// SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved. * Copyright (C) 2018-2020 Linaro Ltd. */ #include <linux/atomic.h>#include <linux/mutex.h>#include <linux/clk.h>#include <linux/device.h>#include <linux/interconnect.h> #include "ipa.h"#include "ipa_clock.h"#include "ipa_modem.h" /** * DOC: IPA Clocking * * The "IPA Clock" manages both the IPA core clock and the interconnects * (buses) the IPA depends on as a single logical entity. A reference count * is incremented by "get" operations and decremented by "put" operations. * Transitions of that count from 0 to 1 result in the clock and interconnects * being enabled, and transitions of the count from 1 to 0 cause them to be * disabled. We currently operate the core clock at a fixed clock rate, and * all buses at a fixed average and peak bandwidth. As more advanced IPA * features are enabled, we can make better use of clock and bus scaling. * * An IPA clock reference must be held for any access to IPA hardware. */ #define IPA_CORE_CLOCK_RATE (75UL * 1000 * 1000) /* Hz */ /* Interconnect path bandwidths (each times 1000 bytes per second) */#define IPA_MEMORY_AVG (80 * 1000) /* 80 MBps */#define IPA_MEMORY_PEAK (600 * 1000) #define IPA_IMEM_AVG (80 * 1000)#define IPA_IMEM_PEAK (350 * 1000) #define IPA_CONFIG_AVG (40 * 1000)#define IPA_CONFIG_PEAK (40 * 1000) /** * struct ipa_clock - IPA clocking information * @count: Clocking reference count * @mutex; Protects clock enable/disable * @core: IPA core clock * @memory_path: Memory interconnect * @imem_path: Internal memory interconnect * @config_path: Configuration space interconnect */struct ipa_clock { atomic_t count; struct mutex mutex; /* protects clock enable/disable */ struct clk *core; struct icc_path *memory_path; struct icc_path *imem_path; struct icc_path *config_path;}; static struct icc_path *ipa_interconnect_init_one(struct device *dev, const char *name){ struct icc_path *path; path = of_icc_get(dev, name); if (IS_ERR(path)) dev_err(dev, "error %ld getting memory interconnect\n", PTR_ERR(path)); return path;} /* Initialize interconnects required for IPA operation */static int ipa_interconnect_init(struct ipa_clock *clock, struct device *dev){ struct icc_path *path; path = ipa_interconnect_init_one(dev, "memory"); if (IS_ERR(path)) goto err_return; clock->memory_path = path; path = ipa_interconnect_init_one(dev, "imem"); if (IS_ERR(path)) goto err_memory_path_put; clock->imem_path = path; path = ipa_interconnect_init_one(dev, "config"); if (IS_ERR(path)) goto err_imem_path_put; clock->config_path = path; return 0; err_imem_path_put: icc_put(clock->imem_path);err_memory_path_put: icc_put(clock->memory_path);err_return: return PTR_ERR(path);} /* Inverse of ipa_interconnect_init() */static void ipa_interconnect_exit(struct ipa_clock *clock){ icc_put(clock->config_path); icc_put(clock->imem_path); icc_put(clock->memory_path);} /* Currently we only use one bandwidth level, so just "enable" interconnects */static int ipa_interconnect_enable(struct ipa *ipa){ struct ipa_clock *clock = ipa->clock; int ret; ret = icc_set_bw(clock->memory_path, IPA_MEMORY_AVG, IPA_MEMORY_PEAK); if (ret) return ret; ret = icc_set_bw(clock->imem_path, IPA_IMEM_AVG, IPA_IMEM_PEAK); if (ret) goto err_memory_path_disable; ret = icc_set_bw(clock->config_path, IPA_CONFIG_AVG, IPA_CONFIG_PEAK); if (ret) goto err_imem_path_disable; return 0; err_imem_path_disable: (void)icc_set_bw(clock->imem_path, 0, 0);err_memory_path_disable: (void)icc_set_bw(clock->memory_path, 0, 0); return ret;} /* To disable an interconnect, we just its bandwidth to 0 */static int ipa_interconnect_disable(struct ipa *ipa){ struct ipa_clock *clock = ipa->clock; int ret; ret = icc_set_bw(clock->memory_path, 0, 0); if (ret) return ret; ret = icc_set_bw(clock->imem_path, 0, 0); if (ret) goto err_memory_path_reenable; ret = icc_set_bw(clock->config_path, 0, 0); if (ret) goto err_imem_path_reenable; return 0; err_imem_path_reenable: (void)icc_set_bw(clock->imem_path, IPA_IMEM_AVG, IPA_IMEM_PEAK);err_memory_path_reenable: (void)icc_set_bw(clock->memory_path, IPA_MEMORY_AVG, IPA_MEMORY_PEAK); return ret;} /* Turn on IPA clocks, including interconnects */static int ipa_clock_enable(struct ipa *ipa){ int ret; ret = ipa_interconnect_enable(ipa); if (ret) return ret; ret = clk_prepare_enable(ipa->clock->core); if (ret) ipa_interconnect_disable(ipa); return ret;} /* Inverse of ipa_clock_enable() */static void ipa_clock_disable(struct ipa *ipa){ clk_disable_unprepare(ipa->clock->core); (void)ipa_interconnect_disable(ipa);} /* Get an IPA clock reference, but only if the reference count is * already non-zero. Returns true if the additional reference was * added successfully, or false otherwise. */bool ipa_clock_get_additional(struct ipa *ipa){ return !!atomic_inc_not_zero(&ipa->clock->count);} /* Get an IPA clock reference. If the reference count is non-zero, it is * incremented and return is immediate. Otherwise it is checked again * under protection of the mutex, and if appropriate the clock (and * interconnects) are enabled suspended endpoints (if any) are resumed * before returning. * * Incrementing the reference count is intentionally deferred until * after the clock is running and endpoints are resumed. */void ipa_clock_get(struct ipa *ipa){ struct ipa_clock *clock = ipa->clock; int ret; /* If the clock is running, just bump the reference count */ if (ipa_clock_get_additional(ipa)) return; /* Otherwise get the mutex and check again */ mutex_lock(&clock->mutex); /* A reference might have been added before we got the mutex. */ if (ipa_clock_get_additional(ipa)) goto out_mutex_unlock; ret = ipa_clock_enable(ipa); if (ret) { dev_err(&ipa->pdev->dev, "error %d enabling IPA clock\n", ret); goto out_mutex_unlock; } ipa_endpoint_resume(ipa); atomic_inc(&clock->count); out_mutex_unlock: mutex_unlock(&clock->mutex);} /* Attempt to remove an IPA clock reference. If this represents the last * reference, suspend endpoints and disable the clock (and interconnects) * under protection of a mutex. */void ipa_clock_put(struct ipa *ipa){ struct ipa_clock *clock = ipa->clock; /* If this is not the last reference there's nothing more to do */ if (!atomic_dec_and_mutex_lock(&clock->count, &clock->mutex)) return; ipa_endpoint_suspend(ipa); ipa_clock_disable(ipa); mutex_unlock(&clock->mutex);} /* Initialize IPA clocking */struct ipa_clock *ipa_clock_init(struct device *dev){ struct ipa_clock *clock; struct clk *clk; int ret; clk = clk_get(dev, "core"); if (IS_ERR(clk)) { dev_err(dev, "error %ld getting core clock\n", PTR_ERR(clk)); return ERR_CAST(clk); } ret = clk_set_rate(clk, IPA_CORE_CLOCK_RATE); if (ret) { dev_err(dev, "error %d setting core clock rate to %lu\n", ret, IPA_CORE_CLOCK_RATE); goto err_clk_put; } clock = kzalloc(sizeof(*clock), GFP_KERNEL); if (!clock) { ret = -ENOMEM; goto err_clk_put; } clock->core = clk; ret = ipa_interconnect_init(clock, dev); if (ret) goto err_kfree; mutex_init(&clock->mutex); atomic_set(&clock->count, 0); return clock; err_kfree: kfree(clock);err_clk_put: clk_put(clk); return ERR_PTR(ret);} /* Inverse of ipa_clock_init() */void ipa_clock_exit(struct ipa_clock *clock){ struct clk *clk = clock->core; WARN_ON(atomic_read(&clock->count) != 0); mutex_destroy(&clock->mutex); ipa_interconnect_exit(clock); kfree(clock); clk_put(clk);}
// SPDX-License-Identifier: GPL-2.0
/* Copyright (c) 2012-2018, The Linux Foundation. All rights reserved.
* Copyright (C) 2018-2020 Linaro Ltd.
*/
#include <linux/atomic.h>
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/interconnect.h>
#include "ipa.h"
#include "ipa_clock.h"
#include "ipa_modem.h"
/**
* DOC: IPA Clocking
*
* The "IPA Clock" manages both the IPA core clock and the interconnects
* (buses) the IPA depends on as a single logical entity. A reference count
* is incremented by "get" operations and decremented by "put" operations.
* Transitions of that count from 0 to 1 result in the clock and interconnects
* being enabled, and transitions of the count from 1 to 0 cause them to be
* disabled. We currently operate the core clock at a fixed clock rate, and
* all buses at a fixed average and peak bandwidth. As more advanced IPA
* features are enabled, we can make better use of clock and bus scaling.
*
* An IPA clock reference must be held for any access to IPA hardware.
*/
#define IPA_CORE_CLOCK_RATE (75UL * 1000 * 1000) /* Hz */
/* Interconnect path bandwidths (each times 1000 bytes per second) */
#define IPA_MEMORY_AVG (80 * 1000) /* 80 MBps */
#define IPA_MEMORY_PEAK (600 * 1000)
#define IPA_IMEM_AVG (80 * 1000)
#define IPA_IMEM_PEAK (350 * 1000)
#define IPA_CONFIG_AVG (40 * 1000)
#define IPA_CONFIG_PEAK (40 * 1000)
/**
* struct ipa_clock - IPA clocking information
* @count: Clocking reference count
* @mutex; Protects clock enable/disable
* @core: IPA core clock
* @memory_path: Memory interconnect
* @imem_path: Internal memory interconnect
* @config_path: Configuration space interconnect
*/
struct ipa_clock {
atomic_t count;
struct mutex mutex; /* protects clock enable/disable */
struct clk *core;
struct icc_path *memory_path;
struct icc_path *imem_path;
struct icc_path *config_path;
};
static struct icc_path *
ipa_interconnect_init_one(struct device *dev, const char *name)
{
struct icc_path *path;
path = of_icc_get(dev, name);
if (IS_ERR(path))
dev_err(dev, "error %ld getting memory interconnect\n",
PTR_ERR(path));
return path;
}
/* Initialize interconnects required for IPA operation */
static int ipa_interconnect_init(struct ipa_clock *clock, struct device *dev)
{
struct icc_path *path;
path = ipa_interconnect_init_one(dev, "memory");
if (IS_ERR(path))
goto err_return;
clock->memory_path = path;
path = ipa_interconnect_init_one(dev, "imem");
if (IS_ERR(path))
goto err_memory_path_put;
clock->imem_path = path;
path = ipa_interconnect_init_one(dev, "config");
if (IS_ERR(path))
goto err_imem_path_put;
clock->config_path = path;
return 0;
err_imem_path_put:
icc_put(clock->imem_path);
err_memory_path_put:
icc_put(clock->memory_path);
err_return:
return PTR_ERR(path);
}
/* Inverse of ipa_interconnect_init() */
static void ipa_interconnect_exit(struct ipa_clock *clock)
{
icc_put(clock->config_path);
icc_put(clock->imem_path);
icc_put(clock->memory_path);
}
/* Currently we only use one bandwidth level, so just "enable" interconnects */
static int ipa_interconnect_enable(struct ipa *ipa)
{
struct ipa_clock *clock = ipa->clock;
int ret;
ret = icc_set_bw(clock->memory_path, IPA_MEMORY_AVG, IPA_MEMORY_PEAK);
if (ret)
return ret;
ret = icc_set_bw(clock->imem_path, IPA_IMEM_AVG, IPA_IMEM_PEAK);
if (ret)
goto err_memory_path_disable;
ret = icc_set_bw(clock->config_path, IPA_CONFIG_AVG, IPA_CONFIG_PEAK);
if (ret)
goto err_imem_path_disable;
return 0;
err_imem_path_disable:
(void)icc_set_bw(clock->imem_path, 0, 0);
err_memory_path_disable:
(void)icc_set_bw(clock->memory_path, 0, 0);
return ret;
}
/* To disable an interconnect, we just its bandwidth to 0 */
static int ipa_interconnect_disable(struct ipa *ipa)
{
struct ipa_clock *clock = ipa->clock;
int ret;
ret = icc_set_bw(clock->memory_path, 0, 0);
if (ret)
return ret;
ret = icc_set_bw(clock->imem_path, 0, 0);
if (ret)
goto err_memory_path_reenable;
ret = icc_set_bw(clock->config_path, 0, 0);
if (ret)
goto err_imem_path_reenable;
return 0;
err_imem_path_reenable:
(void)icc_set_bw(clock->imem_path, IPA_IMEM_AVG, IPA_IMEM_PEAK);
err_memory_path_reenable:
(void)icc_set_bw(clock->memory_path, IPA_MEMORY_AVG, IPA_MEMORY_PEAK);
return ret;
}
/* Turn on IPA clocks, including interconnects */
static int ipa_clock_enable(struct ipa *ipa)
{
int ret;
ret = ipa_interconnect_enable(ipa);
if (ret)
return ret;
ret = clk_prepare_enable(ipa->clock->core);
if (ret)
ipa_interconnect_disable(ipa);
return ret;
}
/* Inverse of ipa_clock_enable() */
static void ipa_clock_disable(struct ipa *ipa)
{
clk_disable_unprepare(ipa->clock->core);
(void)ipa_interconnect_disable(ipa);
}
/* Get an IPA clock reference, but only if the reference count is
* already non-zero. Returns true if the additional reference was
* added successfully, or false otherwise.
*/
bool ipa_clock_get_additional(struct ipa *ipa)
{
return !!atomic_inc_not_zero(&ipa->clock->count);
}
/* Get an IPA clock reference. If the reference count is non-zero, it is
* incremented and return is immediate. Otherwise it is checked again
* under protection of the mutex, and if appropriate the clock (and
* interconnects) are enabled suspended endpoints (if any) are resumed
* before returning.
*
* Incrementing the reference count is intentionally deferred until
* after the clock is running and endpoints are resumed.
*/
void ipa_clock_get(struct ipa *ipa)
{
struct ipa_clock *clock = ipa->clock;
int ret;
/* If the clock is running, just bump the reference count */
if (ipa_clock_get_additional(ipa))
return;
/* Otherwise get the mutex and check again */
mutex_lock(&clock->mutex);
/* A reference might have been added before we got the mutex. */
if (ipa_clock_get_additional(ipa))
goto out_mutex_unlock;
ret = ipa_clock_enable(ipa);
if (ret) {
dev_err(&ipa->pdev->dev, "error %d enabling IPA clock\n", ret);
goto out_mutex_unlock;
}
ipa_endpoint_resume(ipa);
atomic_inc(&clock->count);
out_mutex_unlock:
mutex_unlock(&clock->mutex);
}
/* Attempt to remove an IPA clock reference. If this represents the last
* reference, suspend endpoints and disable the clock (and interconnects)
* under protection of a mutex.
*/
void ipa_clock_put(struct ipa *ipa)
{
struct ipa_clock *clock = ipa->clock;
/* If this is not the last reference there's nothing more to do */
if (!atomic_dec_and_mutex_lock(&clock->count, &clock->mutex))
return;
ipa_endpoint_suspend(ipa);
ipa_clock_disable(ipa);
mutex_unlock(&clock->mutex);
}
/* Initialize IPA clocking */
struct ipa_clock *ipa_clock_init(struct device *dev)
{
struct ipa_clock *clock;
struct clk *clk;
int ret;
clk = clk_get(dev, "core");
if (IS_ERR(clk)) {
dev_err(dev, "error %ld getting core clock\n", PTR_ERR(clk));
return ERR_CAST(clk);
}
ret = clk_set_rate(clk, IPA_CORE_CLOCK_RATE);
if (ret) {
dev_err(dev, "error %d setting core clock rate to %lu\n",
ret, IPA_CORE_CLOCK_RATE);
goto err_clk_put;
}
clock = kzalloc(sizeof(*clock), GFP_KERNEL);
if (!clock) {
ret = -ENOMEM;
goto err_clk_put;
}
clock->core = clk;
ret = ipa_interconnect_init(clock, dev);
if (ret)
goto err_kfree;
mutex_init(&clock->mutex);
atomic_set(&clock->count, 0);
return clock;
err_kfree:
kfree(clock);
err_clk_put:
clk_put(clk);
return ERR_PTR(ret);
}
/* Inverse of ipa_clock_init() */
void ipa_clock_exit(struct ipa_clock *clock)
{
struct clk *clk = clock->core;
WARN_ON(atomic_read(&clock->count) != 0);
mutex_destroy(&clock->mutex);
ipa_interconnect_exit(clock);
kfree(clock);
clk_put(clk);
}