History

Merge tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann: "This is a rather large update for the ARM devicetree files, after a few quieter releases, with 775 total commits and 47 branches pulled into this one. There are 5 new SoC types plus some minor variations, and a total of 60 new machines, so I'm limiting the summary to the main noteworthy items: - Apple M1 gain support for PCI and pinctrl, getting a bit closer to a usable system out of the box. - Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as SM7225, 11 new smartphones, and three additional Chromebooks, and improvements all over the place. - Samsung gains support for ExynosAutov9, an automotive version of their smartphone SoC, but otherwise no major changes. - Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number of improvements for the recently added SAMA7 family. The LAN966 SoC that was added in the platform code does not have dts files yet. Two board files are added for the older at91sam9g20 SoC - Aspeed supports two additional server boards using their AST2600 as BMC, and improves support for qemu models - Rockchip RK3566/RK3688 gets added, along with six new development boards using RK3328/RK3399/RK3566, and one Chromebook tablet. - Two NAS boxes are added using the ARMv4 based Gemini platform - One new board is added to the Intel Arria SoC FPGA family - Marvell adds one network switch based on Armada 381 and the new MOCHAbin 7040 development board - NXP adds support for the S32G2 automotive SoC, two imx6 based ebook readers, and three additional development boards, which is notably less than their usual additions, but they also gain improvements to their many existing boards - STmicroelectronics adds their stm32mp13 SoC family along with a reference board - Renesas adds new versions of their R-Car Gen3 SoCs and many updates for their older generations - Broadcom adds support for a number of Cisco Meraki wireless controllers, along with two new boards and other updates for BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards - Mediatek improves support for the MT81xx SoCs used in Chromebooks as well as the MT76xx networking SoCs - NVIDIA adds a number of cleanups and additional support for more hardware on the already supported machines - TI K3 adds support for three new boards along with cleanups - Toshiba adds one board for the Visconti family - Xilinx adds five new ZynqMP based machines - Amlogic support is added for the Radxa Zero and two Jethub home automation controllers, along with changes to other machines - Rob Herring continues his work on fixing dtc warnings all over the tree. - Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon, Ux500, Unisoc" * tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits) arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address arm64: dts: apple: t8103: Add root port interrupt routing arm64: dts: apple: t8103: Add PCIe DARTs arm64: apple: Add PCIe node arm64: apple: Add pinctrl nodes ARM: dts: arm: Update ICST clock nodes 'reg' and node names ARM: dts: arm: Update register-bit-led nodes 'reg' and node names arm64: dts: exynos: add chipid node for exynosautov9 SoC ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors" arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property arm64: dts: qcom: sm8350: Add CPU topology and idle-states arm64: dts: qcom: Drop unneeded extra device-specific includes arm64: dts: qcom: msm8916: Drop standalone smem node arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes arm64: dts: qcom: msm8916-asus-z00l: Add sensors arm64: dts: qcom: msm8916-asus-z00l: Add SDCard arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node ...

Linus Torvalds committed 5 years ago

Commit ae45d842 parents 2219b0c c17c7cc706 files · +49099 −9322Browse files

Unified · Split

706 files
  1. .mailmap +1 −0
  2. Documentation/devicetree/bindings/arm/amlogic.yaml +3 −0
  3. Documentation/devicetree/bindings/arm/atmel-at91.yaml +12 −0
  4. Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml +1 −0
  5. Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml +55 −10
  6. Documentation/devicetree/bindings/arm/cpus.yaml +2 −0
  7. Documentation/devicetree/bindings/arm/fsl.yaml +61 −38
  8. Documentation/devicetree/bindings/arm/mediatek.yaml +1 −0
  9. Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml +4 −0
  10. Documentation/devicetree/bindings/arm/qcom.yaml +23 −0
  11. Documentation/devicetree/bindings/arm/renesas.yaml +61 −0
  12. Documentation/devicetree/bindings/arm/rockchip.yaml +47 −1
  13. Documentation/devicetree/bindings/arm/rockchip/pmu.yaml +4 −0
  14. Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml +6 −0
  15. Documentation/devicetree/bindings/arm/sprd/sprd.yaml +5 −0
  16. Documentation/devicetree/bindings/arm/stm32/stm32.yaml +4 −0
  17. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml +1 −0
  18. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml +38 −0
  19. Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml +33 −0
  20. Documentation/devicetree/bindings/arm/ti/k3.yaml +13 −2
  21. Documentation/devicetree/bindings/arm/toshiba.yaml +1 −0
  22. Documentation/devicetree/bindings/arm/xilinx.yaml +17 −0
  23. Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml +3 −0
  24. Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml +3 −0
  25. Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml +3 −0
  26. Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml +3 −0
  27. Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt +6 −0
  28. Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml +106 −0
  29. Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt +0 −157
  30. Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml +245 −0
  31. Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml +172 −0
  32. Documentation/devicetree/bindings/mtd/gpmc-nand.txt +0 −147
  33. Documentation/devicetree/bindings/mtd/gpmc-nor.txt +0 −98
  34. Documentation/devicetree/bindings/mtd/gpmc-onenand.txt +0 −48
  35. Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml +121 −0
  36. Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml +81 −0
  37. Documentation/devicetree/bindings/net/gpmc-eth.txt +0 −97
  38. Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt +1 −1
  39. Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt +0 −22
  40. Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml +48 −0
  41. Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml +94 −0
  42. Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml +76 −0
  43. Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml +3 −0
  44. Documentation/devicetree/bindings/vendor-prefixes.yaml +10 −0
  45. MAINTAINERS +1 −0
  46. arch/arm/boot/dts/Makefile +24 −2
  47. arch/arm/boot/dts/am335x-pocketbeagle.dts +1 −0
  48. arch/arm/boot/dts/arm-realview-eb.dtsi +29 −13
  49. arch/arm/boot/dts/arm-realview-pb1176.dts +29 −13
  50. arch/arm/boot/dts/arm-realview-pb11mp.dts +33 −15
  51. arch/arm/boot/dts/arm-realview-pbx.dtsi +29 −13
  52. arch/arm/boot/dts/armada-381-netgear-gs110emx.dts +295 −0
  53. arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts +5 −0
  54. arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts +20 −1
  55. arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts +223 −660
  56. arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts +956 −331
  57. arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts +8 −1
  58. arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts +328 −0
  59. arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts +488 −0
  60. arch/arm/boot/dts/aspeed-g4.dtsi +6 −0
  61. arch/arm/boot/dts/aspeed-g5.dtsi +6 −0
  62. arch/arm/boot/dts/aspeed-g6.dtsi +26 −0
  63. arch/arm/boot/dts/at91-lmu5000.dts +147 −0
  64. arch/arm/boot/dts/at91-q5xr5.dts +199 −0
  65. arch/arm/boot/dts/at91-sama5d27_som1.dtsi +11 −1
  66. arch/arm/boot/dts/at91-sama5d27_som1_ek.dts +21 −2
  67. arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi +70 −0
  68. arch/arm/boot/dts/at91-sama5d2_icp.dts +20 −2
  69. arch/arm/boot/dts/at91-sama7g5ek.dts +20 −0
  70. arch/arm/boot/dts/at91-tse850-3.dts +1 −1
  71. arch/arm/boot/dts/at91sam9260.dtsi +1 −1
  72. arch/arm/boot/dts/axp209.dtsi +3 −3
  73. arch/arm/boot/dts/axp22x.dtsi +3 −3
  74. arch/arm/boot/dts/axp81x.dtsi +5 −5
  75. arch/arm/boot/dts/bcm-nsp-ax.dtsi +70 −0
  76. arch/arm/boot/dts/bcm-nsp.dtsi +42 −10
  77. arch/arm/boot/dts/bcm2711-rpi-4-b.dts +9 −29
  78. arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts +138 −0
  79. arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi +113 −0
  80. arch/arm/boot/dts/bcm2835-rpi-zero-w.dts +8 −23
  81. arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts +7 −29
  82. arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts +8 −28
  83. arch/arm/boot/dts/bcm2837-rpi-3-b.dts +8 −28
  84. arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi +34 −0
  85. arch/arm/boot/dts/bcm4708-netgear-r6250.dts +38 −1
  86. arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts +37 −0
  87. arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts +1 −1
  88. arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +1 −1
  89. arch/arm/boot/dts/bcm4709-linksys-ea9200.dts +1 −1
  90. arch/arm/boot/dts/bcm4709-netgear-r7000.dts +1 −1
  91. arch/arm/boot/dts/bcm4709-netgear-r8000.dts +43 −1
  92. arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts +1 −1
  93. arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts +200 −0
  94. arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +42 −0
  95. arch/arm/boot/dts/bcm47094-linksys-panamera.dts +1 −1
  96. arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts +37 −0
  97. arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts +37 −0
  98. arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts +1 −1
  99. arch/arm/boot/dts/bcm47189-tenda-ac9.dts +37 −0
  100. arch/arm/boot/dts/bcm53016-meraki-mr32.dts +34 −1
  101. arch/arm/boot/dts/bcm5301x.dtsi +5 −5
  102. arch/arm/boot/dts/bcm53573.dtsi +18 −0
  103. arch/arm/boot/dts/bcm94708.dts +1 −1
  104. arch/arm/boot/dts/bcm94709.dts +1 −1
  105. arch/arm/boot/dts/bcm958522er.dts +2 −1
  106. arch/arm/boot/dts/bcm958525er.dts +2 −1
  107. arch/arm/boot/dts/bcm958525xmc.dts +2 −1
  108. arch/arm/boot/dts/bcm958622hr.dts +2 −1
  109. arch/arm/boot/dts/bcm958623hr.dts +2 −1
  110. arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi +281 −0
  111. arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi +163 −0
  112. arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts +25 −0
  113. arch/arm/boot/dts/bcm958625-meraki-mx64.dts +24 −0
  114. arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts +33 −0
  115. arch/arm/boot/dts/bcm958625-meraki-mx64w.dts +32 −0
  116. arch/arm/boot/dts/bcm958625-meraki-mx65.dts +24 −0
  117. arch/arm/boot/dts/bcm958625-meraki-mx65w.dts +32 −0
  118. arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi +129 −0
  119. arch/arm/boot/dts/bcm958625hr.dts +2 −1
  120. arch/arm/boot/dts/bcm958625k.dts +2 −1
  121. arch/arm/boot/dts/bcm988312hr.dts +6 −1
  122. arch/arm/boot/dts/dra7.dtsi +19 −0
  123. arch/arm/boot/dts/e60k02.dtsi +1 −1
  124. arch/arm/boot/dts/e70k02.dtsi +320 −0
  125. arch/arm/boot/dts/emev2-kzm9d.dts +1 −1
  126. arch/arm/boot/dts/exynos3250-rinato.dts +1 −0
  127. arch/arm/boot/dts/exynos4210-i9100.dts +1 −0
  128. arch/arm/boot/dts/exynos4210-origen.dts +12 −12
  129. arch/arm/boot/dts/exynos4210-trats.dts +1 −0
  130. arch/arm/boot/dts/exynos4210-universal_c210.dts +1 −0
  131. arch/arm/boot/dts/exynos4412-i9300.dts +1 −0
  132. arch/arm/boot/dts/exynos4412-i9305.dts +1 −0
  133. arch/arm/boot/dts/exynos4412-n710x.dts +1 −0
  134. arch/arm/boot/dts/exynos4412-origen.dts +7 −7
  135. arch/arm/boot/dts/exynos4412-p4note-n8010.dts +1 −0
  136. arch/arm/boot/dts/exynos4412-trats2.dts +1 −0
  137. arch/arm/boot/dts/exynos5250-arndale.dts +0 −3
  138. arch/arm/boot/dts/exynos5250-snow-rev5.dts +1 −0
  139. arch/arm/boot/dts/exynos5250-snow.dts +1 −0
  140. arch/arm/boot/dts/exynos5250-spring.dts +1 −0
  141. arch/arm/boot/dts/exynos5250.dtsi +0 −1
  142. arch/arm/boot/dts/exynos5420-peach-pit.dts +1 −0
  143. arch/arm/boot/dts/exynos5800-peach-pi.dts +1 −0
  144. arch/arm/boot/dts/gemini-dlink-dir-685.dts +0 −18
  145. arch/arm/boot/dts/gemini-ns2502.dts +148 −0
  146. arch/arm/boot/dts/gemini-sl93512r.dts +0 −18
  147. arch/arm/boot/dts/gemini-sq201.dts +0 −18
  148. arch/arm/boot/dts/gemini-ssi1328.dts +138 −0
  149. arch/arm/boot/dts/gemini-wbd111.dts +0 −18
  150. arch/arm/boot/dts/gemini-wbd222.dts +0 −18
  151. arch/arm/boot/dts/gemini.dtsi +26 −7
  152. arch/arm/boot/dts/imx6dl-alti6p.dts +1 −1
  153. arch/arm/boot/dts/imx6dl-b1x5v2.dtsi +0 −1
  154. arch/arm/boot/dts/imx6dl-prtrvt.dts +0 −2
  155. arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts +1 −0
  156. arch/arm/boot/dts/imx6dl-yapp4-common.dtsi +0 −8
  157. arch/arm/boot/dts/imx6q-skov-revc-lt2.dts +1 −0
  158. arch/arm/boot/dts/imx6qdl-apalis.dtsi +4 −3
  159. arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi +26 −5
  160. arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi +11 −1
  161. arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi +99 −0
  162. arch/arm/boot/dts/imx6qdl-tqma6.dtsi +1 −1
  163. arch/arm/boot/dts/imx6qdl.dtsi +3 −4
  164. arch/arm/boot/dts/imx6qp-prtwd3.dts +2 −2
  165. arch/arm/boot/dts/imx6qp.dtsi +1 −1
  166. arch/arm/boot/dts/imx6sl-tolino-vision5.dts +349 −0
  167. arch/arm/boot/dts/imx6sl.dtsi +8 −10
  168. arch/arm/boot/dts/imx6sll-kobo-librah2o.dts +339 −0
  169. arch/arm/boot/dts/imx6sll.dtsi +10 −12
  170. arch/arm/boot/dts/imx6sx.dtsi +3 −3
  171. arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi +11 −1
  172. arch/arm/boot/dts/imx6ul-phytec-segin.dtsi +1 −0
  173. arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts +17 −0
  174. arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi +185 −0
  175. arch/arm/boot/dts/imx6ull-colibri.dtsi +30 −2
  176. arch/arm/boot/dts/imx7-mba7.dtsi +40 −2
  177. arch/arm/boot/dts/imx7-tqma7.dtsi +45 −2
  178. arch/arm/boot/dts/imx7d-mba7.dts +3 −3
  179. arch/arm/boot/dts/imx7d-sdb.dts +1 −1
  180. arch/arm/boot/dts/imx7d-tqma7.dtsi +2 −2
  181. arch/arm/boot/dts/imx7d.dtsi +3 −4
  182. arch/arm/boot/dts/imx7s-mba7.dts +3 −3
  183. arch/arm/boot/dts/imx7s-tqma7.dtsi +2 −2
  184. arch/arm/boot/dts/integrator.dtsi +17 −6
  185. arch/arm/boot/dts/integratorap-im-pd1.dts +7 −2
  186. arch/arm/boot/dts/integratorap.dts +11 −4
  187. arch/arm/boot/dts/integratorcp.dts +6 −3
  188. arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts +2 −0
  189. arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts +2 −0
  190. arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts +2 −0
  191. arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts +2 −0
  192. arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts +2 −0
  193. arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts +2 −0
  194. arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts +2 −0
  195. arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts +2 −0
  196. arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts +2 −0
  197. arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts +2 −0
  198. arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts +2 −0
  199. arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi +8 −0
  200. arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi +2 −0
  201. arch/arm/boot/dts/intel-ixp4xx.dtsi +0 −2
  202. arch/arm/boot/dts/iwg20d-q7-common.dtsi +2 −0
  203. arch/arm/boot/dts/ls1021a-qds.dts +25 −60
  204. arch/arm/boot/dts/ls1021a-tsn.dts +2 −2
  205. arch/arm/boot/dts/ls1021a-twr.dts +7 −56
  206. arch/arm/boot/dts/ls1021a.dtsi +88 −131
  207. arch/arm/boot/dts/mps2.dtsi +8 −2
  208. arch/arm/boot/dts/mstar-v7.dtsi +9 −0
  209. arch/arm/boot/dts/mt7623.dtsi +33 −0
  210. arch/arm/boot/dts/mt7623a.dtsi +4 −0
  211. arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +25 −0
  212. arch/arm/boot/dts/mt7629-rfb.dts +2 −1
  213. arch/arm/boot/dts/mt7629.dtsi +21 −24
  214. arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi +2 −2
  215. arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi +1 −1
  216. arch/arm/boot/dts/omap-zoom-common.dtsi +2 −2
  217. arch/arm/boot/dts/omap2430-sdp.dts +2 −2
  218. arch/arm/boot/dts/omap3-cpu-thermal.dtsi +1 −1
  219. arch/arm/boot/dts/omap3-devkit8000-common.dtsi +2 −2
  220. arch/arm/boot/dts/omap3-gta04.dtsi +13 −10
  221. arch/arm/boot/dts/omap3-gta04a5.dts +2 −0
  222. arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi +1 −1
  223. arch/arm/boot/dts/omap3-sb-t35.dtsi +2 −2
  224. arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts +237 −0
  225. arch/arm/boot/dts/qcom-apq8060-dragonboard.dts +5 −5
  226. arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts +1 −1
  227. arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts +3 −3
  228. arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +3 −3
  229. arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts +2 −2
  230. arch/arm/boot/dts/qcom-apq8064.dtsi +28 −35
  231. arch/arm/boot/dts/qcom-apq8084.dtsi +4 −4
  232. arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts +1 −1
  233. arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi +0 −1
  234. arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts +1 −1
  235. arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts +1 −1
  236. arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts +1 −1
  237. arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts +1 −1
  238. arch/arm/boot/dts/qcom-ipq8064-ap148.dts +1 −1
  239. arch/arm/boot/dts/qcom-ipq8064-rb3011.dts +4 −4
  240. arch/arm/boot/dts/qcom-ipq8064.dtsi +13 −13
  241. arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi +1 −1
  242. arch/arm/boot/dts/qcom-mdm9615.dtsi +6 −10
  243. arch/arm/boot/dts/qcom-msm8226.dtsi +255 −8
  244. arch/arm/boot/dts/qcom-msm8660-surf.dts +2 −2
  245. arch/arm/boot/dts/qcom-msm8660.dtsi +8 −19
  246. arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts +3 −0
  247. arch/arm/boot/dts/qcom-msm8916-smp.dtsi +62 −0
  248. arch/arm/boot/dts/qcom-msm8960-cdp.dts +2 −2
  249. arch/arm/boot/dts/qcom-msm8960.dtsi +2 −2
  250. arch/arm/boot/dts/qcom-msm8974.dtsi +8 −8
  251. arch/arm/boot/dts/qcom-pm8226.dtsi +27 −0
  252. arch/arm/boot/dts/qcom-pm8841.dtsi +3 −4
  253. arch/arm/boot/dts/qcom-pm8941.dtsi +3 −8
  254. arch/arm/boot/dts/qcom-pma8084.dtsi +3 −8
  255. arch/arm/boot/dts/qcom-sdx55.dtsi +0 −1
  256. arch/arm/boot/dts/r7s72100-genmai.dts +2 −0
  257. arch/arm/boot/dts/r7s72100-gr-peach.dts +2 −0
  258. arch/arm/boot/dts/r7s72100-rskrza1.dts +2 −0
  259. arch/arm/boot/dts/r7s9210-rza2mevb.dts +21 −0
  260. arch/arm/boot/dts/r8a73a4-ape6evm.dts +1 −0
  261. arch/arm/boot/dts/r8a7740-armadillo800eva.dts +3 −0
  262. arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts +2 −0
  263. arch/arm/boot/dts/r8a7742-iwg21d-q7.dts +2 −0
  264. arch/arm/boot/dts/r8a7743-sk-rzg1m.dts +4 −0
  265. arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts +2 −0
  266. arch/arm/boot/dts/r8a7745-sk-rzg1e.dts +4 −0
  267. arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts +2 −0
  268. arch/arm/boot/dts/r8a7778-bockw.dts +1 −1
  269. arch/arm/boot/dts/r8a7779-marzen.dts +1 −1
  270. arch/arm/boot/dts/r8a7790-lager.dts +2 −0
  271. arch/arm/boot/dts/r8a7790-stout.dts +2 −0
  272. arch/arm/boot/dts/r8a7791-koelsch.dts +2 −0
  273. arch/arm/boot/dts/r8a7791-porter.dts +2 −0
  274. arch/arm/boot/dts/r8a7793-gose.dts +2 −0
  275. arch/arm/boot/dts/r8a7794-alt.dts +2 −0
  276. arch/arm/boot/dts/r8a7794-silk.dts +2 −0
  277. arch/arm/boot/dts/rk3036.dtsi +5 −5
  278. arch/arm/boot/dts/rk3066a-mk808.dts +27 −0
  279. arch/arm/boot/dts/rk3066a.dtsi +15 −17
  280. arch/arm/boot/dts/rk3188.dtsi +6 −7
  281. arch/arm/boot/dts/rk3229.dtsi +1 −1
  282. arch/arm/boot/dts/rk322x.dtsi +7 −7
  283. arch/arm/boot/dts/rk3288.dtsi +11 −11
  284. arch/arm/boot/dts/rv1108.dtsi +8 −8
  285. arch/arm/boot/dts/s5pv210-fascinate4g.dts +1 −0
  286. arch/arm/boot/dts/s5pv210-galaxys.dts +1 −0
  287. arch/arm/boot/dts/sama5d29.dtsi +16 −0
  288. arch/arm/boot/dts/sama7g5.dtsi +43 −0
  289. arch/arm/boot/dts/sh73a0-kzm9g.dts +1 −1
  290. arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts +112 −0
  291. arch/arm/boot/dts/spear1310.dtsi +0 −6
  292. arch/arm/boot/dts/spear1340.dtsi +0 −2
  293. arch/arm/boot/dts/ste-ab8500.dtsi +4 −9
  294. arch/arm/boot/dts/ste-ab8505.dtsi +4 −9
  295. arch/arm/boot/dts/ste-href.dtsi +6 −0
  296. arch/arm/boot/dts/ste-snowball.dts +6 −0
  297. arch/arm/boot/dts/ste-ux500-samsung-codina.dts +4 −0
  298. arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +4 −0
  299. arch/arm/boot/dts/ste-ux500-samsung-golden.dts +4 −0
  300. arch/arm/boot/dts/ste-ux500-samsung-janice.dts +7 −0
  301. arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +4 −0
  302. arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +18 −20
  303. arch/arm/boot/dts/stm32mp13-pinctrl.dtsi +64 −0
  304. arch/arm/boot/dts/stm32mp131.dtsi +283 −0
  305. arch/arm/boot/dts/stm32mp133.dtsi +37 −0
  306. arch/arm/boot/dts/stm32mp135.dtsi +12 −0
  307. arch/arm/boot/dts/stm32mp135f-dk.dts +56 −0
  308. arch/arm/boot/dts/stm32mp13xc.dtsi +17 −0
  309. arch/arm/boot/dts/stm32mp13xf.dtsi +17 −0
  310. arch/arm/boot/dts/stm32mp15-pinctrl.dtsi +4 −4
  311. arch/arm/boot/dts/stm32mp151.dtsi +9 −9
  312. arch/arm/boot/dts/stm32mp157c-odyssey.dts +6 −0
  313. arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi +1 −1
  314. arch/arm/boot/dts/stm32mp15xx-dkx.dtsi +1 −1
  315. arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +5 −6
  316. arch/arm/boot/dts/sun4i-a10.dtsi +5 −6
  317. arch/arm/boot/dts/sun5i-a13.dtsi +7 −8
  318. arch/arm/boot/dts/sun6i-a31.dtsi +20 −24
  319. arch/arm/boot/dts/sun7i-a20-bananapi.dts +8 −9
  320. arch/arm/boot/dts/sun7i-a20.dtsi +16 −18
  321. arch/arm/boot/dts/sun8i-a33.dtsi +2 −2
  322. arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +1 −1
  323. arch/arm/boot/dts/sun8i-a83t.dtsi +2 −2
  324. arch/arm/boot/dts/sun8i-h3.dtsi +2 −2
  325. arch/arm/boot/dts/sun8i-r40.dtsi +39 −0
  326. arch/arm/boot/dts/sun8i-v3-sl631.dtsi +1 −1
  327. arch/arm/boot/dts/sun9i-a80-cubieboard4.dts +1 −1
  328. arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi +1 −1
  329. arch/arm/boot/dts/tegra114.dtsi +6 −2
  330. arch/arm/boot/dts/tegra124.dtsi +9 −3
  331. arch/arm/boot/dts/tegra20-acer-a500-picasso.dts +5 −2
  332. arch/arm/boot/dts/tegra20-paz00.dts +0 −2
  333. arch/arm/boot/dts/tegra20.dtsi +9 −4
  334. arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi +27 −3
  335. arch/arm/boot/dts/tegra30-ouya.dts +4 −1
  336. arch/arm/boot/dts/tegra30.dtsi +9 −3
  337. arch/arm/boot/dts/versatile-ab-ib2.dts +5 −1
  338. arch/arm/boot/dts/versatile-ab.dts +19 −8
  339. arch/arm/mach-qcom/Kconfig +10 −0
  340. arch/arm64/boot/dts/allwinner/axp803.dtsi +5 −5
  341. arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi +3 −3
  342. arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi +1 −1
  343. arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts +1 −1
  344. arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts +27 −1
  345. arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts +2 −1
  346. arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +17 −0
  347. arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi +1 −1
  348. arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts +8 −1
  349. arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi +1 −1
  350. arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi +1 −1
  351. arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi +4 −4
  352. arch/arm64/boot/dts/amlogic/Makefile +3 −0
  353. arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts +362 −0
  354. arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts +405 −0
  355. arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +1 −1
  356. arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts +1 −1
  357. arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts +1 −1
  358. arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi +2 −2
  359. arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi +4 −2
  360. arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi +2 −2
  361. arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts +241 −0
  362. arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts +61 −0
  363. arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts +1 −1
  364. arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts +1 −1
  365. arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi +5 −1
  366. arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +1 −1
  367. arch/arm64/boot/dts/apple/t8103-j274.dts +23 −0
  368. arch/arm64/boot/dts/apple/t8103.dtsi +207 −0
  369. arch/arm64/boot/dts/arm/juno-motherboard.dtsi +19 −8
  370. arch/arm64/boot/dts/broadcom/Makefile +1 −0
  371. arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts +2 −0
  372. arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +8 −8
  373. arch/arm64/boot/dts/exynos/Makefile +2 −1
  374. arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi +5 −5
  375. arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +1 −0
  376. arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +1 −0
  377. arch/arm64/boot/dts/exynos/exynos5433.dtsi +3 −3
  378. arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi +1189 −0
  379. arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts +56 −0
  380. arch/arm64/boot/dts/exynos/exynosautov9.dtsi +306 −0
  381. arch/arm64/boot/dts/freescale/Makefile +4 −0
  382. arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +1 −0
  383. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts +28 −32
  384. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts +4 −13
  385. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts +23 −26
  386. arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +18 −13
  387. arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +9 −1
  388. arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +10 −9
  389. arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +45 −27
  390. arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +20 −20
  391. arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +20 −20
  392. arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts +34 −0
  393. arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts +658 −0
  394. arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +12 −12
  395. arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts +29 −3
  396. arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi +3 −1
  397. arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi +1 −1
  398. arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi +1 −1
  399. arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi +1 −1
  400. arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts +24 −0
  401. arch/arm64/boot/dts/freescale/imx8mm.dtsi +180 −0
  402. arch/arm64/boot/dts/freescale/imx8mp.dtsi +1 −1
  403. arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +43 −3
  404. arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts +1 −0
  405. arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi +2 −0
  406. arch/arm64/boot/dts/freescale/imx8mq.dtsi +4 −6
  407. arch/arm64/boot/dts/freescale/s32g2.dtsi +124 −0
  408. arch/arm64/boot/dts/freescale/s32g274a-evb.dts +34 −0
  409. arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts +40 −0
  410. arch/arm64/boot/dts/hisilicon/hi3660.dtsi +4 −4
  411. arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts +3 −19
  412. arch/arm64/boot/dts/hisilicon/hi3670.dtsi +1 −1
  413. arch/arm64/boot/dts/hisilicon/hi6220.dtsi +2 −2
  414. arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi +86 −0
  415. arch/arm64/boot/dts/marvell/Makefile +1 −0
  416. arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts +458 −0
  417. arch/arm64/boot/dts/mediatek/mt2712e.dtsi +50 −47
  418. arch/arm64/boot/dts/mediatek/mt6358.dtsi +1 −0
  419. arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts +7 −9
  420. arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts +1 −5
  421. arch/arm64/boot/dts/mediatek/mt7622.dtsi +60 −52
  422. arch/arm64/boot/dts/mediatek/mt8173.dtsi +2 −0
  423. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi +13 −0
  424. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi +13 −0
  425. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi +54 −0
  426. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi +13 −0
  427. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi +13 −0
  428. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi +13 −0
  429. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi +13 −0
  430. arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi +32 −0
  431. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts +1 −0
  432. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts +1 −0
  433. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi +1 −0
  434. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts +1 −0
  435. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts +1 −0
  436. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts +1 −0
  437. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts +1 −0
  438. arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts +1 −0
  439. arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts +1 −0
  440. arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi +1 −0
  441. arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi +5 −0
  442. arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi +63 −4
  443. arch/arm64/boot/dts/mediatek/mt8183.dtsi +96 −3
  444. arch/arm64/boot/dts/mediatek/mt8192.dtsi +163 −0
  445. arch/arm64/boot/dts/nvidia/tegra132-norrin.dts +0 −2
  446. arch/arm64/boot/dts/nvidia/tegra132.dtsi +9 −3
  447. arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +1399 −155
  448. arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts +505 −1
  449. arch/arm64/boot/dts/nvidia/tegra186.dtsi +136 −0
  450. arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts +1368 −127
  451. arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi +1383 −139
  452. arch/arm64/boot/dts/nvidia/tegra194.dtsi +204 −5
  453. arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts +876 −0
  454. arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +876 −0
  455. arch/arm64/boot/dts/nvidia/tegra210.dtsi +79 −2
  456. arch/arm64/boot/dts/qcom/Makefile +12 −0
  457. arch/arm64/boot/dts/qcom/apq8016-sbc.dts +831 −1
  458. arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +0 −826
  459. arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts +1 −0
  460. arch/arm64/boot/dts/qcom/apq8096-db820c.dts +1069 −1
  461. arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +0 −1105
  462. arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts +0 −3
  463. arch/arm64/boot/dts/qcom/ipq6018.dtsi +87 −6
  464. arch/arm64/boot/dts/qcom/ipq8074-hk01.dts +6 −0
  465. arch/arm64/boot/dts/qcom/ipq8074.dtsi +76 −16
  466. arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts +1 −0
  467. arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts +126 −0
  468. arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts +1 −0
  469. arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +44 −19
  470. arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts +1 −0
  471. arch/arm64/boot/dts/qcom/msm8916-mtp.dts +14 −1
  472. arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi +0 −21
  473. arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts +1 −0
  474. arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts +1 −0
  475. arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts +534 −0
  476. arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts +1 −0
  477. arch/arm64/boot/dts/qcom/msm8916.dtsi +73 −16
  478. arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts +2 −0
  479. arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts +1 −0
  480. arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts +2 −0
  481. arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts +1 −0
  482. arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts +1 −0
  483. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts +1 −0
  484. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts +1 −0
  485. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts +1 −0
  486. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts +1 −0
  487. arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts +1 −0
  488. arch/arm64/boot/dts/qcom/msm8994.dtsi +1 −1
  489. arch/arm64/boot/dts/qcom/msm8996-mtp.dts +23 −1
  490. arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi +0 −30
  491. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts +1 −0
  492. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts +1 −0
  493. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts +1 −0
  494. arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi +1 −0
  495. arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi +673 −0
  496. arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts +465 −0
  497. arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts +432 −0
  498. arch/arm64/boot/dts/qcom/msm8996.dtsi +86 −10
  499. arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts +1 −0
  500. arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi +2 −0
  501. arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts +320 −0
  502. arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts +1 −0
  503. arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts +1 −0
  504. arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi +0 −4
  505. arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts +1 −0
  506. arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi +0 −4
  507. arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts +1 −0
  508. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts +31 −0
  509. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts +55 −0
  510. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts +36 −0
  511. arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi +670 −0
  512. arch/arm64/boot/dts/qcom/msm8998.dtsi +200 −23
  513. arch/arm64/boot/dts/qcom/pm6150l.dtsi +1 −0
  514. arch/arm64/boot/dts/qcom/pm6350.dtsi +54 −0
  515. arch/arm64/boot/dts/qcom/pm660.dtsi +3 −2
  516. arch/arm64/boot/dts/qcom/pm660l.dtsi +0 −7
  517. arch/arm64/boot/dts/qcom/pm8916.dtsi +12 −6
  518. arch/arm64/boot/dts/qcom/pm8994.dtsi +4 −9
  519. arch/arm64/boot/dts/qcom/pmi8994.dtsi +1 −4
  520. arch/arm64/boot/dts/qcom/pmi8998.dtsi +12 −0
  521. arch/arm64/boot/dts/qcom/pmk8350.dtsi +1 −0
  522. arch/arm64/boot/dts/qcom/qcs404.dtsi +6 −1
  523. arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +2 −2
  524. arch/arm64/boot/dts/qcom/sa8155p-adp.dts +10 −2
  525. arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +14 −0
  526. arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +2 −1
  527. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts +20 −0
  528. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts +15 −0
  529. arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi +336 −0
  530. arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +13 −0
  531. arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +11 −0
  532. arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi +109 −0
  533. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +8 −0
  534. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +8 −0
  535. arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +5 −4
  536. arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts +1 −0
  537. arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi +90 −0
  538. arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +2 −99
  539. arch/arm64/boot/dts/qcom/sc7180.dtsi +52 −33
  540. arch/arm64/boot/dts/qcom/sc7280-herobrine.dts +14 −0
  541. arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi +1412 −0
  542. arch/arm64/boot/dts/qcom/sc7280-idp.dts +12 −0
  543. arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +265 −6
  544. arch/arm64/boot/dts/qcom/sc7280-idp2.dts +8 −0
  545. arch/arm64/boot/dts/qcom/sc7280.dtsi +2769 −793
  546. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts +1 −0
  547. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts +1 −0
  548. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts +1 −0
  549. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts +1 −0
  550. arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +4 −4
  551. arch/arm64/boot/dts/qcom/sdm630.dtsi +57 −1
  552. arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts +1 −0
  553. arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi +12 −5
  554. arch/arm64/boot/dts/qcom/sdm845-db845c.dts +11 −5
  555. arch/arm64/boot/dts/qcom/sdm845-mtp.dts +10 −8
  556. arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi +17 −9
  557. arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts +1 −0
  558. arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts +1 −0
  559. arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts +11 −8
  560. arch/arm64/boot/dts/qcom/sdm845.dtsi +73 −170
  561. arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +16 −5
  562. arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts +1 −0
  563. arch/arm64/boot/dts/qcom/sm6125.dtsi +32 −27
  564. arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts +58 −0
  565. arch/arm64/boot/dts/qcom/sm6350.dtsi +965 −0
  566. arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts +320 −0
  567. arch/arm64/boot/dts/qcom/sm7225.dtsi +16 −0
  568. arch/arm64/boot/dts/qcom/sm8150-hdk.dts +0 −2
  569. arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts +1 −2
  570. arch/arm64/boot/dts/qcom/sm8150-mtp.dts +0 −2
  571. arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts +1 −0
  572. arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts +1 −0
  573. arch/arm64/boot/dts/qcom/sm8150.dtsi +142 −19
  574. arch/arm64/boot/dts/qcom/sm8250-hdk.dts +0 −2
  575. arch/arm64/boot/dts/qcom/sm8250-mtp.dts +0 −2
  576. arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts +1 −0
  577. arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts +1 −0
  578. arch/arm64/boot/dts/qcom/sm8250.dtsi +26 −26
  579. arch/arm64/boot/dts/qcom/sm8350-hdk.dts +0 −2
  580. arch/arm64/boot/dts/qcom/sm8350-mtp.dts +4 −2
  581. arch/arm64/boot/dts/qcom/sm8350.dtsi +282 −20
  582. arch/arm64/boot/dts/renesas/Makefile +2 −0
  583. arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi +3 −0
  584. arch/arm64/boot/dts/renesas/cat875.dtsi +2 −0
  585. arch/arm64/boot/dts/renesas/draak.dtsi +686 −0
  586. arch/arm64/boot/dts/renesas/ebisu.dtsi +803 −0
  587. arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi +2 −0
  588. arch/arm64/boot/dts/renesas/r8a77961.dtsi +11 −0
  589. arch/arm64/boot/dts/renesas/r8a77970-eagle.dts +4 −0
  590. arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts +4 −0
  591. arch/arm64/boot/dts/renesas/r8a77980-condor.dts +4 −0
  592. arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts +4 −0
  593. arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts +1 −787
  594. arch/arm64/boot/dts/renesas/r8a77995-draak.dts +1 −670
  595. arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi +70 −0
  596. arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts +2 −0
  597. arch/arm64/boot/dts/renesas/r8a779a0.dtsi +1458 −0
  598. arch/arm64/boot/dts/renesas/r8a779m0.dtsi +12 −0
  599. arch/arm64/boot/dts/renesas/r8a779m1.dtsi +9 −0
  600. arch/arm64/boot/dts/renesas/r8a779m2.dtsi +12 −0
  601. arch/arm64/boot/dts/renesas/r8a779m3.dtsi +9 −0
  602. arch/arm64/boot/dts/renesas/r8a779m4.dtsi +12 −0
  603. arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts +36 −0
  604. arch/arm64/boot/dts/renesas/r8a779m5.dtsi +21 −0
  605. arch/arm64/boot/dts/renesas/r8a779m6.dtsi +12 −0
  606. arch/arm64/boot/dts/renesas/r8a779m7.dtsi +12 −0
  607. arch/arm64/boot/dts/renesas/r8a779m8.dtsi +12 −0
  608. arch/arm64/boot/dts/renesas/r9a07g044.dtsi +337 −0
  609. arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts +1 −6
  610. arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi +275 −0
  611. arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi +289 −3
  612. arch/arm64/boot/dts/renesas/salvator-common.dtsi +30 −26
  613. arch/arm64/boot/dts/renesas/ulcb.dtsi +2 −0
  614. arch/arm64/boot/dts/rockchip/Makefile +6 −0
  615. arch/arm64/boot/dts/rockchip/px30-evb.dts +52 −0
  616. arch/arm64/boot/dts/rockchip/px30.dtsi +120 −6
  617. arch/arm64/boot/dts/rockchip/rk3308.dtsi +43 −6
  618. arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts +0 −3
  619. arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts +27 −1
  620. arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts +110 −0
  621. arch/arm64/boot/dts/rockchip/rk3328-rock64.dts +1 −1
  622. arch/arm64/boot/dts/rockchip/rk3328.dtsi +6 −11
  623. arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi +33 −14
  624. arch/arm64/boot/dts/rockchip/rk3368.dtsi +182 −9
  625. arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts +1 −0
  626. arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi +176 −0
  627. arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts +1 −0
  628. arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts +41 −0
  629. arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi +182 −0
  630. arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi +2 −2
  631. arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts +36 −0
  632. arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi +3 −3
  633. arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi +3 −3
  634. arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts +2 −5
  635. arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts +218 −0
  636. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi +54 −0
  637. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts +14 −0
  638. arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts +47 −0
  639. arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +29 −0
  640. arch/arm64/boot/dts/rockchip/rk3399.dtsi +104 −12
  641. arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +548 −0
  642. arch/arm64/boot/dts/rockchip/rk3566.dtsi +20 −0
  643. arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts +313 −0
  644. arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi +9 −0
  645. arch/arm64/boot/dts/rockchip/rk3568.dtsi +74 −570
  646. arch/arm64/boot/dts/rockchip/rk356x.dtsi +1145 −0
  647. arch/arm64/boot/dts/ti/Makefile +3 −1
  648. arch/arm64/boot/dts/ti/k3-am64-main.dtsi +280 −0
  649. arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi +8 −0
  650. arch/arm64/boot/dts/ti/k3-am64.dtsi +2 −0
  651. arch/arm64/boot/dts/ti/k3-am642-evm.dts +8 −0
  652. arch/arm64/boot/dts/ti/k3-am642-sk.dts +8 −0
  653. arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi +46 −0
  654. arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi +51 −0
  655. arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi +28 −11
  656. arch/arm64/boot/dts/ti/k3-am65-main.dtsi +4 −4
  657. arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi +0 −4
  658. arch/arm64/boot/dts/ti/k3-am65.dtsi +2 −0
  659. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi +60 −0
  660. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts +24 −0
  661. arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts +7 −49
  662. arch/arm64/boot/dts/ti/k3-am654.dtsi +4 −0
  663. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +56 −0
  664. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts +29 −0
  665. arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts +7 −43
  666. arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +3 −0
  667. arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +4 −3
  668. arch/arm64/boot/dts/ti/k3-j7200.dtsi +2 −0
  669. arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts +3 −0
  670. arch/arm64/boot/dts/ti/k3-j721e-main.dtsi +8 −8
  671. arch/arm64/boot/dts/ti/k3-j721e-sk.dts +1002 −0
  672. arch/arm64/boot/dts/ti/k3-j721e.dtsi +3 −0
  673. arch/arm64/boot/dts/toshiba/Makefile +1 −0
  674. arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts +6 −0
  675. arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts +61 −0
  676. arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi +44 −0
  677. arch/arm64/boot/dts/toshiba/tmpv7708.dtsi +59 −0
  678. arch/arm64/boot/dts/xilinx/Makefile +14 −0
  679. arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi +12 −1
  680. arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts +315 −0
  681. arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts +298 −0
  682. arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts +289 −0
  683. arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts +21 −0
  684. arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts +15 −1
  685. arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts +15 −1
  686. arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts +17 −1
  687. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts +297 −1
  688. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts +337 −5
  689. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts +48 −1
  690. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts +23 −1
  691. arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts +329 −1
  692. arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts +258 −6
  693. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts +15 −0
  694. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts +318 −2
  695. arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts +2 −1
  696. arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts +282 −10
  697. arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts +239 −11
  698. arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts +327 −13
  699. arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts +264 −10
  700. arch/arm64/boot/dts/xilinx/zynqmp.dtsi +61 −32
  701. drivers/watchdog/mtk_wdt.c +3 −3
  702. include/dt-bindings/power/imx8mm-power.h +9 −0
  703. include/dt-bindings/reset/mt2712-resets.h +0 −0
  704. include/dt-bindings/reset/mt8173-resets.h +2 −0
  705. include/dt-bindings/reset/mt8183-resets.h +3 −0
  706. include/dt-bindings/reset/mt8192-resets.h +0 −0
.mailmap+1−0
@@ -279,6 +279,7 @@ Nicolas Pitre <nico@fluxnic.net> <nicolas.pitre@linaro.org> · 278 unmodified lines
279279 Nicolas Pitre <nico@fluxnic.net> <nico@linaro.org>
280280 Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.de>
281281 Nicolas Saenz Julienne <nsaenz@kernel.org> <nsaenzjulienne@suse.com>
282+Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
282283 Oleksij Rempel <linux@rempel-privat.de> <bug-track@fisher-privat.net>
283284 Oleksij Rempel <linux@rempel-privat.de> <external.Oleksij.Rempel@de.bosch.com>
284285 Oleksij Rempel <linux@rempel-privat.de> <fixed-term.Oleksij.Rempel@de.bosch.com>
Documentation/devicetree/bindings/arm/amlogic.yaml+3−0
@@ -86,6 +86,7 @@ properties: · 85 unmodified lines
8686 - enum:
8787 - amlogic,p281
8888 - oranth,tx3-mini
89+ - jethome,jethub-j80
8990 - const: amlogic,s905w
9091 - const: amlogic,meson-gxl
9192
@@ -133,6 +134,7 @@ properties: · 41 unmodified lines
133134 items:
134135 - enum:
135136 - amlogic,s400
137+ - jethome,jethub-j100
136138 - const: amlogic,a113d
137139 - const: amlogic,meson-axg
138140
@@ -141,6 +143,7 @@ properties: · 2 unmodified lines
141143 - enum:
142144 - amediatech,x96-max
143145 - amlogic,u200
146+ - radxa,zero
144147 - seirobotics,sei510
145148 - const: amlogic,g12a
146149
Documentation/devicetree/bindings/arm/atmel-at91.yaml+12−0
@@ -126,6 +126,18 @@ properties: · 125 unmodified lines
126126 - const: atmel,sama5d3
127127 - const: atmel,sama5
128128
129+ - description: CalAmp LMU5000 board
130+ items:
131+ - const: calamp,lmu5000
132+ - const: atmel,at91sam9g20
133+ - const: atmel,at91sam9
134+
135+ - description: Exegin Q5xR5 board
136+ items:
137+ - const: exegin,q5xr5
138+ - const: atmel,at91sam9g20
139+ - const: atmel,at91sam9
140+
129141 - items:
130142 - enum:
131143 - atmel,sama5d31
Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml+1−0
@@ -19,6 +19,7 @@ properties: · 18 unmodified lines
1919 items:
2020 - enum:
2121 - raspberrypi,400
22+ - raspberrypi,4-compute-module
2223 - raspberrypi,4-model-b
2324 - const: brcm,bcm2711
2425
Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml+55−10
@@ -22,16 +22,61 @@ properties: · 21 unmodified lines
2222 $nodename:
2323 const: '/'
2424 compatible:
25− items:
26− - enum:
27− - brcm,bcm58522
28− - brcm,bcm58525
29− - brcm,bcm58535
30− - brcm,bcm58622
31− - brcm,bcm58623
32− - brcm,bcm58625
33− - brcm,bcm88312
34− - const: brcm,nsp
25+ oneOf:
26+ - description: BCM58522 based boards
27+ items:
28+ - enum:
29+ - brcm,bcm958522er
30+ - const: brcm,bcm58522
31+ - const: brcm,nsp
32+
33+ - description: BCM58525 based boards
34+ items:
35+ - enum:
36+ - brcm,bcm958525er
37+ - brcm,bcm958525xmc
38+ - const: brcm,bcm58525
39+ - const: brcm,nsp
40+
41+ - description: BCM58535 based boards
42+ items:
43+ - const: brcm,bcm58535
44+ - const: brcm,nsp
45+
46+ - description: BCM58622 based boards
47+ items:
48+ - enum:
49+ - brcm,bcm958622hr
50+ - const: brcm,bcm58622
51+ - const: brcm,nsp
52+
53+ - description: BCM58623 based boards
54+ items:
55+ - enum:
56+ - brcm,bcm958623hr
57+ - const: brcm,bcm58623
58+ - const: brcm,nsp
59+
60+ - description: BCM58625 based boards
61+ items:
62+ - enum:
63+ - brcm,bcm958625hr
64+ - brcm,bcm958625k
65+ - meraki,mx64
66+ - meraki,mx64-a0
67+ - meraki,mx64w
68+ - meraki,mx64w-a0
69+ - meraki,mx65
70+ - meraki,mx65w
71+ - const: brcm,bcm58625
72+ - const: brcm,nsp
73+
74+ - description: BCM88312 based boards
75+ items:
76+ - enum:
77+ - brcm,bcm988312hr
78+ - const: brcm,bcm88312
79+ - const: brcm,nsp
3580
3681 additionalProperties: true
3782
Documentation/devicetree/bindings/arm/cpus.yaml+2−0
@@ -171,6 +171,8 @@ properties: · 170 unmodified lines
171171 - qcom,kryo385
172172 - qcom,kryo468
173173 - qcom,kryo485
174+ - qcom,kryo560
175+ - qcom,kryo570
174176 - qcom,kryo685
175177 - qcom,scorpion
176178
Documentation/devicetree/bindings/arm/fsl.yaml+61−38
@@ -235,7 +235,7 @@ properties: · 234 unmodified lines
235235 - technexion,imx6q-pico-pi # TechNexion i.MX6Q Pico-Pi
236236 - technologic,imx6q-ts4900
237237 - technologic,imx6q-ts7970
238− - toradex,apalis_imx6q # Apalis iMX6 Module
238+ - toradex,apalis_imx6q # Apalis iMX6 Modules
239239 - udoo,imx6q-udoo # Udoo i.MX6 Quad Board
240240 - uniwest,imx6q-evi # Uniwest Evi
241241 - variscite,dt6customboard
@@ -314,18 +314,12 @@ properties: · 72 unmodified lines
314314 - const: phytec,imx6q-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
315315 - const: fsl,imx6q
316316
317− - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Module
317+ - description: i.MX6Q Boards with Toradex Apalis iMX6Q/D Modules
318318 items:
319319 - enum:
320− - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
321− - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
322− - const: toradex,apalis_imx6q
323− - const: fsl,imx6q
324−
325− - description: i.MX6Q Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1
326− items:
327− - const: toradex,apalis_imx6q-ixora-v1.1
328− - const: toradex,apalis_imx6q-ixora
320+ - toradex,apalis_imx6q-ixora # Apalis iMX6Q/D Module on Ixora Carrier Board
321+ - toradex,apalis_imx6q-ixora-v1.1 # Apalis iMX6Q/D Module on Ixora V1.1 Carrier Board
322+ - toradex,apalis_imx6q-eval # Apalis iMX6Q/D Module on Apalis Evaluation Board
329323 - const: toradex,apalis_imx6q
330324 - const: fsl,imx6q
331325
@@ -393,6 +387,8 @@ properties: · 61 unmodified lines
393387 - technexion,imx6dl-pico-pi # TechNexion i.MX6DL Pico-Pi
394388 - technologic,imx6dl-ts4900
395389 - technologic,imx6dl-ts7970
390+ - toradex,colibri_imx6dl # Colibri iMX6 Modules
391+ - toradex,colibri_imx6dl-v1_1 # Colibri iMX6 V1.1 Modules
396392 - udoo,imx6dl-udoo # Udoo i.MX6 Dual-lite Board
397393 - vdl,lanmcu # Van der Laan LANMCU board
398394 - wand,imx6dl-wandboard # Wandboard i.MX6 Dual Lite Board
@@ -466,20 +462,18 @@ properties: · 67 unmodified lines
466462 - const: phytec,imx6dl-pfla02 # PHYTEC phyFLEX-i.MX6 Quad
467463 - const: fsl,imx6dl
468464
469− - description: i.MX6DL Toradex Colibri iMX6 Module on Colibri
470− Evaluation Board V3
465+ - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S Modules
471466 items:
472− - const: toradex,colibri_imx6dl-eval-v3
473− - const: toradex,colibri_imx6dl # Colibri iMX6 Module
467+ - enum:
468+ - toradex,colibri_imx6dl-eval-v3 # Colibri iMX6DL/S Module on Colibri Evaluation Board V3
469+ - const: toradex,colibri_imx6dl # Colibri iMX6DL/S Module
474470 - const: fsl,imx6dl
475471
476− - description: i.MX6DL Toradex Colibri iMX6 Module V1.1 on Colibri
477− Evaluation Board V3
472+ - description: i.MX6DL Boards with Toradex Colibri iMX6DL/S V1.1 Modules
478473 items:
479− - const: toradex,colibri_imx6dl-v1_1-eval-v3
480− - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6 Module V1.1
481− - const: toradex,colibri_imx6dl-eval-v3
482− - const: toradex,colibri_imx6dl # Colibri iMX6 Module
474+ - enum:
475+ - toradex,colibri_imx6dl-v1_1-eval-v3 # Colibri iMX6DL/S V1.1 M. on Colibri Evaluation Board V3
476+ - const: toradex,colibri_imx6dl-v1_1 # Colibri iMX6DL/S V1.1 Module
483477 - const: fsl,imx6dl
484478
485479 - description: i.MX6S DHCOM DRC02 Board
@@ -494,6 +488,7 @@ properties: · 8 unmodified lines
494488 - fsl,imx6sl-evk # i.MX6 SoloLite EVK Board
495489 - kobo,tolino-shine2hd
496490 - kobo,tolino-shine3
491+ - kobo,tolino-vision5
497492 - revotics,imx6sl-warp # Revotics WaRP Board
498493 - const: fsl,imx6sl
499494
@@ -502,6 +497,7 @@ properties: · 2 unmodified lines
502497 - enum:
503498 - fsl,imx6sll-evk
504499 - kobo,clarahd
500+ - kobo,librah2o
505501 - const: fsl,imx6sll
506502
507503 - description: i.MX6SX based Boards
@@ -586,8 +582,9 @@ properties: · 78 unmodified lines
586582 - fsl,imx6ull-14x14-evk # i.MX6 UltraLiteLite 14x14 EVK Board
587583 - kontron,imx6ull-n6411-som # Kontron N6411 SOM
588584 - myir,imx6ull-mys-6ulx-eval # MYiR Tech iMX6ULL Evaluation Board
589− - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Eval Board
590− - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT Module on Colibri Eval Board
585+ - toradex,colibri-imx6ull # Colibri iMX6ULL Modules
586+ - toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
587+ - toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Modules
591588 - const: fsl,imx6ull
592589
593590 - description: i.MX6ULL Armadeus Systems OPOS6ULDev Board
@@ -605,6 +602,27 @@ properties: · 11 unmodified lines
605602 - const: phytec,imx6ull-pcl063 # PHYTEC phyCORE-i.MX 6ULL
606603 - const: fsl,imx6ull
607604
605+ - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Modules
606+ items:
607+ - enum:
608+ - toradex,colibri-imx6ull-eval # Colibri iMX6ULL Module on Colibri Evaluation Board
609+ - const: toradex,colibri-imx6ull # Colibri iMX6ULL Module
610+ - const: fsl,imx6dl
611+
612+ - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL 1GB (eMMC) Module
613+ items:
614+ - enum:
615+ - toradex,colibri-imx6ull-emmc-eval # Colibri iMX6ULL 1GB (eMMC) M. on Colibri Evaluation Board
616+ - const: toradex,colibri-imx6ull-emmc # Colibri iMX6ULL 1GB (eMMC) Module
617+ - const: fsl,imx6dl
618+
619+ - description: i.MX6ULL Boards with Toradex Colibri iMX6ULL Wi-Fi / BT Modules
620+ items:
621+ - enum:
622+ - toradex,colibri-imx6ull-wifi-eval # Colibri iMX6ULL Wi-Fi / BT M. on Colibri Evaluation Board
623+ - const: toradex,colibri-imx6ull-wifi # Colibri iMX6ULL Wi-Fi / BT Module
624+ - const: fsl,imx6dl
625+
608626 - description: Kontron N6411 S Board
609627 items:
610628 - const: kontron,imx6ull-n6411-s
@@ -622,6 +640,7 @@ properties: · 11 unmodified lines
622640 items:
623641 - enum:
624642 - element14,imx7s-warp # Element14 Warp i.MX7 Board
643+ - toradex,colibri-imx7s # Colibri iMX7S Module
625644 - const: fsl,imx7s
626645
627646 - description: i.MX7S Boards with Toradex Colibri iMX7S Module
@@ -653,15 +672,8 @@ properties: · 25 unmodified lines
653672 - technexion,imx7d-pico-hobbit # TechNexion i.MX7D Pico-Hobbit
654673 - technexion,imx7d-pico-nymph # TechNexion i.MX7D Pico-Nymph
655674 - technexion,imx7d-pico-pi # TechNexion i.MX7D Pico-Pi
656− - toradex,colibri-imx7d # Colibri iMX7 Dual Module
657− - toradex,colibri-imx7d-aster # Colibri iMX7 Dual Module on Aster Carrier Board
658− - toradex,colibri-imx7d-emmc # Colibri iMX7 Dual 1GB (eMMC) Module
659− - toradex,colibri-imx7d-emmc-aster # Colibri iMX7 Dual 1GB (eMMC) Module on
660− # Aster Carrier Board
661− - toradex,colibri-imx7d-emmc-eval-v3 # Colibri iMX7 Dual 1GB (eMMC) Module on
662− # Colibri Evaluation Board V3
663− - toradex,colibri-imx7d-eval-v3 # Colibri iMX7 Dual Module on
664− # Colibri Evaluation Board V3
675+ - toradex,colibri-imx7d # Colibri iMX7D Module
676+ - toradex,colibri-imx7d-emmc # Colibri iMX7D 1GB (eMMC) Module
665677 - zii,imx7d-rmu2 # ZII RMU2 Board
666678 - zii,imx7d-rpu2 # ZII RPU2 Board
667679 - const: fsl,imx7d
@@ -686,12 +698,12 @@ properties: · 18 unmodified lines
686698 - description: i.MX7D Boards with Toradex Colibri i.MX7D Module
687699 items:
688700 - enum:
689− - toradex,colibri-imx7d-aster # Module on Aster Carrier Board
690− - toradex,colibri-imx7d-eval-v3 # Module on Colibri Evaluation Board V3
701+ - toradex,colibri-imx7d-aster # Colibri iMX7D Module on Aster Carrier Board
702+ - toradex,colibri-imx7d-eval-v3 # Colibri iMX7D Module on Colibri Evaluation Board V3
691703 - const: toradex,colibri-imx7d
692704 - const: fsl,imx7d
693705
694− - description: i.MX7D Boards with Toradex Colibri i.MX7D eMMC Module
706+ - description: i.MX7D Boards with Toradex Colibri i.MX7D 1GB (eMMC) Module
695707 items:
696708 - enum:
697709 - toradex,colibri-imx7d-emmc-aster # Module on Aster Carrier Board
@@ -812,10 +824,10 @@ properties: · 114 unmodified lines
812824 - enum:
813825 - einfochips,imx8qxp-ai_ml # i.MX8QXP AI_ML Board
814826 - fsl,imx8qxp-mek # i.MX8QXP MEK Board
815− - toradex,colibri-imx8x # Colibri iMX8X Module
827+ - toradex,colibri-imx8x # Colibri iMX8X Modules
816828 - const: fsl,imx8qxp
817829
818− - description: Toradex Colibri i.MX8 Evaluation Board
830+ - description: i.MX8QXP Boards with Toradex Coilbri iMX8X Modules
819831 items:
820832 - enum:
821833 - toradex,colibri-imx8x-eval-v3 # Colibri iMX8X Module on Colibri Evaluation Board V3
@@ -847,9 +859,10 @@ properties: · 25 unmodified lines
847859 - description: VF610 based Boards
848860 items:
849861 - enum:
862+ - fsl,vf610-twr # VF610 Tower Board
850863 - lwn,bk4 # Liebherr BK4 controller
851864 - phytec,vf610-cosmic # PHYTEC Cosmic/Cosmic+ Board
852− - fsl,vf610-twr # VF610 Tower Board
865+ - toradex,vf610-colibri_vf61 # Colibri VF61 Modules
853866 - const: fsl,vf610
854867
855868 - description: Toradex Colibri VF61 Module on Colibri Evaluation Board
@@ -886,6 +899,7 @@ properties: · 30 unmodified lines
886899 - enum:
887900 - fsl,ls1021a-moxa-uc-8410a
888901 - fsl,ls1021a-qds
902+ - fsl,ls1021a-tsn
889903 - fsl,ls1021a-twr
890904 - const: fsl,ls1021a
891905
@@ -977,6 +991,8 @@ properties: · 85 unmodified lines
977991 - description: LX2160A based Boards
978992 items:
979993 - enum:
994+ - fsl,lx2160a-bluebox3
995+ - fsl,lx2160a-bluebox3-rev-a
980996 - fsl,lx2160a-qds
981997 - fsl,lx2160a-rdb
982998 - fsl,lx2162a-qds
@@ -990,6 +1006,13 @@ properties: · 7 unmodified lines
9901006 - const: solidrun,lx2160a-cex7
9911007 - const: fsl,lx2160a
9921008
1009+ - description: S32G2 based Boards
1010+ items:
1011+ - enum:
1012+ - nxp,s32g274a-evb
1013+ - nxp,s32g274a-rdb2
1014+ - const: nxp,s32g2
1015+
9931016 - description: S32V234 based Boards
9941017 items:
9951018 - enum:
Documentation/devicetree/bindings/arm/mediatek.yaml+1−0
@@ -32,6 +32,7 @@ properties: · 31 unmodified lines
3232 - const: mediatek,mt6580
3333 - items:
3434 - enum:
35+ - fairphone,fp1
3536 - mundoreader,bq-aquaris5
3637 - const: mediatek,mt6589
3738 - items:
Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.yaml+4−0
@@ -43,6 +43,9 @@ properties: · 42 unmodified lines
4343 "#clock-cells":
4444 const: 1
4545
46+ '#reset-cells':
47+ const: 1
48+
4649 required:
4750 - compatible
4851 - reg
@@ -56,4 +59,5 @@ examples: · 7 unmodified lines
5659 compatible = "mediatek,mt8173-mmsys", "syscon";
5760 reg = <0x14000000 0x1000>;
5861 #clock-cells = <1>;
62+ #reset-cells = <1>;
5963 };
Documentation/devicetree/bindings/arm/qcom.yaml+23−0
@@ -25,6 +25,7 @@ description: | · 24 unmodified lines
2525 The 'SoC' element must be one of the following strings:
2626
2727 apq8016
28+ apq8026
2829 apq8074
2930 apq8084
3031 apq8096
@@ -44,6 +45,8 @@ description: | · 13 unmodified lines
4445 sdm660
4546 sdm845
4647 sdx55
48+ sdx65
49+ sm7225
4750 sm8150
4851 sm8250
4952 sm8350
@@ -94,6 +97,14 @@ properties: · 44 unmodified lines
9497
9598 - items:
9699 - enum:
100+ - lg,lenok
101+ - const: qcom,apq8026
102+
103+ - items:
104+ - enum:
105+ - asus,nexus7-flo
106+ - lg,nexus4-mako
107+ - sony,xperia-yuga
97108 - qcom,apq8064-cm-qs600
98109 - qcom,apq8064-ifc6410
99110 - const: qcom,apq8064
@@ -129,6 +140,7 @@ properties: · 29 unmodified lines
129140 - enum:
130141 - fairphone,fp2
131142 - lge,hammerhead
143+ - samsung,klte
132144 - sony,xperia-amami
133145 - sony,xperia-castor
134146 - sony,xperia-honami
@@ -163,6 +175,7 @@ properties: · 28 unmodified lines
163175
164176 - items:
165177 - enum:
178+ - qcom,ipq4019-ap-dk01.1-c1
166179 - qcom,ipq4019-ap-dk04.1-c3
167180 - qcom,ipq4019-ap-dk07.1-c1
168181 - qcom,ipq4019-ap-dk07.1-c2
@@ -206,6 +219,11 @@ properties: · 37 unmodified lines
206219 - qcom,sdx55-t55
207220 - const: qcom,sdx55
208221
222+ - items:
223+ - enum:
224+ - qcom,sdx65-mtp
225+ - const: qcom,sdx65
226+
209227 - items:
210228 - enum:
211229 - qcom,ipq6018-cp01
@@ -217,6 +235,11 @@ properties: · 5 unmodified lines
217235 - qcom,sa8155p-adp
218236 - const: qcom,sa8155p
219237
238+ - items:
239+ - enum:
240+ - fairphone,fp4
241+ - const: qcom,sm7225
242+
220243 - items:
221244 - enum:
222245 - qcom,sm8150-mtp
Documentation/devicetree/bindings/arm/renesas.yaml+61−0
@@ -255,12 +255,19 @@ properties: · 254 unmodified lines
255255 - enum:
256256 - renesas,h3ulcb
257257 - renesas,m3ulcb
258+ - renesas,m3nulcb
258259 - enum:
260+ - renesas,r8a779m0
259261 - renesas,r8a779m1
262+ - renesas,r8a779m2
260263 - renesas,r8a779m3
264+ - renesas,r8a779m4
265+ - renesas,r8a779m5
266+ - renesas,r8a779m8
261267 - enum:
262268 - renesas,r8a7795
263269 - renesas,r8a77961
270+ - renesas,r8a77965
264271
265272 - description: R-Car M3-N (R8A77965)
266273 items:
@@ -308,6 +315,14 @@ properties: · 41 unmodified lines
308315 - const: renesas,falcon-cpu
309316 - const: renesas,r8a779a0
310317
318+ - description: R-Car H3e (R8A779M0)
319+ items:
320+ - enum:
321+ - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier)
322+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
323+ - const: renesas,r8a779m0
324+ - const: renesas,r8a7795
325+
311326 - description: R-Car H3e-2G (R8A779M1)
312327 items:
313328 - enum:
@@ -316,6 +331,14 @@ properties: · 2 unmodified lines
316331 - const: renesas,r8a779m1
317332 - const: renesas,r8a7795
318333
334+ - description: R-Car M3e (R8A779M2)
335+ items:
336+ - enum:
337+ - renesas,m3ulcb # M3ULCB (R-Car Starter Kit Pro)
338+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
339+ - const: renesas,r8a779m2
340+ - const: renesas,r8a77961
341+
319342 - description: R-Car M3e-2G (R8A779M3)
320343 items:
321344 - enum:
@@ -324,6 +347,44 @@ properties: · 2 unmodified lines
324347 - const: renesas,r8a779m3
325348 - const: renesas,r8a77961
326349
350+ - description: R-Car M3Ne (R8A779M4)
351+ items:
352+ - enum:
353+ - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro)
354+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
355+ - const: renesas,r8a779m4
356+ - const: renesas,r8a77965
357+
358+ - description: R-Car M3Ne-2G (R8A779M5)
359+ items:
360+ - enum:
361+ - renesas,m3nulcb # M3NULCB (R-Car Starter Kit Pro)
362+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
363+ - const: renesas,r8a779m5
364+ - const: renesas,r8a77965
365+
366+ - description: R-Car E3e (R8A779M6)
367+ items:
368+ - enum:
369+ - renesas,ebisu # Ebisu
370+ - const: renesas,r8a779m6
371+ - const: renesas,r8a77990
372+
373+ - description: R-Car D3e (R8A779M7)
374+ items:
375+ - enum:
376+ - renesas,draak # Draak
377+ - const: renesas,r8a779m7
378+ - const: renesas,r8a77995
379+
380+ - description: R-Car H3Ne (R8A779M8)
381+ items:
382+ - enum:
383+ - renesas,h3ulcb # H3ULCB (R-Car Starter Kit Premier)
384+ - renesas,salvator-xs # Salvator-XS (Salvator-X 2nd version)
385+ - const: renesas,r8a779m8
386+ - const: renesas,r8a7795
387+
327388 - description: RZ/N1D (R9A06G032)
328389 items:
329390 - enum:
Documentation/devicetree/bindings/arm/rockchip.yaml+47−1
@@ -115,6 +115,11 @@ properties: · 114 unmodified lines
115115 - const: firefly,roc-rk3328-cc
116116 - const: rockchip,rk3328
117117
118+ - description: Firefly ROC-RK3328-PC
119+ items:
120+ - const: firefly,roc-rk3328-pc
121+ - const: rockchip,rk3328
122+
118123 - description: Firefly ROC-RK3399-PC
119124 items:
120125 - enum:
@@ -122,6 +127,12 @@ properties: · 1 unmodified line
122127 - firefly,roc-rk3399-pc-mezzanine
123128 - const: rockchip,rk3399
124129
130+ - description: Firefly ROC-RK3399-PC-PLUS
131+ items:
132+ - enum:
133+ - firefly,roc-rk3399-pc-plus
134+ - const: rockchip,rk3399
135+
125136 - description: FriendlyElec NanoPi R2S
126137 items:
127138 - const: friendlyarm,nanopi-r2s
@@ -287,6 +298,34 @@ properties: · 159 unmodified lines
287298 - const: google,veyron
288299 - const: rockchip,rk3288
289300
301+ - description: Google Scarlet - Dumo (ASUS Chromebook Tablet CT100)
302+ items:
303+ - const: google,scarlet-rev15-sku0
304+ - const: google,scarlet-rev15
305+ - const: google,scarlet-rev14-sku0
306+ - const: google,scarlet-rev14
307+ - const: google,scarlet-rev13-sku0
308+ - const: google,scarlet-rev13
309+ - const: google,scarlet-rev12-sku0
310+ - const: google,scarlet-rev12
311+ - const: google,scarlet-rev11-sku0
312+ - const: google,scarlet-rev11
313+ - const: google,scarlet-rev10-sku0
314+ - const: google,scarlet-rev10
315+ - const: google,scarlet-rev9-sku0
316+ - const: google,scarlet-rev9
317+ - const: google,scarlet-rev8-sku0
318+ - const: google,scarlet-rev8
319+ - const: google,scarlet-rev7-sku0
320+ - const: google,scarlet-rev7
321+ - const: google,scarlet-rev6-sku0
322+ - const: google,scarlet-rev6
323+ - const: google,scarlet-rev5-sku0
324+ - const: google,scarlet-rev5
325+ - const: google,scarlet
326+ - const: google,gru
327+ - const: rockchip,rk3399
328+
290329 - description: Google Scarlet - Kingdisplay (Acer Chromebook Tab 10)
291330 items:
292331 - const: google,scarlet-rev15-sku7
@@ -455,16 +494,23 @@ properties: · 162 unmodified lines
455494 - const: pine64,rockpro64
456495 - const: rockchip,rk3399
457496
497+ - description: Pine64 Quartz64 Model A
498+ items:
499+ - const: pine64,quartz64-a
500+ - const: rockchip,rk3566
501+
458502 - description: Radxa Rock
459503 items:
460504 - const: radxa,rock
461505 - const: rockchip,rk3188
462506
463− - description: Radxa ROCK Pi 4A/B/C
507+ - description: Radxa ROCK Pi 4A/A+/B/B+/C
464508 items:
465509 - enum:
466510 - radxa,rockpi4a
511+ - radxa,rockpi4a-plus
467512 - radxa,rockpi4b
513+ - radxa,rockpi4b-plus
468514 - radxa,rockpi4c
469515 - const: radxa,rockpi4
470516 - const: rockchip,rk3399
Documentation/devicetree/bindings/arm/rockchip/pmu.yaml+4−0
@@ -22,7 +22,9 @@ select: · 21 unmodified lines
2222 - rockchip,px30-pmu
2323 - rockchip,rk3066-pmu
2424 - rockchip,rk3288-pmu
25+ - rockchip,rk3368-pmu
2526 - rockchip,rk3399-pmu
27+ - rockchip,rk3568-pmu
2628
2729 required:
2830 - compatible
@@ -34,7 +36,9 @@ properties: · 5 unmodified lines
3436 - rockchip,px30-pmu
3537 - rockchip,rk3066-pmu
3638 - rockchip,rk3288-pmu
39+ - rockchip,rk3368-pmu
3740 - rockchip,rk3399-pmu
41+ - rockchip,rk3568-pmu
3842 - const: syscon
3943 - const: simple-mfd
4044
Documentation/devicetree/bindings/arm/samsung/samsung-boards.yaml+6−0
@@ -199,6 +199,12 @@ properties: · 198 unmodified lines
199199 - samsung,exynos7-espresso # Samsung Exynos7 Espresso
200200 - const: samsung,exynos7
201201
202+ - description: Exynos Auto v9 based boards
203+ items:
204+ - enum:
205+ - samsung,exynosautov9-sadk # Samsung Exynos Auto v9 SADK
206+ - const: samsung,exynosautov9
207+
202208 required:
203209 - compatible
204210
Documentation/devicetree/bindings/arm/sprd/sprd.yaml+5−0
@@ -30,6 +30,11 @@ properties: · 29 unmodified lines
3030 - sprd,sp9863a-1h10
3131 - const: sprd,sc9863a
3232
33+ - items:
34+ - enum:
35+ - sprd,ums512-1h10
36+ - const: sprd,ums512
37+
3338 additionalProperties: true
3439
3540 ...
Documentation/devicetree/bindings/arm/stm32/stm32.yaml+4−0
@@ -55,6 +55,10 @@ properties: · 54 unmodified lines
5555 - enum:
5656 - st,stm32h750i-art-pi
5757 - const: st,stm32h750
58+ - items:
59+ - enum:
60+ - st,stm32mp135f-dk
61+ - const: st,stm32mp135
5862 - items:
5963 - enum:
6064 - shiratech,stm32mp157a-iot-box # IoT Box
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml+1−0
@@ -30,6 +30,7 @@ properties: · 29 unmodified lines
3030 enum:
3131 - allwinner,sun5i-a13-mbus
3232 - allwinner,sun8i-h3-mbus
33+ - allwinner,sun8i-r40-mbus
3334 - allwinner,sun50i-a64-mbus
3435
3536 reg:
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml+38−0
@@ -0,0 +1,38 @@
1+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: Allwinner CPU Configuration Controller Device Tree Bindings
8+
9+maintainers:
10+ - Chen-Yu Tsai <wens@csie.org>
11+ - Maxime Ripard <mripard@kernel.org>
12+
13+properties:
14+ compatible:
15+ enum:
16+ - allwinner,sun6i-a31-cpuconfig
17+ - allwinner,sun8i-a23-cpuconfig
18+ - allwinner,sun8i-a83t-cpucfg
19+ - allwinner,sun8i-a83t-r-cpucfg
20+ - allwinner,sun9i-a80-cpucfg
21+
22+ reg:
23+ maxItems: 1
24+
25+required:
26+ - compatible
27+ - reg
28+
29+additionalProperties: false
30+
31+examples:
32+ - |
33+ cpucfg@1f01c00 {
34+ compatible = "allwinner,sun6i-a31-cpuconfig";
35+ reg = <0x01f01c00 0x300>;
36+ };
37+
38+...
Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml+33−0
@@ -0,0 +1,33 @@
1+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/arm/sunxi/allwinner,sun9i-a80-prcm.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: Allwinner A80 PRCM Device Tree Bindings
8+
9+maintainers:
10+ - Chen-Yu Tsai <wens@csie.org>
11+ - Maxime Ripard <mripard@kernel.org>
12+
13+properties:
14+ compatible:
15+ const: allwinner,sun9i-a80-prcm
16+
17+ reg:
18+ maxItems: 1
19+
20+required:
21+ - compatible
22+ - reg
23+
24+additionalProperties: false
25+
26+examples:
27+ - |
28+ prcm@8001400 {
29+ compatible = "allwinner,sun9i-a80-prcm";
30+ reg = <0x08001400 0x200>;
31+ };
32+
33+...
Documentation/devicetree/bindings/arm/ti/k3.yaml+13−2
@@ -24,16 +24,27 @@ properties: · 23 unmodified lines
2424 - enum:
2525 - ti,am654-evm
2626 - siemens,iot2050-basic
27+ - siemens,iot2050-basic-pg2
2728 - siemens,iot2050-advanced
29+ - siemens,iot2050-advanced-pg2
2830 - const: ti,am654
2931
3032 - description: K3 J721E SoC
31− items:
33+ oneOf:
3234 - const: ti,j721e
35+ - items:
36+ - enum:
37+ - ti,j721e-evm
38+ - ti,j721e-sk
39+ - const: ti,j721e
3340
3441 - description: K3 J7200 SoC
35− items:
42+ oneOf:
3643 - const: ti,j7200
44+ - items:
45+ - enum:
46+ - ti,j7200-evm
47+ - const: ti,j7200
3748
3849 - description: K3 AM642 SoC
3950 items:
Documentation/devicetree/bindings/arm/toshiba.yaml+1−0
@@ -18,6 +18,7 @@ properties: · 17 unmodified lines
1818 items:
1919 - enum:
2020 - toshiba,tmpv7708-rm-mbrc # TMPV7708 RM main board
21+ - toshiba,tmpv7708-visrobo-vrb # TMPV7708 VisROBO VRB board
2122 - const: toshiba,tmpv7708
2223
2324 additionalProperties: true
Documentation/devicetree/bindings/arm/xilinx.yaml+17−0
@@ -87,6 +87,7 @@ properties: · 86 unmodified lines
8787 - xlnx,zynqmp-zcu102-revA
8888 - xlnx,zynqmp-zcu102-revB
8989 - xlnx,zynqmp-zcu102-rev1.0
90+ - xlnx,zynqmp-zcu102-rev1.1
9091 - const: xlnx,zynqmp-zcu102
9192 - const: xlnx,zynqmp
9293
@@ -115,6 +116,22 @@ properties: · 22 unmodified lines
115116 - const: xlnx,zynqmp-zcu111
116117 - const: xlnx,zynqmp
117118
119+ - description: Xilinx Kria SOMs
120+ items:
121+ - const: xlnx,zynqmp-sm-k26-rev1
122+ - const: xlnx,zynqmp-sm-k26-revB
123+ - const: xlnx,zynqmp-sm-k26-revA
124+ - const: xlnx,zynqmp-sm-k26
125+ - const: xlnx,zynqmp
126+
127+ - description: Xilinx Kria SOMs (starter)
128+ items:
129+ - const: xlnx,zynqmp-smk-k26-rev1
130+ - const: xlnx,zynqmp-smk-k26-revB
131+ - const: xlnx,zynqmp-smk-k26-revA
132+ - const: xlnx,zynqmp-smk-k26
133+ - const: xlnx,zynqmp
134+
118135 additionalProperties: true
119136
120137 ...
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml+3−0
@@ -47,6 +47,9 @@ properties: · 46 unmodified lines
4747 interrupts:
4848 maxItems: 1
4949
50+ power-domains:
51+ maxItems: 1
52+
5053 required:
5154 - "#clock-cells"
5255 - compatible
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml+3−0
@@ -51,6 +51,9 @@ properties: · 50 unmodified lines
5151 dma-names:
5252 const: audio-rx
5353
54+ power-domains:
55+ maxItems: 1
56+
5457 required:
5558 - compatible
5659 - reg
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml+3−0
@@ -24,6 +24,9 @@ properties: · 23 unmodified lines
2424 interrupts:
2525 maxItems: 1
2626
27+ power-domains:
28+ maxItems: 1
29+
2730 required:
2831 - compatible
2932 - reg
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml+3−0
@@ -24,6 +24,9 @@ properties: · 23 unmodified lines
2424 interrupts:
2525 maxItems: 1
2626
27+ power-domains:
28+ maxItems: 1
29+
2730 required:
2831 - compatible
2932 - reg
Documentation/devicetree/bindings/display/mediatek/mediatek,dsi.txt+6−0
@@ -19,6 +19,11 @@ Required properties: · 18 unmodified lines
1919 Documentation/devicetree/bindings/graph.txt. This port should be connected
2020 to the input port of an attached DSI panel or DSI-to-eDP encoder chip.
2121
22+Optional properties:
23+- resets: list of phandle + reset specifier pair, as described in [1].
24+
25+[1] Documentation/devicetree/bindings/reset/reset.txt
26+
2227 MIPI TX Configuration Module
2328 ============================
2429
@@ -45,6 +50,7 @@ dsi0: dsi@1401b000 { · 20 unmodified lines
4550 clocks = <&mmsys MM_DSI0_ENGINE>, <&mmsys MM_DSI0_DIGITAL>,
4651 <&mipi_tx0>;
4752 clock-names = "engine", "digital", "hs";
53+ resets = <&mmsys MT8173_MMSYS_SW0_RST_B_DISP_DSI0>;
4854 phys = <&mipi_tx0>;
4955 phy-names = "dphy";
5056
Documentation/devicetree/bindings/gpu/host1x/nvidia,tegra210-nvdec.yaml+106−0
@@ -0,0 +1,106 @@
1+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: "http://devicetree.org/schemas/gpu/host1x/nvidia,tegra210-nvdec.yaml#"
5+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
6+
7+title: Device tree binding for NVIDIA Tegra NVDEC
8+
9+description: |
10+ NVDEC is the hardware video decoder present on NVIDIA Tegra210
11+ and newer chips. It is located on the Host1x bus and typically
12+ programmed through Host1x channels.
13+
14+maintainers:
15+ - Thierry Reding <treding@gmail.com>
16+ - Mikko Perttunen <mperttunen@nvidia.com>
17+
18+properties:
19+ $nodename:
20+ pattern: "^nvdec@[0-9a-f]*$"
21+
22+ compatible:
23+ enum:
24+ - nvidia,tegra210-nvdec
25+ - nvidia,tegra186-nvdec
26+ - nvidia,tegra194-nvdec
27+
28+ reg:
29+ maxItems: 1
30+
31+ clocks:
32+ maxItems: 1
33+
34+ clock-names:
35+ items:
36+ - const: nvdec
37+
38+ resets:
39+ maxItems: 1
40+
41+ reset-names:
42+ items:
43+ - const: nvdec
44+
45+ power-domains:
46+ maxItems: 1
47+
48+ iommus:
49+ maxItems: 1
50+
51+ dma-coherent: true
52+
53+ interconnects:
54+ items:
55+ - description: DMA read memory client
56+ - description: DMA read 2 memory client
57+ - description: DMA write memory client
58+
59+ interconnect-names:
60+ items:
61+ - const: dma-mem
62+ - const: read-1
63+ - const: write
64+
65+ nvidia,host1x-class:
66+ description: |
67+ Host1x class of the engine, used to specify the targeted engine
68+ when programming the engine through Host1x channels or when
69+ configuring engine-specific behavior in Host1x.
70+ default: 0xf0
71+ $ref: /schemas/types.yaml#/definitions/uint32
72+
73+required:
74+ - compatible
75+ - reg
76+ - clocks
77+ - clock-names
78+ - resets
79+ - reset-names
80+ - power-domains
81+
82+additionalProperties: false
83+
84+examples:
85+ - |
86+ #include <dt-bindings/clock/tegra186-clock.h>
87+ #include <dt-bindings/interrupt-controller/arm-gic.h>
88+ #include <dt-bindings/memory/tegra186-mc.h>
89+ #include <dt-bindings/power/tegra186-powergate.h>
90+ #include <dt-bindings/reset/tegra186-reset.h>
91+
92+ nvdec@15480000 {
93+ compatible = "nvidia,tegra186-nvdec";
94+ reg = <0x15480000 0x40000>;
95+ clocks = <&bpmp TEGRA186_CLK_NVDEC>;
96+ clock-names = "nvdec";
97+ resets = <&bpmp TEGRA186_RESET_NVDEC>;
98+ reset-names = "nvdec";
99+
100+ power-domains = <&bpmp TEGRA186_POWER_DOMAIN_NVDEC>;
101+ interconnects = <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD &emc>,
102+ <&mc TEGRA186_MEMORY_CLIENT_NVDECSRD1 &emc>,
103+ <&mc TEGRA186_MEMORY_CLIENT_NVDECSWR &emc>;
104+ interconnect-names = "dma-mem", "read-1", "write";
105+ iommus = <&smmu TEGRA186_SID_NVDEC>;
106+ };
Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt+0−157
@@ -1,157 +0,0 @@
1−Device tree bindings for OMAP general purpose memory controllers (GPMC)
2−
3−The actual devices are instantiated from the child nodes of a GPMC node.
4−
5−Required properties:
6−
7− - compatible: Should be set to one of the following:
8−
9− ti,omap2420-gpmc (omap2420)
10− ti,omap2430-gpmc (omap2430)
11− ti,omap3430-gpmc (omap3430 & omap3630)
12− ti,omap4430-gpmc (omap4430 & omap4460 & omap543x)
13− ti,am3352-gpmc (am335x devices)
14−
15− - reg: A resource specifier for the register space
16− (see the example below)
17− - ti,hwmods: Should be set to "ti,gpmc" until the DT transition is
18− completed.
19− - #address-cells: Must be set to 2 to allow memory address translation
20− - #size-cells: Must be set to 1 to allow CS address passing
21− - gpmc,num-cs: The maximum number of chip-select lines that controller
22− can support.
23− - gpmc,num-waitpins: The maximum number of wait pins that controller can
24− support.
25− - ranges: Must be set up to reflect the memory layout with four
26− integer values for each chip-select line in use:
27−
28− <cs-number> 0 <physical address of mapping> <size>
29−
30− Currently, calculated values derived from the contents
31− of the per-CS register GPMC_CONFIG7 (as set up by the
32− bootloader) are used for the physical address decoding.
33− As this will change in the future, filling correct
34− values here is a requirement.
35− - interrupt-controller: The GPMC driver implements and interrupt controller for
36− the NAND events "fifoevent" and "termcount" plus the
37− rising/falling edges on the GPMC_WAIT pins.
38− The interrupt number mapping is as follows
39− 0 - NAND_fifoevent
40− 1 - NAND_termcount
41− 2 - GPMC_WAIT0 pin edge
42− 3 - GPMC_WAIT1 pin edge, and so on.
43− - interrupt-cells: Must be set to 2
44− - gpio-controller: The GPMC driver implements a GPIO controller for the
45− GPMC WAIT pins that can be used as general purpose inputs.
46− 0 maps to GPMC_WAIT0 pin.
47− - gpio-cells: Must be set to 2
48−
49−Required properties when using NAND prefetch dma:
50− - dmas GPMC NAND prefetch dma channel
51− - dma-names Must be set to "rxtx"
52−
53−Timing properties for child nodes. All are optional and default to 0.
54−
55− - gpmc,sync-clk-ps: Minimum clock period for synchronous mode, in picoseconds
56−
57− Chip-select signal timings (in nanoseconds) corresponding to GPMC_CONFIG2:
58− - gpmc,cs-on-ns: Assertion time
59− - gpmc,cs-rd-off-ns: Read deassertion time
60− - gpmc,cs-wr-off-ns: Write deassertion time
61−
62− ADV signal timings (in nanoseconds) corresponding to GPMC_CONFIG3:
63− - gpmc,adv-on-ns: Assertion time
64− - gpmc,adv-rd-off-ns: Read deassertion time
65− - gpmc,adv-wr-off-ns: Write deassertion time
66− - gpmc,adv-aad-mux-on-ns: Assertion time for AAD
67− - gpmc,adv-aad-mux-rd-off-ns: Read deassertion time for AAD
68− - gpmc,adv-aad-mux-wr-off-ns: Write deassertion time for AAD
69−
70− WE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
71− - gpmc,we-on-ns Assertion time
72− - gpmc,we-off-ns: Deassertion time
73−
74− OE signals timings (in nanoseconds) corresponding to GPMC_CONFIG4:
75− - gpmc,oe-on-ns: Assertion time
76− - gpmc,oe-off-ns: Deassertion time
77− - gpmc,oe-aad-mux-on-ns: Assertion time for AAD
78− - gpmc,oe-aad-mux-off-ns: Deassertion time for AAD
79−
80− Access time and cycle time timings (in nanoseconds) corresponding to
81− GPMC_CONFIG5:
82− - gpmc,page-burst-access-ns: Multiple access word delay
83− - gpmc,access-ns: Start-cycle to first data valid delay
84− - gpmc,rd-cycle-ns: Total read cycle time
85− - gpmc,wr-cycle-ns: Total write cycle time
86− - gpmc,bus-turnaround-ns: Turn-around time between successive accesses
87− - gpmc,cycle2cycle-delay-ns: Delay between chip-select pulses
88− - gpmc,clk-activation-ns: GPMC clock activation time
89− - gpmc,wait-monitoring-ns: Start of wait monitoring with regard to valid
90− data
91−
92−Boolean timing parameters. If property is present parameter enabled and
93−disabled if omitted:
94− - gpmc,adv-extra-delay: ADV signal is delayed by half GPMC clock
95− - gpmc,cs-extra-delay: CS signal is delayed by half GPMC clock
96− - gpmc,cycle2cycle-diffcsen: Add "cycle2cycle-delay" between successive
97− accesses to a different CS
98− - gpmc,cycle2cycle-samecsen: Add "cycle2cycle-delay" between successive
99− accesses to the same CS
100− - gpmc,oe-extra-delay: OE signal is delayed by half GPMC clock
101− - gpmc,we-extra-delay: WE signal is delayed by half GPMC clock
102− - gpmc,time-para-granularity: Multiply all access times by 2
103−
104−The following are only applicable to OMAP3+ and AM335x:
105− - gpmc,wr-access-ns: In synchronous write mode, for single or
106− burst accesses, defines the number of
107− GPMC_FCLK cycles from start access time
108− to the GPMC_CLK rising edge used by the
109− memory device for the first data capture.
110− - gpmc,wr-data-mux-bus-ns: In address-data multiplex mode, specifies
111− the time when the first data is driven on
112− the address-data bus.
113−
114−GPMC chip-select settings properties for child nodes. All are optional.
115−
116−- gpmc,burst-length Page/burst length. Must be 4, 8 or 16.
117−- gpmc,burst-wrap Enables wrap bursting
118−- gpmc,burst-read Enables read page/burst mode
119−- gpmc,burst-write Enables write page/burst mode
120−- gpmc,device-width Total width of device(s) connected to a GPMC
121− chip-select in bytes. The GPMC supports 8-bit
122− and 16-bit devices and so this property must be
123− 1 or 2.
124−- gpmc,mux-add-data Address and data multiplexing configuration.
125− Valid values are 1 for address-address-data
126− multiplexing mode and 2 for address-data
127− multiplexing mode.
128−- gpmc,sync-read Enables synchronous read. Defaults to asynchronous
129− is this is not set.
130−- gpmc,sync-write Enables synchronous writes. Defaults to asynchronous
131− is this is not set.
132−- gpmc,wait-pin Wait-pin used by client. Must be less than
133− "gpmc,num-waitpins".
134−- gpmc,wait-on-read Enables wait monitoring on reads.
135−- gpmc,wait-on-write Enables wait monitoring on writes.
136−
137−Example for an AM33xx board:
138−
139− gpmc: gpmc@50000000 {
140− compatible = "ti,am3352-gpmc";
141− ti,hwmods = "gpmc";
142− reg = <0x50000000 0x2000>;
143− interrupts = <100>;
144− dmas = <&edma 52 0>;
145− dma-names = "rxtx";
146− gpmc,num-cs = <8>;
147− gpmc,num-waitpins = <2>;
148− #address-cells = <2>;
149− #size-cells = <1>;
150− ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
151− interrupt-controller;
152− #interrupt-cells = <2>;
153− gpio-controller;
154− #gpio-cells = <2>;
155−
156− /* child nodes go here */
157− };
Documentation/devicetree/bindings/memory-controllers/ti,gpmc-child.yaml+245−0
@@ -0,0 +1,245 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc-child.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: device tree bindings for children of the Texas Instruments GPMC
8+
9+maintainers:
10+ - Tony Lindgren <tony@atomide.com>
11+ - Roger Quadros <rogerq@kernel.org>
12+
13+description:
14+ This binding is meant for the child nodes of the GPMC node. The node
15+ represents any device connected to the GPMC bus. It may be a Flash chip,
16+ RAM chip or Ethernet controller, etc. These properties are meant for
17+ configuring the GPMC settings/timings and will accompany the bindings
18+ supported by the respective device.
19+
20+properties:
21+ reg: true
22+
23+# GPMC Timing properties for child nodes. All are optional and default to 0.
24+ gpmc,sync-clk-ps:
25+ description: Minimum clock period for synchronous mode
26+ default: 0
27+
28+# Chip-select signal timings corresponding to GPMC_CONFIG2:
29+ gpmc,cs-on-ns:
30+ description: Assertion time
31+ default: 0
32+
33+ gpmc,cs-rd-off-ns:
34+ description: Read deassertion time
35+ default: 0
36+
37+ gpmc,cs-wr-off-ns:
38+ description: Write deassertion time
39+ default: 0
40+
41+# ADV signal timings corresponding to GPMC_CONFIG3:
42+ gpmc,adv-on-ns:
43+ description: Assertion time
44+ default: 0
45+
46+ gpmc,adv-rd-off-ns:
47+ description: Read deassertion time
48+ default: 0
49+
50+ gpmc,adv-wr-off-ns:
51+ description: Write deassertion time
52+ default: 0
53+
54+ gpmc,adv-aad-mux-on-ns:
55+ description: Assertion time for AAD
56+ default: 0
57+
58+ gpmc,adv-aad-mux-rd-off-ns:
59+ description: Read deassertion time for AAD
60+ default: 0
61+
62+ gpmc,adv-aad-mux-wr-off-ns:
63+ description: Write deassertion time for AAD
64+ default: 0
65+
66+# WE signals timings corresponding to GPMC_CONFIG4:
67+ gpmc,we-on-ns:
68+ description: Assertion time
69+ default: 0
70+
71+ gpmc,we-off-ns:
72+ description: Deassertion time
73+ default: 0
74+
75+# OE signals timings corresponding to GPMC_CONFIG4:
76+ gpmc,oe-on-ns:
77+ description: Assertion time
78+ default: 0
79+
80+ gpmc,oe-off-ns:
81+ description: Deassertion time
82+ default: 0
83+
84+ gpmc,oe-aad-mux-on-ns:
85+ description: Assertion time for AAD
86+ default: 0
87+
88+ gpmc,oe-aad-mux-off-ns:
89+ description: Deassertion time for AAD
90+ default: 0
91+
92+# Access time and cycle time timings (in nanoseconds) corresponding to
93+# GPMC_CONFIG5:
94+ gpmc,page-burst-access-ns:
95+ description: Multiple access word delay
96+ default: 0
97+
98+ gpmc,access-ns:
99+ description: Start-cycle to first data valid delay
100+ default: 0
101+
102+ gpmc,rd-cycle-ns:
103+ description: Total read cycle time
104+ default: 0
105+
106+ gpmc,wr-cycle-ns:
107+ description: Total write cycle time
108+ default: 0
109+
110+ gpmc,bus-turnaround-ns:
111+ description: Turn-around time between successive accesses
112+ default: 0
113+
114+ gpmc,cycle2cycle-delay-ns:
115+ description: Delay between chip-select pulses
116+ default: 0
117+
118+ gpmc,clk-activation-ns:
119+ description: GPMC clock activation time
120+ default: 0
121+
122+ gpmc,wait-monitoring-ns:
123+ description: Start of wait monitoring with regard to valid data
124+ default: 0
125+
126+# Boolean timing parameters. If property is present, parameter is enabled
127+# otherwise disabled.
128+ gpmc,adv-extra-delay:
129+ description: ADV signal is delayed by half GPMC clock
130+ type: boolean
131+
132+ gpmc,cs-extra-delay:
133+ description: CS signal is delayed by half GPMC clock
134+ type: boolean
135+
136+ gpmc,cycle2cycle-diffcsen:
137+ description: |
138+ Add "cycle2cycle-delay" between successive accesses
139+ to a different CS
140+ type: boolean
141+
142+ gpmc,cycle2cycle-samecsen:
143+ description: |
144+ Add "cycle2cycle-delay" between successive accesses
145+ to the same CS
146+ type: boolean
147+
148+ gpmc,oe-extra-delay:
149+ description: OE signal is delayed by half GPMC clock
150+ type: boolean
151+
152+ gpmc,we-extra-delay:
153+ description: WE signal is delayed by half GPMC clock
154+ type: boolean
155+
156+ gpmc,time-para-granularity:
157+ description: Multiply all access times by 2
158+ type: boolean
159+
160+# The following two properties are applicable only to OMAP3+ and AM335x:
161+ gpmc,wr-access-ns:
162+ description: |
163+ In synchronous write mode, for single or
164+ burst accesses, defines the number of
165+ GPMC_FCLK cycles from start access time
166+ to the GPMC_CLK rising edge used by the
167+ memory device for the first data capture.
168+ default: 0
169+
170+ gpmc,wr-data-mux-bus-ns:
171+ description: |
172+ In address-data multiplex mode, specifies
173+ the time when the first data is driven on
174+ the address-data bus.
175+ default: 0
176+
177+# GPMC chip-select settings properties for child nodes. All are optional.
178+ gpmc,burst-length:
179+ description: Page/burst length.
180+ $ref: /schemas/types.yaml#/definitions/uint32
181+ enum: [0, 4, 8, 16]
182+ default: 0
183+
184+ gpmc,burst-wrap:
185+ description: Enables wrap bursting
186+ type: boolean
187+
188+ gpmc,burst-read:
189+ description: Enables read page/burst mode
190+ type: boolean
191+
192+ gpmc,burst-write:
193+ description: Enables write page/burst mode
194+ type: boolean
195+
196+ gpmc,device-width:
197+ description: |
198+ Total width of device(s) connected to a GPMC
199+ chip-select in bytes. The GPMC supports 8-bit
200+ and 16-bit devices and so this property must be
201+ 1 or 2.
202+ $ref: /schemas/types.yaml#/definitions/uint32
203+ enum: [1, 2]
204+ default: 1
205+
206+ gpmc,mux-add-data:
207+ description: |
208+ Address and data multiplexing configuration.
209+ Valid values are
210+ 0 for Non multiplexed mode
211+ 1 for address-address-data multiplexing mode and
212+ 2 for address-data multiplexing mode.
213+ $ref: /schemas/types.yaml#/definitions/uint32
214+ enum: [0, 1, 2]
215+
216+ gpmc,sync-read:
217+ description: |
218+ Enables synchronous read. Defaults to asynchronous
219+ is this is not set.
220+ type: boolean
221+
222+ gpmc,sync-write:
223+ description: |
224+ Enables synchronous writes. Defaults to asynchronous
225+ is this is not set.
226+ type: boolean
227+
228+ gpmc,wait-pin:
229+ description: |
230+ Wait-pin used by client. Must be less than "gpmc,num-waitpins".
231+ $ref: /schemas/types.yaml#/definitions/uint32
232+
233+ gpmc,wait-on-read:
234+ description: Enables wait monitoring on reads.
235+ type: boolean
236+
237+ gpmc,wait-on-write:
238+ description: Enables wait monitoring on writes.
239+ type: boolean
240+
241+required:
242+ - reg
243+
244+# the GPMC child will have its own native properties
245+additionalProperties: true
Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml+172−0
@@ -0,0 +1,172 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/memory-controllers/ti,gpmc.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: Texas Instruments GPMC Memory Controller device-tree bindings
8+
9+maintainers:
10+ - Tony Lindgren <tony@atomide.com>
11+ - Roger Quadros <rogerq@kernel.org>
12+
13+description:
14+ The GPMC is a unified memory controller dedicated for interfacing
15+ with external memory devices like
16+ - Asynchronous SRAM-like memories and ASICs
17+ - Asynchronous, synchronous, and page mode burst NOR flash
18+ - NAND flash
19+ - Pseudo-SRAM devices
20+
21+properties:
22+ compatible:
23+ items:
24+ - enum:
25+ - ti,am3352-gpmc
26+ - ti,omap2420-gpmc
27+ - ti,omap2430-gpmc
28+ - ti,omap3430-gpmc
29+ - ti,omap4430-gpmc
30+
31+ reg:
32+ maxItems: 1
33+
34+ interrupts:
35+ maxItems: 1
36+
37+ clocks:
38+ maxItems: 1
39+ description: |
40+ Functional clock. Used for bus timing calculations and
41+ GPMC configuration.
42+
43+ clock-names:
44+ items:
45+ - const: fck
46+
47+ dmas:
48+ items:
49+ - description: DMA channel for GPMC NAND prefetch
50+
51+ dma-names:
52+ items:
53+ - const: rxtx
54+
55+ "#address-cells": true
56+
57+ "#size-cells": true
58+
59+ gpmc,num-cs:
60+ description: maximum number of supported chip-select lines.
61+ $ref: /schemas/types.yaml#/definitions/uint32
62+
63+ gpmc,num-waitpins:
64+ description: maximum number of supported wait pins.
65+ $ref: /schemas/types.yaml#/definitions/uint32
66+
67+ ranges:
68+ minItems: 1
69+ description: |
70+ Must be set up to reflect the memory layout with four
71+ integer values for each chip-select line in use,
72+ <cs-number> 0 <physical address of mapping> <size>
73+ items:
74+ - description: NAND bank 0
75+ - description: NOR/SRAM bank 0
76+ - description: NOR/SRAM bank 1
77+
78+ '#interrupt-cells':
79+ const: 2
80+
81+ interrupt-controller:
82+ description: |
83+ The GPMC driver implements and interrupt controller for
84+ the NAND events "fifoevent" and "termcount" plus the
85+ rising/falling edges on the GPMC_WAIT pins.
86+ The interrupt number mapping is as follows
87+ 0 - NAND_fifoevent
88+ 1 - NAND_termcount
89+ 2 - GPMC_WAIT0 pin edge
90+ 3 - GPMC_WAIT1 pin edge, and so on.
91+
92+ '#gpio-cells':
93+ const: 2
94+
95+ gpio-controller:
96+ description: |
97+ The GPMC driver implements a GPIO controller for the
98+ GPMC WAIT pins that can be used as general purpose inputs.
99+ 0 maps to GPMC_WAIT0 pin.
100+
101+ ti,hwmods:
102+ description:
103+ Name of the HWMOD associated with GPMC. This is for legacy
104+ omap2/3 platforms only.
105+ $ref: /schemas/types.yaml#/definitions/string
106+ deprecated: true
107+
108+ ti,no-idle-on-init:
109+ description:
110+ Prevent idling the module at init. This is for legacy omap2/3
111+ platforms only.
112+ type: boolean
113+ deprecated: true
114+
115+patternProperties:
116+ "@[0-7],[a-f0-9]+$":
117+ type: object
118+ description: |
119+ The child device node represents the device connected to the GPMC
120+ bus. The device can be a NAND chip, SRAM device, NOR device
121+ or an ASIC.
122+
123+ allOf:
124+ - $ref: "ti,gpmc-child.yaml"
125+
126+ unevaluatedProperties: false
127+
128+required:
129+ - compatible
130+ - reg
131+ - gpmc,num-cs
132+ - gpmc,num-waitpins
133+ - "#address-cells"
134+ - "#size-cells"
135+
136+additionalProperties: false
137+
138+examples:
139+ - |
140+ #include <dt-bindings/interrupt-controller/arm-gic.h>
141+ #include <dt-bindings/gpio/gpio.h>
142+
143+ gpmc: memory-controller@50000000 {
144+ compatible = "ti,am3352-gpmc";
145+ reg = <0x50000000 0x2000>;
146+ interrupts = <100>;
147+ clocks = <&l3s_clkctrl>;
148+ clock-names = "fck";
149+ dmas = <&edma 52 0>;
150+ dma-names = "rxtx";
151+ gpmc,num-cs = <8>;
152+ gpmc,num-waitpins = <2>;
153+ #address-cells = <2>;
154+ #size-cells = <1>;
155+ ranges = <0 0 0x08000000 0x10000000>; /* CS0 @addr 0x8000000, size 0x10000000 */
156+ interrupt-controller;
157+ #interrupt-cells = <2>;
158+ gpio-controller;
159+ #gpio-cells = <2>;
160+
161+ nand@0,0 {
162+ compatible = "ti,omap2-nand";
163+ reg = <0 0 4>;
164+ interrupt-parent = <&gpmc>;
165+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
166+ <1 IRQ_TYPE_NONE>; /* termcount */
167+ ti,nand-xfer-type = "prefetch-dma";
168+ ti,nand-ecc-opt = "bch16";
169+ ti,elm-id = <&elm>;
170+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
171+ };
172+ };
Documentation/devicetree/bindings/mtd/gpmc-nand.txt+0−147
@@ -1,147 +0,0 @@
1−Device tree bindings for GPMC connected NANDs
2−
3−GPMC connected NAND (found on OMAP boards) are represented as child nodes of
4−the GPMC controller with a name of "nand".
5−
6−All timing relevant properties as well as generic gpmc child properties are
7−explained in a separate documents - please refer to
8−Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9−
10−For NAND specific properties such as ECC modes or bus width, please refer to
11−Documentation/devicetree/bindings/mtd/nand-controller.yaml
12−
13−
14−Required properties:
15−
16− - compatible: "ti,omap2-nand"
17− - reg: range id (CS number), base offset and length of the
18− NAND I/O space
19− - interrupts: Two interrupt specifiers, one for fifoevent, one for termcount.
20−
21−Optional properties:
22−
23− - nand-bus-width: Set this numeric value to 16 if the hardware
24− is wired that way. If not specified, a bus
25− width of 8 is assumed.
26−
27− - ti,nand-ecc-opt: A string setting the ECC layout to use. One of:
28− "sw" 1-bit Hamming ecc code via software
29− "hw" <deprecated> use "ham1" instead
30− "hw-romcode" <deprecated> use "ham1" instead
31− "ham1" 1-bit Hamming ecc code
32− "bch4" 4-bit BCH ecc code
33− "bch8" 8-bit BCH ecc code
34− "bch16" 16-bit BCH ECC code
35− Refer below "How to select correct ECC scheme for your device ?"
36−
37− - ti,nand-xfer-type: A string setting the data transfer type. One of:
38−
39− "prefetch-polled" Prefetch polled mode (default)
40− "polled" Polled mode, without prefetch
41− "prefetch-dma" Prefetch enabled DMA mode
42− "prefetch-irq" Prefetch enabled irq mode
43−
44− - elm_id: <deprecated> use "ti,elm-id" instead
45− - ti,elm-id: Specifies phandle of the ELM devicetree node.
46− ELM is an on-chip hardware engine on TI SoC which is used for
47− locating ECC errors for BCHx algorithms. SoC devices which have
48− ELM hardware engines should specify this device node in .dtsi
49− Using ELM for ECC error correction frees some CPU cycles.
50− - rb-gpios: GPIO specifier for the ready/busy# pin.
51−
52−For inline partition table parsing (optional):
53−
54− - #address-cells: should be set to 1
55− - #size-cells: should be set to 1
56−
57−Example for an AM33xx board:
58−
59− gpmc: gpmc@50000000 {
60− compatible = "ti,am3352-gpmc";
61− ti,hwmods = "gpmc";
62− reg = <0x50000000 0x36c>;
63− interrupts = <100>;
64− gpmc,num-cs = <8>;
65− gpmc,num-waitpins = <2>;
66− #address-cells = <2>;
67− #size-cells = <1>;
68− ranges = <0 0 0x08000000 0x1000000>; /* CS0 space, 16MB */
69− elm_id = <&elm>;
70− interrupt-controller;
71− #interrupt-cells = <2>;
72−
73− nand@0,0 {
74− compatible = "ti,omap2-nand";
75− reg = <0 0 4>; /* CS0, offset 0, NAND I/O window 4 */
76− interrupt-parent = <&gpmc>;
77− interrupts = <0 IRQ_TYPE_NONE>, <1 IRQ_TYPE NONE>;
78− nand-bus-width = <16>;
79− ti,nand-ecc-opt = "bch8";
80− ti,nand-xfer-type = "polled";
81− rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
82−
83− gpmc,sync-clk-ps = <0>;
84− gpmc,cs-on-ns = <0>;
85− gpmc,cs-rd-off-ns = <44>;
86− gpmc,cs-wr-off-ns = <44>;
87− gpmc,adv-on-ns = <6>;
88− gpmc,adv-rd-off-ns = <34>;
89− gpmc,adv-wr-off-ns = <44>;
90− gpmc,we-off-ns = <40>;
91− gpmc,oe-off-ns = <54>;
92− gpmc,access-ns = <64>;
93− gpmc,rd-cycle-ns = <82>;
94− gpmc,wr-cycle-ns = <82>;
95− gpmc,wr-access-ns = <40>;
96− gpmc,wr-data-mux-bus-ns = <0>;
97−
98− #address-cells = <1>;
99− #size-cells = <1>;
100−
101− /* partitions go here */
102− };
103− };
104−
105−How to select correct ECC scheme for your device ?
106−--------------------------------------------------
107−Higher ECC scheme usually means better protection against bit-flips and
108−increased system lifetime. However, selection of ECC scheme is dependent
109−on various other factors also like;
110−
111−(1) support of built in hardware engines.
112− Some legacy OMAP SoC do not have ELM harware engine, so those SoC cannot
113− support ecc-schemes with hardware error-correction (BCHx_HW). However
114− such SoC can use ecc-schemes with software library for error-correction
115− (BCHx_HW_DETECTION_SW). The error correction capability with software
116− library remains equivalent to their hardware counter-part, but there is
117− slight CPU penalty when too many bit-flips are detected during reads.
118−
119−(2) Device parameters like OOBSIZE.
120− Other factor which governs the selection of ecc-scheme is oob-size.
121− Higher ECC schemes require more OOB/Spare area to store ECC syndrome,
122− so the device should have enough free bytes available its OOB/Spare
123− area to accommodate ECC for entire page. In general following expression
124− helps in determining if given device can accommodate ECC syndrome:
125− "2 + (PAGESIZE / 512) * ECC_BYTES" <= OOBSIZE"
126− where
127− OOBSIZE number of bytes in OOB/spare area
128− PAGESIZE number of bytes in main-area of device page
129− ECC_BYTES number of ECC bytes generated to protect
130− 512 bytes of data, which is:
131− '3' for HAM1_xx ecc schemes
132− '7' for BCH4_xx ecc schemes
133− '14' for BCH8_xx ecc schemes
134− '26' for BCH16_xx ecc schemes
135−
136− Example(a): For a device with PAGESIZE = 2048 and OOBSIZE = 64 and
137− trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
138− Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
139− which is greater than capacity of NAND device (OOBSIZE=64)
140− Hence, BCH16 cannot be supported on given device. But it can
141− probably use lower ecc-schemes like BCH8.
142−
143− Example(b): For a device with PAGESIZE = 2048 and OOBSIZE = 128 and
144− trying to use BCH16 (ECC_BYTES=26) ecc-scheme.
145− Number of ECC bytes per page = (2 + (2048 / 512) * 26) = 106 B
146− which can be accommodated in the OOB/Spare area of this device
147− (OOBSIZE=128). So this device can use BCH16 ecc-scheme.
Documentation/devicetree/bindings/mtd/gpmc-nor.txt+0−98
@@ -1,98 +0,0 @@
1−Device tree bindings for NOR flash connect to TI GPMC
2−
3−NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
4−child nodes of the GPMC controller with a name of "nor".
5−
6−All timing relevant properties as well as generic GPMC child properties are
7−explained in a separate documents. Please refer to
8−Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9−
10−Required properties:
11−- bank-width: Width of NOR flash in bytes. GPMC supports 8-bit and
12− 16-bit devices and so must be either 1 or 2 bytes.
13−- compatible: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
14−- gpmc,cs-on-ns: Chip-select assertion time
15−- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
16−- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
17−- gpmc,oe-on-ns: Output-enable assertion time
18−- gpmc,oe-off-ns: Output-enable de-assertion time
19−- gpmc,we-on-ns Write-enable assertion time
20−- gpmc,we-off-ns: Write-enable de-assertion time
21−- gpmc,access-ns: Start cycle to first data capture (read access)
22−- gpmc,rd-cycle-ns: Total read cycle time
23−- gpmc,wr-cycle-ns: Total write cycle time
24−- linux,mtd-name: Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
25−- reg: Chip-select, base address (relative to chip-select)
26− and size of NOR flash. Note that base address will be
27− typically 0 as this is the start of the chip-select.
28−
29−Optional properties:
30−- gpmc,XXX Additional GPMC timings and settings parameters. See
31− Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
32−
33−Optional properties for partition table parsing:
34−- #address-cells: should be set to 1
35−- #size-cells: should be set to 1
36−
37−Example:
38−
39−gpmc: gpmc@6e000000 {
40− compatible = "ti,omap3430-gpmc", "simple-bus";
41− ti,hwmods = "gpmc";
42− reg = <0x6e000000 0x1000>;
43− interrupts = <20>;
44− gpmc,num-cs = <8>;
45− gpmc,num-waitpins = <4>;
46− #address-cells = <2>;
47− #size-cells = <1>;
48−
49− ranges = <0 0 0x10000000 0x08000000>;
50−
51− nor@0,0 {
52− compatible = "cfi-flash";
53− linux,mtd-name= "intel,pf48f6000m0y1be";
54− #address-cells = <1>;
55− #size-cells = <1>;
56− reg = <0 0 0x08000000>;
57− bank-width = <2>;
58−
59− gpmc,mux-add-data;
60− gpmc,cs-on-ns = <0>;
61− gpmc,cs-rd-off-ns = <186>;
62− gpmc,cs-wr-off-ns = <186>;
63− gpmc,adv-on-ns = <12>;
64− gpmc,adv-rd-off-ns = <48>;
65− gpmc,adv-wr-off-ns = <48>;
66− gpmc,oe-on-ns = <54>;
67− gpmc,oe-off-ns = <168>;
68− gpmc,we-on-ns = <54>;
69− gpmc,we-off-ns = <168>;
70− gpmc,rd-cycle-ns = <186>;
71− gpmc,wr-cycle-ns = <186>;
72− gpmc,access-ns = <114>;
73− gpmc,page-burst-access-ns = <6>;
74− gpmc,bus-turnaround-ns = <12>;
75− gpmc,cycle2cycle-delay-ns = <18>;
76− gpmc,wr-data-mux-bus-ns = <90>;
77− gpmc,wr-access-ns = <186>;
78− gpmc,cycle2cycle-samecsen;
79− gpmc,cycle2cycle-diffcsen;
80−
81− partition@0 {
82− label = "bootloader-nor";
83− reg = <0 0x40000>;
84− };
85− partition@40000 {
86− label = "params-nor";
87− reg = <0x40000 0x40000>;
88− };
89− partition@80000 {
90− label = "kernel-nor";
91− reg = <0x80000 0x200000>;
92− };
93− partition@280000 {
94− label = "filesystem-nor";
95− reg = <0x240000 0x7d80000>;
96− };
97− };
98−};
Documentation/devicetree/bindings/mtd/gpmc-onenand.txt+0−48
@@ -1,48 +0,0 @@
1−Device tree bindings for GPMC connected OneNANDs
2−
3−GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
4−the GPMC controller with a name of "onenand".
5−
6−All timing relevant properties as well as generic gpmc child properties are
7−explained in a separate documents - please refer to
8−Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
9−
10−Required properties:
11−
12− - compatible: "ti,omap2-onenand"
13− - reg: The CS line the peripheral is connected to
14− - gpmc,device-width: Width of the ONENAND device connected to the GPMC
15− in bytes. Must be 1 or 2.
16−
17−Optional properties:
18−
19− - int-gpios: GPIO specifier for the INT pin.
20−
21−For inline partition table parsing (optional):
22−
23− - #address-cells: should be set to 1
24− - #size-cells: should be set to 1
25−
26−Example for an OMAP3430 board:
27−
28− gpmc: gpmc@6e000000 {
29− compatible = "ti,omap3430-gpmc";
30− ti,hwmods = "gpmc";
31− reg = <0x6e000000 0x1000000>;
32− interrupts = <20>;
33− gpmc,num-cs = <8>;
34− gpmc,num-waitpins = <4>;
35− #address-cells = <2>;
36− #size-cells = <1>;
37−
38− onenand@0 {
39− compatible = "ti,omap2-onenand";
40− reg = <0 0 0>; /* CS0, offset 0 */
41− gpmc,device-width = <2>;
42−
43− #address-cells = <1>;
44− #size-cells = <1>;
45−
46− /* partitions go here */
47− };
48− };
Documentation/devicetree/bindings/mtd/ti,gpmc-nand.yaml+121−0
@@ -0,0 +1,121 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/mtd/ti,gpmc-nand.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: Texas Instruments GPMC NAND Flash controller.
8+
9+maintainers:
10+ - Tony Lindgren <tony@atomide.com>
11+ - Roger Quadros <rogerq@kernel.org>
12+
13+description:
14+ GPMC NAND controller/Flash is represented as a child of the
15+ GPMC controller node.
16+
17+properties:
18+ compatible:
19+ const: ti,omap2-nand
20+
21+ reg:
22+ maxItems: 1
23+
24+ interrupts:
25+ items:
26+ - description: Interrupt for fifoevent
27+ - description: Interrupt for termcount
28+
29+ "#address-cells": true
30+
31+ "#size-cells": true
32+
33+ ti,nand-ecc-opt:
34+ description: Desired ECC algorithm
35+ $ref: /schemas/types.yaml#/definitions/string
36+ enum: [sw, ham1, bch4, bch8, bch16]
37+
38+ ti,nand-xfer-type:
39+ description: Data transfer method between controller and chip.
40+ $ref: /schemas/types.yaml#/definitions/string
41+ enum: [prefetch-polled, polled, prefetch-dma, prefetch-irq]
42+ default: prefetch-polled
43+
44+ ti,elm-id:
45+ description:
46+ phandle to the ELM (Error Location Module).
47+ $ref: /schemas/types.yaml#/definitions/phandle
48+
49+ nand-bus-width:
50+ description:
51+ Bus width to the NAND chip
52+ $ref: /schemas/types.yaml#/definitions/uint32
53+ enum: [8, 16]
54+ default: 8
55+
56+patternProperties:
57+ "@[0-9a-f]+$":
58+ $ref: "/schemas/mtd/partitions/partition.yaml"
59+
60+allOf:
61+ - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
62+
63+required:
64+ - compatible
65+ - reg
66+ - ti,nand-ecc-opt
67+
68+unevaluatedProperties: false
69+
70+examples:
71+ - |
72+ #include <dt-bindings/interrupt-controller/arm-gic.h>
73+ #include <dt-bindings/gpio/gpio.h>
74+
75+ gpmc: memory-controller@50000000 {
76+ compatible = "ti,am3352-gpmc";
77+ dmas = <&edma 52 0>;
78+ dma-names = "rxtx";
79+ clocks = <&l3s_gclk>;
80+ clock-names = "fck";
81+ reg = <0x50000000 0x2000>;
82+ interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
83+ gpmc,num-cs = <7>;
84+ gpmc,num-waitpins = <2>;
85+ #address-cells = <2>;
86+ #size-cells = <1>;
87+ interrupt-controller;
88+ #interrupt-cells = <2>;
89+ gpio-controller;
90+ #gpio-cells = <2>;
91+
92+ ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
93+ nand@0,0 {
94+ compatible = "ti,omap2-nand";
95+ reg = <0 0 4>; /* device IO registers */
96+ interrupt-parent = <&gpmc>;
97+ interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
98+ <1 IRQ_TYPE_NONE>; /* termcount */
99+ ti,nand-xfer-type = "prefetch-dma";
100+ ti,nand-ecc-opt = "bch16";
101+ ti,elm-id = <&elm>;
102+ #address-cells = <1>;
103+ #size-cells = <1>;
104+
105+ /* NAND generic properties */
106+ nand-bus-width = <8>;
107+ rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
108+
109+ /* GPMC properties*/
110+ gpmc,device-width = <1>;
111+
112+ partition@0 {
113+ label = "NAND.SPL";
114+ reg = <0x00000000 0x00040000>;
115+ };
116+ partition@1 {
117+ label = "NAND.SPL.backup1";
118+ reg = <0x00040000 0x00040000>;
119+ };
120+ };
121+ };
Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml+81−0
@@ -0,0 +1,81 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: OneNAND over Texas Instruments GPMC bus.
8+
9+maintainers:
10+ - Tony Lindgren <tony@atomide.com>
11+ - Roger Quadros <rogerq@kernel.org>
12+
13+description:
14+ GPMC connected OneNAND (found on OMAP boards) are represented
15+ as child nodes of the GPMC controller.
16+
17+properties:
18+ compatible:
19+ const: ti,omap2-onenand
20+
21+ reg:
22+ items:
23+ - description: |
24+ Chip Select number, register offset and size of
25+ OneNAND register window.
26+
27+ "#address-cells": true
28+
29+ "#size-cells": true
30+
31+ int-gpios:
32+ description: GPIO specifier for the INT pin.
33+
34+patternProperties:
35+ "@[0-9a-f]+$":
36+ $ref: "/schemas/mtd/partitions/partition.yaml"
37+
38+allOf:
39+ - $ref: "/schemas/memory-controllers/ti,gpmc-child.yaml"
40+
41+required:
42+ - compatible
43+ - reg
44+ - "#address-cells"
45+ - "#size-cells"
46+
47+unevaluatedProperties: false
48+
49+examples:
50+ - |
51+ gpmc: memory-controller@6e000000 {
52+ compatible = "ti,omap3430-gpmc";
53+ reg = <0x6e000000 0x02d0>;
54+ interrupts = <20>;
55+ gpmc,num-cs = <8>;
56+ gpmc,num-waitpins = <4>;
57+ clocks = <&l3s_clkctrl>;
58+ clock-names = "fck";
59+ #address-cells = <2>;
60+ #size-cells = <1>;
61+
62+ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
63+ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
64+
65+ onenand@0,0 {
66+ compatible = "ti,omap2-onenand";
67+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
68+ #address-cells = <1>;
69+ #size-cells = <1>;
70+
71+ partition@0 {
72+ label = "bootloader";
73+ reg = <0x00000000 0x00100000>;
74+ };
75+
76+ partition@100000 {
77+ label = "config";
78+ reg = <0x00100000 0x002c0000>;
79+ };
80+ };
81+ };
Documentation/devicetree/bindings/net/gpmc-eth.txt+0−97
@@ -1,97 +0,0 @@
1−Device tree bindings for Ethernet chip connected to TI GPMC
2−
3−Besides being used to interface with external memory devices, the
4−General-Purpose Memory Controller can be used to connect Pseudo-SRAM devices
5−such as ethernet controllers to processors using the TI GPMC as a data bus.
6−
7−Ethernet controllers connected to TI GPMC are represented as child nodes of
8−the GPMC controller with an "ethernet" name.
9−
10−All timing relevant properties as well as generic GPMC child properties are
11−explained in a separate documents. Please refer to
12−Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
13−
14−For the properties relevant to the ethernet controller connected to the GPMC
15−refer to the binding documentation of the device. For example, the documentation
16−for the SMSC 911x is Documentation/devicetree/bindings/net/smsc,lan9115.yaml
17−
18−Child nodes need to specify the GPMC bus address width using the "bank-width"
19−property but is possible that an ethernet controller also has a property to
20−specify the I/O registers address width. Even when the GPMC has a maximum 16-bit
21−address width, it supports devices with 32-bit word registers.
22−For example with an SMSC LAN911x/912x controller connected to the TI GPMC on an
23−OMAP2+ board, "bank-width = <2>;" and "reg-io-width = <4>;".
24−
25−Required properties:
26−- bank-width: Address width of the device in bytes. GPMC supports 8-bit
27− and 16-bit devices and so must be either 1 or 2 bytes.
28−- compatible: Compatible string property for the ethernet child device.
29−- gpmc,cs-on-ns: Chip-select assertion time
30−- gpmc,cs-rd-off-ns: Chip-select de-assertion time for reads
31−- gpmc,cs-wr-off-ns: Chip-select de-assertion time for writes
32−- gpmc,oe-on-ns: Output-enable assertion time
33−- gpmc,oe-off-ns: Output-enable de-assertion time
34−- gpmc,we-on-ns: Write-enable assertion time
35−- gpmc,we-off-ns: Write-enable de-assertion time
36−- gpmc,access-ns: Start cycle to first data capture (read access)
37−- gpmc,rd-cycle-ns: Total read cycle time
38−- gpmc,wr-cycle-ns: Total write cycle time
39−- reg: Chip-select, base address (relative to chip-select)
40− and size of the memory mapped for the device.
41− Note that base address will be typically 0 as this
42− is the start of the chip-select.
43−
44−Optional properties:
45−- gpmc,XXX Additional GPMC timings and settings parameters. See
46− Documentation/devicetree/bindings/memory-controllers/omap-gpmc.txt
47−
48−Example:
49−
50−gpmc: gpmc@6e000000 {
51− compatible = "ti,omap3430-gpmc";
52− ti,hwmods = "gpmc";
53− reg = <0x6e000000 0x1000>;
54− interrupts = <20>;
55− gpmc,num-cs = <8>;
56− gpmc,num-waitpins = <4>;
57− #address-cells = <2>;
58− #size-cells = <1>;
59−
60− ranges = <5 0 0x2c000000 0x1000000>;
61−
62− ethernet@5,0 {
63− compatible = "smsc,lan9221", "smsc,lan9115";
64− reg = <5 0 0xff>;
65− bank-width = <2>;
66−
67− gpmc,mux-add-data;
68− gpmc,cs-on-ns = <0>;
69− gpmc,cs-rd-off-ns = <186>;
70− gpmc,cs-wr-off-ns = <186>;
71− gpmc,adv-on-ns = <12>;
72− gpmc,adv-rd-off-ns = <48>;
73− gpmc,adv-wr-off-ns = <48>;
74− gpmc,oe-on-ns = <54>;
75− gpmc,oe-off-ns = <168>;
76− gpmc,we-on-ns = <54>;
77− gpmc,we-off-ns = <168>;
78− gpmc,rd-cycle-ns = <186>;
79− gpmc,wr-cycle-ns = <186>;
80− gpmc,access-ns = <114>;
81− gpmc,page-burst-access-ns = <6>;
82− gpmc,bus-turnaround-ns = <12>;
83− gpmc,cycle2cycle-delay-ns = <18>;
84− gpmc,wr-data-mux-bus-ns = <90>;
85− gpmc,wr-access-ns = <186>;
86− gpmc,cycle2cycle-samecsen;
87− gpmc,cycle2cycle-diffcsen;
88−
89− interrupt-parent = <&gpio6>;
90− interrupts = <16>;
91− vmmc-supply = <&vddvario>;
92− vmmc_aux-supply = <&vdd33a>;
93− reg-io-width = <4>;
94−
95− smsc,save-mac-address;
96− };
97−};
Documentation/devicetree/bindings/pci/nvidia,tegra194-pcie.txt+1−1
@@ -197,7 +197,7 @@ Tegra194 RC mode: · 196 unmodified lines
197197 Tegra194 EP mode:
198198 -----------------
199199
200− pcie_ep@141a0000 {
200+ pcie-ep@141a0000 {
201201 compatible = "nvidia,tegra194-pcie-ep", "snps,dw-pcie-ep";
202202 power-domains = <&bpmp TEGRA194_POWER_DOMAIN_PCIEX8A>;
203203 reg = <0x00 0x141a0000 0x0 0x00020000 /* appl registers (128K) */
Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.txt+0−22
@@ -1,22 +0,0 @@
1−* Freescale LINFlexD UART
2−
3−The LINFlexD controller implements several LIN protocol versions, as well as
4−support for full-duplex UART communication through 8-bit and 9-bit frames.
5−
6−See chapter 47 ("LINFlexD") in the reference manual[1].
7−
8−Required properties:
9−- compatible :
10− - "fsl,s32v234-linflexuart" for LINFlexD configured in UART mode, which
11− is compatible with the one integrated on S32V234 SoC
12−- reg : Address and length of the register set for the device
13−- interrupts : Should contain uart interrupt
14−
15−Example:
16−uart0: serial@40053000 {
17− compatible = "fsl,s32v234-linflexuart";
18− reg = <0x0 0x40053000 0x0 0x1000>;
19− interrupts = <0 59 4>;
20−};
21−
22−[1] https://www.nxp.com/webapp/Download?colCode=S32V234RM
Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml+48−0
@@ -0,0 +1,48 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/serial/fsl,s32-linflexuart.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: Freescale LINFlexD UART
8+
9+description: |
10+ The LINFlexD controller implements several LIN protocol versions, as well
11+ as support for full-duplex UART communication through 8-bit and 9-bit
12+ frames. See chapter 47 ("LINFlexD") in the reference manual
13+ https://www.nxp.com/webapp/Download?colCode=S32V234RM.
14+
15+maintainers:
16+ - Chester Lin <clin@suse.com>
17+
18+allOf:
19+ - $ref: "serial.yaml"
20+
21+properties:
22+ compatible:
23+ oneOf:
24+ - const: fsl,s32v234-linflexuart
25+ - items:
26+ - const: nxp,s32g2-linflexuart
27+ - const: fsl,s32v234-linflexuart
28+
29+ reg:
30+ maxItems: 1
31+
32+ interrupts:
33+ maxItems: 1
34+
35+required:
36+ - compatible
37+ - reg
38+ - interrupts
39+
40+unevaluatedProperties: false
41+
42+examples:
43+ - |
44+ serial@40053000 {
45+ compatible = "fsl,s32v234-linflexuart";
46+ reg = <0x40053000 0x1000>;
47+ interrupts = <0 59 4>;
48+ };
Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml+94−0
@@ -0,0 +1,94 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-disp-blk-ctrl.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: NXP i.MX8MM DISP blk-ctrl
8+
9+maintainers:
10+ - Lucas Stach <l.stach@pengutronix.de>
11+
12+description:
13+ The i.MX8MM DISP blk-ctrl is a top-level peripheral providing access to
14+ the NoC and ensuring proper power sequencing of the display and MIPI CSI
15+ peripherals located in the DISP domain of the SoC.
16+
17+properties:
18+ compatible:
19+ items:
20+ - const: fsl,imx8mm-disp-blk-ctrl
21+ - const: syscon
22+
23+ reg:
24+ maxItems: 1
25+
26+ '#power-domain-cells':
27+ const: 1
28+
29+ power-domains:
30+ minItems: 5
31+ maxItems: 5
32+
33+ power-domain-names:
34+ items:
35+ - const: bus
36+ - const: csi-bridge
37+ - const: lcdif
38+ - const: mipi-dsi
39+ - const: mipi-csi
40+
41+ clocks:
42+ minItems: 10
43+ maxItems: 10
44+
45+ clock-names:
46+ items:
47+ - const: csi-bridge-axi
48+ - const: csi-bridge-apb
49+ - const: csi-bridge-core
50+ - const: lcdif-axi
51+ - const: lcdif-apb
52+ - const: lcdif-pix
53+ - const: dsi-pclk
54+ - const: dsi-ref
55+ - const: csi-aclk
56+ - const: csi-pclk
57+
58+required:
59+ - compatible
60+ - reg
61+ - power-domains
62+ - power-domain-names
63+ - clocks
64+ - clock-names
65+
66+additionalProperties: false
67+
68+examples:
69+ - |
70+ #include <dt-bindings/clock/imx8mm-clock.h>
71+ #include <dt-bindings/power/imx8mm-power.h>
72+
73+ disp_blk_ctl: blk_ctrl@32e28000 {
74+ compatible = "fsl,imx8mm-disp-blk-ctrl", "syscon";
75+ reg = <0x32e28000 0x100>;
76+ power-domains = <&pgc_dispmix>, <&pgc_dispmix>, <&pgc_dispmix>,
77+ <&pgc_mipi>, <&pgc_mipi>;
78+ power-domain-names = "bus", "csi-bridge", "lcdif",
79+ "mipi-dsi", "mipi-csi";
80+ clocks = <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
81+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
82+ <&clk IMX8MM_CLK_CSI1_ROOT>,
83+ <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
84+ <&clk IMX8MM_CLK_DISP_APB_ROOT>,
85+ <&clk IMX8MM_CLK_DISP_ROOT>,
86+ <&clk IMX8MM_CLK_DSI_CORE>,
87+ <&clk IMX8MM_CLK_DSI_PHY_REF>,
88+ <&clk IMX8MM_CLK_CSI1_CORE>,
89+ <&clk IMX8MM_CLK_CSI1_PHY_REF>;
90+ clock-names = "csi-bridge-axi", "csi-bridge-apb", "csi-bridge-core",
91+ "lcdif-axi", "lcdif-apb", "lcdif-pix", "dsi-pclk",
92+ "dsi-ref", "csi-aclk", "csi-pclk";
93+ #power-domain-cells = <1>;
94+ };
Documentation/devicetree/bindings/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml+76−0
@@ -0,0 +1,76 @@
1+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2+%YAML 1.2
3+---
4+$id: http://devicetree.org/schemas/soc/imx/fsl,imx8mm-vpu-blk-ctrl.yaml#
5+$schema: http://devicetree.org/meta-schemas/core.yaml#
6+
7+title: NXP i.MX8MM VPU blk-ctrl
8+
9+maintainers:
10+ - Lucas Stach <l.stach@pengutronix.de>
11+
12+description:
13+ The i.MX8MM VPU blk-ctrl is a top-level peripheral providing access to
14+ the NoC and ensuring proper power sequencing of the VPU peripherals
15+ located in the VPU domain of the SoC.
16+
17+properties:
18+ compatible:
19+ items:
20+ - const: fsl,imx8mm-vpu-blk-ctrl
21+ - const: syscon
22+
23+ reg:
24+ maxItems: 1
25+
26+ '#power-domain-cells':
27+ const: 1
28+
29+ power-domains:
30+ minItems: 4
31+ maxItems: 4
32+
33+ power-domain-names:
34+ items:
35+ - const: bus
36+ - const: g1
37+ - const: g2
38+ - const: h1
39+
40+ clocks:
41+ minItems: 3
42+ maxItems: 3
43+
44+ clock-names:
45+ items:
46+ - const: g1
47+ - const: g2
48+ - const: h1
49+
50+required:
51+ - compatible
52+ - reg
53+ - power-domains
54+ - power-domain-names
55+ - clocks
56+ - clock-names
57+
58+additionalProperties: false
59+
60+examples:
61+ - |
62+ #include <dt-bindings/clock/imx8mm-clock.h>
63+ #include <dt-bindings/power/imx8mm-power.h>
64+
65+ vpu_blk_ctrl: blk-ctrl@38330000 {
66+ compatible = "fsl,imx8mm-vpu-blk-ctrl", "syscon";
67+ reg = <0x38330000 0x100>;
68+ power-domains = <&pgc_vpumix>, <&pgc_vpu_g1>,
69+ <&pgc_vpu_g2>, <&pgc_vpu_h1>;
70+ power-domain-names = "bus", "g1", "g2", "h1";
71+ clocks = <&clk IMX8MM_CLK_VPU_G1_ROOT>,
72+ <&clk IMX8MM_CLK_VPU_G2_ROOT>,
73+ <&clk IMX8MM_CLK_VPU_H1_ROOT>;
74+ clock-names = "g1", "g2", "h1";
75+ #power-domain-cells = <1>;
76+ };
Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml+3−0
@@ -20,6 +20,9 @@ properties: · 19 unmodified lines
2020 - const: allwinner,sun6i-a31-i2s
2121 - const: allwinner,sun8i-a83t-i2s
2222 - const: allwinner,sun8i-h3-i2s
23+ - items:
24+ - const: allwinner,sun8i-r40-i2s
25+ - const: allwinner,sun8i-h3-i2s
2326 - items:
2427 - const: allwinner,sun8i-v3-i2s
2528 - const: allwinner,sun8i-h3-i2s
Documentation/devicetree/bindings/vendor-prefixes.yaml+10−0
@@ -193,6 +193,8 @@ patternProperties: · 192 unmodified lines
193193 description: B&R Industrial Automation GmbH
194194 "^bticino,.*":
195195 description: Bticino International
196+ "^calamp,.*":
197+ description: CalAmp Corp.
196198 "^calaosystems,.*":
197199 description: CALAO Systems SAS
198200 "^calxeda,.*":
@@ -337,6 +339,8 @@ patternProperties: · 138 unmodified lines
337339 description: EBV Elektronik
338340 "^eckelmann,.*":
339341 description: Eckelmann AG
342+ "^edimax,.*":
343+ description: EDIMAX Technology Co., Ltd
340344 "^edt,.*":
341345 description: Emerging Display Technologies
342346 "^eeti,.*":
@@ -397,6 +401,8 @@ patternProperties: · 54 unmodified lines
397401 description: Exar Corporation
398402 "^excito,.*":
399403 description: Excito
404+ "^exegin,.*":
405+ description: Exegin Technologies Limited
400406 "^ezchip,.*":
401407 description: EZchip Semiconductor
402408 "^facebook,.*":
@@ -581,6 +587,8 @@ patternProperties: · 178 unmodified lines
581587 description: JEDEC Solid State Technology Association
582588 "^jesurun,.*":
583589 description: Shenzhen Jesurun Electronics Business Dept.
590+ "^jethome,.*":
591+ description: JetHome (IP Sokolov P.A.)
584592 "^jianda,.*":
585593 description: Jiandangjing Technology Co., Ltd.
586594 "^kam,.*":
@@ -1108,6 +1116,8 @@ patternProperties: · 521 unmodified lines
11081116 description: SpinalHDL
11091117 "^sprd,.*":
11101118 description: Spreadtrum Communications Inc.
1119+ "^ssi,.*":
1120+ description: SSI Computer Corp
11111121 "^sst,.*":
11121122 description: Silicon Storage Technology, Inc.
11131123 "^sstar,.*":
MAINTAINERS+1−0
@@ -6352,6 +6352,7 @@ L: linux-tegra@vger.kernel.org · 6351 unmodified lines
63526352 S: Supported
63536353 T: git git://anongit.freedesktop.org/tegra/linux.git
63546354 F: Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
6355+F: Documentation/devicetree/bindings/gpu/host1x/
63556356 F: drivers/gpu/drm/tegra/
63566357 F: drivers/gpu/host1x/
63576358 F: include/linux/host1x.h
arch/arm/boot/dts/Makefile+24−2
@@ -25,6 +25,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ · 24 unmodified lines
2525 usb_a9263.dtb \
2626 at91-foxg20.dtb \
2727 at91-kizbox.dtb \
28+ at91-lmu5000.dtb \
2829 at91sam9g20ek.dtb \
2930 at91sam9g20ek_2mmc.dtb \
3031 tny_a9g20.dtb \
@@ -40,6 +41,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \ · 9 unmodified lines
4041 at91-kizboxmini-base.dtb \
4142 at91-kizboxmini-mb.dtb \
4243 at91-kizboxmini-rd.dtb \
44+ at91-q5xr5.dtb \
4345 at91-smartkiz.dtb \
4446 at91-wb45n.dtb \
4547 at91sam9g15ek.dtb \
@@ -92,6 +94,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ · 46 unmodified lines
9294 bcm2837-rpi-cm3-io3.dtb \
9395 bcm2711-rpi-400.dtb \
9496 bcm2711-rpi-4-b.dtb \
97+ bcm2711-rpi-cm4-io.dtb \
9598 bcm2835-rpi-zero.dtb \
9699 bcm2835-rpi-zero-w.dtb
97100 dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -117,6 +120,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ · 19 unmodified lines
117120 bcm4709-netgear-r7000.dtb \
118121 bcm4709-netgear-r8000.dtb \
119122 bcm4709-tplink-archer-c9-v1.dtb \
123+ bcm47094-asus-rt-ac88u.dtb \
120124 bcm47094-dlink-dir-885l.dtb \
121125 bcm47094-linksys-panamera.dtb \
122126 bcm47094-luxul-abr-4500.dtb \
@@ -157,6 +161,12 @@ dtb-$(CONFIG_ARCH_BCM_NSP) += \ · 34 unmodified lines
157161 bcm958525xmc.dtb \
158162 bcm958622hr.dtb \
159163 bcm958623hr.dtb \
164+ bcm958625-meraki-mx64.dtb \
165+ bcm958625-meraki-mx64-a0.dtb \
166+ bcm958625-meraki-mx64w.dtb \
167+ bcm958625-meraki-mx64w-a0.dtb \
168+ bcm958625-meraki-mx65.dtb \
169+ bcm958625-meraki-mx65w.dtb \
160170 bcm958625hr.dtb \
161171 bcm988312hr.dtb \
162172 bcm958625k.dtb
@@ -219,9 +229,11 @@ dtb-$(CONFIG_ARCH_GEMINI) += \ · 56 unmodified lines
219229 gemini-dlink-dir-685.dtb \
220230 gemini-dlink-dns-313.dtb \
221231 gemini-nas4220b.dtb \
232+ gemini-ns2502.dtb \
222233 gemini-rut1xx.dtb \
223234 gemini-sl93512r.dtb \
224235 gemini-sq201.dtb \
236+ gemini-ssi1328.dtb \
225237 gemini-wbd111.dtb \
226238 gemini-wbd222.dtb
227239 dtb-$(CONFIG_ARCH_HI3xxx) += \
@@ -635,10 +647,12 @@ dtb-$(CONFIG_SOC_IMX6SL) += \ · 407 unmodified lines
635647 imx6sl-evk.dtb \
636648 imx6sl-tolino-shine2hd.dtb \
637649 imx6sl-tolino-shine3.dtb \
650+ imx6sl-tolino-vision5.dtb \
638651 imx6sl-warp.dtb
639652 dtb-$(CONFIG_SOC_IMX6SLL) += \
640653 imx6sll-evk.dtb \
641− imx6sll-kobo-clarahd.dtb
654+ imx6sll-kobo-clarahd.dtb \
655+ imx6sll-kobo-librah2o.dtb
642656 dtb-$(CONFIG_SOC_IMX6SX) += \
643657 imx6sx-nitrogen6sx.dtb \
644658 imx6sx-sabreauto.dtb \
@@ -671,6 +685,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \ · 26 unmodified lines
671685 imx6ul-tx6ul-0011.dtb \
672686 imx6ul-tx6ul-mainboard.dtb \
673687 imx6ull-14x14-evk.dtb \
688+ imx6ull-colibri-emmc-eval-v3.dtb \
674689 imx6ull-colibri-eval-v3.dtb \
675690 imx6ull-colibri-wifi-eval-v3.dtb \
676691 imx6ull-myir-mys-6ulx-eval.dtb \
@@ -939,6 +954,7 @@ dtb-$(CONFIG_ARCH_OXNAS) += \ · 262 unmodified lines
939954 ox810se-wd-mbwe.dtb \
940955 ox820-cloudengines-pogoplug-series-3.dtb
941956 dtb-$(CONFIG_ARCH_QCOM) += \
957+ qcom-apq8026-lg-lenok.dtb \
942958 qcom-apq8060-dragonboard.dtb \
943959 qcom-apq8064-cm-qs600.dtb \
944960 qcom-apq8064-ifc6410.dtb \
@@ -959,6 +975,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ · 14 unmodified lines
959975 qcom-ipq8064-rb3011.dtb \
960976 qcom-msm8226-samsung-s3ve3g.dtb \
961977 qcom-msm8660-surf.dtb \
978+ qcom-msm8916-samsung-serranove.dtb \
962979 qcom-msm8960-cdp.dtb \
963980 qcom-msm8974-fairphone-fp2.dtb \
964981 qcom-msm8974-lge-nexus5-hammerhead.dtb \
@@ -1075,6 +1092,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \ · 110 unmodified lines
10751092 s5pv210-torbreck.dtb
10761093 dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
10771094 socfpga_arria5_socdk.dtb \
1095+ socfpga_arria10_mercury_aa1.dtb \
10781096 socfpga_arria10_socdk_nand.dtb \
10791097 socfpga_arria10_socdk_qspi.dtb \
10801098 socfpga_arria10_socdk_sdmmc.dtb \
@@ -1113,6 +1131,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ · 32 unmodified lines
11131131 stm32h743i-eval.dtb \
11141132 stm32h743i-disco.dtb \
11151133 stm32h750i-art-pi.dtb \
1134+ stm32mp135f-dk.dtb \
11161135 stm32mp153c-dhcom-drc02.dtb \
11171136 stm32mp157a-avenger96.dtb \
11181137 stm32mp157a-dhcor-avenger96.dtb \
@@ -1387,6 +1406,7 @@ dtb-$(CONFIG_MACH_ARMADA_370) += \ · 268 unmodified lines
13871406 dtb-$(CONFIG_MACH_ARMADA_375) += \
13881407 armada-375-db.dtb
13891408 dtb-$(CONFIG_MACH_ARMADA_38X) += \
1409+ armada-381-netgear-gs110emx.dtb \
13901410 armada-382-rd-ac3x-48g4x2xl.dtb \
13911411 armada-385-atl-x530.dtb\
13921412 armada-385-clearfog-gtr-s4.dtb \
@@ -1497,4 +1517,6 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ · 104 unmodified lines
14971517 aspeed-bmc-opp-zaius.dtb \
14981518 aspeed-bmc-portwell-neptune.dtb \
14991519 aspeed-bmc-quanta-q71l.dtb \
1500− aspeed-bmc-supermicro-x11spi.dtb
1520+ aspeed-bmc-supermicro-x11spi.dtb \
1521+ aspeed-bmc-inventec-transformers.dtb \
1522+ aspeed-bmc-tyan-s7106.dtb
arch/arm/boot/dts/am335x-pocketbeagle.dts+1−0
@@ -205,6 +205,7 @@ · 204 unmodified lines
205205
206206 &am33xx_pinmux {
207207
208+ compatible = "pinconf-single";
208209 pinctrl-names = "default";
209210
210211 pinctrl-0 = < &P2_03_gpio &P1_34_gpio &P2_19_gpio &P2_24_gpio
arch/arm/boot/dts/arm-realview-eb.dtsi+29−13
@@ -198,96 +198,112 @@ · 197 unmodified lines
198198 syscon: syscon@10000000 {
199199 compatible = "arm,realview-eb-syscon", "syscon", "simple-mfd";
200200 reg = <0x10000000 0x1000>;
201+ ranges = <0x0 0x10000000 0x1000>;
202+ #address-cells = <1>;
203+ #size-cells = <1>;
201204
202− led@08.0 {
205+ led@8,0 {
203206 compatible = "register-bit-led";
207+ reg = <0x08 0x04>;
204208 offset = <0x08>;
205209 mask = <0x01>;
206210 label = "versatile:0";
207211 linux,default-trigger = "heartbeat";
208212 default-state = "on";
209213 };
210− led@08.1 {
214+ led@8,1 {
211215 compatible = "register-bit-led";
216+ reg = <0x08 0x04>;
212217 offset = <0x08>;
213218 mask = <0x02>;
214219 label = "versatile:1";
215220 linux,default-trigger = "mmc0";
216221 default-state = "off";
217222 };
218− led@08.2 {
223+ led@8,2 {
219224 compatible = "register-bit-led";
225+ reg = <0x08 0x04>;
220226 offset = <0x08>;
221227 mask = <0x04>;
222228 label = "versatile:2";
223229 linux,default-trigger = "cpu0";
224230 default-state = "off";
225231 };
226− led@08.3 {
232+ led@8,3 {
227233 compatible = "register-bit-led";
234+ reg = <0x08 0x04>;
228235 offset = <0x08>;
229236 mask = <0x08>;
230237 label = "versatile:3";
231238 default-state = "off";
232239 };
233− led@08.4 {
240+ led@8,4 {
234241 compatible = "register-bit-led";
242+ reg = <0x08 0x04>;
235243 offset = <0x08>;
236244 mask = <0x10>;
237245 label = "versatile:4";
238246 default-state = "off";
239247 };
240− led@08.5 {
248+ led@8,5 {
241249 compatible = "register-bit-led";
250+ reg = <0x08 0x04>;
242251 offset = <0x08>;
243252 mask = <0x20>;
244253 label = "versatile:5";
245254 default-state = "off";
246255 };
247− led@08.6 {
256+ led@8,6 {
248257 compatible = "register-bit-led";
258+ reg = <0x08 0x04>;
249259 offset = <0x08>;
250260 mask = <0x40>;
251261 label = "versatile:6";
252262 default-state = "off";
253263 };
254− led@08.7 {
264+ led@8,7 {
255265 compatible = "register-bit-led";
266+ reg = <0x08 0x04>;
256267 offset = <0x08>;
257268 mask = <0x80>;
258269 label = "versatile:7";
259270 default-state = "off";
260271 };
261− oscclk0: osc0@0c {
272+ oscclk0: clock-controller@c {
262273 compatible = "arm,syscon-icst307";
274+ reg = <0x0c 0x04>;
263275 #clock-cells = <0>;
264276 lock-offset = <0x20>;
265277 vco-offset = <0x0C>;
266278 clocks = <&xtal24mhz>;
267279 };
268− oscclk1: osc1@10 {
280+ oscclk1: clock-controller@10 {
269281 compatible = "arm,syscon-icst307";
282+ reg = <0x10 0x04>;
270283 #clock-cells = <0>;
271284 lock-offset = <0x20>;
272285 vco-offset = <0x10>;
273286 clocks = <&xtal24mhz>;
274287 };
275− oscclk2: osc2@14 {
288+ oscclk2: clock-controller@14 {
276289 compatible = "arm,syscon-icst307";
290+ reg = <0x14 0x04>;
277291 #clock-cells = <0>;
278292 lock-offset = <0x20>;
279293 vco-offset = <0x14>;
280294 clocks = <&xtal24mhz>;
281295 };
282− oscclk3: osc3@18 {
296+ oscclk3: clock-controller@18 {
283297 compatible = "arm,syscon-icst307";
298+ reg = <0x18 0x04>;
284299 #clock-cells = <0>;
285300 lock-offset = <0x20>;
286301 vco-offset = <0x18>;
287302 clocks = <&xtal24mhz>;
288303 };
289− oscclk4: osc4@1c {
304+ oscclk4: clock-controller@1c {
290305 compatible = "arm,syscon-icst307";
306+ reg = <0x1c 0x04>;
291307 #clock-cells = <0>;
292308 lock-offset = <0x20>;
293309 vco-offset = <0x1c>;
arch/arm/boot/dts/arm-realview-pb1176.dts+29−13
@@ -216,96 +216,112 @@ · 215 unmodified lines
216216 syscon: syscon@10000000 {
217217 compatible = "arm,realview-pb1176-syscon", "syscon", "simple-mfd";
218218 reg = <0x10000000 0x1000>;
219+ ranges = <0x0 0x10000000 0x1000>;
220+ #address-cells = <1>;
221+ #size-cells = <1>;
219222
220− led@08.0 {
223+ led@8,0 {
221224 compatible = "register-bit-led";
225+ reg = <0x08 0x04>;
222226 offset = <0x08>;
223227 mask = <0x01>;
224228 label = "versatile:0";
225229 linux,default-trigger = "heartbeat";
226230 default-state = "on";
227231 };
228− led@08.1 {
232+ led@8,1 {
229233 compatible = "register-bit-led";
234+ reg = <0x08 0x04>;
230235 offset = <0x08>;
231236 mask = <0x02>;
232237 label = "versatile:1";
233238 linux,default-trigger = "mmc0";
234239 default-state = "off";
235240 };
236− led@08.2 {
241+ led@8,2 {
237242 compatible = "register-bit-led";
243+ reg = <0x08 0x04>;
238244 offset = <0x08>;
239245 mask = <0x04>;
240246 label = "versatile:2";
241247 linux,default-trigger = "cpu0";
242248 default-state = "off";
243249 };
244− led@08.3 {
250+ led@8,3 {
245251 compatible = "register-bit-led";
252+ reg = <0x08 0x04>;
246253 offset = <0x08>;
247254 mask = <0x08>;
248255 label = "versatile:3";
249256 default-state = "off";
250257 };
251− led@08.4 {
258+ led@8,4 {
252259 compatible = "register-bit-led";
260+ reg = <0x08 0x04>;
253261 offset = <0x08>;
254262 mask = <0x10>;
255263 label = "versatile:4";
256264 default-state = "off";
257265 };
258− led@08.5 {
266+ led@8,5 {
259267 compatible = "register-bit-led";
268+ reg = <0x08 0x04>;
260269 offset = <0x08>;
261270 mask = <0x20>;
262271 label = "versatile:5";
263272 default-state = "off";
264273 };
265− led@08.6 {
274+ led@8,6 {
266275 compatible = "register-bit-led";
276+ reg = <0x08 0x04>;
267277 offset = <0x08>;
268278 mask = <0x40>;
269279 label = "versatile:6";
270280 default-state = "off";
271281 };
272− led@08.7 {
282+ led@8,7 {
273283 compatible = "register-bit-led";
284+ reg = <0x08 0x04>;
274285 offset = <0x08>;
275286 mask = <0x80>;
276287 label = "versatile:7";
277288 default-state = "off";
278289 };
279− oscclk0: osc0@0c {
290+ oscclk0: clock-controller@c {
280291 compatible = "arm,syscon-icst307";
292+ reg = <0x0c 0x04>;
281293 #clock-cells = <0>;
282294 lock-offset = <0x20>;
283295 vco-offset = <0x0C>;
284296 clocks = <&xtal24mhz>;
285297 };
286− oscclk1: osc1@10 {
298+ oscclk1: clock-controller@10 {
287299 compatible = "arm,syscon-icst307";
300+ reg = <0x10 0x04>;
288301 #clock-cells = <0>;
289302 lock-offset = <0x20>;
290303 vco-offset = <0x10>;
291304 clocks = <&xtal24mhz>;
292305 };
293− oscclk2: osc2@14 {
306+ oscclk2: clock-controller@14 {
294307 compatible = "arm,syscon-icst307";
308+ reg = <0x14 0x04>;
295309 #clock-cells = <0>;
296310 lock-offset = <0x20>;
297311 vco-offset = <0x14>;
298312 clocks = <&xtal24mhz>;
299313 };
300− oscclk3: osc3@18 {
314+ oscclk3: clock-controller@18 {
301315 compatible = "arm,syscon-icst307";
316+ reg = <0x18 0x04>;
302317 #clock-cells = <0>;
303318 lock-offset = <0x20>;
304319 vco-offset = <0x18>;
305320 clocks = <&xtal24mhz>;
306321 };
307− oscclk4: osc4@1c {
322+ oscclk4: clock-controller@1c {
308323 compatible = "arm,syscon-icst307";
324+ reg = <0x1c 0x04>;
309325 #clock-cells = <0>;
310326 lock-offset = <0x20>;
311327 vco-offset = <0x1c>;
arch/arm/boot/dts/arm-realview-pb11mp.dts+33−15
@@ -303,114 +303,132 @@ · 302 unmodified lines
303303 pb11mp_syscon: syscon@10000000 {
304304 compatible = "arm,realview-pb11mp-syscon", "syscon", "simple-mfd";
305305 reg = <0x10000000 0x1000>;
306+ ranges = <0x0 0x10000000 0x1000>;
307+ #address-cells = <1>;
308+ #size-cells = <1>;
306309
307− led@08.0 {
310+ led@8,0 {
308311 compatible = "register-bit-led";
312+ reg = <0x08 0x04>;
309313 offset = <0x08>;
310314 mask = <0x01>;
311315 label = "versatile:0";
312316 linux,default-trigger = "heartbeat";
313317 default-state = "on";
314318 };
315− led@08.1 {
319+ led@8,1 {
316320 compatible = "register-bit-led";
321+ reg = <0x08 0x04>;
317322 offset = <0x08>;
318323 mask = <0x02>;
319324 label = "versatile:1";
320325 linux,default-trigger = "mmc0";
321326 default-state = "off";
322327 };
323− led@08.2 {
328+ led@8,2 {
324329 compatible = "register-bit-led";
330+ reg = <0x08 0x04>;
325331 offset = <0x08>;
326332 mask = <0x04>;
327333 label = "versatile:2";
328334 linux,default-trigger = "cpu0";
329335 default-state = "off";
330336 };
331− led@08.3 {
337+ led@8,3 {
332338 compatible = "register-bit-led";
339+ reg = <0x08 0x04>;
333340 offset = <0x08>;
334341 mask = <0x08>;
335342 label = "versatile:3";
336343 linux,default-trigger = "cpu1";
337344 default-state = "off";
338345 };
339− led@08.4 {
346+ led@8,4 {
340347 compatible = "register-bit-led";
348+ reg = <0x08 0x04>;
341349 offset = <0x08>;
342350 mask = <0x10>;
343351 label = "versatile:4";
344352 linux,default-trigger = "cpu2";
345353 default-state = "off";
346354 };
347− led@08.5 {
355+ led@8,5 {
348356 compatible = "register-bit-led";
357+ reg = <0x08 0x04>;
349358 offset = <0x08>;
350359 mask = <0x20>;
351360 label = "versatile:5";
352361 linux,default-trigger = "cpu3";
353362 default-state = "off";
354363 };
355− led@08.6 {
364+ led@8,6 {
356365 compatible = "register-bit-led";
366+ reg = <0x08 0x04>;
357367 offset = <0x08>;
358368 mask = <0x40>;
359369 label = "versatile:6";
360370 default-state = "off";
361371 };
362− led@08.7 {
372+ led@8,7 {
363373 compatible = "register-bit-led";
374+ reg = <0x08 0x04>;
364375 offset = <0x08>;
365376 mask = <0x80>;
366377 label = "versatile:7";
367378 default-state = "off";
368379 };
369380
370− oscclk0: osc0@0c {
381+ oscclk0: clock-controller@c {
371382 compatible = "arm,syscon-icst307";
383+ reg = <0x0c 0x04>;
372384 #clock-cells = <0>;
373385 lock-offset = <0x20>;
374386 vco-offset = <0x0C>;
375387 clocks = <&xtal24mhz>;
376388 };
377− oscclk1: osc1@10 {
389+ oscclk1: clock-controller@10 {
378390 compatible = "arm,syscon-icst307";
391+ reg = <0x10 0x04>;
379392 #clock-cells = <0>;
380393 lock-offset = <0x20>;
381394 vco-offset = <0x10>;
382395 clocks = <&xtal24mhz>;
383396 };
384− oscclk2: osc2@14 {
397+ oscclk2: clock-controller@14 {
385398 compatible = "arm,syscon-icst307";
399+ reg = <0x14 0x04>;
386400 #clock-cells = <0>;
387401 lock-offset = <0x20>;
388402 vco-offset = <0x14>;
389403 clocks = <&xtal24mhz>;
390404 };
391− oscclk3: osc3@18 {
405+ oscclk3: clock-controller@18 {
392406 compatible = "arm,syscon-icst307";
407+ reg = <0x18 0x04>;
393408 #clock-cells = <0>;
394409 lock-offset = <0x20>;
395410 vco-offset = <0x18>;
396411 clocks = <&xtal24mhz>;
397412 };
398− oscclk4: osc4@1c {
413+ oscclk4: clock-controller@1c {
399414 compatible = "arm,syscon-icst307";
415+ reg = <0x1c 0x04>;
400416 #clock-cells = <0>;
401417 lock-offset = <0x20>;
402418 vco-offset = <0x1c>;
403419 clocks = <&xtal24mhz>;
404420 };
405− oscclk5: osc5@d4 {
421+ oscclk5: clock-controller@d4 {
406422 compatible = "arm,syscon-icst307";
423+ reg = <0xd4 0x04>;
407424 #clock-cells = <0>;
408425 lock-offset = <0x20>;
409426 vco-offset = <0xd4>;
410427 clocks = <&xtal24mhz>;
411428 };
412− oscclk6: osc6@d8 {
429+ oscclk6: clock-controller@d8 {
413430 compatible = "arm,syscon-icst307";
431+ reg = <0xd8 0x04>;
414432 #clock-cells = <0>;
415433 lock-offset = <0x20>;
416434 vco-offset = <0xd8>;
arch/arm/boot/dts/arm-realview-pbx.dtsi+29−13
@@ -220,96 +220,112 @@ · 219 unmodified lines
220220 syscon: syscon@10000000 {
221221 compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
222222 reg = <0x10000000 0x1000>;
223+ ranges = <0x0 0x10000000 0x1000>;
224+ #address-cells = <1>;
225+ #size-cells = <1>;
223226
224− led@08.0 {
227+ led@8,0 {
225228 compatible = "register-bit-led";
229+ reg = <0x08 0x04>;
226230 offset = <0x08>;
227231 mask = <0x01>;
228232 label = "versatile:0";
229233 linux,default-trigger = "heartbeat";
230234 default-state = "on";
231235 };
232− led@08.1 {
236+ led@8,1 {
233237 compatible = "register-bit-led";
238+ reg = <0x08 0x04>;
234239 offset = <0x08>;
235240 mask = <0x02>;
236241 label = "versatile:1";
237242 linux,default-trigger = "mmc0";
238243 default-state = "off";
239244 };
240− led@08.2 {
245+ led@8,2 {
241246 compatible = "register-bit-led";
247+ reg = <0x08 0x04>;
242248 offset = <0x08>;
243249 mask = <0x04>;
244250 label = "versatile:2";
245251 linux,default-trigger = "cpu0";
246252 default-state = "off";
247253 };
248− led@08.3 {
254+ led@8,3 {
249255 compatible = "register-bit-led";
256+ reg = <0x08 0x04>;
250257 offset = <0x08>;
251258 mask = <0x08>;
252259 label = "versatile:3";
253260 default-state = "off";
254261 };
255− led@08.4 {
262+ led@8,4 {
256263 compatible = "register-bit-led";
264+ reg = <0x08 0x04>;
257265 offset = <0x08>;
258266 mask = <0x10>;
259267 label = "versatile:4";
260268 default-state = "off";
261269 };
262− led@08.5 {
270+ led@8,5 {
263271 compatible = "register-bit-led";
272+ reg = <0x08 0x04>;
264273 offset = <0x08>;
265274 mask = <0x20>;
266275 label = "versatile:5";
267276 default-state = "off";
268277 };
269− led@08.6 {
278+ led@8,6 {
270279 compatible = "register-bit-led";
280+ reg = <0x08 0x04>;
271281 offset = <0x08>;
272282 mask = <0x40>;
273283 label = "versatile:6";
274284 default-state = "off";
275285 };
276− led@08.7 {
286+ led@8,7 {
277287 compatible = "register-bit-led";
288+ reg = <0x08 0x04>;
278289 offset = <0x08>;
279290 mask = <0x80>;
280291 label = "versatile:7";
281292 default-state = "off";
282293 };
283− oscclk0: osc0@0c {
294+ oscclk0: clock-controller@c {
284295 compatible = "arm,syscon-icst307";
296+ reg = <0x0c 0x04>;
285297 #clock-cells = <0>;
286298 lock-offset = <0x20>;
287299 vco-offset = <0x0C>;
288300 clocks = <&xtal24mhz>;
289301 };
290− oscclk1: osc1@10 {
302+ oscclk1: clock-controller@10 {
291303 compatible = "arm,syscon-icst307";
304+ reg = <0x10 0x04>;
292305 #clock-cells = <0>;
293306 lock-offset = <0x20>;
294307 vco-offset = <0x10>;
295308 clocks = <&xtal24mhz>;
296309 };
297− oscclk2: osc2@14 {
310+ oscclk2: clock-controller@14 {
298311 compatible = "arm,syscon-icst307";
312+ reg = <0x14 0x04>;
299313 #clock-cells = <0>;
300314 lock-offset = <0x20>;
301315 vco-offset = <0x14>;
302316 clocks = <&xtal24mhz>;
303317 };
304− oscclk3: osc3@18 {
318+ oscclk3: clock-controller@18 {
305319 compatible = "arm,syscon-icst307";
320+ reg = <0x18 0x04>;
306321 #clock-cells = <0>;
307322 lock-offset = <0x20>;
308323 vco-offset = <0x18>;
309324 clocks = <&xtal24mhz>;
310325 };
311− oscclk4: osc4@1c {
326+ oscclk4: clock-controller@1c {
312327 compatible = "arm,syscon-icst307";
328+ reg = <0x1c 0x04>;
313329 #clock-cells = <0>;
314330 lock-offset = <0x20>;
315331 vco-offset = <0x1c>;
arch/arm/boot/dts/armada-381-netgear-gs110emx.dts+295−0
@@ -0,0 +1,295 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/* Copyright (c) 2021, Marcel Ziswiler <marcel@ziswiler.com> */
3+
4+/dts-v1/;
5+#include "armada-385.dtsi"
6+#include <dt-bindings/gpio/gpio.h>
7+#include <dt-bindings/input/input.h>
8+
9+/ {
10+ model = "Netgear GS110EMX";
11+ compatible = "netgear,gs110emx", "marvell,armada380";
12+
13+ aliases {
14+ /* So that mvebu u-boot can update the MAC addresses */
15+ ethernet1 = &eth0;
16+ };
17+
18+ chosen {
19+ stdout-path = "serial0:115200n8";
20+ };
21+
22+ gpio-keys {
23+ compatible = "gpio-keys";
24+ pinctrl-0 = <&front_button_pins>;
25+ pinctrl-names = "default";
26+
27+ factory_default {
28+ label = "Factory Default";
29+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
30+ linux,code = <KEY_RESTART>;
31+ };
32+ };
33+
34+ memory {
35+ device_type = "memory";
36+ reg = <0x00000000 0x08000000>; /* 128 MB */
37+ };
38+
39+ soc {
40+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
41+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
42+ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
43+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
44+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
45+
46+ internal-regs {
47+ rtc@a3800 {
48+ /*
49+ * If the rtc doesn't work, run "date reset"
50+ * twice in u-boot.
51+ */
52+ status = "okay";
53+ };
54+ };
55+ };
56+};
57+
58+&eth0 {
59+ /* ethernet@70000 */
60+ bm,pool-long = <0>;
61+ bm,pool-short = <1>;
62+ buffer-manager = <&bm>;
63+ phy-mode = "rgmii-id";
64+ pinctrl-0 = <&ge0_rgmii_pins>;
65+ pinctrl-names = "default";
66+ status = "okay";
67+
68+ fixed-link {
69+ full-duplex;
70+ pause;
71+ speed = <1000>;
72+ };
73+};
74+
75+&mdio {
76+ pinctrl-names = "default";
77+ pinctrl-0 = <&mdio_pins>;
78+ status = "okay";
79+
80+ switch@0 {
81+ compatible = "marvell,mv88e6190";
82+ #address-cells = <1>;
83+ #interrupt-cells = <2>;
84+ interrupt-controller;
85+ interrupt-parent = <&gpio1>;
86+ interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
87+ pinctrl-0 = <&switch_interrupt_pins>;
88+ pinctrl-names = "default";
89+ #size-cells = <0>;
90+ reg = <0>;
91+
92+ mdio {
93+ #address-cells = <1>;
94+ #size-cells = <0>;
95+
96+ switch0phy1: switch0phy1@1 {
97+ reg = <0x1>;
98+ };
99+
100+ switch0phy2: switch0phy2@2 {
101+ reg = <0x2>;
102+ };
103+
104+ switch0phy3: switch0phy3@3 {
105+ reg = <0x3>;
106+ };
107+
108+ switch0phy4: switch0phy4@4 {
109+ reg = <0x4>;
110+ };
111+
112+ switch0phy5: switch0phy5@5 {
113+ reg = <0x5>;
114+ };
115+
116+ switch0phy6: switch0phy6@6 {
117+ reg = <0x6>;
118+ };
119+
120+ switch0phy7: switch0phy7@7 {
121+ reg = <0x7>;
122+ };
123+
124+ switch0phy8: switch0phy8@8 {
125+ reg = <0x8>;
126+ };
127+ };
128+
129+ mdio-external {
130+ compatible = "marvell,mv88e6xxx-mdio-external";
131+ #address-cells = <1>;
132+ #size-cells = <0>;
133+
134+ phy1: ethernet-phy@b {
135+ reg = <0xb>;
136+ compatible = "ethernet-phy-ieee802.3-c45";
137+ };
138+
139+ phy2: ethernet-phy@c {
140+ reg = <0xc>;
141+ compatible = "ethernet-phy-ieee802.3-c45";
142+ };
143+ };
144+
145+ ports {
146+ #address-cells = <1>;
147+ #size-cells = <0>;
148+
149+ port@0 {
150+ ethernet = <&eth0>;
151+ label = "cpu";
152+ reg = <0>;
153+
154+ fixed-link {
155+ full-duplex;
156+ pause;
157+ speed = <1000>;
158+ };
159+ };
160+
161+ port@1 {
162+ label = "lan1";
163+ phy-handle = <&switch0phy1>;
164+ reg = <1>;
165+ };
166+
167+ port@2 {
168+ label = "lan2";
169+ phy-handle = <&switch0phy2>;
170+ reg = <2>;
171+ };
172+
173+ port@3 {
174+ label = "lan3";
175+ phy-handle = <&switch0phy3>;
176+ reg = <3>;
177+ };
178+
179+ port@4 {
180+ label = "lan4";
181+ phy-handle = <&switch0phy4>;
182+ reg = <4>;
183+ };
184+
185+ port@5 {
186+ label = "lan5";
187+ phy-handle = <&switch0phy5>;
188+ reg = <5>;
189+ };
190+
191+ port@6 {
192+ label = "lan6";
193+ phy-handle = <&switch0phy6>;
194+ reg = <6>;
195+ };
196+
197+ port@7 {
198+ label = "lan7";
199+ phy-handle = <&switch0phy7>;
200+ reg = <7>;
201+ };
202+
203+ port@8 {
204+ label = "lan8";
205+ phy-handle = <&switch0phy8>;
206+ reg = <8>;
207+ };
208+
209+ port@9 {
210+ /* 88X3310P external phy */
211+ label = "lan9";
212+ phy-handle = <&phy1>;
213+ phy-mode = "xaui";
214+ reg = <9>;
215+ };
216+
217+ port@a {
218+ /* 88X3310P external phy */
219+ label = "lan10";
220+ phy-handle = <&phy2>;
221+ phy-mode = "xaui";
222+ reg = <0xa>;
223+ };
224+ };
225+ };
226+};
227+
228+&pinctrl {
229+ front_button_pins: front-button-pins {
230+ marvell,pins = "mpp38";
231+ marvell,function = "gpio";
232+ };
233+
234+ switch_interrupt_pins: switch-interrupt-pins {
235+ marvell,pins = "mpp39";
236+ marvell,function = "gpio";
237+ };
238+};
239+
240+&spi0 {
241+ pinctrl-0 = <&spi0_pins>;
242+ pinctrl-names = "default";
243+ status = "okay";
244+
245+ spi-flash@0 {
246+ #address-cells = <1>;
247+ #size-cells = <1>;
248+ compatible = "jedec,spi-nor";
249+ reg = <0>; /* Chip select 0 */
250+ spi-max-frequency = <3000000>;
251+
252+ partitions {
253+ compatible = "fixed-partitions";
254+ #address-cells = <1>;
255+ #size-cells = <1>;
256+
257+ partition@0 {
258+ label = "boot";
259+ read-only;
260+ reg = <0x00000000 0x00100000>;
261+ };
262+
263+ partition@100000 {
264+ label = "env";
265+ reg = <0x00100000 0x00010000>;
266+ };
267+
268+ partition@200000 {
269+ label = "rsv";
270+ reg = <0x00110000 0x00010000>;
271+ };
272+
273+ partition@300000 {
274+ label = "image0";
275+ reg = <0x00120000 0x00900000>;
276+ };
277+
278+ partition@400000 {
279+ label = "config";
280+ reg = <0x00a20000 0x00300000>;
281+ };
282+
283+ partition@480000 {
284+ label = "debug";
285+ reg = <0x00d20000 0x002e0000>;
286+ };
287+ };
288+ };
289+};
290+
291+&uart0 {
292+ pinctrl-0 = <&uart0_pins>;
293+ pinctrl-names = "default";
294+ status = "okay";
295+};
arch/arm/boot/dts/aspeed-bmc-amd-ethanolx.dts+5−0
@@ -159,6 +159,11 @@ · 158 unmodified lines
159159 //24LC128 EEPROM
160160 &i2c3 {
161161 status = "okay";
162+ eeprom@50 {
163+ compatible = "atmel,24c256";
164+ reg = <0x50>;
165+ pagesize = <64>;
166+ };
162167 };
163168
164169 //P0 Power regulators
arch/arm/boot/dts/aspeed-bmc-ampere-mtjade.dts+20−1
@@ -86,6 +86,18 @@ · 85 unmodified lines
8686 linux,code = <ASPEED_GPIO(J, 1)>;
8787 };
8888
89+ S0_scp_auth_fail {
90+ label = "S0_SCP_AUTH_FAIL";
91+ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
92+ linux,code = <ASPEED_GPIO(J, 2)>;
93+ };
94+
95+ S1_scp_auth_fail {
96+ label = "S1_SCP_AUTH_FAIL";
97+ gpios = <&gpio ASPEED_GPIO(Z, 5) GPIO_ACTIVE_LOW>;
98+ linux,code = <ASPEED_GPIO(Z, 5)>;
99+ };
100+
89101 S1_overtemp {
90102 label = "S1_OVERTEMP";
91103 gpios = <&gpio ASPEED_GPIO(Z, 6) GPIO_ACTIVE_LOW>;
@@ -590,7 +602,7 @@ · 498 unmodified lines
590602 /*Q0-Q7*/ "","","","","","UID_BUTTON","","",
591603 /*R0-R7*/ "","","BMC_EXT_HIGHTEMP_L","OCP_AUX_PWREN",
592604 "OCP_MAIN_PWREN","RESET_BUTTON","","",
593− /*S0-S7*/ "","","","","","","","",
605+ /*S0-S7*/ "","","","","RTC_BAT_SEN_EN","","","",
594606 /*T0-T7*/ "","","","","","","","",
595607 /*U0-U7*/ "","","","","","","","",
596608 /*V0-V7*/ "","","","","","","","",
@@ -604,4 +616,11 @@ · 7 unmodified lines
604616 "S1_BMC_DDR_ADR","","","","",
605617 /*AC0-AC7*/ "SYS_PWR_GD","","","","","BMC_READY","SLAVE_PRESENT_L",
606618 "BMC_OCP_PG";
619+
620+ i2c4_o_en {
621+ gpio-hog;
622+ gpios = <ASPEED_GPIO(Y, 2) GPIO_ACTIVE_HIGH>;
623+ output-high;
624+ line-name = "BMC_I2C4_O_EN";
625+ };
607626 };
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts+223−660
@@ -96,6 +96,20 @@ · 95 unmodified lines
9696 i2c32 = &i2c14mux1chn1;
9797 i2c33 = &i2c14mux1chn2;
9898 i2c34 = &i2c14mux1chn3;
99+ i2c35 = &i2c15mux0chn0;
100+ i2c36 = &i2c15mux0chn1;
101+ i2c37 = &i2c15mux0chn2;
102+ i2c38 = &i2c15mux0chn3;
103+ i2c39 = &i2c15mux1chn0;
104+ i2c40 = &i2c15mux1chn1;
105+ i2c41 = &i2c15mux1chn2;
106+ i2c42 = &i2c15mux1chn3;
107+ i2c43 = &i2c15mux2chn0;
108+ i2c44 = &i2c15mux2chn1;
109+ i2c45 = &i2c15mux2chn2;
110+ i2c46 = &i2c15mux2chn3;
111+ i2c47 = &i2c8mux0chn0;
112+ i2c48 = &i2c8mux0chn1;
99113
100114 serial4 = &uart5;
101115
@@ -231,20 +245,36 @@ · 129 unmodified lines
231245 gpios = <&gpio0 ASPEED_GPIO(P, 4) GPIO_ACTIVE_LOW>;
232246 };
233247 };
248+
249+ iio-hwmon-battery {
250+ compatible = "iio-hwmon";
251+ io-channels = <&adc1 7>;
252+ };
253+};
254+
255+&adc1 {
256+ status = "okay";
257+ aspeed,int-vref-microvolt = <2500000>;
258+ pinctrl-names = "default";
259+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
260+ &pinctrl_adc10_default &pinctrl_adc11_default
261+ &pinctrl_adc12_default &pinctrl_adc13_default
262+ &pinctrl_adc14_default &pinctrl_adc15_default>;
234263 };
235264
236265 &gpio0 {
237266 gpio-line-names =
238267 /*A0-A7*/ "","","","","","","","",
239− /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","","",
268+ /*B0-B7*/ "USERSPACE_RSTIND_BUFF","","","","","","checkstop","",
240269 /*C0-C7*/ "","","","","","","","",
241270 /*D0-D7*/ "","","","","","","","",
242271 /*E0-E7*/ "","","","","","","","",
243272 /*F0-F7*/ "PIN_HOLE_RESET_IN_N","","",
244− "PIN_HOLE_RESET_OUT_N","","","","",
273+ "PIN_HOLE_RESET_OUT_N","","",
274+ "factory-reset-toggle","",
245275 /*G0-G7*/ "","","","","","","","",
246276 /*H0-H7*/ "led-rtc-battery","led-bmc","led-rear-enc-id0","led-rear-enc-fault0","","","","",
247− /*I0-I7*/ "","","","","","","","",
277+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
248278 /*J0-J7*/ "","","","","","","","",
249279 /*K0-K7*/ "","","","","","","","",
250280 /*L0-L7*/ "","","","","","","","",
@@ -252,7 +282,7 @@ · 1 unmodified line
252282 /*N0-N7*/ "","","","","","","","",
253283 /*O0-O7*/ "","","","","","","","",
254284 /*P0-P7*/ "","","","","led-pcieslot-power","","","",
255− /*Q0-Q7*/ "","","","","","","","",
285+ /*Q0-Q7*/ "","","regulator-standby-faulted","","","","","",
256286 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","I2C_FLASH_MICRO_N","","",
257287 /*S0-S7*/ "","","","","","","","",
258288 /*T0-T7*/ "","","","","","","","",
@@ -297,86 +327,6 @@ · 38 unmodified lines
297327 "presence-lcd-op",
298328 "presence-base-op",
299329 "";
300−
301− gpio@0 {
302− reg = <0>;
303− type = <PCA955X_TYPE_GPIO>;
304− };
305−
306− gpio@1 {
307− reg = <1>;
308− type = <PCA955X_TYPE_GPIO>;
309− };
310−
311− gpio@2 {
312− reg = <2>;
313− type = <PCA955X_TYPE_GPIO>;
314− };
315−
316− gpio@3 {
317− reg = <3>;
318− type = <PCA955X_TYPE_GPIO>;
319− };
320−
321− gpio@4 {
322− reg = <4>;
323− type = <PCA955X_TYPE_GPIO>;
324− };
325−
326− gpio@5 {
327− reg = <5>;
328− type = <PCA955X_TYPE_GPIO>;
329− };
330−
331− gpio@6 {
332− reg = <6>;
333− type = <PCA955X_TYPE_GPIO>;
334− };
335−
336− gpio@7 {
337− reg = <7>;
338− type = <PCA955X_TYPE_GPIO>;
339− };
340−
341− gpio@8 {
342− reg = <8>;
343− type = <PCA955X_TYPE_GPIO>;
344− };
345−
346− gpio@9 {
347− reg = <9>;
348− type = <PCA955X_TYPE_GPIO>;
349− };
350−
351− gpio@10 {
352− reg = <10>;
353− type = <PCA955X_TYPE_GPIO>;
354− };
355−
356− gpio@11 {
357− reg = <11>;
358− type = <PCA955X_TYPE_GPIO>;
359− };
360−
361− gpio@12 {
362− reg = <12>;
363− type = <PCA955X_TYPE_GPIO>;
364− };
365−
366− gpio@13 {
367− reg = <13>;
368− type = <PCA955X_TYPE_GPIO>;
369− };
370−
371− gpio@14 {
372− reg = <14>;
373− type = <PCA955X_TYPE_GPIO>;
374− };
375−
376− gpio@15 {
377− reg = <15>;
378− type = <PCA955X_TYPE_GPIO>;
379− };
380330 };
381331 };
382332
@@ -440,56 +390,6 @@ · 57 unmodified lines
440390 "expander-cable-card3",
441391 "expander-cable-card4",
442392 "expander-cable-card5";
443−
444− gpio@0 {
445− reg = <0>;
446− type = <PCA955X_TYPE_GPIO>;
447− };
448−
449− gpio@1 {
450− reg = <1>;
451− type = <PCA955X_TYPE_GPIO>;
452− };
453−
454− gpio@2 {
455− reg = <2>;
456− type = <PCA955X_TYPE_GPIO>;
457− };
458−
459− gpio@3 {
460− reg = <3>;
461− type = <PCA955X_TYPE_GPIO>;
462− };
463−
464− gpio@4 {
465− reg = <4>;
466− type = <PCA955X_TYPE_GPIO>;
467− };
468−
469− gpio@5 {
470− reg = <5>;
471− type = <PCA955X_TYPE_GPIO>;
472− };
473−
474− gpio@6 {
475− reg = <6>;
476− type = <PCA955X_TYPE_GPIO>;
477− };
478−
479− gpio@7 {
480− reg = <7>;
481− type = <PCA955X_TYPE_GPIO>;
482− };
483−
484− gpio@8 {
485− reg = <8>;
486− type = <PCA955X_TYPE_GPIO>;
487− };
488−
489− gpio@9 {
490− reg = <9>;
491− type = <PCA955X_TYPE_GPIO>;
492− };
493393 };
494394
495395 i2c-switch@70 {
@@ -533,36 +433,6 @@ · 37 unmodified lines
533433 default-state = "keep";
534434 type = <PCA955X_TYPE_LED>;
535435 };
536−
537− gpio@2 {
538− reg = <2>;
539− type = <PCA955X_TYPE_GPIO>;
540− };
541−
542− gpio@3 {
543− reg = <3>;
544− type = <PCA955X_TYPE_GPIO>;
545− };
546−
547− gpio@4 {
548− reg = <4>;
549− type = <PCA955X_TYPE_GPIO>;
550− };
551−
552− gpio@5 {
553− reg = <5>;
554− type = <PCA955X_TYPE_GPIO>;
555− };
556−
557− gpio@6 {
558− reg = <6>;
559− type = <PCA955X_TYPE_GPIO>;
560− };
561−
562− gpio@7 {
563− reg = <7>;
564− type = <PCA955X_TYPE_GPIO>;
565− };
566436 };
567437 };
568438
@@ -599,36 +469,6 @@ · 30 unmodified lines
599469 default-state = "keep";
600470 type = <PCA955X_TYPE_LED>;
601471 };
602−
603− gpio@2 {
604− reg = <2>;
605− type = <PCA955X_TYPE_GPIO>;
606− };
607−
608− gpio@3 {
609− reg = <3>;
610− type = <PCA955X_TYPE_GPIO>;
611− };
612−
613− gpio@4 {
614− reg = <4>;
615− type = <PCA955X_TYPE_GPIO>;
616− };
617−
618− gpio@5 {
619− reg = <5>;
620− type = <PCA955X_TYPE_GPIO>;
621− };
622−
623− gpio@6 {
624− reg = <6>;
625− type = <PCA955X_TYPE_GPIO>;
626− };
627−
628− gpio@7 {
629− reg = <7>;
630− type = <PCA955X_TYPE_GPIO>;
631− };
632472 };
633473 };
634474
@@ -665,36 +505,6 @@ · 30 unmodified lines
665505 default-state = "keep";
666506 type = <PCA955X_TYPE_LED>;
667507 };
668−
669− gpio@2 {
670− reg = <2>;
671− type = <PCA955X_TYPE_GPIO>;
672− };
673−
674− gpio@3 {
675− reg = <3>;
676− type = <PCA955X_TYPE_GPIO>;
677− };
678−
679− gpio@4 {
680− reg = <4>;
681− type = <PCA955X_TYPE_GPIO>;
682− };
683−
684− gpio@5 {
685− reg = <5>;
686− type = <PCA955X_TYPE_GPIO>;
687− };
688−
689− gpio@6 {
690− reg = <6>;
691− type = <PCA955X_TYPE_GPIO>;
692− };
693−
694− gpio@7 {
695− reg = <7>;
696− type = <PCA955X_TYPE_GPIO>;
697− };
698508 };
699509 };
700510 };
@@ -725,67 +535,6 @@ · 24 unmodified lines
725535 "expander-cable-card9",
726536 "expander-cable-card10",
727537 "expander-cable-card11";
728−
729− gpio@0 {
730− reg = <0>;
731− type = <PCA955X_TYPE_GPIO>;
732− };
733−
734− gpio@1 {
735− reg = <1>;
736− type = <PCA955X_TYPE_GPIO>;
737− };
738−
739− gpio@2 {
740− reg = <2>;
741− type = <PCA955X_TYPE_GPIO>;
742− };
743−
744− gpio@3 {
745− reg = <3>;
746− type = <PCA955X_TYPE_GPIO>;
747− };
748−
749− gpio@4 {
750− reg = <4>;
751− type = <PCA955X_TYPE_GPIO>;
752− };
753−
754− gpio@5 {
755− reg = <5>;
756− type = <PCA955X_TYPE_GPIO>;
757− };
758−
759− gpio@6 {
760− reg = <6>;
761− type = <PCA955X_TYPE_GPIO>;
762− };
763−
764− gpio@7 {
765− reg = <7>;
766− type = <PCA955X_TYPE_GPIO>;
767− };
768−
769− gpio@8 {
770− reg = <8>;
771− type = <PCA955X_TYPE_GPIO>;
772− };
773−
774− gpio@9 {
775− reg = <9>;
776− type = <PCA955X_TYPE_GPIO>;
777− };
778−
779− gpio@10 {
780− reg = <10>;
781− type = <PCA955X_TYPE_GPIO>;
782− };
783−
784− gpio@11 {
785− reg = <11>;
786− type = <PCA955X_TYPE_GPIO>;
787− };
788−
789538 };
790539
791540 i2c-switch@70 {
@@ -829,36 +578,6 @@ · 37 unmodified lines
829578 default-state = "keep";
830579 type = <PCA955X_TYPE_LED>;
831580 };
832−
833− gpio@2 {
834− reg = <2>;
835− type = <PCA955X_TYPE_GPIO>;
836− };
837−
838− gpio@3 {
839− reg = <3>;
840− type = <PCA955X_TYPE_GPIO>;
841− };
842−
843− gpio@4 {
844− reg = <4>;
845− type = <PCA955X_TYPE_GPIO>;
846− };
847−
848− gpio@5 {
849− reg = <5>;
850− type = <PCA955X_TYPE_GPIO>;
851− };
852−
853− gpio@6 {
854− reg = <6>;
855− type = <PCA955X_TYPE_GPIO>;
856− };
857−
858− gpio@7 {
859− reg = <7>;
860− type = <PCA955X_TYPE_GPIO>;
861− };
862581 };
863582 };
864583
@@ -895,36 +614,6 @@ · 30 unmodified lines
895614 default-state = "keep";
896615 type = <PCA955X_TYPE_LED>;
897616 };
898−
899− gpio@2 {
900− reg = <2>;
901− type = <PCA955X_TYPE_GPIO>;
902− };
903−
904− gpio@3 {
905− reg = <3>;
906− type = <PCA955X_TYPE_GPIO>;
907− };
908−
909− gpio@4 {
910− reg = <4>;
911− type = <PCA955X_TYPE_GPIO>;
912− };
913−
914− gpio@5 {
915− reg = <5>;
916− type = <PCA955X_TYPE_GPIO>;
917− };
918−
919− gpio@6 {
920− reg = <6>;
921− type = <PCA955X_TYPE_GPIO>;
922− };
923−
924− gpio@7 {
925− reg = <7>;
926− type = <PCA955X_TYPE_GPIO>;
927− };
928617 };
929618 };
930619
@@ -961,36 +650,6 @@ · 30 unmodified lines
961650 default-state = "keep";
962651 type = <PCA955X_TYPE_LED>;
963652 };
964−
965− gpio@2 {
966− reg = <2>;
967− type = <PCA955X_TYPE_GPIO>;
968− };
969−
970− gpio@3 {
971− reg = <3>;
972− type = <PCA955X_TYPE_GPIO>;
973− };
974−
975− gpio@4 {
976− reg = <4>;
977− type = <PCA955X_TYPE_GPIO>;
978− };
979−
980− gpio@5 {
981− reg = <5>;
982− type = <PCA955X_TYPE_GPIO>;
983− };
984−
985− gpio@6 {
986− reg = <6>;
987− type = <PCA955X_TYPE_GPIO>;
988− };
989−
990− gpio@7 {
991− reg = <7>;
992− type = <PCA955X_TYPE_GPIO>;
993− };
994653 };
995654 };
996655
@@ -1027,36 +686,6 @@ · 30 unmodified lines
1027686 default-state = "keep";
1028687 type = <PCA955X_TYPE_LED>;
1029688 };
1030−
1031− gpio@2 {
1032− reg = <2>;
1033− type = <PCA955X_TYPE_GPIO>;
1034− };
1035−
1036− gpio@3 {
1037− reg = <3>;
1038− type = <PCA955X_TYPE_GPIO>;
1039− };
1040−
1041− gpio@4 {
1042− reg = <4>;
1043− type = <PCA955X_TYPE_GPIO>;
1044− };
1045−
1046− gpio@5 {
1047− reg = <5>;
1048− type = <PCA955X_TYPE_GPIO>;
1049− };
1050−
1051− gpio@6 {
1052− reg = <6>;
1053− type = <PCA955X_TYPE_GPIO>;
1054− };
1055−
1056− gpio@7 {
1057− reg = <7>;
1058− type = <PCA955X_TYPE_GPIO>;
1059− };
1060689 };
1061690 };
1062691 };
@@ -1106,36 +735,6 @@ · 43 unmodified lines
1106735 default-state = "keep";
1107736 type = <PCA955X_TYPE_LED>;
1108737 };
1109−
1110− gpio@2 {
1111− reg = <2>;
1112− type = <PCA955X_TYPE_GPIO>;
1113− };
1114−
1115− gpio@3 {
1116− reg = <3>;
1117− type = <PCA955X_TYPE_GPIO>;
1118− };
1119−
1120− gpio@4 {
1121− reg = <4>;
1122− type = <PCA955X_TYPE_GPIO>;
1123− };
1124−
1125− gpio@5 {
1126− reg = <5>;
1127− type = <PCA955X_TYPE_GPIO>;
1128− };
1129−
1130− gpio@6 {
1131− reg = <6>;
1132− type = <PCA955X_TYPE_GPIO>;
1133− };
1134−
1135− gpio@7 {
1136− reg = <7>;
1137− type = <PCA955X_TYPE_GPIO>;
1138− };
1139738 };
1140739 };
1141740
@@ -1172,36 +771,6 @@ · 30 unmodified lines
1172771 default-state = "keep";
1173772 type = <PCA955X_TYPE_LED>;
1174773 };
1175−
1176− gpio@2 {
1177− reg = <2>;
1178− type = <PCA955X_TYPE_GPIO>;
1179− };
1180−
1181− gpio@3 {
1182− reg = <3>;
1183− type = <PCA955X_TYPE_GPIO>;
1184− };
1185−
1186− gpio@4 {
1187− reg = <4>;
1188− type = <PCA955X_TYPE_GPIO>;
1189− };
1190−
1191− gpio@5 {
1192− reg = <5>;
1193− type = <PCA955X_TYPE_GPIO>;
1194− };
1195−
1196− gpio@6 {
1197− reg = <6>;
1198− type = <PCA955X_TYPE_GPIO>;
1199− };
1200−
1201− gpio@7 {
1202− reg = <7>;
1203− type = <PCA955X_TYPE_GPIO>;
1204− };
1205774 };
1206775 };
1207776
@@ -1233,40 +802,10 @@ · 25 unmodified lines
1233802
1234803 led@1 {
1235804 label = "cablecard-c10-cxp-bot";
1236− reg = <1>;
1237− retain-state-shutdown;
1238− default-state = "keep";
1239− type = <PCA955X_TYPE_LED>;
1240− };
1241−
1242− gpio@2 {
1243− reg = <2>;
1244− type = <PCA955X_TYPE_GPIO>;
1245− };
1246−
1247− gpio@3 {
1248− reg = <3>;
1249− type = <PCA955X_TYPE_GPIO>;
1250− };
1251−
1252− gpio@4 {
1253− reg = <4>;
1254− type = <PCA955X_TYPE_GPIO>;
1255− };
1256−
1257− gpio@5 {
1258− reg = <5>;
1259− type = <PCA955X_TYPE_GPIO>;
1260− };
1261−
1262− gpio@6 {
1263− reg = <6>;
1264− type = <PCA955X_TYPE_GPIO>;
1265− };
1266−
1267− gpio@7 {
1268− reg = <7>;
1269− type = <PCA955X_TYPE_GPIO>;
805+ reg = <1>;
806+ retain-state-shutdown;
807+ default-state = "keep";
808+ type = <PCA955X_TYPE_LED>;
1270809 };
1271810 };
1272811 };
@@ -1304,36 +843,6 @@ · 31 unmodified lines
1304843 default-state = "keep";
1305844 type = <PCA955X_TYPE_LED>;
1306845 };
1307−
1308− gpio@2 {
1309− reg = <2>;
1310− type = <PCA955X_TYPE_GPIO>;
1311− };
1312−
1313− gpio@3 {
1314− reg = <3>;
1315− type = <PCA955X_TYPE_GPIO>;
1316− };
1317−
1318− gpio@4 {
1319− reg = <4>;
1320− type = <PCA955X_TYPE_GPIO>;
1321− };
1322−
1323− gpio@5 {
1324− reg = <5>;
1325− type = <PCA955X_TYPE_GPIO>;
1326− };
1327−
1328− gpio@6 {
1329− reg = <6>;
1330− type = <PCA955X_TYPE_GPIO>;
1331− };
1332−
1333− gpio@7 {
1334− reg = <7>;
1335− type = <PCA955X_TYPE_GPIO>;
1336− };
1337846 };
1338847 };
1339848 };
@@ -1347,11 +856,6 @@ · 7 unmodified lines
1347856 gpio-controller;
1348857 #gpio-cells = <2>;
1349858
1350− gpio@0 {
1351− reg = <0>;
1352− type = <PCA955X_TYPE_GPIO>;
1353− };
1354−
1355859 led@1 {
1356860 label = "pcieslot-c01";
1357861 reg = <1>;
@@ -1439,26 +943,6 @@ · 81 unmodified lines
1439943 default-state = "keep";
1440944 type = <PCA955X_TYPE_LED>;
1441945 };
1442−
1443− gpio@12 {
1444− reg = <12>;
1445− type = <PCA955X_TYPE_GPIO>;
1446− };
1447−
1448− gpio@13 {
1449− reg = <13>;
1450− type = <PCA955X_TYPE_GPIO>;
1451− };
1452−
1453− gpio@14 {
1454− reg = <14>;
1455− type = <PCA955X_TYPE_GPIO>;
1456− };
1457−
1458− gpio@15 {
1459− reg = <15>;
1460− type = <PCA955X_TYPE_GPIO>;
1461− };
1462946 };
1463947 };
1464948
@@ -2082,11 +1566,6 @@ · 617 unmodified lines
20821566 type = <PCA955X_TYPE_LED>;
20831567 };
20841568
2085− gpio@7 {
2086− reg = <7>;
2087− type = <PCA955X_TYPE_GPIO>;
2088− };
2089−
20901569 led@8 {
20911570 label = "vrm4";
20921571 reg = <8>;
@@ -2217,11 +1696,6 @@ · 124 unmodified lines
22171696 type = <PCA955X_TYPE_LED>;
22181697 };
22191698
2220− gpio@7 {
2221− reg = <7>;
2222− type = <PCA955X_TYPE_GPIO>;
2223− };
2224−
22251699 led@8 {
22261700 label = "vrm0";
22271701 reg = <8>;
@@ -2310,6 +1784,27 @@ · 82 unmodified lines
23101784 compatible = "atmel,24c128";
23111785 reg = <0x50>;
23121786 };
1787+
1788+ i2c-switch@70 {
1789+ compatible = "nxp,pca9546";
1790+ reg = <0x70>;
1791+ #address-cells = <1>;
1792+ #size-cells = <0>;
1793+ status = "okay";
1794+ i2c-mux-idle-disconnect;
1795+
1796+ i2c8mux0chn0: i2c@0 {
1797+ #address-cells = <1>;
1798+ #size-cells = <0>;
1799+ reg = <0>;
1800+ };
1801+
1802+ i2c8mux0chn1: i2c@1 {
1803+ #address-cells = <1>;
1804+ #size-cells = <0>;
1805+ reg = <1>;
1806+ };
1807+ };
23131808 };
23141809
23151810 &i2c9 {
@@ -2413,15 +1908,21 @@ · 97 unmodified lines
24131908 };
24141909
24151910 &i2c14 {
1911+ multi-master;
24161912 status = "okay";
24171913
1914+ ibm-panel@62 {
1915+ compatible = "ibm,op-panel";
1916+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1917+ };
1918+
24181919 i2c-switch@70 {
24191920 compatible = "nxp,pca9546";
24201921 reg = <0x70>;
24211922 #address-cells = <1>;
24221923 #size-cells = <0>;
24231924 status = "okay";
2424− i2c-mux-idle-disconnect;
1925+ idle-state = <1>;
24251926
24261927 i2c14mux0chn0: i2c@0 {
24271928 #address-cells = <1>;
@@ -2651,16 +2152,6 @@ · 223 unmodified lines
26512152 default-state = "keep";
26522153 type = <PCA955X_TYPE_LED>;
26532154 };
2654−
2655− gpio@14 {
2656− reg = <14>;
2657− type = <PCA955X_TYPE_GPIO>;
2658− };
2659−
2660− gpio@15 {
2661− reg = <15>;
2662− type = <PCA955X_TYPE_GPIO>;
2663− };
26642155 };
26652156
26662157 pca0: pca9552@61 {
@@ -2680,86 +2171,6 @@ · 13 unmodified lines
26802171 "presence-fan2",
26812172 "presence-fan1",
26822173 "presence-fan0";
2683−
2684− gpio@0 {
2685− reg = <0>;
2686− type = <PCA955X_TYPE_GPIO>;
2687− };
2688−
2689− gpio@1 {
2690− reg = <1>;
2691− type = <PCA955X_TYPE_GPIO>;
2692− };
2693−
2694− gpio@2 {
2695− reg = <2>;
2696− type = <PCA955X_TYPE_GPIO>;
2697− };
2698−
2699− gpio@3 {
2700− reg = <3>;
2701− type = <PCA955X_TYPE_GPIO>;
2702− };
2703−
2704− gpio@4 {
2705− reg = <4>;
2706− type = <PCA955X_TYPE_GPIO>;
2707− };
2708−
2709− gpio@5 {
2710− reg = <5>;
2711− type = <PCA955X_TYPE_GPIO>;
2712− };
2713−
2714− gpio@6 {
2715− reg = <6>;
2716− type = <PCA955X_TYPE_GPIO>;
2717− };
2718−
2719− gpio@7 {
2720− reg = <7>;
2721− type = <PCA955X_TYPE_GPIO>;
2722− };
2723−
2724− gpio@8 {
2725− reg = <8>;
2726− type = <PCA955X_TYPE_GPIO>;
2727− };
2728−
2729− gpio@9 {
2730− reg = <9>;
2731− type = <PCA955X_TYPE_GPIO>;
2732− };
2733−
2734− gpio@10 {
2735− reg = <10>;
2736− type = <PCA955X_TYPE_GPIO>;
2737− };
2738−
2739− gpio@11 {
2740− reg = <11>;
2741− type = <PCA955X_TYPE_GPIO>;
2742− };
2743−
2744− gpio@12 {
2745− reg = <12>;
2746− type = <PCA955X_TYPE_GPIO>;
2747− };
2748−
2749− gpio@13 {
2750− reg = <13>;
2751− type = <PCA955X_TYPE_GPIO>;
2752− };
2753−
2754− gpio@14 {
2755− reg = <14>;
2756− type = <PCA955X_TYPE_GPIO>;
2757− };
2758−
2759− gpio@15 {
2760− reg = <15>;
2761− type = <PCA955X_TYPE_GPIO>;
2762− };
27632174 };
27642175 };
27652176 };
@@ -2816,6 +2227,152 @@ · 50 unmodified lines
28162227
28172228 &i2c15 {
28182229 status = "okay";
2230+
2231+ i2c-switch@70 {
2232+ compatible = "nxp,pca9546";
2233+ reg = <0x70>;
2234+ #address-cells = <1>;
2235+ #size-cells = <0>;
2236+ i2c-mux-idle-disconnect;
2237+
2238+ i2c15mux0chn0: i2c@0 {
2239+ #address-cells = <1>;
2240+ #size-cells = <0>;
2241+ reg = <0>;
2242+
2243+ eeprom@53 {
2244+ compatible = "atmel,24c64";
2245+ reg = <0x53>;
2246+ };
2247+ };
2248+
2249+ i2c15mux0chn1: i2c@1 {
2250+ #address-cells = <1>;
2251+ #size-cells = <0>;
2252+ reg = <1>;
2253+
2254+ eeprom@53 {
2255+ compatible = "atmel,24c64";
2256+ reg = <0x53>;
2257+ };
2258+ };
2259+
2260+ i2c15mux0chn2: i2c@2 {
2261+ #address-cells = <1>;
2262+ #size-cells = <0>;
2263+ reg = <2>;
2264+
2265+ eeprom@53 {
2266+ compatible = "atmel,24c64";
2267+ reg = <0x53>;
2268+ };
2269+ };
2270+
2271+ i2c15mux0chn3: i2c@3 {
2272+ #address-cells = <1>;
2273+ #size-cells = <0>;
2274+ reg = <3>;
2275+
2276+ eeprom@53 {
2277+ compatible = "atmel,24c64";
2278+ reg = <0x53>;
2279+ };
2280+ };
2281+ };
2282+
2283+ i2c-switch@71 {
2284+ compatible = "nxp,pca9546";
2285+ reg = <0x71>;
2286+ #address-cells = <1>;
2287+ #size-cells = <0>;
2288+ i2c-mux-idle-disconnect;
2289+
2290+ i2c15mux1chn0: i2c@0 {
2291+ #address-cells = <1>;
2292+ #size-cells = <0>;
2293+ reg = <0>;
2294+
2295+ eeprom@53 {
2296+ compatible = "atmel,24c64";
2297+ reg = <0x53>;
2298+ };
2299+ };
2300+
2301+ i2c15mux1chn1: i2c@1 {
2302+ #address-cells = <1>;
2303+ #size-cells = <0>;
2304+ reg = <1>;
2305+
2306+ eeprom@53 {
2307+ compatible = "atmel,24c64";
2308+ reg = <0x53>;
2309+ };
2310+ };
2311+
2312+ i2c15mux1chn2: i2c@2 {
2313+ #address-cells = <1>;
2314+ #size-cells = <0>;
2315+ reg = <2>;
2316+
2317+ eeprom@53 {
2318+ compatible = "atmel,24c64";
2319+ reg = <0x53>;
2320+ };
2321+ };
2322+
2323+ i2c15mux1chn3: i2c@3 {
2324+ #address-cells = <1>;
2325+ #size-cells = <0>;
2326+ reg = <3>;
2327+
2328+ eeprom@53 {
2329+ compatible = "atmel,24c64";
2330+ reg = <0x53>;
2331+ };
2332+ };
2333+ };
2334+
2335+ i2c-switch@72 {
2336+ compatible = "nxp,pca9546";
2337+ reg = <0x72>;
2338+ #address-cells = <1>;
2339+ #size-cells = <0>;
2340+ i2c-mux-idle-disconnect;
2341+
2342+ i2c15mux2chn0: i2c@0 {
2343+ #address-cells = <1>;
2344+ #size-cells = <0>;
2345+ reg = <0>;
2346+
2347+ eeprom@53 {
2348+ compatible = "atmel,24c64";
2349+ reg = <0x53>;
2350+ };
2351+ };
2352+
2353+ i2c15mux2chn1: i2c@1 {
2354+ #address-cells = <1>;
2355+ #size-cells = <0>;
2356+ reg = <1>;
2357+
2358+ eeprom@53 {
2359+ compatible = "atmel,24c64";
2360+ reg = <0x53>;
2361+ };
2362+ };
2363+
2364+ i2c15mux2chn2: i2c@2 {
2365+ #address-cells = <1>;
2366+ #size-cells = <0>;
2367+ reg = <2>;
2368+ };
2369+
2370+ i2c15mux2chn3: i2c@3 {
2371+ #address-cells = <1>;
2372+ #size-cells = <0>;
2373+ reg = <3>;
2374+ };
2375+ };
28192376 };
28202377
28212378 &ehci1 {
@@ -4050,11 +3607,6 @@ · 1228 unmodified lines
40503607 memory-region = <&flash_memory>;
40513608 };
40523609
4053−&kcs4 {
4054− compatible = "openbmc,mctp-lpc";
4055− status = "okay";
4056−};
4057−
40583610 &mac2 {
40593611 status = "okay";
40603612 pinctrl-names = "default";
@@ -4093,3 +3645,14 @@ · 32 unmodified lines
40933645 status = "okay";
40943646 memory-region = <&vga_memory>;
40953647 };
3648+
3649+&kcs2 {
3650+ status = "okay";
3651+ aspeed,lpc-io-reg = <0xca8 0xcac>;
3652+};
3653+
3654+&kcs3 {
3655+ status = "okay";
3656+ aspeed,lpc-io-reg = <0xca2>;
3657+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
3658+};
arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts+956−331
@@ -82,7 +82,7 @@ · 81 unmodified lines
8282
8383 chosen {
8484 stdout-path = &uart5;
85− bootargs = "console=ttyS4,115200n8";
85+ bootargs = "console=ttyS4,115200n8 earlycon";
8686 };
8787
8888 memory@80000000 {
@@ -116,34 +116,6 @@ · 27 unmodified lines
116116 };
117117 };
118118
119− gpio-keys {
120− compatible = "gpio-keys";
121−
122− ps0-presence {
123− label = "ps0-presence";
124− gpios = <&gpio0 ASPEED_GPIO(S, 0) GPIO_ACTIVE_LOW>;
125− linux,code = <ASPEED_GPIO(S, 0)>;
126− };
127−
128− ps1-presence {
129− label = "ps1-presence";
130− gpios = <&gpio0 ASPEED_GPIO(S, 1) GPIO_ACTIVE_LOW>;
131− linux,code = <ASPEED_GPIO(S, 1)>;
132− };
133−
134− ps2-presence {
135− label = "ps2-presence";
136− gpios = <&gpio0 ASPEED_GPIO(S, 2) GPIO_ACTIVE_LOW>;
137− linux,code = <ASPEED_GPIO(S, 2)>;
138− };
139−
140− ps3-presence {
141− label = "ps3-presence";
142− gpios = <&gpio0 ASPEED_GPIO(S, 3) GPIO_ACTIVE_LOW>;
143− linux,code = <ASPEED_GPIO(S, 3)>;
144− };
145− };
146−
147119 i2c2mux: i2cmux {
148120 compatible = "i2c-mux-gpio";
149121 #address-cells = <1>;
@@ -246,6 +218,21 @@ · 96 unmodified lines
246218 linux,code = <11>;
247219 };
248220 };
221+
222+ iio-hwmon-battery {
223+ compatible = "iio-hwmon";
224+ io-channels = <&adc1 7>;
225+ };
226+};
227+
228+&adc1 {
229+ status = "okay";
230+ aspeed,int-vref-microvolt = <2500000>;
231+ pinctrl-names = "default";
232+ pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
233+ &pinctrl_adc10_default &pinctrl_adc11_default
234+ &pinctrl_adc12_default &pinctrl_adc13_default
235+ &pinctrl_adc14_default &pinctrl_adc15_default>;
249236 };
250237
251238 &ehci1 {
@@ -259,10 +246,10 @@ · 7 unmodified lines
259246 /*C0-C7*/ "","","","","","","","",
260247 /*D0-D7*/ "","","","","","","","",
261248 /*E0-E7*/ "","","","","","","","",
262− /*F0-F7*/ "","","","","","","","",
249+ /*F0-F7*/ "","","","","","","factory-reset-toggle","",
263250 /*G0-G7*/ "","","","","","","","",
264251 /*H0-H7*/ "","bmc-ingraham0","rear-enc-id0","rear-enc-fault0","","","","",
265− /*I0-I7*/ "","","","","","","","",
252+ /*I0-I7*/ "","","","","","","bmc-secure-boot","",
266253 /*J0-J7*/ "","","","","","","","",
267254 /*K0-K7*/ "","","","","","","","",
268255 /*L0-L7*/ "","","","","","","","",
@@ -270,7 +257,7 @@ · 1 unmodified line
270257 /*N0-N7*/ "","","","","","","","",
271258 /*O0-O7*/ "","","","usb-power","","","","",
272259 /*P0-P7*/ "","","","","pcieslot-power","","","",
273− /*Q0-Q7*/ "cfam-reset","","","","","","","",
260+ /*Q0-Q7*/ "cfam-reset","","regulator-standby-faulted","","","","","",
274261 /*R0-R7*/ "bmc-tpm-reset","power-chassis-control","power-chassis-good","","","","","",
275262 /*S0-S7*/ "presence-ps0","presence-ps1","presence-ps2","presence-ps3",
276263 "","","","",
@@ -282,13 +269,6 @@ · 5 unmodified lines
282269 /*Y0-Y7*/ "","","","","","","","",
283270 /*Z0-Z7*/ "","","","","","","","";
284271
285− pin_mclr_vpp {
286− gpio-hog;
287− gpios = <ASPEED_GPIO(P, 7) GPIO_OPEN_DRAIN>;
288− output-high;
289− line-name = "mclr_vpp";
290− };
291−
292272 i2c3_mux_oe_n {
293273 gpio-hog;
294274 gpios = <ASPEED_GPIO(G, 6) GPIO_ACTIVE_LOW>;
@@ -945,46 +925,6 @@ · 650 unmodified lines
945925 "DASD_BP2_PRESENT_N",
946926 "DASD_BP1_PRESENT_N",
947927 "DASD_BP0_PRESENT_N";
948−
949− gpio@0 {
950− reg = <0>;
951− type = <PCA955X_TYPE_GPIO>;
952− };
953−
954− gpio@1 {
955− reg = <1>;
956− type = <PCA955X_TYPE_GPIO>;
957− };
958−
959− gpio@2 {
960− reg = <2>;
961− type = <PCA955X_TYPE_GPIO>;
962− };
963−
964− gpio@3 {
965− reg = <3>;
966− type = <PCA955X_TYPE_GPIO>;
967− };
968−
969− gpio@4 {
970− reg = <4>;
971− type = <PCA955X_TYPE_GPIO>;
972− };
973−
974− gpio@5 {
975− reg = <5>;
976− type = <PCA955X_TYPE_GPIO>;
977− };
978−
979− gpio@6 {
980− reg = <6>;
981− type = <PCA955X_TYPE_GPIO>;
982− };
983−
984− gpio@7 {
985− reg = <7>;
986− type = <PCA955X_TYPE_GPIO>;
987− };
988928 };
989929 };
990930
@@ -1025,86 +965,6 @@ · 34 unmodified lines
1025965 "SLOT1_EXPANDER_PRSNT_N", "SLOT2_EXPANDER_PRSNT_N",
1026966 "SLOT3_EXPANDER_PRSNT_N", "SLOT4_EXPANDER_PRSNT_N",
1027967 "", "", "", "", "", "";
1028−
1029− gpio@0 {
1030− reg = <0>;
1031− type = <PCA955X_TYPE_GPIO>;
1032− };
1033−
1034− gpio@1 {
1035− reg = <1>;
1036− type = <PCA955X_TYPE_GPIO>;
1037− };
1038−
1039− gpio@2 {
1040− reg = <2>;
1041− type = <PCA955X_TYPE_GPIO>;
1042− };
1043−
1044− gpio@3 {
1045− reg = <3>;
1046− type = <PCA955X_TYPE_GPIO>;
1047− };
1048−
1049− gpio@4 {
1050− reg = <4>;
1051− type = <PCA955X_TYPE_GPIO>;
1052− };
1053−
1054− gpio@5 {
1055− reg = <5>;
1056− type = <PCA955X_TYPE_GPIO>;
1057− };
1058−
1059− gpio@6 {
1060− reg = <6>;
1061− type = <PCA955X_TYPE_GPIO>;
1062− };
1063−
1064− gpio@7 {
1065− reg = <7>;
1066− type = <PCA955X_TYPE_GPIO>;
1067− };
1068−
1069− gpio@8 {
1070− reg = <8>;
1071− type = <PCA955X_TYPE_GPIO>;
1072− };
1073−
1074− gpio@9 {
1075− reg = <9>;
1076− type = <PCA955X_TYPE_GPIO>;
1077− };
1078−
1079− gpio@10 {
1080− reg = <10>;
1081− type = <PCA955X_TYPE_GPIO>;
1082− };
1083−
1084− gpio@11 {
1085− reg = <11>;
1086− type = <PCA955X_TYPE_GPIO>;
1087− };
1088−
1089− gpio@12 {
1090− reg = <12>;
1091− type = <PCA955X_TYPE_GPIO>;
1092− };
1093−
1094− gpio@13 {
1095− reg = <13>;
1096− type = <PCA955X_TYPE_GPIO>;
1097− };
1098−
1099− gpio@14 {
1100− reg = <14>;
1101− type = <PCA955X_TYPE_GPIO>;
1102− };
1103−
1104− gpio@15 {
1105− reg = <15>;
1106− type = <PCA955X_TYPE_GPIO>;
1107− };
1108968 };
1109969 };
1110970
@@ -1126,6 +986,32 @@ · 15 unmodified lines
1126986 reg = <0x4a>;
1127987 };
1128988
989+ pca9551@60 {
990+ compatible = "nxp,pca9551";
991+ reg = <0x60>;
992+ #address-cells = <1>;
993+ #size-cells = <0>;
994+
995+ gpio-controller;
996+ #gpio-cells = <2>;
997+
998+ led@0 {
999+ label = "cablecard0-cxp-top";
1000+ reg = <0>;
1001+ retain-state-shutdown;
1002+ default-state = "keep";
1003+ type = <PCA955X_TYPE_LED>;
1004+ };
1005+
1006+ led@1 {
1007+ label = "cablecard0-cxp-bot";
1008+ reg = <1>;
1009+ retain-state-shutdown;
1010+ default-state = "keep";
1011+ type = <PCA955X_TYPE_LED>;
1012+ };
1013+ };
1014+
11291015 pca9546@70 {
11301016 compatible = "nxp,pca9546";
11311017 reg = <0x70>;
@@ -1182,6 +1068,58 @@ · 50 unmodified lines
11821068 reg = <0x49>;
11831069 };
11841070
1071+ pca9551@60 {
1072+ compatible = "nxp,pca9551";
1073+ reg = <0x60>;
1074+ #address-cells = <1>;
1075+ #size-cells = <0>;
1076+
1077+ gpio-controller;
1078+ #gpio-cells = <2>;
1079+
1080+ led@0 {
1081+ label = "cablecard3-cxp-top";
1082+ reg = <0>;
1083+ retain-state-shutdown;
1084+ default-state = "keep";
1085+ type = <PCA955X_TYPE_LED>;
1086+ };
1087+
1088+ led@1 {
1089+ label = "cablecard3-cxp-bot";
1090+ reg = <1>;
1091+ retain-state-shutdown;
1092+ default-state = "keep";
1093+ type = <PCA955X_TYPE_LED>;
1094+ };
1095+ };
1096+
1097+ pca9551@61 {
1098+ compatible = "nxp,pca9551";
1099+ reg = <0x61>;
1100+ #address-cells = <1>;
1101+ #size-cells = <0>;
1102+
1103+ gpio-controller;
1104+ #gpio-cells = <2>;
1105+
1106+ led@0 {
1107+ label = "cablecard4-cxp-top";
1108+ reg = <0>;
1109+ retain-state-shutdown;
1110+ default-state = "keep";
1111+ type = <PCA955X_TYPE_LED>;
1112+ };
1113+
1114+ led@1 {
1115+ label = "cablecard4-cxp-bot";
1116+ reg = <1>;
1117+ retain-state-shutdown;
1118+ default-state = "keep";
1119+ type = <PCA955X_TYPE_LED>;
1120+ };
1121+ };
1122+
11851123 pca9546@70 {
11861124 compatible = "nxp,pca9546";
11871125 reg = <0x70>;
@@ -1290,313 +1228,736 @@ · 102 unmodified lines
12901228 multi-master;
12911229 status = "okay";
12921230
1293− si7021-a20@40 {
1294− compatible = "silabs,si7020";
1295− reg = <0x40>;
1296− };
1297−
1298− tmp275@48 {
1299− compatible = "ti,tmp275";
1300− reg = <0x48>;
1301− };
1302−
1303− max: max31785@52 {
1304− compatible = "maxim,max31785a";
1305− reg = <0x52>;
1231+ pca9552@30 {
1232+ compatible = "ibm,pca9552";
1233+ reg = <0x30>;
13061234 #address-cells = <1>;
13071235 #size-cells = <0>;
13081236
1309− fan0: fan@0 {
1310− compatible = "pmbus-fan";
1237+ gpio-controller;
1238+ #gpio-cells = <2>;
1239+
1240+ led@0 {
1241+ label = "pcieslot0";
13111242 reg = <0>;
1312− tach-pulses = <2>;
1243+ retain-state-shutdown;
1244+ default-state = "keep";
1245+ type = <PCA955X_TYPE_LED>;
13131246 };
13141247
1315− fan1: fan@1 {
1316− compatible = "pmbus-fan";
1248+ led@1 {
1249+ label = "pcieslot1";
13171250 reg = <1>;
1318− tach-pulses = <2>;
1251+ retain-state-shutdown;
1252+ default-state = "keep";
1253+ type = <PCA955X_TYPE_LED>;
13191254 };
13201255
1321− fan2: fan@2 {
1322− compatible = "pmbus-fan";
1256+ led@2 {
1257+ label = "pcieslot2";
13231258 reg = <2>;
1324− tach-pulses = <2>;
1259+ retain-state-shutdown;
1260+ default-state = "keep";
1261+ type = <PCA955X_TYPE_LED>;
13251262 };
13261263
1327− fan3: fan@3 {
1328− compatible = "pmbus-fan";
1264+ led@3 {
1265+ label = "pcieslot3";
13291266 reg = <3>;
1330− tach-pulses = <2>;
1267+ retain-state-shutdown;
1268+ default-state = "keep";
1269+ type = <PCA955X_TYPE_LED>;
13311270 };
13321271
1333− fan4: fan@4 {
1334− compatible = "pmbus-fan";
1272+ led@4 {
1273+ label = "pcieslot4";
13351274 reg = <4>;
1336− tach-pulses = <2>;
1275+ retain-state-shutdown;
1276+ default-state = "keep";
1277+ type = <PCA955X_TYPE_LED>;
13371278 };
13381279
1339− fan5: fan@5 {
1340− compatible = "pmbus-fan";
1280+ led@5 {
1281+ label = "cpu1";
13411282 reg = <5>;
1342− tach-pulses = <2>;
1283+ retain-state-shutdown;
1284+ default-state = "keep";
1285+ type = <PCA955X_TYPE_LED>;
1286+ };
1287+
1288+ led@6 {
1289+ label = "cpu-vrm1";
1290+ reg = <6>;
1291+ retain-state-shutdown;
1292+ default-state = "keep";
1293+ type = <PCA955X_TYPE_LED>;
1294+ };
1295+
1296+ led@8 {
1297+ label = "lcd-russel";
1298+ reg = <8>;
1299+ retain-state-shutdown;
1300+ default-state = "keep";
1301+ type = <PCA955X_TYPE_LED>;
13431302 };
13441303 };
13451304
1346− pca0: pca9552@61 {
1347− compatible = "nxp,pca9552";
1348− reg = <0x61>;
1305+ pca9552@31 {
1306+ compatible = "ibm,pca9552";
1307+ reg = <0x31>;
13491308 #address-cells = <1>;
13501309 #size-cells = <0>;
13511310
13521311 gpio-controller;
13531312 #gpio-cells = <2>;
13541313
1355− gpio@0 {
1314+ led@0 {
1315+ label = "ddimm0";
13561316 reg = <0>;
1357− type = <PCA955X_TYPE_GPIO>;
1317+ retain-state-shutdown;
1318+ default-state = "keep";
1319+ type = <PCA955X_TYPE_LED>;
13581320 };
13591321
1360− gpio@1 {
1322+ led@1 {
1323+ label = "ddimm1";
13611324 reg = <1>;
1362− type = <PCA955X_TYPE_GPIO>;
1325+ retain-state-shutdown;
1326+ default-state = "keep";
1327+ type = <PCA955X_TYPE_LED>;
13631328 };
13641329
1365− gpio@2 {
1330+ led@2 {
1331+ label = "ddimm2";
13661332 reg = <2>;
1367− type = <PCA955X_TYPE_GPIO>;
1333+ retain-state-shutdown;
1334+ default-state = "keep";
1335+ type = <PCA955X_TYPE_LED>;
13681336 };
13691337
1370− gpio@3 {
1338+ led@3 {
1339+ label = "ddimm3";
13711340 reg = <3>;
1372− type = <PCA955X_TYPE_GPIO>;
1341+ retain-state-shutdown;
1342+ default-state = "keep";
1343+ type = <PCA955X_TYPE_LED>;
13731344 };
13741345
1375− gpio@4 {
1346+ led@4 {
1347+ label = "ddimm4";
13761348 reg = <4>;
1377− type = <PCA955X_TYPE_GPIO>;
1349+ retain-state-shutdown;
1350+ default-state = "keep";
1351+ type = <PCA955X_TYPE_LED>;
13781352 };
13791353
1380− gpio@5 {
1354+ led@5 {
1355+ label = "ddimm5";
13811356 reg = <5>;
1382− type = <PCA955X_TYPE_GPIO>;
1357+ retain-state-shutdown;
1358+ default-state = "keep";
1359+ type = <PCA955X_TYPE_LED>;
13831360 };
13841361
1385− gpio@6 {
1362+ led@6 {
1363+ label = "ddimm6";
13861364 reg = <6>;
1387− type = <PCA955X_TYPE_GPIO>;
1365+ retain-state-shutdown;
1366+ default-state = "keep";
1367+ type = <PCA955X_TYPE_LED>;
13881368 };
13891369
1390− gpio@7 {
1370+ led@7 {
1371+ label = "ddimm7";
13911372 reg = <7>;
1392− type = <PCA955X_TYPE_GPIO>;
1373+ retain-state-shutdown;
1374+ default-state = "keep";
1375+ type = <PCA955X_TYPE_LED>;
13931376 };
13941377
1395− gpio@8 {
1378+ led@8 {
1379+ label = "ddimm8";
13961380 reg = <8>;
1397− type = <PCA955X_TYPE_GPIO>;
1381+ retain-state-shutdown;
1382+ default-state = "keep";
1383+ type = <PCA955X_TYPE_LED>;
13981384 };
13991385
1400− gpio@9 {
1386+ led@9 {
1387+ label = "ddimm9";
14011388 reg = <9>;
1402− type = <PCA955X_TYPE_GPIO>;
1389+ retain-state-shutdown;
1390+ default-state = "keep";
1391+ type = <PCA955X_TYPE_LED>;
14031392 };
14041393
1405− gpio@10 {
1394+ led@10 {
1395+ label = "ddimm10";
14061396 reg = <10>;
1407− type = <PCA955X_TYPE_GPIO>;
1397+ retain-state-shutdown;
1398+ default-state = "keep";
1399+ type = <PCA955X_TYPE_LED>;
14081400 };
14091401
1410− gpio@11 {
1402+ led@11 {
1403+ label = "ddimm11";
14111404 reg = <11>;
1412− type = <PCA955X_TYPE_GPIO>;
1405+ retain-state-shutdown;
1406+ default-state = "keep";
1407+ type = <PCA955X_TYPE_LED>;
14131408 };
14141409
1415− gpio@12 {
1410+ led@12 {
1411+ label = "ddimm12";
14161412 reg = <12>;
1417− type = <PCA955X_TYPE_GPIO>;
1413+ retain-state-shutdown;
1414+ default-state = "keep";
1415+ type = <PCA955X_TYPE_LED>;
14181416 };
14191417
1420− gpio@13 {
1418+ led@13 {
1419+ label = "ddimm13";
14211420 reg = <13>;
1422− type = <PCA955X_TYPE_GPIO>;
1421+ retain-state-shutdown;
1422+ default-state = "keep";
1423+ type = <PCA955X_TYPE_LED>;
14231424 };
14241425
1425− gpio@14 {
1426+ led@14 {
1427+ label = "ddimm14";
14261428 reg = <14>;
1427− type = <PCA955X_TYPE_GPIO>;
1429+ retain-state-shutdown;
1430+ default-state = "keep";
1431+ type = <PCA955X_TYPE_LED>;
14281432 };
14291433
1430− gpio@15 {
1434+ led@15 {
1435+ label = "ddimm15";
14311436 reg = <15>;
1432− type = <PCA955X_TYPE_GPIO>;
1437+ retain-state-shutdown;
1438+ default-state = "keep";
1439+ type = <PCA955X_TYPE_LED>;
14331440 };
14341441 };
14351442
1436− ibm-panel@62 {
1437− compatible = "ibm,op-panel";
1438− reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1439− };
1440−
1441− dps: dps310@76 {
1442− compatible = "infineon,dps310";
1443− reg = <0x76>;
1444− #io-channel-cells = <0>;
1445− };
1446−
1447− eeprom@50 {
1448− compatible = "atmel,24c64";
1449− reg = <0x50>;
1450− };
1451−
1452− eeprom@51 {
1453− compatible = "atmel,24c64";
1454− reg = <0x51>;
1455− };
1456−};
1457−
1458−&i2c8 {
1459− status = "okay";
1460−
1461− ucd90320@11 {
1462− compatible = "ti,ucd90320";
1463− reg = <0x11>;
1464− };
1465−
1466− rtc@32 {
1467− compatible = "epson,rx8900";
1443+ pca9552@32 {
1444+ compatible = "ibm,pca9552";
14681445 reg = <0x32>;
1469− };
1470−
1471− tmp275@48 {
1472− compatible = "ti,tmp275";
1473− reg = <0x48>;
1474− };
1475−
1476− tmp275@4a {
1477− compatible = "ti,tmp275";
1478− reg = <0x4a>;
1479− };
1480−
1481− eeprom@50 {
1482− compatible = "atmel,24c64";
1483− reg = <0x50>;
1484− };
1485−
1486− eeprom@51 {
1487− compatible = "atmel,24c64";
1488− reg = <0x51>;
1489− };
1490−
1491− pca_pres2: pca9552@61 {
1492− compatible = "nxp,pca9552";
1493− reg = <0x61>;
14941446 #address-cells = <1>;
14951447 #size-cells = <0>;
1448+
14961449 gpio-controller;
14971450 #gpio-cells = <2>;
14981451
1499− gpio-line-names =
1500− "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
1501− "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
1502− "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
1503− "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
1504− "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
1505− "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
1506− "", "", "", "";
1507−
1508− gpio@0 {
1452+ led@0 {
1453+ label = "ddimm16";
15091454 reg = <0>;
1510− type = <PCA955X_TYPE_GPIO>;
1455+ retain-state-shutdown;
1456+ default-state = "keep";
1457+ type = <PCA955X_TYPE_LED>;
15111458 };
15121459
1513− gpio@1 {
1460+ led@1 {
1461+ label = "ddimm17";
15141462 reg = <1>;
1515− type = <PCA955X_TYPE_GPIO>;
1463+ retain-state-shutdown;
1464+ default-state = "keep";
1465+ type = <PCA955X_TYPE_LED>;
15161466 };
15171467
1518− gpio@2 {
1468+ led@2 {
1469+ label = "ddimm18";
15191470 reg = <2>;
1520− type = <PCA955X_TYPE_GPIO>;
1471+ retain-state-shutdown;
1472+ default-state = "keep";
1473+ type = <PCA955X_TYPE_LED>;
15211474 };
15221475
1523− gpio@3 {
1476+ led@3 {
1477+ label = "ddimm19";
15241478 reg = <3>;
1525− type = <PCA955X_TYPE_GPIO>;
1479+ retain-state-shutdown;
1480+ default-state = "keep";
1481+ type = <PCA955X_TYPE_LED>;
15261482 };
15271483
1528− gpio@4 {
1484+ led@4 {
1485+ label = "ddimm20";
15291486 reg = <4>;
1530− type = <PCA955X_TYPE_GPIO>;
1487+ retain-state-shutdown;
1488+ default-state = "keep";
1489+ type = <PCA955X_TYPE_LED>;
15311490 };
15321491
1533− gpio@5 {
1492+ led@5 {
1493+ label = "ddimm21";
15341494 reg = <5>;
1535− type = <PCA955X_TYPE_GPIO>;
1495+ retain-state-shutdown;
1496+ default-state = "keep";
1497+ type = <PCA955X_TYPE_LED>;
15361498 };
15371499
1538− gpio@6 {
1500+ led@6 {
1501+ label = "ddimm22";
15391502 reg = <6>;
1540− type = <PCA955X_TYPE_GPIO>;
1503+ retain-state-shutdown;
1504+ default-state = "keep";
1505+ type = <PCA955X_TYPE_LED>;
15411506 };
15421507
1543− gpio@7 {
1508+ led@7 {
1509+ label = "ddimm23";
15441510 reg = <7>;
1545− type = <PCA955X_TYPE_GPIO>;
1511+ retain-state-shutdown;
1512+ default-state = "keep";
1513+ type = <PCA955X_TYPE_LED>;
15461514 };
15471515
1548− gpio@8 {
1516+ led@8 {
1517+ label = "ddimm24";
15491518 reg = <8>;
1550− type = <PCA955X_TYPE_GPIO>;
1519+ retain-state-shutdown;
1520+ default-state = "keep";
1521+ type = <PCA955X_TYPE_LED>;
15511522 };
15521523
1553− gpio@9 {
1524+ led@9 {
1525+ label = "ddimm25";
15541526 reg = <9>;
1555− type = <PCA955X_TYPE_GPIO>;
1527+ retain-state-shutdown;
1528+ default-state = "keep";
1529+ type = <PCA955X_TYPE_LED>;
15561530 };
15571531
1558− gpio@10 {
1532+ led@10 {
1533+ label = "ddimm26";
15591534 reg = <10>;
1560− type = <PCA955X_TYPE_GPIO>;
1535+ retain-state-shutdown;
1536+ default-state = "keep";
1537+ type = <PCA955X_TYPE_LED>;
15611538 };
15621539
1563− gpio@11 {
1540+ led@11 {
1541+ label = "ddimm27";
15641542 reg = <11>;
1565− type = <PCA955X_TYPE_GPIO>;
1543+ retain-state-shutdown;
1544+ default-state = "keep";
1545+ type = <PCA955X_TYPE_LED>;
15661546 };
15671547
1568− gpio@12 {
1548+ led@12 {
1549+ label = "ddimm28";
15691550 reg = <12>;
1570− type = <PCA955X_TYPE_GPIO>;
1551+ retain-state-shutdown;
1552+ default-state = "keep";
1553+ type = <PCA955X_TYPE_LED>;
15711554 };
15721555
1573− gpio@13 {
1556+ led@13 {
1557+ label = "ddimm29";
15741558 reg = <13>;
1575− type = <PCA955X_TYPE_GPIO>;
1559+ retain-state-shutdown;
1560+ default-state = "keep";
1561+ type = <PCA955X_TYPE_LED>;
15761562 };
15771563
1578− gpio@14 {
1564+ led@14 {
1565+ label = "ddimm30";
15791566 reg = <14>;
1580− type = <PCA955X_TYPE_GPIO>;
1567+ retain-state-shutdown;
1568+ default-state = "keep";
1569+ type = <PCA955X_TYPE_LED>;
15811570 };
15821571
1583− gpio@15 {
1572+ led@15 {
1573+ label = "ddimm31";
15841574 reg = <15>;
1585− type = <PCA955X_TYPE_GPIO>;
1575+ retain-state-shutdown;
1576+ default-state = "keep";
1577+ type = <PCA955X_TYPE_LED>;
15861578 };
15871579 };
15881580
1589−};
1581+ pca9552@33 {
1582+ compatible = "ibm,pca9552";
1583+ reg = <0x33>;
1584+ #address-cells = <1>;
1585+ #size-cells = <0>;
15901586
1591−&i2c9 {
1592− status = "okay";
1587+ gpio-controller;
1588+ #gpio-cells = <2>;
15931589
1594− tmp423a@4c {
1595− compatible = "ti,tmp423";
1596− reg = <0x4c>;
1597− };
1590+ led@0 {
1591+ label = "planar";
1592+ reg = <0>;
1593+ retain-state-shutdown;
1594+ default-state = "keep";
1595+ type = <PCA955X_TYPE_LED>;
1596+ };
15981597
1599− tmp423b@4d {
1598+ led@1 {
1599+ label = "cpu0";
1600+ reg = <1>;
1601+ retain-state-shutdown;
1602+ default-state = "keep";
1603+ type = <PCA955X_TYPE_LED>;
1604+ };
1605+
1606+ led@3 {
1607+ label = "dasd-pyramid0";
1608+ reg = <3>;
1609+ retain-state-shutdown;
1610+ default-state = "keep";
1611+ type = <PCA955X_TYPE_LED>;
1612+ };
1613+
1614+ led@4 {
1615+ label = "dasd-pyramid1";
1616+ reg = <4>;
1617+ retain-state-shutdown;
1618+ default-state = "keep";
1619+ type = <PCA955X_TYPE_LED>;
1620+ };
1621+
1622+ led@5 {
1623+ label = "dasd-pyramid2";
1624+ reg = <5>;
1625+ retain-state-shutdown;
1626+ default-state = "keep";
1627+ type = <PCA955X_TYPE_LED>;
1628+ };
1629+
1630+ led@6 {
1631+ label = "cpu0-vrm0";
1632+ reg = <6>;
1633+ retain-state-shutdown;
1634+ default-state = "keep";
1635+ type = <PCA955X_TYPE_LED>;
1636+ };
1637+
1638+ led@7 {
1639+ label = "rtc-battery";
1640+ reg = <7>;
1641+ retain-state-shutdown;
1642+ default-state = "keep";
1643+ type = <PCA955X_TYPE_LED>;
1644+ };
1645+
1646+ led@8 {
1647+ label = "base-blyth";
1648+ reg = <8>;
1649+ retain-state-shutdown;
1650+ default-state = "keep";
1651+ type = <PCA955X_TYPE_LED>;
1652+ };
1653+
1654+ led@9 {
1655+ label = "pcieslot6";
1656+ reg = <9>;
1657+ retain-state-shutdown;
1658+ default-state = "keep";
1659+ type = <PCA955X_TYPE_LED>;
1660+ };
1661+
1662+ led@10 {
1663+ label = "pcieslot7";
1664+ reg = <10>;
1665+ retain-state-shutdown;
1666+ default-state = "keep";
1667+ type = <PCA955X_TYPE_LED>;
1668+ };
1669+
1670+ led@11 {
1671+ label = "pcieslot8";
1672+ reg = <11>;
1673+ retain-state-shutdown;
1674+ default-state = "keep";
1675+ type = <PCA955X_TYPE_LED>;
1676+ };
1677+
1678+ led@12 {
1679+ label = "pcieslot9";
1680+ reg = <12>;
1681+ retain-state-shutdown;
1682+ default-state = "keep";
1683+ type = <PCA955X_TYPE_LED>;
1684+ };
1685+
1686+ led@13 {
1687+ label = "pcieslot10";
1688+ reg = <13>;
1689+ retain-state-shutdown;
1690+ default-state = "keep";
1691+ type = <PCA955X_TYPE_LED>;
1692+ };
1693+
1694+ led@14 {
1695+ label = "pcieslot11";
1696+ reg = <14>;
1697+ retain-state-shutdown;
1698+ default-state = "keep";
1699+ type = <PCA955X_TYPE_LED>;
1700+ };
1701+
1702+ led@15 {
1703+ label = "tpm-wilson";
1704+ reg = <15>;
1705+ retain-state-shutdown;
1706+ default-state = "keep";
1707+ type = <PCA955X_TYPE_LED>;
1708+ };
1709+ };
1710+
1711+ si7021-a20@40 {
1712+ compatible = "silabs,si7020";
1713+ reg = <0x40>;
1714+ };
1715+
1716+ tmp275@48 {
1717+ compatible = "ti,tmp275";
1718+ reg = <0x48>;
1719+ };
1720+
1721+ max: max31785@52 {
1722+ compatible = "maxim,max31785a";
1723+ reg = <0x52>;
1724+ #address-cells = <1>;
1725+ #size-cells = <0>;
1726+
1727+ fan0: fan@0 {
1728+ compatible = "pmbus-fan";
1729+ reg = <0>;
1730+ tach-pulses = <2>;
1731+ };
1732+
1733+ fan1: fan@1 {
1734+ compatible = "pmbus-fan";
1735+ reg = <1>;
1736+ tach-pulses = <2>;
1737+ };
1738+
1739+ fan2: fan@2 {
1740+ compatible = "pmbus-fan";
1741+ reg = <2>;
1742+ tach-pulses = <2>;
1743+ };
1744+
1745+ fan3: fan@3 {
1746+ compatible = "pmbus-fan";
1747+ reg = <3>;
1748+ tach-pulses = <2>;
1749+ };
1750+
1751+ fan4: fan@4 {
1752+ compatible = "pmbus-fan";
1753+ reg = <4>;
1754+ tach-pulses = <2>;
1755+ };
1756+
1757+ fan5: fan@5 {
1758+ compatible = "pmbus-fan";
1759+ reg = <5>;
1760+ tach-pulses = <2>;
1761+ };
1762+ };
1763+
1764+ pca9551@60 {
1765+ compatible = "nxp,pca9551";
1766+ reg = <0x60>;
1767+ #address-cells = <1>;
1768+ #size-cells = <0>;
1769+
1770+ gpio-controller;
1771+ #gpio-cells = <2>;
1772+
1773+ led@0 {
1774+ label = "front-sys-id0";
1775+ reg = <0>;
1776+ retain-state-shutdown;
1777+ default-state = "keep";
1778+ type = <PCA955X_TYPE_LED>;
1779+ };
1780+
1781+ led@1 {
1782+ label = "front-check-log0";
1783+ reg = <1>;
1784+ retain-state-shutdown;
1785+ default-state = "keep";
1786+ type = <PCA955X_TYPE_LED>;
1787+ };
1788+
1789+ led@2 {
1790+ label = "front-enc-fault1";
1791+ reg = <2>;
1792+ retain-state-shutdown;
1793+ default-state = "keep";
1794+ type = <PCA955X_TYPE_LED>;
1795+ };
1796+
1797+ led@3 {
1798+ label = "front-sys-pwron0";
1799+ reg = <3>;
1800+ retain-state-shutdown;
1801+ default-state = "keep";
1802+ type = <PCA955X_TYPE_LED>;
1803+ };
1804+ };
1805+
1806+ pca0: pca9552@61 {
1807+ compatible = "nxp,pca9552";
1808+ reg = <0x61>;
1809+ #address-cells = <1>;
1810+ #size-cells = <0>;
1811+
1812+ gpio-controller;
1813+ #gpio-cells = <2>;
1814+
1815+ led@0 {
1816+ label = "fan0";
1817+ reg = <0>;
1818+ retain-state-shutdown;
1819+ default-state = "keep";
1820+ type = <PCA955X_TYPE_LED>;
1821+ };
1822+
1823+ led@1 {
1824+ label = "fan1";
1825+ reg = <1>;
1826+ retain-state-shutdown;
1827+ default-state = "keep";
1828+ type = <PCA955X_TYPE_LED>;
1829+ };
1830+
1831+ led@2 {
1832+ label = "fan2";
1833+ reg = <2>;
1834+ retain-state-shutdown;
1835+ default-state = "keep";
1836+ type = <PCA955X_TYPE_LED>;
1837+ };
1838+
1839+ led@3 {
1840+ label = "fan3";
1841+ reg = <3>;
1842+ retain-state-shutdown;
1843+ default-state = "keep";
1844+ type = <PCA955X_TYPE_LED>;
1845+ };
1846+
1847+ led@4 {
1848+ label = "fan4";
1849+ reg = <4>;
1850+ retain-state-shutdown;
1851+ default-state = "keep";
1852+ type = <PCA955X_TYPE_LED>;
1853+ };
1854+
1855+ led@5 {
1856+ label = "fan5";
1857+ reg = <5>;
1858+ retain-state-shutdown;
1859+ default-state = "keep";
1860+ type = <PCA955X_TYPE_LED>;
1861+ };
1862+ };
1863+
1864+ ibm-panel@62 {
1865+ compatible = "ibm,op-panel";
1866+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
1867+ };
1868+
1869+ dps: dps310@76 {
1870+ compatible = "infineon,dps310";
1871+ reg = <0x76>;
1872+ #io-channel-cells = <0>;
1873+ };
1874+
1875+ eeprom@50 {
1876+ compatible = "atmel,24c64";
1877+ reg = <0x50>;
1878+ };
1879+
1880+ eeprom@51 {
1881+ compatible = "atmel,24c64";
1882+ reg = <0x51>;
1883+ };
1884+};
1885+
1886+&i2c8 {
1887+ status = "okay";
1888+
1889+ ucd90320@11 {
1890+ compatible = "ti,ucd90320";
1891+ reg = <0x11>;
1892+ };
1893+
1894+ rtc@32 {
1895+ compatible = "epson,rx8900";
1896+ reg = <0x32>;
1897+ };
1898+
1899+ tmp275@48 {
1900+ compatible = "ti,tmp275";
1901+ reg = <0x48>;
1902+ };
1903+
1904+ tmp275@4a {
1905+ compatible = "ti,tmp275";
1906+ reg = <0x4a>;
1907+ };
1908+
1909+ eeprom@50 {
1910+ compatible = "atmel,24c64";
1911+ reg = <0x50>;
1912+ };
1913+
1914+ eeprom@51 {
1915+ compatible = "atmel,24c64";
1916+ reg = <0x51>;
1917+ };
1918+
1919+ pca_pres3: pca9552@60 {
1920+ compatible = "nxp,pca9552";
1921+ reg = <0x60>;
1922+ #address-cells = <1>;
1923+ #size-cells = <0>;
1924+ gpio-controller;
1925+ #gpio-cells = <2>;
1926+
1927+ gpio-line-names =
1928+ "", "", "", "", "", "", "", "",
1929+ "", "", "", "", "", "", "power-config-full-load", "";
1930+ };
1931+
1932+ pca_pres2: pca9552@61 {
1933+ compatible = "nxp,pca9552";
1934+ reg = <0x61>;
1935+ #address-cells = <1>;
1936+ #size-cells = <0>;
1937+ gpio-controller;
1938+ #gpio-cells = <2>;
1939+
1940+ gpio-line-names =
1941+ "SLOT6_PRSNT_EN_RSVD", "SLOT7_PRSNT_EN_RSVD",
1942+ "SLOT8_PRSNT_EN_RSVD", "SLOT9_PRSNT_EN_RSVD",
1943+ "SLOT10_PRSNT_EN_RSVD", "SLOT11_PRSNT_EN_RSVD",
1944+ "SLOT6_EXPANDER_PRSNT_N", "SLOT7_EXPANDER_PRSNT_N",
1945+ "SLOT8_EXPANDER_PRSNT_N", "SLOT9_EXPANDER_PRSNT_N",
1946+ "SLOT10_EXPANDER_PRSNT_N", "SLOT11_EXPANDER_PRSNT_N",
1947+ "", "", "", "";
1948+ };
1949+
1950+};
1951+
1952+&i2c9 {
1953+ status = "okay";
1954+
1955+ tmp423a@4c {
1956+ compatible = "ti,tmp423";
1957+ reg = <0x4c>;
1958+ };
1959+
1960+ tmp423b@4d {
16001961 compatible = "ti,tmp423";
16011962 reg = <0x4d>;
16021963 };
@@ -1639,6 +2000,32 @@ · 36 unmodified lines
16392000 reg = <0x49>;
16402001 };
16412002
2003+ pca9551@60 {
2004+ compatible = "nxp,pca9551";
2005+ reg = <0x60>;
2006+ #address-cells = <1>;
2007+ #size-cells = <0>;
2008+
2009+ gpio-controller;
2010+ #gpio-cells = <2>;
2011+
2012+ led@0 {
2013+ label = "cablecard10-cxp-top";
2014+ reg = <0>;
2015+ retain-state-shutdown;
2016+ default-state = "keep";
2017+ type = <PCA955X_TYPE_LED>;
2018+ };
2019+
2020+ led@1 {
2021+ label = "cablecard10-cxp-bot";
2022+ reg = <1>;
2023+ retain-state-shutdown;
2024+ default-state = "keep";
2025+ type = <PCA955X_TYPE_LED>;
2026+ };
2027+ };
2028+
16422029 pca9546@70 {
16432030 compatible = "nxp,pca9546";
16442031 reg = <0x70>;
@@ -1673,6 +2060,11 @@ · 28 unmodified lines
16732060
16742061 &i2c12 {
16752062 status = "okay";
2063+
2064+ eeprom@50 {
2065+ compatible = "atmel,24c64";
2066+ reg = <0x50>;
2067+ };
16762068 };
16772069
16782070 &i2c13 {
@@ -1682,6 +2074,80 @@ · 3 unmodified lines
16822074 compatible = "atmel,24c64";
16832075 reg = <0x50>;
16842076 };
2077+
2078+ pca9552@60 {
2079+ compatible = "nxp,pca9552";
2080+ reg = <0x60>;
2081+ #address-cells = <1>;
2082+ #size-cells = <0>;
2083+
2084+ gpio-controller;
2085+ #gpio-cells = <2>;
2086+
2087+ led@0 {
2088+ label = "nvme0";
2089+ reg = <0>;
2090+ retain-state-shutdown;
2091+ default-state = "keep";
2092+ type = <PCA955X_TYPE_LED>;
2093+ };
2094+
2095+ led@1 {
2096+ label = "nvme1";
2097+ reg = <1>;
2098+ retain-state-shutdown;
2099+ default-state = "keep";
2100+ type = <PCA955X_TYPE_LED>;
2101+ };
2102+
2103+ led@2 {
2104+ label = "nvme2";
2105+ reg = <2>;
2106+ retain-state-shutdown;
2107+ default-state = "keep";
2108+ type = <PCA955X_TYPE_LED>;
2109+ };
2110+
2111+ led@3 {
2112+ label = "nvme3";
2113+ reg = <3>;
2114+ retain-state-shutdown;
2115+ default-state = "keep";
2116+ type = <PCA955X_TYPE_LED>;
2117+ };
2118+
2119+ led@4 {
2120+ label = "nvme4";
2121+ reg = <4>;
2122+ retain-state-shutdown;
2123+ default-state = "keep";
2124+ type = <PCA955X_TYPE_LED>;
2125+ };
2126+
2127+ led@5 {
2128+ label = "nvme5";
2129+ reg = <5>;
2130+ retain-state-shutdown;
2131+ default-state = "keep";
2132+ type = <PCA955X_TYPE_LED>;
2133+ };
2134+
2135+ led@6 {
2136+ label = "nvme6";
2137+ reg = <6>;
2138+ retain-state-shutdown;
2139+ default-state = "keep";
2140+ type = <PCA955X_TYPE_LED>;
2141+ };
2142+
2143+ led@7 {
2144+ label = "nvme7";
2145+ reg = <7>;
2146+ retain-state-shutdown;
2147+ default-state = "keep";
2148+ type = <PCA955X_TYPE_LED>;
2149+ };
2150+ };
16852151 };
16862152
16872153 &i2c14 {
@@ -1691,6 +2157,80 @@ · 3 unmodified lines
16912157 compatible = "atmel,24c64";
16922158 reg = <0x50>;
16932159 };
2160+
2161+ pca9552@60 {
2162+ compatible = "nxp,pca9552";
2163+ reg = <0x60>;
2164+ #address-cells = <1>;
2165+ #size-cells = <0>;
2166+
2167+ gpio-controller;
2168+ #gpio-cells = <2>;
2169+
2170+ led@0 {
2171+ label = "nvme8";
2172+ reg = <0>;
2173+ retain-state-shutdown;
2174+ default-state = "keep";
2175+ type = <PCA955X_TYPE_LED>;
2176+ };
2177+
2178+ led@1 {
2179+ label = "nvme9";
2180+ reg = <1>;
2181+ retain-state-shutdown;
2182+ default-state = "keep";
2183+ type = <PCA955X_TYPE_LED>;
2184+ };
2185+
2186+ led@2 {
2187+ label = "nvme10";
2188+ reg = <2>;
2189+ retain-state-shutdown;
2190+ default-state = "keep";
2191+ type = <PCA955X_TYPE_LED>;
2192+ };
2193+
2194+ led@3 {
2195+ label = "nvme11";
2196+ reg = <3>;
2197+ retain-state-shutdown;
2198+ default-state = "keep";
2199+ type = <PCA955X_TYPE_LED>;
2200+ };
2201+
2202+ led@4 {
2203+ label = "nvme12";
2204+ reg = <4>;
2205+ retain-state-shutdown;
2206+ default-state = "keep";
2207+ type = <PCA955X_TYPE_LED>;
2208+ };
2209+
2210+ led@5 {
2211+ label = "nvme13";
2212+ reg = <5>;
2213+ retain-state-shutdown;
2214+ default-state = "keep";
2215+ type = <PCA955X_TYPE_LED>;
2216+ };
2217+
2218+ led@6 {
2219+ label = "nvme14";
2220+ reg = <6>;
2221+ retain-state-shutdown;
2222+ default-state = "keep";
2223+ type = <PCA955X_TYPE_LED>;
2224+ };
2225+
2226+ led@7 {
2227+ label = "nvme15";
2228+ reg = <7>;
2229+ retain-state-shutdown;
2230+ default-state = "keep";
2231+ type = <PCA955X_TYPE_LED>;
2232+ };
2233+ };
16942234 };
16952235
16962236 &i2c15 {
@@ -1700,6 +2240,80 @@ · 3 unmodified lines
17002240 compatible = "atmel,24c64";
17012241 reg = <0x50>;
17022242 };
2243+
2244+ pca9552@60 {
2245+ compatible = "nxp,pca9552";
2246+ reg = <0x60>;
2247+ #address-cells = <1>;
2248+ #size-cells = <0>;
2249+
2250+ gpio-controller;
2251+ #gpio-cells = <2>;
2252+
2253+ led@0 {
2254+ label = "nvme16";
2255+ reg = <0>;
2256+ retain-state-shutdown;
2257+ default-state = "keep";
2258+ type = <PCA955X_TYPE_LED>;
2259+ };
2260+
2261+ led@1 {
2262+ label = "nvme17";
2263+ reg = <1>;
2264+ retain-state-shutdown;
2265+ default-state = "keep";
2266+ type = <PCA955X_TYPE_LED>;
2267+ };
2268+
2269+ led@2 {
2270+ label = "nvme18";
2271+ reg = <2>;
2272+ retain-state-shutdown;
2273+ default-state = "keep";
2274+ type = <PCA955X_TYPE_LED>;
2275+ };
2276+
2277+ led@3 {
2278+ label = "nvme19";
2279+ reg = <3>;
2280+ retain-state-shutdown;
2281+ default-state = "keep";
2282+ type = <PCA955X_TYPE_LED>;
2283+ };
2284+
2285+ led@4 {
2286+ label = "nvme20";
2287+ reg = <4>;
2288+ retain-state-shutdown;
2289+ default-state = "keep";
2290+ type = <PCA955X_TYPE_LED>;
2291+ };
2292+
2293+ led@5 {
2294+ label = "nvme21";
2295+ reg = <5>;
2296+ retain-state-shutdown;
2297+ default-state = "keep";
2298+ type = <PCA955X_TYPE_LED>;
2299+ };
2300+
2301+ led@6 {
2302+ label = "nvme22";
2303+ reg = <6>;
2304+ retain-state-shutdown;
2305+ default-state = "keep";
2306+ type = <PCA955X_TYPE_LED>;
2307+ };
2308+
2309+ led@7 {
2310+ label = "nvme23";
2311+ reg = <7>;
2312+ retain-state-shutdown;
2313+ default-state = "keep";
2314+ type = <PCA955X_TYPE_LED>;
2315+ };
2316+ };
17032317 };
17042318
17052319 &vuart1 {
@@ -1777,3 +2391,14 @@ · 71 unmodified lines
17772391 status = "okay";
17782392 memory-region = <&vga_memory>;
17792393 };
2394+
2395+&kcs2 {
2396+ status = "okay";
2397+ aspeed,lpc-io-reg = <0xca8 0xcac>;
2398+};
2399+
2400+&kcs3 {
2401+ status = "okay";
2402+ aspeed,lpc-io-reg = <0xca2>;
2403+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
2404+};
arch/arm/boot/dts/aspeed-bmc-inspur-fp5280g2.dts+8−1
@@ -3,6 +3,7 @@ · 2 unmodified lines
33 #include "aspeed-g5.dtsi"
44 #include <dt-bindings/gpio/aspeed-gpio.h>
55 #include <dt-bindings/leds/leds-pca955x.h>
6+#include <dt-bindings/interrupt-controller/irq.h>
67
78 / {
89 model = "FP5280G2 BMC";
@@ -245,7 +246,7 @@ · 236 unmodified lines
245246 label = "bmc";
246247 m25p,fast-read;
247248 spi-max-frequency = <50000000>;
248−#include "openbmc-flash-layout.dtsi"
249+#include "openbmc-flash-layout-64.dtsi"
249250 };
250251 };
251252
@@ -902,4 +903,10 @@ · 650 unmodified lines
902903
903904 };
904905
906+&kcs3 {
907+ status = "okay";
908+ aspeed,lpc-io-reg = <0xca2>;
909+ aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
910+};
911+
905912 #include "ibm-power9-dual.dtsi"
arch/arm/boot/dts/aspeed-bmc-inventec-transformers.dts+328−0
@@ -0,0 +1,328 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later
2+// Copyright 2021 Inventec Corp.
3+
4+/dts-v1/;
5+
6+#include "aspeed-g6.dtsi"
7+#include "aspeed-g6-pinctrl.dtsi"
8+#include <dt-bindings/i2c/i2c.h>
9+#include <dt-bindings/gpio/aspeed-gpio.h>
10+
11+/ {
12+ model = "TRANSFORMERS BMC";
13+ compatible = "inventec,transformer-bmc", "aspeed,ast2600";
14+
15+ aliases {
16+ serial4 = &uart5;
17+ };
18+
19+ chosen {
20+ stdout-path = &uart5;
21+ bootargs = "console=ttyS4,115200n8";
22+ };
23+
24+ memory@80000000 {
25+ device_type = "memory";
26+ reg = <0x80000000 0x80000000>;
27+ };
28+
29+ leds {
30+ compatible = "gpio-leds";
31+
32+ // UID led
33+ uid {
34+ label = "UID_LED";
35+ gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
36+ };
37+
38+ // Heart beat led
39+ heartbeat {
40+ label = "HB_LED";
41+ gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
42+ };
43+ };
44+};
45+
46+&mdio0 {
47+ status = "okay";
48+
49+ ethphy0: ethernet-phy@0 {
50+ compatible = "ethernet-phy-ieee802.3-c22";
51+ reg = <1>;
52+ };
53+};
54+
55+&mac3 {
56+ status = "okay";
57+ phy-mode = "rgmii";
58+ phy-handle = <&ethphy0>;
59+ pinctrl-names = "default";
60+ pinctrl-0 = <&pinctrl_rgmii4_default>;
61+};
62+
63+&fmc {
64+ status = "okay";
65+
66+ flash@0 {
67+ status = "okay";
68+ m25p,fast-read;
69+ label = "bmc";
70+ spi-max-frequency = <33000000>;
71+ spi-tx-bus-width = <2>;
72+ spi-rx-bus-width = <2>;
73+#include "openbmc-flash-layout.dtsi"
74+ };
75+
76+ flash@1 {
77+ status = "okay";
78+ m25p,fast-read;
79+ label = "bmc2";
80+ spi-max-frequency = <33000000>;
81+ spi-tx-bus-width = <2>;
82+ spi-rx-bus-width = <2>;
83+ };
84+};
85+
86+&spi1 {
87+ status = "okay";
88+ pinctrl-names = "default";
89+ pinctrl-0 = <&pinctrl_spi1_default>;
90+
91+ flash@0 {
92+ status = "okay";
93+ m25p,fast-read;
94+ label = "bios";
95+ spi-max-frequency = <33000000>;
96+ spi-tx-bus-width = <1>;
97+ spi-rx-bus-width = <1>;
98+ };
99+};
100+
101+&wdt1 {
102+ status = "okay";
103+};
104+
105+&uart1 {
106+ status = "okay";
107+};
108+
109+&uart5 {
110+ status = "okay";
111+};
112+
113+&i2c0 {
114+ status = "okay";
115+
116+ //Set bmc' slave address;
117+ bmc_slave@10 {
118+ compatible = "ipmb-dev";
119+ reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
120+ i2c-protocol;
121+ };
122+};
123+
124+&i2c2 {
125+ status = "okay";
126+};
127+
128+&i2c3 {
129+ // FRU AT24C512C-SSHM-T
130+ status = "okay";
131+ eeprom@50 {
132+ compatible = "atmel,24c512";
133+ reg = <0x50>;
134+ pagesize = <128>;
135+ };
136+};
137+
138+&i2c5 {
139+ status = "okay";
140+};
141+
142+&i2c6 {
143+ status = "okay";
144+
145+ tmp75@49 {
146+ compatible = "ti,tmp75";
147+ reg = <0x49>;
148+ };
149+
150+ tmp75@4f {
151+ compatible = "ti,tmp75";
152+ reg = <0x4f>;
153+ };
154+
155+ tmp468@48 {
156+ compatible = "ti,tmp468";
157+ reg = <0x48>;
158+ };
159+};
160+
161+&i2c7 {
162+ status = "okay";
163+ adm1278@40 {
164+ compatible = "adi,adm1278";
165+ reg = <0x40>;
166+ };
167+};
168+
169+
170+&i2c8 {
171+ // FRU AT24C512C-SSHM-T
172+ status = "okay";
173+
174+ eeprom@51 {
175+ compatible = "atmel,24c512";
176+ reg = <0x51>;
177+ pagesize = <128>;
178+ };
179+
180+ eeprom@53 {
181+ compatible = "atmel,24c512";
182+ reg = <0x53>;
183+ pagesize = <128>;
184+ };
185+};
186+
187+&i2c9 {
188+ // M.2
189+ status = "okay";
190+};
191+
192+&i2c10 {
193+ // I2C EXPANDER
194+ status = "okay";
195+
196+ i2c-switch@71 {
197+ compatible = "nxp,pca9544";
198+ #address-cells = <1>;
199+ #size-cells = <0>;
200+ reg = <0x71>;
201+ };
202+
203+ i2c-switch@73 {
204+ compatible = "nxp,pca9544";
205+ #address-cells = <1>;
206+ #size-cells = <0>;
207+ reg = <0x73>;
208+ };
209+};
210+
211+&i2c11 {
212+ // I2C EXPANDER
213+ status = "okay";
214+
215+ i2c-switch@70 {
216+ compatible = "nxp,pca9544";
217+ #address-cells = <1>;
218+ #size-cells = <0>;
219+ reg = <0x70>;
220+
221+ pcie_eeprom_riser1: i2c@0 {
222+ #address-cells = <1>;
223+ #size-cells = <0>;
224+ reg = <0>;
225+
226+ eeprom@55 {
227+ compatible = "atmel,24c512";
228+ reg = <0x55>;
229+ pagesize = <128>;
230+ };
231+ };
232+
233+ pcie_eeprom_riser2: i2c@1 {
234+ #address-cells = <1>;
235+ #size-cells = <0>;
236+ reg = <1>;
237+
238+ eeprom@55 {
239+ compatible = "atmel,24c512";
240+ reg = <0x55>;
241+ pagesize = <128>;
242+ };
243+ };
244+
245+ pcie_eeprom_riser3: i2c@2 {
246+ #address-cells = <1>;
247+ #size-cells = <0>;
248+ reg = <2>;
249+
250+ eeprom@55 {
251+ compatible = "atmel,24c512";
252+ reg = <0x55>;
253+ pagesize = <128>;
254+ };
255+ };
256+ };
257+};
258+
259+&i2c12 {
260+ status = "okay";
261+
262+ psu0:psu0@58 {
263+ compatible = "pmbus";
264+ reg = <0x58>;
265+ };
266+};
267+
268+&gpio0 {
269+ status = "okay";
270+ gpio-line-names =
271+ /*A0-A7*/ "","","","","","","","",
272+ /*B0-B7*/ "presence-ps0","power-chassis-good","","","","","presence-ps1","",
273+ /*C0-C7*/ "","","","","","","","",
274+ /*D0-D7*/ "","","","","","","","",
275+ /*E0-E7*/ "","","","","","","","",
276+ /*F0-F7*/ "","","","","power-chassis-control","","","",
277+ /*G0-G7*/ "","","jtag-mux","","","","","",
278+ /*H0-H7*/ "","","","","reset-button","power-button","","",
279+ /*I0-I7*/ "","","","","","","","",
280+ /*J0-J7*/ "","","","","","","","",
281+ /*K0-K7*/ "","","","","","","","",
282+ /*L0-L7*/ "","","","","","","","",
283+ /*M0-M7*/ "","","","","","","","",
284+ /*N0-N7*/ "","","","","","","","",
285+ /*O0-O7*/ "","","","","","","","",
286+ /*P0-P7*/ "","","","tck-mux","","","","",
287+ /*Q0-Q7*/ "","","","","","","","",
288+ /*R0-R7*/ "","","","","","","","",
289+ /*S0-S7*/ "","","","","","","","",
290+ /*T0-T7*/ "","","","","","","","",
291+ /*U0-U7*/ "","nmi-button","","","","","","",
292+ /*V0-V7*/ "","","","","power-config-full-load","","","",
293+ /*W0-W7*/ "","","","","","","","",
294+ /*X0-X7*/ "","","","","","","","",
295+ /*Y0-Y7*/ "","","","","","","","",
296+ /*Z0-Z7*/ "","","","","","","","",
297+ /*AA0-AA7*/ "","","","","","","","",
298+ /*AB0-AB7*/ "","","","","","","","",
299+ /*AC0-AC7*/ "","","","","","","","";
300+};
301+
302+&lpc_snoop {
303+ status = "okay";
304+ snoop-ports = <0x80>;
305+};
306+
307+&emmc_controller {
308+ status = "okay";
309+};
310+
311+&emmc {
312+ status = "okay";
313+ non-removable;
314+ max-frequency = <52000000>;
315+ bus-width = <8>;
316+};
317+
318+&vhub {
319+ status = "okay";
320+ aspeed,vhub-downstream-ports = <7>;
321+ aspeed,vhub-generic-endpoints = <21>;
322+ pinctrl-names = "default";
323+ pinctrl-0 = <&pinctrl_usb2ad_default>;
324+};
325+
326+&rtc {
327+ status = "okay";
328+};
arch/arm/boot/dts/aspeed-bmc-tyan-s7106.dts+488−0
@@ -0,0 +1,488 @@
1+// SPDX-License-Identifier: GPL-2.0+
2+/dts-v1/;
3+
4+#include "aspeed-g5.dtsi"
5+#include <dt-bindings/gpio/aspeed-gpio.h>
6+
7+/ {
8+ model = "Tyan S7106 BMC";
9+ compatible = "tyan,s7106-bmc", "aspeed,ast2500";
10+
11+ chosen {
12+ stdout-path = &uart5;
13+ bootargs = "console=ttyS4,115200 earlycon";
14+ };
15+
16+ memory@80000000 {
17+ device_type = "memory";
18+ reg = <0x80000000 0x20000000>;
19+ };
20+
21+ reserved-memory {
22+ #address-cells = <1>;
23+ #size-cells = <1>;
24+ ranges;
25+
26+ p2a_memory: region@987f0000 {
27+ no-map;
28+ reg = <0x987f0000 0x00010000>; /* 64KB */
29+ };
30+
31+ vga_memory: framebuffer@9f000000 {
32+ no-map;
33+ reg = <0x9f000000 0x01000000>; /* 16M */
34+ };
35+
36+ gfx_memory: framebuffer {
37+ size = <0x01000000>; /* 16M */
38+ alignment = <0x01000000>;
39+ compatible = "shared-dma-pool";
40+ reusable;
41+ };
42+ };
43+
44+ leds {
45+ compatible = "gpio-leds";
46+
47+ identify {
48+ gpios = <&gpio ASPEED_GPIO(A, 2) GPIO_ACTIVE_LOW>;
49+ };
50+
51+ heartbeat {
52+ gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
53+ };
54+ };
55+
56+ iio-hwmon {
57+ compatible = "iio-hwmon";
58+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
59+ <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
60+ <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
61+ <&adc 12>, <&adc 13>, <&adc 14>;
62+ };
63+
64+ iio-hwmon-battery {
65+ compatible = "iio-hwmon";
66+ io-channels = <&adc 15>;
67+ };
68+};
69+
70+&fmc {
71+ status = "okay";
72+ flash@0 {
73+ label = "bmc";
74+ status = "okay";
75+ m25p,fast-read;
76+#include "openbmc-flash-layout.dtsi"
77+ };
78+};
79+
80+&spi1 {
81+ status = "okay";
82+ pinctrl-names = "default";
83+ pinctrl-0 = <&pinctrl_spi1_default>;
84+
85+ flash@0 {
86+ status = "okay";
87+ label = "pnor";
88+ m25p,fast-read;
89+ };
90+};
91+
92+&uart1 {
93+ /* Rear RS-232 connector */
94+ status = "okay";
95+ pinctrl-names = "default";
96+ pinctrl-0 = <&pinctrl_txd1_default
97+ &pinctrl_rxd1_default>;
98+};
99+
100+&uart2 {
101+ /* RS-232 connector on header */
102+ status = "okay";
103+ pinctrl-names = "default";
104+ pinctrl-0 = <&pinctrl_txd2_default
105+ &pinctrl_rxd2_default>;
106+};
107+
108+&uart3 {
109+ /* Alternative to vuart to internally connect (route) to uart1
110+ * when vuart cannot be used due to BIOS limitations.
111+ */
112+ status = "okay";
113+};
114+
115+&uart4 {
116+ /* Alternative to vuart to internally connect (route) to the
117+ * external port usually used by uart1 when vuart cannot be
118+ * used due to BIOS limitations.
119+ */
120+ status = "okay";
121+};
122+
123+&uart5 {
124+ /* BMC "debug" (console) UART; connected to RS-232 connector
125+ * on header; selectable via jumpers as alternative to uart2
126+ */
127+ status = "okay";
128+};
129+
130+&vuart {
131+ status = "okay";
132+};
133+
134+&lpc_ctrl {
135+ status = "okay";
136+};
137+
138+&p2a {
139+ status = "okay";
140+ memory-region = <&p2a_memory>;
141+};
142+
143+&lpc_snoop {
144+ status = "okay";
145+ snoop-ports = <0x80>;
146+};
147+
148+&adc {
149+ status = "okay";
150+};
151+
152+&vhub {
153+ status = "okay";
154+};
155+
156+&pwm_tacho {
157+ status = "okay";
158+ pinctrl-names = "default";
159+ pinctrl-0 = <&pinctrl_pwm0_default
160+ &pinctrl_pwm1_default
161+ &pinctrl_pwm3_default
162+ &pinctrl_pwm4_default>;
163+
164+ /* CPU fan #0 */
165+ fan@0 {
166+ reg = <0x00>;
167+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
168+ };
169+
170+ /* CPU fan #1 */
171+ fan@1 {
172+ reg = <0x01>;
173+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
174+ };
175+
176+ /* PWM group for chassis fans #1, #2, #3 and #4 */
177+ fan@2 {
178+ reg = <0x03>;
179+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
180+ };
181+
182+ fan@3 {
183+ reg = <0x03>;
184+ aspeed,fan-tach-ch = /bits/ 8 <0x03>;
185+ };
186+
187+ fan@4 {
188+ reg = <0x03>;
189+ aspeed,fan-tach-ch = /bits/ 8 <0x04>;
190+ };
191+
192+ fan@5 {
193+ reg = <0x03>;
194+ aspeed,fan-tach-ch = /bits/ 8 <0x05>;
195+ };
196+
197+ /* PWM group for chassis fans #5 and #6 */
198+ fan@6 {
199+ reg = <0x04>;
200+ aspeed,fan-tach-ch = /bits/ 8 <0x06>;
201+ };
202+
203+ fan@7 {
204+ reg = <0x04>;
205+ aspeed,fan-tach-ch = /bits/ 8 <0x07>;
206+ };
207+};
208+
209+&i2c0 {
210+ status = "okay";
211+
212+ /* Hardware monitor with temperature sensors */
213+ nct7802@28 {
214+ compatible = "nuvoton,nct7802";
215+ reg = <0x28>;
216+ };
217+
218+ /* Also connected to:
219+ * - IPMB pin header
220+ * - CPU #0 memory error LED @ 0x3A
221+ * - CPU #1 memory error LED @ 0x3C
222+ */
223+};
224+
225+&i2c1 {
226+ /* Directly connected to PCH SMBUS #0 */
227+ status = "okay";
228+};
229+
230+&i2c2 {
231+ status = "okay";
232+
233+ /* BMC EEPROM, incl. mainboard FRU */
234+ eeprom@50 {
235+ compatible = "atmel,24c256";
236+ reg = <0x50>;
237+ };
238+
239+ /* Also connected to:
240+ * - fan header
241+ * - mini-SAS HD connector
242+ * - SSATA SGPIO
243+ * - via switch (BMC_SMB3_PCH_IE_SML3_EN, active low)
244+ * to PCH SMBUS #3
245+ */
246+};
247+
248+&i2c3 {
249+ status = "okay";
250+
251+ /* PSU1 FRU @ 0xA0 */
252+ eeprom@50 {
253+ compatible = "atmel,24c02";
254+ reg = <0x50>;
255+ };
256+
257+ /* PSU2 FRU @ 0xA2 */
258+ eeprom@51 {
259+ compatible = "atmel,24c02";
260+ reg = <0x51>;
261+ };
262+
263+ /* PSU1 @ 0xB0 */
264+ power-supply@58 {
265+ compatible = "pmbus";
266+ reg = <0x58>;
267+ };
268+
269+ /* PSU2 @ 0xB2 */
270+ power-supply@59 {
271+ compatible = "pmbus";
272+ reg = <0x59>;
273+ };
274+
275+ /* Also connected to:
276+ * - PCH SMBUS #1
277+ */
278+};
279+
280+&i2c4 {
281+ status = "okay";
282+
283+ /* Connected to:
284+ * - PCH SMBUS #2
285+ */
286+
287+ /* Connected via switch to:
288+ * - CPU #0 channels ABC VDDQ @ 0x80
289+ * - CPU #0 channels DEF VDDQ @ 0x81
290+ * - CPU #1 channels ABC VDDQ @ 0x82
291+ * - CPU #1 channels DEF VDDQ @ 0x83
292+ * - CPU #0 VCCIO & VMCP @ 0x52
293+ * - CPU #1 VCCIO & VMCP @ 0x53
294+ * - CPU #0 VCCIN @ 0xC0
295+ * - CPU #0 VSA @ 0xC2
296+ * - CPU #1 VCCIN @ 0xC4
297+ * - CPU #1 VSA @ 0xC6
298+ * - J110
299+ */
300+};
301+
302+&i2c5 {
303+ status = "okay";
304+
305+ /* Connected via switch (PCH_BMC_SMB_SW_P) to:
306+ * - mainboard FRU @ 0xAE
307+ * - XDP connector
308+ * - ME debug header
309+ * - clock buffer @ 0xD8
310+ * - i2c4 via switch (PCH_VR_SMBUS_SW_P; controlled by PCH)
311+ * - PCH SMBUS
312+ */
313+};
314+
315+&i2c6 {
316+ status = "okay";
317+
318+ /* Connected via switch (BMC_PE_SMB_EN_1_N) to
319+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
320+ * - 0,0: PCIE slot 1, SMB #1
321+ * - 0,1: PCIE slot 1, SMB #2
322+ * - 1,0: PCIE slot 2, SMB #1
323+ * - 1,1: PCIE slot 2, SMB #2
324+ */
325+
326+ /* Connected via switch (BMC_PE_SMB_EN_2_N) to
327+ * bus mux (selector BMC_PE_SMB_SW_BIT[1..0]) to:
328+ * - 0,0: OCP0 (A) SMB
329+ * - 0,1: OCP0 (C) SMB
330+ * - 1,0: OCP1 (A) SMB
331+ * - 1,1: NC
332+ */
333+};
334+
335+&i2c7 {
336+ status = "okay";
337+
338+ /* Connected to:
339+ * - PCH SMBUS #4
340+ */
341+};
342+
343+&i2c8 {
344+ status = "okay";
345+
346+ /* Not connected */
347+};
348+
349+&mac0 {
350+ status = "okay";
351+ use-ncsi;
352+ pinctrl-names = "default";
353+ pinctrl-0 = <&pinctrl_rmii1_default>;
354+};
355+
356+&mac1 {
357+ status = "okay";
358+ pinctrl-names = "default";
359+ pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
360+};
361+
362+&ibt {
363+ status = "okay";
364+};
365+
366+&kcs1 {
367+ status = "okay";
368+ aspeed,lpc-io-reg = <0xca8>;
369+};
370+
371+&kcs3 {
372+ status = "okay";
373+ aspeed,lpc-io-reg = <0xca2>;
374+};
375+
376+/* Enable BMC VGA output to show an early (pre-BIOS) boot screen */
377+&gfx {
378+ status = "okay";
379+ memory-region = <&gfx_memory>;
380+};
381+
382+/* We're following the GPIO naming as defined at
383+ * https://github.com/openbmc/docs/blob/master/designs/device-tree-gpio-naming.md.
384+ *
385+ * Notes on led-identify and id-button:
386+ * - A physical button is connected to id-button which
387+ * triggers the clock on a D flip-flop. The /Q output of the
388+ * flip-flop drives its D input.
389+ * - The flip-flop's Q output drives led-identify which is
390+ * connected to LEDs.
391+ * - With that, every button press toggles the LED between on and off.
392+ *
393+ * Notes on power-, reset- and nmi- button and control:
394+ * - The -button signals can be used to monitor physical buttons.
395+ * - The -control signals can be used to actuate the specific
396+ * operation.
397+ * - In hardware, the -button signals are connected to the -control
398+ * signals through drivers with the -control signals being
399+ * protected through diodes.
400+ */
401+&gpio {
402+ status = "okay";
403+ gpio-line-names =
404+ /*A0*/ "",
405+ /*A1*/ "",
406+ /*A2*/ "led-identify", /* in/out: BMC_IDLED_ON_N */
407+ /*A3*/ "",
408+ /*A4*/ "",
409+ /*A5*/ "",
410+ /*A6*/ "",
411+ /*A7*/ "",
412+ /*B0-B7*/ "","","","","","","","",
413+ /*C0*/ "",
414+ /*C1*/ "",
415+ /*C2*/ "",
416+ /*C3*/ "",
417+ /*C4*/ "id-button", /* in/out: BMC_IDBTN_IN_OUT_N */
418+ /*C5*/ "post-complete", /* in: FM_BIOS_POST_CMPLT_N */
419+ /*C6*/ "",
420+ /*C7*/ "",
421+ /*D0*/ "",
422+ /*D1*/ "",
423+ /*D2*/ "power-chassis-good", /* in: SYS_PWROK_BUF */
424+ /*D3*/ "platform-reset", /* in: SYS_PLTRST_N */
425+ /*D4*/ "",
426+ /*D5*/ "",
427+ /*D6*/ "",
428+ /*D7*/ "",
429+ /*E0*/ "power-button", /* in: BMC_PWBTN_IN_N */
430+ /*E1*/ "power-chassis-control", /* out: BMC_PWRBTN_OUT_N */
431+ /*E2*/ "reset-button", /* in: BMC_RSTBTN_IN_N */
432+ /*E3*/ "reset-control", /* out: BMC_RSTBTN_OUT_N */
433+ /*E4*/ "nmi-button", /* in: BMC_NMIBTN_IN_N */
434+ /*E5*/ "nmi-control", /* out: BMC_NMIBTN_OUT_N */
435+ /*E6*/ "",
436+ /*E7*/ "led-heartbeat", /* out: BMC_HEARTBRAT_LED_N */
437+ /*F0*/ "",
438+ /*F1*/ "clear-cmos-control", /* out: BMC_CLR_CMOS_N */
439+ /*F2*/ "",
440+ /*F3*/ "",
441+ /*F4*/ "led-fault", /* out: AST_HW_FAULT_N */
442+ /*F5*/ "",
443+ /*F6*/ "",
444+ /*F7*/ "",
445+ /*G0*/ "BMC_PE_SMB_EN_1_N", /* out */
446+ /*G1*/ "BMC_PE_SMB_EN_2_N", /* out */
447+ /*G2*/ "",
448+ /*G3*/ "",
449+ /*G4*/ "",
450+ /*G5*/ "",
451+ /*G6*/ "",
452+ /*G7*/ "",
453+ /*H0-H7*/ "","","","","","","","",
454+ /*I0-I7*/ "","","","","","","","",
455+ /*J0-J7*/ "","","","","","","","",
456+ /*K0-K7*/ "","","","","","","","",
457+ /*L0-L7*/ "","","","","","","","",
458+ /*M0-M7*/ "","","","","","","","",
459+ /*N0-N7*/ "","","","","","","","",
460+ /*O0-O7*/ "","","","","","","","",
461+ /*P0-P7*/ "","","","","","","","",
462+ /*Q0*/ "",
463+ /*Q1*/ "",
464+ /*Q2*/ "",
465+ /*Q3*/ "",
466+ /*Q4*/ "BMC_PE_SMB_SW_BIT0", /* out */
467+ /*Q5*/ "BMC_PE_SMB_SW_BIT1", /* out */
468+ /*Q6*/ "",
469+ /*Q7*/ "",
470+ /*R0-R7*/ "","","","","","","","",
471+ /*S0-S7*/ "","","","","","","","",
472+ /*T0-T7*/ "","","","","","","","",
473+ /*U0-U7*/ "","","","","","","","",
474+ /*V0-V7*/ "","","","","","","","",
475+ /*W0-W7*/ "","","","","","","","",
476+ /*X0-X7*/ "","","","","","","","",
477+ /*Y0-Y7*/ "","","","","","","","",
478+ /*Z0-Z7*/ "","","","","","","","",
479+ /*AA0*/ "",
480+ /*AA1*/ "",
481+ /*AA2*/ "",
482+ /*AA3*/ "BMC_SMB3_PCH_IE_SML3_EN", /* out */
483+ /*AA4*/ "",
484+ /*AA5*/ "",
485+ /*AA6*/ "",
486+ /*AA7*/ "",
487+ /*AB0-AB7*/ "","","","","","","","";
488+};
arch/arm/boot/dts/aspeed-g4.dtsi+6−0
@@ -383,6 +383,12 @@ · 382 unmodified lines
383383 interrupts = <8>;
384384 status = "disabled";
385385 };
386+
387+ uart_routing: uart-routing@9c {
388+ compatible = "aspeed,ast2400-uart-routing";
389+ reg = <0x9c 0x4>;
390+ status = "disabled";
391+ };
386392 };
387393
388394 uart2: serial@1e78d000 {
arch/arm/boot/dts/aspeed-g5.dtsi+6−0
@@ -491,6 +491,12 @@ · 490 unmodified lines
491491 #reset-cells = <1>;
492492 };
493493
494+ uart_routing: uart-routing@9c {
495+ compatible = "aspeed,ast2500-uart-routing";
496+ reg = <0x9c 0x4>;
497+ status = "disabled";
498+ };
499+
494500 lhc: lhc@a0 {
495501 compatible = "aspeed,ast2500-lhc";
496502 reg = <0xa0 0x24 0xc8 0x8>;
arch/arm/boot/dts/aspeed-g6.dtsi+26−0
@@ -364,6 +364,26 @@ · 363 unmodified lines
364364 status = "disabled";
365365 };
366366
367+ adc0: adc@1e6e9000 {
368+ compatible = "aspeed,ast2600-adc0";
369+ reg = <0x1e6e9000 0x100>;
370+ clocks = <&syscon ASPEED_CLK_APB2>;
371+ resets = <&syscon ASPEED_RESET_ADC>;
372+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
373+ #io-channel-cells = <1>;
374+ status = "disabled";
375+ };
376+
377+ adc1: adc@1e6e9100 {
378+ compatible = "aspeed,ast2600-adc1";
379+ reg = <0x1e6e9100 0x100>;
380+ clocks = <&syscon ASPEED_CLK_APB2>;
381+ resets = <&syscon ASPEED_RESET_ADC>;
382+ interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
383+ #io-channel-cells = <1>;
384+ status = "disabled";
385+ };
386+
367387 gpio0: gpio@1e780000 {
368388 #gpio-cells = <2>;
369389 gpio-controller;
@@ -551,6 +571,12 @@ · 181 unmodified lines
551571 #reset-cells = <1>;
552572 };
553573
574+ uart_routing: uart-routing@98 {
575+ compatible = "aspeed,ast2600-uart-routing";
576+ reg = <0x98 0x8>;
577+ status = "disabled";
578+ };
579+
554580 ibt: ibt@140 {
555581 compatible = "aspeed,ast2600-ibt-bmc";
556582 reg = <0x140 0x18>;
arch/arm/boot/dts/at91-lmu5000.dts+147−0
@@ -0,0 +1,147 @@
1+// SPDX-License-Identifier: GPL-2.0-only
2+/*
3+ * Device Tree file for CalAmp LMU5000 board
4+ *
5+ * Copyright (C) 2013 Adam Porter <porter.adam@gmail.com>
6+ */
7+
8+/dts-v1/;
9+#include "at91sam9g20.dtsi"
10+
11+/ {
12+ model = "CalAmp LMU5000";
13+ compatible = "calamp,lmu5000", "atmel,at91sam9g20", "atmel,at91sam9";
14+
15+ chosen {
16+ bootargs = "mem=64M console=ttyS0,115200 rootfstype=jffs2";
17+ };
18+
19+ memory {
20+ reg = <0x20000000 0x4000000>;
21+ };
22+
23+ clocks {
24+ #address-cells = <1>;
25+ #size-cells = <1>;
26+ ranges;
27+
28+ main_clock: clock@0 {
29+ compatible = "atmel,osc", "fixed-clock";
30+ clock-frequency = <18432000>;
31+ };
32+ };
33+};
34+
35+&dbgu {
36+ status = "okay";
37+};
38+
39+&ebi {
40+ status = "okay";
41+
42+ nand_controller: nand-controller {
43+ pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb>;
44+ pinctrl-names = "default";
45+ status = "okay";
46+
47+ nand@3 {
48+ reg = <0x3 0x0 0x800000>;
49+ rb-gpios = <&pioC 13 GPIO_ACTIVE_HIGH>;
50+ cs-gpios = <&pioC 14 GPIO_ACTIVE_HIGH>;
51+ nand-bus-width = <8>;
52+ nand-ecc-mode = "soft";
53+ nand-on-flash-bbt;
54+ label = "atmel_nand";
55+ status = "okay";
56+
57+ partitions {
58+ compatible = "fixed-partitions";
59+ #address-cells = <1>;
60+ #size-cells = <1>;
61+
62+ kernel@0 {
63+ label = "kernel";
64+ reg = <0x0 0x400000>;
65+ };
66+
67+ rootfs@400000 {
68+ label = "rootfs";
69+ reg = <0x400000 0x3C00000>;
70+ };
71+
72+ user1@4000000 {
73+ label = "user1";
74+ reg = <0x4000000 0x2000000>;
75+ };
76+
77+ user2@6000000 {
78+ label = "user2";
79+ reg = <0x6000000 0x2000000>;
80+ };
81+ };
82+ };
83+ };
84+};
85+
86+&macb0 {
87+ phy-mode = "mii";
88+ status = "okay";
89+};
90+
91+&pinctrl {
92+ board {
93+ pinctrl_pck0_as_mck: pck0_as_mck {
94+ atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
95+ };
96+ };
97+
98+ usb0 {
99+ pinctrl_usb1_vbus_gpio: usb0_vbus_gpio {
100+ atmel,pins = <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
101+ };
102+ };
103+};
104+
105+&ssc0 {
106+ status = "okay";
107+ pinctrl-0 = <&pinctrl_ssc0_tx>;
108+};
109+
110+&uart0 {
111+ status = "okay";
112+};
113+
114+&uart1 {
115+ status = "okay";
116+};
117+
118+&usart0 {
119+ pinctrl-0 =
120+ <&pinctrl_usart0
121+ &pinctrl_usart0_rts
122+ &pinctrl_usart0_cts
123+ &pinctrl_usart0_dtr_dsr
124+ &pinctrl_usart0_dcd
125+ &pinctrl_usart0_ri>;
126+ status = "okay";
127+};
128+
129+&usart2 {
130+ status = "okay";
131+};
132+
133+&usb0 {
134+ num-ports = <2>;
135+ status = "okay";
136+};
137+
138+&usb1 {
139+ pinctrl-names = "default";
140+ pinctrl-0 = <&pinctrl_usb1_vbus_gpio>;
141+ atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>;
142+ status = "okay";
143+};
144+
145+&watchdog {
146+ status = "okay";
147+};
arch/arm/boot/dts/at91-q5xr5.dts+199−0
@@ -0,0 +1,199 @@
1+// SPDX-License-Identifier: GPL-2.0-only
2+/*
3+ * Device Tree file for Exegin Q5xR5 board
4+ *
5+ * Copyright (C) 2014 Owen Kirby <osk@exegin.com>
6+ */
7+
8+/dts-v1/;
9+#include "at91sam9g20.dtsi"
10+
11+/ {
12+ model = "Exegin Q5x (rev5)";
13+ compatible = "exegin,q5xr5", "atmel,at91sam9g20", "atmel,at91sam9";
14+
15+ chosen {
16+ bootargs = "console=ttyS0,115200 rootfstype=squashfs,jffs2";
17+ };
18+
19+ memory {
20+ reg = <0x20000000 0x0>;
21+ };
22+
23+ clocks {
24+ #address-cells = <1>;
25+ #size-cells = <1>;
26+ ranges;
27+
28+ main_clock: clock@0 {
29+ compatible = "atmel,osc", "fixed-clock";
30+ clock-frequency = <18432000>;
31+ };
32+
33+ slow_xtal {
34+ clock-frequency = <32768>;
35+ };
36+
37+ main_xtal {
38+ clock-frequency = <18432000>;
39+ };
40+ };
41+};
42+
43+&dbgu {
44+ status = "okay";
45+};
46+
47+&ebi {
48+ status = "okay";
49+
50+ flash: flash@0 {
51+ compatible = "cfi-flash";
52+ #address-cells = <1>;
53+ #size-cells = <1>;
54+ reg = <0x0 0x1000000 0x800000>;
55+ bank-width = <2>;
56+
57+ partitions {
58+ compatible = "fixed-partitions";
59+ #address-cells = <1>;
60+ #size-cells = <1>;
61+
62+ kernel@0 {
63+ label = "kernel";
64+ reg = <0x0 0x200000>;
65+ };
66+
67+ rootfs@200000 {
68+ label = "rootfs";
69+ reg = <0x200000 0x600000>;
70+ };
71+ };
72+ };
73+};
74+
75+&macb0 {
76+ phy-mode = "mii";
77+ status = "okay";
78+};
79+
80+&pinctrl {
81+ board {
82+ pinctrl_pck0_as_mck: pck0_as_mck {
83+ atmel,pins = <AT91_PIOC 1 AT91_PERIPH_B AT91_PINCTRL_NONE>;
84+ };
85+ };
86+
87+ spi0 {
88+ pinctrl_spi0: spi0-0 {
89+ atmel,pins =
90+ <AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_NONE
91+ AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_NONE
92+ AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
93+ };
94+
95+ pinctrl_spi0_npcs0: spi0_npcs0 {
96+ atmel,pins = <AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
97+ };
98+
99+ pinctrl_spi0_npcs1: spi0_npcs1 {
100+ atmel,pins = <AT91_PIOC 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
101+ };
102+ };
103+
104+ spi1 {
105+ pinctrl_spi1: spi1-0 {
106+ atmel,pins =
107+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE
108+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE
109+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
110+ };
111+
112+ pinctrl_spi1_npcs0: spi1_npcs0 {
113+ atmel,pins = <AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
114+ };
115+
116+ pinctrl_spi1_npcs1: spi1_npcs1 {
117+ atmel,pins = <AT91_PIOC 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
118+ };
119+ };
120+};
121+
122+&spi0 {
123+ pinctrl-names = "default";
124+ pinctrl-0 = <&pinctrl_spi0 &pinctrl_spi0_npcs0 &pinctrl_spi0_npcs1>;
125+ cs-gpios = <&pioA 3 GPIO_ACTIVE_HIGH>, <&pioC 11 GPIO_ACTIVE_LOW>, <0>, <0>;
126+ status = "okay";
127+
128+ m25p80@0 {
129+ compatible = "jedec,spi-nor";
130+ spi-max-frequency = <20000000>;
131+ reg = <0>;
132+ #address-cells = <1>;
133+ #size-cells = <1>;
134+
135+ at91boot@0 {
136+ label = "at91boot";
137+ reg = <0x0 0x4000>;
138+ };
139+
140+ uenv@4000 {
141+ label = "uboot-env";
142+ reg = <0x4000 0x4000>;
143+ };
144+
145+ uboot@8000 {
146+ label = "uboot";
147+ reg = <0x8000 0x3E000>;
148+ };
149+ };
150+
151+ spidev@1 {
152+ compatible = "spidev";
153+ spi-max-frequency = <2000000>;
154+ reg = <1>;
155+ };
156+};
157+
158+&spi1 {
159+ pinctrl-names = "default";
160+ pinctrl-0 = <&pinctrl_spi1 &pinctrl_spi1_npcs0 &pinctrl_spi1_npcs1>;
161+ cs-gpios = <&pioB 3 GPIO_ACTIVE_HIGH>, <&pioC 5 GPIO_ACTIVE_LOW>, <0>, <0>;
162+ status = "okay";
163+
164+ spidev@0 {
165+ compatible = "spidev";
166+ spi-max-frequency = <2000000>;
167+ reg = <0>;
168+ };
169+
170+ spidev@1 {
171+ compatible = "spidev";
172+ spi-max-frequency = <2000000>;
173+ reg = <1>;
174+ };
175+};
176+
177+&usart0 {
178+ pinctrl-0 =
179+ <&pinctrl_usart0
180+ &pinctrl_usart0_rts
181+ &pinctrl_usart0_cts
182+ &pinctrl_usart0_dtr_dsr
183+ &pinctrl_usart0_dcd
184+ &pinctrl_usart0_ri>;
185+ status = "okay";
186+};
187+
188+&usb0 {
189+ num-ports = <2>;
190+ status = "okay";
191+};
192+
193+&usb1 {
194+ status = "okay";
195+};
196+
197+&watchdog {
198+ status = "okay";
199+};
arch/arm/boot/dts/at91-sama5d27_som1.dtsi+11−1
@@ -8,6 +8,7 @@ · 7 unmodified lines
88 */
99 #include "sama5d2.dtsi"
1010 #include "sama5d2-pinfunc.h"
11+#include <dt-bindings/gpio/gpio.h>
1112
1213 / {
1314 model = "Atmel SAMA5D27 SoM1";
@@ -95,8 +96,11 @@ · 81 unmodified lines
9596
9697 i2c0: i2c@f8028000 {
9798 dmas = <0>, <0>;
98− pinctrl-names = "default";
99+ pinctrl-names = "default", "gpio";
99100 pinctrl-0 = <&pinctrl_i2c0_default>;
101+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
102+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
103+ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
100104 status = "okay";
101105
102106 at24@50 {
@@ -113,6 +117,12 @@ · 10 unmodified lines
113117 bias-disable;
114118 };
115119
120+ pinctrl_i2c0_gpio: i2c0_gpio {
121+ pinmux = <PIN_PD21__GPIO>,
122+ <PIN_PD22__GPIO>;
123+ bias-disable;
124+ };
125+
116126 pinctrl_qspi1_default: qspi1_default {
117127 sck_cs {
118128 pinmux = <PIN_PB5__QSPI1_SCK>,
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts+21−2
@@ -130,8 +130,11 @@ · 129 unmodified lines
130130 i2c-analog-filter;
131131 i2c-digital-filter;
132132 i2c-digital-filter-width-ns = <35>;
133− pinctrl-names = "default";
133+ pinctrl-names = "default", "gpio";
134134 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
135+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
136+ sda-gpios = <&pioA PIN_PA24 GPIO_ACTIVE_HIGH>;
137+ scl-gpios = <&pioA PIN_PA23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
135138 status = "okay";
136139 };
137140 };
@@ -215,8 +218,11 @@ · 77 unmodified lines
215218 i2c-analog-filter;
216219 i2c-digital-filter;
217220 i2c-digital-filter-width-ns = <35>;
218− pinctrl-names = "default";
221+ pinctrl-names = "default", "gpio";
219222 pinctrl-0 = <&pinctrl_i2c1_default>;
223+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
224+ sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
225+ scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
220226 status = "okay";
221227 };
222228
@@ -252,6 +258,13 @@ · 29 unmodified lines
252258 bias-disable;
253259 };
254260
261+ pinctrl_i2c1_gpio: i2c1_gpio {
262+ pinmux = <PIN_PD4__GPIO>,
263+ <PIN_PD5__GPIO>;
264+ bias-disable;
265+ };
266+
267+
255268 pinctrl_isc_base: isc_base {
256269 pinmux = <PIN_PC21__ISC_PCK>,
257270 <PIN_PC22__ISC_VSYNC>,
@@ -441,6 +454,12 @@ · 183 unmodified lines
441454 bias-disable;
442455 };
443456
457+ pinctrl_i2c3_gpio: i2c3_gpio {
458+ pinmux = <PIN_PA24__GPIO>,
459+ <PIN_PA23__GPIO>;
460+ bias-disable;
461+ };
462+
444463 pinctrl_flx4_default: flx4_uart_default {
445464 pinmux = <PIN_PC28__FLEXCOM4_IO0>,
446465 <PIN_PC29__FLEXCOM4_IO1>,
arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi+70−0
@@ -30,6 +30,14 @@ · 29 unmodified lines
3030 clock-frequency = <24000000>;
3131 };
3232 };
33+
34+ wifi_pwrseq: wifi_pwrseq {
35+ compatible = "mmc-pwrseq-wilc1000";
36+ reset-gpios = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
37+ powerdown-gpios = <&pioA PIN_PA29 GPIO_ACTIVE_HIGH>;
38+ pinctrl-0 = <&pinctrl_wilc_pwrseq>;
39+ pinctrl-names = "default";
40+ };
3341 };
3442
3543 &flx1 {
@@ -310,5 +318,67 @@ · 274 unmodified lines
310318 <PIN_PB10__QSPI1_IO3>;
311319 bias-pull-up;
312320 };
321+
322+ pinctrl_sdmmc1_default: sdmmc1_default {
323+ cmd-data {
324+ pinmux = <PIN_PA28__SDMMC1_CMD>,
325+ <PIN_PA18__SDMMC1_DAT0>,
326+ <PIN_PA19__SDMMC1_DAT1>,
327+ <PIN_PA20__SDMMC1_DAT2>,
328+ <PIN_PA21__SDMMC1_DAT3>;
329+ bias-disable;
330+ };
331+
332+ conf-ck {
333+ pinmux = <PIN_PA22__SDMMC1_CK>;
334+ bias-disable;
335+ };
336+ };
337+
338+ pinctrl_wilc_default: wilc_default {
339+ conf-irq {
340+ pinmux = <PIN_PB25__GPIO>;
341+ bias-disable;
342+ };
343+ };
344+
345+ pinctrl_wilc_pwrseq: wilc_pwrseq {
346+ conf-ce-nrst {
347+ pinmux = <PIN_PA27__GPIO>,
348+ <PIN_PA29__GPIO>;
349+ bias-disable;
350+ };
351+
352+ conf-rtcclk {
353+ pinmux = <PIN_PB13__PCK1>;
354+ bias-disable;
355+ };
356+ };
357+};
358+
359+&sdmmc1 {
360+ #address-cells = <1>;
361+ #size-cells = <0>;
362+ bus-width = <4>;
363+ pinctrl-names = "default";
364+ pinctrl-0 = <&pinctrl_sdmmc1_default>;
365+ mmc-pwrseq = <&wifi_pwrseq>;
366+ no-1-8-v;
367+ non-removable;
368+ bus-width = <4>;
369+ status = "okay";
370+
371+ wilc: wifi@0 {
372+ reg = <0>;
373+ compatible = "microchip,wilc1000";
374+ pinctrl-names = "default";
375+ pinctrl-0 = <&pinctrl_wilc_default>;
376+ clocks = <&pmc PMC_TYPE_SYSTEM 9>;
377+ clock-names = "rtc";
378+ interrupts = <PIN_PB25 IRQ_TYPE_NONE>;
379+ interrupt-parent = <&pioA>;
380+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
381+ assigned-clock-rates = <32768>;
382+ };
313383 };
314384
arch/arm/boot/dts/at91-sama5d2_icp.dts+20−2
@@ -307,8 +307,11 @@ · 306 unmodified lines
307307 };
308308
309309 &i2c0 { /* mikrobus i2c */
310− pinctrl-names = "default";
310+ pinctrl-names = "default", "gpio";
311311 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
312+ pinctrl-1 = <&pinctrl_i2c0_gpio>;
313+ sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
314+ scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
312315 i2c-digital-filter;
313316 i2c-digital-filter-width-ns = <35>;
314317 status = "okay";
@@ -316,8 +319,11 @@ · 1 unmodified line
316319
317320 &i2c1 {
318321 dmas = <0>, <0>;
319− pinctrl-names = "default";
322+ pinctrl-names = "default", "gpio";
320323 pinctrl-0 = <&pinctrl_i2c1_default>;
324+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
325+ sda-gpios = <&pioA PIN_PD19 GPIO_ACTIVE_HIGH>;
326+ scl-gpios = <&pioA PIN_PD20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321327 i2c-digital-filter;
322328 i2c-digital-filter-width-ns = <35>;
323329 status = "okay";
@@ -402,6 +408,12 @@ · 78 unmodified lines
402408 bias-disable;
403409 };
404410
411+ pinctrl_i2c1_gpio: i2c1_gpio {
412+ pinmux = <PIN_PD19__GPIO>,
413+ <PIN_PD20__GPIO>;
414+ bias-disable;
415+ };
416+
405417 pinctrl_key_gpio_default: key_gpio_default {
406418 pinmux = <PIN_PD0__GPIO>;
407419 bias-pull-up;
@@ -463,6 +475,12 @@ · 55 unmodified lines
463475 bias-disable;
464476 };
465477
478+ pinctrl_i2c0_gpio: i2c0_gpio {
479+ pinmux = <PIN_PD21__GPIO>,
480+ <PIN_PD22__GPIO>;
481+ bias-disable;
482+ };
483+
466484 pinctrl_mikrobus1_an: mikrobus1_an {
467485 pinmux = <PIN_PD26__GPIO>;
468486 bias-disable;
arch/arm/boot/dts/at91-sama7g5ek.dts+20−0
@@ -122,6 +122,14 @@ · 121 unmodified lines
122122 };
123123 };
124124
125+&adc {
126+ vddana-supply = <&vddout25>;
127+ vref-supply = <&vddout25>;
128+ pinctrl-names = "default";
129+ pinctrl-0 = <&pinctrl_mikrobus1_an_default &pinctrl_mikrobus2_an_default>;
130+ status = "okay";
131+};
132+
125133 &cpu0 {
126134 cpu-supply = <&vddcpu>;
127135 };
@@ -679,6 +687,18 @@ · 551 unmodified lines
679687 status = "okay";
680688 };
681689
690+&tcb0 {
691+ timer0: timer@0 {
692+ compatible = "atmel,tcb-timer";
693+ reg = <0>;
694+ };
695+
696+ timer1: timer@1 {
697+ compatible = "atmel,tcb-timer";
698+ reg = <1>;
699+ };
700+};
701+
682702 &trng {
683703 status = "okay";
684704 };
arch/arm/boot/dts/at91-tse850-3.dts+1−1
@@ -262,7 +262,7 @@ · 261 unmodified lines
262262 &macb1 {
263263 status = "okay";
264264
265− phy-mode = "rgmii";
265+ phy-mode = "rmii";
266266
267267 #address-cells = <1>;
268268 #size-cells = <0>;
arch/arm/boot/dts/at91sam9260.dtsi+1−1
@@ -166,7 +166,7 @@ · 165 unmodified lines
166166 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
167167 };
168168
169− pinctrl@fffff400 {
169+ pinctrl: pinctrl@fffff400 {
170170 #address-cells = <1>;
171171 #size-cells = <1>;
172172 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
arch/arm/boot/dts/axp209.dtsi+3−3
@@ -53,7 +53,7 @@ · 52 unmodified lines
5353 interrupt-controller;
5454 #interrupt-cells = <1>;
5555
56− ac_power_supply: ac-power-supply {
56+ ac_power_supply: ac-power {
5757 compatible = "x-powers,axp202-ac-power-supply";
5858 status = "disabled";
5959 };
@@ -69,7 +69,7 @@ · 9 unmodified lines
6969 #gpio-cells = <2>;
7070 };
7171
72− battery_power_supply: battery-power-supply {
72+ battery_power_supply: battery-power {
7373 compatible = "x-powers,axp209-battery-power-supply";
7474 status = "disabled";
7575 };
@@ -112,7 +112,7 @@ · 36 unmodified lines
112112 };
113113 };
114114
115− usb_power_supply: usb-power-supply {
115+ usb_power_supply: usb-power {
116116 compatible = "x-powers,axp202-usb-power-supply";
117117 status = "disabled";
118118 };
arch/arm/boot/dts/axp22x.dtsi+3−3
@@ -52,7 +52,7 @@ · 51 unmodified lines
5252 interrupt-controller;
5353 #interrupt-cells = <1>;
5454
55− ac_power_supply: ac-power-supply {
55+ ac_power_supply: ac-power {
5656 compatible = "x-powers,axp221-ac-power-supply";
5757 status = "disabled";
5858 };
@@ -62,7 +62,7 @@ · 3 unmodified lines
6262 #io-channel-cells = <1>;
6363 };
6464
65− battery_power_supply: battery-power-supply {
65+ battery_power_supply: battery-power {
6666 compatible = "x-powers,axp221-battery-power-supply";
6767 status = "disabled";
6868 };
@@ -163,7 +163,7 @@ · 94 unmodified lines
163163 };
164164 };
165165
166− usb_power_supply: usb_power_supply {
166+ usb_power_supply: usb-power {
167167 compatible = "x-powers,axp221-usb-power-supply";
168168 status = "disabled";
169169 };
arch/arm/boot/dts/axp81x.dtsi+5−5
@@ -48,7 +48,7 @@ · 47 unmodified lines
4848 interrupt-controller;
4949 #interrupt-cells = <1>;
5050
51− ac_power_supply: ac-power-supply {
51+ ac_power_supply: ac-power {
5252 compatible = "x-powers,axp813-ac-power-supply";
5353 status = "disabled";
5454 };
@@ -63,18 +63,18 @@ · 8 unmodified lines
6363 gpio-controller;
6464 #gpio-cells = <2>;
6565
66− gpio0_ldo: gpio0-ldo {
66+ gpio0_ldo: gpio0-ldo-pin {
6767 pins = "GPIO0";
6868 function = "ldo";
6969 };
7070
71− gpio1_ldo: gpio1-ldo {
71+ gpio1_ldo: gpio1-ldo-pin {
7272 pins = "GPIO1";
7373 function = "ldo";
7474 };
7575 };
7676
77− battery_power_supply: battery-power-supply {
77+ battery_power_supply: battery-power {
7878 compatible = "x-powers,axp813-battery-power-supply";
7979 status = "disabled";
8080 };
@@ -172,7 +172,7 @@ · 91 unmodified lines
172172 };
173173 };
174174
175− usb_power_supply: usb-power-supply {
175+ usb_power_supply: usb-power {
176176 compatible = "x-powers,axp813-usb-power-supply";
177177 };
178178 };
arch/arm/boot/dts/bcm-nsp-ax.dtsi+70−0
@@ -0,0 +1,70 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Broadcom Northstar Plus Ax stepping-specific bindings.
4+ * Notable differences from B0+ are the secondary-boot-reg and
5+ * lack of DMA coherency.
6+ */
7+
8+&cpu1 {
9+ secondary-boot-reg = <0xffff042c>;
10+};
11+
12+&dma {
13+ /delete-property/ dma-coherent;
14+};
15+
16+&sdio {
17+ /delete-property/ dma-coherent;
18+};
19+
20+&amac0 {
21+ /delete-property/ dma-coherent;
22+};
23+
24+&amac1 {
25+ /delete-property/ dma-coherent;
26+};
27+
28+&amac2 {
29+ /delete-property/ dma-coherent;
30+};
31+
32+&ehci0 {
33+ /delete-property/ dma-coherent;
34+};
35+
36+&mailbox {
37+ /delete-property/ dma-coherent;
38+};
39+
40+&xhci {
41+ /delete-property/ dma-coherent;
42+};
43+
44+&ehci0 {
45+ /delete-property/ dma-coherent;
46+};
47+
48+&ohci0 {
49+ /delete-property/ dma-coherent;
50+};
51+
52+&i2c0 {
53+ /delete-property/ dma-coherent;
54+};
55+
56+&sata {
57+ /delete-property/ dma-coherent;
58+};
59+
60+&pcie0 {
61+ /delete-property/ dma-coherent;
62+};
63+
64+&pcie1 {
65+ /delete-property/ dma-coherent;
66+};
67+
68+&pcie2 {
69+ /delete-property/ dma-coherent;
70+};
arch/arm/boot/dts/bcm-nsp.dtsi+42−10
@@ -77,7 +77,7 @@ · 76 unmodified lines
7777 interrupt-affinity = <&cpu0>, <&cpu1>;
7878 };
7979
80− mpcore@19000000 {
80+ mpcore-bus@19000000 {
8181 compatible = "simple-bus";
8282 ranges = <0x00000000 0x19000000 0x00023000>;
8383 #address-cells = <1>;
@@ -166,7 +166,7 @@ · 82 unmodified lines
166166 };
167167 };
168168
169− axi@18000000 {
169+ axi: axi@18000000 {
170170 compatible = "simple-bus";
171171 ranges = <0x00000000 0x18000000 0x0011c40c>;
172172 #address-cells = <1>;
@@ -219,7 +219,7 @@ · 46 unmodified lines
219219 status = "disabled";
220220 };
221221
222− sdio: sdhci@21000 {
222+ sdio: mmc@21000 {
223223 compatible = "brcm,sdhci-iproc-cygnus";
224224 reg = <0x21000 0x100>;
225225 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
@@ -310,6 +310,7 @@ · 84 unmodified lines
310310 num-cs = <2>;
311311 #address-cells = <1>;
312312 #size-cells = <0>;
313+ status = "disabled";
313314 };
314315
315316 xhci: usb@29000 {
@@ -362,6 +363,42 @@ · 46 unmodified lines
362363 status = "disabled";
363364 };
364365
366+ mdio: mdio@32000 {
367+ compatible = "brcm,iproc-mdio";
368+ reg = <0x32000 0x8>;
369+ #size-cells = <0>;
370+ #address-cells = <1>;
371+ };
372+
373+ mdio-mux@32000 {
374+ compatible = "mdio-mux-mmioreg", "mdio-mux";
375+ reg = <0x32000 0x4>;
376+ mux-mask = <0x200>;
377+ #address-cells = <1>;
378+ #size-cells = <0>;
379+ mdio-parent-bus = <&mdio>;
380+
381+ mdio_int: mdio@0 {
382+ reg = <0x0>;
383+ #address-cells = <1>;
384+ #size-cells = <0>;
385+
386+ usb3_phy: usb3-phy@10 {
387+ compatible = "brcm,ns-bx-usb3-phy";
388+ reg = <0x10>;
389+ usb3-dmp-syscon = <&usb3_dmp>;
390+ #phy-cells = <0>;
391+ status = "disabled";
392+ };
393+ };
394+
395+ mdio_ext: mdio@200 {
396+ reg = <0x200>;
397+ #address-cells = <1>;
398+ #size-cells = <0>;
399+ };
400+ };
401+
365402 rng: rng@33000 {
366403 compatible = "brcm,bcm-nsp-rng";
367404 reg = <0x33000 0x14>;
@@ -520,13 +557,8 @@ · 152 unmodified lines
520557 };
521558 };
522559
523− usb3_phy: usb3-phy@104000 {
524− compatible = "brcm,ns-bx-usb3-phy";
525− reg = <0x104000 0x1000>,
526− <0x032000 0x1000>;
527− reg-names = "dmp", "ccb-mii";
528− #phy-cells = <0>;
529− status = "disabled";
560+ usb3_dmp: syscon@104000 {
561+ reg = <0x104000 0x1000>;
530562 };
531563 };
532564
arch/arm/boot/dts/bcm2711-rpi-4-b.dts+9−29
@@ -3,6 +3,7 @@ · 2 unmodified lines
33 #include "bcm2711.dtsi"
44 #include "bcm2711-rpi.dtsi"
55 #include "bcm283x-rpi-usb-peripheral.dtsi"
6+#include "bcm283x-rpi-wifi-bt.dtsi"
67
78 / {
89 compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -26,11 +27,6 @@ · 17 unmodified lines
2627 };
2728 };
2829
29− wifi_pwrseq: wifi-pwrseq {
30− compatible = "mmc-pwrseq-simple";
31− reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
32− };
33−
3430 sd_io_1v8_reg: sd_io_1v8_reg {
3531 compatible = "regulator-gpio";
3632 regulator-name = "vdd-sd-io";
@@ -56,6 +52,10 @@ · 19 unmodified lines
5652 };
5753 };
5854
55+&bt {
56+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
57+};
58+
5959 &ddc0 {
6060 status = "okay";
6161 };
@@ -178,23 +178,6 @@ · 116 unmodified lines
178178 status = "okay";
179179 };
180180
181−/* SDHCI is used to control the SDIO for wireless */
182−&sdhci {
183− #address-cells = <1>;
184− #size-cells = <0>;
185− pinctrl-names = "default";
186− pinctrl-0 = <&emmc_gpio34>;
187− bus-width = <4>;
188− non-removable;
189− mmc-pwrseq = <&wifi_pwrseq>;
190− status = "okay";
191−
192− brcmf: wifi@1 {
193− reg = <1>;
194− compatible = "brcm,bcm4329-fmac";
195− };
196−};
197−
198181 /* EMMC2 is used to drive the SD card */
199182 &emmc2 {
200183 vqmmc-supply = <&sd_io_1v8_reg>;
@@ -237,13 +220,6 @@ · 36 unmodified lines
237220 pinctrl-names = "default";
238221 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
239222 uart-has-rtscts;
240− status = "okay";
241−
242− bluetooth {
243− compatible = "brcm,bcm43438-bt";
244− max-speed = <2000000>;
245− shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
246− };
247223 };
248224
249225 /* uart1 is mapped to the pin header */
@@ -260,3 +236,7 @@ · 10 unmodified lines
260236 &vec {
261237 status = "disabled";
262238 };
239+
240+&wifi_pwrseq {
241+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
242+};
arch/arm/boot/dts/bcm2711-rpi-cm4-io.dts+138−0
@@ -0,0 +1,138 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/dts-v1/;
3+#include "bcm2711-rpi-cm4.dtsi"
4+#include "bcm283x-rpi-usb-host.dtsi"
5+
6+/ {
7+ model = "Raspberry Pi Compute Module 4 IO Board";
8+
9+ leds {
10+ led-act {
11+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
12+ };
13+
14+ led-pwr {
15+ label = "PWR";
16+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
17+ default-state = "keep";
18+ linux,default-trigger = "default-on";
19+ };
20+ };
21+};
22+
23+&ddc0 {
24+ status = "okay";
25+};
26+
27+&ddc1 {
28+ status = "okay";
29+};
30+
31+&gpio {
32+ /*
33+ * Parts taken from rpi_SCH_4b_4p0_reduced.pdf and
34+ * the official GPU firmware DT blob.
35+ *
36+ * Legend:
37+ * "FOO" = GPIO line named "FOO" on the schematic
38+ * "FOO_N" = GPIO line named "FOO" on schematic, active low
39+ */
40+ gpio-line-names = "ID_SDA",
41+ "ID_SCL",
42+ "SDA1",
43+ "SCL1",
44+ "GPIO_GCLK",
45+ "GPIO5",
46+ "GPIO6",
47+ "SPI_CE1_N",
48+ "SPI_CE0_N",
49+ "SPI_MISO",
50+ "SPI_MOSI",
51+ "SPI_SCLK",
52+ "GPIO12",
53+ "GPIO13",
54+ /* Serial port */
55+ "TXD1",
56+ "RXD1",
57+ "GPIO16",
58+ "GPIO17",
59+ "GPIO18",
60+ "GPIO19",
61+ "GPIO20",
62+ "GPIO21",
63+ "GPIO22",
64+ "GPIO23",
65+ "GPIO24",
66+ "GPIO25",
67+ "GPIO26",
68+ "GPIO27",
69+ "RGMII_MDIO",
70+ "RGMIO_MDC",
71+ /* Used by BT module */
72+ "CTS0",
73+ "RTS0",
74+ "TXD0",
75+ "RXD0",
76+ /* Used by Wifi */
77+ "SD1_CLK",
78+ "SD1_CMD",
79+ "SD1_DATA0",
80+ "SD1_DATA1",
81+ "SD1_DATA2",
82+ "SD1_DATA3",
83+ /* Shared with SPI flash */
84+ "PWM0_MISO",
85+ "PWM1_MOSI",
86+ "STATUS_LED_G_CLK",
87+ "SPIFLASH_CE_N",
88+ "SDA0",
89+ "SCL0",
90+ "RGMII_RXCLK",
91+ "RGMII_RXCTL",
92+ "RGMII_RXD0",
93+ "RGMII_RXD1",
94+ "RGMII_RXD2",
95+ "RGMII_RXD3",
96+ "RGMII_TXCLK",
97+ "RGMII_TXCTL",
98+ "RGMII_TXD0",
99+ "RGMII_TXD1",
100+ "RGMII_TXD2",
101+ "RGMII_TXD3";
102+};
103+
104+&hdmi0 {
105+ status = "okay";
106+};
107+
108+&hdmi1 {
109+ status = "okay";
110+};
111+
112+&genet {
113+ status = "okay";
114+};
115+
116+&pixelvalve0 {
117+ status = "okay";
118+};
119+
120+&pixelvalve1 {
121+ status = "okay";
122+};
123+
124+&pixelvalve2 {
125+ status = "okay";
126+};
127+
128+&pixelvalve4 {
129+ status = "okay";
130+};
131+
132+&vc4 {
133+ status = "okay";
134+};
135+
136+&vec {
137+ status = "disabled";
138+};
arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi+113−0
@@ -0,0 +1,113 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/dts-v1/;
3+#include "bcm2711.dtsi"
4+#include "bcm2711-rpi.dtsi"
5+#include "bcm283x-rpi-wifi-bt.dtsi"
6+
7+/ {
8+ compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
9+
10+ chosen {
11+ /* 8250 auxiliary UART instead of pl011 */
12+ stdout-path = "serial1:115200n8";
13+ };
14+
15+ sd_io_1v8_reg: sd_io_1v8_reg {
16+ compatible = "regulator-gpio";
17+ regulator-name = "vdd-sd-io";
18+ regulator-min-microvolt = <1800000>;
19+ regulator-max-microvolt = <3300000>;
20+ regulator-boot-on;
21+ regulator-always-on;
22+ regulator-settling-time-us = <5000>;
23+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
24+ states = <1800000 0x1>,
25+ <3300000 0x0>;
26+ status = "okay";
27+ };
28+
29+ sd_vcc_reg: sd_vcc_reg {
30+ compatible = "regulator-fixed";
31+ regulator-name = "vcc-sd";
32+ regulator-min-microvolt = <3300000>;
33+ regulator-max-microvolt = <3300000>;
34+ regulator-boot-on;
35+ enable-active-high;
36+ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
37+ };
38+};
39+
40+&bt {
41+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
42+};
43+
44+/* EMMC2 is used to drive the eMMC */
45+&emmc2 {
46+ bus-width = <8>;
47+ vqmmc-supply = <&sd_io_1v8_reg>;
48+ vmmc-supply = <&sd_vcc_reg>;
49+ broken-cd;
50+ /* Even the IP block is limited to 100 MHz
51+ * this provides a throughput gain
52+ */
53+ mmc-hs200-1_8v;
54+ status = "okay";
55+};
56+
57+&expgpio {
58+ gpio-line-names = "BT_ON",
59+ "WL_ON",
60+ "PWR_LED_OFF",
61+ "ANT1",
62+ "VDD_SD_IO_SEL",
63+ "CAM_GPIO",
64+ "SD_PWR_ON",
65+ "ANT2";
66+
67+ ant1: ant1-hog {
68+ gpio-hog;
69+ gpios = <3 GPIO_ACTIVE_HIGH>;
70+ /* internal antenna enabled */
71+ output-high;
72+ line-name = "ant1";
73+ };
74+
75+ ant2: ant2-hog {
76+ gpio-hog;
77+ gpios = <7 GPIO_ACTIVE_HIGH>;
78+ /* external antenna disabled */
79+ output-low;
80+ line-name = "ant2";
81+ };
82+};
83+
84+&genet {
85+ phy-handle = <&phy1>;
86+ phy-mode = "rgmii-rxid";
87+ status = "okay";
88+};
89+
90+&genet_mdio {
91+ phy1: ethernet-phy@0 {
92+ /* No PHY interrupt */
93+ reg = <0x0>;
94+ };
95+};
96+
97+/* uart0 communicates with the BT module */
98+&uart0 {
99+ pinctrl-names = "default";
100+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
101+ uart-has-rtscts;
102+};
103+
104+/* uart1 is mapped to the pin header */
105+&uart1 {
106+ pinctrl-names = "default";
107+ pinctrl-0 = <&uart1_gpio14>;
108+ status = "okay";
109+};
110+
111+&wifi_pwrseq {
112+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
113+};
arch/arm/boot/dts/bcm2835-rpi-zero-w.dts+8−23
@@ -7,6 +7,7 @@ · 6 unmodified lines
77 #include "bcm2835.dtsi"
88 #include "bcm2835-rpi.dtsi"
99 #include "bcm283x-rpi-usb-otg.dtsi"
10+#include "bcm283x-rpi-wifi-bt.dtsi"
1011
1112 / {
1213 compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
@@ -27,11 +28,10 @@ · 14 unmodified lines
2728 gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
2829 };
2930 };
31+};
3032
31− wifi_pwrseq: wifi-pwrseq {
32− compatible = "mmc-pwrseq-simple";
33− reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
34− };
33+&bt {
34+ shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
3535 };
3636
3737 &gpio {
@@ -110,19 +110,7 @@ · 72 unmodified lines
110110 };
111111
112112 &sdhci {
113− #address-cells = <1>;
114− #size-cells = <0>;
115− pinctrl-names = "default";
116113 pinctrl-0 = <&emmc_gpio34 &gpclk2_gpio43>;
117− bus-width = <4>;
118− mmc-pwrseq = <&wifi_pwrseq>;
119− non-removable;
120− status = "okay";
121−
122− brcmf: wifi@1 {
123− reg = <1>;
124− compatible = "brcm,bcm4329-fmac";
125− };
126114 };
127115
128116 &sdhost {
@@ -135,13 +123,6 @@ · 6 unmodified lines
135123 &uart0 {
136124 pinctrl-names = "default";
137125 pinctrl-0 = <&uart0_gpio32 &uart0_ctsrts_gpio30>;
138− status = "okay";
139−
140− bluetooth {
141− compatible = "brcm,bcm43438-bt";
142− max-speed = <2000000>;
143− shutdown-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
144− };
145126 };
146127
147128 &uart1 {
@@ -149,3 +130,7 @@ · 1 unmodified line
149130 pinctrl-0 = <&uart1_gpio14>;
150131 status = "okay";
151132 };
133+
134+&wifi_pwrseq {
135+ reset-gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
136+};
arch/arm/boot/dts/bcm2837-rpi-3-a-plus.dts+7−29
@@ -3,6 +3,7 @@ · 2 unmodified lines
33 #include "bcm2837.dtsi"
44 #include "bcm2836-rpi.dtsi"
55 #include "bcm283x-rpi-usb-host.dtsi"
6+#include "bcm283x-rpi-wifi-bt.dtsi"
67
78 / {
89 compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
@@ -130,28 +131,6 @@ · 121 unmodified lines
130131 status = "okay";
131132 };
132133
133−/*
134− * SDHCI is used to control the SDIO for wireless
135− *
136− * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
137− * by a single GPIO. We can't give GPIO control to one of the drivers,
138− * otherwise the other part would get unexpectedly disturbed.
139− */
140−&sdhci {
141− #address-cells = <1>;
142− #size-cells = <0>;
143− pinctrl-names = "default";
144− pinctrl-0 = <&emmc_gpio34>;
145− status = "okay";
146− bus-width = <4>;
147− non-removable;
148−
149− brcmf: wifi@1 {
150− reg = <1>;
151− compatible = "brcm,bcm4329-fmac";
152− };
153−};
154−
155134 /* SDHOST is used to drive the SD card */
156135 &sdhost {
157136 pinctrl-names = "default";
@@ -160,16 +139,15 @@ · 2 unmodified lines
160139 bus-width = <4>;
161140 };
162141
163−/* uart0 communicates with the BT module */
142+/* uart0 communicates with the BT module
143+ *
144+ * WL_REG_ON and BT_REG_ON of the CYW43455 Wifi/BT module are driven
145+ * by a single GPIO. We can't give GPIO control to one of the drivers,
146+ * otherwise the other part would get unexpectedly disturbed.
147+ */
164148 &uart0 {
165149 pinctrl-names = "default";
166150 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
167− status = "okay";
168−
169− bluetooth {
170− compatible = "brcm,bcm43438-bt";
171− max-speed = <2000000>;
172− };
173151 };
174152
175153 /* uart1 is mapped to the pin header */
arch/arm/boot/dts/bcm2837-rpi-3-b-plus.dts+8−28
@@ -4,6 +4,7 @@ · 3 unmodified lines
44 #include "bcm2836-rpi.dtsi"
55 #include "bcm283x-rpi-lan7515.dtsi"
66 #include "bcm283x-rpi-usb-host.dtsi"
7+#include "bcm283x-rpi-wifi-bt.dtsi"
78
89 / {
910 compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
@@ -31,11 +32,10 @@ · 21 unmodified lines
3132 linux,default-trigger = "default-on";
3233 };
3334 };
35+};
3436
35− wifi_pwrseq: wifi-pwrseq {
36− compatible = "mmc-pwrseq-simple";
37− reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
38− };
37+&bt {
38+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
3939 };
4040
4141 &firmware {
@@ -137,23 +137,6 @@ · 95 unmodified lines
137137 status = "okay";
138138 };
139139
140−/* SDHCI is used to control the SDIO for wireless */
141−&sdhci {
142− #address-cells = <1>;
143− #size-cells = <0>;
144− pinctrl-names = "default";
145− pinctrl-0 = <&emmc_gpio34>;
146− status = "okay";
147− bus-width = <4>;
148− non-removable;
149− mmc-pwrseq = <&wifi_pwrseq>;
150−
151− brcmf: wifi@1 {
152− reg = <1>;
153− compatible = "brcm,bcm4329-fmac";
154− };
155−};
156−
157140 /* SDHOST is used to drive the SD card */
158141 &sdhost {
159142 pinctrl-names = "default";
@@ -166,13 +149,6 @@ · 6 unmodified lines
166149 &uart0 {
167150 pinctrl-names = "default";
168151 pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
169− status = "okay";
170−
171− bluetooth {
172− compatible = "brcm,bcm43438-bt";
173− max-speed = <2000000>;
174− shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
175− };
176152 };
177153
178154 /* uart1 is mapped to the pin header */
@@ -181,3 +157,7 @@ · 2 unmodified lines
181157 pinctrl-0 = <&uart1_gpio14>;
182158 status = "okay";
183159 };
160+
161+&wifi_pwrseq {
162+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
163+};
arch/arm/boot/dts/bcm2837-rpi-3-b.dts+8−28
@@ -4,6 +4,7 @@ · 3 unmodified lines
44 #include "bcm2836-rpi.dtsi"
55 #include "bcm283x-rpi-smsc9514.dtsi"
66 #include "bcm283x-rpi-usb-host.dtsi"
7+#include "bcm283x-rpi-wifi-bt.dtsi"
78
89 / {
910 compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
@@ -24,11 +25,10 @@ · 14 unmodified lines
2425 gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
2526 };
2627 };
28+};
2729
28− wifi_pwrseq: wifi-pwrseq {
29− compatible = "mmc-pwrseq-simple";
30− reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
31− };
30+&bt {
31+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
3232 };
3333
3434 &firmware {
@@ -134,13 +134,6 @@ · 99 unmodified lines
134134 &uart0 {
135135 pinctrl-names = "default";
136136 pinctrl-0 = <&uart0_gpio32 &gpclk2_gpio43>;
137− status = "okay";
138−
139− bluetooth {
140− compatible = "brcm,bcm43438-bt";
141− max-speed = <2000000>;
142− shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
143− };
144137 };
145138
146139 /* uart1 is mapped to the pin header */
@@ -150,23 +143,6 @@ · 3 unmodified lines
150143 status = "okay";
151144 };
152145
153−/* SDHCI is used to control the SDIO for wireless */
154−&sdhci {
155− #address-cells = <1>;
156− #size-cells = <0>;
157− pinctrl-names = "default";
158− pinctrl-0 = <&emmc_gpio34>;
159− status = "okay";
160− bus-width = <4>;
161− non-removable;
162− mmc-pwrseq = <&wifi_pwrseq>;
163−
164− brcmf: wifi@1 {
165− reg = <1>;
166− compatible = "brcm,bcm4329-fmac";
167− };
168−};
169−
170146 /* SDHOST is used to drive the SD card */
171147 &sdhost {
172148 pinctrl-names = "default";
@@ -174,3 +150,7 @@ · 1 unmodified line
174150 status = "okay";
175151 bus-width = <4>;
176152 };
153+
154+&wifi_pwrseq {
155+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
156+};
arch/arm/boot/dts/bcm283x-rpi-wifi-bt.dtsi+34−0
@@ -0,0 +1,34 @@
1+// SPDX-License-Identifier: GPL-2.0
2+
3+/ {
4+ wifi_pwrseq: wifi-pwrseq {
5+ compatible = "mmc-pwrseq-simple";
6+ };
7+};
8+
9+/* SDHCI is used to control the SDIO for wireless */
10+&sdhci {
11+ #address-cells = <1>;
12+ #size-cells = <0>;
13+ pinctrl-names = "default";
14+ pinctrl-0 = <&emmc_gpio34>;
15+ bus-width = <4>;
16+ non-removable;
17+ mmc-pwrseq = <&wifi_pwrseq>;
18+ status = "okay";
19+
20+ brcmf: wifi@1 {
21+ reg = <1>;
22+ compatible = "brcm,bcm4329-fmac";
23+ };
24+};
25+
26+/* uart0 communicates with the BT module */
27+&uart0 {
28+ status = "okay";
29+
30+ bt: bluetooth {
31+ compatible = "brcm,bcm43438-bt";
32+ max-speed = <2000000>;
33+ };
34+};
arch/arm/boot/dts/bcm4708-netgear-r6250.dts+38−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
2020 bootargs = "console=ttyS0,115200 earlycon";
2121 };
2222
23− memory {
23+ memory@0 {
2424 device_type = "memory";
2525 reg = <0x00000000 0x08000000>,
2626 <0x88000000 0x08000000>;
@@ -94,3 +94,40 @@ · 67 unmodified lines
9494 &usb3_phy {
9595 status = "okay";
9696 };
97+
98+&srab {
99+ status = "okay";
100+
101+ ports {
102+ port@0 {
103+ reg = <0>;
104+ label = "lan4";
105+ };
106+
107+ port@1 {
108+ reg = <1>;
109+ label = "lan3";
110+ };
111+
112+ port@2 {
113+ reg = <2>;
114+ label = "lan2";
115+ };
116+
117+ port@3 {
118+ reg = <3>;
119+ label = "lan1";
120+ };
121+
122+ port@4 {
123+ reg = <4>;
124+ label = "wan";
125+ };
126+
127+ port@5 {
128+ reg = <5>;
129+ label = "cpu";
130+ ethernet = <&gmac0>;
131+ };
132+ };
133+};
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts+37−0
@@ -117,3 +117,40 @@ · 116 unmodified lines
117117 };
118118 };
119119 };
120+
121+&srab {
122+ status = "okay";
123+
124+ ports {
125+ port@0 {
126+ reg = <0>;
127+ label = "lan1";
128+ };
129+
130+ port@1 {
131+ reg = <1>;
132+ label = "lan2";
133+ };
134+
135+ port@2 {
136+ reg = <2>;
137+ label = "lan3";
138+ };
139+
140+ port@3 {
141+ reg = <3>;
142+ label = "lan4";
143+ };
144+
145+ port@4 {
146+ reg = <4>;
147+ label = "wan";
148+ };
149+
150+ port@5 {
151+ reg = <5>;
152+ label = "cpu";
153+ ethernet = <&gmac0>;
154+ };
155+ };
156+};
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
1919 bootargs = "console=ttyS0,115200";
2020 };
2121
22− memory {
22+ memory@0 {
2323 device_type = "memory";
2424 reg = <0x00000000 0x08000000>,
2525 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
1919 bootargs = "console=ttyS0,115200";
2020 };
2121
22− memory {
22+ memory@0 {
2323 device_type = "memory";
2424 reg = <0x00000000 0x08000000>,
2525 <0x88000000 0x18000000>;
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts+1−1
@@ -16,7 +16,7 @@ · 15 unmodified lines
1616 bootargs = "console=ttyS0,115200";
1717 };
1818
19− memory {
19+ memory@0 {
2020 device_type = "memory";
2121 reg = <0x00000000 0x08000000>,
2222 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-netgear-r7000.dts+1−1
@@ -19,7 +19,7 @@ · 18 unmodified lines
1919 bootargs = "console=ttyS0,115200";
2020 };
2121
22− memory {
22+ memory@0 {
2323 device_type = "memory";
2424 reg = <0x00000000 0x08000000>,
2525 <0x88000000 0x08000000>;
arch/arm/boot/dts/bcm4709-netgear-r8000.dts+43−1
@@ -30,7 +30,7 @@ · 29 unmodified lines
3030 bootargs = "console=ttyS0,115200";
3131 };
3232
33− memory {
33+ memory@0 {
3434 device_type = "memory";
3535 reg = <0x00000000 0x08000000>,
3636 <0x88000000 0x08000000>;
@@ -187,3 +187,45 @@ · 150 unmodified lines
187187 &usb3_phy {
188188 status = "okay";
189189 };
190+
191+&srab {
192+ status = "okay";
193+
194+ ports {
195+ port@0 {
196+ reg = <0>;
197+ label = "lan1";
198+ };
199+
200+ port@1 {
201+ reg = <1>;
202+ label = "lan2";
203+ };
204+
205+ port@2 {
206+ reg = <2>;
207+ label = "lan3";
208+ };
209+
210+ port@3 {
211+ reg = <3>;
212+ label = "lan4";
213+ };
214+
215+ port@4 {
216+ reg = <4>;
217+ label = "wan";
218+ };
219+
220+ port@8 {
221+ reg = <8>;
222+ label = "cpu";
223+ ethernet = <&gmac2>;
224+
225+ fixed-link {
226+ speed = <1000>;
227+ full-duplex;
228+ };
229+ };
230+ };
231+};
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts+1−1
@@ -15,7 +15,7 @@ · 14 unmodified lines
1515 bootargs = "console=ttyS0,115200 earlycon";
1616 };
1717
18− memory {
18+ memory@0 {
1919 device_type = "memory";
2020 reg = <0x00000000 0x08000000>;
2121 };
arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts+200−0
@@ -0,0 +1,200 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Copyright (C) 2021 Arınç ÜNAL <arinc.unal@arinc9.com>
4+ */
5+
6+/dts-v1/;
7+
8+#include "bcm47094.dtsi"
9+#include "bcm5301x-nand-cs0-bch8.dtsi"
10+
11+/ {
12+ compatible = "asus,rt-ac88u", "brcm,bcm47094", "brcm,bcm4708";
13+ model = "Asus RT-AC88U";
14+
15+ chosen {
16+ bootargs = "earlycon";
17+ };
18+
19+ memory@0 {
20+ device_type = "memory";
21+ reg = <0x00000000 0x08000000>,
22+ <0x88000000 0x18000000>;
23+ };
24+
25+ nvram@1c080000 {
26+ compatible = "brcm,nvram";
27+ reg = <0x1c080000 0x00180000>;
28+ };
29+
30+ leds {
31+ compatible = "gpio-leds";
32+
33+ power {
34+ label = "white:power";
35+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
36+ linux,default-trigger = "default-on";
37+ };
38+
39+ wan-red {
40+ label = "red:wan";
41+ gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
42+ };
43+
44+ lan {
45+ label = "white:lan";
46+ gpios = <&chipcommon 21 GPIO_ACTIVE_LOW>;
47+ };
48+
49+ usb2 {
50+ label = "white:usb2";
51+ gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
52+ trigger-sources = <&ehci_port2>;
53+ linux,default-trigger = "usbport";
54+ };
55+
56+ usb3 {
57+ label = "white:usb3";
58+ gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
59+ trigger-sources = <&ehci_port1>, <&xhci_port1>;
60+ linux,default-trigger = "usbport";
61+ };
62+
63+ wps {
64+ label = "white:wps";
65+ gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
66+ };
67+ };
68+
69+ gpio-keys {
70+ compatible = "gpio-keys";
71+ #address-cells = <1>;
72+ #size-cells = <0>;
73+
74+ wps {
75+ label = "WPS";
76+ linux,code = <KEY_WPS_BUTTON>;
77+ gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
78+ };
79+
80+ reset {
81+ label = "Reset";
82+ linux,code = <KEY_RESTART>;
83+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
84+ };
85+
86+ wifi {
87+ label = "Wi-Fi";
88+ linux,code = <KEY_RFKILL>;
89+ gpios = <&chipcommon 18 GPIO_ACTIVE_LOW>;
90+ };
91+
92+ led {
93+ label = "Backlight";
94+ linux,code = <KEY_BRIGHTNESS_ZERO>;
95+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
96+ };
97+ };
98+};
99+
100+&srab {
101+ compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
102+ status = "okay";
103+ dsa,member = <0 0>;
104+
105+ ports {
106+ #address-cells = <1>;
107+ #size-cells = <0>;
108+
109+ port@0 {
110+ reg = <0>;
111+ label = "lan4";
112+ };
113+
114+ port@1 {
115+ reg = <1>;
116+ label = "lan3";
117+ };
118+
119+ port@2 {
120+ reg = <2>;
121+ label = "lan2";
122+ };
123+
124+ port@3 {
125+ reg = <3>;
126+ label = "lan1";
127+ };
128+
129+ port@4 {
130+ reg = <4>;
131+ label = "wan";
132+ };
133+
134+ sw0_p5: port@5 {
135+ reg = <5>;
136+ label = "extsw";
137+
138+ fixed-link {
139+ speed = <1000>;
140+ full-duplex;
141+ };
142+ };
143+
144+ port@7 {
145+ reg = <7>;
146+ ethernet = <&gmac1>;
147+ label = "cpu";
148+
149+ fixed-link {
150+ speed = <1000>;
151+ full-duplex;
152+ };
153+ };
154+
155+ port@8 {
156+ reg = <8>;
157+ ethernet = <&gmac2>;
158+ label = "cpu";
159+ status = "disabled";
160+
161+ fixed-link {
162+ speed = <1000>;
163+ full-duplex;
164+ };
165+ };
166+ };
167+};
168+
169+&usb2 {
170+ vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
171+};
172+
173+&usb3_phy {
174+ status = "okay";
175+};
176+
177+&nandcs {
178+ partitions {
179+ compatible = "fixed-partitions";
180+ #address-cells = <1>;
181+ #size-cells = <1>;
182+
183+ partition@0 {
184+ label = "boot";
185+ reg = <0x00000000 0x00080000>;
186+ read-only;
187+ };
188+
189+ partition@80000 {
190+ label = "nvram";
191+ reg = <0x00080000 0x00180000>;
192+ };
193+
194+ partition@200000 {
195+ label = "firmware";
196+ reg = <0x00200000 0x07e00000>;
197+ compatible = "brcm,trx";
198+ };
199+ };
200+};
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts+42−0
@@ -118,3 +118,45 @@ · 117 unmodified lines
118118 &usb3_phy {
119119 status = "okay";
120120 };
121+
122+&srab {
123+ status = "okay";
124+
125+ ports {
126+ port@0 {
127+ reg = <0>;
128+ label = "lan4";
129+ };
130+
131+ port@1 {
132+ reg = <1>;
133+ label = "lan3";
134+ };
135+
136+ port@2 {
137+ reg = <2>;
138+ label = "lan2";
139+ };
140+
141+ port@3 {
142+ reg = <3>;
143+ label = "lan1";
144+ };
145+
146+ port@4 {
147+ reg = <4>;
148+ label = "wan";
149+ };
150+
151+ port@8 {
152+ reg = <8>;
153+ label = "cpu";
154+ ethernet = <&gmac2>;
155+
156+ fixed-link {
157+ speed = <1000>;
158+ full-duplex;
159+ };
160+ };
161+ };
162+};
arch/arm/boot/dts/bcm47094-linksys-panamera.dts+1−1
@@ -129,7 +129,7 @@ · 128 unmodified lines
129129 };
130130 };
131131
132− mdio-bus-mux@18003000 {
132+ mdio-mux@18003000 {
133133
134134 /* BIT(9) = 1 => external mdio */
135135 mdio@200 {
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts+37−0
@@ -68,3 +68,40 @@ · 67 unmodified lines
6868 &usb3_phy {
6969 status = "okay";
7070 };
71+
72+&srab {
73+ status = "okay";
74+
75+ ports {
76+ port@0 {
77+ reg = <0>;
78+ label = "wan";
79+ };
80+
81+ port@1 {
82+ reg = <1>;
83+ label = "lan4";
84+ };
85+
86+ port@2 {
87+ reg = <2>;
88+ label = "lan3";
89+ };
90+
91+ port@3 {
92+ reg = <3>;
93+ label = "lan2";
94+ };
95+
96+ port@4 {
97+ reg = <4>;
98+ label = "lan1";
99+ };
100+
101+ port@5 {
102+ reg = <5>;
103+ label = "cpu";
104+ ethernet = <&gmac0>;
105+ };
106+ };
107+};
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts+37−0
@@ -68,3 +68,40 @@ · 67 unmodified lines
6868 &usb3_phy {
6969 status = "okay";
7070 };
71+
72+&srab {
73+ status = "okay";
74+
75+ ports {
76+ port@0 {
77+ reg = <0>;
78+ label = "wan";
79+ };
80+
81+ port@1 {
82+ reg = <1>;
83+ label = "lan4";
84+ };
85+
86+ port@2 {
87+ reg = <2>;
88+ label = "lan3";
89+ };
90+
91+ port@3 {
92+ reg = <3>;
93+ label = "lan2";
94+ };
95+
96+ port@4 {
97+ reg = <4>;
98+ label = "lan1";
99+ };
100+
101+ port@5 {
102+ reg = <5>;
103+ label = "cpu";
104+ ethernet = <&gmac0>;
105+ };
106+ };
107+};
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts+1−1
@@ -16,7 +16,7 @@ · 15 unmodified lines
1616 bootargs = "earlycon";
1717 };
1818
19− memory {
19+ memory@0 {
2020 device_type = "memory";
2121 reg = <0x00000000 0x08000000>,
2222 <0x88000000 0x18000000>;
arch/arm/boot/dts/bcm47189-tenda-ac9.dts+37−0
@@ -105,3 +105,40 @@ · 104 unmodified lines
105105 };
106106 };
107107 };
108+
109+&switch {
110+ status = "okay";
111+
112+ ports {
113+ port@0 {
114+ reg = <0>;
115+ label = "wan";
116+ };
117+
118+ port@1 {
119+ reg = <1>;
120+ label = "lan1";
121+ };
122+
123+ port@2 {
124+ reg = <2>;
125+ label = "lan2";
126+ };
127+
128+ port@3 {
129+ reg = <3>;
130+ label = "lan3";
131+ };
132+
133+ port@4 {
134+ reg = <4>;
135+ label = "lan4";
136+ };
137+
138+ port@5 {
139+ reg = <5>;
140+ label = "cpu";
141+ ethernet = <&gmac0>;
142+ };
143+ };
144+};
arch/arm/boot/dts/bcm53016-meraki-mr32.dts+34−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
2020 bootargs = " console=ttyS0,115200n8 earlycon";
2121 };
2222
23− memory {
23+ memory@0 {
2424 reg = <0x00000000 0x08000000>;
2525 device_type = "memory";
2626 };
@@ -110,6 +110,12 @@ · 83 unmodified lines
110110 reg = <0x50>;
111111 pagesize = <32>;
112112 read-only;
113+ #address-cells = <1>;
114+ #size-cells = <1>;
115+
116+ mac_address: mac-address@66 {
117+ reg = <0x66 0x6>;
118+ };
113119 };
114120 };
115121 };
@@ -133,6 +139,11 @@ · 17 unmodified lines
133139 */
134140 };
135141
142+&gmac0 {
143+ nvmem-cell-names = "mac-address";
144+ nvmem-cells = <&mac_address>;
145+};
146+
136147 &gmac1 {
137148 status = "disabled";
138149 };
@@ -195,3 +206,25 @@ · 56 unmodified lines
195206 };
196207 };
197208 };
209+
210+&srab {
211+ status = "okay";
212+
213+ ports {
214+ port@0 {
215+ reg = <0>;
216+ label = "poe";
217+ };
218+
219+ port@5 {
220+ reg = <5>;
221+ label = "cpu";
222+ ethernet = <&gmac0>;
223+
224+ fixed-link {
225+ speed = <1000>;
226+ duplex-full;
227+ };
228+ };
229+ };
230+};
arch/arm/boot/dts/bcm5301x.dtsi+5−5
@@ -19,7 +19,7 @@ · 18 unmodified lines
1919 #size-cells = <1>;
2020 interrupt-parent = <&gic>;
2121
22− chipcommonA@18000000 {
22+ chipcommon-a-bus@18000000 {
2323 compatible = "simple-bus";
2424 ranges = <0x00000000 0x18000000 0x00001000>;
2525 #address-cells = <1>;
@@ -44,7 +44,7 @@ · 18 unmodified lines
4444 };
4545 };
4646
47− mpcore@19000000 {
47+ mpcore-bus@19000000 {
4848 compatible = "simple-bus";
4949 ranges = <0x00000000 0x19000000 0x00023000>;
5050 #address-cells = <1>;
@@ -369,8 +369,8 @@ · 318 unmodified lines
369369 #address-cells = <1>;
370370 };
371371
372− mdio-bus-mux@18003000 {
373− compatible = "mdio-mux-mmioreg";
372+ mdio-mux@18003000 {
373+ compatible = "mdio-mux-mmioreg", "mdio-mux";
374374 mdio-parent-bus = <&mdio>;
375375 #address-cells = <1>;
376376 #size-cells = <0>;
@@ -415,7 +415,7 @@ · 38 unmodified lines
415415 status = "disabled";
416416 };
417417
418− dmu@1800c000 {
418+ dmu-bus@1800c000 {
419419 compatible = "simple-bus";
420420 ranges = <0 0x1800c000 0x1000>;
421421 #address-cells = <1>;
arch/arm/boot/dts/bcm53573.dtsi+18−0
@@ -180,6 +180,24 @@ · 179 unmodified lines
180180
181181 gmac0: ethernet@5000 {
182182 reg = <0x5000 0x1000>;
183+
184+ mdio {
185+ #address-cells = <1>;
186+ #size-cells = <0>;
187+
188+ switch: switch@1e {
189+ compatible = "brcm,bcm53125";
190+ reg = <0x1e>;
191+
192+ status = "disabled";
193+
194+ /* ports are defined in board DTS */
195+ ports {
196+ #address-cells = <1>;
197+ #size-cells = <0>;
198+ };
199+ };
200+ };
183201 };
184202
185203 gmac1: ethernet@b000 {
arch/arm/boot/dts/bcm94708.dts+1−1
@@ -38,7 +38,7 @@ · 37 unmodified lines
3838 model = "NorthStar SVK (BCM94708)";
3939 compatible = "brcm,bcm94708", "brcm,bcm4708";
4040
41− memory {
41+ memory@0 {
4242 device_type = "memory";
4343 reg = <0x00000000 0x08000000>;
4444 };
arch/arm/boot/dts/bcm94709.dts+1−1
@@ -38,7 +38,7 @@ · 37 unmodified lines
3838 model = "NorthStar SVK (BCM94709)";
3939 compatible = "brcm,bcm94709", "brcm,bcm4709", "brcm,bcm4708";
4040
41− memory {
41+ memory@0 {
4242 device_type = "memory";
4343 reg = <0x00000000 0x08000000>;
4444 };
arch/arm/boot/dts/bcm958522er.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM958522ER)";
40− compatible = "brcm,bcm58522", "brcm,nsp";
40+ compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -134,6 +134,7 @@ · 90 unmodified lines
134134 };
135135
136136 &qspi {
137+ status = "okay";
137138 bspi-sel = <0>;
138139 flash: m25p80@0 {
139140 #address-cells = <1>;
arch/arm/boot/dts/bcm958525er.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM958525ER)";
40− compatible = "brcm,bcm58525", "brcm,nsp";
40+ compatible = "brcm,bcm958525er", "brcm,bcm58525", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -134,6 +134,7 @@ · 90 unmodified lines
134134 };
135135
136136 &qspi {
137+ status = "okay";
137138 bspi-sel = <0>;
138139 flash: m25p80@0 {
139140 #address-cells = <1>;
arch/arm/boot/dts/bcm958525xmc.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus XMC (BCM958525xmc)";
40− compatible = "brcm,bcm58525", "brcm,nsp";
40+ compatible = "brcm,bcm958525xmc", "brcm,bcm58525", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -150,6 +150,7 @@ · 106 unmodified lines
150150 };
151151
152152 &qspi {
153+ status = "okay";
153154 bspi-sel = <0>;
154155 flash: m25p80@0 {
155156 #address-cells = <1>;
arch/arm/boot/dts/bcm958622hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM958622HR)";
40− compatible = "brcm,bcm58622", "brcm,nsp";
40+ compatible = "brcm,bcm958622hr", "brcm,bcm58622", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -138,6 +138,7 @@ · 94 unmodified lines
138138 };
139139
140140 &qspi {
141+ status = "okay";
141142 bspi-sel = <0>;
142143 flash: m25p80@0 {
143144 #address-cells = <1>;
arch/arm/boot/dts/bcm958623hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM958623HR)";
40− compatible = "brcm,bcm58623", "brcm,nsp";
40+ compatible = "brcm,bcm958623hr", "brcm,bcm58623", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -142,6 +142,7 @@ · 98 unmodified lines
142142 };
143143
144144 &qspi {
145+ status = "okay";
145146 bspi-sel = <0>;
146147 flash: m25p80@0 {
147148 #address-cells = <1>;
arch/arm/boot/dts/bcm958625-meraki-alamo.dtsi+281−0
@@ -0,0 +1,281 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX65 series (Alamo).
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+#include "bcm958625-meraki-mx6x-common.dtsi"
9+
10+/ {
11+ keys {
12+ compatible = "gpio-keys-polled";
13+ autorepeat;
14+ poll-interval = <20>;
15+
16+ reset {
17+ label = "reset";
18+ linux,code = <KEY_RESTART>;
19+ gpios = <&gpioa 8 GPIO_ACTIVE_LOW>;
20+ };
21+ };
22+
23+ leds {
24+ compatible = "gpio-leds";
25+
26+ led-0 {
27+ /* green:wan1-left */
28+ function = LED_FUNCTION_ACTIVITY;
29+ function-enumerator = <0>;
30+ color = <LED_COLOR_ID_GREEN>;
31+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
32+ };
33+
34+ led-1 {
35+ /* green:wan1-right */
36+ function = LED_FUNCTION_ACTIVITY;
37+ function-enumerator = <1>;
38+ color = <LED_COLOR_ID_GREEN>;
39+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
40+ };
41+
42+ led-2 {
43+ /* green:wan2-left */
44+ function = LED_FUNCTION_ACTIVITY;
45+ function-enumerator = <2>;
46+ color = <LED_COLOR_ID_GREEN>;
47+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
48+ };
49+
50+ led-3 {
51+ /* green:wan2-right */
52+ function = LED_FUNCTION_ACTIVITY;
53+ function-enumerator = <3>;
54+ color = <LED_COLOR_ID_GREEN>;
55+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
56+ };
57+
58+ led-4 {
59+ /* amber:power */
60+ function = LED_FUNCTION_POWER;
61+ color = <LED_COLOR_ID_AMBER>;
62+ gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>;
63+ default-state = "on";
64+ };
65+
66+ led-5 {
67+ /* white:status */
68+ function = LED_FUNCTION_STATUS;
69+ color = <LED_COLOR_ID_WHITE>;
70+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
71+ };
72+ };
73+};
74+
75+&axi {
76+ mdio-mux@3f1c0 {
77+ compatible = "mdio-mux-mmioreg", "mdio-mux";
78+ reg = <0x3f1c0 0x4>;
79+ mux-mask = <0x2000>;
80+ mdio-parent-bus = <&mdio_ext>;
81+ #address-cells = <1>;
82+ #size-cells = <0>;
83+
84+ mdio@0 {
85+ reg = <0x0>;
86+ #address-cells = <1>;
87+ #size-cells = <0>;
88+
89+ phy_port6: phy@0 {
90+ reg = <0>;
91+ };
92+
93+ phy_port7: phy@1 {
94+ reg = <1>;
95+ };
96+
97+ phy_port8: phy@2 {
98+ reg = <2>;
99+ };
100+
101+ phy_port9: phy@3 {
102+ reg = <3>;
103+ };
104+
105+ phy_port10: phy@4 {
106+ reg = <4>;
107+ };
108+
109+ switch@10 {
110+ compatible = "qca,qca8337";
111+ reg = <0x10>;
112+ dsa,member = <1 0>;
113+
114+ ports {
115+ #address-cells = <1>;
116+ #size-cells = <0>;
117+ port@0 {
118+ reg = <0>;
119+ ethernet = <&sgmii1>;
120+ phy-mode = "sgmii";
121+ fixed-link {
122+ speed = <1000>;
123+ full-duplex;
124+ };
125+ };
126+
127+ port@1 {
128+ reg = <1>;
129+ label = "lan8";
130+ phy-handle = <&phy_port6>;
131+ };
132+
133+ port@2 {
134+ reg = <2>;
135+ label = "lan9";
136+ phy-handle = <&phy_port7>;
137+ };
138+
139+ port@3 {
140+ reg = <3>;
141+ label = "lan10";
142+ phy-handle = <&phy_port8>;
143+ };
144+
145+ port@4 {
146+ reg = <4>;
147+ label = "lan11";
148+ phy-handle = <&phy_port9>;
149+ };
150+
151+ port@5 {
152+ reg = <5>;
153+ label = "lan12";
154+ phy-handle = <&phy_port10>;
155+ };
156+ };
157+ };
158+ };
159+
160+ mdio-mii@2000 {
161+ reg = <0x2000>;
162+ #address-cells = <1>;
163+ #size-cells = <0>;
164+
165+ phy_port1: phy@0 {
166+ reg = <0>;
167+ };
168+
169+ phy_port2: phy@1 {
170+ reg = <1>;
171+ };
172+
173+ phy_port3: phy@2 {
174+ reg = <2>;
175+ };
176+
177+ phy_port4: phy@3 {
178+ reg = <3>;
179+ };
180+
181+ phy_port5: phy@4 {
182+ reg = <4>;
183+ };
184+
185+ switch@10 {
186+ compatible = "qca,qca8337";
187+ reg = <0x10>;
188+ dsa,member = <2 0>;
189+
190+ ports {
191+ #address-cells = <1>;
192+ #size-cells = <0>;
193+ port@0 {
194+ reg = <0>;
195+ ethernet = <&sgmii0>;
196+ phy-mode = "sgmii";
197+ fixed-link {
198+ speed = <1000>;
199+ full-duplex;
200+ };
201+ };
202+
203+ port@1 {
204+ reg = <1>;
205+ label = "lan3";
206+ phy-handle = <&phy_port1>;
207+ };
208+
209+ port@2 {
210+ reg = <2>;
211+ label = "lan4";
212+ phy-handle = <&phy_port2>;
213+ };
214+
215+ port@3 {
216+ reg = <3>;
217+ label = "lan5";
218+ phy-handle = <&phy_port3>;
219+ };
220+
221+ port@4 {
222+ reg = <4>;
223+ label = "lan6";
224+ phy-handle = <&phy_port4>;
225+ };
226+
227+ port@5 {
228+ reg = <5>;
229+ label = "lan7";
230+ phy-handle = <&phy_port5>;
231+ };
232+ };
233+ };
234+ };
235+ };
236+};
237+
238+&srab {
239+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
240+ status = "okay";
241+ dsa,member = <0 0>;
242+
243+ ports {
244+ port@0 {
245+ label = "wan1";
246+ reg = <0>;
247+ };
248+
249+ port@1 {
250+ label = "wan2";
251+ reg = <1>;
252+ };
253+
254+ sgmii0: port@4 {
255+ label = "sw0";
256+ reg = <4>;
257+ fixed-link {
258+ speed = <1000>;
259+ full-duplex;
260+ };
261+ };
262+
263+ sgmii1: port@5 {
264+ label = "sw1";
265+ reg = <5>;
266+ fixed-link {
267+ speed = <1000>;
268+ full-duplex;
269+ };
270+ };
271+
272+ port@8 {
273+ ethernet = <&amac2>;
274+ reg = <8>;
275+ fixed-link {
276+ speed = <1000>;
277+ full-duplex;
278+ };
279+ };
280+ };
281+};
arch/arm/boot/dts/bcm958625-meraki-kingpin.dtsi+163−0
@@ -0,0 +1,163 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX64 series (Kingpin).
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+#include "bcm958625-meraki-mx6x-common.dtsi"
9+
10+/ {
11+
12+ keys {
13+ compatible = "gpio-keys-polled";
14+ autorepeat;
15+ poll-interval = <20>;
16+
17+ reset {
18+ label = "reset";
19+ linux,code = <KEY_RESTART>;
20+ gpios = <&gpioa 6 GPIO_ACTIVE_LOW>;
21+ };
22+ };
23+
24+ leds {
25+ compatible = "gpio-leds";
26+
27+ led-0 {
28+ /* green:lan1-left */
29+ function = LED_FUNCTION_ACTIVITY;
30+ function-enumerator = <0>;
31+ color = <LED_COLOR_ID_GREEN>;
32+ gpios = <&gpioa 19 GPIO_ACTIVE_LOW>;
33+ };
34+
35+ led-1 {
36+ /* green:lan1-right */
37+ function = LED_FUNCTION_ACTIVITY;
38+ function-enumerator = <1>;
39+ color = <LED_COLOR_ID_GREEN>;
40+ gpios = <&gpioa 18 GPIO_ACTIVE_LOW>;
41+ };
42+
43+ led-2 {
44+ /* green:lan2-left */
45+ function = LED_FUNCTION_ACTIVITY;
46+ function-enumerator = <2>;
47+ color = <LED_COLOR_ID_GREEN>;
48+ gpios = <&gpioa 24 GPIO_ACTIVE_LOW>;
49+ };
50+
51+ led-3 {
52+ /* green:lan2-right */
53+ function = LED_FUNCTION_ACTIVITY;
54+ function-enumerator = <3>;
55+ color = <LED_COLOR_ID_GREEN>;
56+ gpios = <&gpioa 20 GPIO_ACTIVE_LOW>;
57+ };
58+
59+ led-4 {
60+ /* green:lan3-left */
61+ function = LED_FUNCTION_ACTIVITY;
62+ function-enumerator = <4>;
63+ color = <LED_COLOR_ID_GREEN>;
64+ gpios = <&gpioa 26 GPIO_ACTIVE_LOW>;
65+ };
66+
67+ led-5 {
68+ /* green:lan3-right */
69+ function = LED_FUNCTION_ACTIVITY;
70+ function-enumerator = <5>;
71+ color = <LED_COLOR_ID_GREEN>;
72+ gpios = <&gpioa 25 GPIO_ACTIVE_LOW>;
73+ };
74+
75+ led-6 {
76+ /* green:lan4-left */
77+ function = LED_FUNCTION_ACTIVITY;
78+ function-enumerator = <6>;
79+ color = <LED_COLOR_ID_GREEN>;
80+ gpios = <&gpioa 28 GPIO_ACTIVE_LOW>;
81+ };
82+
83+ led-7 {
84+ /* green:lan4-right */
85+ function = LED_FUNCTION_ACTIVITY;
86+ function-enumerator = <7>;
87+ color = <LED_COLOR_ID_GREEN>;
88+ gpios = <&gpioa 27 GPIO_ACTIVE_LOW>;
89+ };
90+
91+ led-8 {
92+ /* green:wan-left */
93+ function = LED_FUNCTION_ACTIVITY;
94+ function-enumerator = <8>;
95+ color = <LED_COLOR_ID_GREEN>;
96+ gpios = <&gpioa 30 GPIO_ACTIVE_LOW>;
97+ };
98+
99+ led-9 {
100+ /* green:wan-right */
101+ function = LED_FUNCTION_ACTIVITY;
102+ function-enumerator = <9>;
103+ color = <LED_COLOR_ID_GREEN>;
104+ gpios = <&gpioa 29 GPIO_ACTIVE_LOW>;
105+ };
106+
107+ led-a {
108+ /* amber:power */
109+ function = LED_FUNCTION_POWER;
110+ color = <LED_COLOR_ID_AMBER>;
111+ gpios = <&gpioa 0 GPIO_ACTIVE_LOW>;
112+ default-state = "on";
113+ };
114+
115+ led-b {
116+ /* white:status */
117+ function = LED_FUNCTION_STATUS;
118+ color = <LED_COLOR_ID_WHITE>;
119+ gpios = <&gpioa 31 GPIO_ACTIVE_HIGH>;
120+ };
121+ };
122+};
123+
124+&srab {
125+ compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
126+ status = "okay";
127+
128+ ports {
129+ port@0 {
130+ label = "lan1";
131+ reg = <0>;
132+ };
133+
134+ port@1 {
135+ label = "lan2";
136+ reg = <1>;
137+ };
138+
139+ port@2 {
140+ label = "lan3";
141+ reg = <2>;
142+ };
143+
144+ port@3 {
145+ label = "lan4";
146+ reg = <3>;
147+ };
148+
149+ port@4 {
150+ label = "wan";
151+ reg = <4>;
152+ };
153+
154+ port@8 {
155+ ethernet = <&amac2>;
156+ reg = <8>;
157+ fixed-link {
158+ speed = <1000>;
159+ full-duplex;
160+ };
161+ };
162+ };
163+};
arch/arm/boot/dts/bcm958625-meraki-mx64-a0.dts+25−0
@@ -0,0 +1,25 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX64 with A0 SoC.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-kingpin.dtsi"
11+#include "bcm-nsp-ax.dtsi"
12+
13+/ {
14+ model = "Cisco Meraki MX64(A0)";
15+ compatible = "meraki,mx64-a0", "brcm,bcm58625", "brcm,nsp";
16+
17+ chosen {
18+ stdout-path = "serial0:115200n8";
19+ };
20+
21+ memory@60000000 {
22+ device_type = "memory";
23+ reg = <0x60000000 0x80000000>;
24+ };
25+};
arch/arm/boot/dts/bcm958625-meraki-mx64.dts+24−0
@@ -0,0 +1,24 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX64 with B0+ SoC.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-kingpin.dtsi"
11+
12+/ {
13+ model = "Cisco Meraki MX64";
14+ compatible = "meraki,mx64", "brcm,bcm58625", "brcm,nsp";
15+
16+ chosen {
17+ stdout-path = "serial0:115200n8";
18+ };
19+
20+ memory@60000000 {
21+ device_type = "memory";
22+ reg = <0x60000000 0x80000000>;
23+ };
24+};
arch/arm/boot/dts/bcm958625-meraki-mx64w-a0.dts+33−0
@@ -0,0 +1,33 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX64W with A0 SoC.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-kingpin.dtsi"
11+#include "bcm-nsp-ax.dtsi"
12+
13+/ {
14+ model = "Cisco Meraki MX64W(A0)";
15+ compatible = "meraki,mx64w-a0", "brcm,bcm58625", "brcm,nsp";
16+
17+ chosen {
18+ stdout-path = "serial0:115200n8";
19+ };
20+
21+ memory@60000000 {
22+ device_type = "memory";
23+ reg = <0x60000000 0x80000000>;
24+ };
25+};
26+
27+&pcie0 {
28+ status = "okay";
29+};
30+
31+&pcie1 {
32+ status = "okay";
33+};
arch/arm/boot/dts/bcm958625-meraki-mx64w.dts+32−0
@@ -0,0 +1,32 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX64W with B0+ SoC.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-kingpin.dtsi"
11+
12+/ {
13+ model = "Cisco Meraki MX64W";
14+ compatible = "meraki,mx64w", "brcm,bcm58625", "brcm,nsp";
15+
16+ chosen {
17+ stdout-path = "serial0:115200n8";
18+ };
19+
20+ memory@60000000 {
21+ device_type = "memory";
22+ reg = <0x60000000 0x80000000>;
23+ };
24+};
25+
26+&pcie0 {
27+ status = "okay";
28+};
29+
30+&pcie1 {
31+ status = "okay";
32+};
arch/arm/boot/dts/bcm958625-meraki-mx65.dts+24−0
@@ -0,0 +1,24 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX65.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-alamo.dtsi"
11+
12+/ {
13+ model = "Cisco Meraki MX65";
14+ compatible = "meraki,mx65", "brcm,bcm58625", "brcm,nsp";
15+
16+ chosen {
17+ stdout-path = "serial0:115200n8";
18+ };
19+
20+ memory@60000000 {
21+ device_type = "memory";
22+ reg = <0x60000000 0x80000000>;
23+ };
24+};
arch/arm/boot/dts/bcm958625-meraki-mx65w.dts+32−0
@@ -0,0 +1,32 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Device Tree Bindings for Cisco Meraki MX65W.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+/dts-v1/;
9+
10+#include "bcm958625-meraki-alamo.dtsi"
11+
12+/ {
13+ model = "Cisco Meraki MX65W";
14+ compatible = "meraki,mx65w", "brcm,bcm58625", "brcm,nsp";
15+
16+ chosen {
17+ stdout-path = "serial0:115200n8";
18+ };
19+
20+ memory@60000000 {
21+ device_type = "memory";
22+ reg = <0x60000000 0x80000000>;
23+ };
24+};
25+
26+&pcie0 {
27+ status = "okay";
28+};
29+
30+&pcie1 {
31+ status = "okay";
32+};
arch/arm/boot/dts/bcm958625-meraki-mx6x-common.dtsi+129−0
@@ -0,0 +1,129 @@
1+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2+/*
3+ * Common Bindings for Cisco Meraki MX64 (Kingpin) and MX65 (Alamo) devices.
4+ *
5+ * Copyright (C) 2020-2021 Matthew Hagan <mnhagan88@gmail.com>
6+ */
7+
8+#include "bcm-nsp.dtsi"
9+#include <dt-bindings/gpio/gpio.h>
10+#include <dt-bindings/input/input.h>
11+#include <dt-bindings/leds/common.h>
12+
13+/ {
14+ pwm-leds {
15+ compatible = "pwm-leds";
16+
17+ led-1 {
18+ function = LED_FUNCTION_INDICATOR;
19+ color = <LED_COLOR_ID_RED>;
20+ pwms = <&pwm 1 50000>;
21+ max-brightness = <255>;
22+ };
23+
24+ led-2 {
25+ function = LED_FUNCTION_INDICATOR;
26+ color = <LED_COLOR_ID_GREEN>;
27+ pwms = <&pwm 2 50000>;
28+ max-brightness = <255>;
29+ };
30+
31+ led-3 {
32+ function = LED_FUNCTION_INDICATOR;
33+ color = <LED_COLOR_ID_BLUE>;
34+ pwms = <&pwm 3 50000>;
35+ max-brightness = <255>;
36+ };
37+ };
38+};
39+
40+&amac2 {
41+ status = "okay";
42+};
43+
44+&ehci0 {
45+ status = "okay";
46+};
47+
48+&i2c0 {
49+ status = "okay";
50+
51+ eeprom@50 {
52+ compatible = "atmel,24c64";
53+ reg = <0x50>;
54+ pagesize = <32>;
55+ read-only;
56+ };
57+};
58+
59+&nand_controller {
60+ nand@0 {
61+ compatible = "brcm,nandcs";
62+ reg = <0>;
63+ nand-on-flash-bbt;
64+
65+ #address-cells = <1>;
66+ #size-cells = <1>;
67+
68+ nand-ecc-strength = <24>;
69+ nand-ecc-step-size = <1024>;
70+
71+ brcm,nand-oob-sector-size = <27>;
72+
73+ partition@0 {
74+ label = "u-boot";
75+ reg = <0x0 0x80000>;
76+ read-only;
77+ };
78+
79+ partition@80000 {
80+ label = "shmoo";
81+ reg = <0x80000 0x80000>;
82+ read-only;
83+ };
84+
85+ partition@100000 {
86+ label = "bootkernel1";
87+ reg = <0x100000 0x300000>;
88+ };
89+
90+ partition@400000 {
91+ label = "nvram";
92+ reg = <0x400000 0x100000>;
93+ };
94+
95+ partition@500000 {
96+ label = "bootkernel2";
97+ reg = <0x500000 0x300000>;
98+ };
99+
100+ partition@800000 {
101+ label = "ubi";
102+ reg = <0x800000 0x3f700000>;
103+ };
104+ };
105+};
106+
107+&ohci0 {
108+ status = "okay";
109+};
110+
111+&pinctrl {
112+ pinctrl-names = "default";
113+ pinctrl-0 = <&pwm_leds>;
114+
115+ pwm_leds: pwm_leds {
116+ function = "pwm";
117+ groups = "pwm1_grp", "pwm2_grp", "pwm3_grp";
118+ };
119+};
120+
121+&pwm {
122+ status = "okay";
123+ #pwm-cells = <2>;
124+};
125+
126+&uart0 {
127+ clock-frequency = <62500000>;
128+ status = "okay";
129+};
arch/arm/boot/dts/bcm958625hr.dts+2−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM958625HR)";
40− compatible = "brcm,bcm58625", "brcm,nsp";
40+ compatible = "brcm,bcm958625hr", "brcm,bcm58625", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -149,6 +149,7 @@ · 105 unmodified lines
149149 };
150150
151151 &qspi {
152+ status = "okay";
152153 bspi-sel = <0>;
153154 flash: m25p80@0 {
154155 #address-cells = <1>;
arch/arm/boot/dts/bcm958625k.dts+2−1
@@ -36,7 +36,7 @@ · 35 unmodified lines
3636
3737 / {
3838 model = "NorthStar Plus SVK (BCM958625K)";
39− compatible = "brcm,bcm58625", "brcm,nsp";
39+ compatible = "brcm,bcm958625k", "brcm,bcm58625", "brcm,nsp";
4040
4141 chosen {
4242 stdout-path = "serial0:115200n8";
@@ -153,6 +153,7 @@ · 110 unmodified lines
153153 };
154154
155155 &qspi {
156+ status = "okay";
156157 bspi-sel = <0>;
157158 flash: m25p80@0 {
158159 #address-cells = <1>;
arch/arm/boot/dts/bcm988312hr.dts+6−1
@@ -37,7 +37,7 @@ · 36 unmodified lines
3737
3838 / {
3939 model = "NorthStar Plus SVK (BCM988312HR)";
40− compatible = "brcm,bcm88312", "brcm,nsp";
40+ compatible = "brcm,bcm988312hr", "brcm,bcm88312", "brcm,nsp";
4141
4242 chosen {
4343 stdout-path = "serial0:115200n8";
@@ -58,6 +58,10 @@ · 14 unmodified lines
5858
5959 /* USB 3 support needed to be complete */
6060
61+&dma {
62+ status = "okay";
63+};
64+
6165 &amac0 {
6266 status = "okay";
6367 };
@@ -134,6 +138,7 @@ · 70 unmodified lines
134138 };
135139
136140 &qspi {
141+ status = "okay";
137142 bspi-sel = <0>;
138143 flash: m25p80@0 {
139144 #address-cells = <1>;
arch/arm/boot/dts/dra7.dtsi+19−0
@@ -965,6 +965,25 @@ · 964 unmodified lines
965965 };
966966 };
967967
968+ target-module@59000000 {
969+ compatible = "ti,sysc-omap4", "ti,sysc";
970+ reg = <0x59000020 0x4>;
971+ reg-names = "rev";
972+ clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
973+ clock-names = "fck";
974+ #address-cells = <1>;
975+ #size-cells = <1>;
976+ ranges = <0x0 0x59000000 0x1000>;
977+
978+ bb2d: gpu@0 {
979+ compatible = "vivante,gc";
980+ reg = <0x0 0x700>;
981+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
982+ clocks = <&dss_clkctrl DRA7_BB2D_CLKCTRL 0>;
983+ clock-names = "core";
984+ };
985+ };
986+
968987 aes1_target: target-module@4b500000 {
969988 compatible = "ti,sysc-omap2", "ti,sysc";
970989 reg = <0x4b500080 0x4>,
arch/arm/boot/dts/e60k02.dtsi+1−1
@@ -41,7 +41,7 @@ · 40 unmodified lines
4141 leds: leds {
4242 compatible = "gpio-leds";
4343
44− on {
44+ led {
4545 label = "e60k02:white:on";
4646 gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
4747 linux,default-trigger = "timer";
arch/arm/boot/dts/e70k02.dtsi+320−0
@@ -0,0 +1,320 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/*
3+ * Copyright 2021 Andreas Kemnade
4+ * based on works
5+ * Copyright 2016 Freescale Semiconductor, Inc.
6+ * and
7+ * Copyright (C) 2014 Ricoh Electronic Devices Co., Ltd
8+ *
9+ * Netronix E70K02 board common.
10+ * This board is equipped with different SoCs and
11+ * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and
12+ * the Tolino Shine 3 (with i.MX6SL)
13+ */
14+#include <dt-bindings/input/input.h>
15+
16+/ {
17+ aliases {
18+ mmc0 = &usdhc1;
19+ mmc1 = &usdhc3;
20+ };
21+
22+ chosen {
23+ stdout-path = &uart1;
24+ };
25+
26+ gpio_keys: gpio-keys {
27+ compatible = "gpio-keys";
28+
29+ power {
30+ label = "Power";
31+ gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
32+ linux,code = <KEY_POWER>;
33+ wakeup-source;
34+ };
35+
36+ cover {
37+ label = "Cover";
38+ gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
39+ linux,code = <SW_LID>;
40+ linux,input-type = <EV_SW>;
41+ wakeup-source;
42+ };
43+
44+ pageup {
45+ label = "PageUp";
46+ gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
47+ linux,code = <KEY_PAGEUP>;
48+ };
49+
50+ pagedown {
51+ label = "PageDown";
52+ gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
53+ linux,code = <KEY_PAGEDOWN>;
54+ };
55+ };
56+
57+ leds: leds {
58+ compatible = "gpio-leds";
59+
60+ led {
61+ label = "e70k02:white:on";
62+ gpios = <&gpio4 17 GPIO_ACTIVE_LOW>;
63+ linux,default-trigger = "timer";
64+ };
65+ };
66+
67+ memory@80000000 {
68+ device_type = "memory";
69+ reg = <0x80000000 0x20000000>;
70+ };
71+
72+ reg_wifi: regulator-wifi {
73+ compatible = "regulator-fixed";
74+ regulator-name = "SD3_SPWR";
75+ regulator-min-microvolt = <3000000>;
76+ regulator-max-microvolt = <3000000>;
77+ gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
78+ enable-active-high;
79+ };
80+
81+ wifi_pwrseq: wifi-pwrseq {
82+ compatible = "mmc-pwrseq-simple";
83+ post-power-on-delay-ms = <20>;
84+ reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
85+ };
86+};
87+
88+&i2c1 {
89+ clock-frequency = <100000>;
90+ status = "okay";
91+
92+ lm3630a: backlight@36 {
93+ reg = <0x36>;
94+ compatible = "ti,lm3630a";
95+ enable-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
96+
97+ #address-cells = <1>;
98+ #size-cells = <0>;
99+
100+ led@0 {
101+ reg = <0>;
102+ led-sources = <0>;
103+ label = "backlight_warm";
104+ default-brightness = <0>;
105+ max-brightness = <255>;
106+ };
107+
108+ led@1 {
109+ reg = <1>;
110+ led-sources = <1>;
111+ label = "backlight_cold";
112+ default-brightness = <0>;
113+ max-brightness = <255>;
114+ };
115+ };
116+
117+ /* TODO: KX122 acceleration sensor a 0x1e */
118+
119+};
120+
121+&i2c2 {
122+ clock-frequency = <100000>;
123+ status = "okay";
124+
125+ /* TODO: CYTTSP5 touch controller at 0x24 */
126+
127+ /* TODO: SY7636 PMIC for E Ink at 0x62 */
128+
129+};
130+
131+&i2c3 {
132+ clock-frequency = <100000>;
133+ status = "okay";
134+
135+ ricoh619: pmic@32 {
136+ compatible = "ricoh,rc5t619";
137+ reg = <0x32>;
138+ interrupt-parent = <&gpio4>;
139+ interrupts = <19 IRQ_TYPE_EDGE_FALLING>;
140+ system-power-controller;
141+
142+ regulators {
143+ dcdc1_reg: DCDC1 {
144+ regulator-name = "DCDC1";
145+ regulator-min-microvolt = <300000>;
146+ regulator-max-microvolt = <1875000>;
147+ regulator-always-on;
148+ regulator-boot-on;
149+
150+ regulator-state-mem {
151+ regulator-on-in-suspend;
152+ regulator-suspend-max-microvolt = <900000>;
153+ regulator-suspend-min-microvolt = <900000>;
154+ };
155+ };
156+
157+ /* Core3_3V3 */
158+ dcdc2_reg: DCDC2 {
159+ regulator-name = "DCDC2";
160+ regulator-always-on;
161+ regulator-boot-on;
162+
163+ regulator-state-mem {
164+ regulator-on-in-suspend;
165+ regulator-suspend-max-microvolt = <3300000>;
166+ regulator-suspend-min-microvolt = <3300000>;
167+ };
168+ };
169+
170+ dcdc3_reg: DCDC3 {
171+ regulator-name = "DCDC3";
172+ regulator-min-microvolt = <300000>;
173+ regulator-max-microvolt = <1875000>;
174+ regulator-always-on;
175+ regulator-boot-on;
176+
177+ regulator-state-mem {
178+ regulator-on-in-suspend;
179+ regulator-suspend-max-microvolt = <1140000>;
180+ regulator-suspend-min-microvolt = <1140000>;
181+ };
182+ };
183+
184+ /* Core4_1V2 */
185+ dcdc4_reg: DCDC4 {
186+ regulator-name = "DCDC4";
187+ regulator-min-microvolt = <1200000>;
188+ regulator-max-microvolt = <1200000>;
189+ regulator-always-on;
190+ regulator-boot-on;
191+
192+ regulator-state-mem {
193+ regulator-on-in-suspend;
194+ regulator-suspend-max-microvolt = <1140000>;
195+ regulator-suspend-min-microvolt = <1140000>;
196+ };
197+ };
198+
199+ /* Core4_1V8 */
200+ dcdc5_reg: DCDC5 {
201+ regulator-name = "DCDC5";
202+ regulator-min-microvolt = <1800000>;
203+ regulator-max-microvolt = <1800000>;
204+ regulator-always-on;
205+ regulator-boot-on;
206+
207+ regulator-state-mem {
208+ regulator-on-in-suspend;
209+ regulator-suspend-max-microvolt = <1700000>;
210+ regulator-suspend-min-microvolt = <1700000>;
211+ };
212+ };
213+
214+ ldo1_reg: LDO1 {
215+ regulator-name = "LDO1";
216+ regulator-boot-on;
217+ };
218+
219+ /* Core1_3V3 */
220+ ldo2_reg: LDO2 {
221+ regulator-name = "LDO2";
222+ regulator-always-on;
223+ regulator-boot-on;
224+
225+ regulator-state-mem {
226+ regulator-on-in-suspend;
227+ regulator-suspend-max-microvolt = <3000000>;
228+ regulator-suspend-min-microvolt = <3000000>;
229+ };
230+ };
231+
232+ /* Core5_1V2 */
233+ ldo3_reg: LDO3 {
234+ regulator-name = "LDO3";
235+ regulator-always-on;
236+ regulator-boot-on;
237+ };
238+
239+ ldo4_reg: LDO4 {
240+ regulator-name = "LDO4";
241+ regulator-boot-on;
242+ };
243+
244+ /* SPD_3V3 */
245+ ldo5_reg: LDO5 {
246+ regulator-name = "LDO5";
247+ regulator-always-on;
248+ regulator-boot-on;
249+ };
250+
251+ /* DDR_0V6 */
252+ ldo6_reg: LDO6 {
253+ regulator-name = "LDO6";
254+ regulator-always-on;
255+ regulator-boot-on;
256+ };
257+
258+ /* VDD_PWM */
259+ ldo7_reg: LDO7 {
260+ regulator-name = "LDO7";
261+ regulator-boot-on;
262+ };
263+
264+ /* ldo_1v8 */
265+ ldo8_reg: LDO8 {
266+ regulator-name = "LDO8";
267+ regulator-min-microvolt = <1800000>;
268+ regulator-max-microvolt = <1800000>;
269+ regulator-boot-on;
270+ };
271+
272+ ldo9_reg: LDO9 {
273+ regulator-name = "LDO9";
274+ regulator-boot-on;
275+ };
276+
277+ ldo10_reg: LDO10 {
278+ regulator-name = "LDO10";
279+ regulator-boot-on;
280+ };
281+
282+ ldortc1_reg: LDORTC1 {
283+ regulator-name = "LDORTC1";
284+ regulator-boot-on;
285+ };
286+ };
287+ };
288+};
289+
290+&snvs_rtc {
291+ /* we are using the rtc in the pmic, not disabled in imx6sll.dtsi */
292+ status = "disabled";
293+};
294+
295+&uart1 {
296+ status = "okay";
297+};
298+
299+&usdhc1 {
300+ non-removable;
301+ no-1-8-v;
302+ status = "okay";
303+};
304+
305+&usdhc3 {
306+ vmmc-supply = <&reg_wifi>;
307+ mmc-pwrseq = <&wifi_pwrseq>;
308+ cap-power-off-card;
309+ non-removable;
310+ status = "okay";
311+};
312+
313+&usbotg1 {
314+ pinctrl-names = "default";
315+ disable-over-current;
316+ srp-disable;
317+ hnp-disable;
318+ adp-disable;
319+ status = "okay";
320+};
arch/arm/boot/dts/emev2-kzm9d.dts+1−1
@@ -80,7 +80,7 @@ · 79 unmodified lines
8080 };
8181
8282 ethernet@20000000 {
83− compatible = "smsc,lan9220", "smsc,lan9115";
83+ compatible = "smsc,lan9221", "smsc,lan9115";
8484 reg = <0x20000000 0x10000>;
8585 phy-mode = "mii";
8686 interrupt-parent = <&gpio0>;
arch/arm/boot/dts/exynos3250-rinato.dts+1−0
@@ -19,6 +19,7 @@ · 18 unmodified lines
1919 / {
2020 model = "Samsung Rinato board";
2121 compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
22+ chassis-type = "watch";
2223
2324 aliases {
2425 i2c7 = &i2c_max77836;
arch/arm/boot/dts/exynos4210-i9100.dts+1−0
@@ -18,6 +18,7 @@ · 17 unmodified lines
1818 / {
1919 model = "Samsung Galaxy S2 (GT-I9100)";
2020 compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
21+ chassis-type = "handset";
2122
2223 memory@40000000 {
2324 device_type = "memory";
arch/arm/boot/dts/exynos4210-origen.dts+12−12
@@ -206,74 +206,74 @@ · 205 unmodified lines
206206 ldo4_reg: LDO4 {
207207 regulator-name = "VDD_RTC_1.8V";
208208 regulator-min-microvolt = <1800000>;
209− regulator-max-microvolt = <1800000>;
209+ regulator-max-microvolt = <1800000>;
210210 regulator-always-on;
211211 };
212212
213213 ldo6_reg: LDO6 {
214214 regulator-name = "VMIPI_1.8V";
215215 regulator-min-microvolt = <1800000>;
216− regulator-max-microvolt = <1800000>;
216+ regulator-max-microvolt = <1800000>;
217217 regulator-always-on;
218218 };
219219
220220 ldo7_reg: LDO7 {
221221 regulator-name = "VDD_AUD_1.8V";
222222 regulator-min-microvolt = <1800000>;
223− regulator-max-microvolt = <1800000>;
223+ regulator-max-microvolt = <1800000>;
224224 };
225225
226226 ldo8_reg: LDO8 {
227227 regulator-name = "VADC_3.3V";
228228 regulator-min-microvolt = <3300000>;
229− regulator-max-microvolt = <3300000>;
229+ regulator-max-microvolt = <3300000>;
230230 };
231231
232232 ldo9_reg: LDO9 {
233233 regulator-name = "DVDD_SWB_2.8V";
234234 regulator-min-microvolt = <2800000>;
235− regulator-max-microvolt = <2800000>;
235+ regulator-max-microvolt = <2800000>;
236236 regulator-always-on;
237237 };
238238
239239 ldo10_reg: LDO10 {
240240 regulator-name = "VDD_PLL_1.1V";
241241 regulator-min-microvolt = <1100000>;
242− regulator-max-microvolt = <1100000>;
242+ regulator-max-microvolt = <1100000>;
243243 regulator-always-on;
244244 };
245245
246246 ldo11_reg: LDO11 {
247247 regulator-name = "VDD_AUD_3V";
248248 regulator-min-microvolt = <3000000>;
249− regulator-max-microvolt = <3000000>;
249+ regulator-max-microvolt = <3000000>;
250250 };
251251
252252 ldo14_reg: LDO14 {
253253 regulator-name = "AVDD18_SWB_1.8V";
254254 regulator-min-microvolt = <1800000>;
255− regulator-max-microvolt = <1800000>;
255+ regulator-max-microvolt = <1800000>;
256256 regulator-always-on;
257257 };
258258
259259 ldo17_reg: LDO17 {
260260 regulator-name = "VDD_SWB_3.3V";
261261 regulator-min-microvolt = <3300000>;
262− regulator-max-microvolt = <3300000>;
262+ regulator-max-microvolt = <3300000>;
263263 regulator-always-on;
264264 };
265265
266266 ldo21_reg: LDO21 {
267267 regulator-name = "VDD_MIF_1.2V";
268268 regulator-min-microvolt = <1200000>;
269− regulator-max-microvolt = <1200000>;
269+ regulator-max-microvolt = <1200000>;
270270 regulator-always-on;
271271 };
272272
273273 buck1_reg: BUCK1 {
274274 regulator-name = "VDD_ARM_1.2V";
275275 regulator-min-microvolt = <950000>;
276− regulator-max-microvolt = <1350000>;
276+ regulator-max-microvolt = <1350000>;
277277 regulator-always-on;
278278 regulator-boot-on;
279279 };
@@ -281,7 +281,7 @@ · 1 unmodified line
281281 buck2_reg: BUCK2 {
282282 regulator-name = "VDD_INT_1.1V";
283283 regulator-min-microvolt = <900000>;
284− regulator-max-microvolt = <1100000>;
284+ regulator-max-microvolt = <1100000>;
285285 regulator-always-on;
286286 regulator-boot-on;
287287 };
arch/arm/boot/dts/exynos4210-trats.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
1616 / {
1717 model = "Samsung Trats based on Exynos4210";
1818 compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
19+ chassis-type = "handset";
1920
2021 memory@40000000 {
2122 device_type = "memory";
arch/arm/boot/dts/exynos4210-universal_c210.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
1616 / {
1717 model = "Samsung Universal C210 based on Exynos4210 rev0";
1818 compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
19+ chassis-type = "handset";
1920
2021 memory@40000000 {
2122 device_type = "memory";
arch/arm/boot/dts/exynos4412-i9300.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
1212 / {
1313 model = "Samsung Galaxy S3 (GT-I9300) based on Exynos4412";
1414 compatible = "samsung,i9300", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
15+ chassis-type = "handset";
1516
1617 /* bootargs are passed in by bootloader */
1718
arch/arm/boot/dts/exynos4412-i9305.dts+1−0
@@ -5,6 +5,7 @@ · 4 unmodified lines
55 / {
66 model = "Samsung Galaxy S3 (GT-I9305) based on Exynos4412";
77 compatible = "samsung,i9305", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
8+ chassis-type = "handset";
89
910 /* bootargs are passed in by bootloader */
1011
arch/arm/boot/dts/exynos4412-n710x.dts+1−0
@@ -5,6 +5,7 @@ · 4 unmodified lines
55 / {
66 compatible = "samsung,n710x", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
77 model = "Samsung Galaxy Note 2 (GT-N7100, GT-N7105) based on Exynos4412";
8+ chassis-type = "handset";
89
910 memory@40000000 {
1011 device_type = "memory";
arch/arm/boot/dts/exynos4412-origen.dts+7−7
@@ -382,7 +382,7 @@ · 381 unmodified lines
382382 buck1_reg: BUCK1 {
383383 regulator-name = "VDD_MIF";
384384 regulator-min-microvolt = <950000>;
385− regulator-max-microvolt = <1100000>;
385+ regulator-max-microvolt = <1100000>;
386386 regulator-always-on;
387387 regulator-boot-on;
388388 op_mode = <1>; /* Normal Mode */
@@ -391,7 +391,7 @@ · 2 unmodified lines
391391 buck2_reg: BUCK2 {
392392 regulator-name = "VDD_ARM";
393393 regulator-min-microvolt = <900000>;
394− regulator-max-microvolt = <1350000>;
394+ regulator-max-microvolt = <1350000>;
395395 regulator-always-on;
396396 regulator-boot-on;
397397 op_mode = <1>; /* Normal Mode */
@@ -400,7 +400,7 @@ · 2 unmodified lines
400400 buck3_reg: BUCK3 {
401401 regulator-name = "VDD_INT";
402402 regulator-min-microvolt = <900000>;
403− regulator-max-microvolt = <1200000>;
403+ regulator-max-microvolt = <1200000>;
404404 regulator-always-on;
405405 regulator-boot-on;
406406 op_mode = <1>; /* Normal Mode */
@@ -409,7 +409,7 @@ · 2 unmodified lines
409409 buck4_reg: BUCK4 {
410410 regulator-name = "VDD_G3D";
411411 regulator-min-microvolt = <750000>;
412− regulator-max-microvolt = <1500000>;
412+ regulator-max-microvolt = <1500000>;
413413 regulator-always-on;
414414 regulator-boot-on;
415415 op_mode = <1>; /* Normal Mode */
@@ -418,7 +418,7 @@ · 2 unmodified lines
418418 buck5_reg: BUCK5 {
419419 regulator-name = "VDD_M12";
420420 regulator-min-microvolt = <750000>;
421− regulator-max-microvolt = <1500000>;
421+ regulator-max-microvolt = <1500000>;
422422 regulator-always-on;
423423 regulator-boot-on;
424424 op_mode = <1>; /* Normal Mode */
@@ -427,7 +427,7 @@ · 2 unmodified lines
427427 buck6_reg: BUCK6 {
428428 regulator-name = "VDD12_5M";
429429 regulator-min-microvolt = <750000>;
430− regulator-max-microvolt = <1500000>;
430+ regulator-max-microvolt = <1500000>;
431431 regulator-always-on;
432432 regulator-boot-on;
433433 op_mode = <1>; /* Normal Mode */
@@ -436,7 +436,7 @@ · 2 unmodified lines
436436 buck9_reg: BUCK9 {
437437 regulator-name = "VDDF28_EMMC";
438438 regulator-min-microvolt = <750000>;
439− regulator-max-microvolt = <3000000>;
439+ regulator-max-microvolt = <3000000>;
440440 regulator-always-on;
441441 regulator-boot-on;
442442 op_mode = <1>; /* Normal Mode */
arch/arm/boot/dts/exynos4412-p4note-n8010.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
1212 / {
1313 model = "Samsung Galaxy Note 10.1 (GT-N8010/N8013) based on Exynos4412";
1414 compatible = "samsung,n8010", "samsung,p4note", "samsung,exynos4412", "samsung,exynos4";
15+ chassis-type = "tablet";
1516
1617 /* this is the base variant without any kind of modem */
1718 };
arch/arm/boot/dts/exynos4412-trats2.dts+1−0
@@ -15,6 +15,7 @@ · 14 unmodified lines
1515 / {
1616 model = "Samsung Trats 2 based on Exynos4412";
1717 compatible = "samsung,trats2", "samsung,midas", "samsung,exynos4412", "samsung,exynos4";
18+ chassis-type = "handset";
1819
1920 memory@40000000 {
2021 device_type = "memory";
arch/arm/boot/dts/exynos5250-arndale.dts+0−3
@@ -240,9 +240,6 @@ · 239 unmodified lines
240240 vinl8-supply = <&buck8_reg>;
241241 vinl9-supply = <&buck8_reg>;
242242
243− s5m8767,pmic-buck2-dvs-voltage = <1300000>;
244− s5m8767,pmic-buck3-dvs-voltage = <1100000>;
245− s5m8767,pmic-buck4-dvs-voltage = <1200000>;
246243 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
247244 <&gpd1 1 GPIO_ACTIVE_HIGH>,
248245 <&gpd1 2 GPIO_ACTIVE_HIGH>;
arch/arm/boot/dts/exynos5250-snow-rev5.dts+1−0
@@ -14,6 +14,7 @@ · 13 unmodified lines
1414 model = "Google Snow Rev 5+";
1515 compatible = "google,snow-rev5", "samsung,exynos5250",
1616 "samsung,exynos5";
17+ chassis-type = "laptop";
1718
1819 sound {
1920 compatible = "google,snow-audio-max98090";
arch/arm/boot/dts/exynos5250-snow.dts+1−0
@@ -12,6 +12,7 @@ · 11 unmodified lines
1212 model = "Google Snow";
1313 compatible = "google,snow-rev4", "google,snow", "samsung,exynos5250",
1414 "samsung,exynos5";
15+ chassis-type = "laptop";
1516
1617 sound {
1718 compatible = "google,snow-audio-max98095";
arch/arm/boot/dts/exynos5250-spring.dts+1−0
@@ -16,6 +16,7 @@ · 15 unmodified lines
1616 / {
1717 model = "Google Spring";
1818 compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
19+ chassis-type = "laptop";
1920
2021 memory@40000000 {
2122 device_type = "memory";
arch/arm/boot/dts/exynos5250.dtsi+0−1
@@ -386,7 +386,6 @@ · 385 unmodified lines
386386
387387 sata: sata@122f0000 {
388388 compatible = "snps,dwc-ahci";
389− samsung,sata-freq = <66>;
390389 reg = <0x122F0000 0x1ff>;
391390 interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
392391 clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
arch/arm/boot/dts/exynos5420-peach-pit.dts+1−0
@@ -26,6 +26,7 @@ · 25 unmodified lines
2626 "google,pit-rev7", "google,pit-rev6",
2727 "google,pit", "google,peach","samsung,exynos5420",
2828 "samsung,exynos5";
29+ chassis-type = "laptop";
2930
3031 aliases {
3132 /* Assign 20 so we don't get confused w/ builtin ones */
arch/arm/boot/dts/exynos5800-peach-pi.dts+1−0
@@ -24,6 +24,7 @@ · 23 unmodified lines
2424 "google,pi-rev11", "google,pi-rev10",
2525 "google,pi", "google,peach", "samsung,exynos5800",
2626 "samsung,exynos5";
27+ chassis-type = "laptop";
2728
2829 aliases {
2930 /* Assign 20 so we don't get confused w/ builtin ones */
arch/arm/boot/dts/gemini-dlink-dir-685.dts+0−18
@@ -439,24 +439,6 @@ · 438 unmodified lines
439439
440440 pci@50000000 {
441441 status = "okay";
442− interrupt-map-mask = <0xf800 0 0 7>;
443− interrupt-map =
444− <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
445− <0x4800 0 0 2 &pci_intc 1>,
446− <0x4800 0 0 3 &pci_intc 2>,
447− <0x4800 0 0 4 &pci_intc 3>,
448− <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
449− <0x5000 0 0 2 &pci_intc 2>,
450− <0x5000 0 0 3 &pci_intc 3>,
451− <0x5000 0 0 4 &pci_intc 0>,
452− <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
453− <0x5800 0 0 2 &pci_intc 3>,
454− <0x5800 0 0 3 &pci_intc 0>,
455− <0x5800 0 0 4 &pci_intc 1>,
456− <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
457− <0x6000 0 0 2 &pci_intc 0>,
458− <0x6000 0 0 3 &pci_intc 1>,
459− <0x6000 0 0 4 &pci_intc 2>;
460442 };
461443
462444 ethernet@60000000 {
arch/arm/boot/dts/gemini-ns2502.dts+148−0
@@ -0,0 +1,148 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/*
3+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
4+ * Device Tree file for Edimax NS 2502
5+ */
6+
7+/dts-v1/;
8+
9+#include "gemini.dtsi"
10+
11+/ {
12+ model = "Edimax NS-2502";
13+ compatible = "edimax,ns-2502", "cortina,gemini";
14+ #address-cells = <1>;
15+ #size-cells = <1>;
16+
17+ memory@0 {
18+ /* 128 MB */
19+ device_type = "memory";
20+ reg = <0x00000000 0x8000000>;
21+ };
22+
23+ aliases {
24+ mdio-gpio0 = &mdio0;
25+ };
26+
27+ chosen {
28+ bootargs = "console=ttyS0,19200n8";
29+ stdout-path = &uart0;
30+ };
31+
32+ mdio0: mdio {
33+ compatible = "virtual,mdio-gpio";
34+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
35+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
36+ #address-cells = <1>;
37+ #size-cells = <0>;
38+
39+ phy0: ethernet-phy@1 {
40+ reg = <1>;
41+ device_type = "ethernet-phy";
42+ /* We lack the knowledge of necessary GPIO to achieve
43+ * Gigabit
44+ */
45+ max-speed = <100>;
46+ };
47+ };
48+};
49+
50+&ethernet {
51+ status = "okay";
52+ ethernet-port@0 {
53+ phy-mode = "rgmii";
54+ phy-handle = <&phy0>;
55+ };
56+};
57+
58+&flash {
59+ status = "okay";
60+ /* 8MB of flash */
61+ reg = <0x30000000 0x00800000>;
62+
63+ pinctrl-names = "enabled", "disabled";
64+ pinctrl-0 = <&pflash_default_pins>;
65+ pinctrl-1 = <&pflash_disabled_pins>;
66+
67+ partitions {
68+ compatible = "fixed-partitions";
69+ #address-cells = <1>;
70+ #size-cells = <1>;
71+
72+ partition@0 {
73+ label = "RedBoot";
74+ reg = <0x00000000 0x00020000>;
75+ };
76+ partition@20000 {
77+ label = "kernel";
78+ reg = <0x00020000 0x00700000>;
79+ };
80+ partition@720000 {
81+ label = "VCTL";
82+ reg = <0x00720000 0x00020000>;
83+ };
84+ partition@740000 {
85+ label = "CurConf";
86+ reg = <0x00740000 0x000a0000>;
87+ };
88+ partition@7e0000 {
89+ label = "FIS";
90+ reg = <0x007e0000 0x00010000>;
91+ };
92+ };
93+};
94+
95+&gpio0 {
96+ pinctrl-names = "default";
97+ pinctrl-0 = <&gpio0_default_pins>;
98+};
99+
100+&ide0 {
101+ status = "okay";
102+};
103+
104+&ide1 {
105+ status = "okay";
106+};
107+
108+&sata {
109+ cortina,gemini-ata-muxmode = <3>;
110+ cortina,gemini-enable-sata-bridge;
111+ status = "okay";
112+};
113+
114+&syscon {
115+ pinctrl {
116+ /*
117+ * gpio0agrp cover line 0-4
118+ * gpio0bgrp cover line 5
119+ */
120+ gpio0_default_pins: pinctrl-gpio0 {
121+ mux {
122+ function = "gpio0";
123+ groups = "gpio0agrp", "gpio0bgrp", "gpio0hgrp";
124+ };
125+ };
126+ pflash_disabled_pins: pinctrl-pflash-disabled {
127+ mux {
128+ function = "gpio0";
129+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
130+ "gpio0kgrp";
131+ };
132+ };
133+ pinctrl-gmii {
134+ mux {
135+ function = "gmii";
136+ groups = "gmii_gmac0_grp";
137+ };
138+ };
139+ };
140+};
141+
142+&usb0 {
143+ status = "okay";
144+};
145+
146+&usb1 {
147+ status = "okay";
148+};
arch/arm/boot/dts/gemini-sl93512r.dts+0−18
@@ -256,24 +256,6 @@ · 255 unmodified lines
256256
257257 pci@50000000 {
258258 status = "okay";
259− interrupt-map-mask = <0xf800 0 0 7>;
260− interrupt-map =
261− <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
262− <0x4800 0 0 2 &pci_intc 1>,
263− <0x4800 0 0 3 &pci_intc 2>,
264− <0x4800 0 0 4 &pci_intc 3>,
265− <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
266− <0x5000 0 0 2 &pci_intc 2>,
267− <0x5000 0 0 3 &pci_intc 3>,
268− <0x5000 0 0 4 &pci_intc 0>,
269− <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
270− <0x5800 0 0 2 &pci_intc 3>,
271− <0x5800 0 0 3 &pci_intc 0>,
272− <0x5800 0 0 4 &pci_intc 1>,
273− <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
274− <0x6000 0 0 2 &pci_intc 0>,
275− <0x6000 0 0 3 &pci_intc 1>,
276− <0x6000 0 0 4 &pci_intc 2>;
277259 };
278260
279261 ethernet@60000000 {
arch/arm/boot/dts/gemini-sq201.dts+0−18
@@ -252,24 +252,6 @@ · 251 unmodified lines
252252
253253 pci@50000000 {
254254 status = "okay";
255− interrupt-map-mask = <0xf800 0 0 7>;
256− interrupt-map =
257− <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
258− <0x4800 0 0 2 &pci_intc 1>,
259− <0x4800 0 0 3 &pci_intc 2>,
260− <0x4800 0 0 4 &pci_intc 3>,
261− <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
262− <0x5000 0 0 2 &pci_intc 2>,
263− <0x5000 0 0 3 &pci_intc 3>,
264− <0x5000 0 0 4 &pci_intc 0>,
265− <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
266− <0x5800 0 0 2 &pci_intc 3>,
267− <0x5800 0 0 3 &pci_intc 0>,
268− <0x5800 0 0 4 &pci_intc 1>,
269− <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
270− <0x6000 0 0 2 &pci_intc 0>,
271− <0x6000 0 0 3 &pci_intc 1>,
272− <0x6000 0 0 4 &pci_intc 2>;
273255 };
274256
275257 ethernet@60000000 {
arch/arm/boot/dts/gemini-ssi1328.dts+138−0
@@ -0,0 +1,138 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/*
3+ * Copyright (C) 2021 Corentin Labbe <clabbe@baylibre.com>
4+ * Device Tree file for SSI 1328
5+ */
6+
7+/dts-v1/;
8+
9+#include "gemini.dtsi"
10+
11+/ {
12+ model = "SSI 1328";
13+ compatible = "ssi,1328", "cortina,gemini";
14+ #address-cells = <1>;
15+ #size-cells = <1>;
16+
17+ memory@0 {
18+ /* 128 MB */
19+ device_type = "memory";
20+ reg = <0x00000000 0x8000000>;
21+ };
22+
23+ aliases {
24+ mdio-gpio0 = &mdio0;
25+ };
26+
27+ chosen {
28+ bootargs = "console=ttyS0,19200n8 initrd=0x900000,9M";
29+ stdout-path = &uart0;
30+ };
31+
32+ mdio0: mdio {
33+ compatible = "virtual,mdio-gpio";
34+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>, /* MDC */
35+ <&gpio0 21 GPIO_ACTIVE_HIGH>; /* MDIO */
36+ #address-cells = <1>;
37+ #size-cells = <0>;
38+
39+ /* LAN Marvell 88E1118 */
40+ phy0: ethernet-phy@1 {
41+ reg = <1>;
42+ device_type = "ethernet-phy";
43+ /* We lack the knowledge of necessary GPIO to achieve
44+ * Gigabit
45+ */
46+ max-speed = <100>;
47+ };
48+ /* WAN ICPlus IP101A */
49+ phy1: ethernet-phy@2 {
50+ reg = <2>;
51+ device_type = "ethernet-phy";
52+ };
53+ };
54+};
55+
56+&ethernet {
57+ status = "okay";
58+ ethernet-port@0 {
59+ phy-mode = "rgmii";
60+ phy-handle = <&phy0>;
61+ };
62+ ethernet-port@1 {
63+ phy-mode = "rgmii";
64+ phy-handle = <&phy1>;
65+ };
66+};
67+
68+&flash {
69+ status = "okay";
70+ /* 32MB of flash */
71+ reg = <0x30000000 0x03200000>;
72+
73+ pinctrl-names = "enabled", "disabled";
74+ pinctrl-0 = <&pflash_default_pins>;
75+ pinctrl-1 = <&pflash_disabled_pins>;
76+
77+ partitions {
78+ compatible = "redboot-fis";
79+ /* Eraseblock at 0xfe0000 */
80+ fis-index-block = <0x7F>;
81+ };
82+};
83+
84+&gpio0 {
85+ pinctrl-names = "default";
86+ pinctrl-0 = <&gpio0_default_pins>;
87+};
88+
89+&ide0 {
90+ status = "okay";
91+};
92+
93+&ide1 {
94+ status = "okay";
95+};
96+
97+&sata {
98+ cortina,gemini-ata-muxmode = <0>;
99+ cortina,gemini-enable-sata-bridge;
100+ status = "okay";
101+};
102+
103+&syscon {
104+ pinctrl {
105+ /*
106+ * gpio0agrp cover line 0-4
107+ * gpio0bgrp cover line 5
108+ */
109+ gpio0_default_pins: pinctrl-gpio0 {
110+ mux {
111+ function = "gpio0";
112+ groups = "gpio0agrp", "gpio0bgrp";
113+ };
114+ };
115+ pflash_disabled_pins: pinctrl-pflash-disabled {
116+ mux {
117+ function = "gpio0";
118+ groups = "gpio0ggrp", "gpio0igrp", "gpio0jgrp",
119+ "gpio0kgrp";
120+ };
121+ };
122+ pinctrl-gmii {
123+ /* This platform use both the ethernet ports */
124+ mux {
125+ function = "gmii";
126+ groups = "gmii_gmac0_grp", "gmii_gmac1_grp";
127+ };
128+ };
129+ };
130+};
131+
132+&usb0 {
133+ status = "okay";
134+};
135+
136+&usb1 {
137+ status = "okay";
138+};
arch/arm/boot/dts/gemini-wbd111.dts+0−18
@@ -140,24 +140,6 @@ · 139 unmodified lines
140140
141141 pci@50000000 {
142142 status = "okay";
143− interrupt-map-mask = <0xf800 0 0 7>;
144− interrupt-map =
145− <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
146− <0x4800 0 0 2 &pci_intc 1>,
147− <0x4800 0 0 3 &pci_intc 2>,
148− <0x4800 0 0 4 &pci_intc 3>,
149− <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
150− <0x5000 0 0 2 &pci_intc 2>,
151− <0x5000 0 0 3 &pci_intc 3>,
152− <0x5000 0 0 4 &pci_intc 0>,
153− <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
154− <0x5800 0 0 2 &pci_intc 3>,
155− <0x5800 0 0 3 &pci_intc 0>,
156− <0x5800 0 0 4 &pci_intc 1>,
157− <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
158− <0x6000 0 0 2 &pci_intc 0>,
159− <0x6000 0 0 3 &pci_intc 1>,
160− <0x6000 0 0 4 &pci_intc 2>;
161143 };
162144
163145 ethernet@60000000 {
arch/arm/boot/dts/gemini-wbd222.dts+0−18
@@ -151,24 +151,6 @@ · 150 unmodified lines
151151
152152 pci@50000000 {
153153 status = "okay";
154− interrupt-map-mask = <0xf800 0 0 7>;
155− interrupt-map =
156− <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
157− <0x4800 0 0 2 &pci_intc 1>,
158− <0x4800 0 0 3 &pci_intc 2>,
159− <0x4800 0 0 4 &pci_intc 3>,
160− <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
161− <0x5000 0 0 2 &pci_intc 2>,
162− <0x5000 0 0 3 &pci_intc 3>,
163− <0x5000 0 0 4 &pci_intc 0>,
164− <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
165− <0x5800 0 0 2 &pci_intc 3>,
166− <0x5800 0 0 3 &pci_intc 0>,
167− <0x5800 0 0 4 &pci_intc 1>,
168− <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
169− <0x6000 0 0 2 &pci_intc 0>,
170− <0x6000 0 0 3 &pci_intc 1>,
171− <0x6000 0 0 4 &pci_intc 2>;
172154 };
173155
174156 ethernet@60000000 {
arch/arm/boot/dts/gemini.dtsi+26−7
@@ -16,7 +16,7 @@ · 15 unmodified lines
1616 compatible = "simple-bus";
1717 interrupt-parent = <&intcon>;
1818
19− flash@30000000 {
19+ flash: flash@30000000 {
2020 compatible = "cortina,gemini-flash", "cfi-flash";
2121 syscon = <&syscon>;
2222 pinctrl-names = "default";
@@ -289,9 +289,28 @@ · 266 unmodified lines
289289 device_type = "pci";
290290 #address-cells = <3>;
291291 #size-cells = <2>;
292− #interrupt-cells = <1>;
293292 status = "disabled";
294293
294+ #interrupt-cells = <1>;
295+ interrupt-map-mask = <0xf800 0 0 7>;
296+ interrupt-map =
297+ <0x4800 0 0 1 &pci_intc 0>, /* Slot 9 */
298+ <0x4800 0 0 2 &pci_intc 1>,
299+ <0x4800 0 0 3 &pci_intc 2>,
300+ <0x4800 0 0 4 &pci_intc 3>,
301+ <0x5000 0 0 1 &pci_intc 1>, /* Slot 10 */
302+ <0x5000 0 0 2 &pci_intc 2>,
303+ <0x5000 0 0 3 &pci_intc 3>,
304+ <0x5000 0 0 4 &pci_intc 0>,
305+ <0x5800 0 0 1 &pci_intc 2>, /* Slot 11 */
306+ <0x5800 0 0 2 &pci_intc 3>,
307+ <0x5800 0 0 3 &pci_intc 0>,
308+ <0x5800 0 0 4 &pci_intc 1>,
309+ <0x6000 0 0 1 &pci_intc 3>, /* Slot 12 */
310+ <0x6000 0 0 2 &pci_intc 0>,
311+ <0x6000 0 0 3 &pci_intc 1>,
312+ <0x6000 0 0 4 &pci_intc 2>;
313+
295314 bus-range = <0x00 0xff>;
296315 /* PCI ranges mappings */
297316 ranges =
@@ -322,7 +341,7 @@ · 24 unmodified lines
322341 };
323342 };
324343
325− ethernet@60000000 {
344+ ethernet: ethernet@60000000 {
326345 compatible = "cortina,gemini-ethernet";
327346 reg = <0x60000000 0x4000>, /* Global registers, queue */
328347 <0x60004000 0x2000>, /* V-bit */
@@ -365,7 +384,7 @@ · 36 unmodified lines
365384 clocks = <&syscon GEMINI_CLK_GATE_SECURITY>;
366385 };
367386
368− ide@63000000 {
387+ ide0: ide@63000000 {
369388 compatible = "cortina,gemini-pata", "faraday,ftide010";
370389 reg = <0x63000000 0x1000>;
371390 interrupts = <4 IRQ_TYPE_EDGE_RISING>;
@@ -378,7 +397,7 @@ · 6 unmodified lines
378397 #size-cells = <0>;
379398 };
380399
381− ide@63400000 {
400+ ide1: ide@63400000 {
382401 compatible = "cortina,gemini-pata", "faraday,ftide010";
383402 reg = <0x63400000 0x1000>;
384403 interrupts = <5 IRQ_TYPE_EDGE_RISING>;
@@ -421,7 +440,7 @@ · 36 unmodified lines
421440 status = "disabled";
422441 };
423442
424− usb@68000000 {
443+ usb0: usb@68000000 {
425444 compatible = "cortina,gemini-usb", "faraday,fotg210";
426445 reg = <0x68000000 0x1000>;
427446 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
@@ -442,7 +461,7 @@ · 14 unmodified lines
442461 status = "disabled";
443462 };
444463
445− usb@69000000 {
464+ usb1: usb@69000000 {
446465 compatible = "cortina,gemini-usb", "faraday,fotg210";
447466 reg = <0x69000000 0x1000>;
448467 interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/imx6dl-alti6p.dts+1−1
@@ -192,7 +192,7 @@ · 191 unmodified lines
192192 };
193193
194194 &ecspi1 {
195− cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
195+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
196196 pinctrl-names = "default";
197197 pinctrl-0 = <&pinctrl_ecspi1>;
198198 status = "okay";
arch/arm/boot/dts/imx6dl-b1x5v2.dtsi+0−1
@@ -47,7 +47,6 @@ · 46 unmodified lines
4747 mpl3115a2: pressure-sensor@60 {
4848 compatible = "fsl,mpl3115";
4949 reg = <0x60>;
50− vcc-supply = <&reg_3v3_acm>;
5150
5251 /*
5352 * The MPL3115 interrupts are connected to pin 22 and 23
arch/arm/boot/dts/imx6dl-prtrvt.dts+0−2
@@ -67,11 +67,9 @@ · 66 unmodified lines
6767 ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
6868 <&gpio5 11 GPIO_ACTIVE_LOW>;
6969 vin-supply = <&reg_3v3>;
70− vin-voltage-override = <3100000>;
7170 autosuspend-delay = <30000>;
7271 irq-status-read-quirk;
7372 en2-rf-quirk;
74− t5t-rmb-extra-byte-quirk;
7573 status = "okay";
7674 };
7775 };
arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts+1−0
@@ -6,6 +6,7 @@ · 5 unmodified lines
66 #include "imx6dl.dtsi"
77 #include "imx6qdl-skov-cpu.dtsi"
88 #include "imx6qdl-skov-cpu-revc.dtsi"
9+#include "imx6qdl-skov-revc-lt2.dtsi"
910
1011 / {
1112 model = "SKOV IMX6 CPU SoloCore";
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi+0−8
@@ -296,14 +296,6 @@ · 295 unmodified lines
296296 reg = <2>;
297297 color = <LED_COLOR_ID_BLUE>;
298298 };
299−
300− chan@3 {
301− chan-name = "W";
302− led-cur = /bits/ 8 <0x0>;
303− max-cur = /bits/ 8 <0x0>;
304− reg = <3>;
305− color = <LED_COLOR_ID_WHITE>;
306− };
307299 };
308300
309301 eeprom@57 {
arch/arm/boot/dts/imx6q-skov-revc-lt2.dts+1−0
@@ -6,6 +6,7 @@ · 5 unmodified lines
66 #include "imx6q.dtsi"
77 #include "imx6qdl-skov-cpu.dtsi"
88 #include "imx6qdl-skov-cpu-revc.dtsi"
9+#include "imx6qdl-skov-revc-lt2.dtsi"
910
1011 / {
1112 model = "SKOV IMX6 CPU QuadCore";
arch/arm/boot/dts/imx6qdl-apalis.dtsi+4−3
@@ -310,10 +310,10 @@ · 309 unmodified lines
310310 st,mod-12b = <1>;
311311 /* internal ADC reference */
312312 st,ref-sel = <0>;
313− /* ADC converstion time: 80 clocks */
313+ /* ADC conversion time: 80 clocks */
314314 st,sample-time = <4>;
315315
316− stmpe_touchscreen {
316+ stmpe_touchscreen: stmpe-touchscreen {
317317 compatible = "st,stmpe-ts";
318318 /* 8 sample average control */
319319 st,ave-ctrl = <3>;
@@ -330,10 +330,11 @@ · 10 unmodified lines
330330 st,touch-det-delay = <5>;
331331 };
332332
333− stmpe_adc {
333+ stmpe_adc: stmpe-adc {
334334 compatible = "st,stmpe-adc";
335335 /* forbid to use ADC channels 3-0 (touch) */
336336 st,norequest-mask = <0x0F>;
337+ #io-channel-cells = <1>;
337338 };
338339 };
339340 };
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi+26−5
@@ -145,8 +145,11 @@ · 144 unmodified lines
145145 };
146146
147147 &i2c1 {
148− pinctrl-names = "default";
148+ pinctrl-names = "default", "gpio";
149149 pinctrl-0 = <&pinctrl_i2c1>;
150+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
151+ scl-gpios = <&gpio3 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
152+ sda-gpios = <&gpio3 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
150153 clock-frequency = <400000>;
151154 status = "disabled";
152155
@@ -185,8 +188,11 @@ · 32 unmodified lines
185188 };
186189
187190 &i2c2 {
188− pinctrl-names = "default";
191+ pinctrl-names = "default", "gpio";
189192 pinctrl-0 = <&pinctrl_i2c2>;
193+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
194+ scl-gpios = <&gpio4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
195+ sda-gpios = <&gpio4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
190196 clock-frequency = <100000>;
191197 status = "disabled";
192198 };
@@ -256,6 +262,7 @@ · 63 unmodified lines
256262 pinctrl-0 = <&pinctrl_usdhc1>;
257263 cd-gpios = <&gpio6 31 GPIO_ACTIVE_LOW>;
258264 no-1-8-v;
265+ disable-wp;
259266 status = "disabled";
260267 };
261268
@@ -299,6 +306,20 @@ · 37 unmodified lines
299306 >;
300307 };
301308
309+ pinctrl_i2c1: i2c1grp {
310+ fsl,pins = <
311+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
312+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
313+ >;
314+ };
315+
316+ pinctrl_i2c1_gpio: i2c1gpiogrp {
317+ fsl,pins = <
318+ MX6QDL_PAD_EIM_D21__GPIO3_IO21 0x4001b8b1
319+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x4001b8b1
320+ >;
321+ };
322+
302323 pinctrl_i2c2: i2c2grp {
303324 fsl,pins = <
304325 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
@@ -306,10 +327,10 @@ · 1 unmodified line
306327 >;
307328 };
308329
309− pinctrl_i2c1: i2c1grp {
330+ pinctrl_i2c2_gpio: i2c2gpiogrp {
310331 fsl,pins = <
311− MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
312− MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
332+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x4001b8b1
333+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x4001b8b1
313334 >;
314335 };
315336
arch/arm/boot/dts/imx6qdl-phytec-phycore-som.dtsi+11−1
@@ -78,8 +78,11 @@ · 77 unmodified lines
7878 };
7979
8080 &i2c3 {
81− pinctrl-names = "default";
81+ pinctrl-names = "default", "gpio";
8282 pinctrl-0 = <&pinctrl_i2c3>;
83+ pinctrl-1 = <&pinctrl_i2c3_gpio>;
84+ scl-gpios = <&gpio1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
85+ sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
8386 clock-frequency = <400000>;
8487 status = "okay";
8588
@@ -259,6 +262,13 @@ · 173 unmodified lines
259262 >;
260263 };
261264
265+ pinctrl_i2c3_gpio: i2c3gpiogrp {
266+ fsl,pins = <
267+ MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x4001b8b1
268+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x4001b8b1
269+ >;
270+ };
271+
262272 pinctrl_ecspi1: ecspi1grp {
263273 fsl,pins = <
264274 MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
arch/arm/boot/dts/imx6qdl-skov-revc-lt2.dtsi+99−0
@@ -0,0 +1,99 @@
1+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2+//
3+// Copyright (C) 2021 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
4+
5+/ {
6+ backlight: backlight {
7+ compatible = "pwm-backlight";
8+ pinctrl-names = "default";
9+ pinctrl-0 = <&pinctrl_backlight>;
10+ enable-gpios = <&gpio6 23 GPIO_ACTIVE_LOW>;
11+ pwms = <&pwm2 0 20000 0>;
12+ brightness-levels = <0 255>;
13+ num-interpolated-steps = <17>;
14+ default-brightness-level = <8>;
15+ power-supply = <&reg_24v0>;
16+ };
17+
18+ display {
19+ #address-cells = <1>;
20+ #size-cells = <0>;
21+
22+ compatible = "fsl,imx-parallel-display";
23+ pinctrl-names = "default";
24+ pinctrl-0 = <&pinctrl_ipu1>;
25+
26+ port@0 {
27+ reg = <0>;
28+
29+ display0_in: endpoint {
30+ remote-endpoint = <&ipu1_di0_disp0>;
31+ };
32+ };
33+
34+ port@1 {
35+ reg = <1>;
36+
37+ display0_out: endpoint {
38+ remote-endpoint = <&panel_in>;
39+ };
40+ };
41+ };
42+
43+ panel {
44+ compatible = "logictechno,lttd800480070-l2rt";
45+ backlight = <&backlight>;
46+ power-supply = <&reg_3v3>;
47+
48+ port {
49+ panel_in: endpoint {
50+ remote-endpoint = <&display0_out>;
51+ };
52+ };
53+ };
54+};
55+
56+&ipu1_di0_disp0 {
57+ remote-endpoint = <&display0_in>;
58+};
59+
60+&iomuxc {
61+ pinctrl_backlight: backlightgrp {
62+ fsl,pins = <
63+ MX6QDL_PAD_RGMII_TD3__GPIO6_IO23 0x58
64+ >;
65+ };
66+
67+ pinctrl_ipu1: ipu1grp {
68+ fsl,pins = <
69+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
70+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10
71+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10
72+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10
73+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10
74+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10
75+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10
76+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10
77+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10
78+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10
79+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10
80+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10
81+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10
82+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10
83+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10
84+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10
85+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10
86+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10
87+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10
88+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10
89+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10
90+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10
91+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10
92+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10
93+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10
94+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10
95+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10
96+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10
97+ >;
98+ };
99+};
arch/arm/boot/dts/imx6qdl-tqma6.dtsi+1−1
@@ -20,7 +20,7 @@ · 19 unmodified lines
2020 &ecspi1 {
2121 pinctrl-names = "default";
2222 pinctrl-0 = <&pinctrl_ecspi1>;
23− cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
23+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
2424 status = "okay";
2525
2626 m25p80: flash@0 {
arch/arm/boot/dts/imx6qdl.dtsi+3−4
@@ -264,7 +264,7 @@ · 263 unmodified lines
264264 };
265265
266266 pcie: pcie@1ffc000 {
267− compatible = "fsl,imx6q-pcie", "snps,dw-pcie";
267+ compatible = "fsl,imx6q-pcie";
268268 reg = <0x01ffc000 0x04000>,
269269 <0x01f00000 0x80000>;
270270 reg-names = "dbi", "config";
@@ -272,10 +272,9 @@ · 1 unmodified line
272272 #size-cells = <2>;
273273 device_type = "pci";
274274 bus-range = <0x00 0xff>;
275− ranges = <0x81000000 0 0 0x01f80000 0 0x00010000 /* downstream I/O */
276− 0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
275+ ranges = <0x81000000 0 0 0x01f80000 0 0x00010000>, /* downstream I/O */
276+ <0x82000000 0 0x01000000 0x01000000 0 0x00f00000>; /* non-prefetchable memory */
277277 num-lanes = <1>;
278− num-viewport = <4>;
279278 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
280279 interrupt-names = "msi";
281280 #interrupt-cells = <1>;
arch/arm/boot/dts/imx6qp-prtwd3.dts+2−2
@@ -123,7 +123,7 @@ · 122 unmodified lines
123123 };
124124
125125 &ecspi2 {
126− cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
126+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
127127 pinctrl-names = "default";
128128 pinctrl-0 = <&pinctrl_ecspi2>;
129129 status = "okay";
@@ -189,7 +189,7 @@ · 59 unmodified lines
189189 };
190190
191191 &ecspi3 {
192− cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
192+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
193193 pinctrl-names = "default";
194194 pinctrl-0 = <&pinctrl_ecspi3>;
195195 status = "okay";
arch/arm/boot/dts/imx6qp.dtsi+1−1
@@ -110,5 +110,5 @@ · 109 unmodified lines
110110 };
111111
112112 &pcie {
113− compatible = "fsl,imx6qp-pcie", "snps,dw-pcie";
113+ compatible = "fsl,imx6qp-pcie";
114114 };
arch/arm/boot/dts/imx6sl-tolino-vision5.dts+349−0
@@ -0,0 +1,349 @@
1+// SPDX-License-Identifier: (GPL-2.0)
2+/*
3+ * Device tree for the Tolino Vision 5 ebook reader
4+ *
5+ * Name on mainboard is: 37NB-E70K0M+6A3
6+ * Serials start with: E70K02 (a number also seen in
7+ * vendor kernel sources)
8+ *
9+ * This mainboard seems to be equipped with different SoCs.
10+ * In the Tolino Vision 5 ebook reader it is a i.MX6SL
11+ *
12+ * Copyright 2021 Andreas Kemnade
13+ * based on works
14+ * Copyright 2016 Freescale Semiconductor, Inc.
15+ */
16+
17+/dts-v1/;
18+
19+#include <dt-bindings/input/input.h>
20+#include <dt-bindings/gpio/gpio.h>
21+#include "imx6sl.dtsi"
22+#include "e70k02.dtsi"
23+
24+/ {
25+ model = "Tolino Vision 5";
26+ compatible = "kobo,tolino-vision5", "fsl,imx6sl";
27+};
28+
29+&gpio_keys {
30+ pinctrl-names = "default";
31+ pinctrl-0 = <&pinctrl_gpio_keys>;
32+};
33+
34+&i2c1 {
35+ pinctrl-names = "default","sleep";
36+ pinctrl-0 = <&pinctrl_i2c1>;
37+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
38+};
39+
40+&i2c2 {
41+ pinctrl-names = "default","sleep";
42+ pinctrl-0 = <&pinctrl_i2c2>;
43+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
44+};
45+
46+&i2c3 {
47+ pinctrl-names = "default";
48+ pinctrl-0 = <&pinctrl_i2c3>;
49+};
50+
51+&iomuxc {
52+ pinctrl-names = "default";
53+ pinctrl-0 = <&pinctrl_hog>;
54+
55+ pinctrl_gpio_keys: gpio-keysgrp {
56+ fsl,pins = <
57+ MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x17059 /* PWR_SW */
58+ MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x17059 /* HALL_EN */
59+ MX6SL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
60+ MX6SL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
61+ >;
62+ };
63+
64+ pinctrl_hog: hoggrp {
65+ fsl,pins = <
66+ MX6SL_PAD_LCD_DAT1__GPIO2_IO21 0x79
67+ MX6SL_PAD_LCD_DAT4__GPIO2_IO24 0x79
68+ MX6SL_PAD_LCD_DAT5__GPIO2_IO25 0x79
69+ MX6SL_PAD_LCD_DAT6__GPIO2_IO26 0x79
70+ MX6SL_PAD_LCD_DAT7__GPIO2_IO27 0x79
71+ MX6SL_PAD_LCD_DAT8__GPIO2_IO28 0x79
72+ MX6SL_PAD_LCD_DAT9__GPIO2_IO29 0x79
73+ MX6SL_PAD_LCD_DAT10__GPIO2_IO30 0x79
74+ MX6SL_PAD_LCD_DAT11__GPIO2_IO31 0x79
75+ MX6SL_PAD_LCD_DAT12__GPIO3_IO00 0x79
76+ MX6SL_PAD_LCD_DAT13__GPIO3_IO01 0x79
77+ MX6SL_PAD_LCD_DAT14__GPIO3_IO02 0x79
78+ MX6SL_PAD_LCD_DAT15__GPIO3_IO03 0x79
79+ MX6SL_PAD_LCD_DAT16__GPIO3_IO04 0x79
80+ MX6SL_PAD_LCD_DAT17__GPIO3_IO05 0x79
81+ MX6SL_PAD_LCD_DAT18__GPIO3_IO06 0x79
82+ MX6SL_PAD_LCD_DAT19__GPIO3_IO07 0x79
83+ MX6SL_PAD_LCD_DAT20__GPIO3_IO08 0x79
84+ MX6SL_PAD_LCD_DAT21__GPIO3_IO09 0x79
85+ MX6SL_PAD_LCD_DAT22__GPIO3_IO10 0x79
86+ MX6SL_PAD_LCD_DAT23__GPIO3_IO11 0x79
87+ MX6SL_PAD_LCD_CLK__GPIO2_IO15 0x79
88+ MX6SL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
89+ MX6SL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
90+ MX6SL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
91+ MX6SL_PAD_LCD_RESET__GPIO2_IO19 0x79
92+ MX6SL_PAD_FEC_TX_CLK__GPIO4_IO21 0x79
93+ MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x79
94+ MX6SL_PAD_KEY_COL3__GPIO3_IO30 0x79
95+ MX6SL_PAD_KEY_ROW7__GPIO4_IO07 0x79
96+ MX6SL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
97+ >;
98+ };
99+
100+ pinctrl_i2c1: i2c1grp {
101+ fsl,pins = <
102+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
103+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
104+ >;
105+ };
106+
107+ pinctrl_i2c1_sleep: i2c1grp-sleep {
108+ fsl,pins = <
109+ MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
110+ MX6SL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
111+ >;
112+ };
113+
114+ pinctrl_i2c2: i2c2grp {
115+ fsl,pins = <
116+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
117+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
118+ >;
119+ };
120+
121+ pinctrl_i2c2_sleep: i2c2grp-sleep {
122+ fsl,pins = <
123+ MX6SL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
124+ MX6SL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
125+ >;
126+ };
127+
128+ pinctrl_i2c3: i2c3grp {
129+ fsl,pins = <
130+ MX6SL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
131+ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
132+ >;
133+ };
134+
135+ pinctrl_led: ledgrp {
136+ fsl,pins = <
137+ MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x10059
138+ >;
139+ };
140+
141+ pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
142+ fsl,pins = <
143+ MX6SL_PAD_EPDC_PWRCTRL3__GPIO2_IO10 0x10059 /* HWEN */
144+ >;
145+ };
146+
147+ pinctrl_ricoh_gpio: ricoh-gpiogrp {
148+ fsl,pins = <
149+ MX6SL_PAD_FEC_MDIO__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
150+ MX6SL_PAD_FEC_RX_ER__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
151+ MX6SL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
152+ >;
153+ };
154+
155+ pinctrl_uart1: uart1grp {
156+ fsl,pins = <
157+ MX6SL_PAD_UART1_TXD__UART1_TX_DATA 0x1b0b1
158+ MX6SL_PAD_UART1_RXD__UART1_RX_DATA 0x1b0b1
159+ >;
160+ };
161+
162+ pinctrl_usbotg1: usbotg1grp {
163+ fsl,pins = <
164+ MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID 0x17059
165+ >;
166+ };
167+
168+ pinctrl_usdhc1: usdhc1grp {
169+ fsl,pins = <
170+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x17059
171+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x17059
172+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x17059
173+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x17059
174+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x17059
175+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x17059
176+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x17059
177+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x17059
178+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x17059
179+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x17059
180+ >;
181+ };
182+
183+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
184+ fsl,pins = <
185+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170b9
186+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x170b9
187+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170b9
188+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170b9
189+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170b9
190+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170b9
191+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
192+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
193+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
194+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
195+ >;
196+ };
197+
198+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
199+ fsl,pins = <
200+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x170f9
201+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x170f9
202+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
203+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
204+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
205+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
206+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x170b9
207+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x170b9
208+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x170b9
209+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x170b9
210+ >;
211+ };
212+
213+ pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
214+ fsl,pins = <
215+ MX6SL_PAD_SD1_CMD__SD1_CMD 0x10059
216+ MX6SL_PAD_SD1_CLK__SD1_CLK 0x10059
217+ MX6SL_PAD_SD1_DAT0__SD1_DATA0 0x10059
218+ MX6SL_PAD_SD1_DAT1__SD1_DATA1 0x10059
219+ MX6SL_PAD_SD1_DAT2__SD1_DATA2 0x10059
220+ MX6SL_PAD_SD1_DAT3__SD1_DATA3 0x10059
221+ MX6SL_PAD_SD1_DAT4__SD1_DATA4 0x10059
222+ MX6SL_PAD_SD1_DAT5__SD1_DATA5 0x10059
223+ MX6SL_PAD_SD1_DAT6__SD1_DATA6 0x10059
224+ MX6SL_PAD_SD1_DAT7__SD1_DATA7 0x10059
225+ >;
226+ };
227+
228+ pinctrl_usdhc3: usdhc3grp {
229+ fsl,pins = <
230+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x11059
231+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x11059
232+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x11059
233+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x11059
234+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x11059
235+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x11059
236+ >;
237+ };
238+
239+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
240+ fsl,pins = <
241+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170b9
242+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170b9
243+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
244+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
245+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
246+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
247+ >;
248+ };
249+
250+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
251+ fsl,pins = <
252+ MX6SL_PAD_SD3_CMD__SD3_CMD 0x170f9
253+ MX6SL_PAD_SD3_CLK__SD3_CLK 0x170f9
254+ MX6SL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
255+ MX6SL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
256+ MX6SL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
257+ MX6SL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
258+ >;
259+ };
260+
261+ pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
262+ fsl,pins = <
263+ MX6SL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
264+ MX6SL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
265+ MX6SL_PAD_SD3_DAT0__GPIO5_IO19 0x100c1
266+ MX6SL_PAD_SD3_DAT1__GPIO5_IO20 0x100c1
267+ MX6SL_PAD_SD3_DAT2__GPIO5_IO16 0x100c1
268+ MX6SL_PAD_SD3_DAT3__GPIO5_IO17 0x100c1
269+ >;
270+ };
271+
272+ pinctrl_wifi_power: wifi-powergrp {
273+ fsl,pins = <
274+ MX6SL_PAD_SD2_DAT6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
275+ >;
276+ };
277+
278+ pinctrl_wifi_reset: wifi-resetgrp {
279+ fsl,pins = <
280+ MX6SL_PAD_SD2_DAT7__GPIO5_IO00 0x10059 /* WIFI_RST */
281+ >;
282+ };
283+};
284+
285+&leds {
286+ pinctrl-names = "default";
287+ pinctrl-0 = <&pinctrl_led>;
288+};
289+
290+&lm3630a {
291+ pinctrl-names = "default";
292+ pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
293+};
294+
295+&reg_wifi {
296+ pinctrl-names = "default";
297+ pinctrl-0 = <&pinctrl_wifi_power>;
298+};
299+
300+&reg_vdd1p1 {
301+ vin-supply = <&dcdc2_reg>;
302+};
303+
304+&reg_vdd2p5 {
305+ vin-supply = <&dcdc2_reg>;
306+};
307+
308+&reg_arm {
309+ vin-supply = <&dcdc3_reg>;
310+};
311+
312+&reg_soc {
313+ vin-supply = <&dcdc1_reg>;
314+};
315+
316+&reg_pu {
317+ vin-supply = <&dcdc1_reg>;
318+};
319+
320+&ricoh619 {
321+ pinctrl-names = "default";
322+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
323+};
324+
325+&uart1 {
326+ pinctrl-names = "default";
327+ pinctrl-0 = <&pinctrl_uart1>;
328+};
329+
330+&usdhc1 {
331+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
332+ pinctrl-0 = <&pinctrl_usdhc1>;
333+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
334+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
335+ pinctrl-3 = <&pinctrl_usdhc1_sleep>;
336+};
337+
338+&usdhc3 {
339+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
340+ pinctrl-0 = <&pinctrl_usdhc3>;
341+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
342+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
343+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
344+};
345+
346+&wifi_pwrseq {
347+ pinctrl-names = "default";
348+ pinctrl-0 = <&pinctrl_wifi_reset>;
349+};
arch/arm/boot/dts/imx6sl.dtsi+8−10
@@ -55,18 +55,16 @@ · 54 unmodified lines
5555 device_type = "cpu";
5656 reg = <0x0>;
5757 next-level-cache = <&L2>;
58− operating-points = <
58+ operating-points =
5959 /* kHz uV */
60− 996000 1275000
61− 792000 1175000
62− 396000 975000
63− >;
64− fsl,soc-operating-points = <
60+ <996000 1275000>,
61+ <792000 1175000>,
62+ <396000 975000>;
63+ fsl,soc-operating-points =
6564 /* ARM kHz SOC-PU uV */
66− 996000 1225000
67− 792000 1175000
68− 396000 1175000
69− >;
65+ <996000 1225000>,
66+ <792000 1175000>,
67+ <396000 1175000>;
7068 clock-latency = <61036>; /* two CLK32 periods */
7169 #cooling-cells = <2>;
7270 clocks = <&clks IMX6SL_CLK_ARM>, <&clks IMX6SL_CLK_PLL2_PFD2>,
arch/arm/boot/dts/imx6sll-kobo-librah2o.dts+339−0
@@ -0,0 +1,339 @@
1+// SPDX-License-Identifier: (GPL-2.0)
2+/*
3+ * Device tree for the Kobo Libra H2O ebook reader
4+ *
5+ * Name on mainboard is: 37NB-E70K0M+6A3
6+ * Serials start with: E70K02 (a number also seen in
7+ * vendor kernel sources)
8+ *
9+ * This mainboard seems to be equipped with different SoCs.
10+ * In the Kobo Libra H2O ebook reader it is an i.MX6SLL
11+ *
12+ * Copyright 2021 Andreas Kemnade
13+ * based on works
14+ * Copyright 2016 Freescale Semiconductor, Inc.
15+ */
16+
17+/dts-v1/;
18+
19+#include <dt-bindings/input/input.h>
20+#include <dt-bindings/gpio/gpio.h>
21+#include "imx6sll.dtsi"
22+#include "e70k02.dtsi"
23+
24+/ {
25+ model = "Kobo Libra H2O";
26+ compatible = "kobo,librah2o", "fsl,imx6sll";
27+};
28+
29+&clks {
30+ assigned-clocks = <&clks IMX6SLL_CLK_PLL4_AUDIO_DIV>;
31+ assigned-clock-rates = <393216000>;
32+};
33+
34+&cpu0 {
35+ arm-supply = <&dcdc3_reg>;
36+ soc-supply = <&dcdc1_reg>;
37+};
38+
39+&gpio_keys {
40+ pinctrl-names = "default";
41+ pinctrl-0 = <&pinctrl_gpio_keys>;
42+};
43+
44+&i2c1 {
45+ pinctrl-names = "default","sleep";
46+ pinctrl-0 = <&pinctrl_i2c1>;
47+ pinctrl-1 = <&pinctrl_i2c1_sleep>;
48+};
49+
50+&i2c2 {
51+ pinctrl-names = "default","sleep";
52+ pinctrl-0 = <&pinctrl_i2c2>;
53+ pinctrl-1 = <&pinctrl_i2c2_sleep>;
54+};
55+
56+&i2c3 {
57+ pinctrl-names = "default";
58+ pinctrl-0 = <&pinctrl_i2c3>;
59+};
60+
61+&iomuxc {
62+ pinctrl-names = "default";
63+ pinctrl-0 = <&pinctrl_hog>;
64+
65+ pinctrl_gpio_keys: gpio-keysgrp {
66+ fsl,pins = <
67+ MX6SLL_PAD_GPIO4_IO25__GPIO4_IO25 0x17059 /* PWR_SW */
68+ MX6SLL_PAD_GPIO4_IO23__GPIO4_IO23 0x17059 /* HALL_EN */
69+ MX6SLL_PAD_KEY_COL4__GPIO4_IO00 0x17059 /* PAGE_UP */
70+ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059 /* PAGE_DOWN */
71+ >;
72+ };
73+
74+ pinctrl_hog: hoggrp {
75+ fsl,pins = <
76+ MX6SLL_PAD_LCD_DATA01__GPIO2_IO21 0x79
77+ MX6SLL_PAD_LCD_DATA04__GPIO2_IO24 0x79
78+ MX6SLL_PAD_LCD_DATA05__GPIO2_IO25 0x79
79+ MX6SLL_PAD_LCD_DATA06__GPIO2_IO26 0x79
80+ MX6SLL_PAD_LCD_DATA07__GPIO2_IO27 0x79
81+ MX6SLL_PAD_LCD_DATA08__GPIO2_IO28 0x79
82+ MX6SLL_PAD_LCD_DATA09__GPIO2_IO29 0x79
83+ MX6SLL_PAD_LCD_DATA10__GPIO2_IO30 0x79
84+ MX6SLL_PAD_LCD_DATA11__GPIO2_IO31 0x79
85+ MX6SLL_PAD_LCD_DATA12__GPIO3_IO00 0x79
86+ MX6SLL_PAD_LCD_DATA13__GPIO3_IO01 0x79
87+ MX6SLL_PAD_LCD_DATA14__GPIO3_IO02 0x79
88+ MX6SLL_PAD_LCD_DATA15__GPIO3_IO03 0x79
89+ MX6SLL_PAD_LCD_DATA16__GPIO3_IO04 0x79
90+ MX6SLL_PAD_LCD_DATA17__GPIO3_IO05 0x79
91+ MX6SLL_PAD_LCD_DATA18__GPIO3_IO06 0x79
92+ MX6SLL_PAD_LCD_DATA19__GPIO3_IO07 0x79
93+ MX6SLL_PAD_LCD_DATA20__GPIO3_IO08 0x79
94+ MX6SLL_PAD_LCD_DATA21__GPIO3_IO09 0x79
95+ MX6SLL_PAD_LCD_DATA22__GPIO3_IO10 0x79
96+ MX6SLL_PAD_LCD_DATA23__GPIO3_IO11 0x79
97+ MX6SLL_PAD_LCD_CLK__GPIO2_IO15 0x79
98+ MX6SLL_PAD_LCD_ENABLE__GPIO2_IO16 0x79
99+ MX6SLL_PAD_LCD_HSYNC__GPIO2_IO17 0x79
100+ MX6SLL_PAD_LCD_VSYNC__GPIO2_IO18 0x79
101+ MX6SLL_PAD_LCD_RESET__GPIO2_IO19 0x79
102+ MX6SLL_PAD_GPIO4_IO21__GPIO4_IO21 0x79
103+ MX6SLL_PAD_GPIO4_IO26__GPIO4_IO26 0x79
104+ MX6SLL_PAD_KEY_COL3__GPIO3_IO30 0x79
105+ MX6SLL_PAD_KEY_ROW7__GPIO4_IO07 0x79
106+ MX6SLL_PAD_ECSPI2_MOSI__GPIO4_IO13 0x79
107+ >;
108+ };
109+
110+ pinctrl_i2c1: i2c1grp {
111+ fsl,pins = <
112+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x4001f8b1
113+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x4001f8b1
114+ >;
115+ };
116+
117+ pinctrl_i2c1_sleep: i2c1grp-sleep {
118+ fsl,pins = <
119+ MX6SLL_PAD_I2C1_SCL__I2C1_SCL 0x400108b1
120+ MX6SLL_PAD_I2C1_SDA__I2C1_SDA 0x400108b1
121+ >;
122+ };
123+
124+ pinctrl_i2c2: i2c2grp {
125+ fsl,pins = <
126+ MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x4001f8b1
127+ MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x4001f8b1
128+ >;
129+ };
130+
131+ pinctrl_i2c2_sleep: i2c2grp-sleep {
132+ fsl,pins = <
133+ MX6SLL_PAD_I2C2_SCL__I2C2_SCL 0x400108b1
134+ MX6SLL_PAD_I2C2_SDA__I2C2_SDA 0x400108b1
135+ >;
136+ };
137+
138+ pinctrl_i2c3: i2c3grp {
139+ fsl,pins = <
140+ MX6SLL_PAD_REF_CLK_24M__I2C3_SCL 0x4001f8b1
141+ MX6SLL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
142+ >;
143+ };
144+
145+ pinctrl_led: ledgrp {
146+ fsl,pins = <
147+ MX6SLL_PAD_GPIO4_IO17__GPIO4_IO17 0x10059
148+ >;
149+ };
150+
151+ pinctrl_lm3630a_bl_gpio: lm3630a-bl-gpiogrp {
152+ fsl,pins = <
153+ MX6SLL_PAD_EPDC_PWR_CTRL3__GPIO2_IO10 0x10059 /* HWEN */
154+ >;
155+ };
156+
157+ pinctrl_ricoh_gpio: ricoh-gpiogrp {
158+ fsl,pins = <
159+ MX6SLL_PAD_GPIO4_IO20__GPIO4_IO20 0x1b8b1 /* ricoh619 chg */
160+ MX6SLL_PAD_GPIO4_IO19__GPIO4_IO19 0x1b8b1 /* ricoh619 irq */
161+ MX6SLL_PAD_KEY_COL2__GPIO3_IO28 0x1b8b1 /* ricoh619 bat_low_int */
162+ >;
163+ };
164+
165+ pinctrl_uart1: uart1grp {
166+ fsl,pins = <
167+ MX6SLL_PAD_UART1_TXD__UART1_DCE_TX 0x1b0b1
168+ MX6SLL_PAD_UART1_RXD__UART1_DCE_RX 0x1b0b1
169+ >;
170+ };
171+
172+ pinctrl_usbotg1: usbotg1grp {
173+ fsl,pins = <
174+ MX6SLL_PAD_EPDC_PWR_COM__USB_OTG1_ID 0x17059
175+ >;
176+ };
177+
178+ pinctrl_usdhc1: usdhc1grp {
179+ fsl,pins = <
180+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x17059
181+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x17059
182+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x17059
183+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x17059
184+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x17059
185+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x17059
186+ MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x17059
187+ MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x17059
188+ MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x17059
189+ MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x17059
190+ >;
191+ };
192+
193+ pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
194+ fsl,pins = <
195+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170b9
196+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170b9
197+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170b9
198+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170b9
199+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170b9
200+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170b9
201+ MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
202+ MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
203+ MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
204+ MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
205+ >;
206+ };
207+
208+ pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
209+ fsl,pins = <
210+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x170f9
211+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x170f9
212+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x170f9
213+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x170f9
214+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x170f9
215+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x170f9
216+ MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x170b9
217+ MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x170b9
218+ MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x170b9
219+ MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x170b9
220+ >;
221+ };
222+
223+ pinctrl_usdhc1_sleep: usdhc1-sleepgrp {
224+ fsl,pins = <
225+ MX6SLL_PAD_SD1_CMD__SD1_CMD 0x10059
226+ MX6SLL_PAD_SD1_CLK__SD1_CLK 0x10059
227+ MX6SLL_PAD_SD1_DATA0__SD1_DATA0 0x10059
228+ MX6SLL_PAD_SD1_DATA1__SD1_DATA1 0x10059
229+ MX6SLL_PAD_SD1_DATA2__SD1_DATA2 0x10059
230+ MX6SLL_PAD_SD1_DATA3__SD1_DATA3 0x10059
231+ MX6SLL_PAD_SD1_DATA4__SD1_DATA4 0x10059
232+ MX6SLL_PAD_SD1_DATA5__SD1_DATA5 0x10059
233+ MX6SLL_PAD_SD1_DATA6__SD1_DATA6 0x10059
234+ MX6SLL_PAD_SD1_DATA7__SD1_DATA7 0x10059
235+ >;
236+ };
237+
238+ pinctrl_usdhc3: usdhc3grp {
239+ fsl,pins = <
240+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x11059
241+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x11059
242+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x11059
243+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x11059
244+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x11059
245+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x11059
246+ >;
247+ };
248+
249+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
250+ fsl,pins = <
251+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170b9
252+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170b9
253+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170b9
254+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170b9
255+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170b9
256+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170b9
257+ >;
258+ };
259+
260+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
261+ fsl,pins = <
262+ MX6SLL_PAD_SD3_CMD__SD3_CMD 0x170f9
263+ MX6SLL_PAD_SD3_CLK__SD3_CLK 0x170f9
264+ MX6SLL_PAD_SD3_DATA0__SD3_DATA0 0x170f9
265+ MX6SLL_PAD_SD3_DATA1__SD3_DATA1 0x170f9
266+ MX6SLL_PAD_SD3_DATA2__SD3_DATA2 0x170f9
267+ MX6SLL_PAD_SD3_DATA3__SD3_DATA3 0x170f9
268+ >;
269+ };
270+
271+ pinctrl_usdhc3_sleep: usdhc3-sleepgrp {
272+ fsl,pins = <
273+ MX6SLL_PAD_SD3_CMD__GPIO5_IO21 0x100c1
274+ MX6SLL_PAD_SD3_CLK__GPIO5_IO18 0x100c1
275+ MX6SLL_PAD_SD3_DATA0__GPIO5_IO19 0x100c1
276+ MX6SLL_PAD_SD3_DATA1__GPIO5_IO20 0x100c1
277+ MX6SLL_PAD_SD3_DATA2__GPIO5_IO16 0x100c1
278+ MX6SLL_PAD_SD3_DATA3__GPIO5_IO17 0x100c1
279+ >;
280+ };
281+
282+ pinctrl_wifi_power: wifi-powergrp {
283+ fsl,pins = <
284+ MX6SLL_PAD_SD2_DATA6__GPIO4_IO29 0x10059 /* WIFI_3V3_ON */
285+ >;
286+ };
287+
288+ pinctrl_wifi_reset: wifi-resetgrp {
289+ fsl,pins = <
290+ MX6SLL_PAD_SD2_DATA7__GPIO5_IO00 0x10059 /* WIFI_RST */
291+ >;
292+ };
293+};
294+
295+&leds {
296+ pinctrl-names = "default";
297+ pinctrl-0 = <&pinctrl_led>;
298+};
299+
300+&lm3630a {
301+ pinctrl-names = "default";
302+ pinctrl-0 = <&pinctrl_lm3630a_bl_gpio>;
303+};
304+
305+&reg_wifi {
306+ pinctrl-names = "default";
307+ pinctrl-0 = <&pinctrl_wifi_power>;
308+};
309+
310+&ricoh619 {
311+ pinctrl-names = "default";
312+ pinctrl-0 = <&pinctrl_ricoh_gpio>;
313+};
314+
315+&uart1 {
316+ pinctrl-names = "default";
317+ pinctrl-0 = <&pinctrl_uart1>;
318+};
319+
320+&usdhc1 {
321+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
322+ pinctrl-0 = <&pinctrl_usdhc1>;
323+ pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
324+ pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
325+ pinctrl-3 = <&pinctrl_usdhc1_sleep>;
326+};
327+
328+&usdhc3 {
329+ pinctrl-names = "default", "state_100mhz", "state_200mhz","sleep";
330+ pinctrl-0 = <&pinctrl_usdhc3>;
331+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
332+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
333+ pinctrl-3 = <&pinctrl_usdhc3_sleep>;
334+};
335+
336+&wifi_pwrseq {
337+ pinctrl-names = "default";
338+ pinctrl-0 = <&pinctrl_wifi_reset>;
339+};
arch/arm/boot/dts/imx6sll.dtsi+10−12
@@ -51,20 +51,18 @@ · 50 unmodified lines
5151 device_type = "cpu";
5252 reg = <0>;
5353 next-level-cache = <&L2>;
54− operating-points = <
54+ operating-points =
5555 /* kHz uV */
56− 996000 1275000
57− 792000 1175000
58− 396000 1075000
59− 198000 975000
60− >;
61− fsl,soc-operating-points = <
56+ <996000 1275000>,
57+ <792000 1175000>,
58+ <396000 1075000>,
59+ <198000 975000>;
60+ fsl,soc-operating-points =
6261 /* ARM kHz SOC-PU uV */
63− 996000 1175000
64− 792000 1175000
65− 396000 1175000
66− 198000 1175000
67− >;
62+ <996000 1175000>,
63+ <792000 1175000>,
64+ <396000 1175000>,
65+ <198000 1175000>;
6866 clock-latency = <61036>; /* two CLK32 periods */
6967 #cooling-cells = <2>;
7068 clocks = <&clks IMX6SLL_CLK_ARM>,
arch/arm/boot/dts/imx6sx.dtsi+3−3
@@ -1395,15 +1395,15 @@ · 1394 unmodified lines
13951395 };
13961396
13971397 pcie: pcie@8ffc000 {
1398− compatible = "fsl,imx6sx-pcie", "snps,dw-pcie";
1398+ compatible = "fsl,imx6sx-pcie";
13991399 reg = <0x08ffc000 0x04000>, <0x08f00000 0x80000>;
14001400 reg-names = "dbi", "config";
14011401 #address-cells = <3>;
14021402 #size-cells = <2>;
14031403 device_type = "pci";
14041404 bus-range = <0x00 0xff>;
1405− ranges = <0x81000000 0 0 0x08f80000 0 0x00010000 /* downstream I/O */
1406− 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
1405+ ranges = <0x81000000 0 0 0x08f80000 0 0x00010000>, /* downstream I/O */
1406+ <0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; /* non-prefetchable memory */
14071407 num-lanes = <1>;
14081408 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
14091409 interrupt-names = "msi";
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi+11−1
@@ -68,8 +68,11 @@ · 67 unmodified lines
6868 };
6969
7070 &i2c1 {
71− pinctrl-names = "default";
71+ pinctrl-names = "default", "gpio";
7272 pinctrl-0 = <&pinctrl_i2c1>;
73+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
74+ scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
75+ sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
7376 clock-frequency = <100000>;
7477 status = "okay";
7578
@@ -147,6 +150,13 @@ · 71 unmodified lines
147150 >;
148151 };
149152
153+ pinctrl_i2c1_gpio: i2cgpiogrp {
154+ fsl,pins = <
155+ MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
156+ MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
157+ >;
158+ };
159+
150160 pinctrl_uart1: uart1grp {
151161 fsl,pins = <
152162 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
arch/arm/boot/dts/imx6ul-phytec-segin.dtsi+1−0
@@ -191,6 +191,7 @@ · 190 unmodified lines
191191 no-1-8-v;
192192 keep-power-in-suspend;
193193 wakeup-source;
194+ disable-wp;
194195 status = "disabled";
195196 };
196197
arch/arm/boot/dts/imx6ull-colibri-emmc-eval-v3.dts+17−0
@@ -0,0 +1,17 @@
1+// SPDX-License-Identifier: GPL-2.0+ OR MIT
2+/*
3+ * Copyright 2021 Toradex
4+ */
5+
6+/dts-v1/;
7+
8+#include "imx6ull-colibri-emmc-nonwifi.dtsi"
9+#include "imx6ull-colibri-eval-v3.dtsi"
10+
11+/ {
12+ model = "Toradex Colibri iMX6ULL 1GB (eMMC) on Colibri Evaluation Board V3";
13+ compatible = "toradex,colibri-imx6ull-emmc-eval",
14+ "toradex,colibri-imx6ull-emmc",
15+ "toradex,colibri-imx6ull",
16+ "fsl,imx6ull";
17+};
arch/arm/boot/dts/imx6ull-colibri-emmc-nonwifi.dtsi+185−0
@@ -0,0 +1,185 @@
1+// SPDX-License-Identifier: GPL-2.0+ OR MIT
2+/*
3+ * Copyright 2021 Toradex
4+ */
5+
6+#include "imx6ull-colibri.dtsi"
7+
8+/ {
9+ aliases {
10+ mmc0 = &usdhc2; /* eMMC */
11+ mmc1 = &usdhc1; /* MMC 4bit slot */
12+ };
13+
14+ memory@80000000 {
15+ device_type = "memory";
16+ reg = <0x80000000 0x10000000>;
17+ };
18+};
19+
20+&gpio1 {
21+ gpio-line-names = "SODIMM_8",
22+ "SODIMM_6",
23+ "SODIMM_129",
24+ "SODIMM_89",
25+ "SODIMM_19",
26+ "SODIMM_21",
27+ "UNUSABLE_SODIMM_180",
28+ "UNUSABLE_SODIMM_184",
29+ "SODIMM_4",
30+ "SODIMM_2",
31+ "SODIMM_106",
32+ "SODIMM_71",
33+ "SODIMM_23",
34+ "SODIMM_31",
35+ "SODIMM_99",
36+ "SODIMM_102",
37+ "SODIMM_33",
38+ "SODIMM_35",
39+ "SODIMM_25",
40+ "SODIMM_27",
41+ "SODIMM_36",
42+ "SODIMM_38",
43+ "SODIMM_32",
44+ "SODIMM_34",
45+ "SODIMM_135",
46+ "SODIMM_77",
47+ "SODIMM_100",
48+ "SODIMM_186",
49+ "SODIMM_196",
50+ "SODIMM_194";
51+};
52+
53+&gpio2 {
54+ gpio-line-names = "SODIMM_55",
55+ "SODIMM_63",
56+ "SODIMM_178",
57+ "SODIMM_188",
58+ "SODIMM_73",
59+ "SODIMM_30",
60+ "SODIMM_67",
61+ "SODIMM_104",
62+ "",
63+ "",
64+ "",
65+ "",
66+ "",
67+ "",
68+ "",
69+ "",
70+ "SODIMM_190",
71+ "SODIMM_47",
72+ "SODIMM_192",
73+ "SODIMM_49",
74+ "SODIMM_51",
75+ "SODIMM_53";
76+};
77+
78+&gpio3 {
79+ gpio-line-names = "SODIMM_56",
80+ "SODIMM_44",
81+ "SODIMM_68",
82+ "SODIMM_82",
83+ "",
84+ "SODIMM_76",
85+ "SODIMM_70",
86+ "SODIMM_60",
87+ "SODIMM_58",
88+ "SODIMM_78",
89+ "SODIMM_72",
90+ "SODIMM_80",
91+ "SODIMM_46",
92+ "SODIMM_62",
93+ "SODIMM_48",
94+ "SODIMM_74",
95+ "SODIMM_50",
96+ "SODIMM_52",
97+ "SODIMM_54",
98+ "SODIMM_66",
99+ "SODIMM_64",
100+ "SODIMM_57",
101+ "SODIMM_61",
102+ "SODIMM_29",
103+ "SODIMM_37",
104+ "SODIMM_88",
105+ "SODIMM_86",
106+ "SODIMM_92",
107+ "SODIMM_90";
108+};
109+
110+&gpio4 {
111+ gpio-line-names = "",
112+ "",
113+ "",
114+ "",
115+ "",
116+ "",
117+ "",
118+ "",
119+ "",
120+ "",
121+ "SODIMM_140",
122+ "SODIMM_59",
123+ "SODIMM_142",
124+ "SODIMM_144",
125+ "SODIMM_133",
126+ "SODIMM_146",
127+ "SODIMM_28",
128+ "SODIMM_75",
129+ "SODIMM_96",
130+ "SODIMM_81",
131+ "SODIMM_94",
132+ "SODIMM_101",
133+ "SODIMM_103",
134+ "SODIMM_79",
135+ "SODIMM_97",
136+ "SODIMM_69",
137+ "SODIMM_98",
138+ "SODIMM_85",
139+ "SODIMM_65";
140+};
141+
142+&gpio5 {
143+ gpio-line-names = "SODIMM_43",
144+ "SODIMM_45",
145+ "SODIMM_137",
146+ "SODIMM_95",
147+ "SODIMM_107",
148+ "SODIMM_131",
149+ "SODIMM_93",
150+ "",
151+ "SODIMM_138",
152+ "",
153+ "SODIMM_105",
154+ "SODIMM_127";
155+};
156+
157+&gpmi {
158+ status = "disabled";
159+};
160+
161+&iomuxc {
162+ pinctrl-names = "default";
163+ pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3
164+ &pinctrl_gpio4 &pinctrl_gpio6 &pinctrl_gpio7
165+ &pinctrl_gpmi_gpio>;
166+};
167+
168+&iomuxc_snvs {
169+ pinctrl-names = "default";
170+ pinctrl-0 = <&pinctrl_snvs_gpio1 &pinctrl_snvs_gpio3>;
171+};
172+
173+&usdhc2 {
174+ pinctrl-names = "default";
175+ pinctrl-0 = <&pinctrl_usdhc2emmc>;
176+ assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
177+ assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
178+ assigned-clock-rates = <0>, <198000000>;
179+ bus-width = <8>;
180+ keep-power-in-suspend;
181+ no-1-8-v;
182+ non-removable;
183+ vmmc-supply = <&reg_module_3v3>;
184+ status = "okay";
185+};
arch/arm/boot/dts/imx6ull-colibri.dtsi+30−2
@@ -1,6 +1,6 @@
1−// SPDX-License-Identifier: (GPL-2.0 OR MIT)
1+// SPDX-License-Identifier: GPL-2.0+ OR MIT
22 /*
3− * Copyright 2018 Toradex AG
3+ * Copyright 2018-2021 Toradex
44 */
55
66 #include "imx6ull.dtsi"
@@ -345,6 +345,19 @@ · 338 unmodified lines
345345 >;
346346 };
347347
348+ /*
349+ * With an eMMC instead of a raw NAND device the following pins
350+ * are available at SODIMM pins
351+ */
352+ pinctrl_gpmi_gpio: gpmi-gpio-grp {
353+ fsl,pins = <
354+ MX6UL_PAD_NAND_ALE__GPIO4_IO10 0x10b0 /* SODIMM 140 */
355+ MX6UL_PAD_NAND_CE0_B__GPIO4_IO13 0x10b0 /* SODIMM 144 */
356+ MX6UL_PAD_NAND_CLE__GPIO4_IO15 0x10b0 /* SODIMM 146 */
357+ MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x10b0 /* SODIMM 142 */
358+ >;
359+ };
360+
348361 pinctrl_gpmi_nand: gpmi-nand-grp {
349362 fsl,pins = <
350363 MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0x100a9
@@ -533,6 +546,21 @@ · 182 unmodified lines
533546 >;
534547 };
535548
549+ pinctrl_usdhc2emmc: usdhc2emmcgrp {
550+ fsl,pins = <
551+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17059
552+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x17059
553+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
554+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
555+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
556+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
557+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
558+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
559+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
560+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
561+ >;
562+ };
563+
536564 pinctrl_wdog: wdog-grp {
537565 fsl,pins = <
538566 MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY 0x30b0
arch/arm/boot/dts/imx7-mba7.dtsi+40−2
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Include file for TQ Systems MBa7 carrier board.
3+ * Device Tree Include file for TQ-Systems MBa7 carrier board.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 *
@@ -236,6 +236,44 @@ · 227 unmodified lines
236236 };
237237 };
238238
239+&flash0 {
240+ partitions {
241+ compatible = "fixed-partitions";
242+ #address-cells = <1>;
243+ #size-cells = <1>;
244+
245+ uboot@0 {
246+ label = "U-Boot";
247+ reg = <0x0 0xd0000>;
248+ };
249+
250+ env1@d0000 {
251+ label = "ENV1";
252+ reg = <0xd0000 0x10000>;
253+ };
254+
255+ env2@e0000 {
256+ label = "ENV2";
257+ reg = <0xe0000 0x10000>;
258+ };
259+
260+ dtb@f0000 {
261+ label = "DTB";
262+ reg = <0xf0000 0x10000>;
263+ };
264+
265+ linux@100000 {
266+ label = "Linux";
267+ reg = <0x100000 0x700000>;
268+ };
269+
270+ rootfs@800000 {
271+ label = "RootFS";
272+ reg = <0x800000 0x3800000>;
273+ };
274+ };
275+};
276+
239277 &flexcan1 {
240278 pinctrl-names = "default";
241279 pinctrl-0 = <&pinctrl_flexcan1>;
arch/arm/boot/dts/imx7-tqma7.dtsi+45−2
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Include file for TQ Systems TQMa7x boards with full mounted PCB.
3+ * Device Tree Include file for TQ-Systems TQMa7x boards with full mounted PCB.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 */
@@ -19,6 +19,16 @@ · 10 unmodified lines
1919 cpu-supply = <&sw1a_reg>;
2020 };
2121
22+&gpio2 {
23+ /* Configured as pullup by QSPI pin group */
24+ qspi-reset-hog {
25+ gpio-hog;
26+ gpios = <4 GPIO_ACTIVE_LOW>;
27+ input;
28+ line-name = "qspi-reset";
29+ };
30+};
31+
2232 &i2c1 {
2333 pinctrl-names = "default";
2434 pinctrl-0 = <&pinctrl_i2c1>;
@@ -160,6 +170,25 @@ · 135 unmodified lines
160170 >;
161171 };
162172
173+ pinctrl_qspi: qspigrp {
174+ fsl,pins = <
175+ MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 0x5A
176+ MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 0x5A
177+ MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 0x5A
178+ MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 0x5A
179+ MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK 0x11
180+ MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B 0x54
181+ MX7D_PAD_EPDC_DATA07__QSPI_A_SS1_B 0x54
182+ >;
183+ };
184+
185+ pinctrl_qspi_reset: qspi_resetgrp {
186+ fsl,pins = <
187+ /* #QSPI_RESET */
188+ MX7D_PAD_EPDC_DATA04__GPIO2_IO4 0x52
189+ >;
190+ };
191+
163192 pinctrl_usdhc3: usdhc3grp {
164193 fsl,pins = <
165194 MX7D_PAD_SD3_CMD__SD3_CMD 0x59
@@ -217,6 +246,20 @@ · 51 unmodified lines
217246 };
218247 };
219248
249+&qspi {
250+ pinctrl-names = "default";
251+ pinctrl-0 = <&pinctrl_qspi &pinctrl_qspi_reset>;
252+ status = "okay";
253+
254+ flash0: flash@0 {
255+ compatible = "jedec,spi-nor";
256+ reg = <0>;
257+ spi-max-frequency = <29000000>;
258+ spi-rx-bus-width = <4>;
259+ spi-tx-bus-width = <4>;
260+ };
261+};
262+
220263 &sdma {
221264 status = "okay";
222265 };
arch/arm/boot/dts/imx7d-mba7.dts+3−3
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Source for TQ Systems TQMa7D board on MBa7 carrier board.
3+ * Device Tree Source for TQ-Systems TQMa7D board on MBa7 carrier board.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 */
@@ -13,7 +13,7 @@ · 4 unmodified lines
1313 #include "imx7-mba7.dtsi"
1414
1515 / {
16− model = "TQ Systems TQMa7D board on MBa7 carrier board";
16+ model = "TQ-Systems TQMa7D board on MBa7 carrier board";
1717 compatible = "tq,imx7d-mba7", "tq,imx7d-tqma7", "fsl,imx7d";
1818 };
1919
arch/arm/boot/dts/imx7d-sdb.dts+1−1
@@ -45,7 +45,7 @@ · 44 unmodified lines
4545 pinctrl-0 = <&pinctrl_spi4>;
4646 gpio-sck = <&gpio1 13 GPIO_ACTIVE_HIGH>;
4747 gpio-mosi = <&gpio1 9 GPIO_ACTIVE_HIGH>;
48− cs-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
48+ cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
4949 num-chipselects = <1>;
5050 #address-cells = <1>;
5151 #size-cells = <0>;
arch/arm/boot/dts/imx7d-tqma7.dtsi+2−2
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Include file for TQ Systems TQMa7D board with NXP i.MX7Dual SoC.
3+ * Device Tree Include file for TQ-Systems TQMa7D board with NXP i.MX7Dual SoC.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 */
arch/arm/boot/dts/imx7d.dtsi+3−4
@@ -164,7 +164,7 @@ · 163 unmodified lines
164164 };
165165
166166 pcie: pcie@33800000 {
167− compatible = "fsl,imx7d-pcie", "snps,dw-pcie";
167+ compatible = "fsl,imx7d-pcie";
168168 reg = <0x33800000 0x4000>,
169169 <0x4ff00000 0x80000>;
170170 reg-names = "dbi", "config";
@@ -172,10 +172,9 @@ · 1 unmodified line
172172 #size-cells = <2>;
173173 device_type = "pci";
174174 bus-range = <0x00 0xff>;
175− ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000 /* downstream I/O */
176− 0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
175+ ranges = <0x81000000 0 0 0x4ff80000 0 0x00010000>, /* downstream I/O */
176+ <0x82000000 0 0x40000000 0x40000000 0 0x0ff00000>; /* non-prefetchable memory */
177177 num-lanes = <1>;
178− num-viewport = <4>;
179178 interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
180179 interrupt-names = "msi";
181180 #interrupt-cells = <1>;
arch/arm/boot/dts/imx7s-mba7.dts+3−3
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Source for TQ Systems TQMa7S board on MBa7 carrier board.
3+ * Device Tree Source for TQ-Systems TQMa7S board on MBa7 carrier board.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 */
@@ -13,6 +13,6 @@ · 4 unmodified lines
1313 #include "imx7-mba7.dtsi"
1414
1515 / {
16− model = "TQ Systems TQMa7S board on MBa7 carrier board";
16+ model = "TQ-Systems TQMa7S board on MBa7 carrier board";
1717 compatible = "tq,imx7s-mba7", "tq,imx7s-tqma7", "fsl,imx7s";
1818 };
arch/arm/boot/dts/imx7s-tqma7.dtsi+2−2
@@ -1,8 +1,8 @@
11 // SPDX-License-Identifier: GPL-2.0 OR X11
22 /*
3− * Device Tree Include file for TQ Systems TQMa7S board with NXP i.MX7Solo SoC.
3+ * Device Tree Include file for TQ-Systems TQMa7S board with NXP i.MX7Solo SoC.
44 *
5− * Copyright (C) 2016 TQ Systems GmbH
5+ * Copyright (C) 2016 TQ-Systems GmbH
66 * Author: Markus Niebel <Markus.Niebel@tq-group.com>
77 * Copyright (C) 2019 Bruno Thomsen <bruno.thomsen@gmail.com>
88 */
arch/arm/boot/dts/integrator.dtsi+17−6
@@ -15,10 +15,14 @@ · 14 unmodified lines
1515 core-module@10000000 {
1616 compatible = "arm,core-module-integrator", "syscon", "simple-mfd";
1717 reg = <0x10000000 0x200>;
18+ ranges = <0x0 0x10000000 0x200>;
19+ #address-cells = <1>;
20+ #size-cells = <1>;
1821
1922 /* Use core module LED to indicate CPU load */
20− led@c.0 {
23+ led@c,0 {
2124 compatible = "register-bit-led";
25+ reg = <0x0c 0x04>;
2226 offset = <0x0c>;
2327 mask = <0x01>;
2428 label = "integrator:core_module";
@@ -104,35 +108,42 @@ · 79 unmodified lines
104108 interrupts = <4>;
105109 };
106110
107− syscon {
111+ syscon@1a000000 {
108112 /* Debug registers mapped as syscon */
109113 compatible = "syscon", "simple-mfd";
110114 reg = <0x1a000000 0x10>;
115+ ranges = <0x0 0x1a000000 0x10>;
116+ #address-cells = <1>;
117+ #size-cells = <1>;
111118
112− led@4.0 {
119+ led@4,0 {
113120 compatible = "register-bit-led";
121+ reg = <0x04 0x04>;
114122 offset = <0x04>;
115123 mask = <0x01>;
116124 label = "integrator:green0";
117125 linux,default-trigger = "heartbeat";
118126 default-state = "on";
119127 };
120− led@4.1 {
128+ led@4,1 {
121129 compatible = "register-bit-led";
130+ reg = <0x04 0x04>;
122131 offset = <0x04>;
123132 mask = <0x02>;
124133 label = "integrator:yellow";
125134 default-state = "off";
126135 };
127− led@4.2 {
136+ led@4,2 {
128137 compatible = "register-bit-led";
138+ reg = <0x04 0x04>;
129139 offset = <0x04>;
130140 mask = <0x04>;
131141 label = "integrator:red";
132142 default-state = "off";
133143 };
134− led@4.3 {
144+ led@4,3 {
135145 compatible = "register-bit-led";
146+ reg = <0x04 0x04>;
136147 offset = <0x04>;
137148 mask = <0x08>;
138149 label = "integrator:green1";
arch/arm/boot/dts/integratorap-im-pd1.dts+7−2
@@ -28,9 +28,13 @@ · 27 unmodified lines
2828 syscon@0 {
2929 compatible = "arm,im-pd1-syscon", "syscon";
3030 reg = <0x00000000 0x1000>;
31+ ranges;
32+ #address-cells = <1>;
33+ #size-cells = <1>;
3134
32− vco1: vco1-clock {
35+ vco1: clock-controller@0 {
3336 compatible = "arm,impd1-vco1";
37+ reg = <0x00 0x04>;
3438 #clock-cells = <0>;
3539 lock-offset = <0x08>;
3640 vco-offset = <0x00>;
@@ -38,8 +42,9 @@ · 1 unmodified line
3842 clock-output-names = "IM-PD1-VCO1";
3943 };
4044
41− vco2: vco2-clock {
45+ vco2: clock-controller@4 {
4246 compatible = "arm,impd1-vco2";
47+ reg = <0x04 0x04>;
4348 #clock-cells = <0>;
4449 lock-offset = <0x08>;
4550 vco-offset = <0x04>;
arch/arm/boot/dts/integratorap.dts+11−4
@@ -88,8 +88,9 @@ · 87 unmodified lines
8888 };
8989
9090 /* Oscillator on the core module, clocks the CPU core */
91− cmosc: cmosc@24M {
91+ cmosc: clock-controller@8 {
9292 compatible = "arm,syscon-icst525-integratorap-cm";
93+ reg = <0x08 0x04>;
9394 #clock-cells = <0>;
9495 lock-offset = <0x14>;
9596 vco-offset = <0x08>;
@@ -97,8 +98,9 @@ · 1 unmodified line
9798 };
9899
99100 /* Auxilary oscillator on the core module, 32.369MHz at boot */
100− auxosc: auxosc@24M {
101+ auxosc: clock-controller@1c {
101102 compatible = "arm,syscon-icst525";
103+ reg = <0x1c 0x04>;
102104 #clock-cells = <0>;
103105 lock-offset = <0x14>;
104106 vco-offset = <0x1c>;
@@ -109,13 +111,17 @@ · 4 unmodified lines
109111 syscon {
110112 compatible = "arm,integrator-ap-syscon", "syscon";
111113 reg = <0x11000000 0x100>;
114+ ranges = <0x0 0x11000000 0x100>;
115+ #size-cells = <1>;
116+ #address-cells = <1>;
112117
113118 /*
114119 * SYSCLK clocks PCIv3 bridge, system controller and the
115120 * logic modules.
116121 */
117− sysclk: apsys@24M {
122+ sysclk: clock-controller@4 {
118123 compatible = "arm,syscon-icst525-integratorap-sys";
124+ reg = <0x04 0x04>;
119125 #clock-cells = <0>;
120126 lock-offset = <0x1c>;
121127 vco-offset = <0x04>;
@@ -123,8 +129,9 @@ · 1 unmodified line
123129 };
124130
125131 /* One-bit control for the PCI bus clock (33 or 25 MHz) */
126− pciclk: pciclk@24M {
132+ pciclk: clock-controller@4,8 {
127133 compatible = "arm,syscon-icst525-integratorap-pci";
134+ reg = <0x04 0x04>;
128135 #clock-cells = <0>;
129136 lock-offset = <0x1c>;
130137 vco-offset = <0x04>;
arch/arm/boot/dts/integratorcp.dts+6−3
@@ -92,8 +92,9 @@ · 91 unmodified lines
9292 };
9393
9494 /* Oscillator on the core module, clocks the CPU core */
95− cmcore: cmosc@24M {
95+ cmcore: clock-controller@8 {
9696 compatible = "arm,syscon-icst525-integratorcp-cm-core";
97+ reg = <0x08 0x04>;
9798 #clock-cells = <0>;
9899 lock-offset = <0x14>;
99100 vco-offset = <0x08>;
@@ -101,8 +102,9 @@ · 1 unmodified line
101102 };
102103
103104 /* Oscillator on the core module, clocks the memory bus */
104− cmmem: cmosc@24M {
105+ cmmem: clock-controller@8,12 {
105106 compatible = "arm,syscon-icst525-integratorcp-cm-mem";
107+ reg = <0x08 0x04>;
106108 #clock-cells = <0>;
107109 lock-offset = <0x14>;
108110 vco-offset = <0x08>;
@@ -110,8 +112,9 @@ · 1 unmodified line
110112 };
111113
112114 /* Auxilary oscillator on the core module, clocks the CLCD */
113− auxosc: auxosc@24M {
115+ auxosc: clock-controller@1c {
114116 compatible = "arm,syscon-icst525";
117+ reg = <0x1c 0x04>;
115118 #clock-cells = <0>;
116119 lock-offset = <0x14>;
117120 vco-offset = <0x1c>;
arch/arm/boot/dts/intel-ixp42x-adi-coyote.dts+2−0
@@ -63,6 +63,8 @@ · 62 unmodified lines
6363 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
6464 * each handling all IRQs.
6565 */
66+ #interrupt-cells = <1>;
67+ interrupt-map-mask = <0xf800 0 0 7>;
6668 interrupt-map =
6769 /* IDSEL 1 */
6870 <0x0800 0 0 1 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 6 */
arch/arm/boot/dts/intel-ixp42x-arcom-vulcan.dts+2−0
@@ -120,6 +120,8 @@ · 119 unmodified lines
120120 * We have 2 slots (IDSEL) 1 and 2 with one dedicated interrupt
121121 * per slot. This interrupt is shared (OR:ed) by all four pins.
122122 */
123+ #interrupt-cells = <1>;
124+ interrupt-map-mask = <0xf800 0 0 7>;
123125 interrupt-map =
124126 /* IDSEL 1 */
125127 <0x0800 0 0 1 &gpio0 2 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 2 */
arch/arm/boot/dts/intel-ixp42x-dlink-dsm-g600.dts+2−0
@@ -129,6 +129,8 @@ · 128 unmodified lines
129129 * We have slots (IDSEL) 1, 2, 3, 4 and pins 1, 2 and 3.
130130 * Only slot 3 have three IRQs.
131131 */
132+ #interrupt-cells = <1>;
133+ interrupt-map-mask = <0xf800 0 0 7>;
132134 interrupt-map =
133135 /* IDSEL 1 */
134136 <0x0800 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT E on slot 1 is irq 7 */
arch/arm/boot/dts/intel-ixp42x-freecom-fsg-3.dts+2−0
@@ -106,6 +106,8 @@ · 105 unmodified lines
106106 * Written based on the FSG-3 PCI boardfile.
107107 * We have slots 12, 13 & 14 (IDSEL) with one IRQ each.
108108 */
109+ #interrupt-cells = <1>;
110+ interrupt-map-mask = <0xf800 0 0 7>;
109111 interrupt-map =
110112 /* IDSEL 12 */
111113 <0x6000 0 0 1 &gpio0 5 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 5 */
arch/arm/boot/dts/intel-ixp42x-gateworks-gw2348.dts+2−0
@@ -115,6 +115,8 @@ · 114 unmodified lines
115115 *
116116 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
117117 */
118+ #interrupt-cells = <1>;
119+ interrupt-map-mask = <0xf800 0 0 7>;
118120 interrupt-map =
119121 /* IDSEL 1 */
120122 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-iomega-nas100d.dts+2−0
@@ -115,6 +115,8 @@ · 114 unmodified lines
115115 * Taken from NAS 100D PCI boardfile (nas100d-pci.c)
116116 * We have slots (IDSEL) 1, 2 and 3 and pins 1, 2 and 3.
117117 */
118+ #interrupt-cells = <1>;
119+ interrupt-map-mask = <0xf800 0 0 7>;
118120 interrupt-map =
119121 /* IDSEL 1 */
120122 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-ixdpg425.dts+2−0
@@ -68,6 +68,8 @@ · 67 unmodified lines
6868 * We have slots (IDSEL) 12, 13 and 14 with one assigned IRQ
6969 * for 12 & 13 and one for 14.
7070 */
71+ #interrupt-cells = <1>;
72+ interrupt-map-mask = <0xf800 0 0 7>;
7173 interrupt-map =
7274 /* IDSEL 12 */
7375 <0x6000 0 0 1 &gpio0 7 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 12 is irq 7 */
arch/arm/boot/dts/intel-ixp42x-linksys-nslu2.dts+2−0
@@ -122,6 +122,8 @@ · 121 unmodified lines
122122 * Taken from NSLU2 PCI boardfile, INT A, B, C swizzled D constant
123123 * We have slots (IDSEL) 1, 2 and 3.
124124 */
125+ #interrupt-cells = <1>;
126+ interrupt-map-mask = <0xf800 0 0 7>;
125127 interrupt-map =
126128 /* IDSEL 1 */
127129 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp42x-linksys-wrv54g.dts+2−0
@@ -123,6 +123,8 @@ · 122 unmodified lines
123123 * We have up to 2 slots (IDSEL) with 2 swizzled IRQs.
124124 * Derived from the GTWX5715 PCI boardfile.
125125 */
126+ #interrupt-cells = <1>;
127+ interrupt-map-mask = <0xf800 0 0 7>;
126128 interrupt-map =
127129 /* IDSEL 0 */
128130 <0x0000 0 0 1 &gpio0 10 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 0 is irq 10 */
arch/arm/boot/dts/intel-ixp42x-netgear-wg302v2.dts+2−0
@@ -62,6 +62,8 @@ · 61 unmodified lines
6262 * We have slots (IDSEL) 1 and 2 with one assigned IRQ
6363 * each handling all IRQs.
6464 */
65+ #interrupt-cells = <1>;
66+ interrupt-map-mask = <0xf800 0 0 7>;
6567 interrupt-map =
6668 /* IDSEL 1 */
6769 <0x0800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 8 */
arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts+2−0
@@ -131,6 +131,8 @@ · 130 unmodified lines
131131 * have instead assumed that they are rotated (swizzled) like
132132 * this with 11, 10, 9, 8 for the 4 pins on IDSEL 1 etc.
133133 */
134+ #interrupt-cells = <1>;
135+ interrupt-map-mask = <0xf800 0 0 7>;
134136 interrupt-map =
135137 /* IDSEL 1 */
136138 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp45x-ixp46x.dtsi+8−0
@@ -74,5 +74,13 @@ · 73 unmodified lines
7474 queue-rx = <&qmgr 0>;
7575 queue-txready = <&qmgr 0>;
7676 };
77+
78+ ptp-timer@c8010000 {
79+ compatible = "intel,ixp46x-ptp-timer";
80+ reg = <0xc8010000 0x1000>;
81+ interrupt-parent = <&gpio0>;
82+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>, <7 IRQ_TYPE_EDGE_FALLING>;
83+ interrupt-names = "master", "slave";
84+ };
7785 };
7886 };
arch/arm/boot/dts/intel-ixp4xx-reference-design.dtsi+2−0
@@ -106,6 +106,8 @@ · 105 unmodified lines
106106 * PCI slots on the BIXMB425BD base card.
107107 * We have up to 4 slots (IDSEL) with 4 swizzled IRQs.
108108 */
109+ #interrupt-cells = <1>;
110+ interrupt-map-mask = <0xf800 0 0 7>;
109111 interrupt-map =
110112 /* IDSEL 1 */
111113 <0x0800 0 0 1 &gpio0 11 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 1 is irq 11 */
arch/arm/boot/dts/intel-ixp4xx.dtsi+0−2
@@ -78,8 +78,6 @@ · 77 unmodified lines
7878 dma-ranges =
7979 <0x02000000 0 0x00000000 0x00000000 0 0x04000000>;
8080
81− #interrupt-cells = <1>;
82− interrupt-map-mask = <0xf800 0 0 7>;
8381 /* Each unique DTS using PCI must specify the swizzling */
8482 };
8583
arch/arm/boot/dts/iwg20d-q7-common.dtsi+2−0
@@ -158,6 +158,8 @@ · 157 unmodified lines
158158 status = "okay";
159159
160160 phy3: ethernet-phy@3 {
161+ compatible = "ethernet-phy-id0022.1622",
162+ "ethernet-phy-ieee802.3-c22";
161163 reg = <3>;
162164 micrel,led-mode = <1>;
163165 };
arch/arm/boot/dts/ls1021a-qds.dts+25−60
@@ -1,49 +1,7 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
12 /*
23 * Copyright 2013-2014 Freescale Semiconductor, Inc.
34 * Copyright 2018 NXP
4− *
5− * This file is dual-licensed: you can use it either under the terms
6− * of the GPL or the X11 license, at your option. Note that this dual
7− * licensing only applies to this file, and not this project as a
8− * whole.
9− *
10− * a) This file is free software; you can redistribute it and/or
11− * modify it under the terms of the GNU General Public License as
12− * published by the Free Software Foundation; either version 2 of
13− * the License, or (at your option) any later version.
14− *
15− * This file is distributed in the hope that it will be useful,
16− * but WITHOUT ANY WARRANTY; without even the implied warranty of
17− * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18− * GNU General Public License for more details.
19− *
20− * You should have received a copy of the GNU General Public
21− * License along with this file; if not, write to the Free
22− * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
23− * MA 02110-1301 USA
24− *
25− * Or, alternatively,
26− *
27− * b) Permission is hereby granted, free of charge, to any person
28− * obtaining a copy of this software and associated documentation
29− * files (the "Software"), to deal in the Software without
30− * restriction, including without limitation the rights to use,
31− * copy, modify, merge, publish, distribute, sublicense, and/or
32− * sell copies of the Software, and to permit persons to whom the
33− * Software is furnished to do so, subject to the following
34− * conditions:
35− *
36− * The above copyright notice and this permission notice shall be
37− * included in all copies or substantial portions of the Software.
38− *
39− * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40− * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41− * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42− * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43− * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44− * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45− * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46− * OTHER DEALINGS IN THE SOFTWARE.
475 */
486
497 /dts-v1/;
@@ -67,19 +25,12 @@ · 17 unmodified lines
6725 clock-frequency = <24576000>;
6826 };
6927
70− regulators {
71− compatible = "simple-bus";
72− #address-cells = <1>;
73− #size-cells = <0>;
74−
75− reg_3p3v: regulator@0 {
76− compatible = "regulator-fixed";
77− reg = <0>;
78− regulator-name = "3P3V";
79− regulator-min-microvolt = <3300000>;
80− regulator-max-microvolt = <3300000>;
81− regulator-always-on;
82− };
28+ reg_3p3v: regulator {
29+ compatible = "regulator-fixed";
30+ regulator-name = "3P3V";
31+ regulator-min-microvolt = <3300000>;
32+ regulator-max-microvolt = <3300000>;
33+ regulator-always-on;
8334 };
8435
8536 sound {
@@ -231,9 +182,9 @@ · 145 unmodified lines
231182 #address-cells = <2>;
232183 #size-cells = <1>;
233184 /* NOR, NAND Flashes and FPGA on board */
234− ranges = <0x0 0x0 0x0 0x60000000 0x08000000
235− 0x2 0x0 0x0 0x7e800000 0x00010000
236− 0x3 0x0 0x0 0x7fb00000 0x00000100>;
185+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000>,
186+ <0x2 0x0 0x0 0x7e800000 0x00010000>,
187+ <0x3 0x0 0x0 0x7fb00000 0x00000100>;
237188 status = "okay";
238189
239190 nor@0,0 {
@@ -254,7 +205,7 @@ · 14 unmodified lines
254205 fpga: board-control@3,0 {
255206 #address-cells = <1>;
256207 #size-cells = <1>;
257− compatible = "simple-bus";
208+ compatible = "simple-mfd";
258209 reg = <0x3 0x0 0x0000100>;
259210 bank-width = <1>;
260211 device-width = <1>;
@@ -328,6 +279,20 @@ · 67 unmodified lines
328279 };
329280 };
330281
282+&qspi {
283+ status = "okay";
284+
285+ flash@0 {
286+ compatible = "jedec,spi-nor";
287+ #address-cells = <1>;
288+ #size-cells = <1>;
289+ spi-max-frequency = <20000000>;
290+ reg = <0>;
291+ spi-rx-bus-width = <4>;
292+ spi-tx-bus-width = <4>;
293+ };
294+};
295+
331296 &sai2 {
332297 status = "okay";
333298 };
arch/arm/boot/dts/ls1021a-tsn.dts+2−2
@@ -8,6 +8,7 @@ · 7 unmodified lines
88
99 / {
1010 model = "NXP LS1021A-TSN Board";
11+ compatible = "fsl,ls1021a-tsn", "fsl,ls1021a";
1112
1213 sys_mclk: clock-mclk {
1314 compatible = "fixed-clock";
@@ -136,7 +137,6 @@ · 122 unmodified lines
136137 /* 3 axis accelerometer */
137138 accelerometer@1e {
138139 compatible = "fsl,fxls8471";
139− position = <0>;
140140 reg = <0x1e>;
141141 };
142142
@@ -251,7 +251,7 @@ · 108 unmodified lines
251251
252252 flash@0 {
253253 /* Rev. A uses 64MB flash, Rev. B & C use 32MB flash */
254− compatible = "jedec,spi-nor", "s25fl256s1", "s25fl512s";
254+ compatible = "jedec,spi-nor";
255255 spi-max-frequency = <20000000>;
256256 #address-cells = <1>;
257257 #size-cells = <1>;
arch/arm/boot/dts/ls1021a-twr.dts+7−56
@@ -1,49 +1,7 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
12 /*
23 * Copyright 2013-2014 Freescale Semiconductor, Inc.
34 * Copyright 2018 NXP
4− *
5− * This file is dual-licensed: you can use it either under the terms
6− * of the GPL or the X11 license, at your option. Note that this dual
7− * licensing only applies to this file, and not this project as a
8− * whole.
9− *
10− * a) This file is free software; you can redistribute it and/or
11− * modify it under the terms of the GNU General Public License as
12− * published by the Free Software Foundation; either version 2 of
13− * the License, or (at your option) any later version.
14− *
15− * This file is distributed in the hope that it will be useful,
16− * but WITHOUT ANY WARRANTY; without even the implied warranty of
17− * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18− * GNU General Public License for more details.
19− *
20− * You should have received a copy of the GNU General Public
21− * License along with this file; if not, write to the Free
22− * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
23− * MA 02110-1301 USA
24− *
25− * Or, alternatively,
26− *
27− * b) Permission is hereby granted, free of charge, to any person
28− * obtaining a copy of this software and associated documentation
29− * files (the "Software"), to deal in the Software without
30− * restriction, including without limitation the rights to use,
31− * copy, modify, merge, publish, distribute, sublicense, and/or
32− * sell copies of the Software, and to permit persons to whom the
33− * Software is furnished to do so, subject to the following
34− * conditions:
35− *
36− * The above copyright notice and this permission notice shall be
37− * included in all copies or substantial portions of the Software.
38− *
39− * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
40− * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41− * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42− * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43− * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
44− * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45− * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46− * OTHER DEALINGS IN THE SOFTWARE.
475 */
486
497 /dts-v1/;
@@ -65,19 +23,12 @@ · 15 unmodified lines
6523 clock-frequency = <24576000>;
6624 };
6725
68− regulators {
69− compatible = "simple-bus";
70− #address-cells = <1>;
71− #size-cells = <0>;
72−
73− reg_3p3v: regulator@0 {
74− compatible = "regulator-fixed";
75− reg = <0>;
76− regulator-name = "3P3V";
77− regulator-min-microvolt = <3300000>;
78− regulator-max-microvolt = <3300000>;
79− regulator-always-on;
80− };
26+ reg_3p3v: regulator {
27+ compatible = "regulator-fixed";
28+ regulator-name = "3P3V";
29+ regulator-min-microvolt = <3300000>;
30+ regulator-max-microvolt = <3300000>;
31+ regulator-always-on;
8132 };
8233
8334 sound {
arch/arm/boot/dts/ls1021a.dtsi+88−131
@@ -1,48 +1,6 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
12 /*
23 * Copyright 2013-2014 Freescale Semiconductor, Inc.
3− *
4− * This file is dual-licensed: you can use it either under the terms
5− * of the GPL or the X11 license, at your option. Note that this dual
6− * licensing only applies to this file, and not this project as a
7− * whole.
8− *
9− * a) This file is free software; you can redistribute it and/or
10− * modify it under the terms of the GNU General Public License as
11− * published by the Free Software Foundation; either version 2 of
12− * the License, or (at your option) any later version.
13− *
14− * This file is distributed in the hope that it will be useful,
15− * but WITHOUT ANY WARRANTY; without even the implied warranty of
16− * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17− * GNU General Public License for more details.
18− *
19− * You should have received a copy of the GNU General Public
20− * License along with this file; if not, write to the Free
21− * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22− * MA 02110-1301 USA
23− *
24− * Or, alternatively,
25− *
26− * b) Permission is hereby granted, free of charge, to any person
27− * obtaining a copy of this software and associated documentation
28− * files (the "Software"), to deal in the Software without
29− * restriction, including without limitation the rights to use,
30− * copy, modify, merge, publish, distribute, sublicense, and/or
31− * sell copies of the Software, and to permit persons to whom the
32− * Software is furnished to do so, subject to the following
33− * conditions:
34− *
35− * The above copyright notice and this permission notice shall be
36− * included in all copies or substantial portions of the Software.
37− *
38− * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39− * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40− * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41− * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42− * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43− * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44− * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45− * OTHER DEALINGS IN THE SOFTWARE.
464 */
475
486 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -51,7 +9,6 @@ · 2 unmodified lines
519 / {
5210 #address-cells = <2>;
5311 #size-cells = <2>;
54− compatible = "fsl,ls1021a";
5512 interrupt-parent = <&gic>;
5613
5714 aliases {
@@ -90,7 +47,7 @@ · 32 unmodified lines
9047 };
9148 };
9249
93− memory {
50+ memory@0 {
9451 device_type = "memory";
9552 reg = <0x0 0x0 0x0 0x0>;
9653 };
@@ -169,6 +126,7 @@ · 72 unmodified lines
169126 compatible = "fsl,ifc", "simple-bus";
170127 reg = <0x0 0x1530000 0x0 0x10000>;
171128 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
129+ status = "disabled";
172130 };
173131
174132 dcfg: dcfg@1ee0000 {
@@ -290,78 +248,45 @@ · 115 unmodified lines
290248 reg = <0x0 0x1f00000 0x0 0x10000>;
291249 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
292250 fsl,tmu-range = <0xb0000 0x9002c 0x6004e 0x30066>;
293− fsl,tmu-calibration = <0x00000000 0x00000020
294− 0x00000001 0x00000024
295− 0x00000002 0x0000002a
296− 0x00000003 0x00000032
297− 0x00000004 0x00000038
298− 0x00000005 0x0000003e
299− 0x00000006 0x00000043
300− 0x00000007 0x0000004a
301− 0x00000008 0x00000050
302− 0x00000009 0x00000059
303− 0x0000000a 0x0000005f
304− 0x0000000b 0x00000066
305−
306− 0x00010000 0x00000023
307− 0x00010001 0x0000002b
308− 0x00010002 0x00000033
309− 0x00010003 0x0000003a
310− 0x00010004 0x00000042
311− 0x00010005 0x0000004a
312− 0x00010006 0x00000054
313− 0x00010007 0x0000005c
314− 0x00010008 0x00000065
315− 0x00010009 0x0000006f
316−
317− 0x00020000 0x00000029
318− 0x00020001 0x00000033
319− 0x00020002 0x0000003d
320− 0x00020003 0x00000048
321− 0x00020004 0x00000054
322− 0x00020005 0x00000060
323− 0x00020006 0x0000006c
324−
325− 0x00030000 0x00000025
326− 0x00030001 0x00000033
327− 0x00030002 0x00000043
328− 0x00030003 0x00000055>;
251+ fsl,tmu-calibration = <0x00000000 0x00000020>,
252+ <0x00000001 0x00000024>,
253+ <0x00000002 0x0000002a>,
254+ <0x00000003 0x00000032>,
255+ <0x00000004 0x00000038>,
256+ <0x00000005 0x0000003e>,
257+ <0x00000006 0x00000043>,
258+ <0x00000007 0x0000004a>,
259+ <0x00000008 0x00000050>,
260+ <0x00000009 0x00000059>,
261+ <0x0000000a 0x0000005f>,
262+ <0x0000000b 0x00000066>,
263+
264+ <0x00010000 0x00000023>,
265+ <0x00010001 0x0000002b>,
266+ <0x00010002 0x00000033>,
267+ <0x00010003 0x0000003a>,
268+ <0x00010004 0x00000042>,
269+ <0x00010005 0x0000004a>,
270+ <0x00010006 0x00000054>,
271+ <0x00010007 0x0000005c>,
272+ <0x00010008 0x00000065>,
273+ <0x00010009 0x0000006f>,
274+
275+ <0x00020000 0x00000029>,
276+ <0x00020001 0x00000033>,
277+ <0x00020002 0x0000003d>,
278+ <0x00020003 0x00000048>,
279+ <0x00020004 0x00000054>,
280+ <0x00020005 0x00000060>,
281+ <0x00020006 0x0000006c>,
282+
283+ <0x00030000 0x00000025>,
284+ <0x00030001 0x00000033>,
285+ <0x00030002 0x00000043>,
286+ <0x00030003 0x00000055>;
329287 #thermal-sensor-cells = <1>;
330288 };
331289
332− thermal-zones {
333− cpu_thermal: cpu-thermal {
334− polling-delay-passive = <1000>;
335− polling-delay = <5000>;
336−
337− thermal-sensors = <&tmu 0>;
338−
339− trips {
340− cpu_alert: cpu-alert {
341− temperature = <85000>;
342− hysteresis = <2000>;
343− type = "passive";
344− };
345− cpu_crit: cpu-crit {
346− temperature = <95000>;
347− hysteresis = <2000>;
348− type = "critical";
349− };
350− };
351−
352− cooling-maps {
353− map0 {
354− trip = <&cpu_alert>;
355− cooling-device =
356− <&cpu0 THERMAL_NO_LIMIT
357− THERMAL_NO_LIMIT>,
358− <&cpu1 THERMAL_NO_LIMIT
359− THERMAL_NO_LIMIT>;
360− };
361− };
362− };
363− };
364−
365290 dspi0: spi@2100000 {
366291 compatible = "fsl,ls1021a-v1.0-dspi";
367292 #address-cells = <1>;
@@ -394,10 +319,9 @@ · 26 unmodified lines
394319 #size-cells = <0>;
395320 reg = <0x0 0x2180000 0x0 0x10000>;
396321 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
397− clock-names = "i2c";
398322 clocks = <&clockgen 4 1>;
399− dma-names = "tx", "rx";
400− dmas = <&edma0 1 39>, <&edma0 1 38>;
323+ dma-names = "rx", "tx";
324+ dmas = <&edma0 1 38>, <&edma0 1 39>;
401325 status = "disabled";
402326 };
403327
@@ -407,10 +331,9 @@ · 3 unmodified lines
407331 #size-cells = <0>;
408332 reg = <0x0 0x2190000 0x0 0x10000>;
409333 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
410− clock-names = "i2c";
411334 clocks = <&clockgen 4 1>;
412− dma-names = "tx", "rx";
413− dmas = <&edma0 1 37>, <&edma0 1 36>;
335+ dma-names = "rx", "tx";
336+ dmas = <&edma0 1 36>, <&edma0 1 37>;
414337 status = "disabled";
415338 };
416339
@@ -420,10 +343,9 @@ · 3 unmodified lines
420343 #size-cells = <0>;
421344 reg = <0x0 0x21a0000 0x0 0x10000>;
422345 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
423− clock-names = "i2c";
424346 clocks = <&clockgen 4 1>;
425− dma-names = "tx", "rx";
426− dmas = <&edma0 1 35>, <&edma0 1 34>;
347+ dma-names = "rx", "tx";
348+ dmas = <&edma0 1 34>, <&edma0 1 35>;
427349 status = "disabled";
428350 };
429351
@@ -884,8 +806,8 @@ · 454 unmodified lines
884806
885807 pcie@3400000 {
886808 compatible = "fsl,ls1021a-pcie";
887− reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
888− 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
809+ reg = <0x00 0x03400000 0x0 0x00010000>, /* controller registers */
810+ <0x40 0x00000000 0x0 0x00002000>; /* configuration space */
889811 reg-names = "regs", "config";
890812 interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
891813 fsl,pcie-scfg = <&scfg 0>;
@@ -894,8 +816,8 @@ · 2 unmodified lines
894816 device_type = "pci";
895817 num-viewport = <6>;
896818 bus-range = <0x0 0xff>;
897− ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
898− 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
819+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000>, /* downstream I/O */
820+ <0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
899821 msi-parent = <&msi1>, <&msi2>;
900822 #interrupt-cells = <1>;
901823 interrupt-map-mask = <0 0 0 7>;
@@ -908,8 +830,8 @@ · 6 unmodified lines
908830
909831 pcie@3500000 {
910832 compatible = "fsl,ls1021a-pcie";
911− reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */
912− 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
833+ reg = <0x00 0x03500000 0x0 0x00010000>, /* controller registers */
834+ <0x48 0x00000000 0x0 0x00002000>; /* configuration space */
913835 reg-names = "regs", "config";
914836 interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
915837 fsl,pcie-scfg = <&scfg 1>;
@@ -918,8 +840,8 @@ · 2 unmodified lines
918840 device_type = "pci";
919841 num-viewport = <6>;
920842 bus-range = <0x0 0xff>;
921− ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
922− 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
843+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000>, /* downstream I/O */
844+ <0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
923845 msi-parent = <&msi1>, <&msi2>;
924846 #interrupt-cells = <1>;
925847 interrupt-map-mask = <0 0 0 7>;
@@ -992,6 +914,7 @@ · 66 unmodified lines
992914 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
993915 interrupt-names = "qdma-error",
994916 "qdma-queue0", "qdma-queue1";
917+ #dma-cells = <2>;
995918 dma-channels = <8>;
996919 block-number = <1>;
997920 block-offset = <0x1000>;
@@ -1005,6 +928,7 @@ · 7 unmodified lines
1005928 compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
1006929 reg = <0x0 0x1ee2140 0x0 0x8>;
1007930 #fsl,rcpm-wakeup-cells = <2>;
931+ #power-domain-cells = <0>;
1008932 };
1009933
1010934 ftm_alarm0: timer0@29d0000 {
@@ -1016,4 +940,37 @@ · 5 unmodified lines
1016940 big-endian;
1017941 };
1018942 };
943+
944+ thermal-zones {
945+ cpu_thermal: cpu-thermal {
946+ polling-delay-passive = <1000>;
947+ polling-delay = <5000>;
948+
949+ thermal-sensors = <&tmu 0>;
950+
951+ trips {
952+ cpu_alert: cpu-alert {
953+ temperature = <85000>;
954+ hysteresis = <2000>;
955+ type = "passive";
956+ };
957+ cpu_crit: cpu-crit {
958+ temperature = <95000>;
959+ hysteresis = <2000>;
960+ type = "critical";
961+ };
962+ };
963+
964+ cooling-maps {
965+ map0 {
966+ trip = <&cpu_alert>;
967+ cooling-device =
968+ <&cpu0 THERMAL_NO_LIMIT
969+ THERMAL_NO_LIMIT>,
970+ <&cpu1 THERMAL_NO_LIMIT
971+ THERMAL_NO_LIMIT>;
972+ };
973+ };
974+ };
975+ };
1019976 };
arch/arm/boot/dts/mps2.dtsi+8−2
@@ -216,8 +216,13 @@ · 215 unmodified lines
216216 compatible = "syscon", "simple-mfd";
217217 reg = <0x8000 0x10>;
218218
219− led0 {
219+ ranges = <0x0 0x8000 0x10>;
220+ #address-cells = <1>;
221+ #size-cells = <1>;
222+
223+ led@0,0 {
220224 compatible = "register-bit-led";
225+ reg = <0x00 0x04>;
221226 offset = <0x0>;
222227 mask = <0x01>;
223228 label = "userled:0";
@@ -225,8 +230,9 @@ · 1 unmodified line
225230 default-state = "on";
226231 };
227232
228− led1 {
233+ led@0,1 {
229234 compatible = "register-bit-led";
235+ reg = <0x00 0x04>;
230236 offset = <0x0>;
231237 mask = <0x02>;
232238 label = "userled:1";
arch/arm/boot/dts/mstar-v7.dtsi+9−0
@@ -39,6 +39,7 @@ · 38 unmodified lines
3939 * u-boot is broken
4040 */
4141 clock-frequency = <6000000>;
42+ arm,cpu-registers-not-fw-configured;
4243 };
4344
4445 pmu: pmu {
@@ -109,12 +110,20 @@ · 64 unmodified lines
109110 mask = <0x79>;
110111 };
111112
113+ rtc@2400 {
114+ compatible = "mstar,msc313-rtc";
115+ reg = <0x2400 0x40>;
116+ clocks = <&xtal_div2>;
117+ interrupts-extended = <&intc_irq GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
118+ };
119+
112120 watchdog@6000 {
113121 compatible = "mstar,msc313e-wdt";
114122 reg = <0x6000 0x1f>;
115123 clocks = <&xtal_div2>;
116124 };
117125
126+
118127 intc_fiq: interrupt-controller@201310 {
119128 compatible = "mstar,mst-intc";
120129 reg = <0x201310 0x40>;
arch/arm/boot/dts/mt7623.dtsi+33−0
@@ -585,6 +585,39 @@ · 584 unmodified lines
585585 status = "disabled";
586586 };
587587
588+ usb0: usb@11200000 {
589+ compatible = "mediatek,mt7623-musb",
590+ "mediatek,mtk-musb";
591+ reg = <0 0x11200000 0 0x1000>;
592+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
593+ interrupt-names = "mc";
594+ phys = <&u2port2 PHY_TYPE_USB2>;
595+ dr_mode = "otg";
596+ clocks = <&pericfg CLK_PERI_USB0>,
597+ <&pericfg CLK_PERI_USB0_MCU>,
598+ <&pericfg CLK_PERI_USB_SLV>;
599+ clock-names = "main","mcu","univpll";
600+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
601+ status = "disabled";
602+ };
603+
604+ u2phy1: t-phy@11210000 {
605+ compatible = "mediatek,mt7623-tphy",
606+ "mediatek,generic-tphy-v1";
607+ reg = <0 0x11210000 0 0x0800>;
608+ #address-cells = <2>;
609+ #size-cells = <2>;
610+ ranges;
611+ status = "disabled";
612+
613+ u2port2: usb-phy@11210800 {
614+ reg = <0 0x11210800 0 0x0100>;
615+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
616+ clock-names = "ref";
617+ #phy-cells = <1>;
618+ };
619+ };
620+
588621 audsys: clock-controller@11220000 {
589622 compatible = "mediatek,mt7623-audsys",
590623 "mediatek,mt2701-audsys",
arch/arm/boot/dts/mt7623a.dtsi+4−0
@@ -35,6 +35,10 @@ · 34 unmodified lines
3535 clock-names = "ethif";
3636 };
3737
38+&usb0 {
39+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
40+};
41+
3842 &usb1 {
3943 power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
4044 };
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts+25−0
@@ -366,6 +366,14 @@ · 365 unmodified lines
366366 status = "okay";
367367 };
368368
369+&pio {
370+ musb_pins: musb {
371+ pins-musb {
372+ pinmux = <MT7623_PIN_237_EXT_SDIO2_FUNC_DRV_VBUS>;
373+ };
374+ };
375+};
376+
369377 &pwm {
370378 pinctrl-names = "default";
371379 pinctrl-0 = <&pwm_pins_a>;
@@ -396,6 +404,19 @@ · 24 unmodified lines
396404 status = "okay";
397405 };
398406
407+&usb0 {
408+ pinctrl-names = "default";
409+ pinctrl-0 = <&musb_pins>;
410+ status = "okay";
411+ usb-role-switch;
412+
413+ connector {
414+ compatible = "gpio-usb-b-connector", "usb-b-connector";
415+ type = "micro";
416+ id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
417+ };
418+};
419+
399420 &usb1 {
400421 vusb33-supply = <&reg_3p3v>;
401422 vbus-supply = <&reg_5v>;
@@ -408,6 +429,10 @@ · 6 unmodified lines
408429 status = "okay";
409430 };
410431
432+&u2phy1 {
433+ status = "okay";
434+};
435+
411436 &u3phy1 {
412437 status = "okay";
413438 };
arch/arm/boot/dts/mt7629-rfb.dts+2−1
@@ -140,9 +140,10 @@ · 139 unmodified lines
140140 };
141141 };
142142
143−&pcie {
143+&pcie1 {
144144 pinctrl-names = "default";
145145 pinctrl-0 = <&pcie_pins>;
146+ status = "okay";
146147 };
147148
148149 &pciephy1 {
arch/arm/boot/dts/mt7629.dtsi+21−24
@@ -361,16 +361,21 @@ · 360 unmodified lines
361361 #reset-cells = <1>;
362362 };
363363
364− pcie: pcie@1a140000 {
364+ pciecfg: pciecfg@1a140000 {
365+ compatible = "mediatek,generic-pciecfg", "syscon";
366+ reg = <0x1a140000 0x1000>;
367+ };
368+
369+ pcie1: pcie@1a145000 {
365370 compatible = "mediatek,mt7629-pcie";
366371 device_type = "pci";
367− reg = <0x1a140000 0x1000>,
368− <0x1a145000 0x1000>;
369− reg-names = "subsys","port1";
372+ reg = <0x1a145000 0x1000>;
373+ reg-names = "port1";
374+ linux,pci-domain = <1>;
370375 #address-cells = <3>;
371376 #size-cells = <2>;
372− interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
373− <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
377+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
378+ interrupt-names = "pcie_irq";
374379 clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
375380 <&pciesys CLK_PCIE_P0_AHB_EN>,
376381 <&pciesys CLK_PCIE_P1_AUX_EN>,
@@ -391,26 +396,18 @@ · 14 unmodified lines
391396 power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
392397 bus-range = <0x00 0xff>;
393398 ranges = <0x82000000 0 0x20000000 0x20000000 0 0x10000000>;
399+ status = "disabled";
394400
395− pcie1: pcie@1,0 {
396− device_type = "pci";
397− reg = <0x0800 0 0 0 0>;
398− #address-cells = <3>;
399− #size-cells = <2>;
401+ #interrupt-cells = <1>;
402+ interrupt-map-mask = <0 0 0 7>;
403+ interrupt-map = <0 0 0 1 &pcie_intc1 0>,
404+ <0 0 0 2 &pcie_intc1 1>,
405+ <0 0 0 3 &pcie_intc1 2>,
406+ <0 0 0 4 &pcie_intc1 3>;
407+ pcie_intc1: interrupt-controller {
408+ interrupt-controller;
409+ #address-cells = <0>;
400410 #interrupt-cells = <1>;
401− ranges;
402− num-lanes = <1>;
403− interrupt-map-mask = <0 0 0 7>;
404− interrupt-map = <0 0 0 1 &pcie_intc1 0>,
405− <0 0 0 2 &pcie_intc1 1>,
406− <0 0 0 3 &pcie_intc1 2>,
407− <0 0 0 4 &pcie_intc1 3>;
408−
409− pcie_intc1: interrupt-controller {
410− interrupt-controller;
411− #address-cells = <0>;
412− #interrupt-cells = <1>;
413− };
414411 };
415412 };
416413
arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi+2−2
@@ -25,8 +25,8 @@ · 24 unmodified lines
2525 compatible = "smsc,lan9221", "smsc,lan9115";
2626 bank-width = <2>;
2727 gpmc,device-width = <1>;
28− gpmc,cycle2cycle-samecsen = <1>;
29− gpmc,cycle2cycle-diffcsen = <1>;
28+ gpmc,cycle2cycle-samecsen;
29+ gpmc,cycle2cycle-diffcsen;
3030 gpmc,cs-on-ns = <5>;
3131 gpmc,cs-rd-off-ns = <150>;
3232 gpmc,cs-wr-off-ns = <150>;
arch/arm/boot/dts/omap-gpmc-smsc9221.dtsi+1−1
@@ -29,7 +29,7 @@ · 28 unmodified lines
2929 compatible = "smsc,lan9221","smsc,lan9115";
3030 bank-width = <2>;
3131
32− gpmc,mux-add-data;
32+ gpmc,mux-add-data = <0>;
3333 gpmc,cs-on-ns = <0>;
3434 gpmc,cs-rd-off-ns = <42>;
3535 gpmc,cs-wr-off-ns = <36>;
arch/arm/boot/dts/omap-zoom-common.dtsi+2−2
@@ -27,8 +27,8 @@ · 26 unmodified lines
2727 gpmc,mux-add-data = <0>;
2828 gpmc,device-width = <1>;
2929 gpmc,wait-pin = <1>;
30− gpmc,cycle2cycle-samecsen = <1>;
31− gpmc,cycle2cycle-diffcsen = <1>;
30+ gpmc,cycle2cycle-samecsen;
31+ gpmc,cycle2cycle-diffcsen;
3232 gpmc,cs-on-ns = <5>;
3333 gpmc,cs-rd-off-ns = <155>;
3434 gpmc,cs-wr-off-ns = <155>;
arch/arm/boot/dts/omap2430-sdp.dts+2−2
@@ -43,8 +43,8 @@ · 42 unmodified lines
4343 gpmc,sync-clk-ps = <0>;
4444 gpmc,mux-add-data = <2>;
4545 gpmc,device-width = <1>;
46− gpmc,cycle2cycle-samecsen = <1>;
47− gpmc,cycle2cycle-diffcsen = <1>;
46+ gpmc,cycle2cycle-samecsen;
47+ gpmc,cycle2cycle-diffcsen;
4848 gpmc,cs-on-ns = <6>;
4949 gpmc,cs-rd-off-ns = <187>;
5050 gpmc,cs-wr-off-ns = <187>;
arch/arm/boot/dts/omap3-cpu-thermal.dtsi+1−1
@@ -10,7 +10,7 @@ · 9 unmodified lines
1010
1111 #include <dt-bindings/thermal/thermal.h>
1212
13−cpu_thermal: cpu_thermal {
13+cpu_thermal: cpu-thermal {
1414 polling-delay-passive = <250>; /* milliseconds */
1515 polling-delay = <1000>; /* milliseconds */
1616 coefficients = <0 20000>;
arch/arm/boot/dts/omap3-devkit8000-common.dtsi+2−2
@@ -267,8 +267,8 @@ · 266 unmodified lines
267267 gpmc,mux-add-data = <0>;
268268 gpmc,device-width = <1>;
269269 gpmc,wait-pin = <0>;
270− gpmc,cycle2cycle-samecsen = <1>;
271− gpmc,cycle2cycle-diffcsen = <1>;
270+ gpmc,cycle2cycle-samecsen;
271+ gpmc,cycle2cycle-diffcsen;
272272
273273 gpmc,cs-on-ns = <6>;
274274 gpmc,cs-rd-off-ns = <180>;
arch/arm/boot/dts/omap3-gta04.dtsi+13−10
@@ -104,16 +104,16 @@ · 103 unmodified lines
104104 #sound-dai-cells = <0>;
105105 };
106106
107− spi_lcd: spi_lcd {
107+ spi_lcd: spi {
108108 compatible = "spi-gpio";
109109 #address-cells = <0x1>;
110110 #size-cells = <0x0>;
111111 pinctrl-names = "default";
112112 pinctrl-0 = <&spi_gpio_pins>;
113113
114− gpio-sck = <&gpio1 12 GPIO_ACTIVE_HIGH>;
115− gpio-miso = <&gpio1 18 GPIO_ACTIVE_HIGH>;
116− gpio-mosi = <&gpio1 20 GPIO_ACTIVE_HIGH>;
114+ sck-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
115+ miso-gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
116+ mosi-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
117117 cs-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
118118 num-chipselects = <1>;
119119
@@ -508,6 +508,8 @@ · 388 unmodified lines
508508 pinctrl-0 = <&bmp085_pins>;
509509 interrupt-parent = <&gpio4>;
510510 interrupts = <17 IRQ_TYPE_EDGE_RISING>; /* GPIO_113 */
511+ vdda-supply = <&vio>;
512+ vddd-supply = <&vio>;
511513 };
512514
513515 /* accelerometer */
@@ -515,7 +517,7 @@ · 1 unmodified line
515517 compatible = "bosch,bma180";
516518 reg = <0x41>;
517519 pinctrl-names = "default";
518− pintcrl-0 = <&bma180_pins>;
520+ pinctrl-0 = <&bma180_pins>;
519521 interrupt-parent = <&gpio4>;
520522 interrupts = <19 IRQ_TYPE_LEVEL_HIGH>; /* GPIO_115 */
521523 };
@@ -540,28 +542,29 @@ · 18 unmodified lines
540542 gpio-controller;
541543 #gpio-cells = <2>;
542544
543− gta04_led0: red_aux@0 {
545+ gta04_led0: led@0 {
544546 label = "gta04:red:aux";
545547 reg = <0x0>;
546548 };
547549
548− gta04_led1: green_aux@1 {
550+ gta04_led1: led@1 {
549551 label = "gta04:green:aux";
550552 reg = <0x1>;
551553 };
552554
553− gta04_led3: red_power@3 {
555+ gta04_led3: led@3 {
554556 label = "gta04:red:power";
555557 reg = <0x3>;
556558 linux,default-trigger = "default-on";
557559 };
558560
559− gta04_led4: green_power@4 {
561+ gta04_led4: led@4 {
560562 label = "gta04:green:power";
561563 reg = <0x4>;
562564 };
563565
564− wifi_reset: wifi_reset@6 { /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
566+ wifi_reset: led@6 {
567+ /* reference as <&tca_gpios 0 0> since it is currently the only GPIO */
565568 reg = <0x6>;
566569 compatible = "gpio";
567570 };
arch/arm/boot/dts/omap3-gta04a5.dts+2−0
@@ -133,5 +133,7 @@ · 132 unmodified lines
133133 bme280@76 {
134134 compatible = "bosch,bme280";
135135 reg = <0x76>;
136+ vdda-supply = <&vio>;
137+ vddd-supply = <&vio>;
136138 };
137139 };
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi+1−1
@@ -22,7 +22,7 @@ · 21 unmodified lines
2222 compatible = "smsc,lan9221","smsc,lan9115";
2323 bank-width = <2>;
2424
25− gpmc,mux-add-data;
25+ gpmc,mux-add-data = <0>;
2626 gpmc,cs-on-ns = <0>;
2727 gpmc,cs-rd-off-ns = <42>;
2828 gpmc,cs-wr-off-ns = <36>;
arch/arm/boot/dts/omap3-sb-t35.dtsi+2−2
@@ -108,8 +108,8 @@ · 107 unmodified lines
108108 reg = <4 0 0xff>;
109109 bank-width = <2>;
110110 gpmc,device-width = <1>;
111− gpmc,cycle2cycle-samecsen = <1>;
112− gpmc,cycle2cycle-diffcsen = <1>;
111+ gpmc,cycle2cycle-samecsen;
112+ gpmc,cycle2cycle-diffcsen;
113113 gpmc,cs-on-ns = <5>;
114114 gpmc,cs-rd-off-ns = <150>;
115115 gpmc,cs-wr-off-ns = <150>;
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts+237−0
@@ -0,0 +1,237 @@
1+// SPDX-License-Identifier: BSD-3-Clause
2+/*
3+ * Copyright (c) 2021, Luca Weiss <luca@z3ntu.xyz>
4+ */
5+
6+/dts-v1/;
7+
8+#include "qcom-msm8226.dtsi"
9+#include "qcom-pm8226.dtsi"
10+
11+/ {
12+ model = "LG G Watch R";
13+ compatible = "lg,lenok", "qcom,apq8026";
14+ qcom,board-id = <132 0x0a>;
15+ qcom,msm-id = <199 0x20000>;
16+
17+ aliases {
18+ serial0 = &blsp1_uart3;
19+ };
20+
21+ chosen {
22+ stdout-path = "serial0:115200n8";
23+ };
24+};
25+
26+&blsp1_i2c5 {
27+ status = "okay";
28+ clock-frequency = <384000>;
29+
30+ touchscreen@20 {
31+ compatible = "syna,rmi4-i2c";
32+ reg = <0x20>;
33+
34+ interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>;
35+ vdd-supply = <&pm8226_l15>;
36+ vio-supply = <&pm8226_l22>;
37+
38+ pinctrl-names = "default";
39+ pinctrl-0 = <&touch_pins>;
40+
41+ #address-cells = <1>;
42+ #size-cells = <0>;
43+
44+ rmi4-f01@1 {
45+ reg = <0x1>;
46+ syna,nosleep-mode = <1>;
47+ };
48+
49+ rmi4-f12@12 {
50+ reg = <0x12>;
51+ syna,sensor-type = <1>;
52+ };
53+ };
54+};
55+
56+&blsp1_uart3 {
57+ status = "okay";
58+};
59+
60+&rpm_requests {
61+ pm8226-regulators {
62+ compatible = "qcom,rpm-pm8226-regulators";
63+
64+ pm8226_s1: s1 {
65+ regulator-min-microvolt = <500000>;
66+ regulator-max-microvolt = <1275000>;
67+ };
68+ pm8226_s3: s3 {
69+ regulator-min-microvolt = <1200000>;
70+ regulator-max-microvolt = <1350000>;
71+ };
72+ pm8226_s4: s4 {
73+ regulator-min-microvolt = <1800000>;
74+ regulator-max-microvolt = <2200000>;
75+ };
76+ pm8226_s5: s5 {
77+ regulator-min-microvolt = <1150000>;
78+ regulator-max-microvolt = <1150000>;
79+ };
80+
81+ pm8226_l1: l1 {
82+ regulator-min-microvolt = <1225000>;
83+ regulator-max-microvolt = <1225000>;
84+ };
85+ pm8226_l2: l2 {
86+ regulator-min-microvolt = <1200000>;
87+ regulator-max-microvolt = <1200000>;
88+ };
89+ pm8226_l3: l3 {
90+ regulator-min-microvolt = <750000>;
91+ regulator-max-microvolt = <1337500>;
92+ };
93+ pm8226_l4: l4 {
94+ regulator-min-microvolt = <1200000>;
95+ regulator-max-microvolt = <1200000>;
96+ };
97+ pm8226_l5: l5 {
98+ regulator-min-microvolt = <1200000>;
99+ regulator-max-microvolt = <1200000>;
100+ };
101+ pm8226_l6: l6 {
102+ regulator-min-microvolt = <1800000>;
103+ regulator-max-microvolt = <1800000>;
104+ };
105+ pm8226_l7: l7 {
106+ regulator-min-microvolt = <1850000>;
107+ regulator-max-microvolt = <1850000>;
108+ };
109+ pm8226_l8: l8 {
110+ regulator-min-microvolt = <1800000>;
111+ regulator-max-microvolt = <1800000>;
112+ };
113+ pm8226_l9: l9 {
114+ regulator-min-microvolt = <2050000>;
115+ regulator-max-microvolt = <2050000>;
116+ };
117+ pm8226_l10: l10 {
118+ regulator-min-microvolt = <1800000>;
119+ regulator-max-microvolt = <1800000>;
120+ };
121+ pm8226_l12: l12 {
122+ regulator-min-microvolt = <1800000>;
123+ regulator-max-microvolt = <1800000>;
124+ };
125+ pm8226_l14: l14 {
126+ regulator-min-microvolt = <2750000>;
127+ regulator-max-microvolt = <2750000>;
128+ };
129+ pm8226_l15: l15 {
130+ regulator-min-microvolt = <3300000>;
131+ regulator-max-microvolt = <3300000>;
132+ };
133+ pm8226_l16: l16 {
134+ regulator-min-microvolt = <3000000>;
135+ regulator-max-microvolt = <3350000>;
136+ };
137+ pm8226_l17: l17 {
138+ regulator-min-microvolt = <2950000>;
139+ regulator-max-microvolt = <2950000>;
140+ };
141+ pm8226_l18: l18 {
142+ regulator-min-microvolt = <3000000>;
143+ regulator-max-microvolt = <3300000>;
144+ };
145+ pm8226_l19: l19 {
146+ regulator-min-microvolt = <3000000>;
147+ regulator-max-microvolt = <3000000>;
148+ };
149+ pm8226_l20: l20 {
150+ regulator-min-microvolt = <3075000>;
151+ regulator-max-microvolt = <3075000>;
152+ };
153+ pm8226_l21: l21 {
154+ regulator-min-microvolt = <1800000>;
155+ regulator-max-microvolt = <2950000>;
156+ };
157+ pm8226_l22: l22 {
158+ regulator-min-microvolt = <1800000>;
159+ regulator-max-microvolt = <1800000>;
160+ };
161+ pm8226_l23: l23 {
162+ regulator-min-microvolt = <1800000>;
163+ regulator-max-microvolt = <2950000>;
164+ };
165+ pm8226_l24: l24 {
166+ regulator-min-microvolt = <1300000>;
167+ regulator-max-microvolt = <1350000>;
168+ };
169+ pm8226_l25: l25 {
170+ regulator-min-microvolt = <1775000>;
171+ regulator-max-microvolt = <2125000>;
172+ };
173+ pm8226_l26: l26 {
174+ regulator-min-microvolt = <1225000>;
175+ regulator-max-microvolt = <1225000>;
176+ };
177+ pm8226_l27: l27 {
178+ regulator-min-microvolt = <2050000>;
179+ regulator-max-microvolt = <2050000>;
180+ };
181+ pm8226_l28: l28 {
182+ regulator-min-microvolt = <2700000>;
183+ regulator-max-microvolt = <3000000>;
184+ };
185+
186+ pm8226_lvs1: lvs1 {};
187+ };
188+};
189+
190+&sdhc_1 {
191+ status = "okay";
192+
193+ vmmc-supply = <&pm8226_l17>;
194+ vqmmc-supply = <&pm8226_l6>;
195+
196+ bus-width = <8>;
197+ non-removable;
198+
199+ pinctrl-names = "default";
200+ pinctrl-0 = <&sdhc1_pin_a>;
201+};
202+
203+&tlmm {
204+ sdhc1_pin_a: sdhc1-pin-active {
205+ clk {
206+ pins = "sdc1_clk";
207+ drive-strength = <10>;
208+ bias-disable;
209+ };
210+
211+ cmd-data {
212+ pins = "sdc1_cmd", "sdc1_data";
213+ drive-strength = <10>;
214+ bias-pull-up;
215+ };
216+ };
217+
218+ touch_pins: touch {
219+ irq {
220+ pins = "gpio17";
221+ function = "gpio";
222+
223+ drive-strength = <8>;
224+ bias-pull-down;
225+ input-enable;
226+ };
227+
228+ reset {
229+ pins = "gpio16";
230+ function = "gpio";
231+
232+ drive-strength = <8>;
233+ bias-disable;
234+ output-high;
235+ };
236+ };
237+};
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts+5−5
@@ -357,8 +357,8 @@ · 356 unmodified lines
357357 };
358358
359359 mpps@50 {
360− dragon_cm3605_mpps: cm3605-mpps {
361− pinconf {
360+ dragon_cm3605_mpps: cm3605-mpps-state {
361+ mpp5 {
362362 pins = "mpp5";
363363 function = "analog";
364364 input-enable;
@@ -899,7 +899,7 @@ · 534 unmodified lines
899899 };
900900 amba {
901901 /* Internal 3.69 GiB eMMC */
902− sdcc@12400000 {
902+ mmc@12400000 {
903903 status = "okay";
904904 pinctrl-names = "default";
905905 pinctrl-0 = <&dragon_sdcc1_pins>;
@@ -908,7 +908,7 @@ · 2 unmodified lines
908908 };
909909
910910 /* External micro SD card, directly connected, pulled up to 2.85 V */
911− sdcc@12180000 {
911+ mmc@12180000 {
912912 status = "okay";
913913 /* Enable SSBI GPIO 22 as input, use for card detect */
914914 pinctrl-names = "default";
@@ -922,7 +922,7 @@ · 7 unmodified lines
922922 * Second external micro SD card, using two TXB104RGYR levelshifters
923923 * to lift from 1.8 V to 2.85 V
924924 */
925− sdcc@12200000 {
925+ mmc@12200000 {
926926 status = "okay";
927927 /* Enable SSBI GPIO 26 as input, use for card detect */
928928 pinctrl-names = "default";
arch/arm/boot/dts/qcom-apq8064-asus-nexus7-flo.dts+1−1
@@ -335,7 +335,7 @@ · 334 unmodified lines
335335
336336 amba {
337337 /* eMMC */
338− sdcc@12400000 {
338+ mmc@12400000 {
339339 status = "okay";
340340 vmmc-supply = <&pm8921_l5>;
341341 vqmmc-supply = <&pm8921_s4>;
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts+3−3
@@ -220,14 +220,14 @@ · 219 unmodified lines
220220
221221 amba {
222222 /* eMMC */
223− sdcc1: sdcc@12400000 {
223+ sdcc1: mmc@12400000 {
224224 status = "okay";
225225 vmmc-supply = <&pm8921_l5>;
226226 vqmmc-supply = <&pm8921_s4>;
227227 };
228228
229229 /* External micro SD card */
230− sdcc3: sdcc@12180000 {
230+ sdcc3: mmc@12180000 {
231231 status = "okay";
232232 vmmc-supply = <&v3p3_fixed>;
233233 pinctrl-names = "default";
@@ -235,7 +235,7 @@ · 1 unmodified line
235235 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
236236 };
237237 /* WLAN */
238− sdcc4: sdcc@121c0000 {
238+ sdcc4: mmc@121c0000 {
239239 status = "okay";
240240 vmmc-supply = <&v3p3_fixed>;
241241 vqmmc-supply = <&v3p3_fixed>;
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts+3−3
@@ -314,14 +314,14 @@ · 313 unmodified lines
314314
315315 amba {
316316 /* eMMC */
317− sdcc1: sdcc@12400000 {
317+ sdcc1: mmc@12400000 {
318318 status = "okay";
319319 vmmc-supply = <&pm8921_l5>;
320320 vqmmc-supply = <&pm8921_s4>;
321321 };
322322
323323 /* External micro SD card */
324− sdcc3: sdcc@12180000 {
324+ sdcc3: mmc@12180000 {
325325 status = "okay";
326326 vmmc-supply = <&pm8921_l6>;
327327 pinctrl-names = "default";
@@ -329,7 +329,7 @@ · 1 unmodified line
329329 cd-gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
330330 };
331331 /* WLAN */
332− sdcc4: sdcc@121c0000 {
332+ sdcc4: mmc@121c0000 {
333333 status = "okay";
334334 vmmc-supply = <&ext_3p3v>;
335335 vqmmc-supply = <&pm8921_lvs1>;
arch/arm/boot/dts/qcom-apq8064-sony-xperia-yuga.dts+2−2
@@ -374,14 +374,14 @@ · 373 unmodified lines
374374 };
375375
376376 amba {
377− sdcc1: sdcc@12400000 {
377+ sdcc1: mmc@12400000 {
378378 status = "okay";
379379
380380 vmmc-supply = <&pm8921_l5>;
381381 vqmmc-supply = <&pm8921_s4>;
382382 };
383383
384− sdcc3: sdcc@12180000 {
384+ sdcc3: mmc@12180000 {
385385 status = "okay";
386386
387387 vmmc-supply = <&pm8921_l6>;
arch/arm/boot/dts/qcom-apq8064.dtsi+28−35
@@ -95,13 +95,13 @@ · 94 unmodified lines
9595 };
9696 };
9797
98− memory {
98+ memory@0 {
9999 device_type = "memory";
100100 reg = <0x0 0x0>;
101101 };
102102
103103 thermal-zones {
104− cpu-thermal0 {
104+ cpu0-thermal {
105105 polling-delay-passive = <250>;
106106 polling-delay = <1000>;
107107
@@ -122,7 +122,7 @@ · 14 unmodified lines
122122 };
123123 };
124124
125− cpu-thermal1 {
125+ cpu1-thermal {
126126 polling-delay-passive = <250>;
127127 polling-delay = <1000>;
128128
@@ -143,7 +143,7 @@ · 14 unmodified lines
143143 };
144144 };
145145
146− cpu-thermal2 {
146+ cpu2-thermal {
147147 polling-delay-passive = <250>;
148148 polling-delay = <1000>;
149149
@@ -164,7 +164,7 @@ · 14 unmodified lines
164164 };
165165 };
166166
167− cpu-thermal3 {
167+ cpu3-thermal {
168168 polling-delay-passive = <250>;
169169 polling-delay = <1000>;
170170
@@ -683,12 +683,11 @@ · 512 unmodified lines
683683 pm8821_mpps: mpps@50 {
684684 compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
685685 reg = <0x50>;
686− interrupts = <24 IRQ_TYPE_NONE>,
687− <25 IRQ_TYPE_NONE>,
688− <26 IRQ_TYPE_NONE>,
689− <27 IRQ_TYPE_NONE>;
686+ interrupt-controller;
687+ #interrupt-cells = <2>;
690688 gpio-controller;
691689 #gpio-cells = <2>;
690+ gpio-ranges = <&pm8821_mpps 0 0 4>;
692691 };
693692 };
694693 };
@@ -726,19 +725,9 @@ · 31 unmodified lines
726725 reg = <0x50>;
727726 gpio-controller;
728727 #gpio-cells = <2>;
729− interrupts =
730− <128 IRQ_TYPE_NONE>,
731− <129 IRQ_TYPE_NONE>,
732− <130 IRQ_TYPE_NONE>,
733− <131 IRQ_TYPE_NONE>,
734− <132 IRQ_TYPE_NONE>,
735− <133 IRQ_TYPE_NONE>,
736− <134 IRQ_TYPE_NONE>,
737− <135 IRQ_TYPE_NONE>,
738− <136 IRQ_TYPE_NONE>,
739− <137 IRQ_TYPE_NONE>,
740− <138 IRQ_TYPE_NONE>,
741− <139 IRQ_TYPE_NONE>;
728+ gpio-ranges = <&pm8921_mpps 0 0 12>;
729+ interrupt-controller;
730+ #interrupt-cells = <2>;
742731 };
743732
744733 rtc@11d {
@@ -1084,7 +1073,7 @@ · 339 unmodified lines
10841073 #address-cells = <1>;
10851074 #size-cells = <1>;
10861075 ranges;
1087− sdcc1: sdcc@12400000 {
1076+ sdcc1: mmc@12400000 {
10881077 status = "disabled";
10891078 compatible = "arm,pl18x", "arm,primecell";
10901079 pinctrl-names = "default";
@@ -1104,7 +1093,7 @@ · 13 unmodified lines
11041093 dma-names = "tx", "rx";
11051094 };
11061095
1107− sdcc3: sdcc@12180000 {
1096+ sdcc3: mmc@12180000 {
11081097 compatible = "arm,pl18x", "arm,primecell";
11091098 arm,primecell-periphid = <0x00051180>;
11101099 status = "disabled";
@@ -1122,7 +1111,7 @@ · 11 unmodified lines
11221111 dma-names = "tx", "rx";
11231112 };
11241113
1125− sdcc4: sdcc@121c0000 {
1114+ sdcc4: mmc@121c0000 {
11261115 compatible = "arm,pl18x", "arm,primecell";
11271116 arm,primecell-periphid = <0x00051180>;
11281117 status = "disabled";
@@ -1229,13 +1218,17 @@ · 100 unmodified lines
12291218 &gfx3d1 30
12301219 &gfx3d1 31>;
12311220
1232− qcom,gpu-pwrlevels {
1233− compatible = "qcom,gpu-pwrlevels";
1234− qcom,gpu-pwrlevel@0 {
1235− qcom,gpu-freq = <450000000>;
1221+ operating-points-v2 = <&gpu_opp_table>;
1222+
1223+ gpu_opp_table: opp-table {
1224+ compatible = "operating-points-v2";
1225+
1226+ opp-320000000 {
1227+ opp-hz = /bits/ 64 <450000000>;
12361228 };
1237− qcom,gpu-pwrlevel@1 {
1238− qcom,gpu-freq = <27000000>;
1229+
1230+ opp-27000000 {
1231+ opp-hz = /bits/ 64 <27000000>;
12391232 };
12401233 };
12411234 };
@@ -1419,9 +1412,9 @@ · 177 unmodified lines
14191412 clocks = <&mmcc HDMI_APP_CLK>,
14201413 <&mmcc HDMI_M_AHB_CLK>,
14211414 <&mmcc HDMI_S_AHB_CLK>;
1422− clock-names = "core_clk",
1423− "master_iface_clk",
1424− "slave_iface_clk";
1415+ clock-names = "core",
1416+ "master_iface",
1417+ "slave_iface";
14251418
14261419 phys = <&hdmi_phy>;
14271420 phy-names = "hdmi-phy";
@@ -1452,7 +1445,7 @@ · 24 unmodified lines
14521445 "hdmi_pll";
14531446
14541447 clocks = <&mmcc HDMI_S_AHB_CLK>;
1455− clock-names = "slave_iface_clk";
1448+ clock-names = "slave_iface";
14561449 #phy-cells = <0>;
14571450 };
14581451
arch/arm/boot/dts/qcom-apq8084.dtsi+4−4
@@ -102,7 +102,7 @@ · 101 unmodified lines
102102 };
103103
104104 thermal-zones {
105− cpu-thermal0 {
105+ cpu0-thermal {
106106 polling-delay-passive = <250>;
107107 polling-delay = <1000>;
108108
@@ -122,7 +122,7 @@ · 13 unmodified lines
122122 };
123123 };
124124
125− cpu-thermal1 {
125+ cpu1-thermal {
126126 polling-delay-passive = <250>;
127127 polling-delay = <1000>;
128128
@@ -142,7 +142,7 @@ · 13 unmodified lines
142142 };
143143 };
144144
145− cpu-thermal2 {
145+ cpu2-thermal {
146146 polling-delay-passive = <250>;
147147 polling-delay = <1000>;
148148
@@ -162,7 +162,7 @@ · 13 unmodified lines
162162 };
163163 };
164164
165− cpu-thermal3 {
165+ cpu3-thermal {
166166 polling-delay-passive = <250>;
167167 polling-delay = <1000>;
168168
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts+1−1
@@ -18,5 +18,5 @@ · 17 unmodified lines
1818
1919 / {
2020 model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
21−
21+ compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
2222 };
arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi+0−1
@@ -18,7 +18,6 @@ · 17 unmodified lines
1818
1919 / {
2020 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
21− compatible = "qcom,ipq4019";
2221
2322 aliases {
2423 serial0 = &blsp1_uart1;
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c1.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
55
66 / {
77 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C1";
8− compatible = "qcom,ipq4019-dk04.1-c1";
8+ compatible = "qcom,ipq4019-dk04.1-c1", "qcom,ipq4019";
99
1010 soc {
1111 dma@7984000 {
arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1-c3.dts+1−1
@@ -5,5 +5,5 @@ · 4 unmodified lines
55
66 / {
77 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1-C3";
8− compatible = "qcom,ipq4019-ap-dk04.1-c3";
8+ compatible = "qcom,ipq4019-ap-dk04.1-c3", "qcom,ipq4019";
99 };
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
55
66 / {
77 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
8− compatible = "qcom,ipq4019-ap-dk07.1-c1";
8+ compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
99
1010 soc {
1111 pci@40000000 {
arch/arm/boot/dts/qcom-ipq4019-ap.dk07.1-c2.dts+1−1
@@ -5,7 +5,7 @@ · 4 unmodified lines
55
66 / {
77 model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C2";
8− compatible = "qcom,ipq4019-ap-dk07.1-c2";
8+ compatible = "qcom,ipq4019-ap-dk07.1-c2", "qcom,ipq4019";
99
1010 soc {
1111 pinctrl@1000000 {
arch/arm/boot/dts/qcom-ipq8064-ap148.dts+1−1
@@ -3,7 +3,7 @@ · 2 unmodified lines
33
44 / {
55 model = "Qualcomm Technologies, Inc. IPQ8064/AP-148";
6− compatible = "qcom,ipq8064-ap148";
6+ compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
77
88 soc {
99 pinmux@800000 {
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts+4−4
@@ -19,12 +19,12 @@ · 18 unmodified lines
1919 stdout-path = "serial0:115200n8";
2020 };
2121
22− memory@0 {
22+ memory@42000000 {
2323 reg = <0x42000000 0x3e000000>;
2424 device_type = "memory";
2525 };
2626
27− mdio0: mdio@0 {
27+ mdio0: mdio-0 {
2828 status = "okay";
2929 compatible = "virtual,mdio-gpio";
3030 gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
@@ -91,7 +91,7 @@ · 60 unmodified lines
9191 };
9292 };
9393
94− mdio1: mdio@1 {
94+ mdio1: mdio-1 {
9595 status = "okay";
9696 compatible = "virtual,mdio-gpio";
9797 gpios = <&qcom_pinmux 11 GPIO_ACTIVE_HIGH>,
@@ -172,7 +172,7 @@ · 74 unmodified lines
172172
173173 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
174174
175− norflash: s25fl016k@0 {
175+ norflash: flash@0 {
176176 compatible = "jedec,spi-nor";
177177 #address-cells = <1>;
178178 #size-cells = <1>;
arch/arm/boot/dts/qcom-ipq8064.dtsi+13−13
@@ -49,7 +49,7 @@ · 48 unmodified lines
4949 };
5050
5151 thermal-zones {
52− tsens_tz_sensor0 {
52+ sensor0-thermal {
5353 polling-delay-passive = <0>;
5454 polling-delay = <0>;
5555 thermal-sensors = <&tsens 0>;
@@ -69,7 +69,7 @@ · 13 unmodified lines
6969 };
7070 };
7171
72− tsens_tz_sensor1 {
72+ sensor1-thermal {
7373 polling-delay-passive = <0>;
7474 polling-delay = <0>;
7575 thermal-sensors = <&tsens 1>;
@@ -89,7 +89,7 @@ · 13 unmodified lines
8989 };
9090 };
9191
92− tsens_tz_sensor2 {
92+ sensor2-thermal {
9393 polling-delay-passive = <0>;
9494 polling-delay = <0>;
9595 thermal-sensors = <&tsens 2>;
@@ -109,7 +109,7 @@ · 13 unmodified lines
109109 };
110110 };
111111
112− tsens_tz_sensor3 {
112+ sensor3-thermal {
113113 polling-delay-passive = <0>;
114114 polling-delay = <0>;
115115 thermal-sensors = <&tsens 3>;
@@ -129,7 +129,7 @@ · 13 unmodified lines
129129 };
130130 };
131131
132− tsens_tz_sensor4 {
132+ sensor4-thermal {
133133 polling-delay-passive = <0>;
134134 polling-delay = <0>;
135135 thermal-sensors = <&tsens 4>;
@@ -149,7 +149,7 @@ · 13 unmodified lines
149149 };
150150 };
151151
152− tsens_tz_sensor5 {
152+ sensor5-thermal {
153153 polling-delay-passive = <0>;
154154 polling-delay = <0>;
155155 thermal-sensors = <&tsens 5>;
@@ -169,7 +169,7 @@ · 13 unmodified lines
169169 };
170170 };
171171
172− tsens_tz_sensor6 {
172+ sensor6-thermal {
173173 polling-delay-passive = <0>;
174174 polling-delay = <0>;
175175 thermal-sensors = <&tsens 6>;
@@ -189,7 +189,7 @@ · 13 unmodified lines
189189 };
190190 };
191191
192− tsens_tz_sensor7 {
192+ sensor7-thermal {
193193 polling-delay-passive = <0>;
194194 polling-delay = <0>;
195195 thermal-sensors = <&tsens 7>;
@@ -209,7 +209,7 @@ · 13 unmodified lines
209209 };
210210 };
211211
212− tsens_tz_sensor8 {
212+ sensor8-thermal {
213213 polling-delay-passive = <0>;
214214 polling-delay = <0>;
215215 thermal-sensors = <&tsens 8>;
@@ -229,7 +229,7 @@ · 13 unmodified lines
229229 };
230230 };
231231
232− tsens_tz_sensor9 {
232+ sensor9-thermal {
233233 polling-delay-passive = <0>;
234234 polling-delay = <0>;
235235 thermal-sensors = <&tsens 9>;
@@ -249,7 +249,7 @@ · 13 unmodified lines
249249 };
250250 };
251251
252− tsens_tz_sensor10 {
252+ sensor10-thermal {
253253 polling-delay-passive = <0>;
254254 polling-delay = <0>;
255255 thermal-sensors = <&tsens 10>;
@@ -1181,7 +1181,7 @@ · 925 unmodified lines
11811181 #size-cells = <1>;
11821182 ranges;
11831183
1184− sdcc1: sdcc@12400000 {
1184+ sdcc1: mmc@12400000 {
11851185 status = "disabled";
11861186 compatible = "arm,pl18x", "arm,primecell";
11871187 arm,primecell-periphid = <0x00051180>;
@@ -1201,7 +1201,7 @@ · 13 unmodified lines
12011201 dma-names = "tx", "rx";
12021202 };
12031203
1204− sdcc3: sdcc@12180000 {
1204+ sdcc3: mmc@12180000 {
12051205 compatible = "arm,pl18x", "arm,primecell";
12061206 arm,primecell-periphid = <0x00051180>;
12071207 status = "disabled";
arch/arm/boot/dts/qcom-mdm9615-wp8548.dtsi+1−1
@@ -49,7 +49,7 @@ · 48 unmodified lines
4949 model = "Sierra Wireless WP8548 Module";
5050 compatible = "swir,wp8548", "qcom,mdm9615";
5151
52− memory {
52+ memory@48000000 {
5353 device_type = "memory";
5454 reg = <0x48000000 0x7F00000>;
5555 };
arch/arm/boot/dts/qcom-mdm9615.dtsi+6−10
@@ -300,18 +300,14 @@ · 299 unmodified lines
300300 pull-up;
301301 };
302302
303− pmicmpp: mpp@50 {
303+ pmicmpp: mpps@50 {
304304 compatible = "qcom,pm8018-mpp", "qcom,ssbi-mpp";
305− interrupt-parent = <&pmicintc>;
306− interrupts = <24 IRQ_TYPE_NONE>,
307− <25 IRQ_TYPE_NONE>,
308− <26 IRQ_TYPE_NONE>,
309− <27 IRQ_TYPE_NONE>,
310− <28 IRQ_TYPE_NONE>,
311− <29 IRQ_TYPE_NONE>;
305+ interrupt-controller;
306+ #interrupt-cells = <2>;
312307 reg = <0x50>;
313308 gpio-controller;
314309 #gpio-cells = <2>;
310+ gpio-ranges = <&pmicmpp 0 0 6>;
315311 };
316312
317313 rtc@11d {
@@ -358,7 +354,7 @@ · 40 unmodified lines
358354 #address-cells = <1>;
359355 #size-cells = <1>;
360356 ranges;
361− sdcc1: sdcc@12180000 {
357+ sdcc1: mmc@12180000 {
362358 status = "disabled";
363359 compatible = "arm,pl18x", "arm,primecell";
364360 arm,primecell-periphid = <0x00051180>;
@@ -378,7 +374,7 @@ · 13 unmodified lines
378374 assigned-clock-rates = <400000>;
379375 };
380376
381− sdcc2: sdcc@12140000 {
377+ sdcc2: mmc@12140000 {
382378 compatible = "arm,pl18x", "arm,primecell";
383379 arm,primecell-periphid = <0x00051180>;
384380 status = "disabled";
arch/arm/boot/dts/qcom-msm8226.dtsi+255−8
@@ -7,6 +7,7 @@ · 6 unmodified lines
77
88 #include <dt-bindings/interrupt-controller/arm-gic.h>
99 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
10+#include <dt-bindings/gpio/gpio.h>
1011
1112 / {
1213 #address-cells = <1>;
@@ -20,6 +21,70 @@ · 7 unmodified lines
2021 reg = <0x0 0x0>;
2122 };
2223
24+ clocks {
25+ xo_board: xo_board {
26+ compatible = "fixed-clock";
27+ #clock-cells = <0>;
28+ clock-frequency = <19200000>;
29+ };
30+
31+ sleep_clk: sleep_clk {
32+ compatible = "fixed-clock";
33+ #clock-cells = <0>;
34+ clock-frequency = <32768>;
35+ };
36+ };
37+
38+ firmware {
39+ scm {
40+ compatible = "qcom,scm-msm8226", "qcom,scm";
41+ clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
42+ clock-names = "core", "bus", "iface";
43+ };
44+ };
45+
46+ tcsr_mutex: hwlock {
47+ compatible = "qcom,tcsr-mutex";
48+ syscon = <&tcsr_mutex_block 0 0x80>;
49+
50+ #hwlock-cells = <1>;
51+ };
52+
53+ reserved-memory {
54+ #address-cells = <1>;
55+ #size-cells = <1>;
56+ ranges;
57+
58+ smem_region: smem@3000000 {
59+ reg = <0x3000000 0x100000>;
60+ no-map;
61+ };
62+ };
63+
64+ smd {
65+ compatible = "qcom,smd";
66+
67+ rpm {
68+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
69+ qcom,ipc = <&apcs 8 0>;
70+ qcom,smd-edge = <15>;
71+
72+ rpm_requests: rpm-requests {
73+ compatible = "qcom,rpm-msm8226";
74+ qcom,smd-channels = "rpm_requests";
75+ };
76+ };
77+ };
78+
79+ smem {
80+ compatible = "qcom,smem";
81+
82+ memory-region = <&smem_region>;
83+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
84+
85+ hwlocks = <&tcsr_mutex 3>;
86+ };
87+
2388 soc: soc {
2489 compatible = "simple-bus";
2590 #address-cells = <1>;
@@ -34,6 +99,136 @@ · 8 unmodified lines
3499 #interrupt-cells = <3>;
35100 };
36101
102+ apcs: syscon@f9011000 {
103+ compatible = "syscon";
104+ reg = <0xf9011000 0x1000>;
105+ };
106+
107+ sdhc_1: sdhci@f9824900 {
108+ compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
109+ reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
110+ reg-names = "hc_mem", "core_mem";
111+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
112+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
113+ interrupt-names = "hc_irq", "pwr_irq";
114+ clocks = <&gcc GCC_SDCC1_APPS_CLK>,
115+ <&gcc GCC_SDCC1_AHB_CLK>,
116+ <&xo_board>;
117+ clock-names = "core", "iface", "xo";
118+ status = "disabled";
119+ };
120+
121+ sdhc_2: sdhci@f98a4900 {
122+ compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
123+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
124+ reg-names = "hc_mem", "core_mem";
125+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
126+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
127+ interrupt-names = "hc_irq", "pwr_irq";
128+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
129+ <&gcc GCC_SDCC2_AHB_CLK>,
130+ <&xo_board>;
131+ clock-names = "core", "iface", "xo";
132+ status = "disabled";
133+ };
134+
135+ sdhc_3: sdhci@f9864900 {
136+ compatible = "qcom,msm8226-sdhci", "qcom,sdhci-msm-v4";
137+ reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
138+ reg-names = "hc_mem", "core_mem";
139+ interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
140+ <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
141+ interrupt-names = "hc_irq", "pwr_irq";
142+ clocks = <&gcc GCC_SDCC3_APPS_CLK>,
143+ <&gcc GCC_SDCC3_AHB_CLK>,
144+ <&xo_board>;
145+ clock-names = "core", "iface", "xo";
146+ status = "disabled";
147+ };
148+
149+ blsp1_uart3: serial@f991f000 {
150+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
151+ reg = <0xf991f000 0x1000>;
152+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
153+ clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
154+ clock-names = "core", "iface";
155+ status = "disabled";
156+ };
157+
158+ blsp1_uart4: serial@f9920000 {
159+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
160+ reg = <0xf9920000 0x1000>;
161+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
162+ clocks = <&gcc GCC_BLSP1_UART4_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
163+ clock-names = "core", "iface";
164+ status = "disabled";
165+ };
166+
167+ blsp1_i2c1: i2c@f9923000 {
168+ status = "disabled";
169+ compatible = "qcom,i2c-qup-v2.1.1";
170+ reg = <0xf9923000 0x1000>;
171+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
172+ clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
173+ clock-names = "core", "iface";
174+ pinctrl-names = "default";
175+ pinctrl-0 = <&blsp1_i2c1_pins>;
176+ #address-cells = <1>;
177+ #size-cells = <0>;
178+ };
179+
180+ blsp1_i2c2: i2c@f9924000 {
181+ status = "disabled";
182+ compatible = "qcom,i2c-qup-v2.1.1";
183+ reg = <0xf9924000 0x1000>;
184+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
185+ clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
186+ clock-names = "core", "iface";
187+ pinctrl-names = "default";
188+ pinctrl-0 = <&blsp1_i2c2_pins>;
189+ #address-cells = <1>;
190+ #size-cells = <0>;
191+ };
192+
193+ blsp1_i2c3: i2c@f9925000 {
194+ status = "disabled";
195+ compatible = "qcom,i2c-qup-v2.1.1";
196+ reg = <0xf9925000 0x1000>;
197+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
198+ clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
199+ clock-names = "core", "iface";
200+ pinctrl-names = "default";
201+ pinctrl-0 = <&blsp1_i2c3_pins>;
202+ #address-cells = <1>;
203+ #size-cells = <0>;
204+ };
205+
206+ blsp1_i2c4: i2c@f9926000 {
207+ status = "disabled";
208+ compatible = "qcom,i2c-qup-v2.1.1";
209+ reg = <0xf9926000 0x1000>;
210+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
211+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
212+ clock-names = "core", "iface";
213+ pinctrl-names = "default";
214+ pinctrl-0 = <&blsp1_i2c4_pins>;
215+ #address-cells = <1>;
216+ #size-cells = <0>;
217+ };
218+
219+ blsp1_i2c5: i2c@f9927000 {
220+ status = "disabled";
221+ compatible = "qcom,i2c-qup-v2.1.1";
222+ reg = <0xf9927000 0x1000>;
223+ interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
224+ clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
225+ clock-names = "core", "iface";
226+ pinctrl-names = "default";
227+ pinctrl-0 = <&blsp1_i2c5_pins>;
228+ #address-cells = <1>;
229+ #size-cells = <0>;
230+ };
231+
37232 gcc: clock-controller@fc400000 {
38233 compatible = "qcom,gcc-msm8226";
39234 reg = <0xfc400000 0x4000>;
@@ -51,15 +246,41 @@ · 11 unmodified lines
51246 interrupt-controller;
52247 #interrupt-cells = <2>;
53248 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
54− };
55249
56− blsp1_uart3: serial@f991f000 {
57− compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
58− reg = <0xf991f000 0x1000>;
59− interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
60− clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
61− clock-names = "core", "iface";
62− status = "disabled";
250+ blsp1_i2c1_pins: blsp1-i2c1 {
251+ pins = "gpio2", "gpio3";
252+ function = "blsp_i2c1";
253+ drive-strength = <2>;
254+ bias-disable;
255+ };
256+
257+ blsp1_i2c2_pins: blsp1-i2c2 {
258+ pins = "gpio6", "gpio7";
259+ function = "blsp_i2c2";
260+ drive-strength = <2>;
261+ bias-disable;
262+ };
263+
264+ blsp1_i2c3_pins: blsp1-i2c3 {
265+ pins = "gpio10", "gpio11";
266+ function = "blsp_i2c3";
267+ drive-strength = <2>;
268+ bias-disable;
269+ };
270+
271+ blsp1_i2c4_pins: blsp1-i2c4 {
272+ pins = "gpio14", "gpio15";
273+ function = "blsp_i2c4";
274+ drive-strength = <2>;
275+ bias-disable;
276+ };
277+
278+ blsp1_i2c5_pins: blsp1-i2c5 {
279+ pins = "gpio18", "gpio19";
280+ function = "blsp_i2c5";
281+ drive-strength = <2>;
282+ bias-disable;
283+ };
63284 };
64285
65286 restart@fc4ab000 {
@@ -67,6 +288,22 @@ · 1 unmodified line
67288 reg = <0xfc4ab000 0x4>;
68289 };
69290
291+ spmi_bus: spmi@fc4cf000 {
292+ compatible = "qcom,spmi-pmic-arb";
293+ reg-names = "core", "intr", "cnfg";
294+ reg = <0xfc4cf000 0x1000>,
295+ <0xfc4cb000 0x1000>,
296+ <0xfc4ca000 0x1000>;
297+ interrupt-names = "periph_irq";
298+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
299+ qcom,ee = <0>;
300+ qcom,channel = <0>;
301+ #address-cells = <2>;
302+ #size-cells = <0>;
303+ interrupt-controller;
304+ #interrupt-cells = <4>;
305+ };
306+
70307 rng@f9bff000 {
71308 compatible = "qcom,prng";
72309 reg = <0xf9bff000 0x200>;
@@ -131,6 +368,16 @@ · 58 unmodified lines
131368 status = "disabled";
132369 };
133370 };
371+
372+ rpm_msg_ram: memory@fc428000 {
373+ compatible = "qcom,rpm-msg-ram";
374+ reg = <0xfc428000 0x4000>;
375+ };
376+
377+ tcsr_mutex_block: syscon@fd484000 {
378+ compatible = "syscon";
379+ reg = <0xfd484000 0x2000>;
380+ };
134381 };
135382
136383 timer {
arch/arm/boot/dts/qcom-msm8660-surf.dts+2−2
@@ -35,13 +35,13 @@ · 34 unmodified lines
3535
3636 amba {
3737 /* eMMC */
38− sdcc1: sdcc@12400000 {
38+ sdcc1: mmc@12400000 {
3939 status = "okay";
4040 vmmc-supply = <&vsdcc_fixed>;
4141 };
4242
4343 /* External micro SD card */
44− sdcc3: sdcc@12180000 {
44+ sdcc3: mmc@12180000 {
4545 status = "okay";
4646 vmmc-supply = <&vsdcc_fixed>;
4747 };
arch/arm/boot/dts/qcom-msm8660.dtsi+8−19
@@ -307,20 +307,9 @@ · 306 unmodified lines
307307 reg = <0x50>;
308308 gpio-controller;
309309 #gpio-cells = <2>;
310− interrupt-parent = <&pm8058>;
311− interrupts =
312− <128 IRQ_TYPE_NONE>,
313− <129 IRQ_TYPE_NONE>,
314− <130 IRQ_TYPE_NONE>,
315− <131 IRQ_TYPE_NONE>,
316− <132 IRQ_TYPE_NONE>,
317− <133 IRQ_TYPE_NONE>,
318− <134 IRQ_TYPE_NONE>,
319− <135 IRQ_TYPE_NONE>,
320− <136 IRQ_TYPE_NONE>,
321− <137 IRQ_TYPE_NONE>,
322− <138 IRQ_TYPE_NONE>,
323− <139 IRQ_TYPE_NONE>;
310+ gpio-ranges = <&pm8058_mpps 0 0 12>;
311+ interrupt-controller;
312+ #interrupt-cells = <2>;
324313 };
325314
326315 pwrkey@1c {
@@ -494,7 +483,7 @@ · 167 unmodified lines
494483 #address-cells = <1>;
495484 #size-cells = <1>;
496485 ranges;
497− sdcc1: sdcc@12400000 {
486+ sdcc1: mmc@12400000 {
498487 status = "disabled";
499488 compatible = "arm,pl18x", "arm,primecell";
500489 arm,primecell-periphid = <0x00051180>;
@@ -510,7 +499,7 @@ · 9 unmodified lines
510499 cap-mmc-highspeed;
511500 };
512501
513− sdcc2: sdcc@12140000 {
502+ sdcc2: mmc@12140000 {
514503 status = "disabled";
515504 compatible = "arm,pl18x", "arm,primecell";
516505 arm,primecell-periphid = <0x00051180>;
@@ -525,7 +514,7 @@ · 8 unmodified lines
525514 cap-mmc-highspeed;
526515 };
527516
528− sdcc3: sdcc@12180000 {
517+ sdcc3: mmc@12180000 {
529518 compatible = "arm,pl18x", "arm,primecell";
530519 arm,primecell-periphid = <0x00051180>;
531520 status = "disabled";
@@ -541,7 +530,7 @@ · 9 unmodified lines
541530 no-1-8-v;
542531 };
543532
544− sdcc4: sdcc@121c0000 {
533+ sdcc4: mmc@121c0000 {
545534 compatible = "arm,pl18x", "arm,primecell";
546535 arm,primecell-periphid = <0x00051180>;
547536 status = "disabled";
@@ -556,7 +545,7 @@ · 8 unmodified lines
556545 cap-mmc-highspeed;
557546 };
558547
559− sdcc5: sdcc@12200000 {
548+ sdcc5: mmc@12200000 {
560549 compatible = "arm,pl18x", "arm,primecell";
561550 arm,primecell-periphid = <0x00051180>;
562551 status = "disabled";
arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts+3−0
@@ -0,0 +1,3 @@
1+// SPDX-License-Identifier: GPL-2.0-only
2+#include "arm64/qcom/msm8916-samsung-serranove.dts"
3+#include "qcom-msm8916-smp.dtsi"
arch/arm/boot/dts/qcom-msm8916-smp.dtsi+62−0
@@ -0,0 +1,62 @@
1+// SPDX-License-Identifier: GPL-2.0-only
2+
3+/ {
4+ cpus {
5+ cpu@0 {
6+ enable-method = "qcom,msm8916-smp";
7+ };
8+ cpu@1 {
9+ enable-method = "qcom,msm8916-smp";
10+ };
11+ cpu@2 {
12+ enable-method = "qcom,msm8916-smp";
13+ };
14+ cpu@3 {
15+ enable-method = "qcom,msm8916-smp";
16+ };
17+
18+ idle-states {
19+ /delete-property/ entry-method;
20+ };
21+ };
22+
23+ psci {
24+ status = "disabled";
25+ };
26+};
27+
28+&CPU_SLEEP_0 {
29+ compatible = "qcom,idle-state-spc";
30+};
31+
32+&cpu0_acc {
33+ status = "okay";
34+};
35+
36+&cpu0_saw {
37+ status = "okay";
38+};
39+
40+&cpu1_acc {
41+ status = "okay";
42+};
43+
44+&cpu1_saw {
45+ status = "okay";
46+};
47+
48+&cpu2_acc {
49+ status = "okay";
50+};
51+
52+&cpu2_saw {
53+ status = "okay";
54+};
55+
56+&cpu3_acc {
57+ status = "okay";
58+};
59+
60+&cpu3_saw {
61+ status = "okay";
62+};
arch/arm/boot/dts/qcom-msm8960-cdp.dts+2−2
@@ -26,12 +26,12 @@ · 25 unmodified lines
2626
2727 amba {
2828 /* eMMC */
29− sdcc1: sdcc@12400000 {
29+ sdcc1: mmc@12400000 {
3030 status = "okay";
3131 };
3232
3333 /* External micro SD card */
34− sdcc3: sdcc@12180000 {
34+ sdcc3: mmc@12180000 {
3535 status = "okay";
3636 };
3737 };
arch/arm/boot/dts/qcom-msm8960.dtsi+2−2
@@ -263,7 +263,7 @@ · 262 unmodified lines
263263 #address-cells = <1>;
264264 #size-cells = <1>;
265265 ranges;
266− sdcc1: sdcc@12400000 {
266+ sdcc1: mmc@12400000 {
267267 status = "disabled";
268268 compatible = "arm,pl18x", "arm,primecell";
269269 arm,primecell-periphid = <0x00051180>;
@@ -280,7 +280,7 @@ · 10 unmodified lines
280280 vmmc-supply = <&vsdcc_fixed>;
281281 };
282282
283− sdcc3: sdcc@12180000 {
283+ sdcc3: mmc@12180000 {
284284 compatible = "arm,pl18x", "arm,primecell";
285285 arm,primecell-periphid = <0x00051180>;
286286 status = "disabled";
arch/arm/boot/dts/qcom-msm8974.dtsi+8−8
@@ -142,7 +142,7 @@ · 141 unmodified lines
142142 };
143143
144144 thermal-zones {
145− cpu-thermal0 {
145+ cpu0-thermal {
146146 polling-delay-passive = <250>;
147147 polling-delay = <1000>;
148148
@@ -162,7 +162,7 @@ · 13 unmodified lines
162162 };
163163 };
164164
165− cpu-thermal1 {
165+ cpu1-thermal {
166166 polling-delay-passive = <250>;
167167 polling-delay = <1000>;
168168
@@ -182,7 +182,7 @@ · 13 unmodified lines
182182 };
183183 };
184184
185− cpu-thermal2 {
185+ cpu2-thermal {
186186 polling-delay-passive = <250>;
187187 polling-delay = <1000>;
188188
@@ -202,7 +202,7 @@ · 13 unmodified lines
202202 };
203203 };
204204
205− cpu-thermal3 {
205+ cpu3-thermal {
206206 polling-delay-passive = <250>;
207207 polling-delay = <1000>;
208208
@@ -282,7 +282,7 @@ · 73 unmodified lines
282282 };
283283 };
284284
285− gpu-thermal-top {
285+ gpu-top-thermal {
286286 polling-delay-passive = <250>;
287287 polling-delay = <1000>;
288288
@@ -297,7 +297,7 @@ · 8 unmodified lines
297297 };
298298 };
299299
300− gpu-thermal-bottom {
300+ gpu-bottom-thermal {
301301 polling-delay-passive = <250>;
302302 polling-delay = <1000>;
303303
@@ -1589,8 +1589,8 @@ · 1285 unmodified lines
15891589 #phy-cells = <0>;
15901590 qcom,dsi-phy-index = <0>;
15911591
1592− clocks = <&mmcc MDSS_AHB_CLK>;
1593− clock-names = "iface";
1592+ clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
1593+ clock-names = "iface", "ref";
15941594 };
15951595 };
15961596
arch/arm/boot/dts/qcom-pm8226.dtsi+27−0
@@ -0,0 +1,27 @@
1+// SPDX-License-Identifier: BSD-3-Clause
2+#include <dt-bindings/interrupt-controller/irq.h>
3+#include <dt-bindings/spmi/spmi.h>
4+
5+&spmi_bus {
6+ pm8226_0: pm8226@0 {
7+ compatible = "qcom,pm8226", "qcom,spmi-pmic";
8+ reg = <0x0 SPMI_USID>;
9+ #address-cells = <1>;
10+ #size-cells = <0>;
11+
12+ pwrkey@800 {
13+ compatible = "qcom,pm8941-pwrkey";
14+ reg = <0x800>;
15+ interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
16+ debounce = <15625>;
17+ bias-pull-up;
18+ };
19+ };
20+
21+ pm8226_1: pm8226@1 {
22+ compatible = "qcom,pm8226", "qcom,spmi-pmic";
23+ reg = <0x1 SPMI_USID>;
24+ #address-cells = <1>;
25+ #size-cells = <0>;
26+ };
27+};
arch/arm/boot/dts/qcom-pm8841.dtsi+3−4
@@ -15,10 +15,9 @@ · 14 unmodified lines
1515 reg = <0xa000>;
1616 gpio-controller;
1717 #gpio-cells = <2>;
18− interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
19− <4 0xa1 0 IRQ_TYPE_NONE>,
20− <4 0xa2 0 IRQ_TYPE_NONE>,
21− <4 0xa3 0 IRQ_TYPE_NONE>;
18+ gpio-ranges = <&pm8841_mpps 0 0 4>;
19+ interrupt-controller;
20+ #interrupt-cells = <2>;
2221 };
2322
2423 temp-alarm@2400 {
arch/arm/boot/dts/qcom-pm8941.dtsi+3−8
@@ -79,14 +79,9 @@ · 78 unmodified lines
7979 reg = <0xa000>;
8080 gpio-controller;
8181 #gpio-cells = <2>;
82− interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
83− <0 0xa1 0 IRQ_TYPE_NONE>,
84− <0 0xa2 0 IRQ_TYPE_NONE>,
85− <0 0xa3 0 IRQ_TYPE_NONE>,
86− <0 0xa4 0 IRQ_TYPE_NONE>,
87− <0 0xa5 0 IRQ_TYPE_NONE>,
88− <0 0xa6 0 IRQ_TYPE_NONE>,
89− <0 0xa7 0 IRQ_TYPE_NONE>;
82+ gpio-ranges = <&pm8941_mpps 0 0 8>;
83+ interrupt-controller;
84+ #interrupt-cells = <2>;
9085 };
9186
9287 pm8941_temp: temp-alarm@2400 {
arch/arm/boot/dts/qcom-pma8084.dtsi+3−8
@@ -42,14 +42,9 @@ · 41 unmodified lines
4242 reg = <0xa000>;
4343 gpio-controller;
4444 #gpio-cells = <2>;
45− interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
46− <0 0xa1 0 IRQ_TYPE_NONE>,
47− <0 0xa2 0 IRQ_TYPE_NONE>,
48− <0 0xa3 0 IRQ_TYPE_NONE>,
49− <0 0xa4 0 IRQ_TYPE_NONE>,
50− <0 0xa5 0 IRQ_TYPE_NONE>,
51− <0 0xa6 0 IRQ_TYPE_NONE>,
52− <0 0xa7 0 IRQ_TYPE_NONE>;
45+ gpio-ranges = <&pma8084_mpps 0 0 8>;
46+ interrupt-controller;
47+ #interrupt-cells = <2>;
5348 };
5449
5550 pma8084_temp: temp-alarm@2400 {
arch/arm/boot/dts/qcom-sdx55.dtsi+0−1
@@ -228,7 +228,6 @@ · 227 unmodified lines
228228 compatible = "qcom,sdx55-qmp-usb3-uni-phy";
229229 reg = <0x00ff6000 0x1c0>;
230230 status = "disabled";
231− #clock-cells = <1>;
232231 #address-cells = <1>;
233232 #size-cells = <1>;
234233 ranges;
arch/arm/boot/dts/r7s72100-genmai.dts+2−0
@@ -108,6 +108,8 @@ · 107 unmodified lines
108108 renesas,no-ether-link;
109109 phy-handle = <&phy0>;
110110 phy0: ethernet-phy@0 {
111+ compatible = "ethernet-phy-idb824.2814",
112+ "ethernet-phy-ieee802.3-c22";
111113 reg = <0>;
112114 };
113115 };
arch/arm/boot/dts/r7s72100-gr-peach.dts+2−0
@@ -129,6 +129,8 @@ · 128 unmodified lines
129129 phy-handle = <&phy0>;
130130
131131 phy0: ethernet-phy@0 {
132+ compatible = "ethernet-phy-id0007.c0f0",
133+ "ethernet-phy-ieee802.3-c22";
132134 reg = <0>;
133135
134136 reset-gpios = <&port4 2 GPIO_ACTIVE_LOW>;
arch/arm/boot/dts/r7s72100-rskrza1.dts+2−0
@@ -192,6 +192,8 @@ · 191 unmodified lines
192192 renesas,no-ether-link;
193193 phy-handle = <&phy0>;
194194 phy0: ethernet-phy@0 {
195+ compatible = "ethernet-phy-idb824.2814",
196+ "ethernet-phy-ieee802.3-c22";
195197 reg = <0>;
196198 };
197199 };
arch/arm/boot/dts/r7s9210-rza2mevb.dts+21−0
@@ -100,6 +100,8 @@ · 99 unmodified lines
100100 renesas,no-ether-link;
101101 phy-handle = <&phy1>;
102102 phy1: ethernet-phy@1 {
103+ compatible = "ethernet-phy-id001c.c816",
104+ "ethernet-phy-ieee802.3-c22";
103105 reg = <0>;
104106 };
105107 };
@@ -109,6 +111,20 @@ · 3 unmodified lines
109111 clock-frequency = <24000000>; /* 24MHz */
110112 };
111113
114+&i2c3 {
115+ status = "okay";
116+ clock-frequency = <400000>;
117+
118+ pinctrl-names = "default";
119+ pinctrl-0 = <&i2c3_pins>;
120+
121+ eeprom@50 {
122+ compatible = "renesas,r1ex24128", "atmel,24c128";
123+ reg = <0x50>;
124+ pagesize = <64>;
125+ };
126+};
127+
112128 /* High resolution System tick timers */
113129 &ostm0 {
114130 status = "okay";
@@ -147,6 +163,11 @@ · 32 unmodified lines
147163 <RZA2_PINMUX(PORTL, 1, 5)>; /* IRQ5 */
148164 };
149165
166+ i2c3_pins: i2c3 {
167+ pinmux = <RZA2_PINMUX(PORTD, 6, 1)>, /* RIIC3SCL */
168+ <RZA2_PINMUX(PORTD, 7, 1)>; /* RIIC3SDA */
169+ };
170+
150171 keyboard_pins: keyboard {
151172 pinmux = <RZA2_PINMUX(PORTJ, 1, 6)>; /* IRQ0 */
152173 };
arch/arm/boot/dts/r8a73a4-ape6evm.dts+1−0
@@ -199,6 +199,7 @@ · 198 unmodified lines
199199 reg-io-width = <4>;
200200 smsc,irq-active-high;
201201 smsc,irq-push-pull;
202+ reset-gpios = <&pfc 270 GPIO_ACTIVE_LOW>;
202203 vdd33a-supply = <&ape6evm_fixed_3v3>;
203204 vddvario-supply = <&ape6evm_fixed_1v8>;
204205 };
arch/arm/boot/dts/r8a7740-armadillo800eva.dts+3−0
@@ -170,7 +170,10 @@ · 169 unmodified lines
170170 status = "okay";
171171
172172 phy0: ethernet-phy@0 {
173+ compatible = "ethernet-phy-id0007.c0f1",
174+ "ethernet-phy-ieee802.3-c22";
173175 reg = <0>;
176+ reset-gpios = <&pfc 18 GPIO_ACTIVE_LOW>;
174177 };
175178 };
176179
arch/arm/boot/dts/r8a7742-iwg21d-q7-dbcm-ca.dts+2−0
@@ -66,6 +66,8 @@ · 65 unmodified lines
6666 status = "okay";
6767
6868 phy1: ethernet-phy@1 {
69+ compatible = "ethernet-phy-id0022.1560",
70+ "ethernet-phy-ieee802.3-c22";
6971 reg = <1>;
7072 micrel,led-mode = <1>;
7173 };
arch/arm/boot/dts/r8a7742-iwg21d-q7.dts+2−0
@@ -175,6 +175,8 @@ · 174 unmodified lines
175175 status = "okay";
176176
177177 phy3: ethernet-phy@3 {
178+ compatible = "ethernet-phy-id0022.1622",
179+ "ethernet-phy-ieee802.3-c22";
178180 reg = <3>;
179181 micrel,led-mode = <1>;
180182 };
arch/arm/boot/dts/r8a7743-sk-rzg1m.dts+4−0
@@ -7,6 +7,7 @@ · 6 unmodified lines
77
88 /dts-v1/;
99 #include "r8a7743.dtsi"
10+#include <dt-bindings/gpio/gpio.h>
1011
1112 / {
1213 model = "SK-RZG1M";
@@ -69,9 +70,12 @@ · 56 unmodified lines
6970 status = "okay";
7071
7172 phy1: ethernet-phy@1 {
73+ compatible = "ethernet-phy-id0022.1537",
74+ "ethernet-phy-ieee802.3-c22";
7275 reg = <1>;
7376 interrupt-parent = <&irqc>;
7477 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
7578 micrel,led-mode = <1>;
79+ reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
7680 };
7781 };
arch/arm/boot/dts/r8a7745-iwg22d-sodimm.dts+2−0
@@ -123,6 +123,8 @@ · 122 unmodified lines
123123 * On some older versions of the platform (before R4.0) the phy address
124124 * may be 1 or 3. The address is fixed to 3 for R4.0 onwards.
125125 */
126+ compatible = "ethernet-phy-id0022.1622",
127+ "ethernet-phy-ieee802.3-c22";
126128 reg = <3>;
127129 micrel,led-mode = <1>;
128130 };
arch/arm/boot/dts/r8a7745-sk-rzg1e.dts+4−0
@@ -7,6 +7,7 @@ · 6 unmodified lines
77
88 /dts-v1/;
99 #include "r8a7745.dtsi"
10+#include <dt-bindings/gpio/gpio.h>
1011
1112 / {
1213 model = "SK-RZG1E";
@@ -64,9 +65,12 @@ · 51 unmodified lines
6465 status = "okay";
6566
6667 phy1: ethernet-phy@1 {
68+ compatible = "ethernet-phy-id0022.1537",
69+ "ethernet-phy-ieee802.3-c22";
6770 reg = <1>;
6871 interrupt-parent = <&irqc>;
6972 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
7073 micrel,led-mode = <1>;
74+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
7175 };
7276 };
arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts+2−0
@@ -79,6 +79,8 @@ · 78 unmodified lines
7979 status = "okay";
8080
8181 phy3: ethernet-phy@3 {
82+ compatible = "ethernet-phy-id0022.1622",
83+ "ethernet-phy-ieee802.3-c22";
8284 reg = <3>;
8385 interrupt-parent = <&gpio5>;
8486 interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7778-bockw.dts+1−1
@@ -63,7 +63,7 @@ · 62 unmodified lines
6363
6464 &bsc {
6565 ethernet@18300000 {
66− compatible = "smsc,lan9220", "smsc,lan9115";
66+ compatible = "smsc,lan89218", "smsc,lan9115";
6767 reg = <0x18300000 0x1000>;
6868
6969 phy-mode = "mii";
arch/arm/boot/dts/r8a7779-marzen.dts+1−1
@@ -52,7 +52,7 @@ · 51 unmodified lines
5252 };
5353
5454 ethernet@18000000 {
55− compatible = "smsc,lan9220", "smsc,lan9115";
55+ compatible = "smsc,lan89218", "smsc,lan9115";
5656 reg = <0x18000000 0x100>;
5757 pinctrl-0 = <&ethernet_pins>;
5858 pinctrl-names = "default";
arch/arm/boot/dts/r8a7790-lager.dts+2−0
@@ -678,6 +678,8 @@ · 677 unmodified lines
678678 status = "okay";
679679
680680 phy1: ethernet-phy@1 {
681+ compatible = "ethernet-phy-id0022.1537",
682+ "ethernet-phy-ieee802.3-c22";
681683 reg = <1>;
682684 interrupt-parent = <&irqc0>;
683685 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7790-stout.dts+2−0
@@ -199,6 +199,8 @@ · 198 unmodified lines
199199 status = "okay";
200200
201201 phy1: ethernet-phy@1 {
202+ compatible = "ethernet-phy-id0022.1537",
203+ "ethernet-phy-ieee802.3-c22";
202204 reg = <1>;
203205 interrupt-parent = <&irqc0>;
204206 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7791-koelsch.dts+2−0
@@ -637,6 +637,8 @@ · 636 unmodified lines
637637 status = "okay";
638638
639639 phy1: ethernet-phy@1 {
640+ compatible = "ethernet-phy-id0022.1537",
641+ "ethernet-phy-ieee802.3-c22";
640642 reg = <1>;
641643 interrupt-parent = <&irqc0>;
642644 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7791-porter.dts+2−0
@@ -302,6 +302,8 @@ · 301 unmodified lines
302302 status = "okay";
303303
304304 phy1: ethernet-phy@1 {
305+ compatible = "ethernet-phy-id0022.1537",
306+ "ethernet-phy-ieee802.3-c22";
305307 reg = <1>;
306308 interrupt-parent = <&irqc0>;
307309 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7793-gose.dts+2−0
@@ -595,6 +595,8 @@ · 594 unmodified lines
595595 status = "okay";
596596
597597 phy1: ethernet-phy@1 {
598+ compatible = "ethernet-phy-id0022.1537",
599+ "ethernet-phy-ieee802.3-c22";
598600 reg = <1>;
599601 interrupt-parent = <&irqc0>;
600602 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7794-alt.dts+2−0
@@ -383,6 +383,8 @@ · 382 unmodified lines
383383 status = "okay";
384384
385385 phy1: ethernet-phy@1 {
386+ compatible = "ethernet-phy-id0022.1537",
387+ "ethernet-phy-ieee802.3-c22";
386388 reg = <1>;
387389 interrupt-parent = <&irqc0>;
388390 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/r8a7794-silk.dts+2−0
@@ -397,6 +397,8 @@ · 396 unmodified lines
397397 status = "okay";
398398
399399 phy1: ethernet-phy@1 {
400+ compatible = "ethernet-phy-id0022.1537",
401+ "ethernet-phy-ieee802.3-c22";
400402 reg = <1>;
401403 interrupt-parent = <&irqc0>;
402404 interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
arch/arm/boot/dts/rk3036.dtsi+5−5
@@ -416,8 +416,8 @@ · 415 unmodified lines
416416 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer";
417417 reg = <0x20044000 0x20>;
418418 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
419− clocks = <&xin24m>, <&cru PCLK_TIMER>;
420− clock-names = "timer", "pclk";
419+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
420+ clock-names = "pclk", "timer";
421421 };
422422
423423 pwm0: pwm@20050000 {
@@ -575,7 +575,7 @@ · 151 unmodified lines
575575 #size-cells = <1>;
576576 ranges;
577577
578− gpio0: gpio0@2007c000 {
578+ gpio0: gpio@2007c000 {
579579 compatible = "rockchip,gpio-bank";
580580 reg = <0x2007c000 0x100>;
581581 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
@@ -588,7 +588,7 @@ · 6 unmodified lines
588588 #interrupt-cells = <2>;
589589 };
590590
591− gpio1: gpio1@20080000 {
591+ gpio1: gpio@20080000 {
592592 compatible = "rockchip,gpio-bank";
593593 reg = <0x20080000 0x100>;
594594 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
@@ -601,7 +601,7 @@ · 6 unmodified lines
601601 #interrupt-cells = <2>;
602602 };
603603
604− gpio2: gpio2@20084000 {
604+ gpio2: gpio@20084000 {
605605 compatible = "rockchip,gpio-bank";
606606 reg = <0x20084000 0x100>;
607607 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rk3066a-mk808.dts+27−0
@@ -4,6 +4,7 @@ · 3 unmodified lines
44 */
55
66 /dts-v1/;
7+#include <dt-bindings/input/input.h>
78 #include "rk3066a.dtsi"
89
910 / {
@@ -24,6 +25,20 @@ · 14 unmodified lines
2425 device_type = "memory";
2526 };
2627
28+ adc-keys {
29+ compatible = "adc-keys";
30+ io-channels = <&saradc 1>;
31+ io-channel-names = "buttons";
32+ keyup-threshold-microvolt = <2500000>;
33+ poll-interval = <100>;
34+
35+ recovery {
36+ label = "recovery";
37+ linux,code = <KEY_VENDOR>;
38+ press-threshold-microvolt = <0>;
39+ };
40+ };
41+
2742 gpio-leds {
2843 compatible = "gpio-leds";
2944
@@ -46,6 +61,13 @@ · 16 unmodified lines
4661 };
4762 };
4863
64+ vcc_2v5: vcc-2v5 {
65+ compatible = "regulator-fixed";
66+ regulator-name = "vcc_2v5";
67+ regulator-min-microvolt = <2500000>;
68+ regulator-max-microvolt = <2500000>;
69+ };
70+
4971 vcc_io: vcc-io {
5072 compatible = "regulator-fixed";
5173 regulator-name = "vcc_io";
@@ -164,6 +186,11 @@ · 112 unmodified lines
164186 };
165187 };
166188
189+&saradc {
190+ vref-supply = <&vcc_2v5>;
191+ status = "okay";
192+};
193+
167194 &uart2 {
168195 status = "okay";
169196 };
arch/arm/boot/dts/rk3066a.dtsi+15−17
@@ -23,16 +23,15 @@ · 22 unmodified lines
2323 compatible = "arm,cortex-a9";
2424 next-level-cache = <&L2>;
2525 reg = <0x0>;
26− operating-points = <
26+ operating-points =
2727 /* kHz uV */
28− 1416000 1300000
29− 1200000 1175000
30− 1008000 1125000
31− 816000 1125000
32− 600000 1100000
33− 504000 1100000
34− 312000 1075000
35− >;
28+ <1416000 1300000>,
29+ <1200000 1175000>,
30+ <1008000 1125000>,
31+ <816000 1125000>,
32+ <600000 1100000>,
33+ <504000 1100000>,
34+ <312000 1075000>;
3635 clock-latency = <40000>;
3736 clocks = <&cru ARMCLK>;
3837 };
@@ -273,7 +272,7 @@ · 234 unmodified lines
273272 #size-cells = <1>;
274273 ranges;
275274
276− gpio0: gpio0@20034000 {
275+ gpio0: gpio@20034000 {
277276 compatible = "rockchip,gpio-bank";
278277 reg = <0x20034000 0x100>;
279278 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -286,7 +285,7 @@ · 6 unmodified lines
286285 #interrupt-cells = <2>;
287286 };
288287
289− gpio1: gpio1@2003c000 {
288+ gpio1: gpio@2003c000 {
290289 compatible = "rockchip,gpio-bank";
291290 reg = <0x2003c000 0x100>;
292291 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -299,7 +298,7 @@ · 6 unmodified lines
299298 #interrupt-cells = <2>;
300299 };
301300
302− gpio2: gpio2@2003e000 {
301+ gpio2: gpio@2003e000 {
303302 compatible = "rockchip,gpio-bank";
304303 reg = <0x2003e000 0x100>;
305304 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -312,7 +311,7 @@ · 6 unmodified lines
312311 #interrupt-cells = <2>;
313312 };
314313
315− gpio3: gpio3@20080000 {
314+ gpio3: gpio@20080000 {
316315 compatible = "rockchip,gpio-bank";
317316 reg = <0x20080000 0x100>;
318317 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -325,7 +324,7 @@ · 6 unmodified lines
325324 #interrupt-cells = <2>;
326325 };
327326
328− gpio4: gpio4@20084000 {
327+ gpio4: gpio@20084000 {
329328 compatible = "rockchip,gpio-bank";
330329 reg = <0x20084000 0x100>;
331330 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
@@ -338,7 +337,7 @@ · 6 unmodified lines
338337 #interrupt-cells = <2>;
339338 };
340339
341− gpio6: gpio6@2000a000 {
340+ gpio6: gpio@2000a000 {
342341 compatible = "rockchip,gpio-bank";
343342 reg = <0x2000a000 0x100>;
344343 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
@@ -682,8 +681,7 @@ · 337 unmodified lines
682681 compatible = "rockchip,rk3066-grf", "syscon", "simple-mfd";
683682
684683 usbphy: usbphy {
685− compatible = "rockchip,rk3066a-usb-phy",
686− "rockchip,rk3288-usb-phy";
684+ compatible = "rockchip,rk3066a-usb-phy";
687685 #address-cells = <1>;
688686 #size-cells = <0>;
689687 status = "disabled";
arch/arm/boot/dts/rk3188.dtsi+6−7
@@ -54,7 +54,7 @@ · 53 unmodified lines
5454 };
5555 };
5656
57− cpu0_opp_table: opp_table0 {
57+ cpu0_opp_table: opp-table-0 {
5858 compatible = "operating-points-v2";
5959 opp-shared;
6060
@@ -223,7 +223,7 @@ · 162 unmodified lines
223223 #size-cells = <1>;
224224 ranges;
225225
226− gpio0: gpio0@2000a000 {
226+ gpio0: gpio@2000a000 {
227227 compatible = "rockchip,rk3188-gpio-bank0";
228228 reg = <0x2000a000 0x100>;
229229 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
@@ -236,7 +236,7 @@ · 6 unmodified lines
236236 #interrupt-cells = <2>;
237237 };
238238
239− gpio1: gpio1@2003c000 {
239+ gpio1: gpio@2003c000 {
240240 compatible = "rockchip,gpio-bank";
241241 reg = <0x2003c000 0x100>;
242242 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
@@ -249,7 +249,7 @@ · 6 unmodified lines
249249 #interrupt-cells = <2>;
250250 };
251251
252− gpio2: gpio2@2003e000 {
252+ gpio2: gpio@2003e000 {
253253 compatible = "rockchip,gpio-bank";
254254 reg = <0x2003e000 0x100>;
255255 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
@@ -262,7 +262,7 @@ · 6 unmodified lines
262262 #interrupt-cells = <2>;
263263 };
264264
265− gpio3: gpio3@20080000 {
265+ gpio3: gpio@20080000 {
266266 compatible = "rockchip,gpio-bank";
267267 reg = <0x20080000 0x100>;
268268 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
@@ -647,8 +647,7 @@ · 378 unmodified lines
647647 };
648648
649649 usbphy: usbphy {
650− compatible = "rockchip,rk3188-usb-phy",
651− "rockchip,rk3288-usb-phy";
650+ compatible = "rockchip,rk3188-usb-phy";
652651 #address-cells = <1>;
653652 #size-cells = <0>;
654653 status = "disabled";
arch/arm/boot/dts/rk3229.dtsi+1−1
@@ -10,7 +10,7 @@ · 9 unmodified lines
1010
1111 /delete-node/ opp-table0;
1212
13− cpu0_opp_table: opp_table0 {
13+ cpu0_opp_table: opp-table-0 {
1414 compatible = "operating-points-v2";
1515 opp-shared;
1616
arch/arm/boot/dts/rk322x.dtsi+7−7
@@ -68,7 +68,7 @@ · 67 unmodified lines
6868 };
6969 };
7070
71− cpu0_opp_table: opp_table0 {
71+ cpu0_opp_table: opp-table-0 {
7272 compatible = "operating-points-v2";
7373 opp-shared;
7474
@@ -477,8 +477,8 @@ · 402 unmodified lines
477477 compatible = "rockchip,rk3228-timer", "rockchip,rk3288-timer";
478478 reg = <0x110c0000 0x20>;
479479 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
480− clocks = <&xin24m>, <&cru PCLK_TIMER>;
481− clock-names = "timer", "pclk";
480+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
481+ clock-names = "pclk", "timer";
482482 };
483483
484484 cru: clock-controller@110e0000 {
@@ -946,7 +946,7 @@ · 461 unmodified lines
946946 #size-cells = <1>;
947947 ranges;
948948
949− gpio0: gpio0@11110000 {
949+ gpio0: gpio@11110000 {
950950 compatible = "rockchip,gpio-bank";
951951 reg = <0x11110000 0x100>;
952952 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
@@ -959,7 +959,7 @@ · 6 unmodified lines
959959 #interrupt-cells = <2>;
960960 };
961961
962− gpio1: gpio1@11120000 {
962+ gpio1: gpio@11120000 {
963963 compatible = "rockchip,gpio-bank";
964964 reg = <0x11120000 0x100>;
965965 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
@@ -972,7 +972,7 @@ · 6 unmodified lines
972972 #interrupt-cells = <2>;
973973 };
974974
975− gpio2: gpio2@11130000 {
975+ gpio2: gpio@11130000 {
976976 compatible = "rockchip,gpio-bank";
977977 reg = <0x11130000 0x100>;
978978 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -985,7 +985,7 @@ · 6 unmodified lines
985985 #interrupt-cells = <2>;
986986 };
987987
988− gpio3: gpio3@11140000 {
988+ gpio3: gpio@11140000 {
989989 compatible = "rockchip,gpio-bank";
990990 reg = <0x11140000 0x100>;
991991 interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rk3288.dtsi+11−11
@@ -100,7 +100,7 @@ · 99 unmodified lines
100100 };
101101 };
102102
103− cpu_opp_table: cpu-opp-table {
103+ cpu_opp_table: opp-table-0 {
104104 compatible = "operating-points-v2";
105105 opp-shared;
106106
@@ -1278,7 +1278,7 @@ · 1171 unmodified lines
12781278 status = "disabled";
12791279 };
12801280
1281− gpu_opp_table: gpu-opp-table {
1281+ gpu_opp_table: opp-table-1 {
12821282 compatible = "operating-points-v2";
12831283
12841284 opp-100000000 {
@@ -1422,7 +1422,7 @@ · 137 unmodified lines
14221422 #size-cells = <2>;
14231423 ranges;
14241424
1425− gpio0: gpio0@ff750000 {
1425+ gpio0: gpio@ff750000 {
14261426 compatible = "rockchip,gpio-bank";
14271427 reg = <0x0 0xff750000 0x0 0x100>;
14281428 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
@@ -1435,7 +1435,7 @@ · 6 unmodified lines
14351435 #interrupt-cells = <2>;
14361436 };
14371437
1438− gpio1: gpio1@ff780000 {
1438+ gpio1: gpio@ff780000 {
14391439 compatible = "rockchip,gpio-bank";
14401440 reg = <0x0 0xff780000 0x0 0x100>;
14411441 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
@@ -1448,7 +1448,7 @@ · 6 unmodified lines
14481448 #interrupt-cells = <2>;
14491449 };
14501450
1451− gpio2: gpio2@ff790000 {
1451+ gpio2: gpio@ff790000 {
14521452 compatible = "rockchip,gpio-bank";
14531453 reg = <0x0 0xff790000 0x0 0x100>;
14541454 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
@@ -1461,7 +1461,7 @@ · 6 unmodified lines
14611461 #interrupt-cells = <2>;
14621462 };
14631463
1464− gpio3: gpio3@ff7a0000 {
1464+ gpio3: gpio@ff7a0000 {
14651465 compatible = "rockchip,gpio-bank";
14661466 reg = <0x0 0xff7a0000 0x0 0x100>;
14671467 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
@@ -1474,7 +1474,7 @@ · 6 unmodified lines
14741474 #interrupt-cells = <2>;
14751475 };
14761476
1477− gpio4: gpio4@ff7b0000 {
1477+ gpio4: gpio@ff7b0000 {
14781478 compatible = "rockchip,gpio-bank";
14791479 reg = <0x0 0xff7b0000 0x0 0x100>;
14801480 interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
@@ -1487,7 +1487,7 @@ · 6 unmodified lines
14871487 #interrupt-cells = <2>;
14881488 };
14891489
1490− gpio5: gpio5@ff7c0000 {
1490+ gpio5: gpio@ff7c0000 {
14911491 compatible = "rockchip,gpio-bank";
14921492 reg = <0x0 0xff7c0000 0x0 0x100>;
14931493 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
@@ -1500,7 +1500,7 @@ · 6 unmodified lines
15001500 #interrupt-cells = <2>;
15011501 };
15021502
1503− gpio6: gpio6@ff7d0000 {
1503+ gpio6: gpio@ff7d0000 {
15041504 compatible = "rockchip,gpio-bank";
15051505 reg = <0x0 0xff7d0000 0x0 0x100>;
15061506 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
@@ -1513,7 +1513,7 @@ · 6 unmodified lines
15131513 #interrupt-cells = <2>;
15141514 };
15151515
1516− gpio7: gpio7@ff7e0000 {
1516+ gpio7: gpio@ff7e0000 {
15171517 compatible = "rockchip,gpio-bank";
15181518 reg = <0x0 0xff7e0000 0x0 0x100>;
15191519 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
@@ -1526,7 +1526,7 @@ · 6 unmodified lines
15261526 #interrupt-cells = <2>;
15271527 };
15281528
1529− gpio8: gpio8@ff7f0000 {
1529+ gpio8: gpio@ff7f0000 {
15301530 compatible = "rockchip,gpio-bank";
15311531 reg = <0x0 0xff7f0000 0x0 0x100>;
15321532 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/rv1108.dtsi+8−8
@@ -40,7 +40,7 @@ · 39 unmodified lines
4040 };
4141 };
4242
43− cpu_opp_table: opp_table {
43+ cpu_opp_table: opp-table-0 {
4444 compatible = "operating-points-v2";
4545
4646 opp-408000000 {
@@ -300,8 +300,8 @@ · 253 unmodified lines
300300 compatible = "rockchip,rv1108-timer", "rockchip,rk3288-timer";
301301 reg = <0x10350000 0x20>;
302302 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
303− clocks = <&xin24m>, <&cru PCLK_TIMER>;
304− clock-names = "timer", "pclk";
303+ clocks = <&cru PCLK_TIMER>, <&xin24m>;
304+ clock-names = "pclk", "timer";
305305 };
306306
307307 watchdog: watchdog@10360000 {
@@ -557,7 +557,7 @@ · 249 unmodified lines
557557 status = "disabled";
558558 };
559559
560− gmac: eth@30200000 {
560+ gmac: ethernet@30200000 {
561561 compatible = "rockchip,rv1108-gmac";
562562 reg = <0x30200000 0x10000>;
563563 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
@@ -600,7 +600,7 @@ · 36 unmodified lines
600600 #size-cells = <1>;
601601 ranges;
602602
603− gpio0: gpio0@20030000 {
603+ gpio0: gpio@20030000 {
604604 compatible = "rockchip,gpio-bank";
605605 reg = <0x20030000 0x100>;
606606 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
@@ -613,7 +613,7 @@ · 6 unmodified lines
613613 #interrupt-cells = <2>;
614614 };
615615
616− gpio1: gpio1@10310000 {
616+ gpio1: gpio@10310000 {
617617 compatible = "rockchip,gpio-bank";
618618 reg = <0x10310000 0x100>;
619619 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
@@ -626,7 +626,7 @@ · 6 unmodified lines
626626 #interrupt-cells = <2>;
627627 };
628628
629− gpio2: gpio2@10320000 {
629+ gpio2: gpio@10320000 {
630630 compatible = "rockchip,gpio-bank";
631631 reg = <0x10320000 0x100>;
632632 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
@@ -639,7 +639,7 @@ · 6 unmodified lines
639639 #interrupt-cells = <2>;
640640 };
641641
642− gpio3: gpio3@10330000 {
642+ gpio3: gpio@10330000 {
643643 compatible = "rockchip,gpio-bank";
644644 reg = <0x10330000 0x100>;
645645 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
arch/arm/boot/dts/s5pv210-fascinate4g.dts+1−0
@@ -8,6 +8,7 @@ · 7 unmodified lines
88 / {
99 model = "Samsung Galaxy S Fascinate 4G (SGH-T959P) based on S5PV210";
1010 compatible = "samsung,fascinate4g", "samsung,aries", "samsung,s5pv210";
11+ chassis-type = "handset";
1112
1213 chosen {
1314 stdout-path = &uart2;
arch/arm/boot/dts/s5pv210-galaxys.dts+1−0
@@ -8,6 +8,7 @@ · 7 unmodified lines
88 / {
99 model = "Samsung Galaxy S1 (GT-I9000) based on S5PV210";
1010 compatible = "samsung,galaxys", "samsung,aries", "samsung,s5pv210";
11+ chassis-type = "handset";
1112
1213 chosen {
1314 stdout-path = &uart2;
arch/arm/boot/dts/sama5d29.dtsi+16−0
@@ -0,0 +1,16 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+/*
3+ * sama5d29.dtsi - Device Tree Include file for SAMA5D29 SoC of the SAMA5D2
4+ * family.
5+ *
6+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
7+ *
8+ * Author: Hari Prasath <Hari.PrasathGE@microchip.com>
9+ *
10+ */
11+
12+#include "sama5d2.dtsi"
13+
14+&macb0 {
15+ compatible = "atmel,sama5d29-gem";
16+};
arch/arm/boot/dts/sama7g5.dtsi+43−0
@@ -152,6 +152,13 @@ · 151 unmodified lines
152152 reg = <0xe001d060 0x48>;
153153 };
154154
155+ rtc: rtc@e001d0a8 {
156+ compatible = "microchip,sama7g5-rtc", "microchip,sam9x60-rtc";
157+ reg = <0xe001d0a8 0x30>;
158+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
159+ clocks = <&clk32k 1>;
160+ };
161+
155162 ps_wdt: watchdog@e001d180 {
156163 compatible = "microchip,sama7g5-wdt";
157164 reg = <0xe001d180 0x24>;
@@ -164,6 +171,32 @@ · 6 unmodified lines
164171 reg = <0xe0020000 0x8>;
165172 };
166173
174+ tcb1: timer@e0800000 {
175+ compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
176+ #address-cells = <1>;
177+ #size-cells = <0>;
178+ reg = <0xe0800000 0x100>;
179+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
180+ clocks = <&pmc PMC_TYPE_PERIPHERAL 91>, <&pmc PMC_TYPE_PERIPHERAL 92>, <&pmc PMC_TYPE_PERIPHERAL 93>, <&clk32k 1>;
181+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
182+ };
183+
184+ adc: adc@e1000000 {
185+ compatible = "microchip,sama7g5-adc";
186+ reg = <0xe1000000 0x200>;
187+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
188+ clocks = <&pmc PMC_TYPE_GCK 26>;
189+ assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
190+ assigned-clock-rates = <100000000>;
191+ clock-names = "adc_clk";
192+ dmas = <&dma0 AT91_XDMAC_DT_PERID(0)>;
193+ dma-names = "rx";
194+ atmel,min-sample-rate-hz = <200000>;
195+ atmel,max-sample-rate-hz = <20000000>;
196+ atmel,startup-time-ms = <4>;
197+ status = "disabled";
198+ };
199+
167200 sdmmc0: mmc@e1204000 {
168201 compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
169202 reg = <0xe1204000 0x4000>;
@@ -465,6 +498,16 @@ · 295 unmodified lines
465498 status = "disabled";
466499 };
467500
501+ tcb0: timer@e2814000 {
502+ compatible = "atmel,sama5d2-tcb", "simple-mfd", "syscon";
503+ #address-cells = <1>;
504+ #size-cells = <0>;
505+ reg = <0xe2814000 0x100>;
506+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
507+ clocks = <&pmc PMC_TYPE_PERIPHERAL 88>, <&pmc PMC_TYPE_PERIPHERAL 89>, <&pmc PMC_TYPE_PERIPHERAL 90>, <&clk32k 1>;
508+ clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
509+ };
510+
468511 flx8: flexcom@e2818000 {
469512 compatible = "atmel,sama5d2-flexcom";
470513 reg = <0xe2818000 0x200>;
arch/arm/boot/dts/sh73a0-kzm9g.dts+1−1
@@ -169,7 +169,7 @@ · 168 unmodified lines
169169
170170 &bsc {
171171 ethernet@10000000 {
172− compatible = "smsc,lan9220", "smsc,lan9115";
172+ compatible = "smsc,lan9221", "smsc,lan9115";
173173 reg = <0x10000000 0x100>;
174174 phy-mode = "mii";
175175 interrupt-parent = <&irqpin0>;
arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dts+112−0
@@ -0,0 +1,112 @@
1+// SPDX-License-Identifier: GPL-2.0
2+/dts-v1/;
3+
4+#include "socfpga_arria10.dtsi"
5+
6+/ {
7+
8+ model = "Enclustra Mercury AA1";
9+ compatible = "altr,socfpga-arria10", "altr,socfpga";
10+
11+ aliases {
12+ ethernet0 = &gmac0;
13+ serial1 = &uart1;
14+ i2c0 = &i2c0;
15+ i2c1 = &i2c1;
16+ };
17+
18+ memory@0 {
19+ name = "memory";
20+ device_type = "memory";
21+ reg = <0x0 0x80000000>; /* 2GB */
22+ };
23+
24+ chosen {
25+ stdout-path = "serial1:115200n8";
26+ };
27+};
28+
29+&eccmgr {
30+ sdmmca-ecc@ff8c2c00 {
31+ compatible = "altr,socfpga-sdmmc-ecc";
32+ reg = <0xff8c2c00 0x400>;
33+ altr,ecc-parent = <&mmc>;
34+ interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
35+ <47 IRQ_TYPE_LEVEL_HIGH>,
36+ <16 IRQ_TYPE_LEVEL_HIGH>,
37+ <48 IRQ_TYPE_LEVEL_HIGH>;
38+ };
39+};
40+
41+&gmac0 {
42+ phy-mode = "rgmii";
43+ phy-addr = <0xffffffff>; /* probe for phy addr */
44+
45+ max-frame-size = <3800>;
46+ status = "okay";
47+
48+ phy-handle = <&phy3>;
49+
50+ mdio {
51+ #address-cells = <1>;
52+ #size-cells = <0>;
53+ compatible = "snps,dwmac-mdio";
54+ phy3: ethernet-phy@3 {
55+ txd0-skew-ps = <0>; /* -420ps */
56+ txd1-skew-ps = <0>; /* -420ps */
57+ txd2-skew-ps = <0>; /* -420ps */
58+ txd3-skew-ps = <0>; /* -420ps */
59+ rxd0-skew-ps = <420>; /* 0ps */
60+ rxd1-skew-ps = <420>; /* 0ps */
61+ rxd2-skew-ps = <420>; /* 0ps */
62+ rxd3-skew-ps = <420>; /* 0ps */
63+ txen-skew-ps = <0>; /* -420ps */
64+ txc-skew-ps = <1860>; /* 960ps */
65+ rxdv-skew-ps = <420>; /* 0ps */
66+ rxc-skew-ps = <1680>; /* 780ps */
67+ reg = <3>;
68+ };
69+ };
70+};
71+
72+&gpio0 {
73+ status = "okay";
74+};
75+
76+&gpio1 {
77+ status = "okay";
78+};
79+
80+&gpio2 {
81+ status = "okay";
82+};
83+
84+&i2c1 {
85+ status = "okay";
86+ isl12022: isl12022@6f {
87+ status = "okay";
88+ compatible = "isil,isl12022";
89+ reg = <0x6f>;
90+ };
91+};
92+
93+/* Following mappings are taken from arria10 socdk dts */
94+&mmc {
95+ status = "okay";
96+ cap-sd-highspeed;
97+ broken-cd;
98+ bus-width = <4>;
99+};
100+
101+&osc1 {
102+ clock-frequency = <33330000>;
103+};
104+
105+&uart1 {
106+ status = "okay";
107+};
108+
109+&usb0 {
110+ status = "okay";
111+ dr_mode = "host";
112+};
arch/arm/boot/dts/spear1310.dtsi+0−6
@@ -82,8 +82,6 @@ · 81 unmodified lines
8282 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
8383 reg-names = "dbi", "config";
8484 interrupts = <0 68 0x4>;
85− interrupt-map-mask = <0 0 0 0>;
86− interrupt-map = <0x0 0 &gic 0 68 0x4>;
8785 num-lanes = <1>;
8886 phys = <&miphy0 1>;
8987 phy-names = "pcie-phy";
@@ -101,8 +99,6 @@ · 11 unmodified lines
10199 reg = <0xb1800000 0x4000>, <0x90000000 0x20000>;
102100 reg-names = "dbi", "config";
103101 interrupts = <0 69 0x4>;
104− interrupt-map-mask = <0 0 0 0>;
105− interrupt-map = <0x0 0 &gic 0 69 0x4>;
106102 num-lanes = <1>;
107103 phys = <&miphy1 1>;
108104 phy-names = "pcie-phy";
@@ -120,8 +116,6 @@ · 11 unmodified lines
120116 reg = <0xb4000000 0x4000>, <0xc0000000 0x20000>;
121117 reg-names = "dbi", "config";
122118 interrupts = <0 70 0x4>;
123− interrupt-map-mask = <0 0 0 0>;
124− interrupt-map = <0x0 0 &gic 0 70 0x4>;
125119 num-lanes = <1>;
126120 phys = <&miphy2 1>;
127121 phy-names = "pcie-phy";
arch/arm/boot/dts/spear1340.dtsi+0−2
@@ -47,8 +47,6 @@ · 46 unmodified lines
4747 reg = <0xb1000000 0x4000>, <0x80000000 0x20000>;
4848 reg-names = "dbi", "config";
4949 interrupts = <0 68 0x4>;
50− interrupt-map-mask = <0 0 0 0>;
51− interrupt-map = <0x0 0 &gic 0 68 0x4>;
5250 num-lanes = <1>;
5351 phys = <&miphy0 1>;
5452 phy-names = "pcie-phy";
arch/arm/boot/dts/ste-ab8500.dtsi+4−9
@@ -129,11 +129,6 @@ · 128 unmodified lines
129129 io-channel-names = "aux1", "aux2";
130130 };
131131
132− ab8500_battery: ab8500_battery {
133− stericsson,battery-type = "LIPO";
134− thermistor-on-batctrl;
135− };
136−
137132 ab8500_fg {
138133 compatible = "stericsson,ab8500-fg";
139134 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
@@ -146,7 +141,7 @@ · 6 unmodified lines
146141 "LOW_BAT_F",
147142 "CC_INT_CALIB",
148143 "CCEOC";
149− battery = <&ab8500_battery>;
144+ monitored-battery = <&battery>;
150145 io-channels = <&gpadc 0x08>;
151146 io-channel-names = "main_bat_v";
152147 };
@@ -163,7 +158,7 @@ · 10 unmodified lines
163158 "BTEMP_HIGH",
164159 "BTEMP_LOW_MEDIUM",
165160 "BTEMP_MEDIUM_HIGH";
166− battery = <&ab8500_battery>;
161+ monitored-battery = <&battery>;
167162 io-channels = <&gpadc 0x02>,
168163 <&gpadc 0x01>;
169164 io-channel-names = "btemp_ball",
@@ -200,7 +195,7 @@ · 30 unmodified lines
200195 "VBUS_OVV",
201196 "CH_WD_EXP",
202197 "VBUS_CH_DROP_END";
203− battery = <&ab8500_battery>;
198+ monitored-battery = <&battery>;
204199 vddadc-supply = <&ab8500_ldo_tvout_reg>;
205200 io-channels = <&gpadc 0x03>,
206201 <&gpadc 0x0a>,
@@ -214,7 +209,7 @@ · 7 unmodified lines
214209
215210 ab8500_chargalg {
216211 compatible = "stericsson,ab8500-chargalg";
217− battery = <&ab8500_battery>;
212+ monitored-battery = <&battery>;
218213 };
219214
220215 ab8500_usb: ab8500_usb {
arch/arm/boot/dts/ste-ab8505.dtsi+4−9
@@ -92,11 +92,6 @@ · 91 unmodified lines
9292 };
9393 };
9494
95− ab8500_battery: ab8500_battery {
96− stericsson,battery-type = "LIPO";
97− thermistor-on-batctrl;
98− };
99−
10095 ab8500_fg {
10196 status = "disabled";
10297 compatible = "stericsson,ab8500-fg";
@@ -110,7 +105,7 @@ · 7 unmodified lines
110105 "LOW_BAT_F",
111106 "CC_INT_CALIB",
112107 "CCEOC";
113− battery = <&ab8500_battery>;
108+ monitored-battery = <&battery>;
114109 io-channels = <&gpadc 0x08>;
115110 io-channel-names = "main_bat_v";
116111 };
@@ -128,7 +123,7 @@ · 11 unmodified lines
128123 "BTEMP_HIGH",
129124 "BTEMP_LOW_MEDIUM",
130125 "BTEMP_MEDIUM_HIGH";
131− battery = <&ab8500_battery>;
126+ monitored-battery = <&battery>;
132127 io-channels = <&gpadc 0x02>,
133128 <&gpadc 0x01>;
134129 io-channel-names = "btemp_ball",
@@ -166,7 +161,7 @@ · 31 unmodified lines
166161 "VBUS_OVV",
167162 "CH_WD_EXP",
168163 "VBUS_CH_DROP_END";
169− battery = <&ab8500_battery>;
164+ monitored-battery = <&battery>;
170165 vddadc-supply = <&ab8500_ldo_adc_reg>;
171166 io-channels = <&gpadc 0x09>,
172167 <&gpadc 0x0b>;
@@ -177,7 +172,7 @@ · 4 unmodified lines
177172 ab8500_chargalg {
178173 status = "disabled";
179174 compatible = "stericsson,ab8500-chargalg";
180− battery = <&ab8500_battery>;
175+ monitored-battery = <&battery>;
181176 };
182177
183178 ab8500_usb: ab8500_usb {
arch/arm/boot/dts/ste-href.dtsi+6−0
@@ -13,6 +13,12 @@ · 12 unmodified lines
1313 reg = <0x00000000 0x20000000>;
1414 };
1515
16+ battery: battery {
17+ compatible = "simple-battery";
18+ battery-type = "lithium-ion-polymer";
19+ thermistor-on-batctrl;
20+ };
21+
1622 soc {
1723 uart@80120000 {
1824 pinctrl-names = "default", "sleep";
arch/arm/boot/dts/ste-snowball.dts+6−0
@@ -17,6 +17,12 @@ · 16 unmodified lines
1717 reg = <0x00000000 0x20000000>;
1818 };
1919
20+ battery: battery {
21+ compatible = "simple-battery";
22+ battery-type = "lithium-ion-polymer";
23+ thermistor-on-batctrl;
24+ };
25+
2026 en_3v3_reg: en_3v3 {
2127 compatible = "regulator-fixed";
2228 regulator-name = "en-3v3-fixed-supply";
arch/arm/boot/dts/ste-ux500-samsung-codina.dts+4−0
@@ -43,6 +43,10 @@ · 42 unmodified lines
4343 stdout-path = &serial2;
4444 };
4545
46+ battery: battery {
47+ compatible = "samsung,eb425161lu";
48+ };
49+
4650 /* TI TXS0206 level translator for 2.9 V */
4751 sd_level_translator: regulator-gpio {
4852 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-gavini.dts+4−0
@@ -20,6 +20,10 @@ · 19 unmodified lines
2020 stdout-path = &serial2;
2121 };
2222
23+ battery: battery {
24+ compatible = "samsung,eb585157lu";
25+ };
26+
2327 /* TI TXS0206 level translator for 2.9 V */
2428 sd_level_translator: regulator-gpio {
2529 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-golden.dts+4−0
@@ -25,6 +25,10 @@ · 24 unmodified lines
2525 stdout-path = &serial2;
2626 };
2727
28+ battery: battery {
29+ compatible = "samsung,eb-l1m7flu";
30+ };
31+
2832 i2c-gpio-0 {
2933 compatible = "i2c-gpio";
3034 sda-gpios = <&gpio2 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
arch/arm/boot/dts/ste-ux500-samsung-janice.dts+7−0
@@ -20,6 +20,10 @@ · 19 unmodified lines
2020 stdout-path = &serial2;
2121 };
2222
23+ battery: battery {
24+ compatible = "samsung,eb535151vu";
25+ };
26+
2327 /* External LDO for eMMC LDO VMEM_3V3 controlled by GPIO6 */
2428 ldo_3v3_reg: regulator-gpio-ldo-3v3 {
2529 compatible = "regulator-fixed";
@@ -266,6 +270,9 @@ · 240 unmodified lines
266270 pinctrl-names = "default";
267271 pinctrl-0 = <&panel_default_mode>;
268272 spi-3wire;
273+ /* TYPE 3: inverse clock polarity and phase */
274+ spi-cpha;
275+ spi-cpol;
269276
270277 port {
271278 panel_in: endpoint {
arch/arm/boot/dts/ste-ux500-samsung-kyle.dts+4−0
@@ -24,6 +24,10 @@ · 23 unmodified lines
2424 stdout-path = &serial2;
2525 };
2626
27+ battery: battery {
28+ compatible = "samsung,eb425161la";
29+ };
30+
2731 /* TI TXS0206 level translator for 2.9 V */
2832 sd_level_translator: regulator-gpio {
2933 compatible = "regulator-fixed";
arch/arm/boot/dts/ste-ux500-samsung-skomer.dts+18−20
@@ -20,6 +20,10 @@ · 19 unmodified lines
2020 stdout-path = &serial2;
2121 };
2222
23+ battery: battery {
24+ compatible = "samsung,eb485159lu";
25+ };
26+
2327 /* TI TXS0206 level translator for 2.9 V */
2428 sd_level_translator: regulator-gpio {
2529 compatible = "regulator-fixed";
@@ -222,7 +226,9 @@ · 196 unmodified lines
222226 };
223227 };
224228
225− // eMMC
229+ /*
230+ * eMMC seems to be mostly Samsung KLM4G1YE4C "4YMD1R"
231+ */
226232 mmc@80005000 {
227233 arm,primecell-periphid = <0x10480180>;
228234 max-frequency = <100000000>;
@@ -232,6 +238,8 @@ · 3 unmodified lines
232238 mmc-ddr-1_8v;
233239 no-sdio;
234240 no-sd;
241+ /* From datasheet page 26 figure 9: 300 ms set-up time for 4GB */
242+ post-power-on-delay-ms = <300>;
235243 vmmc-supply = <&ldo_3v3_reg>;
236244 pinctrl-names = "default", "sleep";
237245 pinctrl-0 = <&mc2_a_1_default>;
@@ -292,10 +300,10 @@ · 54 unmodified lines
292300 };
293301
294302 ab8500_ldo_aux2 {
295− /* Supplies the Cypress TMA140 touchscreen only with 3.3V */
303+ /* Supplies the Cypress TMA140 touchscreen only with 3.0V */
296304 regulator-name = "AUX2";
297− regulator-min-microvolt = <3300000>;
298− regulator-max-microvolt = <3300000>;
305+ regulator-min-microvolt = <3000000>;
306+ regulator-max-microvolt = <3000000>;
299307 };
300308
301309 ab8500_ldo_aux3 {
@@ -314,9 +322,9 @@ · 12 unmodified lines
314322
315323 ab8500_ldo_aux5 {
316324 regulator-name = "AUX5";
325+ /* Intended for 1V8 for touchscreen but actually left unused */
317326 regulator-min-microvolt = <1050000>;
318327 regulator-max-microvolt = <2790000>;
319− regulator-always-on;
320328 };
321329
322330 ab8500_ldo_aux6 {
@@ -444,31 +452,21 @@ · 121 unmodified lines
444452 };
445453
446454 &pinctrl {
447− /*
448− * This extends the MC0 default config to include DAT32DIR
449− * which is used by this machine. If we don't do this the
450− * SD card does not work.
451− */
452455 sdi0 {
453456 mc0_a_1_default {
454− default_mux {
455− function = "mc0";
456− /* This machine uses the DAT31 pin */
457− groups = "mc0_a_1", "mc0dat31dir_a_1";
458− };
459− default_cfg5 {
460− pins = "GPIO21_AB3"; /* DAT31DIR */
461− ste,config = <&out_hi>;
457+ default_cfg1 {
458+ /* GPIO18, 19 & 20 unused so pull down */
459+ ste,config = <&gpio_in_pd>;
462460 };
463461 };
464462 };
465463
466− /* The unused FBCLK needs to be pulled down on this machine */
464+ /* This is a reset line for the eMMC */
467465 sdi2 {
468466 mc2_a_1_default {
469467 default_cfg2 {
470468 pins = "GPIO130_C8"; /* FBCLK */
471− ste,config = <&in_pd>;
469+ ste,config = <&gpio_in_pd>;
472470 };
473471 };
474472 };
arch/arm/boot/dts/stm32mp13-pinctrl.dtsi+64−0
@@ -0,0 +1,64 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com>
5+ */
6+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
7+
8+&pinctrl {
9+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
10+ pins1 {
11+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
12+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
13+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
14+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
15+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
16+ slew-rate = <1>;
17+ drive-push-pull;
18+ bias-disable;
19+ };
20+ pins2 {
21+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
22+ slew-rate = <2>;
23+ drive-push-pull;
24+ bias-disable;
25+ };
26+ };
27+
28+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
29+ pins1 {
30+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
31+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
32+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
33+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
34+ slew-rate = <1>;
35+ drive-push-pull;
36+ bias-disable;
37+ };
38+ pins2 {
39+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
40+ slew-rate = <2>;
41+ drive-push-pull;
42+ bias-disable;
43+ };
44+ pins3 {
45+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
46+ slew-rate = <1>;
47+ drive-open-drain;
48+ bias-disable;
49+ };
50+ };
51+
52+ uart4_pins_a: uart4-0 {
53+ pins1 {
54+ pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */
55+ bias-disable;
56+ drive-push-pull;
57+ slew-rate = <0>;
58+ };
59+ pins2 {
60+ pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */
61+ bias-disable;
62+ };
63+ };
64+};
arch/arm/boot/dts/stm32mp131.dtsi+283−0
@@ -0,0 +1,283 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+#include <dt-bindings/interrupt-controller/arm-gic.h>
7+
8+/ {
9+ #address-cells = <1>;
10+ #size-cells = <1>;
11+
12+ cpus {
13+ #address-cells = <1>;
14+ #size-cells = <0>;
15+
16+ cpu0: cpu@0 {
17+ compatible = "arm,cortex-a7";
18+ device_type = "cpu";
19+ reg = <0>;
20+ };
21+ };
22+
23+ arm-pmu {
24+ compatible = "arm,cortex-a7-pmu";
25+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
26+ interrupt-affinity = <&cpu0>;
27+ interrupt-parent = <&intc>;
28+ };
29+
30+ clocks {
31+ clk_axi: clk-axi {
32+ #clock-cells = <0>;
33+ compatible = "fixed-clock";
34+ clock-frequency = <266500000>;
35+ };
36+
37+ clk_hse: clk-hse {
38+ #clock-cells = <0>;
39+ compatible = "fixed-clock";
40+ clock-frequency = <24000000>;
41+ };
42+
43+ clk_hsi: clk-hsi {
44+ #clock-cells = <0>;
45+ compatible = "fixed-clock";
46+ clock-frequency = <64000000>;
47+ };
48+
49+ clk_lsi: clk-lsi {
50+ #clock-cells = <0>;
51+ compatible = "fixed-clock";
52+ clock-frequency = <32000>;
53+ };
54+
55+ clk_pclk3: clk-pclk3 {
56+ #clock-cells = <0>;
57+ compatible = "fixed-clock";
58+ clock-frequency = <104438965>;
59+ };
60+
61+ clk_pclk4: clk-pclk4 {
62+ #clock-cells = <0>;
63+ compatible = "fixed-clock";
64+ clock-frequency = <133250000>;
65+ };
66+
67+ clk_pll4_p: clk-pll4_p {
68+ #clock-cells = <0>;
69+ compatible = "fixed-clock";
70+ clock-frequency = <50000000>;
71+ };
72+
73+ clk_pll4_r: clk-pll4_r {
74+ #clock-cells = <0>;
75+ compatible = "fixed-clock";
76+ clock-frequency = <99000000>;
77+ };
78+ };
79+
80+ intc: interrupt-controller@a0021000 {
81+ compatible = "arm,cortex-a7-gic";
82+ #interrupt-cells = <3>;
83+ interrupt-controller;
84+ reg = <0xa0021000 0x1000>,
85+ <0xa0022000 0x2000>;
86+ };
87+
88+ psci {
89+ compatible = "arm,psci-1.0";
90+ method = "smc";
91+ };
92+
93+ timer {
94+ compatible = "arm,armv7-timer";
95+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
96+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
97+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
98+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
99+ interrupt-parent = <&intc>;
100+ always-on;
101+ };
102+
103+ soc {
104+ compatible = "simple-bus";
105+ #address-cells = <1>;
106+ #size-cells = <1>;
107+ interrupt-parent = <&intc>;
108+ ranges;
109+
110+ uart4: serial@40010000 {
111+ compatible = "st,stm32h7-uart";
112+ reg = <0x40010000 0x400>;
113+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
114+ clocks = <&clk_hsi>;
115+ status = "disabled";
116+ };
117+
118+ syscfg: syscon@50020000 {
119+ compatible = "st,stm32mp157-syscfg", "syscon";
120+ reg = <0x50020000 0x400>;
121+ clocks = <&clk_pclk3>;
122+ };
123+
124+ sdmmc1: mmc@58005000 {
125+ compatible = "arm,pl18x", "arm,primecell";
126+ arm,primecell-periphid = <0x00253180>;
127+ reg = <0x58005000 0x1000>, <0x58006000 0x1000>;
128+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
129+ interrupt-names = "cmd_irq";
130+ clocks = <&clk_pll4_p>;
131+ clock-names = "apb_pclk";
132+ cap-sd-highspeed;
133+ cap-mmc-highspeed;
134+ max-frequency = <120000000>;
135+ status = "disabled";
136+ };
137+
138+ iwdg2: watchdog@5a002000 {
139+ compatible = "st,stm32mp1-iwdg";
140+ reg = <0x5a002000 0x400>;
141+ clocks = <&clk_pclk4>, <&clk_lsi>;
142+ clock-names = "pclk", "lsi";
143+ status = "disabled";
144+ };
145+
146+ bsec: efuse@5c005000 {
147+ compatible = "st,stm32mp15-bsec";
148+ reg = <0x5c005000 0x400>;
149+ #address-cells = <1>;
150+ #size-cells = <1>;
151+
152+ part_number_otp: part_number_otp@4 {
153+ reg = <0x4 0x2>;
154+ };
155+ ts_cal1: calib@5c {
156+ reg = <0x5c 0x2>;
157+ };
158+ ts_cal2: calib@5e {
159+ reg = <0x5e 0x2>;
160+ };
161+ };
162+
163+ /*
164+ * Break node order to solve dependency probe issue between
165+ * pinctrl and exti.
166+ */
167+ pinctrl: pin-controller@50002000 {
168+ #address-cells = <1>;
169+ #size-cells = <1>;
170+ compatible = "st,stm32mp135-pinctrl";
171+ ranges = <0 0x50002000 0x8400>;
172+ pins-are-numbered;
173+
174+ gpioa: gpio@50002000 {
175+ gpio-controller;
176+ #gpio-cells = <2>;
177+ interrupt-controller;
178+ #interrupt-cells = <2>;
179+ reg = <0x0 0x400>;
180+ clocks = <&clk_pclk4>;
181+ st,bank-name = "GPIOA";
182+ ngpios = <16>;
183+ gpio-ranges = <&pinctrl 0 0 16>;
184+ };
185+
186+ gpiob: gpio@50003000 {
187+ gpio-controller;
188+ #gpio-cells = <2>;
189+ interrupt-controller;
190+ #interrupt-cells = <2>;
191+ reg = <0x1000 0x400>;
192+ clocks = <&clk_pclk4>;
193+ st,bank-name = "GPIOB";
194+ ngpios = <16>;
195+ gpio-ranges = <&pinctrl 0 16 16>;
196+ };
197+
198+ gpioc: gpio@50004000 {
199+ gpio-controller;
200+ #gpio-cells = <2>;
201+ interrupt-controller;
202+ #interrupt-cells = <2>;
203+ reg = <0x2000 0x400>;
204+ clocks = <&clk_pclk4>;
205+ st,bank-name = "GPIOC";
206+ ngpios = <16>;
207+ gpio-ranges = <&pinctrl 0 32 16>;
208+ };
209+
210+ gpiod: gpio@50005000 {
211+ gpio-controller;
212+ #gpio-cells = <2>;
213+ interrupt-controller;
214+ #interrupt-cells = <2>;
215+ reg = <0x3000 0x400>;
216+ clocks = <&clk_pclk4>;
217+ st,bank-name = "GPIOD";
218+ ngpios = <16>;
219+ gpio-ranges = <&pinctrl 0 48 16>;
220+ };
221+
222+ gpioe: gpio@50006000 {
223+ gpio-controller;
224+ #gpio-cells = <2>;
225+ interrupt-controller;
226+ #interrupt-cells = <2>;
227+ reg = <0x4000 0x400>;
228+ clocks = <&clk_pclk4>;
229+ st,bank-name = "GPIOE";
230+ ngpios = <16>;
231+ gpio-ranges = <&pinctrl 0 64 16>;
232+ };
233+
234+ gpiof: gpio@50007000 {
235+ gpio-controller;
236+ #gpio-cells = <2>;
237+ interrupt-controller;
238+ #interrupt-cells = <2>;
239+ reg = <0x5000 0x400>;
240+ clocks = <&clk_pclk4>;
241+ st,bank-name = "GPIOF";
242+ ngpios = <16>;
243+ gpio-ranges = <&pinctrl 0 80 16>;
244+ };
245+
246+ gpiog: gpio@50008000 {
247+ gpio-controller;
248+ #gpio-cells = <2>;
249+ interrupt-controller;
250+ #interrupt-cells = <2>;
251+ reg = <0x6000 0x400>;
252+ clocks = <&clk_pclk4>;
253+ st,bank-name = "GPIOG";
254+ ngpios = <16>;
255+ gpio-ranges = <&pinctrl 0 96 16>;
256+ };
257+
258+ gpioh: gpio@50009000 {
259+ gpio-controller;
260+ #gpio-cells = <2>;
261+ interrupt-controller;
262+ #interrupt-cells = <2>;
263+ reg = <0x7000 0x400>;
264+ clocks = <&clk_pclk4>;
265+ st,bank-name = "GPIOH";
266+ ngpios = <15>;
267+ gpio-ranges = <&pinctrl 0 112 15>;
268+ };
269+
270+ gpioi: gpio@5000a000 {
271+ gpio-controller;
272+ #gpio-cells = <2>;
273+ interrupt-controller;
274+ #interrupt-cells = <2>;
275+ reg = <0x8000 0x400>;
276+ clocks = <&clk_pclk4>;
277+ st,bank-name = "GPIOI";
278+ ngpios = <8>;
279+ gpio-ranges = <&pinctrl 0 128 8>;
280+ };
281+ };
282+ };
283+};
arch/arm/boot/dts/stm32mp133.dtsi+37−0
@@ -0,0 +1,37 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+
7+#include "stm32mp131.dtsi"
8+
9+/ {
10+ soc {
11+ m_can1: can@4400e000 {
12+ compatible = "bosch,m_can";
13+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
14+ reg-names = "m_can", "message_ram";
15+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
16+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
17+ interrupt-names = "int0", "int1";
18+ clocks = <&clk_hse>, <&clk_pll4_r>;
19+ clock-names = "hclk", "cclk";
20+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
21+ status = "disabled";
22+ };
23+
24+ m_can2: can@4400f000 {
25+ compatible = "bosch,m_can";
26+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
27+ reg-names = "m_can", "message_ram";
28+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
29+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
30+ interrupt-names = "int0", "int1";
31+ clocks = <&clk_hse>, <&clk_pll4_r>;
32+ clock-names = "hclk", "cclk";
33+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
34+ status = "disabled";
35+ };
36+ };
37+};
arch/arm/boot/dts/stm32mp135.dtsi+12−0
@@ -0,0 +1,12 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+
7+#include "stm32mp133.dtsi"
8+
9+/ {
10+ soc {
11+ };
12+};
arch/arm/boot/dts/stm32mp135f-dk.dts+56−0
@@ -0,0 +1,56 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+
7+/dts-v1/;
8+
9+#include "stm32mp135.dtsi"
10+#include "stm32mp13xf.dtsi"
11+#include "stm32mp13-pinctrl.dtsi"
12+
13+/ {
14+ model = "STMicroelectronics STM32MP135F-DK Discovery Board";
15+ compatible = "st,stm32mp135f-dk", "st,stm32mp135";
16+
17+ aliases {
18+ serial0 = &uart4;
19+ };
20+
21+ memory@c0000000 {
22+ device_type = "memory";
23+ reg = <0xc0000000 0x20000000>;
24+ };
25+
26+ vdd_sd: vdd-sd {
27+ compatible = "regulator-fixed";
28+ regulator-name = "vdd_sd";
29+ regulator-min-microvolt = <2900000>;
30+ regulator-max-microvolt = <2900000>;
31+ regulator-always-on;
32+ };
33+};
34+
35+&iwdg2 {
36+ timeout-sec = <32>;
37+ status = "okay";
38+};
39+
40+&sdmmc1 {
41+ pinctrl-names = "default", "opendrain";
42+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
43+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
44+ broken-cd;
45+ disable-wp;
46+ st,neg-edge;
47+ bus-width = <4>;
48+ vmmc-supply = <&vdd_sd>;
49+ status = "okay";
50+};
51+
52+&uart4 {
53+ pinctrl-names = "default";
54+ pinctrl-0 = <&uart4_pins_a>;
55+ status = "okay";
56+};
arch/arm/boot/dts/stm32mp13xc.dtsi+17−0
@@ -0,0 +1,17 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+
7+/ {
8+ soc {
9+ cryp: crypto@54002000 {
10+ compatible = "st,stm32mp1-cryp";
11+ reg = <0x54002000 0x400>;
12+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
13+ clocks = <&clk_axi>;
14+ status = "disabled";
15+ };
16+ };
17+};
arch/arm/boot/dts/stm32mp13xf.dtsi+17−0
@@ -0,0 +1,17 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
2+/*
3+ * Copyright (C) STMicroelectronics 2021 - All Rights Reserved
4+ * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
5+ */
6+
7+/ {
8+ soc {
9+ cryp: crypto@54002000 {
10+ compatible = "st,stm32mp1-cryp";
11+ reg = <0x54002000 0x400>;
12+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
13+ clocks = <&clk_axi>;
14+ status = "disabled";
15+ };
16+ };
17+};
arch/arm/boot/dts/stm32mp15-pinctrl.dtsi+4−4
@@ -1179,7 +1179,7 @@ · 1178 unmodified lines
11791179 };
11801180 };
11811181
1182− sai2a_pins_c: sai2a-4 {
1182+ sai2a_pins_c: sai2a-2 {
11831183 pins {
11841184 pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
11851185 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
@@ -1190,7 +1190,7 @@ · 4 unmodified lines
11901190 };
11911191 };
11921192
1193− sai2a_sleep_pins_c: sai2a-5 {
1193+ sai2a_sleep_pins_c: sai2a-2 {
11941194 pins {
11951195 pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
11961196 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
@@ -1235,14 +1235,14 @@ · 38 unmodified lines
12351235 };
12361236 };
12371237
1238− sai2b_pins_c: sai2a-4 {
1238+ sai2b_pins_c: sai2b-2 {
12391239 pins1 {
12401240 pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
12411241 bias-disable;
12421242 };
12431243 };
12441244
1245− sai2b_sleep_pins_c: sai2a-sleep-5 {
1245+ sai2b_sleep_pins_c: sai2b-sleep-2 {
12461246 pins {
12471247 pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
12481248 };
arch/arm/boot/dts/stm32mp151.dtsi+9−9
@@ -824,7 +824,7 @@ · 823 unmodified lines
824824 #sound-dai-cells = <0>;
825825
826826 compatible = "st,stm32-sai-sub-a";
827− reg = <0x4 0x1c>;
827+ reg = <0x4 0x20>;
828828 clocks = <&rcc SAI1_K>;
829829 clock-names = "sai_ck";
830830 dmas = <&dmamux1 87 0x400 0x01>;
@@ -834,7 +834,7 @@ · 3 unmodified lines
834834 sai1b: audio-controller@4400a024 {
835835 #sound-dai-cells = <0>;
836836 compatible = "st,stm32-sai-sub-b";
837− reg = <0x24 0x1c>;
837+ reg = <0x24 0x20>;
838838 clocks = <&rcc SAI1_K>;
839839 clock-names = "sai_ck";
840840 dmas = <&dmamux1 88 0x400 0x01>;
@@ -855,7 +855,7 @@ · 14 unmodified lines
855855 sai2a: audio-controller@4400b004 {
856856 #sound-dai-cells = <0>;
857857 compatible = "st,stm32-sai-sub-a";
858− reg = <0x4 0x1c>;
858+ reg = <0x4 0x20>;
859859 clocks = <&rcc SAI2_K>;
860860 clock-names = "sai_ck";
861861 dmas = <&dmamux1 89 0x400 0x01>;
@@ -865,7 +865,7 @@ · 3 unmodified lines
865865 sai2b: audio-controller@4400b024 {
866866 #sound-dai-cells = <0>;
867867 compatible = "st,stm32-sai-sub-b";
868− reg = <0x24 0x1c>;
868+ reg = <0x24 0x20>;
869869 clocks = <&rcc SAI2_K>;
870870 clock-names = "sai_ck";
871871 dmas = <&dmamux1 90 0x400 0x01>;
@@ -886,7 +886,7 @@ · 14 unmodified lines
886886 sai3a: audio-controller@4400c004 {
887887 #sound-dai-cells = <0>;
888888 compatible = "st,stm32-sai-sub-a";
889− reg = <0x04 0x1c>;
889+ reg = <0x04 0x20>;
890890 clocks = <&rcc SAI3_K>;
891891 clock-names = "sai_ck";
892892 dmas = <&dmamux1 113 0x400 0x01>;
@@ -896,7 +896,7 @@ · 3 unmodified lines
896896 sai3b: audio-controller@4400c024 {
897897 #sound-dai-cells = <0>;
898898 compatible = "st,stm32-sai-sub-b";
899− reg = <0x24 0x1c>;
899+ reg = <0x24 0x20>;
900900 clocks = <&rcc SAI3_K>;
901901 clock-names = "sai_ck";
902902 dmas = <&dmamux1 114 0x400 0x01>;
@@ -1271,7 +1271,7 @@ · 368 unmodified lines
12711271 sai4a: audio-controller@50027004 {
12721272 #sound-dai-cells = <0>;
12731273 compatible = "st,stm32-sai-sub-a";
1274− reg = <0x04 0x1c>;
1274+ reg = <0x04 0x20>;
12751275 clocks = <&rcc SAI4_K>;
12761276 clock-names = "sai_ck";
12771277 dmas = <&dmamux1 99 0x400 0x01>;
@@ -1281,7 +1281,7 @@ · 3 unmodified lines
12811281 sai4b: audio-controller@50027024 {
12821282 #sound-dai-cells = <0>;
12831283 compatible = "st,stm32-sai-sub-b";
1284− reg = <0x24 0x1c>;
1284+ reg = <0x24 0x20>;
12851285 clocks = <&rcc SAI4_K>;
12861286 clock-names = "sai_ck";
12871287 dmas = <&dmamux1 100 0x400 0x01>;
@@ -1452,7 +1452,7 @@ · 164 unmodified lines
14521452 usbh_ohci: usb@5800c000 {
14531453 compatible = "generic-ohci";
14541454 reg = <0x5800c000 0x1000>;
1455− clocks = <&rcc USBH>;
1455+ clocks = <&rcc USBH>, <&usbphyc>;
14561456 resets = <&rcc USBH_R>;
14571457 interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
14581458 status = "disabled";
arch/arm/boot/dts/stm32mp157c-odyssey.dts+6−0
@@ -22,6 +22,12 @@ · 21 unmodified lines
2222 };
2323 };
2424
25+&dcmi {
26+ pinctrl-names = "default", "sleep";
27+ pinctrl-0 = <&dcmi_pins_b>;
28+ pinctrl-1 = <&dcmi_sleep_pins_b>;
29+};
30+
2531 &ethernet0 {
2632 status = "okay";
2733 pinctrl-0 = <&ethernet0_rgmii_pins_a>;
arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi+1−1
@@ -202,7 +202,7 @@ · 201 unmodified lines
202202 compatible = "jedec,spi-nor";
203203 reg = <0>;
204204 spi-rx-bus-width = <4>;
205− spi-max-frequency = <108000000>;
205+ spi-max-frequency = <50000000>;
206206 #address-cells = <1>;
207207 #size-cells = <1>;
208208 };
arch/arm/boot/dts/stm32mp15xx-dkx.dtsi+1−1
@@ -249,7 +249,7 @@ · 248 unmodified lines
249249 stusb1600@28 {
250250 compatible = "st,stusb1600";
251251 reg = <0x28>;
252− interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
252+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
253253 interrupt-parent = <&gpioi>;
254254 pinctrl-names = "default";
255255 pinctrl-0 = <&stusb1600_pins_a>;
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts+5−6
@@ -91,12 +91,11 @@ · 90 unmodified lines
9191 /*
9292 * The A10-Lime is known to be unstable when running at 1008 MHz
9393 */
94− operating-points = <
95− /* kHz uV */
96− 912000 1350000
97− 864000 1300000
98− 624000 1250000
99− >;
94+ operating-points =
95+ /* kHz uV */
96+ <912000 1350000>,
97+ <864000 1300000>,
98+ <624000 1250000>;
10099 };
101100
102101 &de {
arch/arm/boot/dts/sun4i-a10.dtsi+5−6
@@ -115,13 +115,12 @@ · 114 unmodified lines
115115 reg = <0x0>;
116116 clocks = <&ccu CLK_CPU>;
117117 clock-latency = <244144>; /* 8 32k periods */
118− operating-points = <
118+ operating-points =
119119 /* kHz uV */
120− 1008000 1400000
121− 912000 1350000
122− 864000 1300000
123− 624000 1250000
124− >;
120+ <1008000 1400000>,
121+ <912000 1350000>,
122+ <864000 1300000>,
123+ <624000 1250000>;
125124 #cooling-cells = <2>;
126125 };
127126 };
arch/arm/boot/dts/sun5i-a13.dtsi+7−8
@@ -102,15 +102,14 @@ · 101 unmodified lines
102102
103103 &cpu0 {
104104 clock-latency = <244144>; /* 8 32k periods */
105− operating-points = <
105+ operating-points =
106106 /* kHz uV */
107− 1008000 1400000
108− 912000 1350000
109− 864000 1300000
110− 624000 1200000
111− 576000 1200000
112− 432000 1200000
113− >;
107+ <1008000 1400000>,
108+ <912000 1350000>,
109+ <864000 1300000>,
110+ <624000 1200000>,
111+ <576000 1200000>,
112+ <432000 1200000>;
114113 #cooling-cells = <2>;
115114 };
116115
arch/arm/boot/dts/sun6i-a31.dtsi+20−24
@@ -105,13 +105,12 @@ · 104 unmodified lines
105105 reg = <0>;
106106 clocks = <&ccu CLK_CPU>;
107107 clock-latency = <244144>; /* 8 32k periods */
108− operating-points = <
108+ operating-points =
109109 /* kHz uV */
110− 1008000 1200000
111− 864000 1200000
112− 720000 1100000
113− 480000 1000000
114− >;
110+ <1008000 1200000>,
111+ <864000 1200000>,
112+ <720000 1100000>,
113+ <480000 1000000>;
115114 #cooling-cells = <2>;
116115 };
117116
@@ -121,13 +120,12 @@ · 3 unmodified lines
121120 reg = <1>;
122121 clocks = <&ccu CLK_CPU>;
123122 clock-latency = <244144>; /* 8 32k periods */
124− operating-points = <
123+ operating-points =
125124 /* kHz uV */
126− 1008000 1200000
127− 864000 1200000
128− 720000 1100000
129− 480000 1000000
130− >;
125+ <1008000 1200000>,
126+ <864000 1200000>,
127+ <720000 1100000>,
128+ <480000 1000000>;
131129 #cooling-cells = <2>;
132130 };
133131
@@ -137,13 +135,12 @@ · 3 unmodified lines
137135 reg = <2>;
138136 clocks = <&ccu CLK_CPU>;
139137 clock-latency = <244144>; /* 8 32k periods */
140− operating-points = <
138+ operating-points =
141139 /* kHz uV */
142− 1008000 1200000
143− 864000 1200000
144− 720000 1100000
145− 480000 1000000
146− >;
140+ <1008000 1200000>,
141+ <864000 1200000>,
142+ <720000 1100000>,
143+ <480000 1000000>;
147144 #cooling-cells = <2>;
148145 };
149146
@@ -153,13 +150,12 @@ · 3 unmodified lines
153150 reg = <3>;
154151 clocks = <&ccu CLK_CPU>;
155152 clock-latency = <244144>; /* 8 32k periods */
156− operating-points = <
153+ operating-points =
157154 /* kHz uV */
158− 1008000 1200000
159− 864000 1200000
160− 720000 1100000
161− 480000 1000000
162− >;
155+ <1008000 1200000>,
156+ <864000 1200000>,
157+ <720000 1100000>,
158+ <480000 1000000>;
163159 #cooling-cells = <2>;
164160 };
165161 };
arch/arm/boot/dts/sun7i-a20-bananapi.dts+8−9
@@ -104,16 +104,15 @@ · 103 unmodified lines
104104
105105 &cpu0 {
106106 cpu-supply = <&reg_dcdc2>;
107− operating-points = <
107+ operating-points =
108108 /* kHz uV */
109− 960000 1400000
110− 912000 1400000
111− 864000 1350000
112− 720000 1250000
113− 528000 1150000
114− 312000 1100000
115− 144000 1050000
116− >;
109+ <960000 1400000>,
110+ <912000 1400000>,
111+ <864000 1350000>,
112+ <720000 1250000>,
113+ <528000 1150000>,
114+ <312000 1100000>,
115+ <144000 1050000>;
117116 };
118117
119118 &de {
arch/arm/boot/dts/sun7i-a20.dtsi+16−18
@@ -106,16 +106,15 @@ · 105 unmodified lines
106106 reg = <0>;
107107 clocks = <&ccu CLK_CPU>;
108108 clock-latency = <244144>; /* 8 32k periods */
109− operating-points = <
109+ operating-points =
110110 /* kHz uV */
111− 960000 1400000
112− 912000 1400000
113− 864000 1300000
114− 720000 1200000
115− 528000 1100000
116− 312000 1000000
117− 144000 1000000
118− >;
111+ <960000 1400000>,
112+ <912000 1400000>,
113+ <864000 1300000>,
114+ <720000 1200000>,
115+ <528000 1100000>,
116+ <312000 1000000>,
117+ <144000 1000000>;
119118 #cooling-cells = <2>;
120119 };
121120
@@ -125,16 +124,15 @@ · 3 unmodified lines
125124 reg = <1>;
126125 clocks = <&ccu CLK_CPU>;
127126 clock-latency = <244144>; /* 8 32k periods */
128− operating-points = <
127+ operating-points =
129128 /* kHz uV */
130− 960000 1400000
131− 912000 1400000
132− 864000 1300000
133− 720000 1200000
134− 528000 1100000
135− 312000 1000000
136− 144000 1000000
137− >;
129+ <960000 1400000>,
130+ <912000 1400000>,
131+ <864000 1300000>,
132+ <720000 1200000>,
133+ <528000 1100000>,
134+ <312000 1000000>,
135+ <144000 1000000>;
138136 #cooling-cells = <2>;
139137 };
140138 };
arch/arm/boot/dts/sun8i-a33.dtsi+2−2
@@ -46,7 +46,7 @@ · 45 unmodified lines
4646 #include <dt-bindings/thermal/thermal.h>
4747
4848 / {
49− cpu0_opp_table: opp_table0 {
49+ cpu0_opp_table: opp-table-cpu {
5050 compatible = "operating-points-v2";
5151 opp-shared;
5252
@@ -164,7 +164,7 @@ · 111 unmodified lines
164164 io-channels = <&ths>;
165165 };
166166
167− mali_opp_table: gpu-opp-table {
167+ mali_opp_table: opp-table-gpu {
168168 compatible = "operating-points-v2";
169169
170170 opp-144000000 {
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts+1−1
@@ -169,7 +169,7 @@ · 168 unmodified lines
169169 status = "okay";
170170
171171 touchscreen@38 {
172− compatible = "edt,edt-ft5x06";
172+ compatible = "edt,edt-ft5206";
173173 reg = <0x38>;
174174 interrupt-parent = <&r_pio>;
175175 interrupts = <0 7 IRQ_TYPE_EDGE_FALLING>; /* PL7 */
arch/arm/boot/dts/sun8i-a83t.dtsi+2−2
@@ -200,7 +200,7 @@ · 199 unmodified lines
200200 status = "disabled";
201201 };
202202
203− cpu0_opp_table: opp_table0 {
203+ cpu0_opp_table: opp-table-cluster0 {
204204 compatible = "operating-points-v2";
205205 opp-shared;
206206
@@ -253,7 +253,7 @@ · 46 unmodified lines
253253 };
254254 };
255255
256− cpu1_opp_table: opp_table1 {
256+ cpu1_opp_table: opp-table-cluster1 {
257257 compatible = "operating-points-v2";
258258 opp-shared;
259259
arch/arm/boot/dts/sun8i-h3.dtsi+2−2
@@ -44,7 +44,7 @@ · 43 unmodified lines
4444 #include <dt-bindings/thermal/thermal.h>
4545
4646 / {
47− cpu0_opp_table: opp_table0 {
47+ cpu0_opp_table: opp-table-cpu {
4848 compatible = "operating-points-v2";
4949 opp-shared;
5050
@@ -112,7 +112,7 @@ · 61 unmodified lines
112112 };
113113 };
114114
115− gpu_opp_table: gpu-opp-table {
115+ gpu_opp_table: opp-table-gpu {
116116 compatible = "operating-points-v2";
117117
118118 opp-120000000 {
arch/arm/boot/dts/sun8i-r40.dtsi+39−0
@@ -736,6 +736,45 @@ · 735 unmodified lines
736736 status = "disabled";
737737 };
738738
739+ i2s0: i2s@1c22000 {
740+ #sound-dai-cells = <0>;
741+ compatible = "allwinner,sun8i-r40-i2s",
742+ "allwinner,sun8i-h3-i2s";
743+ reg = <0x01c22000 0x400>;
744+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
745+ clocks = <&ccu CLK_BUS_I2S0>, <&ccu CLK_I2S0>;
746+ clock-names = "apb", "mod";
747+ resets = <&ccu RST_BUS_I2S0>;
748+ dmas = <&dma 3>, <&dma 3>;
749+ dma-names = "rx", "tx";
750+ };
751+
752+ i2s1: i2s@1c22400 {
753+ #sound-dai-cells = <0>;
754+ compatible = "allwinner,sun8i-r40-i2s",
755+ "allwinner,sun8i-h3-i2s";
756+ reg = <0x01c22400 0x400>;
757+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
758+ clocks = <&ccu CLK_BUS_I2S1>, <&ccu CLK_I2S1>;
759+ clock-names = "apb", "mod";
760+ resets = <&ccu RST_BUS_I2S1>;
761+ dmas = <&dma 4>, <&dma 4>;
762+ dma-names = "rx", "tx";
763+ };
764+
765+ i2s2: i2s@1c22800 {
766+ #sound-dai-cells = <0>;
767+ compatible = "allwinner,sun8i-r40-i2s",
768+ "allwinner,sun8i-h3-i2s";
769+ reg = <0x01c22800 0x400>;
770+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
771+ clocks = <&ccu CLK_BUS_I2S2>, <&ccu CLK_I2S2>;
772+ clock-names = "apb", "mod";
773+ resets = <&ccu RST_BUS_I2S2>;
774+ dmas = <&dma 6>, <&dma 6>;
775+ dma-names = "rx", "tx";
776+ };
777+
739778 ths: thermal-sensor@1c24c00 {
740779 compatible = "allwinner,sun8i-r40-ths";
741780 reg = <0x01c24c00 0x100>;
arch/arm/boot/dts/sun8i-v3-sl631.dtsi+1−1
@@ -115,7 +115,7 @@ · 114 unmodified lines
115115 &spi0 {
116116 status = "okay";
117117
118− spi-flash@0 {
118+ flash@0 {
119119 reg = <0>;
120120 compatible = "jedec,spi-nor";
121121 spi-max-frequency = <50000000>;
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts+1−1
@@ -87,7 +87,7 @@ · 86 unmodified lines
8787 };
8888
8989 vga-dac {
90− compatible = "corpro,gm7123", "adi,adv7123", "dumb-vga-dac";
90+ compatible = "corpro,gm7123", "adi,adv7123";
9191 vdd-supply = <&reg_dcdc1>;
9292
9393 ports {
arch/arm/boot/dts/sunxi-libretech-all-h3-it.dtsi+1−1
@@ -156,7 +156,7 @@ · 155 unmodified lines
156156 &spi0 {
157157 status = "okay";
158158
159− spiflash@0 {
159+ flash@0 {
160160 compatible = "jedec,spi-nor";
161161 reg = <0>;
162162 spi-max-frequency = <50000000>;
arch/arm/boot/dts/tegra114.dtsi+6−2
@@ -691,7 +691,7 @@ · 690 unmodified lines
691691 };
692692
693693 usb@7d000000 {
694− compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
694+ compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
695695 reg = <0x7d000000 0x4000>;
696696 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
697697 phy_type = "utmi";
@@ -706,6 +706,7 @@ · 8 unmodified lines
706706 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
707707 reg = <0x7d000000 0x4000>,
708708 <0x7d000000 0x4000>;
709+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
709710 phy_type = "utmi";
710711 clocks = <&tegra_car TEGRA114_CLK_USBD>,
711712 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -725,11 +726,12 @@ · 13 unmodified lines
725726 nvidia,hsdiscon-level = <5>;
726727 nvidia,xcvr-hsslew = <12>;
727728 nvidia,has-utmi-pad-registers;
729+ nvidia,pmc = <&tegra_pmc 0>;
728730 status = "disabled";
729731 };
730732
731733 usb@7d008000 {
732− compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci", "usb-ehci";
734+ compatible = "nvidia,tegra114-ehci", "nvidia,tegra30-ehci";
733735 reg = <0x7d008000 0x4000>;
734736 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
735737 phy_type = "utmi";
@@ -744,6 +746,7 @@ · 8 unmodified lines
744746 compatible = "nvidia,tegra114-usb-phy", "nvidia,tegra30-usb-phy";
745747 reg = <0x7d008000 0x4000>,
746748 <0x7d000000 0x4000>;
749+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
747750 phy_type = "utmi";
748751 clocks = <&tegra_car TEGRA114_CLK_USB3>,
749752 <&tegra_car TEGRA114_CLK_PLL_U>,
@@ -762,6 +765,7 @@ · 12 unmodified lines
762765 nvidia,hssquelch-level = <2>;
763766 nvidia,hsdiscon-level = <5>;
764767 nvidia,xcvr-hsslew = <12>;
768+ nvidia,pmc = <&tegra_pmc 2>;
765769 status = "disabled";
766770 };
767771
arch/arm/boot/dts/tegra124.dtsi+9−3
@@ -1079,7 +1079,7 @@ · 1078 unmodified lines
10791079 };
10801080
10811081 usb@7d000000 {
1082− compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
1082+ compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
10831083 reg = <0x0 0x7d000000 0x0 0x4000>;
10841084 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
10851085 phy_type = "utmi";
@@ -1094,6 +1094,7 @@ · 8 unmodified lines
10941094 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
10951095 reg = <0x0 0x7d000000 0x0 0x4000>,
10961096 <0x0 0x7d000000 0x0 0x4000>;
1097+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
10971098 phy_type = "utmi";
10981099 clocks = <&tegra_car TEGRA124_CLK_USBD>,
10991100 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1113,11 +1114,12 @@ · 13 unmodified lines
11131114 nvidia,hsdiscon-level = <5>;
11141115 nvidia,xcvr-hsslew = <12>;
11151116 nvidia,has-utmi-pad-registers;
1117+ nvidia,pmc = <&tegra_pmc 0>;
11161118 status = "disabled";
11171119 };
11181120
11191121 usb@7d004000 {
1120− compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
1122+ compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
11211123 reg = <0x0 0x7d004000 0x0 0x4000>;
11221124 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
11231125 phy_type = "utmi";
@@ -1132,6 +1134,7 @@ · 8 unmodified lines
11321134 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
11331135 reg = <0x0 0x7d004000 0x0 0x4000>,
11341136 <0x0 0x7d000000 0x0 0x4000>;
1137+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
11351138 phy_type = "utmi";
11361139 clocks = <&tegra_car TEGRA124_CLK_USB2>,
11371140 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1150,11 +1153,12 @@ · 12 unmodified lines
11501153 nvidia,hssquelch-level = <2>;
11511154 nvidia,hsdiscon-level = <5>;
11521155 nvidia,xcvr-hsslew = <12>;
1156+ nvidia,pmc = <&tegra_pmc 1>;
11531157 status = "disabled";
11541158 };
11551159
11561160 usb@7d008000 {
1157− compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci", "usb-ehci";
1161+ compatible = "nvidia,tegra124-ehci", "nvidia,tegra30-ehci";
11581162 reg = <0x0 0x7d008000 0x0 0x4000>;
11591163 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
11601164 phy_type = "utmi";
@@ -1169,6 +1173,7 @@ · 8 unmodified lines
11691173 compatible = "nvidia,tegra124-usb-phy", "nvidia,tegra30-usb-phy";
11701174 reg = <0x0 0x7d008000 0x0 0x4000>,
11711175 <0x0 0x7d000000 0x0 0x4000>;
1176+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
11721177 phy_type = "utmi";
11731178 clocks = <&tegra_car TEGRA124_CLK_USB3>,
11741179 <&tegra_car TEGRA124_CLK_PLL_U>,
@@ -1187,6 +1192,7 @@ · 12 unmodified lines
11871192 nvidia,hssquelch-level = <2>;
11881193 nvidia,hsdiscon-level = <5>;
11891194 nvidia,xcvr-hsslew = <12>;
1195+ nvidia,pmc = <&tegra_pmc 2>;
11901196 status = "disabled";
11911197 };
11921198
arch/arm/boot/dts/tegra20-acer-a500-picasso.dts+5−2
@@ -393,6 +393,10 @@ · 392 unmodified lines
393393 bluetooth {
394394 compatible = "brcm,bcm4329-bt";
395395
396+ interrupt-parent = <&gpio>;
397+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
398+ interrupt-names = "host-wakeup";
399+
396400 /* PLLP 216MHz / 16 / 4 */
397401 max-speed = <3375000>;
398402
@@ -403,7 +407,6 @@ · 4 unmodified lines
403407 vddio-supply = <&vdd_1v8_sys>;
404408
405409 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
406− host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
407410 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
408411 };
409412 };
@@ -543,7 +546,7 @@ · 133 unmodified lines
543546 status = "okay";
544547
545548 magnetometer@c {
546− compatible = "ak,ak8975";
549+ compatible = "asahi-kasei,ak8975";
547550 reg = <0x0c>;
548551
549552 interrupt-parent = <&gpio>;
arch/arm/boot/dts/tegra20-paz00.dts+0−2
@@ -573,8 +573,6 @@ · 572 unmodified lines
573573
574574 brightness-levels = <0 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 255>;
575575 default-brightness-level = <10>;
576−
577− backlight-boot-off;
578576 };
579577
580578 clk32k_in: clock@0 {
arch/arm/boot/dts/tegra20.dtsi+9−4
@@ -744,11 +744,10 @@ · 743 unmodified lines
744744 };
745745
746746 usb@c5000000 {
747− compatible = "nvidia,tegra20-ehci", "usb-ehci";
747+ compatible = "nvidia,tegra20-ehci";
748748 reg = <0xc5000000 0x4000>;
749749 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
750750 phy_type = "utmi";
751− nvidia,has-legacy-mode;
752751 clocks = <&tegra_car TEGRA20_CLK_USBD>;
753752 resets = <&tegra_car 22>;
754753 reset-names = "usb";
@@ -761,6 +760,7 @@ · 6 unmodified lines
761760 compatible = "nvidia,tegra20-usb-phy";
762761 reg = <0xc5000000 0x4000>,
763762 <0xc5000000 0x4000>;
763+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
764764 phy_type = "utmi";
765765 clocks = <&tegra_car TEGRA20_CLK_USBD>,
766766 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -779,11 +779,12 @@ · 12 unmodified lines
779779 nvidia,xcvr-lsfslew = <1>;
780780 nvidia,xcvr-lsrslew = <1>;
781781 nvidia,has-utmi-pad-registers;
782+ nvidia,pmc = <&tegra_pmc 0>;
782783 status = "disabled";
783784 };
784785
785786 usb@c5004000 {
786− compatible = "nvidia,tegra20-ehci", "usb-ehci";
787+ compatible = "nvidia,tegra20-ehci";
787788 reg = <0xc5004000 0x4000>;
788789 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
789790 phy_type = "ulpi";
@@ -797,6 +798,7 @@ · 7 unmodified lines
797798 phy2: usb-phy@c5004000 {
798799 compatible = "nvidia,tegra20-usb-phy";
799800 reg = <0xc5004000 0x4000>;
801+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
800802 phy_type = "ulpi";
801803 clocks = <&tegra_car TEGRA20_CLK_USB2>,
802804 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -805,11 +807,12 @@ · 2 unmodified lines
805807 resets = <&tegra_car 58>, <&tegra_car 22>;
806808 reset-names = "usb", "utmi-pads";
807809 #phy-cells = <0>;
810+ nvidia,pmc = <&tegra_pmc 1>;
808811 status = "disabled";
809812 };
810813
811814 usb@c5008000 {
812− compatible = "nvidia,tegra20-ehci", "usb-ehci";
815+ compatible = "nvidia,tegra20-ehci";
813816 reg = <0xc5008000 0x4000>;
814817 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
815818 phy_type = "utmi";
@@ -824,6 +827,7 @@ · 8 unmodified lines
824827 compatible = "nvidia,tegra20-usb-phy";
825828 reg = <0xc5008000 0x4000>,
826829 <0xc5000000 0x4000>;
830+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
827831 phy_type = "utmi";
828832 clocks = <&tegra_car TEGRA20_CLK_USB3>,
829833 <&tegra_car TEGRA20_CLK_PLL_U>,
@@ -840,6 +844,7 @@ · 10 unmodified lines
840844 nvidia,xcvr-setup = <9>;
841845 nvidia,xcvr-lsfslew = <2>;
842846 nvidia,xcvr-lsrslew = <2>;
847+ nvidia,pmc = <&tegra_pmc 2>;
843848 status = "disabled";
844849 };
845850
arch/arm/boot/dts/tegra30-asus-nexus7-grouper-common.dtsi+27−3
@@ -819,6 +819,10 @@ · 818 unmodified lines
819819 bluetooth {
820820 compatible = "brcm,bcm4330-bt";
821821
822+ interrupt-parent = <&gpio>;
823+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
824+ interrupt-names = "host-wakeup";
825+
822826 max-speed = <4000000>;
823827
824828 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -828,7 +832,6 @@ · 3 unmodified lines
828832 vddio-supply = <&vdd_1v8>;
829833
830834 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
831− host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
832835 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
833836 };
834837 };
@@ -941,9 +944,29 @@ · 106 unmodified lines
941944 interrupts = <TEGRA_GPIO(V, 1) IRQ_TYPE_EDGE_BOTH>;
942945
943946 summit,enable-charge-control = <SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW>;
947+ summit,inok-polarity = <SMB3XX_SYSOK_INOK_ACTIVE_LOW>;
944948 summit,enable-usb-charging;
945949
946950 monitored-battery = <&battery_cell>;
951+
952+ usb_vbus: usb-vbus {
953+ regulator-name = "usb_vbus";
954+ regulator-min-microvolt = <5000000>;
955+ regulator-max-microvolt = <5000000>;
956+ regulator-min-microamp = <750000>;
957+ regulator-max-microamp = <750000>;
958+
959+ /*
960+ * SMB347 INOK input pin is connected to PMIC's
961+ * ACOK output, which is fixed to ACTIVE_LOW as
962+ * long as battery voltage is in a good range.
963+ *
964+ * Active INOK disables SMB347 output, so polarity
965+ * needs to be toggled when we want to get the
966+ * output.
967+ */
968+ summit,needs-inok-toggle;
969+ };
947970 };
948971 };
949972
@@ -1016,12 +1039,13 @@ · 66 unmodified lines
10161039 usb@7d000000 {
10171040 compatible = "nvidia,tegra30-udc";
10181041 status = "okay";
1019− dr_mode = "peripheral";
1042+ dr_mode = "otg";
1043+ vbus-supply = <&usb_vbus>;
10201044 };
10211045
10221046 usb-phy@7d000000 {
10231047 status = "okay";
1024− dr_mode = "peripheral";
1048+ dr_mode = "otg";
10251049 nvidia,hssync-start-delay = <0>;
10261050 nvidia,xcvr-lsfslew = <2>;
10271051 nvidia,xcvr-lsrslew = <2>;
arch/arm/boot/dts/tegra30-ouya.dts+4−1
@@ -93,6 +93,10 @@ · 92 unmodified lines
9393 bluetooth {
9494 compatible = "brcm,bcm4330-bt";
9595
96+ interrupt-parent = <&gpio>;
97+ interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
98+ interrupt-names = "host-wakeup";
99+
96100 max-speed = <4000000>;
97101
98102 clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
@@ -103,7 +107,6 @@ · 4 unmodified lines
103107
104108 shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
105109 device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
106− host-wakeup-gpios = <&gpio TEGRA_GPIO(U, 6) GPIO_ACTIVE_HIGH>;
107110 };
108111 };
109112
arch/arm/boot/dts/tegra30.dtsi+9−3
@@ -958,7 +958,7 @@ · 957 unmodified lines
958958 };
959959
960960 usb@7d000000 {
961− compatible = "nvidia,tegra30-ehci", "usb-ehci";
961+ compatible = "nvidia,tegra30-ehci";
962962 reg = <0x7d000000 0x4000>;
963963 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
964964 phy_type = "utmi";
@@ -974,6 +974,7 @@ · 9 unmodified lines
974974 compatible = "nvidia,tegra30-usb-phy";
975975 reg = <0x7d000000 0x4000>,
976976 <0x7d000000 0x4000>;
977+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
977978 phy_type = "utmi";
978979 clocks = <&tegra_car TEGRA30_CLK_USBD>,
979980 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -994,11 +995,12 @@ · 14 unmodified lines
994995 nvidia,hssquelch-level = <2>;
995996 nvidia,hsdiscon-level = <5>;
996997 nvidia,has-utmi-pad-registers;
998+ nvidia,pmc = <&tegra_pmc 0>;
997999 status = "disabled";
9981000 };
9991001
10001002 usb@7d004000 {
1001− compatible = "nvidia,tegra30-ehci", "usb-ehci";
1003+ compatible = "nvidia,tegra30-ehci";
10021004 reg = <0x7d004000 0x4000>;
10031005 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
10041006 phy_type = "utmi";
@@ -1013,6 +1015,7 @@ · 8 unmodified lines
10131015 compatible = "nvidia,tegra30-usb-phy";
10141016 reg = <0x7d004000 0x4000>,
10151017 <0x7d000000 0x4000>;
1018+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
10161019 phy_type = "utmi";
10171020 clocks = <&tegra_car TEGRA30_CLK_USB2>,
10181021 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1032,11 +1035,12 @@ · 13 unmodified lines
10321035 nvidia,xcvr-hsslew = <32>;
10331036 nvidia,hssquelch-level = <2>;
10341037 nvidia,hsdiscon-level = <5>;
1038+ nvidia,pmc = <&tegra_pmc 2>;
10351039 status = "disabled";
10361040 };
10371041
10381042 usb@7d008000 {
1039− compatible = "nvidia,tegra30-ehci", "usb-ehci";
1043+ compatible = "nvidia,tegra30-ehci";
10401044 reg = <0x7d008000 0x4000>;
10411045 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
10421046 phy_type = "utmi";
@@ -1051,6 +1055,7 @@ · 8 unmodified lines
10511055 compatible = "nvidia,tegra30-usb-phy";
10521056 reg = <0x7d008000 0x4000>,
10531057 <0x7d000000 0x4000>;
1058+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
10541059 phy_type = "utmi";
10551060 clocks = <&tegra_car TEGRA30_CLK_USB3>,
10561061 <&tegra_car TEGRA30_CLK_PLL_U>,
@@ -1070,6 +1075,7 @@ · 13 unmodified lines
10701075 nvidia,xcvr-hsslew = <32>;
10711076 nvidia,hssquelch-level = <2>;
10721077 nvidia,hsdiscon-level = <5>;
1078+ nvidia,pmc = <&tegra_pmc 1>;
10731079 status = "disabled";
10741080 };
10751081
arch/arm/boot/dts/versatile-ab-ib2.dts+5−1
@@ -13,9 +13,13 @@ · 12 unmodified lines
1313 syscon@27000000 {
1414 compatible = "arm,versatile-ib2-syscon", "syscon", "simple-mfd";
1515 reg = <0x27000000 0x4>;
16+ ranges = <0x0 0x27000000 0x4>;
17+ #address-cells = <1>;
18+ #size-cells = <1>;
1619
17− led@00.4 {
20+ led@0,4 {
1821 compatible = "register-bit-led";
22+ reg = <0x00 0x04>;
1923 offset = <0x00>;
2024 mask = <0x10>;
2125 label = "versatile-ib2:0";
arch/arm/boot/dts/versatile-ab.dts+19−8
@@ -70,61 +70,72 @@ · 69 unmodified lines
7070 core-module@10000000 {
7171 compatible = "arm,core-module-versatile", "syscon", "simple-mfd";
7272 reg = <0x10000000 0x200>;
73+ ranges = <0x0 0x10000000 0x200>;
74+ #address-cells = <1>;
75+ #size-cells = <1>;
7376
74− led@08.0 {
77+ led@8,0 {
7578 compatible = "register-bit-led";
79+ reg = <0x08 0x04>;
7680 offset = <0x08>;
7781 mask = <0x01>;
7882 label = "versatile:0";
7983 linux,default-trigger = "heartbeat";
8084 default-state = "on";
8185 };
82− led@08.1 {
86+ led@8,1 {
8387 compatible = "register-bit-led";
88+ reg = <0x08 0x04>;
8489 offset = <0x08>;
8590 mask = <0x02>;
8691 label = "versatile:1";
8792 linux,default-trigger = "mmc0";
8893 default-state = "off";
8994 };
90− led@08.2 {
95+ led@8,2 {
9196 compatible = "register-bit-led";
97+ reg = <0x08 0x04>;
9298 offset = <0x08>;
9399 mask = <0x04>;
94100 label = "versatile:2";
95101 linux,default-trigger = "cpu0";
96102 default-state = "off";
97103 };
98− led@08.3 {
104+ led@8,3 {
99105 compatible = "register-bit-led";
106+ reg = <0x08 0x04>;
100107 offset = <0x08>;
101108 mask = <0x08>;
102109 label = "versatile:3";
103110 default-state = "off";
104111 };
105− led@08.4 {
112+ led@8,4 {
106113 compatible = "register-bit-led";
114+ reg = <0x08 0x04>;
107115 offset = <0x08>;
108116 mask = <0x10>;
109117 label = "versatile:4";
110118 default-state = "off";
111119 };
112− led@08.5 {
120+ led@8,5 {
113121 compatible = "register-bit-led";
122+ reg = <0x08 0x04>;
114123 offset = <0x08>;
115124 mask = <0x20>;
116125 label = "versatile:5";
117126 default-state = "off";
118127 };
119− led@08.6 {
128+ led@8,6 {
120129 compatible = "register-bit-led";
130+ reg = <0x08 0x04>;
121131 offset = <0x08>;
122132 mask = <0x40>;
123133 label = "versatile:6";
124134 default-state = "off";
125135 };
126− led@08.7 {
136+ led@8,7 {
127137 compatible = "register-bit-led";
138+ reg = <0x08 0x04>;
128139 offset = <0x08>;
129140 mask = <0x80>;
130141 label = "versatile:7";
arch/arm/mach-qcom/Kconfig+10−0
@@ -21,6 +21,16 @@ config ARCH_MSM8X60 · 20 unmodified lines
2121 bool "Enable support for MSM8X60"
2222 select CLKSRC_QCOM
2323
24+config ARCH_MSM8916
25+ bool "Enable support for MSM8916"
26+ select HAVE_ARM_ARCH_TIMER
27+ help
28+ Enable support for the Qualcomm Snapdragon 410 (MSM8916/APQ8016).
29+
30+ Note that ARM64 is the main supported architecture for MSM8916.
31+ The ARM32 option is intended for a few devices with signed firmware
32+ that does not allow booting ARM64 kernels.
33+
2434 config ARCH_MSM8960
2535 bool "Enable support for MSM8960"
2636 select CLKSRC_QCOM
arch/arm64/boot/dts/allwinner/axp803.dtsi+5−5
@@ -10,7 +10,7 @@ · 9 unmodified lines
1010 interrupt-controller;
1111 #interrupt-cells = <1>;
1212
13− ac_power_supply: ac-power-supply {
13+ ac_power_supply: ac-power {
1414 compatible = "x-powers,axp803-ac-power-supply",
1515 "x-powers,axp813-ac-power-supply";
1616 status = "disabled";
@@ -26,18 +26,18 @@ · 9 unmodified lines
2626 gpio-controller;
2727 #gpio-cells = <2>;
2828
29− gpio0_ldo: gpio0-ldo {
29+ gpio0_ldo: gpio0-ldo-pin {
3030 pins = "GPIO0";
3131 function = "ldo";
3232 };
3333
34− gpio1_ldo: gpio1-ldo {
34+ gpio1_ldo: gpio1-ldo-pin {
3535 pins = "GPIO1";
3636 function = "ldo";
3737 };
3838 };
3939
40− battery_power_supply: battery-power-supply {
40+ battery_power_supply: battery-power {
4141 compatible = "x-powers,axp803-battery-power-supply",
4242 "x-powers,axp813-battery-power-supply";
4343 status = "disabled";
@@ -147,7 +147,7 @@ · 103 unmodified lines
147147 };
148148 };
149149
150− usb_power_supply: usb-power-supply {
150+ usb_power_supply: usb-power {
151151 compatible = "x-powers,axp803-usb-power-supply",
152152 "x-powers,axp813-usb-power-supply";
153153 status = "disabled";
arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi+3−3
@@ -343,19 +343,19 @@ · 342 unmodified lines
343343 };
344344
345345 thermal-zones {
346− cpu-thermal-zone {
346+ cpu-thermal {
347347 polling-delay-passive = <0>;
348348 polling-delay = <0>;
349349 thermal-sensors = <&ths 0>;
350350 };
351351
352− ddr-thermal-zone {
352+ ddr-thermal {
353353 polling-delay-passive = <0>;
354354 polling-delay = <0>;
355355 thermal-sensors = <&ths 2>;
356356 };
357357
358− gpu-thermal-zone {
358+ gpu-thermal {
359359 polling-delay-passive = <0>;
360360 polling-delay = <0>;
361361 thermal-sensors = <&ths 1>;
arch/arm64/boot/dts/allwinner/sun50i-a64-cpu-opp.dtsi+1−1
@@ -4,7 +4,7 @@ · 3 unmodified lines
44 */
55
66 / {
7− cpu0_opp_table: opp_table0 {
7+ cpu0_opp_table: opp-table-cpu {
88 compatible = "operating-points-v2";
99 opp-shared;
1010
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts+1−1
@@ -343,7 +343,7 @@ · 342 unmodified lines
343343 &spi0 {
344344 status = "okay";
345345
346− spi-flash@0 {
346+ flash@0 {
347347 compatible = "mxicy,mx25l1606e", "jedec,spi-nor";
348348 reg = <0>;
349349 spi-max-frequency = <80000000>;
arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts+27−1
@@ -35,6 +35,17 @@ · 34 unmodified lines
3535 stdout-path = "serial0:115200n8";
3636 };
3737
38+ hdmi-connector {
39+ compatible = "hdmi-connector";
40+ type = "c";
41+
42+ port {
43+ hdmi_con_in: endpoint {
44+ remote-endpoint = <&hdmi_out_con>;
45+ };
46+ };
47+ };
48+
3849 i2c-csi {
3950 compatible = "i2c-gpio";
4051 sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */
@@ -77,7 +88,7 @@ · 36 unmodified lines
7788 sound-name-prefix = "Speaker Amp";
7889 };
7990
80− vdd_bl: regulator@0 {
91+ vdd_bl: regulator {
8192 compatible = "regulator-fixed";
8293 regulator-name = "bl-3v3";
8394 regulator-min-microvolt = <3300000>;
@@ -410,6 +421,21 @@ · 326 unmodified lines
410421 regulator-name = "vcc-rtc";
411422 };
412423
424+&simplefb_hdmi {
425+ vcc-hdmi-supply = <&reg_dldo1>;
426+};
427+
428+&hdmi {
429+ hvcc-supply = <&reg_dldo1>;
430+ status = "okay";
431+};
432+
433+&hdmi_out {
434+ hdmi_out_con: endpoint {
435+ remote-endpoint = <&hdmi_con_in>;
436+ };
437+};
438+
413439 &sound {
414440 status = "okay";
415441 simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts+2−1
@@ -139,6 +139,8 @@ · 138 unmodified lines
139139 #size-cells = <0>;
140140
141141 port@0 {
142+ reg = <0>;
143+
142144 anx6345_in: endpoint {
143145 remote-endpoint = <&tcon0_out_anx6345>;
144146 };
@@ -206,7 +208,6 @@ · 61 unmodified lines
206208 reg = <0x3a3>;
207209 interrupt-parent = <&r_intc>;
208210 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
209− wakeup-source;
210211 };
211212 };
212213
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi+17−0
@@ -102,6 +102,22 @@ · 101 unmodified lines
102102 status = "disabled";
103103 };
104104
105+ gpu_opp_table: opp-table-gpu {
106+ compatible = "operating-points-v2";
107+
108+ opp-120000000 {
109+ opp-hz = /bits/ 64 <120000000>;
110+ };
111+
112+ opp-312000000 {
113+ opp-hz = /bits/ 64 <312000000>;
114+ };
115+
116+ opp-432000000 {
117+ opp-hz = /bits/ 64 <432000000>;
118+ };
119+ };
120+
105121 osc24M: osc24M_clk {
106122 #clock-cells = <0>;
107123 compatible = "fixed-clock";
@@ -1103,6 +1119,7 @@ · 995 unmodified lines
11031119 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
11041120 clock-names = "bus", "core";
11051121 resets = <&ccu RST_BUS_GPU>;
1122+ operating-points-v2 = <&gpu_opp_table>;
11061123 };
11071124
11081125 gic: interrupt-controller@1c81000 {
arch/arm64/boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi+1−1
@@ -2,7 +2,7 @@ · 1 unmodified line
22 // Copyright (C) 2020 Chen-Yu Tsai <wens@csie.org>
33
44 / {
5− cpu_opp_table: cpu-opp-table {
5+ cpu_opp_table: opp-table-cpu {
66 compatible = "operating-points-v2";
77 opp-shared;
88
arch/arm64/boot/dts/allwinner/sun50i-h5-nanopi-r1s-h5.dts+8−1
@@ -142,9 +142,16 @@ · 141 unmodified lines
142142 status = "okay";
143143
144144 eeprom@51 {
145− compatible = "microchip,24c02";
145+ compatible = "microchip,24c02", "atmel,24c02";
146146 reg = <0x51>;
147147 pagesize = <16>;
148+ read-only;
149+ #address-cells = <1>;
150+ #size-cells = <1>;
151+
152+ eth_mac1: mac-address@fa {
153+ reg = <0xfa 0x06>;
154+ };
148155 };
149156 };
150157
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi+1−1
@@ -217,7 +217,7 @@ · 216 unmodified lines
217217 };
218218 };
219219
220− gpu_thermal {
220+ gpu-thermal {
221221 polling-delay-passive = <0>;
222222 polling-delay = <0>;
223223 thermal-sensors = <&ths 1>;
arch/arm64/boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi+1−1
@@ -3,7 +3,7 @@ · 2 unmodified lines
33 // Copyright (C) 2020 Clément Péron <peron.clem@gmail.com>
44
55 / {
6− cpu_opp_table: cpu-opp-table {
6+ cpu_opp_table: opp-table-cpu {
77 compatible = "allwinner,sun50i-h6-operating-points";
88 nvmem-cells = <&cpu_speed_grade>;
99 opp-shared;
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi+4−4
@@ -119,10 +119,10 @@ · 118 unmodified lines
119119 display_clocks: clock@0 {
120120 compatible = "allwinner,sun50i-h6-de3-clk";
121121 reg = <0x0 0x10000>;
122− clocks = <&ccu CLK_DE>,
123− <&ccu CLK_BUS_DE>;
124− clock-names = "mod",
125− "bus";
122+ clocks = <&ccu CLK_BUS_DE>,
123+ <&ccu CLK_DE>;
124+ clock-names = "bus",
125+ "mod";
126126 resets = <&ccu RST_BUS_DE>;
127127 #clock-cells = <1>;
128128 #reset-cells = <1>;
arch/arm64/boot/dts/amlogic/Makefile+3−0
@@ -1,5 +1,7 @@
11 # SPDX-License-Identifier: GPL-2.0
22 dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
3+dtb-$(CONFIG_ARCH_MESON) += meson-axg-jethome-jethub-j100.dtb
4+dtb-$(CONFIG_ARCH_MESON) += meson-g12a-radxa-zero.dtb
35 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
46 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
57 dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
@@ -38,6 +40,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s805x-p241.dtb · 32 unmodified lines
3840 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-p281.dtb
3941 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-tx3-mini.dtb
4042 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-libretech-pc.dtb
43+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905w-jethome-jethub-j80.dtb
4144 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-khadas-vim2.dtb
4245 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-mecool-kiii-pro.dtb
4346 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-minix-neo-u9h.dtb
arch/arm64/boot/dts/amlogic/meson-axg-jethome-jethub-j100.dts+362−0
@@ -0,0 +1,362 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+/*
3+ * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
4+ * Copyright (c) 2020 JetHome
5+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
6+ * Author: Alexey Shevelkin <ash@tvip.ru>
7+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
8+ */
9+
10+/dts-v1/;
11+
12+#include "meson-axg.dtsi"
13+#include <dt-bindings/input/input.h>
14+#include <dt-bindings/thermal/thermal.h>
15+
16+/ {
17+ compatible = "jethome,jethub-j100", "amlogic,a113d", "amlogic,meson-axg";
18+ model = "JetHome JetHub J100";
19+ aliases {
20+ serial0 = &uart_AO; /* Console */
21+ serial1 = &uart_AO_B; /* External UART (Wireless Module) */
22+ ethernet0 = &ethmac;
23+ };
24+
25+ chosen {
26+ stdout-path = "serial0:115200n8";
27+ };
28+
29+ /* 1024MB RAM */
30+ memory@0 {
31+ device_type = "memory";
32+ reg = <0x0 0x0 0x0 0x40000000>;
33+ };
34+
35+ reserved-memory {
36+ linux,cma {
37+ size = <0x0 0x400000>;
38+ };
39+ };
40+
41+ emmc_pwrseq: emmc-pwrseq {
42+ compatible = "mmc-pwrseq-emmc";
43+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
44+ };
45+
46+ vcc_3v3: regulator-vcc_3v3 {
47+ compatible = "regulator-fixed";
48+ regulator-name = "VCC_3V3";
49+ regulator-min-microvolt = <3300000>;
50+ regulator-max-microvolt = <3300000>;
51+ vin-supply = <&vddao_3v3>;
52+ regulator-always-on;
53+ };
54+
55+ vcc_5v: regulator-vcc_5v {
56+ compatible = "regulator-fixed";
57+ regulator-name = "VCC5V";
58+ regulator-min-microvolt = <5000000>;
59+ regulator-max-microvolt = <5000000>;
60+ regulator-always-on;
61+ };
62+
63+ vddao_3v3: regulator-vddao_3v3 {
64+ compatible = "regulator-fixed";
65+ regulator-name = "VDDAO_3V3";
66+ regulator-min-microvolt = <3300000>;
67+ regulator-max-microvolt = <3300000>;
68+ vin-supply = <&vcc_5v>;
69+ regulator-always-on;
70+ };
71+
72+ vddio_ao18: regulator-vddio_ao18 {
73+ compatible = "regulator-fixed";
74+ regulator-name = "VDDIO_AO18";
75+ regulator-min-microvolt = <1800000>;
76+ regulator-max-microvolt = <1800000>;
77+ vin-supply = <&vddao_3v3>;
78+ regulator-always-on;
79+ };
80+
81+ vddio_boot: regulator-vddio_boot {
82+ compatible = "regulator-fixed";
83+ regulator-name = "VDDIO_BOOT";
84+ regulator-min-microvolt = <1800000>;
85+ regulator-max-microvolt = <1800000>;
86+ vin-supply = <&vddao_3v3>;
87+ regulator-always-on;
88+ };
89+
90+ usb_pwr: regulator-usb_pwr {
91+ compatible = "regulator-fixed";
92+ regulator-name = "USB_PWR";
93+ regulator-min-microvolt = <5000000>;
94+ regulator-max-microvolt = <5000000>;
95+ vin-supply = <&vcc_5v>;
96+ regulator-always-on;
97+ };
98+
99+ sdio_pwrseq: sdio-pwrseq {
100+ compatible = "mmc-pwrseq-simple";
101+ reset-gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
102+ clocks = <&wifi32k>;
103+ clock-names = "ext_clock";
104+ };
105+
106+ wifi32k: wifi32k {
107+ compatible = "pwm-clock";
108+ #clock-cells = <0>;
109+ clock-frequency = <32768>;
110+ pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
111+ };
112+
113+ thermal-zones {
114+ cpu_thermal: cpu-thermal {
115+ polling-delay-passive = <250>;
116+ polling-delay = <1000>;
117+ thermal-sensors = <&scpi_sensors 0>;
118+ trips {
119+ cpu_passive: cpu-passive {
120+ temperature = <70000>; /* millicelsius */
121+ hysteresis = <2000>; /* millicelsius */
122+ type = "passive";
123+ };
124+
125+ cpu_hot: cpu-hot {
126+ temperature = <80000>; /* millicelsius */
127+ hysteresis = <2000>; /* millicelsius */
128+ type = "hot";
129+ };
130+
131+ cpu_critical: cpu-critical {
132+ temperature = <100000>; /* millicelsius */
133+ hysteresis = <2000>; /* millicelsius */
134+ type = "critical";
135+ };
136+ };
137+ };
138+
139+ cpu_cooling_maps: cooling-maps {
140+ map0 {
141+ trip = <&cpu_passive>;
142+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
143+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
144+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
145+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
146+ };
147+
148+ map1 {
149+ trip = <&cpu_hot>;
150+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
151+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
152+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
153+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
154+ };
155+ };
156+ };
157+
158+ onewire {
159+ compatible = "w1-gpio";
160+ gpios = <&gpio GPIOA_14 GPIO_ACTIVE_HIGH>;
161+ #gpio-cells = <1>;
162+ };
163+};
164+
165+&efuse {
166+ sn: sn@32 {
167+ reg = <0x32 0x20>;
168+ };
169+
170+ eth_mac: eth_mac@0 {
171+ reg = <0x0 0x6>;
172+ };
173+
174+ bt_mac: bt_mac@6 {
175+ reg = <0x6 0x6>;
176+ };
177+
178+ wifi_mac: wifi_mac@c {
179+ reg = <0xc 0x6>;
180+ };
181+
182+ bid: bid@12 {
183+ reg = <0x12 0x20>;
184+ };
185+};
186+
187+&ethmac {
188+ status = "okay";
189+ pinctrl-0 = <&eth_rmii_x_pins>;
190+ pinctrl-names = "default";
191+ phy-handle = <&eth_phy0>;
192+ phy-mode = "rmii";
193+
194+ mdio {
195+ compatible = "snps,dwmac-mdio";
196+ #address-cells = <1>;
197+ #size-cells = <0>;
198+
199+ /* ICPlus IP101A/G Ethernet PHY (vendor_id=0x0243, model_id=0x0c54) */
200+ eth_phy0: ethernet-phy@0 {
201+ /* compatible = "ethernet-phy-id0243.0c54";*/
202+ max-speed = <100>;
203+ reg = <0>;
204+
205+ reset-assert-us = <10000>;
206+ reset-deassert-us = <10000>;
207+ reset-gpios = <&gpio GPIOZ_5 GPIO_ACTIVE_LOW>;
208+ };
209+ };
210+};
211+
212+/* Internal I2C bus (on CPU module) */
213+&i2c1 {
214+ status = "okay";
215+ pinctrl-0 = <&i2c1_z_pins>;
216+ pinctrl-names = "default";
217+
218+ /* RTC */
219+ pcf8563: pcf8563@51 {
220+ compatible = "nxp,pcf8563";
221+ reg = <0x51>;
222+ status = "okay";
223+ };
224+};
225+
226+/* Peripheral I2C bus (on motherboard) */
227+&i2c_AO {
228+ status = "okay";
229+ pinctrl-0 = <&i2c_ao_sck_10_pins>, <&i2c_ao_sda_11_pins>;
230+ pinctrl-names = "default";
231+};
232+
233+&pwm_ab {
234+ status = "okay";
235+ pinctrl-0 = <&pwm_a_x20_pins>;
236+ pinctrl-names = "default";
237+};
238+
239+/* wifi module */
240+&sd_emmc_b {
241+ status = "okay";
242+ #address-cells = <1>;
243+ #size-cells = <0>;
244+
245+ pinctrl-0 = <&sdio_pins>;
246+ pinctrl-1 = <&sdio_clk_gate_pins>;
247+ pinctrl-names = "default", "clk-gate";
248+
249+ bus-width = <4>;
250+ cap-sd-highspeed;
251+ sd-uhs-sdr104;
252+ max-frequency = <200000000>;
253+ non-removable;
254+ disable-wp;
255+
256+ mmc-pwrseq = <&sdio_pwrseq>;
257+
258+ vmmc-supply = <&vddao_3v3>;
259+ vqmmc-supply = <&vddio_boot>;
260+
261+ brcmf: wifi@1 {
262+ reg = <1>;
263+ compatible = "brcm,bcm4329-fmac";
264+ };
265+};
266+
267+/* emmc storage */
268+&sd_emmc_c {
269+ status = "okay";
270+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
271+ pinctrl-1 = <&emmc_clk_gate_pins>;
272+ pinctrl-names = "default", "clk-gate";
273+
274+ bus-width = <8>;
275+ cap-mmc-highspeed;
276+ max-frequency = <200000000>;
277+ non-removable;
278+ disable-wp;
279+ mmc-ddr-1_8v;
280+ mmc-hs200-1_8v;
281+
282+ mmc-pwrseq = <&emmc_pwrseq>;
283+
284+ vmmc-supply = <&vcc_3v3>;
285+ vqmmc-supply = <&vddio_boot>;
286+};
287+
288+/* UART Bluetooth */
289+&uart_B {
290+ status = "okay";
291+ pinctrl-0 = <&uart_b_z_pins>, <&uart_b_z_cts_rts_pins>;
292+ pinctrl-names = "default";
293+ uart-has-rtscts;
294+
295+ bluetooth {
296+ compatible = "brcm,bcm43438-bt";
297+ shutdown-gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
298+ };
299+};
300+
301+/* UART Console */
302+&uart_AO {
303+ status = "okay";
304+ pinctrl-0 = <&uart_ao_a_pins>;
305+ pinctrl-names = "default";
306+};
307+
308+/* UART Wireless module */
309+&uart_AO_B {
310+ status = "okay";
311+ pinctrl-0 = <&uart_ao_b_pins>;
312+ pinctrl-names = "default";
313+};
314+
315+&usb {
316+ status = "okay";
317+ phy-supply = <&usb_pwr>;
318+};
319+
320+&spicc1 {
321+ status = "okay";
322+ pinctrl-0 = <&spi1_x_pins>, <&spi1_ss0_x_pins>;
323+ pinctrl-names = "default";
324+};
325+
326+&gpio {
327+ gpio-line-names =
328+ "", "", "", "", "", // 0 - 4
329+ "", "", "", "", "", // 5 - 9
330+ "UserButton", "", "", "", "", // 10 - 14
331+ "", "", "", "", "", // 15 - 19
332+ "", "", "", "", "", // 20 - 24
333+ "", "LedRed", "LedGreen", "Output3", "Output2", // 25 - 29
334+ "Output1", "", "", "", "", // 30 - 34
335+ "", "ZigBeeBOOT", "", "", "", // 35 - 39
336+ "1Wire", "ZigBeeRESET", "", "Input4", "Input3", // 40 - 44
337+ "Input2", "Input1", "", "", "", // 45 - 49
338+ "", "", "", "", "", // 50 - 54
339+ "", "", "", "", "", // 55 - 59
340+ "", "", "", "", "", // 60 - 64
341+ "", "", "", "", "", // 65 - 69
342+ "", "", "", "", "", // 70 - 74
343+ "", "", "", "", "", // 75 - 79
344+ "", "", "", "", "", // 80 - 84
345+ "", ""; // 85-86
346+};
347+
348+&cpu0 {
349+ #cooling-cells = <2>;
350+};
351+
352+&cpu1 {
353+ #cooling-cells = <2>;
354+};
355+
356+&cpu2 {
357+ #cooling-cells = <2>;
358+};
359+
360+&cpu3 {
361+ #cooling-cells = <2>;
362+};
arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts+405−0
@@ -0,0 +1,405 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+/*
3+ * Copyright (c) 2018 BayLibre SAS. All rights reserved.
4+ */
5+
6+/dts-v1/;
7+
8+#include "meson-g12a.dtsi"
9+#include <dt-bindings/gpio/meson-g12a-gpio.h>
10+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
11+
12+/ {
13+ compatible = "radxa,zero", "amlogic,g12a";
14+ model = "Radxa Zero";
15+
16+ aliases {
17+ serial0 = &uart_AO;
18+ };
19+
20+ chosen {
21+ stdout-path = "serial0:115200n8";
22+ };
23+
24+ memory@0 {
25+ device_type = "memory";
26+ reg = <0x0 0x0 0x0 0x40000000>;
27+ };
28+
29+ cvbs-connector {
30+ status = "disabled";
31+ compatible = "composite-video-connector";
32+
33+ port {
34+ cvbs_connector_in: endpoint {
35+ remote-endpoint = <&cvbs_vdac_out>;
36+ };
37+ };
38+ };
39+
40+ hdmi-connector {
41+ compatible = "hdmi-connector";
42+ type = "a";
43+
44+ port {
45+ hdmi_connector_in: endpoint {
46+ remote-endpoint = <&hdmi_tx_tmds_out>;
47+ };
48+ };
49+ };
50+
51+ emmc_pwrseq: emmc-pwrseq {
52+ compatible = "mmc-pwrseq-emmc";
53+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
54+ };
55+
56+ sdio_pwrseq: sdio-pwrseq {
57+ compatible = "mmc-pwrseq-simple";
58+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
59+ clocks = <&wifi32k>;
60+ clock-names = "ext_clock";
61+ };
62+
63+ ao_5v: regulator-ao_5v {
64+ compatible = "regulator-fixed";
65+ regulator-name = "AO_5V";
66+ regulator-min-microvolt = <5000000>;
67+ regulator-max-microvolt = <5000000>;
68+ regulator-always-on;
69+ };
70+
71+ vcc_1v8: regulator-vcc_1v8 {
72+ compatible = "regulator-fixed";
73+ regulator-name = "VCC_1V8";
74+ regulator-min-microvolt = <1800000>;
75+ regulator-max-microvolt = <1800000>;
76+ vin-supply = <&vcc_3v3>;
77+ regulator-always-on;
78+ };
79+
80+ vcc_3v3: regulator-vcc_3v3 {
81+ compatible = "regulator-fixed";
82+ regulator-name = "VCC_3V3";
83+ regulator-min-microvolt = <3300000>;
84+ regulator-max-microvolt = <3300000>;
85+ vin-supply = <&vddao_3v3>;
86+ regulator-always-on;
87+ };
88+
89+ hdmi_pw: regulator-hdmi_pw {
90+ compatible = "regulator-fixed";
91+ regulator-name = "HDMI_PW";
92+ regulator-min-microvolt = <5000000>;
93+ regulator-max-microvolt = <5000000>;
94+ vin-supply = <&ao_5v>;
95+ regulator-always-on;
96+ };
97+
98+ vddao_1v8: regulator-vddao_1v8 {
99+ compatible = "regulator-fixed";
100+ regulator-name = "VDDAO_1V8";
101+ regulator-min-microvolt = <1800000>;
102+ regulator-max-microvolt = <1800000>;
103+ vin-supply = <&vddao_3v3>;
104+ regulator-always-on;
105+ };
106+
107+ vddao_3v3: regulator-vddao_3v3 {
108+ compatible = "regulator-fixed";
109+ regulator-name = "VDDAO_3V3";
110+ regulator-min-microvolt = <3300000>;
111+ regulator-max-microvolt = <3300000>;
112+ vin-supply = <&ao_5v>;
113+ regulator-always-on;
114+ };
115+
116+ vddcpu: regulator-vddcpu {
117+ compatible = "pwm-regulator";
118+
119+ regulator-name = "VDDCPU";
120+ regulator-min-microvolt = <721000>;
121+ regulator-max-microvolt = <1022000>;
122+
123+ vin-supply = <&ao_5v>;
124+
125+ pwms = <&pwm_AO_cd 1 1250 0>;
126+ pwm-dutycycle-range = <100 0>;
127+
128+ regulator-boot-on;
129+ regulator-always-on;
130+ };
131+
132+ sound {
133+ compatible = "amlogic,axg-sound-card";
134+ model = "RADXA-ZERO";
135+ audio-aux-devs = <&tdmout_b>;
136+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
137+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
138+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
139+ "TDM_B Playback", "TDMOUT_B OUT";
140+
141+ assigned-clocks = <&clkc CLKID_MPLL2>,
142+ <&clkc CLKID_MPLL0>,
143+ <&clkc CLKID_MPLL1>;
144+ assigned-clock-parents = <0>, <0>, <0>;
145+ assigned-clock-rates = <294912000>,
146+ <270950400>,
147+ <393216000>;
148+ status = "okay";
149+
150+ dai-link-0 {
151+ sound-dai = <&frddr_a>;
152+ };
153+
154+ dai-link-1 {
155+ sound-dai = <&frddr_b>;
156+ };
157+
158+ dai-link-2 {
159+ sound-dai = <&frddr_c>;
160+ };
161+
162+ /* 8ch hdmi interface */
163+ dai-link-3 {
164+ sound-dai = <&tdmif_b>;
165+ dai-format = "i2s";
166+ dai-tdm-slot-tx-mask-0 = <1 1>;
167+ dai-tdm-slot-tx-mask-1 = <1 1>;
168+ dai-tdm-slot-tx-mask-2 = <1 1>;
169+ dai-tdm-slot-tx-mask-3 = <1 1>;
170+ mclk-fs = <256>;
171+
172+ codec {
173+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
174+ };
175+ };
176+
177+ dai-link-4 {
178+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
179+
180+ codec {
181+ sound-dai = <&hdmi_tx>;
182+ };
183+ };
184+ };
185+
186+ wifi32k: wifi32k {
187+ compatible = "pwm-clock";
188+ #clock-cells = <0>;
189+ clock-frequency = <32768>;
190+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
191+ };
192+};
193+
194+&arb {
195+ status = "okay";
196+};
197+
198+&cec_AO {
199+ pinctrl-0 = <&cec_ao_a_h_pins>;
200+ pinctrl-names = "default";
201+ status = "disabled";
202+ hdmi-phandle = <&hdmi_tx>;
203+};
204+
205+&cecb_AO {
206+ pinctrl-0 = <&cec_ao_b_h_pins>;
207+ pinctrl-names = "default";
208+ status = "okay";
209+ hdmi-phandle = <&hdmi_tx>;
210+};
211+
212+&clkc_audio {
213+ status = "okay";
214+};
215+
216+&cpu0 {
217+ cpu-supply = <&vddcpu>;
218+ operating-points-v2 = <&cpu_opp_table>;
219+ clocks = <&clkc CLKID_CPU_CLK>;
220+ clock-latency = <50000>;
221+};
222+
223+&cpu1 {
224+ cpu-supply = <&vddcpu>;
225+ operating-points-v2 = <&cpu_opp_table>;
226+ clocks = <&clkc CLKID_CPU_CLK>;
227+ clock-latency = <50000>;
228+};
229+
230+&cpu2 {
231+ cpu-supply = <&vddcpu>;
232+ operating-points-v2 = <&cpu_opp_table>;
233+ clocks = <&clkc CLKID_CPU_CLK>;
234+ clock-latency = <50000>;
235+};
236+
237+&cpu3 {
238+ cpu-supply = <&vddcpu>;
239+ operating-points-v2 = <&cpu_opp_table>;
240+ clocks = <&clkc CLKID_CPU_CLK>;
241+ clock-latency = <50000>;
242+};
243+
244+&cvbs_vdac_port {
245+ cvbs_vdac_out: endpoint {
246+ remote-endpoint = <&cvbs_connector_in>;
247+ };
248+};
249+
250+&frddr_a {
251+ status = "okay";
252+};
253+
254+&frddr_b {
255+ status = "okay";
256+};
257+
258+&frddr_c {
259+ status = "okay";
260+};
261+
262+&hdmi_tx {
263+ status = "okay";
264+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
265+ pinctrl-names = "default";
266+ hdmi-supply = <&hdmi_pw>;
267+};
268+
269+&hdmi_tx_tmds_port {
270+ hdmi_tx_tmds_out: endpoint {
271+ remote-endpoint = <&hdmi_connector_in>;
272+ };
273+};
274+
275+&ir {
276+ status = "disabled";
277+ pinctrl-0 = <&remote_input_ao_pins>;
278+ pinctrl-names = "default";
279+};
280+
281+&pwm_AO_cd {
282+ pinctrl-0 = <&pwm_ao_d_e_pins>;
283+ pinctrl-names = "default";
284+ clocks = <&xtal>;
285+ clock-names = "clkin1";
286+ status = "okay";
287+};
288+
289+&pwm_ef {
290+ status = "okay";
291+ pinctrl-0 = <&pwm_e_pins>;
292+ pinctrl-names = "default";
293+ clocks = <&xtal>;
294+ clock-names = "clkin0";
295+};
296+
297+&saradc {
298+ status = "okay";
299+ vref-supply = <&vddao_1v8>;
300+};
301+
302+/* SDIO */
303+&sd_emmc_a {
304+ status = "okay";
305+ pinctrl-0 = <&sdio_pins>;
306+ pinctrl-1 = <&sdio_clk_gate_pins>;
307+ pinctrl-names = "default", "clk-gate";
308+ #address-cells = <1>;
309+ #size-cells = <0>;
310+
311+ bus-width = <4>;
312+ cap-sd-highspeed;
313+ sd-uhs-sdr50;
314+ max-frequency = <100000000>;
315+
316+ non-removable;
317+ disable-wp;
318+
319+ /* WiFi firmware requires power to be kept while in suspend */
320+ keep-power-in-suspend;
321+
322+ mmc-pwrseq = <&sdio_pwrseq>;
323+
324+ vmmc-supply = <&vddao_3v3>;
325+ vqmmc-supply = <&vddao_1v8>;
326+
327+ brcmf: wifi@1 {
328+ reg = <1>;
329+ compatible = "brcm,bcm4329-fmac";
330+ };
331+};
332+
333+/* SD card */
334+&sd_emmc_b {
335+ status = "okay";
336+ pinctrl-0 = <&sdcard_c_pins>;
337+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
338+ pinctrl-names = "default", "clk-gate";
339+
340+ bus-width = <4>;
341+ cap-sd-highspeed;
342+ max-frequency = <100000000>;
343+ disable-wp;
344+
345+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
346+ vmmc-supply = <&vddao_3v3>;
347+ vqmmc-supply = <&vddao_3v3>;
348+};
349+
350+/* eMMC */
351+&sd_emmc_c {
352+ status = "okay";
353+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
354+ pinctrl-1 = <&emmc_clk_gate_pins>;
355+ pinctrl-names = "default", "clk-gate";
356+
357+ bus-width = <8>;
358+ cap-mmc-highspeed;
359+ mmc-ddr-1_8v;
360+ mmc-hs200-1_8v;
361+ max-frequency = <200000000>;
362+ disable-wp;
363+
364+ mmc-pwrseq = <&emmc_pwrseq>;
365+ vmmc-supply = <&vcc_3v3>;
366+ vqmmc-supply = <&vcc_1v8>;
367+};
368+
369+&tdmif_b {
370+ status = "okay";
371+};
372+
373+&tdmout_b {
374+ status = "okay";
375+};
376+
377+&tohdmitx {
378+ status = "okay";
379+};
380+
381+&uart_A {
382+ status = "okay";
383+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
384+ pinctrl-names = "default";
385+ uart-has-rtscts;
386+
387+ bluetooth {
388+ compatible = "brcm,bcm43438-bt";
389+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
390+ max-speed = <2000000>;
391+ clocks = <&wifi32k>;
392+ clock-names = "lpo";
393+ };
394+};
395+
396+&uart_AO {
397+ status = "okay";
398+ pinctrl-0 = <&uart_ao_a_pins>;
399+ pinctrl-names = "default";
400+};
401+
402+&usb {
403+ status = "okay";
404+ dr_mode = "host";
405+};
arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139139 regulator-min-microvolt = <721000>;
140140 regulator-max-microvolt = <1022000>;
141141
142− vin-supply = <&dc_in>;
142+ pwm-supply = <&dc_in>;
143143
144144 pwms = <&pwm_AO_cd 1 1250 0>;
145145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139139 regulator-min-microvolt = <721000>;
140140 regulator-max-microvolt = <1022000>;
141141
142− vin-supply = <&main_12v>;
142+ pwm-supply = <&main_12v>;
143143
144144 pwms = <&pwm_AO_cd 1 1250 0>;
145145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts+1−1
@@ -139,7 +139,7 @@ · 138 unmodified lines
139139 regulator-min-microvolt = <721000>;
140140 regulator-max-microvolt = <1022000>;
141141
142− vin-supply = <&dc_in>;
142+ pwm-supply = <&dc_in>;
143143
144144 pwms = <&pwm_AO_cd 1 1250 0>;
145145 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi+2−2
@@ -18,7 +18,7 @@ · 17 unmodified lines
1818 regulator-min-microvolt = <690000>;
1919 regulator-max-microvolt = <1050000>;
2020
21− vin-supply = <&dc_in>;
21+ pwm-supply = <&dc_in>;
2222
2323 pwms = <&pwm_ab 0 1250 0>;
2424 pwm-dutycycle-range = <100 0>;
@@ -37,7 +37,7 @@ · 12 unmodified lines
3737 regulator-min-microvolt = <690000>;
3838 regulator-max-microvolt = <1050000>;
3939
40− vin-supply = <&vsys_3v3>;
40+ pwm-supply = <&vsys_3v3>;
4141
4242 pwms = <&pwm_AO_cd 1 1250 0>;
4343 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi+4−2
@@ -99,6 +99,8 @@ · 98 unmodified lines
9999 regulator-max-microvolt = <5000000>;
100100 regulator-always-on;
101101 vin-supply = <&main_12v>;
102+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
103+ enable-active-high;
102104 };
103105
104106 vcc_1v8: regulator-vcc_1v8 {
@@ -130,7 +132,7 @@ · 25 unmodified lines
130132 regulator-min-microvolt = <721000>;
131133 regulator-max-microvolt = <1022000>;
132134
133− vin-supply = <&main_12v>;
135+ pwm-supply = <&main_12v>;
134136
135137 pwms = <&pwm_ab 0 1250 0>;
136138 pwm-dutycycle-range = <100 0>;
@@ -149,7 +151,7 @@ · 12 unmodified lines
149151 regulator-min-microvolt = <721000>;
150152 regulator-max-microvolt = <1022000>;
151153
152− vin-supply = <&main_12v>;
154+ pwm-supply = <&main_12v>;
153155
154156 pwms = <&pwm_AO_cd 1 1250 0>;
155157 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi+2−2
@@ -96,7 +96,7 @@ · 95 unmodified lines
9696 regulator-min-microvolt = <721000>;
9797 regulator-max-microvolt = <1022000>;
9898
99− vin-supply = <&main_12v>;
99+ pwm-supply = <&main_12v>;
100100
101101 pwms = <&pwm_ab 0 1250 0>;
102102 pwm-dutycycle-range = <100 0>;
@@ -115,7 +115,7 @@ · 12 unmodified lines
115115 regulator-min-microvolt = <721000>;
116116 regulator-max-microvolt = <1022000>;
117117
118− vin-supply = <&main_12v>;
118+ pwm-supply = <&main_12v>;
119119
120120 pwms = <&pwm_AO_cd 1 1250 0>;
121121 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts+241−0
@@ -0,0 +1,241 @@
1+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2+/*
3+ * Copyright (c) 2021 Vyacheslav Bocharov <adeep@lexina.in>
4+ * Copyright (c) 2020 JetHome
5+ * Author: Aleksandr Kazantsev <ak@tvip.ru>
6+ * Author: Alexey Shevelkin <ash@tvip.ru>
7+ * Author: Vyacheslav Bocharov <adeep@lexina.in>
8+ */
9+
10+/dts-v1/;
11+
12+#include "meson-gxl.dtsi"
13+
14+/ {
15+ compatible = "jethome,jethub-j80", "amlogic,s905w", "amlogic,meson-gxl";
16+ model = "JetHome JetHub J80";
17+ memory@0 {
18+ device_type = "memory";
19+ reg = <0x0 0x0 0x0 0x40000000>;
20+ };
21+
22+ reserved-memory {
23+ linux,cma {
24+ size = <0x0 0x1000000>;
25+ };
26+ };
27+
28+ aliases {
29+ serial0 = &uart_AO; /* Console */
30+ serial1 = &uart_A; /* Bluetooth */
31+ serial2 = &uart_AO_B; /* Wireless module 1 */
32+ serial3 = &uart_C; /* Wireless module 2 */
33+ ethernet0 = &ethmac;
34+ };
35+
36+ chosen {
37+ stdout-path = "serial0:115200n8";
38+ };
39+
40+ vddio_ao18: regulator-vddio_ao18 {
41+ compatible = "regulator-fixed";
42+ regulator-name = "VDDIO_AO18";
43+ regulator-min-microvolt = <1800000>;
44+ regulator-max-microvolt = <1800000>;
45+ };
46+
47+ vddio_boot: regulator-vddio_boot {
48+ compatible = "regulator-fixed";
49+ regulator-name = "VDDIO_BOOT";
50+ regulator-min-microvolt = <1800000>;
51+ regulator-max-microvolt = <1800000>;
52+ };
53+
54+ vddao_3v3: regulator-vddao_3v3 {
55+ compatible = "regulator-fixed";
56+ regulator-name = "VDDAO_3V3";
57+ regulator-min-microvolt = <3300000>;
58+ regulator-max-microvolt = <3300000>;
59+ };
60+
61+ vcc_3v3: regulator-vcc_3v3 {
62+ compatible = "regulator-fixed";
63+ regulator-name = "VCC_3V3";
64+ regulator-min-microvolt = <3300000>;
65+ regulator-max-microvolt = <3300000>;
66+ };
67+
68+ emmc_pwrseq: emmc-pwrseq {
69+ compatible = "mmc-pwrseq-emmc";
70+ reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
71+ };
72+
73+ wifi32k: wifi32k {
74+ compatible = "pwm-clock";
75+ #clock-cells = <0>;
76+ clock-frequency = <32768>;
77+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
78+ };
79+
80+ sdio_pwrseq: sdio-pwrseq {
81+ compatible = "mmc-pwrseq-simple";
82+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
83+ clocks = <&wifi32k>;
84+ clock-names = "ext_clock";
85+ };
86+};
87+
88+&efuse {
89+ bt_mac: bt_mac@6 {
90+ reg = <0x6 0x6>;
91+ };
92+
93+ wifi_mac: wifi_mac@C {
94+ reg = <0xc 0x6>;
95+ };
96+};
97+
98+&sn {
99+ reg = <0x32 0x20>;
100+};
101+
102+&eth_mac {
103+ reg = <0x0 0x6>;
104+};
105+
106+&bid {
107+ reg = <0x12 0x20>;
108+};
109+
110+&usb {
111+ status = "okay";
112+ dr_mode = "host";
113+};
114+
115+&pwm_ef {
116+ status = "okay";
117+ pinctrl-0 = <&pwm_e_pins>;
118+ pinctrl-names = "default";
119+ clocks = <&clkc CLKID_FCLK_DIV4>;
120+ clock-names = "clkin0";
121+};
122+
123+&saradc {
124+ status = "okay";
125+ vref-supply = <&vddio_ao18>;
126+};
127+
128+/* Wireless SDIO Module */
129+&sd_emmc_a {
130+ status = "okay";
131+ pinctrl-0 = <&sdio_pins>;
132+ pinctrl-1 = <&sdio_clk_gate_pins>;
133+ pinctrl-names = "default", "clk-gate";
134+ #address-cells = <1>;
135+ #size-cells = <0>;
136+
137+ bus-width = <4>;
138+ cap-sd-highspeed;
139+ max-frequency = <50000000>;
140+
141+ non-removable;
142+ disable-wp;
143+
144+ /* WiFi firmware requires power to be kept while in suspend */
145+ keep-power-in-suspend;
146+
147+ mmc-pwrseq = <&sdio_pwrseq>;
148+
149+ vmmc-supply = <&vddao_3v3>;
150+ vqmmc-supply = <&vddio_boot>;
151+};
152+
153+/* SD card */
154+&sd_emmc_b {
155+ status = "okay";
156+ pinctrl-0 = <&sdcard_pins>;
157+ pinctrl-1 = <&sdcard_clk_gate_pins>;
158+ pinctrl-names = "default", "clk-gate";
159+
160+ bus-width = <4>;
161+ cap-sd-highspeed;
162+ max-frequency = <50000000>;
163+ disable-wp;
164+
165+ cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
166+
167+ vmmc-supply = <&vddao_3v3>;
168+ vqmmc-supply = <&vddio_boot>;
169+};
170+
171+/* eMMC */
172+&sd_emmc_c {
173+ status = "okay";
174+ pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>;
175+ pinctrl-1 = <&emmc_clk_gate_pins>;
176+ pinctrl-names = "default", "clk-gate";
177+
178+ bus-width = <8>;
179+ cap-mmc-highspeed;
180+ max-frequency = <200000000>;
181+ non-removable;
182+ disable-wp;
183+ mmc-ddr-1_8v;
184+ mmc-hs200-1_8v;
185+
186+ mmc-pwrseq = <&emmc_pwrseq>;
187+ vmmc-supply = <&vcc_3v3>;
188+ vqmmc-supply = <&vddio_boot>;
189+};
190+
191+/* Console UART */
192+&uart_AO {
193+ status = "okay";
194+ pinctrl-0 = <&uart_ao_a_pins>;
195+ pinctrl-names = "default";
196+};
197+
198+/* S905W only has access to its internal PHY */
199+&ethmac {
200+ status = "okay";
201+ phy-mode = "rmii";
202+ phy-handle = <&internal_phy>;
203+};
204+
205+&internal_phy {
206+ status = "okay";
207+ pinctrl-0 = <&eth_link_led_pins>, <&eth_act_led_pins>;
208+ pinctrl-names = "default";
209+};
210+
211+&uart_A {
212+ status = "okay";
213+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
214+ pinctrl-names = "default";
215+ uart-has-rtscts;
216+};
217+
218+&uart_C {
219+ status = "okay";
220+ pinctrl-0 = <&uart_c_pins>;
221+ pinctrl-names = "default";
222+};
223+
224+&uart_AO_B {
225+ status = "okay";
226+ pinctrl-0 = <&uart_ao_b_pins>, <&uart_ao_b_cts_rts_pins>;
227+ pinctrl-names = "default";
228+ uart-has-rtscts;
229+};
230+
231+&i2c_B {
232+ status = "okay";
233+ pinctrl-names = "default";
234+ pinctrl-0 = <&i2c_b_pins>;
235+
236+ pcf8563: pcf8563@51 {
237+ compatible = "nxp,pcf8563";
238+ reg = <0x51>;
239+ status = "okay";
240+ };
241+};
arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts+61−0
@@ -14,6 +14,7 @@ · 13 unmodified lines
1414 /dts-v1/;
1515
1616 #include "meson-gxm.dtsi"
17+#include <dt-bindings/sound/meson-aiu.h>
1718
1819 / {
1920 compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
@@ -33,6 +34,13 @@ · 13 unmodified lines
3334 reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
3435 };
3536
37+ spdif_dit: audio-codec-0 {
38+ #sound-dai-cells = <0>;
39+ compatible = "linux,spdif-dit";
40+ status = "okay";
41+ sound-name-prefix = "DIT";
42+ };
43+
3644 leds {
3745 compatible = "gpio-leds";
3846
@@ -90,6 +98,59 @@ · 51 unmodified lines
9098 clocks = <&wifi32k>;
9199 clock-names = "ext_clock";
92100 };
101+
102+ sound {
103+ compatible = "amlogic,gx-sound-card";
104+ model = "RBOX-PRO";
105+ assigned-clocks = <&clkc CLKID_MPLL0>,
106+ <&clkc CLKID_MPLL1>,
107+ <&clkc CLKID_MPLL2>;
108+ assigned-clock-parents = <0>, <0>, <0>;
109+ assigned-clock-rates = <294912000>,
110+ <270950400>,
111+ <393216000>;
112+ status = "okay";
113+
114+ dai-link-0 {
115+ sound-dai = <&aiu AIU_CPU CPU_I2S_FIFO>;
116+ };
117+
118+ dai-link-1 {
119+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_FIFO>;
120+ };
121+
122+ dai-link-2 {
123+ sound-dai = <&aiu AIU_CPU CPU_I2S_ENCODER>;
124+ dai-format = "i2s";
125+ mclk-fs = <256>;
126+
127+ codec-0 {
128+ sound-dai = <&aiu AIU_HDMI CTRL_I2S>;
129+ };
130+ };
131+
132+ dai-link-3 {
133+ sound-dai = <&aiu AIU_CPU CPU_SPDIF_ENCODER>;
134+
135+ codec-0 {
136+ sound-dai = <&spdif_dit>;
137+ };
138+ };
139+
140+ dai-link-4 {
141+ sound-dai = <&aiu AIU_HDMI CTRL_OUT>;
142+
143+ codec-0 {
144+ sound-dai = <&hdmi_tx>;
145+ };
146+ };
147+ };
148+};
149+
150+&aiu {
151+ status = "okay";
152+ pinctrl-0 = <&spdif_out_h_pins>;
153+ pinctrl-names = "default";
93154 };
94155
95156 &ethmac {
arch/arm64/boot/dts/amlogic/meson-sm1-bananapi-m5.dts+1−1
@@ -173,7 +173,7 @@ · 172 unmodified lines
173173 regulator-min-microvolt = <690000>;
174174 regulator-max-microvolt = <1050000>;
175175
176− vin-supply = <&dc_in>;
176+ pwm-supply = <&dc_in>;
177177
178178 pwms = <&pwm_AO_cd 1 1250 0>;
179179 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts+1−1
@@ -24,7 +24,7 @@ · 23 unmodified lines
2424 regulator-min-microvolt = <690000>;
2525 regulator-max-microvolt = <1050000>;
2626
27− vin-supply = <&vsys_3v3>;
27+ pwm-supply = <&vsys_3v3>;
2828
2929 pwms = <&pwm_AO_cd 1 1250 0>;
3030 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/amlogic/meson-sm1-odroid.dtsi+5−1
@@ -116,7 +116,7 @@ · 115 unmodified lines
116116 regulator-min-microvolt = <721000>;
117117 regulator-max-microvolt = <1022000>;
118118
119− vin-supply = <&main_12v>;
119+ pwm-supply = <&main_12v>;
120120
121121 pwms = <&pwm_AO_cd 1 1250 0>;
122122 pwm-dutycycle-range = <100 0>;
@@ -263,6 +263,10 @@ · 140 unmodified lines
263263 reg = <0>;
264264 max-speed = <1000>;
265265
266+ reset-assert-us = <10000>;
267+ reset-deassert-us = <80000>;
268+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
269+
266270 interrupt-parent = <&gpio_intc>;
267271 /* MAC_INTR on GPIOZ_14 */
268272 interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts+1−1
@@ -185,7 +185,7 @@ · 184 unmodified lines
185185 regulator-min-microvolt = <690000>;
186186 regulator-max-microvolt = <1050000>;
187187
188− vin-supply = <&dc_in>;
188+ pwm-supply = <&dc_in>;
189189
190190 pwms = <&pwm_AO_cd 1 1500 0>;
191191 pwm-dutycycle-range = <100 0>;
arch/arm64/boot/dts/apple/t8103-j274.dts+23−0
@@ -17,6 +17,7 @@ · 16 unmodified lines
1717
1818 aliases {
1919 serial0 = &serial0;
20+ ethernet0 = &ethernet0;
2021 };
2122
2223 chosen {
@@ -43,3 +44,25 @@ · 20 unmodified lines
4344 &serial0 {
4445 status = "okay";
4546 };
47+
48+/*
49+ * Force the bus number assignments so that we can declare some of the
50+ * on-board devices and properties that are populated by the bootloader
51+ * (such as MAC addresses).
52+ */
53+&port00 {
54+ bus-range = <1 1>;
55+};
56+
57+&port01 {
58+ bus-range = <2 2>;
59+};
60+
61+&port02 {
62+ bus-range = <3 3>;
63+ ethernet0: pci@0,0 {
64+ reg = <0x30000 0x0 0x0 0x0 0x0>;
65+ /* To be filled by the loader */
66+ local-mac-address = [00 10 18 00 00 00];
67+ };
68+};
arch/arm64/boot/dts/apple/t8103.dtsi+207−0
@@ -9,6 +9,7 @@ · 8 unmodified lines
99
1010 #include <dt-bindings/interrupt-controller/apple-aic.h>
1111 #include <dt-bindings/interrupt-controller/irq.h>
12+#include <dt-bindings/pinctrl/apple.h>
1213
1314 / {
1415 compatible = "apple,t8103", "apple,arm-platform";
@@ -131,5 +132,211 @@ · 116 unmodified lines
131132 interrupt-controller;
132133 reg = <0x2 0x3b100000 0x0 0x8000>;
133134 };
135+
136+ pinctrl_ap: pinctrl@23c100000 {
137+ compatible = "apple,t8103-pinctrl", "apple,pinctrl";
138+ reg = <0x2 0x3c100000 0x0 0x100000>;
139+
140+ gpio-controller;
141+ #gpio-cells = <2>;
142+ gpio-ranges = <&pinctrl_ap 0 0 212>;
143+ apple,npins = <212>;
144+
145+ interrupt-controller;
146+ interrupt-parent = <&aic>;
147+ interrupts = <AIC_IRQ 190 IRQ_TYPE_LEVEL_HIGH>,
148+ <AIC_IRQ 191 IRQ_TYPE_LEVEL_HIGH>,
149+ <AIC_IRQ 192 IRQ_TYPE_LEVEL_HIGH>,
150+ <AIC_IRQ 193 IRQ_TYPE_LEVEL_HIGH>,
151+ <AIC_IRQ 194 IRQ_TYPE_LEVEL_HIGH>,
152+ <AIC_IRQ 195 IRQ_TYPE_LEVEL_HIGH>,
153+ <AIC_IRQ 196 IRQ_TYPE_LEVEL_HIGH>;
154+
155+ pcie_pins: pcie-pins {
156+ pinmux = <APPLE_PINMUX(150, 1)>,
157+ <APPLE_PINMUX(151, 1)>,
158+ <APPLE_PINMUX(32, 1)>;
159+ };
160+ };
161+
162+ pinctrl_aop: pinctrl@24a820000 {
163+ compatible = "apple,t8103-pinctrl", "apple,pinctrl";
164+ reg = <0x2 0x4a820000 0x0 0x4000>;
165+
166+ gpio-controller;
167+ #gpio-cells = <2>;
168+ gpio-ranges = <&pinctrl_aop 0 0 42>;
169+ apple,npins = <42>;
170+
171+ interrupt-controller;
172+ interrupt-parent = <&aic>;
173+ interrupts = <AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>,
174+ <AIC_IRQ 269 IRQ_TYPE_LEVEL_HIGH>,
175+ <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>,
176+ <AIC_IRQ 271 IRQ_TYPE_LEVEL_HIGH>,
177+ <AIC_IRQ 272 IRQ_TYPE_LEVEL_HIGH>,
178+ <AIC_IRQ 273 IRQ_TYPE_LEVEL_HIGH>,
179+ <AIC_IRQ 274 IRQ_TYPE_LEVEL_HIGH>;
180+ };
181+
182+ pinctrl_nub: pinctrl@23d1f0000 {
183+ compatible = "apple,t8103-pinctrl", "apple,pinctrl";
184+ reg = <0x2 0x3d1f0000 0x0 0x4000>;
185+
186+ gpio-controller;
187+ #gpio-cells = <2>;
188+ gpio-ranges = <&pinctrl_nub 0 0 23>;
189+ apple,npins = <23>;
190+
191+ interrupt-controller;
192+ interrupt-parent = <&aic>;
193+ interrupts = <AIC_IRQ 330 IRQ_TYPE_LEVEL_HIGH>,
194+ <AIC_IRQ 331 IRQ_TYPE_LEVEL_HIGH>,
195+ <AIC_IRQ 332 IRQ_TYPE_LEVEL_HIGH>,
196+ <AIC_IRQ 333 IRQ_TYPE_LEVEL_HIGH>,
197+ <AIC_IRQ 334 IRQ_TYPE_LEVEL_HIGH>,
198+ <AIC_IRQ 335 IRQ_TYPE_LEVEL_HIGH>,
199+ <AIC_IRQ 336 IRQ_TYPE_LEVEL_HIGH>;
200+ };
201+
202+ pinctrl_smc: pinctrl@23e820000 {
203+ compatible = "apple,t8103-pinctrl", "apple,pinctrl";
204+ reg = <0x2 0x3e820000 0x0 0x4000>;
205+
206+ gpio-controller;
207+ #gpio-cells = <2>;
208+ gpio-ranges = <&pinctrl_smc 0 0 16>;
209+ apple,npins = <16>;
210+
211+ interrupt-controller;
212+ interrupt-parent = <&aic>;
213+ interrupts = <AIC_IRQ 391 IRQ_TYPE_LEVEL_HIGH>,
214+ <AIC_IRQ 392 IRQ_TYPE_LEVEL_HIGH>,
215+ <AIC_IRQ 393 IRQ_TYPE_LEVEL_HIGH>,
216+ <AIC_IRQ 394 IRQ_TYPE_LEVEL_HIGH>,
217+ <AIC_IRQ 395 IRQ_TYPE_LEVEL_HIGH>,
218+ <AIC_IRQ 396 IRQ_TYPE_LEVEL_HIGH>,
219+ <AIC_IRQ 397 IRQ_TYPE_LEVEL_HIGH>;

123 more lines aren’t shown here.

arch/arm64/boot/dts/arm/juno-motherboard.dtsi+19−8

This diff is large: its 84 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/Makefile+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/bcm2711-rpi-cm4-io.dts+2−0

This diff is large: its 3 lines aren’t shown here.

arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi+8−8

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/exynos/Makefile+2−1

This diff is large: its 7 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-bus.dtsi+5−5

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-tm2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynos5433.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9-pinctrl.dtsi+1189−0

This diff is large: its 1190 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9-sadk.dts+56−0

This diff is large: its 57 lines aren’t shown here.

arch/arm64/boot/dts/exynos/exynosautov9.dtsi+306−0

This diff is large: its 307 lines aren’t shown here.

arch/arm64/boot/dts/freescale/Makefile+4−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var1.dts+28−32

This diff is large: its 80 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts+4−13

This diff is large: its 40 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var4.dts+23−26

This diff is large: its 65 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts+18−13

This diff is large: its 53 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts+9−1

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts+10−9

This diff is large: its 42 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi+45−27

This diff is large: its 140 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi+20−20

This diff is large: its 103 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi+20−20

This diff is large: its 103 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3-rev-a.dts+34−0

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts+658−0

This diff is large: its 659 lines aren’t shown here.

arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi+12−12

This diff is large: its 31 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts+29−3

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi+3−1

This diff is large: its 25 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw71xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts+24−0

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mm.dtsi+180−0

This diff is large: its 222 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mp.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi+43−3

This diff is large: its 124 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-mnt-reform2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi+2−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/freescale/imx8mq.dtsi+4−6

This diff is large: its 26 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g2.dtsi+124−0

This diff is large: its 125 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g274a-evb.dts+34−0

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts+40−0

This diff is large: its 41 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3660.dtsi+4−4

This diff is large: its 36 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3670-hikey970.dts+3−19

This diff is large: its 43 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi3670.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hi6220.dtsi+2−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/hisilicon/hikey970-pmic.dtsi+86−0

This diff is large: its 87 lines aren’t shown here.

arch/arm64/boot/dts/marvell/Makefile+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts+458−0

This diff is large: its 459 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt2712e.dtsi+50−47

This diff is large: its 115 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt6358.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts+7−9

This diff is large: its 26 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts+1−5

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt7622.dtsi+60−52

This diff is large: its 136 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8173.dtsi+2−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi+54−0

This diff is large: its 55 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-max98357a.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e-rt1015p.dtsi+13−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi+32−0

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-burnet.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-damu.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-fennel.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-juniper-sku16.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kappa.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-kenzo.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku0.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi-willow-sku1.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi+5−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi+63−4

This diff is large: its 90 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8183.dtsi+96−3

This diff is large: its 134 lines aren’t shown here.

arch/arm64/boot/dts/mediatek/mt8192.dtsi+163−0

This diff is large: its 239 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra132-norrin.dts+0−2

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra132.dtsi+9−3

This diff is large: its 69 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts+1399−155

This diff is large: its 1840 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186-p3509-0000+p3636-0001.dts+505−1

This diff is large: its 518 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra186.dtsi+136−0

This diff is large: its 150 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts+1368−127

This diff is large: its 1679 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194-p3509-0000.dtsi+1383−139

This diff is large: its 1738 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra194.dtsi+204−5

This diff is large: its 269 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210-p2371-2180.dts+876−0

This diff is large: its 897 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts+876−0

This diff is large: its 897 lines aren’t shown here.

arch/arm64/boot/dts/nvidia/tegra210.dtsi+79−2

This diff is large: its 102 lines aren’t shown here.

arch/arm64/boot/dts/qcom/Makefile+12−0

This diff is large: its 53 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8016-sbc.dts+831−1

This diff is large: its 841 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi+0−826

This diff is large: its 827 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8094-sony-xperia-kitakami-karin_windy.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-db820c.dts+1069−1

This diff is large: its 1079 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi+0−1105

This diff is large: its 1106 lines aren’t shown here.

arch/arm64/boot/dts/qcom/apq8096-ifc6640.dts+0−3

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq6018.dtsi+87−6

This diff is large: its 121 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq8074-hk01.dts+6−0

This diff is large: its 24 lines aren’t shown here.

arch/arm64/boot/dts/qcom/ipq8074.dtsi+76−16

This diff is large: its 183 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dts+126−0

This diff is large: its 165 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts+44−19

This diff is large: its 146 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-mtp.dts+14−1

This diff is large: its 24 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-mtp.dtsi+0−21

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dts+534−0

This diff is large: its 535 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8916.dtsi+73−16

This diff is large: its 186 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-msft-lumia-octagon-talkman.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-ivy.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-karin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-satsuki.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-suzuran.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8994.dtsi+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-mtp.dts+23−1

This diff is large: its 33 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-mtp.dtsi+0−30

This diff is large: its 31 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-dora.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-kagura.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone-keyaki.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi+673−0

This diff is large: its 674 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts+465−0

This diff is large: its 466 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts+432−0

This diff is large: its 433 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8996.dtsi+86−10

This diff is large: its 218 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts+320−0

This diff is large: its 321 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi+0−4

This diff is large: its 11 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi+0−4

This diff is large: its 11 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts+31−0

This diff is large: its 32 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts+55−0

This diff is large: its 56 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts+36−0

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi+670−0

This diff is large: its 671 lines aren’t shown here.

arch/arm64/boot/dts/qcom/msm8998.dtsi+200−23

This diff is large: its 354 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm6150l.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm6350.dtsi+54−0

This diff is large: its 55 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm660.dtsi+3−2

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm660l.dtsi+0−7

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm8916.dtsi+12−6

This diff is large: its 39 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pm8994.dtsi+4−9

This diff is large: its 23 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmi8994.dtsi+1−4

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmi8998.dtsi+12−0

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/qcom/pmk8350.dtsi+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/qcs404.dtsi+6−1

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/qrb5165-rb5.dts+2−2

This diff is large: its 19 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sa8155p-adp.dts+10−2

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts+14−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi+2−1

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts+20−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts+15−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi+336−0

This diff is large: its 337 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi+13−0

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi+11−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-parade-ps8640.dtsi+109−0

This diff is large: its 110 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts+8−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi+5−4

This diff is large: its 44 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor-ti-sn65dsi86.dtsi+90−0

This diff is large: its 91 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi+2−99

This diff is large: its 141 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7180.dtsi+52−33

This diff is large: its 255 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-herobrine.dts+14−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi+1412−0

This diff is large: its 1413 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp.dts+12−0

This diff is large: its 19 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp.dtsi+265−6

This diff is large: its 330 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280-idp2.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sc7280.dtsi+2769−793

This diff is large: its 3898 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-ganges-kirin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-discovery.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-pioneer.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile-voyager.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi+4−4

This diff is large: its 35 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm630.dtsi+57−1

This diff is large: its 79 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm660-xiaomi-lavender.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi+12−5

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-db845c.dts+11−5

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-mtp.dts+10−8

This diff is large: its 54 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi+17−9

This diff is large: its 82 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium.dts+11−8

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm845.dtsi+73−170

This diff is large: its 498 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts+16−5

This diff is large: its 79 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6125.dtsi+32−27

This diff is large: its 142 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts+58−0

This diff is large: its 59 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm6350.dtsi+965−0

This diff is large: its 966 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts+320−0

This diff is large: its 321 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm7225.dtsi+16−0

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-microsoft-surface-duo.dts+1−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-mtp.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-bahamut.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150-sony-xperia-kumano-griffin.dts+1−0

This diff is large: its 6 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8150.dtsi+142−19

This diff is large: its 270 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-mtp.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx206.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8250.dtsi+26−26

This diff is large: its 161 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350-hdk.dts+0−2

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350-mtp.dts+4−2

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/qcom/sm8350.dtsi+282−20

This diff is large: its 488 lines aren’t shown here.

arch/arm64/boot/dts/renesas/Makefile+2−0

This diff is large: its 7 lines aren’t shown here.

arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi+3−0

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/renesas/cat875.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/draak.dtsi+686−0

This diff is large: its 687 lines aren’t shown here.

arch/arm64/boot/dts/renesas/ebisu.dtsi+803−0

This diff is large: its 804 lines aren’t shown here.

arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77961.dtsi+11−0

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77980-condor.dts+4−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts+4−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts+1−787

This diff is large: its 797 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a77995-draak.dts+1−670

This diff is large: its 680 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0-falcon-cpu.dtsi+70−0

This diff is large: its 104 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0-falcon.dts+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779a0.dtsi+1458−0

This diff is large: its 1489 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m0.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m1.dtsi+9−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m2.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m3.dtsi+9−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m4.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m5-salvator-xs.dts+36−0

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m5.dtsi+21−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m6.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m7.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r8a779m8.dtsi+12−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r9a07g044.dtsi+337−0

This diff is large: its 372 lines aren’t shown here.

arch/arm64/boot/dts/renesas/r9a07g044l2-smarc.dts+1−6

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi+275−0

This diff is large: its 276 lines aren’t shown here.

arch/arm64/boot/dts/renesas/rzg2l-smarc.dtsi+289−3

This diff is large: its 312 lines aren’t shown here.

arch/arm64/boot/dts/renesas/salvator-common.dtsi+30−26

This diff is large: its 85 lines aren’t shown here.

arch/arm64/boot/dts/renesas/ulcb.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/Makefile+6−0

This diff is large: its 34 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/px30-evb.dts+52−0

This diff is large: its 73 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/px30.dtsi+120−6

This diff is large: its 203 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3308.dtsi+43−6

This diff is large: its 105 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3318-a95x-z2.dts+0−3

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts+27−1

This diff is large: its 56 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts+110−0

This diff is large: its 111 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328-rock64.dts+1−1

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3328.dtsi+6−11

This diff is large: its 94 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi+33−14

This diff is large: its 109 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3368.dtsi+182−9

This diff is large: its 281 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi+176−0

This diff is large: its 183 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts+1−0

This diff is large: its 8 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet-dumo.dts+41−0

This diff is large: its 42 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi+182−0

This diff is large: its 196 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi+2−2

This diff is large: its 18 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts+36−0

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi+3−3

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts+2−5

This diff is large: its 28 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts+218−0

This diff is large: its 219 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4.dtsi+54−0

This diff is large: its 82 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4a-plus.dts+14−0

This diff is large: its 15 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4b-plus.dts+47−0

This diff is large: its 48 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi+29−0

This diff is large: its 43 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3399.dtsi+104−12

This diff is large: its 239 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts+548−0

This diff is large: its 549 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3566.dtsi+20−0

This diff is large: its 21 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts+313−0

This diff is large: its 331 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi+9−0

This diff is large: its 14 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk3568.dtsi+74−570

This diff is large: its 666 lines aren’t shown here.

arch/arm64/boot/dts/rockchip/rk356x.dtsi+1145−0

This diff is large: its 1146 lines aren’t shown here.

arch/arm64/boot/dts/ti/Makefile+3−1

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64-main.dtsi+280−0

This diff is large: its 285 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64-mcu.dtsi+8−0

This diff is large: its 13 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am64.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am642-evm.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am642-sk.dts+8−0

This diff is large: its 12 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg1.dtsi+46−0

This diff is large: its 47 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi+51−0

This diff is large: its 52 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi+28−11

This diff is large: its 86 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-main.dtsi+4−4

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi+0−4

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am65.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-common.dtsi+60−0

This diff is large: its 61 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dts+24−0

This diff is large: its 25 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dts+7−49

This diff is large: its 71 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am654.dtsi+4−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi+56−0

This diff is large: its 57 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dts+29−0

This diff is large: its 30 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dts+7−43

This diff is large: its 65 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200-main.dtsi+4−3

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j7200.dtsi+2−0

This diff is large: its 9 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-main.dtsi+8−8

This diff is large: its 72 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e-sk.dts+1002−0

This diff is large: its 1003 lines aren’t shown here.

arch/arm64/boot/dts/ti/k3-j721e.dtsi+3−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/Makefile+1−0

This diff is large: its 4 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-rm-mbrc.dts+6−0

This diff is large: its 10 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrb.dts+61−0

This diff is large: its 62 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708-visrobo-vrc.dtsi+44−0

This diff is large: its 45 lines aren’t shown here.

arch/arm64/boot/dts/toshiba/tmpv7708.dtsi+59−0

This diff is large: its 87 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/Makefile+14−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi+12−1

This diff is large: its 27 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dts+315−0

This diff is large: its 316 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dts+298−0

This diff is large: its 299 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts+289−0

This diff is large: its 290 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-smk-k26-revA.dts+21−0

This diff is large: its 22 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1232-revA.dts+15−1

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1254-revA.dts+15−1

This diff is large: its 37 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1275-revA.dts+17−1

This diff is large: its 39 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm015-dc1.dts+297−1

This diff is large: its 380 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts+337−5

This diff is large: its 444 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts+48−1

This diff is large: its 104 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm018-dc4.dts+23−1

This diff is large: its 49 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm019-dc5.dts+329−1

This diff is large: its 393 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts+258−6

This diff is large: its 362 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-rev1.1.dts+15−0

This diff is large: its 16 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts+318−2

This diff is large: its 426 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revB.dts+2−1

This diff is large: its 17 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts+282−10

This diff is large: its 400 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts+239−11

This diff is large: its 347 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts+327−13

This diff is large: its 443 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts+264−10

This diff is large: its 378 lines aren’t shown here.

arch/arm64/boot/dts/xilinx/zynqmp.dtsi+61−32

This diff is large: its 176 lines aren’t shown here.

drivers/watchdog/mtk_wdt.c+3−3

This diff is large: its 13 lines aren’t shown here.

include/dt-bindings/power/imx8mm-power.h+9−0

This diff is large: its 14 lines aren’t shown here.

include/dt-bindings/reset/mt2712-resets.hrenamed from include/dt-bindings/reset-controller/mt2712-resets.h+0−0

File renamed without changes.

include/dt-bindings/reset/mt8173-resets.h+2−0

This diff is large: its 9 lines aren’t shown here.

include/dt-bindings/reset/mt8183-resets.hrenamed from include/dt-bindings/reset-controller/mt8183-resets.h+3−0

This diff is large: its 10 lines aren’t shown here.

include/dt-bindings/reset/mt8192-resets.hrenamed from include/dt-bindings/reset-controller/mt8192-resets.h+0−0

File renamed without changes.

Keyboard shortcuts

General

Show keyboard shortcuts
?
Focus the current search
/

Issues and pull requests

Open filters
f

Issues, pull requests and Inbox

Select next item
j↓
Select previous item
k↑
Open selected item
Enter
Dismiss filters or clear selection
Esc

Repository code

Go to file
t