# SPDX-License-Identifier: GPL-2.0## Makefile for the Linux kernel device drivers.## 15 Sep 2000, Christoph Hellwig <hch@infradead.org># Rewritten to use lists instead of if-statements.# # Some driver Makefiles miss $(srctree)/ for include directive.ifdef building_out_of_srctreeMAKEFLAGS += --include-dir=$(srctree)endif obj-y				+= cache/obj-y				+= irqchip/obj-y				+= bus/ obj-$(CONFIG_GENERIC_PHY)	+= phy/ # GPIO must come after pinctrl as gpios may need to mux pins etcobj-$(CONFIG_PINCTRL)		+= pinctrl/obj-$(CONFIG_GPIOLIB)		+= gpio/obj-y				+= pwm/ obj-y				+= pci/ obj-$(CONFIG_PARISC)		+= parisc/obj-$(CONFIG_RAPIDIO)		+= rapidio/obj-y				+= video/obj-y				+= idle/ # IPMI must come before ACPI in order to provide IPMI opregion supportobj-y				+= char/ipmi/ obj-$(CONFIG_ACPI)		+= acpi/ # PnP must come after ACPI since it will eventually need to check if acpi# was used and do nothing if soobj-$(CONFIG_PNP)		+= pnp/obj-y				+= amba/ obj-y				+= clk/# Many drivers will want to use DMA so this has to be made available# really early.obj-$(CONFIG_DMADEVICES)	+= dma/ # SOC specific infrastructure drivers.obj-y				+= soc/obj-$(CONFIG_PM_GENERIC_DOMAINS)	+= pmdomain/ obj-y				+= virtio/obj-$(CONFIG_VDPA)		+= vdpa/obj-$(CONFIG_XEN)		+= xen/ # regulators early, since some subsystems rely on them to initializeobj-$(CONFIG_REGULATOR)		+= regulator/ # reset controllers early, since gpu drivers might rely on them to initializeobj-$(CONFIG_RESET_CONTROLLER)	+= reset/ # tty/ comes before char/ so that the VT console is the boot-time# default.obj-y				+= tty/obj-y				+= char/ # iommu/ comes before gpu as gpu are using iommu controllersobj-y				+= iommu/ # gpu/ comes after char for AGP vs DRM startup and after iommuobj-y				+= gpu/ obj-$(CONFIG_CONNECTOR)		+= connector/ # i810fb and intelfb depend on char/agp/obj-$(CONFIG_FB_I810)           += video/fbdev/i810/obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/ obj-$(CONFIG_PARPORT)		+= parport/obj-y				+= base/ block/ misc/ mfd/ nfc/obj-$(CONFIG_LIBNVDIMM)		+= nvdimm/obj-y				+= dax/obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/obj-$(CONFIG_NUBUS)		+= nubus/obj-y				+= cxl/obj-y				+= macintosh/obj-y				+= scsi/obj-y				+= nvme/obj-$(CONFIG_ATA)		+= ata/obj-$(CONFIG_TARGET_CORE)	+= target/obj-$(CONFIG_MTD)		+= mtd/obj-$(CONFIG_SPI)		+= spi/obj-$(CONFIG_SPMI)		+= spmi/obj-$(CONFIG_HSI)		+= hsi/obj-$(CONFIG_SLIMBUS)		+= slimbus/obj-y				+= net/obj-$(CONFIG_ATM)		+= atm/obj-$(CONFIG_FUSION)		+= message/obj-y				+= firewire/obj-$(CONFIG_UIO)		+= uio/obj-$(CONFIG_VFIO)		+= vfio/obj-y				+= cdrom/obj-y				+= auxdisplay/obj-$(CONFIG_PCCARD)		+= pcmcia/obj-$(CONFIG_DIO)		+= dio/obj-$(CONFIG_SBUS)		+= sbus/obj-$(CONFIG_ZORRO)		+= zorro/obj-$(CONFIG_ATA_OVER_ETH)	+= block/aoe/obj-$(CONFIG_TC)		+= tc/obj-$(CONFIG_USB_PHY)		+= usb/obj-$(CONFIG_USB)		+= usb/obj-$(CONFIG_USB_SUPPORT)	+= usb/obj-$(CONFIG_PCI)		+= usb/obj-$(CONFIG_USB_GADGET)	+= usb/obj-$(CONFIG_OF)		+= usb/obj-$(CONFIG_SERIO)		+= input/serio/obj-$(CONFIG_GAMEPORT)		+= input/gameport/obj-$(CONFIG_INPUT)		+= input/obj-$(CONFIG_RTC_LIB)		+= rtc/obj-y				+= i2c/ i3c/ media/obj-$(CONFIG_PPS)		+= pps/obj-y				+= ptp/obj-$(CONFIG_W1)		+= w1/obj-y				+= power/obj-$(CONFIG_HWMON)		+= hwmon/obj-$(CONFIG_THERMAL)		+= thermal/obj-$(CONFIG_WATCHDOG)		+= watchdog/obj-$(CONFIG_MD)		+= md/obj-$(CONFIG_BT)		+= bluetooth/obj-$(CONFIG_ACCESSIBILITY)	+= accessibility/obj-$(CONFIG_ISDN)		+= isdn/obj-$(CONFIG_EDAC)		+= edac/obj-$(CONFIG_EISA)		+= eisa/obj-$(CONFIG_PM_OPP)		+= opp/obj-$(CONFIG_CPU_FREQ)		+= cpufreq/obj-$(CONFIG_CPU_IDLE)		+= cpuidle/obj-y				+= mmc/obj-y				+= ufs/obj-$(CONFIG_MEMSTICK)		+= memstick/obj-$(CONFIG_NEW_LEDS)		+= leds/obj-$(CONFIG_INFINIBAND)	+= infiniband/obj-y				+= firmware/obj-$(CONFIG_CRYPTO)		+= crypto/obj-$(CONFIG_SUPERH)		+= sh/obj-y				+= clocksource/obj-$(CONFIG_DCA)		+= dca/obj-$(CONFIG_HID_SUPPORT)	+= hid/obj-$(CONFIG_PPC_PS3)		+= ps3/obj-$(CONFIG_OF)		+= of/obj-$(CONFIG_SSB)		+= ssb/obj-$(CONFIG_BCMA)		+= bcma/obj-$(CONFIG_VHOST_RING)	+= vhost/obj-$(CONFIG_VHOST_IOTLB)	+= vhost/obj-$(CONFIG_VHOST)		+= vhost/obj-$(CONFIG_GREYBUS)		+= greybus/obj-$(CONFIG_COMEDI)		+= comedi/obj-$(CONFIG_STAGING)		+= staging/obj-y				+= platform/ obj-$(CONFIG_MAILBOX)		+= mailbox/obj-$(CONFIG_HWSPINLOCK)	+= hwspinlock/obj-$(CONFIG_REMOTEPROC)	+= remoteproc/obj-$(CONFIG_RPMSG)		+= rpmsg/obj-$(CONFIG_SOUNDWIRE)		+= soundwire/ # Virtualization driversobj-$(CONFIG_VIRT_DRIVERS)	+= virt/obj-$(subst m,y,$(CONFIG_HYPERV))	+= hv/ obj-$(CONFIG_PM_DEVFREQ)	+= devfreq/obj-$(CONFIG_EXTCON)		+= extcon/obj-$(CONFIG_MEMORY)		+= memory/obj-$(CONFIG_IIO)		+= iio/obj-$(CONFIG_IPACK_BUS)		+= ipack/obj-$(CONFIG_NTB)		+= ntb/obj-$(CONFIG_POWERCAP)		+= powercap/obj-$(CONFIG_MCB)		+= mcb/obj-$(CONFIG_PERF_EVENTS)	+= perf/obj-$(CONFIG_RAS)		+= ras/obj-$(CONFIG_USB4)		+= thunderbolt/obj-$(CONFIG_CORESIGHT)		+= hwtracing/coresight/obj-y				+= hwtracing/intel_th/obj-$(CONFIG_STM)		+= hwtracing/stm/obj-$(CONFIG_HISI_PTT)		+= hwtracing/ptt/obj-y				+= android/obj-$(CONFIG_NVMEM)		+= nvmem/obj-$(CONFIG_FPGA)		+= fpga/obj-$(CONFIG_FSI)		+= fsi/obj-$(CONFIG_TEE)		+= tee/obj-$(CONFIG_MULTIPLEXER)	+= mux/obj-$(CONFIG_SIOX)		+= siox/obj-$(CONFIG_GNSS)		+= gnss/obj-$(CONFIG_INTERCONNECT)	+= interconnect/obj-$(CONFIG_COUNTER)		+= counter/obj-$(CONFIG_MOST)		+= most/obj-$(CONFIG_PECI)		+= peci/obj-$(CONFIG_HTE)		+= hte/obj-$(CONFIG_DRM_ACCEL)		+= accel/obj-$(CONFIG_CDX_BUS)		+= cdx/obj-$(CONFIG_DPLL)		+= dpll/ obj-$(CONFIG_S390)		+= s390/