| @@ -0,0 +1,482 @@ |
| 1 | +/* Copyright (c) 2010 Christoph Mair <christoph.mair@gmail.com> |
| 2 | + |
| 3 | + This driver supports the bmp085 digital barometric pressure |
| 4 | + and temperature sensor from Bosch Sensortec. The datasheet |
| 5 | + is avaliable from their website: |
| 6 | + http://www.bosch-sensortec.com/content/language1/downloads/BST-BMP085-DS000-05.pdf |
| 7 | + |
| 8 | + A pressure measurement is issued by reading from pressure0_input. |
| 9 | + The return value ranges from 30000 to 110000 pascal with a resulution |
| 10 | + of 1 pascal (0.01 millibar) which enables measurements from 9000m above |
| 11 | + to 500m below sea level. |
| 12 | + |
| 13 | + The temperature can be read from temp0_input. Values range from |
| 14 | + -400 to 850 representing the ambient temperature in degree celsius |
| 15 | + multiplied by 10.The resolution is 0.1 celsius. |
| 16 | + |
| 17 | + Because ambient pressure is temperature dependent, a temperature |
| 18 | + measurement will be executed automatically even if the user is reading |
| 19 | + from pressure0_input. This happens if the last temperature measurement |
| 20 | + has been executed more then one second ago. |
| 21 | + |
| 22 | + To decrease RMS noise from pressure measurements, the bmp085 can |
| 23 | + autonomously calculate the average of up to eight samples. This is |
| 24 | + set up by writing to the oversampling sysfs file. Accepted values |
| 25 | + are 0, 1, 2 and 3. 2^x when x is the value written to this file |
| 26 | + specifies the number of samples used to calculate the ambient pressure. |
| 27 | + RMS noise is specified with six pascal (without averaging) and decreases |
| 28 | + down to 3 pascal when using an oversampling setting of 3. |
| 29 | + |
| 30 | + This program is free software; you can redistribute it and/or modify |
| 31 | + it under the terms of the GNU General Public License as published by |
| 32 | + the Free Software Foundation; either version 2 of the License, or |
| 33 | + (at your option) any later version. |
| 34 | + |
| 35 | + This program is distributed in the hope that it will be useful, |
| 36 | + but WITHOUT ANY WARRANTY; without even the implied warranty of |
| 37 | + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| 38 | + GNU General Public License for more details. |
| 39 | + |
| 40 | + You should have received a copy of the GNU General Public License |
| 41 | + along with this program; if not, write to the Free Software |
| 42 | + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| 43 | +*/ |
| 44 | + |
| 45 | + |
| 46 | +#include <linux/module.h> |
| 47 | +#include <linux/init.h> |
| 48 | +#include <linux/i2c.h> |
| 49 | +#include <linux/slab.h> |
| 50 | +#include <linux/delay.h> |
| 51 | + |
| 52 | + |
| 53 | +#define BMP085_I2C_ADDRESS 0x77 |
| 54 | +#define BMP085_CHIP_ID 0x55 |
| 55 | + |
| 56 | +#define BMP085_CALIBRATION_DATA_START 0xAA |
| 57 | +#define BMP085_CALIBRATION_DATA_LENGTH 11 /* 16 bit values */ |
| 58 | +#define BMP085_CHIP_ID_REG 0xD0 |
| 59 | +#define BMP085_VERSION_REG 0xD1 |
| 60 | +#define BMP085_CTRL_REG 0xF4 |
| 61 | +#define BMP085_TEMP_MEASUREMENT 0x2E |
| 62 | +#define BMP085_PRESSURE_MEASUREMENT 0x34 |
| 63 | +#define BMP085_CONVERSION_REGISTER_MSB 0xF6 |
| 64 | +#define BMP085_CONVERSION_REGISTER_LSB 0xF7 |
| 65 | +#define BMP085_CONVERSION_REGISTER_XLSB 0xF8 |
| 66 | +#define BMP085_TEMP_CONVERSION_TIME 5 |
| 67 | + |
| 68 | +#define BMP085_CLIENT_NAME "bmp085" |
| 69 | + |
| 70 | + |
| 71 | +static const unsigned short normal_i2c[] = { BMP085_I2C_ADDRESS, |
| 72 | + I2C_CLIENT_END }; |
| 73 | + |
| 74 | +struct bmp085_calibration_data { |
| 75 | + s16 AC1, AC2, AC3; |
| 76 | + u16 AC4, AC5, AC6; |
| 77 | + s16 B1, B2; |
| 78 | + s16 MB, MC, MD; |
| 79 | +}; |
| 80 | + |
| 81 | + |
| 82 | +/* Each client has this additional data */ |
| 83 | +struct bmp085_data { |
| 84 | + struct i2c_client *client; |
| 85 | + struct mutex lock; |
| 86 | + struct bmp085_calibration_data calibration; |
| 87 | + u32 raw_temperature; |
| 88 | + u32 raw_pressure; |
| 89 | + unsigned char oversampling_setting; |
| 90 | + u32 last_temp_measurement; |
| 91 | + s32 b6; /* calculated temperature correction coefficient */ |
| 92 | +}; |
| 93 | + |
| 94 | + |
| 95 | +static s32 bmp085_read_calibration_data(struct i2c_client *client) |
| 96 | +{ |
| 97 | + u16 tmp[BMP085_CALIBRATION_DATA_LENGTH]; |
| 98 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 99 | + struct bmp085_calibration_data *cali = &(data->calibration); |
| 100 | + s32 status = i2c_smbus_read_i2c_block_data(client, |
| 101 | + BMP085_CALIBRATION_DATA_START, |
| 102 | + BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16), |
| 103 | + (u8 *)tmp); |
| 104 | + if (status < 0) |
| 105 | + return status; |
| 106 | + |
| 107 | + if (status != BMP085_CALIBRATION_DATA_LENGTH*sizeof(u16)) |
| 108 | + return -EIO; |
| 109 | + |
| 110 | + cali->AC1 = be16_to_cpu(tmp[0]); |
| 111 | + cali->AC2 = be16_to_cpu(tmp[1]); |
| 112 | + cali->AC3 = be16_to_cpu(tmp[2]); |
| 113 | + cali->AC4 = be16_to_cpu(tmp[3]); |
| 114 | + cali->AC5 = be16_to_cpu(tmp[4]); |
| 115 | + cali->AC6 = be16_to_cpu(tmp[5]); |
| 116 | + cali->B1 = be16_to_cpu(tmp[6]); |
| 117 | + cali->B2 = be16_to_cpu(tmp[7]); |
| 118 | + cali->MB = be16_to_cpu(tmp[8]); |
| 119 | + cali->MC = be16_to_cpu(tmp[9]); |
| 120 | + cali->MD = be16_to_cpu(tmp[10]); |
| 121 | + return 0; |
| 122 | +} |
| 123 | + |
| 124 | + |
| 125 | +static s32 bmp085_update_raw_temperature(struct bmp085_data *data) |
| 126 | +{ |
| 127 | + u16 tmp; |
| 128 | + s32 status; |
| 129 | + |
| 130 | + mutex_lock(&data->lock); |
| 131 | + status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, |
| 132 | + BMP085_TEMP_MEASUREMENT); |
| 133 | + if (status != 0) { |
| 134 | + dev_err(&data->client->dev, |
| 135 | + "Error while requesting temperature measurement.\n"); |
| 136 | + goto exit; |
| 137 | + } |
| 138 | + msleep(BMP085_TEMP_CONVERSION_TIME); |
| 139 | + |
| 140 | + status = i2c_smbus_read_i2c_block_data(data->client, |
| 141 | + BMP085_CONVERSION_REGISTER_MSB, sizeof(tmp), (u8 *)&tmp); |
| 142 | + if (status < 0) |
| 143 | + goto exit; |
| 144 | + if (status != sizeof(tmp)) { |
| 145 | + dev_err(&data->client->dev, |
| 146 | + "Error while reading temperature measurement result\n"); |
| 147 | + status = -EIO; |
| 148 | + goto exit; |
| 149 | + } |
| 150 | + data->raw_temperature = be16_to_cpu(tmp); |
| 151 | + data->last_temp_measurement = jiffies; |
| 152 | + status = 0; /* everything ok, return 0 */ |
| 153 | + |
| 154 | +exit: |
| 155 | + mutex_unlock(&data->lock); |
| 156 | + return status; |
| 157 | +} |
| 158 | + |
| 159 | +static s32 bmp085_update_raw_pressure(struct bmp085_data *data) |
| 160 | +{ |
| 161 | + u32 tmp = 0; |
| 162 | + s32 status; |
| 163 | + |
| 164 | + mutex_lock(&data->lock); |
| 165 | + status = i2c_smbus_write_byte_data(data->client, BMP085_CTRL_REG, |
| 166 | + BMP085_PRESSURE_MEASUREMENT + (data->oversampling_setting<<6)); |
| 167 | + if (status != 0) { |
| 168 | + dev_err(&data->client->dev, |
| 169 | + "Error while requesting pressure measurement.\n"); |
| 170 | + goto exit; |
| 171 | + } |
| 172 | + |
| 173 | + /* wait for the end of conversion */ |
| 174 | + msleep(2+(3 << data->oversampling_setting)); |
| 175 | + |
| 176 | + /* copy data into a u32 (4 bytes), but skip the first byte. */ |
| 177 | + status = i2c_smbus_read_i2c_block_data(data->client, |
| 178 | + BMP085_CONVERSION_REGISTER_MSB, 3, ((u8 *)&tmp)+1); |
| 179 | + if (status < 0) |
| 180 | + goto exit; |
| 181 | + if (status != 3) { |
| 182 | + dev_err(&data->client->dev, |
| 183 | + "Error while reading pressure measurement results\n"); |
| 184 | + status = -EIO; |
| 185 | + goto exit; |
| 186 | + } |
| 187 | + data->raw_pressure = be32_to_cpu((tmp)); |
| 188 | + data->raw_pressure >>= (8-data->oversampling_setting); |
| 189 | + status = 0; /* everything ok, return 0 */ |
| 190 | + |
| 191 | +exit: |
| 192 | + mutex_unlock(&data->lock); |
| 193 | + return status; |
| 194 | +} |
| 195 | + |
| 196 | + |
| 197 | +/* |
| 198 | + * This function starts the temperature measurement and returns the value |
| 199 | + * in tenth of a degree celsius. |
| 200 | + */ |
| 201 | +static s32 bmp085_get_temperature(struct bmp085_data *data, int *temperature) |
| 202 | +{ |
| 203 | + struct bmp085_calibration_data *cali = &data->calibration; |
| 204 | + long x1, x2; |
| 205 | + int status; |
| 206 | + |
| 207 | + status = bmp085_update_raw_temperature(data); |
| 208 | + if (status != 0) |
| 209 | + goto exit; |
| 210 | + |
| 211 | + x1 = ((data->raw_temperature - cali->AC6) * cali->AC5) >> 15; |
| 212 | + x2 = (cali->MC << 11) / (x1 + cali->MD); |
| 213 | + data->b6 = x1 + x2 - 4000; |
| 214 | + /* if NULL just update b6. Used for pressure only measurements */ |
| 215 | + if (temperature != NULL) |
| 216 | + *temperature = (x1+x2+8) >> 4; |
| 217 | + |
| 218 | +exit: |
| 219 | + return status;; |
| 220 | +} |
| 221 | + |
| 222 | +/* |
| 223 | + * This function starts the pressure measurement and returns the value |
| 224 | + * in millibar. Since the pressure depends on the ambient temperature, |
| 225 | + * a temperature measurement is executed if the last known value is older |
| 226 | + * than one second. |
| 227 | + */ |
| 228 | +static s32 bmp085_get_pressure(struct bmp085_data *data, int *pressure) |
| 229 | +{ |
| 230 | + struct bmp085_calibration_data *cali = &data->calibration; |
| 231 | + s32 x1, x2, x3, b3; |
| 232 | + u32 b4, b7; |
| 233 | + s32 p; |
| 234 | + int status; |
| 235 | + |
| 236 | + /* alt least every second force an update of the ambient temperature */ |
| 237 | + if (data->last_temp_measurement + 1*HZ < jiffies) { |
| 238 | + status = bmp085_get_temperature(data, NULL); |
| 239 | + if (status != 0) |
| 240 | + goto exit; |
| 241 | + } |
| 242 | + |
| 243 | + status = bmp085_update_raw_pressure(data); |
| 244 | + if (status != 0) |
| 245 | + goto exit; |
| 246 | + |
| 247 | + x1 = (data->b6 * data->b6) >> 12; |
| 248 | + x1 *= cali->B2; |
| 249 | + x1 >>= 11; |
| 250 | + |
| 251 | + x2 = cali->AC2 * data->b6; |
| 252 | + x2 >>= 11; |
| 253 | + |
| 254 | + x3 = x1 + x2; |
| 255 | + |
| 256 | + b3 = (((((s32)cali->AC1) * 4 + x3) << data->oversampling_setting) + 2); |
| 257 | + b3 >>= 2; |
| 258 | + |
| 259 | + x1 = (cali->AC3 * data->b6) >> 13; |
| 260 | + x2 = (cali->B1 * ((data->b6 * data->b6) >> 12)) >> 16; |
| 261 | + x3 = (x1 + x2 + 2) >> 2; |
| 262 | + b4 = (cali->AC4 * (u32)(x3 + 32768)) >> 15; |
| 263 | + |
| 264 | + b7 = ((u32)data->raw_pressure - b3) * |
| 265 | + (50000 >> data->oversampling_setting); |
| 266 | + p = ((b7 < 0x80000000) ? ((b7 << 1) / b4) : ((b7 / b4) * 2)); |
| 267 | + |
| 268 | + x1 = p >> 8; |
| 269 | + x1 *= x1; |
| 270 | + x1 = (x1 * 3038) >> 16; |
| 271 | + x2 = (-7357 * p) >> 16; |
| 272 | + p += (x1 + x2 + 3791) >> 4; |
| 273 | + |
| 274 | + *pressure = p; |
| 275 | + |
| 276 | +exit: |
| 277 | + return status; |
| 278 | +} |
| 279 | + |
| 280 | +/* |
| 281 | + * This function sets the chip-internal oversampling. Valid values are 0..3. |
| 282 | + * The chip will use 2^oversampling samples for internal averaging. |
| 283 | + * This influences the measurement time and the accuracy; larger values |
| 284 | + * increase both. The datasheet gives on overview on how measurement time, |
| 285 | + * accuracy and noise correlate. |
| 286 | + */ |
| 287 | +static void bmp085_set_oversampling(struct bmp085_data *data, |
| 288 | + unsigned char oversampling) |
| 289 | +{ |
| 290 | + if (oversampling > 3) |
| 291 | + oversampling = 3; |
| 292 | + data->oversampling_setting = oversampling; |
| 293 | +} |
| 294 | + |
| 295 | +/* |
| 296 | + * Returns the currently selected oversampling. Range: 0..3 |
| 297 | + */ |
| 298 | +static unsigned char bmp085_get_oversampling(struct bmp085_data *data) |
| 299 | +{ |
| 300 | + return data->oversampling_setting; |
| 301 | +} |
| 302 | + |
| 303 | +/* sysfs callbacks */ |
| 304 | +static ssize_t set_oversampling(struct device *dev, |
| 305 | + struct device_attribute *attr, |
| 306 | + const char *buf, size_t count) |
| 307 | +{ |
| 308 | + struct i2c_client *client = to_i2c_client(dev); |
| 309 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 310 | + unsigned long oversampling; |
| 311 | + int success = strict_strtoul(buf, 10, &oversampling); |
| 312 | + if (success == 0) { |
| 313 | + bmp085_set_oversampling(data, oversampling); |
| 314 | + return count; |
| 315 | + } |
| 316 | + return success; |
| 317 | +} |
| 318 | + |
| 319 | +static ssize_t show_oversampling(struct device *dev, |
| 320 | + struct device_attribute *attr, char *buf) |
| 321 | +{ |
| 322 | + struct i2c_client *client = to_i2c_client(dev); |
| 323 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 324 | + return sprintf(buf, "%u\n", bmp085_get_oversampling(data)); |
| 325 | +} |
| 326 | +static DEVICE_ATTR(oversampling, S_IWUSR | S_IRUGO, |
| 327 | + show_oversampling, set_oversampling); |
| 328 | + |
| 329 | + |
| 330 | +static ssize_t show_temperature(struct device *dev, |
| 331 | + struct device_attribute *attr, char *buf) |
| 332 | +{ |
| 333 | + int temperature; |
| 334 | + int status; |
| 335 | + struct i2c_client *client = to_i2c_client(dev); |
| 336 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 337 | + |
| 338 | + status = bmp085_get_temperature(data, &temperature); |
| 339 | + if (status != 0) |
| 340 | + return status; |
| 341 | + else |
| 342 | + return sprintf(buf, "%d\n", temperature); |
| 343 | +} |
| 344 | +static DEVICE_ATTR(temp0_input, S_IRUGO, show_temperature, NULL); |
| 345 | + |
| 346 | + |
| 347 | +static ssize_t show_pressure(struct device *dev, |
| 348 | + struct device_attribute *attr, char *buf) |
| 349 | +{ |
| 350 | + int pressure; |
| 351 | + int status; |
| 352 | + struct i2c_client *client = to_i2c_client(dev); |
| 353 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 354 | + |
| 355 | + status = bmp085_get_pressure(data, &pressure); |
| 356 | + if (status != 0) |
| 357 | + return status; |
| 358 | + else |
| 359 | + return sprintf(buf, "%d\n", pressure); |
| 360 | +} |
| 361 | +static DEVICE_ATTR(pressure0_input, S_IRUGO, show_pressure, NULL); |
| 362 | + |
| 363 | + |
| 364 | +static struct attribute *bmp085_attributes[] = { |
| 365 | + &dev_attr_temp0_input.attr, |
| 366 | + &dev_attr_pressure0_input.attr, |
| 367 | + &dev_attr_oversampling.attr, |
| 368 | + NULL |
| 369 | +}; |
| 370 | + |
| 371 | +static const struct attribute_group bmp085_attr_group = { |
| 372 | + .attrs = bmp085_attributes, |
| 373 | +}; |
| 374 | + |
| 375 | +static int bmp085_detect(struct i2c_client *client, struct i2c_board_info *info) |
| 376 | +{ |
| 377 | + if (client->addr != BMP085_I2C_ADDRESS) |
| 378 | + return -ENODEV; |
| 379 | + |
| 380 | + if (i2c_smbus_read_byte_data(client, BMP085_CHIP_ID_REG) != BMP085_CHIP_ID) |
| 381 | + return -ENODEV; |
| 382 | + |
| 383 | + return 0; |
| 384 | +} |
| 385 | + |
| 386 | +static int bmp085_init_client(struct i2c_client *client) |
| 387 | +{ |
| 388 | + unsigned char version; |
| 389 | + int status; |
| 390 | + struct bmp085_data *data = i2c_get_clientdata(client); |
| 391 | + data->client = client; |
| 392 | + status = bmp085_read_calibration_data(client); |
| 393 | + if (status != 0) |
| 394 | + goto exit; |
| 395 | + version = i2c_smbus_read_byte_data(client, BMP085_VERSION_REG); |
| 396 | + data->last_temp_measurement = 0; |
| 397 | + data->oversampling_setting = 3; |
| 398 | + mutex_init(&data->lock); |
| 399 | + dev_info(&data->client->dev, "BMP085 ver. %d.%d found.\n", |
| 400 | + (version & 0x0F), (version & 0xF0) >> 4); |
| 401 | +exit: |
| 402 | + return status; |
| 403 | +} |
| 404 | + |
| 405 | +static int bmp085_probe(struct i2c_client *client, |
| 406 | + const struct i2c_device_id *id) |
| 407 | +{ |
| 408 | + struct bmp085_data *data; |
| 409 | + int err = 0; |
| 410 | + |
| 411 | + data = kzalloc(sizeof(struct bmp085_data), GFP_KERNEL); |
| 412 | + if (!data) { |
| 413 | + err = -ENOMEM; |
| 414 | + goto exit; |
| 415 | + } |
| 416 | + |
| 417 | + /* default settings after POR */ |
| 418 | + data->oversampling_setting = 0x00; |
| 419 | + |
| 420 | + i2c_set_clientdata(client, data); |
| 421 | + |
| 422 | + /* Initialize the BMP085 chip */ |
| 423 | + err = bmp085_init_client(client); |
| 424 | + if (err != 0) |
| 425 | + goto exit_free; |
| 426 | + |
| 427 | + /* Register sysfs hooks */ |
| 428 | + err = sysfs_create_group(&client->dev.kobj, &bmp085_attr_group); |
| 429 | + if (err) |
| 430 | + goto exit_free; |
| 431 | + |
| 432 | + dev_info(&data->client->dev, "Succesfully initialized bmp085!\n"); |
| 433 | + goto exit; |
| 434 | + |
| 435 | +exit_free: |
| 436 | + kfree(data); |
| 437 | +exit: |
| 438 | + return err; |
| 439 | +} |
| 440 | + |
| 441 | +static int bmp085_remove(struct i2c_client *client) |
| 442 | +{ |
| 443 | + sysfs_remove_group(&client->dev.kobj, &bmp085_attr_group); |
| 444 | + kfree(i2c_get_clientdata(client)); |
| 445 | + return 0; |
| 446 | +} |
| 447 | + |
| 448 | +static const struct i2c_device_id bmp085_id[] = { |
| 449 | + { "bmp085", 0 }, |
| 450 | + { } |
| 451 | +}; |
| 452 | + |
| 453 | +static struct i2c_driver bmp085_driver = { |
| 454 | + .driver = { |
| 455 | + .owner = THIS_MODULE, |
| 456 | + .name = "bmp085" |
| 457 | + }, |
| 458 | + .id_table = bmp085_id, |
| 459 | + .probe = bmp085_probe, |
| 460 | + .remove = bmp085_remove, |
| 461 | + |
| 462 | + .detect = bmp085_detect, |
| 463 | + .address_list = normal_i2c |
| 464 | +}; |
| 465 | + |
| 466 | +static int __init bmp085_init(void) |
| 467 | +{ |
| 468 | + return i2c_add_driver(&bmp085_driver); |
| 469 | +} |
| 470 | + |
| 471 | +static void __exit bmp085_exit(void) |
| 472 | +{ |
| 473 | + i2c_del_driver(&bmp085_driver); |
| 474 | +} |
| 475 | + |
| 476 | + |
| 477 | +MODULE_AUTHOR("Christoph Mair <christoph.mair@gmail.com"); |
| 478 | +MODULE_DESCRIPTION("BMP085 driver"); |
| 479 | +MODULE_LICENSE("GPL"); |
| 480 | + |
| 481 | +module_init(bmp085_init); |
| 482 | +module_exit(bmp085_exit); |