #define TRACE_SYSCALLS() #endif #ifdef CONFIG_BPF_EVENTS #define BPF_RAW_TP() STRUCT_ALIGN(); \ __start__bpf_raw_tp = .; \ KEEP(*(__bpf_raw_tp_map)) \ __stop__bpf_raw_tp = .; #else #define BPF_RAW_TP() #endif #ifdef CONFIG_SERIAL_EARLYCON #define EARLYCON_TABLE() . = ALIGN(8); \ __earlycon_table = .; \ KEEP(*(__earlycon_table)) \ __earlycon_table_end = .; #else #define EARLYCON_TABLE() #endif #ifdef CONFIG_SECURITY #define LSM_TABLE() . = ALIGN(8); \ __start_lsm_info = .; \ KEEP(*(.lsm_info.init)) \ __end_lsm_info = .; #define EARLY_LSM_TABLE() . = ALIGN(8); \ __start_early_lsm_info = .; \ KEEP(*(.early_lsm_info.init)) \ __end_early_lsm_info = .; #else #define LSM_TABLE() #define EARLY_LSM_TABLE() #endif #define ___OF_TABLE(cfg, name) _OF_TABLE_##cfg(name) #define __OF_TABLE(cfg, name) ___OF_TABLE(cfg, name) #define OF_TABLE(cfg, name) __OF_TABLE(IS_ENABLED(cfg), name) #define _OF_TABLE_0(name) #define _OF_TABLE_1(name) \ . = ALIGN(8); \ __##name##_of_table = .; \ KEEP(*(__##name##_of_table)) \ KEEP(*(__##name##_of_table_end)) #define TIMER_OF_TABLES() OF_TABLE(CONFIG_TIMER_OF, timer) #define IRQCHIP_OF_MATCH_TABLE() OF_TABLE(CONFIG_IRQCHIP, irqchip) #define CLK_OF_TABLES() OF_TABLE(CONFIG_COMMON_CLK, clk) #define RESERVEDMEM_OF_TABLES() OF_TABLE(CONFIG_OF_RESERVED_MEM, reservedmem) #define CPU_METHOD_OF_TABLES() OF_TABLE(CONFIG_SMP, cpu_method) #define CPUIDLE_METHOD_OF_TABLES() OF_TABLE(CONFIG_CPU_IDLE, cpuidle_method) #ifdef CONFIG_ACPI #define ACPI_PROBE_TABLE(name) \ . = ALIGN(8); \ __##name##_acpi_probe_table = .; \ KEEP(*(__##name##_acpi_probe_table)) \ __##name##_acpi_probe_table_end = .; #else #define ACPI_PROBE_TABLE(name) #endif #ifdef CONFIG_THERMAL #define THERMAL_TABLE(name) \ . = ALIGN(8); \ __##name##_thermal_table = .; \ KEEP(*(__##name##_thermal_table)) \ __##name##_thermal_table_end = .; #else #define THERMAL_TABLE(name) #endif #define KERNEL_DTB() \ STRUCT_ALIGN(); \ __dtb_start = .; \ KEEP(*(.dtb.init.rodata)) \ __dtb_end = .; /* * .data section */ #define DATA_DATA \ *(.xiptext) \ *(DATA_MAIN) \ *(.ref.data) \ *(.data..shared_aligned) /* percpu related */ \ MEM_KEEP(init.data*) \ MEM_KEEP(exit.data*) \ *(.data.unlikely) \ __start_once = .; \ *(.data.once) \ __end_once = .; \ STRUCT_ALIGN(); \ *(__tracepoints) \ /* implement dynamic printk debug */ \ . = ALIGN(8); \ __start___verbose = .; \ KEEP(*(__verbose)) \ __stop___verbose = .; \ LIKELY_PROFILE() \ BRANCH_PROFILE() \ TRACE_PRINTKS() \ BPF_RAW_TP() \ TRACEPOINT_STR() /* * Data section helpers */ #define NOSAVE_DATA \ . = ALIGN(PAGE_SIZE); \ __nosave_begin = .; \ *(.data..nosave) \ . = ALIGN(PAGE_SIZE); \ __nosave_end = .; #define PAGE_ALIGNED_DATA(page_align) \ . = ALIGN(page_align); \ *(.data..page_aligned) #define READ_MOSTLY_DATA(align) \ . = ALIGN(align); \ *(.data..read_mostly) \ . = ALIGN(align); #define CACHELINE_ALIGNED_DATA(align) \ . = ALIGN(align); \ *(.data..cacheline_aligned) #define INIT_TASK_DATA(align) \ . = ALIGN(align); \ __start_init_task = .; \ init_thread_union = .; \ init_stack = .; \ KEEP(*(.data..init_task)) \ KEEP(*(.data..init_thread_info)) \ . = __start_init_task + THREAD_SIZE; \ __end_init_task = .; #define JUMP_TABLE_DATA \ . = ALIGN(8); \ __start___jump_table = .; \ KEEP(*(__jump_table)) \ __stop___jump_table = .; /* * Allow architectures to handle ro_after_init data on their * own by defining an empty RO_AFTER_INIT_DATA. */ #ifndef RO_AFTER_INIT_DATA #define RO_AFTER_INIT_DATA \ __start_ro_after_init = .; \ *(.data..ro_after_init) \ JUMP_TABLE_DATA \ __end_ro_after_init = .; #endif /* * Read only Data */ #define RO_DATA_SECTION(align) \ . = ALIGN((align)); \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ __start_rodata = .; \ *(.rodata) *(.rodata.*) \ RO_AFTER_INIT_DATA /* Read only after init */ \ . = ALIGN(8); \ __start___tracepoints_ptrs = .; \ KEEP(*(__tracepoints_ptrs)) /* Tracepoints: pointer array */ \ __stop___tracepoints_ptrs = .; \ *(__tracepoints_strings)/* Tracepoints: strings */ \ } \ \ .rodata1 : AT(ADDR(.rodata1) - LOAD_OFFSET) { \ *(.rodata1) \ } \ \ /* PCI quirks */ \ .pci_fixup : AT(ADDR(.pci_fixup) - LOAD_OFFSET) { \ __start_pci_fixups_early = .; \ KEEP(*(.pci_fixup_early)) \ __end_pci_fixups_early = .; \ __start_pci_fixups_header = .; \ KEEP(*(.pci_fixup_header)) \ __end_pci_fixups_header = .; \ __start_pci_fixups_final = .; \ KEEP(*(.pci_fixup_final)) \ __end_pci_fixups_final = .; \ __start_pci_fixups_enable = .; \ KEEP(*(.pci_fixup_enable)) \ __end_pci_fixups_enable = .; \ __start_pci_fixups_resume = .; \ KEEP(*(.pci_fixup_resume)) \ __end_pci_fixups_resume = .; \ __start_pci_fixups_resume_early = .; \ KEEP(*(.pci_fixup_resume_early)) \ __end_pci_fixups_resume_early = .; \ __start_pci_fixups_suspend = .; \ KEEP(*(.pci_fixup_suspend)) \ __end_pci_fixups_suspend = .; \ __start_pci_fixups_suspend_late = .; \ KEEP(*(.pci_fixup_suspend_late)) \ __end_pci_fixups_suspend_late = .; \ } \ \ /* Built-in firmware blobs */ \ .builtin_fw : AT(ADDR(.builtin_fw) - LOAD_OFFSET) { \ __start_builtin_fw = .; \ KEEP(*(.builtin_fw)) \ __end_builtin_fw = .; \ } \ \ TRACEDATA \ \ /* Kernel symbol table: Normal symbols */ \ __ksymtab : AT(ADDR(__ksymtab) - LOAD_OFFSET) { \ __start___ksymtab = .; \ KEEP(*(SORT(___ksymtab+*))) \ __stop___ksymtab = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __ksymtab_gpl : AT(ADDR(__ksymtab_gpl) - LOAD_OFFSET) { \ __start___ksymtab_gpl = .; \ KEEP(*(SORT(___ksymtab_gpl+*))) \ __stop___ksymtab_gpl = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __ksymtab_unused : AT(ADDR(__ksymtab_unused) - LOAD_OFFSET) { \ __start___ksymtab_unused = .; \ KEEP(*(SORT(___ksymtab_unused+*))) \ __stop___ksymtab_unused = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __ksymtab_unused_gpl : AT(ADDR(__ksymtab_unused_gpl) - LOAD_OFFSET) { \ __start___ksymtab_unused_gpl = .; \ KEEP(*(SORT(___ksymtab_unused_gpl+*))) \ __stop___ksymtab_unused_gpl = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __ksymtab_gpl_future : AT(ADDR(__ksymtab_gpl_future) - LOAD_OFFSET) { \ __start___ksymtab_gpl_future = .; \ KEEP(*(SORT(___ksymtab_gpl_future+*))) \ __stop___ksymtab_gpl_future = .; \ } \ \ /* Kernel symbol table: Normal symbols */ \ __kcrctab : AT(ADDR(__kcrctab) - LOAD_OFFSET) { \ __start___kcrctab = .; \ KEEP(*(SORT(___kcrctab+*))) \ __stop___kcrctab = .; \ } \ \ /* Kernel symbol table: GPL-only symbols */ \ __kcrctab_gpl : AT(ADDR(__kcrctab_gpl) - LOAD_OFFSET) { \ __start___kcrctab_gpl = .; \ KEEP(*(SORT(___kcrctab_gpl+*))) \ __stop___kcrctab_gpl = .; \ } \ \ /* Kernel symbol table: Normal unused symbols */ \ __kcrctab_unused : AT(ADDR(__kcrctab_unused) - LOAD_OFFSET) { \ __start___kcrctab_unused = .; \ KEEP(*(SORT(___kcrctab_unused+*))) \ __stop___kcrctab_unused = .; \ } \ \ /* Kernel symbol table: GPL-only unused symbols */ \ __kcrctab_unused_gpl : AT(ADDR(__kcrctab_unused_gpl) - LOAD_OFFSET) { \ __start___kcrctab_unused_gpl = .; \ KEEP(*(SORT(___kcrctab_unused_gpl+*))) \ __stop___kcrctab_unused_gpl = .; \ } \ \ /* Kernel symbol table: GPL-future-only symbols */ \ __kcrctab_gpl_future : AT(ADDR(__kcrctab_gpl_future) - LOAD_OFFSET) { \ __start___kcrctab_gpl_future = .; \ KEEP(*(SORT(___kcrctab_gpl_future+*))) \ __stop___kcrctab_gpl_future = .; \ } \ \ /* Kernel symbol table: strings */ \ __ksymtab_strings : AT(ADDR(__ksymtab_strings) - LOAD_OFFSET) { \ *(__ksymtab_strings) \ } \ \ /* __*init sections */ \ __init_rodata : AT(ADDR(__init_rodata) - LOAD_OFFSET) { \ *(.ref.rodata) \ MEM_KEEP(init.rodata) \ MEM_KEEP(exit.rodata) \ } \ \ /* Built-in module parameters. */ \ __param : AT(ADDR(__param) - LOAD_OFFSET) { \ __start___param = .; \ KEEP(*(__param)) \ __stop___param = .; \ } \ \ /* Built-in module versions. */ \ __modver : AT(ADDR(__modver) - LOAD_OFFSET) { \ __start___modver = .; \ KEEP(*(__modver)) \ __stop___modver = .; \ . = ALIGN((align)); \ __end_rodata = .; \