308 lines · 12.1 KB · C
RawDownload
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */#ifndef _UAPI_LINUX_FS_H#define _UAPI_LINUX_FS_H /* * This file has definitions for some important file table structures * and constants and structures used by various generic file system * ioctl's.  Please do not make any changes in this file before * sending patches for review to linux-fsdevel@vger.kernel.org and * linux-api@vger.kernel.org. */ #include <linux/limits.h>#include <linux/ioctl.h>#include <linux/types.h>#ifndef __KERNEL__#include <linux/fscrypt.h>#endif /* Use of MS_* flags within the kernel is restricted to core mount(2) code. */#if !defined(__KERNEL__)#include <linux/mount.h>#endif /* * It's silly to have NR_OPEN bigger than NR_FILE, but you can change * the file limit at runtime and only root can increase the per-process * nr_file rlimit, so it's safe to set up a ridiculously high absolute * upper limit on files-per-process. * * Some programs (notably those using select()) may have to be  * recompiled to take full advantage of the new limits..   */ /* Fixed constants first: */#undef NR_OPEN#define INR_OPEN_CUR 1024	/* Initial setting for nfile rlimits */#define INR_OPEN_MAX 4096	/* Hard limit for nfile rlimits */ #define BLOCK_SIZE_BITS 10#define BLOCK_SIZE (1<<BLOCK_SIZE_BITS) #define SEEK_SET	0	/* seek relative to beginning of file */#define SEEK_CUR	1	/* seek relative to current file position */#define SEEK_END	2	/* seek relative to end of file */#define SEEK_DATA	3	/* seek to the next data */#define SEEK_HOLE	4	/* seek to the next hole */#define SEEK_MAX	SEEK_HOLE #define RENAME_NOREPLACE	(1 << 0)	/* Don't overwrite target */#define RENAME_EXCHANGE		(1 << 1)	/* Exchange source and dest */#define RENAME_WHITEOUT		(1 << 2)	/* Whiteout source */ struct file_clone_range {	__s64 src_fd;	__u64 src_offset;	__u64 src_length;	__u64 dest_offset;}; struct fstrim_range {	__u64 start;	__u64 len;	__u64 minlen;}; /* extent-same (dedupe) ioctls; these MUST match the btrfs ioctl definitions */#define FILE_DEDUPE_RANGE_SAME		0#define FILE_DEDUPE_RANGE_DIFFERS	1 /* from struct btrfs_ioctl_file_extent_same_info */struct file_dedupe_range_info {	__s64 dest_fd;		/* in - destination file */	__u64 dest_offset;	/* in - start of extent in destination */	__u64 bytes_deduped;	/* out - total # of bytes we were able				 * to dedupe from this file. */	/* status of this dedupe operation:	 * < 0 for error	 * == FILE_DEDUPE_RANGE_SAME if dedupe succeeds	 * == FILE_DEDUPE_RANGE_DIFFERS if data differs	 */	__s32 status;		/* out - see above description */	__u32 reserved;		/* must be zero */}; /* from struct btrfs_ioctl_file_extent_same_args */struct file_dedupe_range {	__u64 src_offset;	/* in - start of extent in source */	__u64 src_length;	/* in - length of extent */	__u16 dest_count;	/* in - total elements in info array */	__u16 reserved1;	/* must be zero */	__u32 reserved2;	/* must be zero */	struct file_dedupe_range_info info[];}; /* And dynamically-tunable limits and defaults: */struct files_stat_struct {	unsigned long nr_files;		/* read only */	unsigned long nr_free_files;	/* read only */	unsigned long max_files;		/* tunable */}; struct inodes_stat_t {	long nr_inodes;	long nr_unused;	long dummy[5];		/* padding for sysctl ABI compatibility */};  #define NR_FILE  8192	/* this can well be larger on a larger system */ /* * Structure for FS_IOC_FSGETXATTR[A] and FS_IOC_FSSETXATTR. */struct fsxattr {	__u32		fsx_xflags;	/* xflags field value (get/set) */	__u32		fsx_extsize;	/* extsize field value (get/set)*/	__u32		fsx_nextents;	/* nextents field value (get)	*/	__u32		fsx_projid;	/* project identifier (get/set) */	__u32		fsx_cowextsize;	/* CoW extsize field value (get/set)*/	unsigned char	fsx_pad[8];}; /* * Flags for the fsx_xflags field */#define FS_XFLAG_REALTIME	0x00000001	/* data in realtime volume */#define FS_XFLAG_PREALLOC	0x00000002	/* preallocated file extents */#define FS_XFLAG_IMMUTABLE	0x00000008	/* file cannot be modified */#define FS_XFLAG_APPEND		0x00000010	/* all writes append */#define FS_XFLAG_SYNC		0x00000020	/* all writes synchronous */#define FS_XFLAG_NOATIME	0x00000040	/* do not update access time */#define FS_XFLAG_NODUMP		0x00000080	/* do not include in backups */#define FS_XFLAG_RTINHERIT	0x00000100	/* create with rt bit set */#define FS_XFLAG_PROJINHERIT	0x00000200	/* create with parents projid */#define FS_XFLAG_NOSYMLINKS	0x00000400	/* disallow symlink creation */#define FS_XFLAG_EXTSIZE	0x00000800	/* extent size allocator hint */#define FS_XFLAG_EXTSZINHERIT	0x00001000	/* inherit inode extent size */#define FS_XFLAG_NODEFRAG	0x00002000	/* do not defragment */#define FS_XFLAG_FILESTREAM	0x00004000	/* use filestream allocator */#define FS_XFLAG_DAX		0x00008000	/* use DAX for IO */#define FS_XFLAG_COWEXTSIZE	0x00010000	/* CoW extent size allocator hint */#define FS_XFLAG_HASATTR	0x80000000	/* no DIFLAG for this	*/ /* the read-only stuff doesn't really belong here, but any other place is   probably as bad and I don't want to create yet another include file. */ #define BLKROSET   _IO(0x12,93)	/* set device read-only (0 = read-write) */#define BLKROGET   _IO(0x12,94)	/* get read-only status (0 = read_write) */#define BLKRRPART  _IO(0x12,95)	/* re-read partition table */#define BLKGETSIZE _IO(0x12,96)	/* return device size /512 (long *arg) */#define BLKFLSBUF  _IO(0x12,97)	/* flush buffer cache */#define BLKRASET   _IO(0x12,98)	/* set read ahead for block device */#define BLKRAGET   _IO(0x12,99)	/* get current read ahead setting */#define BLKFRASET  _IO(0x12,100)/* set filesystem (mm/filemap.c) read-ahead */#define BLKFRAGET  _IO(0x12,101)/* get filesystem (mm/filemap.c) read-ahead */#define BLKSECTSET _IO(0x12,102)/* set max sectors per request (ll_rw_blk.c) */#define BLKSECTGET _IO(0x12,103)/* get max sectors per request (ll_rw_blk.c) */#define BLKSSZGET  _IO(0x12,104)/* get block device sector size */#if 0#define BLKPG      _IO(0x12,105)/* See blkpg.h */ /* Some people are morons.  Do not use sizeof! */ #define BLKELVGET  _IOR(0x12,106,size_t)/* elevator get */#define BLKELVSET  _IOW(0x12,107,size_t)/* elevator set *//* This was here just to show that the number is taken -   probably all these _IO(0x12,*) ioctls should be moved to blkpg.h. */#endif/* A jump here: 108-111 have been used for various private purposes. */#define BLKBSZGET  _IOR(0x12,112,size_t)#define BLKBSZSET  _IOW(0x12,113,size_t)#define BLKGETSIZE64 _IOR(0x12,114,size_t)	/* return device size in bytes (u64 *arg) */#define BLKTRACESETUP _IOWR(0x12,115,struct blk_user_trace_setup)#define BLKTRACESTART _IO(0x12,116)#define BLKTRACESTOP _IO(0x12,117)#define BLKTRACETEARDOWN _IO(0x12,118)#define BLKDISCARD _IO(0x12,119)#define BLKIOMIN _IO(0x12,120)#define BLKIOOPT _IO(0x12,121)#define BLKALIGNOFF _IO(0x12,122)#define BLKPBSZGET _IO(0x12,123)#define BLKDISCARDZEROES _IO(0x12,124)#define BLKSECDISCARD _IO(0x12,125)#define BLKROTATIONAL _IO(0x12,126)#define BLKZEROOUT _IO(0x12,127)#define BLKGETDISKSEQ _IOR(0x12,128,__u64)/* * A jump here: 130-136 are reserved for zoned block devices * (see uapi/linux/blkzoned.h) */ #define BMAP_IOCTL 1		/* obsolete - kept for compatibility */#define FIBMAP	   _IO(0x00,1)	/* bmap access */#define FIGETBSZ   _IO(0x00,2)	/* get the block size used for bmap */#define FIFREEZE	_IOWR('X', 119, int)	/* Freeze */#define FITHAW		_IOWR('X', 120, int)	/* Thaw */#define FITRIM		_IOWR('X', 121, struct fstrim_range)	/* Trim */#define FICLONE		_IOW(0x94, 9, int)#define FICLONERANGE	_IOW(0x94, 13, struct file_clone_range)#define FIDEDUPERANGE	_IOWR(0x94, 54, struct file_dedupe_range) #define FSLABEL_MAX 256	/* Max chars for the interface; each fs may differ */ #define	FS_IOC_GETFLAGS			_IOR('f', 1, long)#define	FS_IOC_SETFLAGS			_IOW('f', 2, long)#define	FS_IOC_GETVERSION		_IOR('v', 1, long)#define	FS_IOC_SETVERSION		_IOW('v', 2, long)#define FS_IOC_FIEMAP			_IOWR('f', 11, struct fiemap)#define FS_IOC32_GETFLAGS		_IOR('f', 1, int)#define FS_IOC32_SETFLAGS		_IOW('f', 2, int)#define FS_IOC32_GETVERSION		_IOR('v', 1, int)#define FS_IOC32_SETVERSION		_IOW('v', 2, int)#define FS_IOC_FSGETXATTR		_IOR('X', 31, struct fsxattr)#define FS_IOC_FSSETXATTR		_IOW('X', 32, struct fsxattr)#define FS_IOC_GETFSLABEL		_IOR(0x94, 49, char[FSLABEL_MAX])#define FS_IOC_SETFSLABEL		_IOW(0x94, 50, char[FSLABEL_MAX]) /* * Inode flags (FS_IOC_GETFLAGS / FS_IOC_SETFLAGS) * * Note: for historical reasons, these flags were originally used and * defined for use by ext2/ext3, and then other file systems started * using these flags so they wouldn't need to write their own version * of chattr/lsattr (which was shipped as part of e2fsprogs).  You * should think twice before trying to use these flags in new * contexts, or trying to assign these flags, since they are used both * as the UAPI and the on-disk encoding for ext2/3/4.  Also, we are * almost out of 32-bit flags.  :-) * * We have recently hoisted FS_IOC_FSGETXATTR / FS_IOC_FSSETXATTR from * XFS to the generic FS level interface.  This uses a structure that * has padding and hence has more room to grow, so it may be more * appropriate for many new use cases. * * Please do not change these flags or interfaces before checking with * linux-fsdevel@vger.kernel.org and linux-api@vger.kernel.org. */#define	FS_SECRM_FL			0x00000001 /* Secure deletion */#define	FS_UNRM_FL			0x00000002 /* Undelete */#define	FS_COMPR_FL			0x00000004 /* Compress file */#define FS_SYNC_FL			0x00000008 /* Synchronous updates */#define FS_IMMUTABLE_FL			0x00000010 /* Immutable file */#define FS_APPEND_FL			0x00000020 /* writes to file may only append */#define FS_NODUMP_FL			0x00000040 /* do not dump file */#define FS_NOATIME_FL			0x00000080 /* do not update atime *//* Reserved for compression usage... */#define FS_DIRTY_FL			0x00000100#define FS_COMPRBLK_FL			0x00000200 /* One or more compressed clusters */#define FS_NOCOMP_FL			0x00000400 /* Don't compress *//* End compression flags --- maybe not all used */#define FS_ENCRYPT_FL			0x00000800 /* Encrypted file */#define FS_BTREE_FL			0x00001000 /* btree format dir */#define FS_INDEX_FL			0x00001000 /* hash-indexed directory */#define FS_IMAGIC_FL			0x00002000 /* AFS directory */#define FS_JOURNAL_DATA_FL		0x00004000 /* Reserved for ext3 */#define FS_NOTAIL_FL			0x00008000 /* file tail should not be merged */#define FS_DIRSYNC_FL			0x00010000 /* dirsync behaviour (directories only) */#define FS_TOPDIR_FL			0x00020000 /* Top of directory hierarchies*/#define FS_HUGE_FILE_FL			0x00040000 /* Reserved for ext4 */#define FS_EXTENT_FL			0x00080000 /* Extents */#define FS_VERITY_FL			0x00100000 /* Verity protected inode */#define FS_EA_INODE_FL			0x00200000 /* Inode used for large EA */#define FS_EOFBLOCKS_FL			0x00400000 /* Reserved for ext4 */#define FS_NOCOW_FL			0x00800000 /* Do not cow file */#define FS_DAX_FL			0x02000000 /* Inode is DAX */#define FS_INLINE_DATA_FL		0x10000000 /* Reserved for ext4 */#define FS_PROJINHERIT_FL		0x20000000 /* Create with parents projid */#define FS_CASEFOLD_FL			0x40000000 /* Folder is case insensitive */#define FS_RESERVED_FL			0x80000000 /* reserved for ext2 lib */ #define FS_FL_USER_VISIBLE		0x0003DFFF /* User visible flags */#define FS_FL_USER_MODIFIABLE		0x000380FF /* User modifiable flags */  #define SYNC_FILE_RANGE_WAIT_BEFORE	1#define SYNC_FILE_RANGE_WRITE		2#define SYNC_FILE_RANGE_WAIT_AFTER	4#define SYNC_FILE_RANGE_WRITE_AND_WAIT	(SYNC_FILE_RANGE_WRITE | \					 SYNC_FILE_RANGE_WAIT_BEFORE | \					 SYNC_FILE_RANGE_WAIT_AFTER) /* * Flags for preadv2/pwritev2: */ typedef int __bitwise __kernel_rwf_t; /* high priority request, poll if possible */#define RWF_HIPRI	((__force __kernel_rwf_t)0x00000001) /* per-IO O_DSYNC */#define RWF_DSYNC	((__force __kernel_rwf_t)0x00000002) /* per-IO O_SYNC */#define RWF_SYNC	((__force __kernel_rwf_t)0x00000004) /* per-IO, return -EAGAIN if operation would block */#define RWF_NOWAIT	((__force __kernel_rwf_t)0x00000008) /* per-IO O_APPEND */#define RWF_APPEND	((__force __kernel_rwf_t)0x00000010) /* mask of flags supported by the kernel */#define RWF_SUPPORTED	(RWF_HIPRI | RWF_DSYNC | RWF_SYNC | RWF_NOWAIT |\			 RWF_APPEND) #endif /* _UAPI_LINUX_FS_H */