851 lines · 22.4 KB · C
RawDownload
/* * net/tipc/msg.c: TIPC message header routines * * Copyright (c) 2000-2006, 2014-2015, Ericsson AB * Copyright (c) 2005, 2010-2011, Wind River Systems * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. Neither the names of the copyright holders nor the names of its *    contributors may be used to endorse or promote products derived from *    this software without specific prior written permission. * * Alternatively, this software may be distributed under the terms of the * GNU General Public License ("GPL") version 2 as published by the Free * Software Foundation. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #include <net/sock.h>#include "core.h"#include "msg.h"#include "addr.h"#include "name_table.h"#include "crypto.h" #define BUF_ALIGN(x) ALIGN(x, 4)#define MAX_FORWARD_SIZE 1024#ifdef CONFIG_TIPC_CRYPTO#define BUF_HEADROOM ALIGN(((LL_MAX_HEADER + 48) + EHDR_MAX_SIZE), 16)#define BUF_OVERHEAD (BUF_HEADROOM + TIPC_AES_GCM_TAG_SIZE)#else#define BUF_HEADROOM (LL_MAX_HEADER + 48)#define BUF_OVERHEAD BUF_HEADROOM#endif const int one_page_mtu = PAGE_SIZE - SKB_DATA_ALIGN(BUF_OVERHEAD) -			 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); /** * tipc_buf_acquire - creates a TIPC message buffer * @size: message size (including TIPC header) * @gfp: memory allocation flags * * Return: a new buffer with data pointers set to the specified size. * * NOTE: * Headroom is reserved to allow prepending of a data link header. * There may also be unrequested tailroom present at the buffer's end. */struct sk_buff *tipc_buf_acquire(u32 size, gfp_t gfp){	struct sk_buff *skb; 	skb = alloc_skb_fclone(BUF_OVERHEAD + size, gfp);	if (skb) {		skb_reserve(skb, BUF_HEADROOM);		skb_put(skb, size);		skb->next = NULL;	}	return skb;} void tipc_msg_init(u32 own_node, struct tipc_msg *m, u32 user, u32 type,		   u32 hsize, u32 dnode){	memset(m, 0, hsize);	msg_set_version(m);	msg_set_user(m, user);	msg_set_hdr_sz(m, hsize);	msg_set_size(m, hsize);	msg_set_prevnode(m, own_node);	msg_set_type(m, type);	if (hsize > SHORT_H_SIZE) {		msg_set_orignode(m, own_node);		msg_set_destnode(m, dnode);	}} struct sk_buff *tipc_msg_create(uint user, uint type,				uint hdr_sz, uint data_sz, u32 dnode,				u32 onode, u32 dport, u32 oport, int errcode){	struct tipc_msg *msg;	struct sk_buff *buf; 	buf = tipc_buf_acquire(hdr_sz + data_sz, GFP_ATOMIC);	if (unlikely(!buf))		return NULL; 	msg = buf_msg(buf);	tipc_msg_init(onode, msg, user, type, hdr_sz, dnode);	msg_set_size(msg, hdr_sz + data_sz);	msg_set_origport(msg, oport);	msg_set_destport(msg, dport);	msg_set_errcode(msg, errcode);	return buf;} /* tipc_buf_append(): Append a buffer to the fragment list of another buffer * @*headbuf: in:  NULL for first frag, otherwise value returned from prev call *            out: set when successful non-complete reassembly, otherwise NULL * @*buf:     in:  the buffer to append. Always defined *            out: head buf after successful complete reassembly, otherwise NULL * Returns 1 when reassembly complete, otherwise 0 */int tipc_buf_append(struct sk_buff **headbuf, struct sk_buff **buf){	struct sk_buff *head = *headbuf;	struct sk_buff *frag = *buf;	struct sk_buff *tail = NULL;	struct tipc_msg *msg;	u32 fragid;	int delta;	bool headstolen; 	if (!frag)		goto err; 	msg = buf_msg(frag);	fragid = msg_type(msg);	frag->next = NULL;	skb_pull(frag, msg_hdr_sz(msg)); 	if (fragid == FIRST_FRAGMENT) {		if (unlikely(head))			goto err;		*buf = NULL;		if (skb_has_frag_list(frag) && __skb_linearize(frag))			goto err;		frag = skb_unshare(frag, GFP_ATOMIC);		if (unlikely(!frag))			goto err;		head = *headbuf = frag;		TIPC_SKB_CB(head)->tail = NULL;		return 0;	} 	if (!head)		goto err; 	if (skb_try_coalesce(head, frag, &headstolen, &delta)) {		kfree_skb_partial(frag, headstolen);	} else {		tail = TIPC_SKB_CB(head)->tail;		if (!skb_has_frag_list(head))			skb_shinfo(head)->frag_list = frag;		else			tail->next = frag;		head->truesize += frag->truesize;		head->data_len += frag->len;		head->len += frag->len;		TIPC_SKB_CB(head)->tail = frag;	} 	if (fragid == LAST_FRAGMENT) {		TIPC_SKB_CB(head)->validated = 0;		if (unlikely(!tipc_msg_validate(&head)))			goto err;		*buf = head;		TIPC_SKB_CB(head)->tail = NULL;		*headbuf = NULL;		return 1;	}	*buf = NULL;	return 0;err:	kfree_skb(*buf);	kfree_skb(*headbuf);	*buf = *headbuf = NULL;	return 0;} /** * tipc_msg_append(): Append data to tail of an existing buffer queue * @_hdr: header to be used * @m: the data to be appended * @mss: max allowable size of buffer * @dlen: size of data to be appended * @txq: queue to append to * * Return: the number of 1k blocks appended or errno value */int tipc_msg_append(struct tipc_msg *_hdr, struct msghdr *m, int dlen,		    int mss, struct sk_buff_head *txq){	struct sk_buff *skb;	int accounted, total, curr;	int mlen, cpy, rem = dlen;	struct tipc_msg *hdr; 	skb = skb_peek_tail(txq);	accounted = skb ? msg_blocks(buf_msg(skb)) : 0;	total = accounted; 	do {		if (!skb || skb->len >= mss) {			skb = tipc_buf_acquire(mss, GFP_KERNEL);			if (unlikely(!skb))				return -ENOMEM;			skb_orphan(skb);			skb_trim(skb, MIN_H_SIZE);			hdr = buf_msg(skb);			skb_copy_to_linear_data(skb, _hdr, MIN_H_SIZE);			msg_set_hdr_sz(hdr, MIN_H_SIZE);			msg_set_size(hdr, MIN_H_SIZE);			__skb_queue_tail(txq, skb);			total += 1;		}		hdr = buf_msg(skb);		curr = msg_blocks(hdr);		mlen = msg_size(hdr);		cpy = min_t(size_t, rem, mss - mlen);		if (cpy != copy_from_iter(skb->data + mlen, cpy, &m->msg_iter))			return -EFAULT;		msg_set_size(hdr, mlen + cpy);		skb_put(skb, cpy);		rem -= cpy;		total += msg_blocks(hdr) - curr;	} while (rem > 0);	return total - accounted;} /* tipc_msg_validate - validate basic format of received message * * This routine ensures a TIPC message has an acceptable header, and at least * as much data as the header indicates it should.  The routine also ensures * that the entire message header is stored in the main fragment of the message * buffer, to simplify future access to message header fields. * * Note: Having extra info present in the message header or data areas is OK. * TIPC will ignore the excess, under the assumption that it is optional info * introduced by a later release of the protocol. */bool tipc_msg_validate(struct sk_buff **_skb){	struct sk_buff *skb = *_skb;	struct tipc_msg *hdr;	int msz, hsz; 	/* Ensure that flow control ratio condition is satisfied */	if (unlikely(skb->truesize / buf_roundup_len(skb) >= 4)) {		skb = skb_copy_expand(skb, BUF_HEADROOM, 0, GFP_ATOMIC);		if (!skb)			return false;		kfree_skb(*_skb);		*_skb = skb;	} 	if (unlikely(TIPC_SKB_CB(skb)->validated))		return true; 	if (unlikely(!pskb_may_pull(skb, MIN_H_SIZE)))		return false; 	hsz = msg_hdr_sz(buf_msg(skb));	if (unlikely(hsz < MIN_H_SIZE) || (hsz > MAX_H_SIZE))		return false;	if (unlikely(!pskb_may_pull(skb, hsz)))		return false; 	hdr = buf_msg(skb);	if (unlikely(msg_version(hdr) != TIPC_VERSION))		return false; 	msz = msg_size(hdr);	if (unlikely(msz < hsz))		return false;	if (unlikely((msz - hsz) > TIPC_MAX_USER_MSG_SIZE))		return false;	if (unlikely(skb->len < msz))		return false; 	TIPC_SKB_CB(skb)->validated = 1;	return true;} /** * tipc_msg_fragment - build a fragment skb list for TIPC message * * @skb: TIPC message skb * @hdr: internal msg header to be put on the top of the fragments * @pktmax: max size of a fragment incl. the header * @frags: returned fragment skb list * * Return: 0 if the fragmentation is successful, otherwise: -EINVAL * or -ENOMEM */int tipc_msg_fragment(struct sk_buff *skb, const struct tipc_msg *hdr,		      int pktmax, struct sk_buff_head *frags){	int pktno, nof_fragms, dsz, dmax, eat;	struct tipc_msg *_hdr;	struct sk_buff *_skb;	u8 *data; 	/* Non-linear buffer? */	if (skb_linearize(skb))		return -ENOMEM; 	data = (u8 *)skb->data;	dsz = msg_size(buf_msg(skb));	dmax = pktmax - INT_H_SIZE;	if (dsz <= dmax || !dmax)		return -EINVAL; 	nof_fragms = dsz / dmax + 1;	for (pktno = 1; pktno <= nof_fragms; pktno++) {		if (pktno < nof_fragms)			eat = dmax;		else			eat = dsz % dmax;		/* Allocate a new fragment */		_skb = tipc_buf_acquire(INT_H_SIZE + eat, GFP_ATOMIC);		if (!_skb)			goto error;		skb_orphan(_skb);		__skb_queue_tail(frags, _skb);		/* Copy header & data to the fragment */		skb_copy_to_linear_data(_skb, hdr, INT_H_SIZE);		skb_copy_to_linear_data_offset(_skb, INT_H_SIZE, data, eat);		data += eat;		/* Update the fragment's header */		_hdr = buf_msg(_skb);		msg_set_fragm_no(_hdr, pktno);		msg_set_nof_fragms(_hdr, nof_fragms);		msg_set_size(_hdr, INT_H_SIZE + eat);	}	return 0; error:	__skb_queue_purge(frags);	__skb_queue_head_init(frags);	return -ENOMEM;} /** * tipc_msg_build - create buffer chain containing specified header and data * @mhdr: Message header, to be prepended to data * @m: User message * @offset: buffer offset for fragmented messages (FIXME) * @dsz: Total length of user data * @pktmax: Max packet size that can be used * @list: Buffer or chain of buffers to be returned to caller * * Note that the recursive call we are making here is safe, since it can * logically go only one further level down. * * Return: message data size or errno: -ENOMEM, -EFAULT */int tipc_msg_build(struct tipc_msg *mhdr, struct msghdr *m, int offset,		   int dsz, int pktmax, struct sk_buff_head *list){	int mhsz = msg_hdr_sz(mhdr);	struct tipc_msg pkthdr;	int msz = mhsz + dsz;	int pktrem = pktmax;	struct sk_buff *skb;	int drem = dsz;	int pktno = 1;	char *pktpos;	int pktsz;	int rc; 	msg_set_size(mhdr, msz); 	/* No fragmentation needed? */	if (likely(msz <= pktmax)) {		skb = tipc_buf_acquire(msz, GFP_KERNEL); 		/* Fall back to smaller MTU if node local message */		if (unlikely(!skb)) {			if (pktmax != MAX_MSG_SIZE)				return -ENOMEM;			rc = tipc_msg_build(mhdr, m, offset, dsz,					    one_page_mtu, list);			if (rc != dsz)				return rc;			if (tipc_msg_assemble(list))				return dsz;			return -ENOMEM;		}		skb_orphan(skb);		__skb_queue_tail(list, skb);		skb_copy_to_linear_data(skb, mhdr, mhsz);		pktpos = skb->data + mhsz;		if (copy_from_iter_full(pktpos, dsz, &m->msg_iter))			return dsz;		rc = -EFAULT;		goto error;	} 	/* Prepare reusable fragment header */	tipc_msg_init(msg_prevnode(mhdr), &pkthdr, MSG_FRAGMENTER,		      FIRST_FRAGMENT, INT_H_SIZE, msg_destnode(mhdr));	msg_set_size(&pkthdr, pktmax);	msg_set_fragm_no(&pkthdr, pktno);	msg_set_importance(&pkthdr, msg_importance(mhdr)); 	/* Prepare first fragment */	skb = tipc_buf_acquire(pktmax, GFP_KERNEL);	if (!skb)		return -ENOMEM;	skb_orphan(skb);	__skb_queue_tail(list, skb);	pktpos = skb->data;	skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);	pktpos += INT_H_SIZE;	pktrem -= INT_H_SIZE;	skb_copy_to_linear_data_offset(skb, INT_H_SIZE, mhdr, mhsz);	pktpos += mhsz;	pktrem -= mhsz; 	do {		if (drem < pktrem)			pktrem = drem; 		if (!copy_from_iter_full(pktpos, pktrem, &m->msg_iter)) {			rc = -EFAULT;			goto error;		}		drem -= pktrem; 		if (!drem)			break; 		/* Prepare new fragment: */		if (drem < (pktmax - INT_H_SIZE))			pktsz = drem + INT_H_SIZE;		else			pktsz = pktmax;		skb = tipc_buf_acquire(pktsz, GFP_KERNEL);		if (!skb) {			rc = -ENOMEM;			goto error;		}		skb_orphan(skb);		__skb_queue_tail(list, skb);		msg_set_type(&pkthdr, FRAGMENT);		msg_set_size(&pkthdr, pktsz);		msg_set_fragm_no(&pkthdr, ++pktno);		skb_copy_to_linear_data(skb, &pkthdr, INT_H_SIZE);		pktpos = skb->data + INT_H_SIZE;		pktrem = pktsz - INT_H_SIZE; 	} while (1);	msg_set_type(buf_msg(skb), LAST_FRAGMENT);	return dsz;error:	__skb_queue_purge(list);	__skb_queue_head_init(list);	return rc;} /** * tipc_msg_bundle - Append contents of a buffer to tail of an existing one * @bskb: the bundle buffer to append to * @msg: message to be appended * @max: max allowable size for the bundle buffer * * Return: "true" if bundling has been performed, otherwise "false" */static bool tipc_msg_bundle(struct sk_buff *bskb, struct tipc_msg *msg,			    u32 max){	struct tipc_msg *bmsg = buf_msg(bskb);	u32 msz, bsz, offset, pad; 	msz = msg_size(msg);	bsz = msg_size(bmsg);	offset = BUF_ALIGN(bsz);	pad = offset - bsz; 	if (unlikely(skb_tailroom(bskb) < (pad + msz)))		return false;	if (unlikely(max < (offset + msz)))		return false; 	skb_put(bskb, pad + msz);	skb_copy_to_linear_data_offset(bskb, offset, msg, msz);	msg_set_size(bmsg, offset + msz);	msg_set_msgcnt(bmsg, msg_msgcnt(bmsg) + 1);	return true;

Lines 1–500 of 851.