.. _stable_kernel_rules: Everything you ever wanted to know about Linux -stable releases=============================================================== Rules on what kind of patches are accepted, and which ones are not, into the"-stable" tree:  - It or an equivalent fix must already exist in Linus' tree (upstream). - It must be obviously correct and tested. - It cannot be bigger than 100 lines, with context. - It must follow the   :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`   rules. - It must either fix a real bug that bothers people or just add a device ID.   To elaborate on the former:    - It fixes a problem like an oops, a hang, data corruption, a real security     issue, a hardware quirk, a build error (but not for things marked     CONFIG_BROKEN), or some "oh, that's not good" issue.   - Serious issues as reported by a user of a distribution kernel may also     be considered if they fix a notable performance or interactivity issue.     As these fixes are not as obvious and have a higher risk of a subtle     regression they should only be submitted by a distribution kernel     maintainer and include an addendum linking to a bugzilla entry if it     exists and additional information on the user-visible impact.   - No "This could be a problem..." type of things like a "theoretical race     condition", unless an explanation of how the bug can be exploited is also     provided.   - No "trivial" fixes without benefit for users (spelling changes, whitespace     cleanups, etc).  Procedure for submitting patches to the -stable tree---------------------------------------------------- .. note::    Security patches should not be handled (solely) by the -stable review   process but should follow the procedures in   :ref:`Documentation/process/security-bugs.rst <securitybugs>`. There are three options to submit a change to -stable trees:  1. Add a 'stable tag' to the description of a patch you then submit for    mainline inclusion. 2. Ask the stable team to pick up a patch already mainlined. 3. Submit a patch to the stable team that is equivalent to a change already    mainlined. The sections below describe each of the options in more detail. :ref:`option_1` is **strongly** preferred, it is the easiest and most common.:ref:`option_2` is mainly meant for changes where backporting was not consideredat the time of submission. :ref:`option_3` is an alternative to the two earlieroptions for cases where a mainlined patch needs adjustments to apply in olderseries (for example due to API changes). When using option 2 or 3 you can ask for your change to be included in specificstable series. When doing so, ensure the fix or an equivalent is applicable,submitted, or already present in all newer stable trees still supported. This ismeant to prevent regressions that users might later encounter on updating, ife.g. a fix merged for 5.19-rc1 would be backported to 5.10.y, but not to 5.15.y. .. _option_1: Option 1******** To have a patch you submit for mainline inclusion later automatically picked upfor stable trees, add the tag .. code-block:: none      Cc: stable@vger.kernel.org in the sign-off area. Once the patch is mainlined it will be applied to thestable tree without anything else needing to be done by the author orsubsystem maintainer. To sent additional instructions to the stable team, use a shell-style inlinecomment:  * To specify any additional patch prerequisites for cherry picking use the   following format in the sign-off area:    .. code-block:: none      Cc: <stable@vger.kernel.org> # 3.3.x: a1f84a3: sched: Check for idle     Cc: <stable@vger.kernel.org> # 3.3.x: 1b9508f: sched: Rate-limit newidle     Cc: <stable@vger.kernel.org> # 3.3.x: fd21073: sched: Fix affinity logic     Cc: <stable@vger.kernel.org> # 3.3.x     Signed-off-by: Ingo Molnar <mingo@elte.hu>    The tag sequence has the meaning of:    .. code-block:: none      git cherry-pick a1f84a3     git cherry-pick 1b9508f     git cherry-pick fd21073     git cherry-pick <this commit>    Note that for a patch series, you do not have to list as prerequisites the   patches present in the series itself. For example, if you have the following   patch series:    .. code-block:: none      patch1     patch2    where patch2 depends on patch1, you do not have to list patch1 as   prerequisite of patch2 if you have already marked patch1 for stable   inclusion.  * For patches that may have kernel version prerequisites specify them using   the following format in the sign-off area:    .. code-block:: none      Cc: <stable@vger.kernel.org> # 3.3.x    The tag has the meaning of:    .. code-block:: none      git cherry-pick <this commit>    For each "-stable" tree starting with the specified version.    Note, such tagging is unnecessary if the stable team can derive the   appropriate versions from Fixes: tags.  * To delay pick up of patches, use the following format:    .. code-block:: none      Cc: <stable@vger.kernel.org> # after 4 weeks in mainline  * For any other requests, just add a note to the stable tag. This for example   can be used to point out known problems:    .. code-block:: none      Cc: <stable@vger.kernel.org> # see patch description, needs adjustments for <= 6.3 .. _option_2: Option 2******** If the patch already has been merged to mainline, send an email tostable@vger.kernel.org containing the subject of the patch, the commit ID,why you think it should be applied, and what kernel versions you wish it tobe applied to. .. _option_3: Option 3******** Send the patch, after verifying that it follows the above rules, tostable@vger.kernel.org and mention the kernel versions you wish it to be appliedto. When doing so, you must note the upstream commit ID in the changelog of yoursubmission with a separate line above the commit text, like this: .. code-block:: none     commit <sha1> upstream. or alternatively: .. code-block:: none     [ Upstream commit <sha1> ] If the submitted patch deviates from the original upstream patch (for examplebecause it had to be adjusted for the older API), this must be very clearlydocumented and justified in the patch description.  Following the submission------------------------ The sender will receive an ACK when the patch has been accepted into thequeue, or a NAK if the patch is rejected.  This response might take a fewdays, according to the schedules of the stable team members. If accepted, the patch will be added to the -stable queue, for review by otherdevelopers and by the relevant subsystem maintainer.  Review cycle------------  - When the -stable maintainers decide for a review cycle, the patches will be   sent to the review committee, and the maintainer of the affected area of   the patch (unless the submitter is the maintainer of the area) and CC: to   the linux-kernel mailing list. - The review committee has 48 hours in which to ACK or NAK the patch. - If the patch is rejected by a member of the committee, or linux-kernel   members object to the patch, bringing up issues that the maintainers and   members did not realize, the patch will be dropped from the queue. - The ACKed patches will be posted again as part of release candidate (-rc)   to be tested by developers and testers. - Usually only one -rc release is made, however if there are any outstanding   issues, some patches may be modified or dropped or additional patches may   be queued. Additional -rc releases are then released and tested until no   issues are found. - Responding to the -rc releases can be done on the mailing list by sending   a "Tested-by:" email with any testing information desired. The "Tested-by:"   tags will be collected and added to the release commit. - At the end of the review cycle, the new -stable release will be released   containing all the queued and tested patches. - Security patches will be accepted into the -stable tree directly from the   security kernel team, and not go through the normal review cycle.   Contact the kernel security team for more details on this procedure.  Trees-----  - The queues of patches, for both completed versions and in progress   versions can be found at: 	https://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git  - The finalized and tagged releases of all stable kernels can be found   in separate branches per version at: 	https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git  - The release candidate of all stable kernel versions can be found at:         https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git/    .. warning::      The -stable-rc tree is a snapshot in time of the stable-queue tree and      will change frequently, hence will be rebased often. It should only be      used for testing purposes (e.g. to be consumed by CI systems).  Review committee----------------  - This is made up of a number of kernel developers who have volunteered for   this task, and a few that haven't.