tree-wide: fix comment/printk typos

"gadget", "through", "command", "maintain", "maintain", "controller", "address", "between", "initiali[zs]e", "instead", "function", "select", "already", "equal", "access", "management", "hierarchy", "registration", "interest", "relative", "memory", "offset", "already",

Uwe Kleine-König committed 16 years ago

Commit b5950761 parent 6aaccec207 files · +261 −261Browse files

Unified · Split

207 files

Documentation/DocBook/mtdnand.tmpl +1 −1
Documentation/cgroups/cgroup_event_listener.c +1 −1
Documentation/cgroups/memcg_test.txt +1 −1
Documentation/kprobes.txt +1 −1
Documentation/kvm/api.txt +1 −1
Documentation/networking/caif/spi_porting.txt +1 −1
Documentation/powerpc/booting-without-of.txt +1 −1
Documentation/scsi/ChangeLog.lpfc +1 −1
Documentation/timers/timer_stats.txt +1 −1
arch/arm/common/it8152.c +1 −1
arch/arm/common/vic.c +1 −1
arch/arm/mach-at91/board-ecbat91.c +3 −3
arch/arm/mach-bcmring/csp/chipc/chipcHw.c +1 −1
arch/arm/mach-bcmring/csp/dmac/dmacHw.c +1 −1
arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +1 −1
arch/arm/mach-bcmring/csp/tmr/tmrHw.c +1 −1
arch/arm/mach-bcmring/dma.c +1 −1
arch/arm/mach-bcmring/include/csp/dmacHw.h +1 −1
arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +1 −1
arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +1 −1
arch/arm/mach-gemini/include/mach/hardware.h +1 −1
arch/arm/mach-msm/io.c +1 −1
arch/arm/mach-omap2/cpuidle34xx.c +1 −1
arch/arm/mach-omap2/serial.c +1 −1
arch/arm/mach-pxa/mxm8x10.c +1 −1
arch/arm/mach-s3c64xx/dma.c +1 −1
arch/arm/mach-spear3xx/spear300.c +2 −2
arch/arm/mach-spear3xx/spear310.c +1 −1
arch/arm/mach-spear3xx/spear320.c +1 −1
arch/arm/mach-spear3xx/spear3xx.c +3 −3
arch/arm/mach-spear6xx/spear6xx.c +2 −2
arch/arm/mach-u300/Kconfig +1 −1
arch/arm/mach-u300/include/mach/coh901318.h +2 −2
arch/arm/plat-mxc/include/mach/irqs.h +1 −1
arch/arm/plat-omap/include/plat/omap_hwmod.h +1 −1
arch/blackfin/mach-bf518/include/mach/defBF51x_base.h +1 −1
arch/blackfin/mach-bf527/include/mach/defBF52x_base.h +1 −1
arch/blackfin/mach-bf537/include/mach/defBF534.h +1 −1
arch/blackfin/mach-bf538/include/mach/defBF539.h +1 −1
arch/cris/arch-v32/lib/nand_init.S +1 −1
arch/cris/include/asm/etraxgpio.h +1 −1
arch/h8300/Kconfig.debug +1 −1
arch/ia64/kvm/mmio.c +1 −1
arch/mips/alchemy/common/power.c +1 −1
arch/mips/include/asm/mach-powertv/ioremap.h +1 −1
arch/mips/jz4740/board-qi_lb60.c +2 −2
arch/mips/jz4740/gpio.c +1 −1
arch/mips/mti-malta/malta-memory.c +1 −1
arch/mips/pci/pcie-octeon.c +1 −1
arch/mips/powertv/memory.c +1 −1
arch/mips/txx9/generic/pci.c +1 −1
arch/powerpc/include/asm/8xx_immap.h +2 −2
arch/powerpc/oprofile/op_model_cell.c +1 −1
arch/powerpc/platforms/83xx/suspend-asm.S +3 −3
arch/powerpc/platforms/ps3/device-init.c +2 −2
arch/powerpc/platforms/ps3/interrupt.c +1 −1
arch/sh/mm/cache-sh5.c +1 −1
arch/sparc/kernel/traps_64.c +1 −1
arch/x86/include/asm/pgalloc.h +1 −1
arch/x86/include/asm/processor.h +1 −1
arch/x86/kernel/amd_iommu.c +2 −2
arch/x86/kernel/early_printk_mrst.c +1 −1
arch/x86/kernel/head_32.S +1 −1
block/cfq-iosched.c +1 −1
drivers/acpi/acpica/acobject.h +1 −1
drivers/ata/libata-core.c +2 −2
drivers/ata/sata_vsc.c +1 −1
drivers/atm/idt77252.h +1 −1
drivers/atm/iphase.c +2 −2
drivers/base/power/main.c +1 −1
drivers/dma/intel_mid_dma.c +3 −3
drivers/edac/amd8131_edac.h +1 −1
drivers/edac/cell_edac.c +2 −2
drivers/edac/edac_core.h +1 −1
drivers/edac/ppc4xx_edac.c +3 −3
drivers/gpu/drm/radeon/atombios.h +1 −1
drivers/i2c/busses/i2c-nomadik.c +2 −2
drivers/infiniband/hw/cxgb3/cxio_wr.h +1 −1
drivers/infiniband/hw/qib/qib_iba7322.c +1 −1
drivers/input/touchscreen/Kconfig +1 −1
drivers/isdn/gigaset/bas-gigaset.c +2 −2
drivers/isdn/gigaset/ser-gigaset.c +2 −2
drivers/isdn/gigaset/usb-gigaset.c +2 −2
drivers/isdn/hardware/mISDN/ipac.h +2 −2
drivers/isdn/hardware/mISDN/isar.h +1 −1
drivers/isdn/hisax/isar.c +2 −2
drivers/media/video/cx25840/cx25840-ir.c +1 −1
drivers/media/video/davinci/vpif.h +1 −1
drivers/media/video/davinci/vpss.c +1 −1
drivers/media/video/omap/omap_vout.c +1 −1
drivers/media/video/saa7164/saa7164-core.c +2 −2
drivers/media/video/sn9c102/sn9c102_sensor.h +1 −1
drivers/media/video/zoran/zoran.h +1 −1
drivers/message/fusion/lsi/mpi_log_sas.h +1 −1
drivers/message/fusion/mptbase.c +1 −1
drivers/message/fusion/mptsas.c +1 −1
drivers/message/i2o/i2o_block.c +1 −1
drivers/misc/arm-charlcd.c +1 −1
drivers/mmc/card/block.c +1 −1
drivers/mmc/host/Kconfig +1 −1
drivers/mmc/host/au1xmmc.c +1 −1
drivers/mmc/host/sdricoh_cs.c +2 −2
drivers/mtd/nand/nand_base.c +1 −1
drivers/net/bnx2x/bnx2x_main.c +1 −1
drivers/net/bnx2x/bnx2x_reg.h +1 −1
drivers/net/bonding/bond_3ad.c +3 −3
drivers/net/chelsio/subr.c +1 −1
drivers/net/cxgb3/mc5.c +1 −1
drivers/net/cxgb3/t3_hw.c +1 −1
drivers/net/e1000/e1000_hw.h +1 −1
drivers/net/e1000/e1000_main.c +1 −1
drivers/net/e1000e/82571.c +1 −1
drivers/net/e1000e/ich8lan.c +1 −1
drivers/net/e1000e/phy.c +1 −1
drivers/net/eepro.c +1 −1
drivers/net/irda/donauboe.h +1 −1
drivers/net/ixgbe/ixgbe_82599.c +2 −2
drivers/net/ll_temac_main.c +1 −1
drivers/net/sis900.c +1 −1
drivers/net/tehuti.c +3 −3
drivers/net/tun.c +1 −1
drivers/net/vxge/vxge-traffic.h +1 −1
drivers/net/wan/dscc4.c +1 −1
drivers/net/wimax/i2400m/driver.c +1 −1
drivers/net/wimax/i2400m/i2400m.h +1 −1
drivers/net/wireless/ath/ath5k/reg.h +3 −3
drivers/net/wireless/b43/phy_g.c +1 −1
drivers/net/wireless/b43legacy/phy.c +1 −1
drivers/net/wireless/iwlwifi/iwl-sta.c +1 −1
drivers/net/wireless/prism54/islpci_dev.c +3 −3
drivers/net/wireless/prism54/islpci_eth.c +1 −1
drivers/net/wireless/rt2x00/rt2x00mac.c +1 −1
drivers/net/wireless/wl3501_cs.c +1 −1
drivers/pcmcia/m32r_cfc.h +1 −1
drivers/pcmcia/m32r_pcc.h +1 −1
drivers/pcmcia/m8xx_pcmcia.c +1 −1
drivers/platform/x86/thinkpad_acpi.c +1 −1
drivers/power/s3c_adc_battery.c +2 −2
drivers/s390/net/lcs.c +1 −1
drivers/s390/scsi/zfcp_cfdc.c +1 −1
drivers/scsi/a100u2w.c +1 −1
drivers/scsi/aacraid/commsup.c +1 −1
drivers/scsi/aic7xxx_old/aic7xxx.seq +1 −1
drivers/scsi/aic94xx/aic94xx_reg_def.h +2 −2
drivers/scsi/aic94xx/aic94xx_seq.c +3 −3
drivers/scsi/bfa/bfa_fcpim.c +1 −1
drivers/scsi/bfa/bfa_fcs_lport.c +1 −1
drivers/scsi/dc395x.c +4 −4
drivers/scsi/libfc/fc_fcp.c +1 −1
drivers/scsi/lpfc/lpfc_attr.c +1 −1
drivers/scsi/lpfc/lpfc_hbadisc.c +1 −1
drivers/scsi/lpfc/lpfc_sli.c +1 −1
drivers/scsi/megaraid.h +1 −1
drivers/scsi/pm8001/pm8001_init.c +1 −1
drivers/scsi/scsi_netlink.c +1 −1
drivers/scsi/sym53c8xx_2/sym_glue.c +1 −1
drivers/spi/atmel_spi.c +2 −2
drivers/spi/spidev.c +1 −1
drivers/staging/stradis/stradis.c +1 −1
drivers/usb/gadget/imx_udc.c +1 −1
drivers/usb/host/imx21-hcd.c +1 −1
drivers/usb/host/oxu210hp-hcd.c +1 −1
drivers/usb/misc/adutux.c +1 −1
drivers/usb/misc/iowarrior.c +1 −1
drivers/usb/misc/ldusb.c +1 −1
drivers/usb/musb/musb_gadget.c +2 −2
drivers/usb/wusbcore/wa-rpipe.c +1 −1
drivers/video/sstfb.c +1 −1
fs/ext4/ext4.h +1 −1
fs/ext4/extents.c +2 −2
fs/ext4/inode.c +2 −2
fs/ocfs2/inode.c +1 −1
fs/ocfs2/suballoc.c +1 −1
fs/xfs/linux-2.6/xfs_super.c +1 −1
include/acpi/actbl1.h +1 −1
include/linux/cgroup.h +1 −1
include/linux/firewire-cdev.h +1 −1
include/linux/mfd/core.h +1 −1
include/net/sctp/user.h +2 −2
include/scsi/fc/fc_fcp.h +2 −2
kernel/debug/kdb/kdb_main.c +1 −1
kernel/kexec.c +1 −1
kernel/power/swap.c +1 −1
kernel/sched.c +1 −1
kernel/sysctl_binary.c +1 −1
kernel/time/clocksource.c +1 −1
kernel/trace/trace_entries.h +1 −1
lib/nlattr.c +1 −1
lib/swiotlb.c +1 −1
mm/percpu.c +1 −1
mm/sparse-vmemmap.c +1 −1
net/core/dev.c +1 −1
net/decnet/dn_dev.c +1 −1
net/ipv4/tcp_output.c +1 −1
scripts/kconfig/confdata.c +1 −1
scripts/mod/modpost.c +1 −1
security/apparmor/include/match.h +1 −1
sound/core/init.c +1 −1
sound/core/pcm_native.c +1 −1
sound/isa/opl3sa2.c +1 −1
sound/pci/ca0106/ca0106.h +1 −1
sound/pci/emu10k1/emu10k1x.c +1 −1
sound/pci/emu10k1/p16v.h +1 −1
sound/pci/es1968.c +1 −1
sound/pci/rme9652/hdspm.c +3 −3
sound/soc/codecs/max98088.c +1 −1
sound/soc/s3c24xx/smdk_spdif.c +3 −3

Documentation/DocBook/mtdnand.tmpl+1−1

@@ -250,7 +250,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd) · 249 unmodified lines
250	250	<title>Device ready function</title>
251	251	<para>
252	252	If the hardware interface has the ready busy pin of the NAND chip connected to a
253		− GPIO or other accesible I/O pin, this function is used to read back the state of the
	253	+ GPIO or other accessible I/O pin, this function is used to read back the state of the
254	254	pin. The function has no arguments and should return 0, if the device is busy (R/B pin
255	255	is low) and 1, if the device is ready (R/B pin is high).
256	256	If the hardware interface does not give access to the ready busy pin, then

Documentation/cgroups/cgroup_event_listener.c+1−1

@@ -91,7 +91,7 @@ int main(int argc, char **argv) · 90 unmodified lines
91	91
92	92	if (ret == -1) {
93	93	perror("cgroup.event_control "
94		− "is not accessable any more");
	94	+ "is not accessible any more");
95	95	break;
96	96	}
97	97

Documentation/cgroups/memcg_test.txt+1−1

@@ -398,7 +398,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. · 397 unmodified lines
398	398	written to move_charge_at_immigrate.
399	399
400	400	9.10 Memory thresholds
401		− Memory controler implements memory thresholds using cgroups notification
	401	+ Memory controller implements memory thresholds using cgroups notification
402	402	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
403	403	it.
404	404

Documentation/kprobes.txt+1−1

@@ -598,7 +598,7 @@ a 5-byte jump instruction. So there are several limitations. · 597 unmodified lines
598	598	a) The instructions in DCR must be relocatable.
599	599	b) The instructions in DCR must not include a call instruction.
600	600	c) JTPR must not be targeted by any jump or call instruction.
601		−d) DCR must not straddle the border betweeen functions.
	601	+d) DCR must not straddle the border between functions.
602	602
603	603	Anyway, these limitations are checked by the in-kernel instruction
604	604	decoder, so you don't need to worry about that.

Documentation/kvm/api.txt+1−1

@@ -874,7 +874,7 @@ Possible values are: · 873 unmodified lines
874	874	- KVM_MP_STATE_HALTED: the vcpu has executed a HLT instruction and
875	875	is waiting for an interrupt
876	876	- KVM_MP_STATE_SIPI_RECEIVED: the vcpu has just received a SIPI (vector
877		− accesible via KVM_GET_VCPU_EVENTS)
	877	+ accessible via KVM_GET_VCPU_EVENTS)
878	878
879	879	This ioctl is only useful after KVM_CREATE_IRQCHIP. Without an in-kernel
880	880	irqchip, the multiprocessing state must be maintained by userspace.

Documentation/networking/caif/spi_porting.txt+1−1

@@ -32,7 +32,7 @@ the physical hardware, both with regard to SPI and to GPIOs. · 31 unmodified lines
32	32	This function is called by the CAIF SPI interface to give
33	33	you a chance to set up your hardware to be ready to receive
34	34	a stream of data from the master. The xfer structure contains
35		− both physical and logical adresses, as well as the total length
	35	+ both physical and logical addresses, as well as the total length
36	36	of the transfer in both directions.The dev parameter can be used
37	37	to map to different CAIF SPI slave devices.
38	38

Documentation/powerpc/booting-without-of.txt+1−1

@@ -1098,7 +1098,7 @@ supported currently at the toplevel. · 1097 unmodified lines
1098	1098	* an arbitrary array of bytes
1099	1099	*/
1100	1100
1101		− childnode@addresss { /* define a child node named "childnode"
	1101	+ childnode@address { /* define a child node named "childnode"
1102	1102	* whose unit name is "childnode at
1103	1103	* address"
1104	1104	*/

Documentation/scsi/ChangeLog.lpfc+1−1

@@ -573,7 +573,7 @@ Changes from 20041018 to 20041123 · 572 unmodified lines
573	573	* Backround nodev_timeout processing to DPC This enables us to
574	574	unblock (stop dev_loss_tmo) when appopriate.
575	575	* Fix array discovery with multiple luns. The max_luns was 0 at
576		− the time the host structure was intialized. lpfc_cfg_params
	576	+ the time the host structure was initialized. lpfc_cfg_params
577	577	then set the max_luns to the correct value afterwards.
578	578	* Remove unused define LPFC_MAX_LUN and set the default value of
579	579	lpfc_max_lun parameter to 512.

Documentation/timers/timer_stats.txt+1−1

@@ -19,7 +19,7 @@ Linux system over a sample period: · 18 unmodified lines
19	19
20	20	- the pid of the task(process) which initialized the timer
21	21	- the name of the process which initialized the timer
22		−- the function where the timer was intialized
	22	+- the function where the timer was initialized
23	23	- the callback function which is associated to the timer
24	24	- the number of events (callbacks)
25	25

arch/arm/common/it8152.c+1−1

@@ -236,7 +236,7 @@ static struct resource it8152_mem = { · 235 unmodified lines
236	236
237	237	/*
238	238	* The following functions are needed for DMA bouncing.
239		− * ITE8152 chip can addrees up to 64MByte, so all the devices
	239	+ * ITE8152 chip can address up to 64MByte, so all the devices
240	240	* connected to ITE8152 (PCI and USB) should have limited DMA window
241	241	*/
242	242

arch/arm/common/vic.c+1−1

@@ -70,7 +70,7 @@ static inline struct vic_device to_vic(struct sys_device sys) · 69 unmodified lines
70	70	* vic_init2 - common initialisation code
71	71	* @base: Base of the VIC.
72	72	*
73		− * Common initialisation code for registeration
	73	+ * Common initialisation code for registration
74	74	* and resume.
75	75	*/
76	76	static void vic_init2(void __iomem *base)

arch/arm/mach-at91/board-ecbat91.c+3−3

@@ -128,17 +128,17 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { · 127 unmodified lines
128	128	.platform_data = &my_flash0_platform,
129	129	#endif
130	130	},
131		− { /* User accessable spi - cs1 (250KHz) */
	131	+ { /* User accessible spi - cs1 (250KHz) */
132	132	.modalias = "spi-cs1",
133	133	.chip_select = 1,
134	134	.max_speed_hz = 250 * 1000,
135	135	},
136		− { /* User accessable spi - cs2 (1MHz) */
	136	+ { /* User accessible spi - cs2 (1MHz) */
137	137	.modalias = "spi-cs2",
138	138	.chip_select = 2,
139	139	.max_speed_hz = 1 * 1000 * 1000,
140	140	},
141		− { /* User accessable spi - cs3 (10MHz) */
	141	+ { /* User accessible spi - cs3 (10MHz) */
142	142	.modalias = "spi-cs3",
143	143	.chip_select = 3,
144	144	.max_speed_hz = 10 * 1000 * 1000,

arch/arm/mach-bcmring/csp/chipc/chipcHw.c+1−1

@@ -757,7 +757,7 @@ static int chipcHw_divide(int num, int denom) · 756 unmodified lines
757	757	t = t << 1;
758	758	}
759	759
760		− /* Intialize the result */
	760	+ /* Initialize the result */
761	761	r = 0;
762	762
763	763	do {

arch/arm/mach-bcmring/csp/dmac/dmacHw.c+1−1

@@ -893,7 +893,7 @@ int dmacHw_setDataDescriptor(dmacHw_CONFIG_t pConfig, / [ IN ] Configuration · 892 unmodified lines
893	893	*/
894	894	/****************************************************************************/
895	895	uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
896		− dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
	896	+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
897	897	) {
898	898	dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle);
899	899

arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c+1−1

@@ -316,7 +316,7 @@ static void DisplayDescRing(void pDescriptor, / [ IN ] Descriptor buffer */ · 315 unmodified lines
316	316	/**
317	317	* @brief Check if DMA channel is the flow controller
318	318	*
319		−* @return 1 : If DMA is a flow controler
	319	+* @return 1 : If DMA is a flow controller
320	320	* 0 : Peripheral is the flow controller
321	321	*
322	322	* @note

arch/arm/mach-bcmring/csp/tmr/tmrHw.c+1−1

@@ -558,7 +558,7 @@ static int tmrHw_divide(int num, int denom) · 557 unmodified lines
558	558	t = t << 1;
559	559	}
560	560
561		− /* Intialize the result */
	561	+ /* Initialize the result */
562	562	r = 0;
563	563
564	564	do {

arch/arm/mach-bcmring/dma.c+1−1

@@ -671,7 +671,7 @@ static int ConfigChannel(DMA_Handle_t handle) · 670 unmodified lines
671	671
672	672	/****************************************************************************/
673	673	/**
674		−* Intializes all of the data structures associated with the DMA.
	674	+* Initializes all of the data structures associated with the DMA.
675	675	* @return
676	676	* >= 0 - Initialization was successfull.
677	677	*

arch/arm/mach-bcmring/include/csp/dmacHw.h+1−1

@@ -590,7 +590,7 @@ void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle · 589 unmodified lines
590	590	*/
591	591	/****************************************************************************/
592	592	uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */
593		− dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controler attribute of type dmacHw_CONTROLLER_ATTRIB_e */
	593	+ dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */
594	594	);
595	595
596	596	#endif /* _DMACHW_H */

arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h+1−1

@@ -28,7 +28,7 @@ · 27 unmodified lines
28	28
29	29	/* Data type for DMA Link List Item */
30	30	typedef struct {
31		− uint32_t sar; /* Source Adress Register.
	31	+ uint32_t sar; /* Source Address Register.
32	32	Address must be aligned to CTLx.SRC_TR_WIDTH. */
33	33	uint32_t dar; /* Destination Address Register.
34	34	Address must be aligned to CTLx.DST_TR_WIDTH. */

arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h+1−1

@@ -35,7 +35,7 @@ typedef struct { · 34 unmodified lines
35	35
36	36	/* Data type representing DMA channel registers */
37	37	typedef struct {
38		− dmacHw_REG64_t ChannelSar; /* Source Adress Register. 64 bits (upper 32 bits are reserved)
	38	+ dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved)
39	39	Address must be aligned to CTLx.SRC_TR_WIDTH.
40	40	*/
41	41	dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved)

arch/arm/mach-gemini/include/mach/hardware.h+1−1

@@ -33,7 +33,7 @@ · 32 unmodified lines
33	33	#define GEMINI_LPC_HOST_BASE 0x47000000
34	34	#define GEMINI_LPC_IO_BASE 0x47800000
35	35	#define GEMINI_INTERRUPT_BASE 0x48000000
36		−/* TODO: Different interrupt controlers when SMP
	36	+/* TODO: Different interrupt controllers when SMP
37	37	* #define GEMINI_INTERRUPT0_BASE 0x48000000
38	38	* #define GEMINI_INTERRUPT1_BASE 0x49000000
39	39	*/

arch/arm/mach-msm/io.c+1−1

@@ -153,7 +153,7 @@ __msm_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype) · 152 unmodified lines
153	153	{
154	154	if (mtype == MT_DEVICE) {
155	155	/* The peripherals in the 88000000 - D0000000 range
156		− * are only accessable by type MT_DEVICE_NONSHARED.
	156	+ * are only accessible by type MT_DEVICE_NONSHARED.
157	157	* Adjust mtype as necessary to make this "just work."
158	158	*/
159	159	if ((phys_addr >= 0x88000000) && (phys_addr < 0xD0000000))

arch/arm/mach-omap2/cpuidle34xx.c+1−1

@@ -252,7 +252,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, · 251 unmodified lines
252	252	* FIXME: we currently manage device-specific idle states
253	253	* for PER and CORE in combination with CPU-specific
254	254	* idle states. This is wrong, and device-specific
255		− * idle managment needs to be separated out into
	255	+ * idle management needs to be separated out into
256	256	* its own code.
257	257	*/
258	258

arch/arm/mach-omap2/serial.c+1−1

@@ -843,7 +843,7 @@ void __init omap_serial_init_port(int port) · 842 unmodified lines
843	843	}
844	844
845	845	/**
846		− * omap_serial_init() - intialize all supported serial ports
	846	+ * omap_serial_init() - initialize all supported serial ports
847	847	*
848	848	* Initializes all available UARTs as serial ports. Platforms
849	849	* can call this function when they want to have default behaviour

arch/arm/mach-pxa/mxm8x10.c+1−1

@@ -337,7 +337,7 @@ void __init mxm_8x10_mmc_init(void) · 336 unmodified lines
337	337	}
338	338	#endif
339	339
340		−/* USB Open Host Controler Interface */
	340	+/* USB Open Host Controller Interface */
341	341	static struct pxaohci_platform_data mxm_8x10_ohci_platform_data = {
342	342	.port_mode = PMM_NPS_MODE,
343	343	.flags = ENABLE_PORT_ALL

arch/arm/mach-s3c64xx/dma.c+1−1

@@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) · 739 unmodified lines
740	740	/* Set all DMA configuration to be DMA, not SDMA */
741	741	writel(0xffffff, S3C_SYSREG(0x110));
742	742
743		− /* Register standard DMA controlers */
	743	+ /* Register standard DMA controllers */
744	744	s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
745	745	s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
746	746

arch/arm/mach-spear3xx/spear300.c+2−2

@@ -371,7 +371,7 @@ struct pmx_driver pmx_driver = { · 370 unmodified lines
371	371	};
372	372
373	373	/* Add spear300 specific devices here */
374		−/* arm gpio1 device registeration */
	374	+/* arm gpio1 device registration */
375	375	static struct pl061_platform_data gpio1_plat_data = {
376	376	.gpio_base = 8,
377	377	.irq_base = SPEAR_GPIO1_INT_BASE,
@@ -451,7 +451,7 @@ void __init spear300_init(void) · 73 unmodified lines
451	451	/* call spear3xx family common init function */
452	452	spear3xx_init();
453	453
454		− /* shared irq registeration */
	454	+ /* shared irq registration */
455	455	shirq_ras1.regs.base =
456	456	ioremap(SPEAR300_TELECOM_BASE, SPEAR300_TELECOM_REG_SIZE);
457	457	if (shirq_ras1.regs.base) {

arch/arm/mach-spear3xx/spear310.c+1−1

@@ -266,7 +266,7 @@ void __init spear310_init(void) · 265 unmodified lines
266	266	/* call spear3xx family common init function */
267	267	spear3xx_init();
268	268
269		− /* shared irq registeration */
	269	+ /* shared irq registration */
270	270	base = ioremap(SPEAR310_SOC_CONFIG_BASE, SPEAR310_SOC_CONFIG_SIZE);
271	271	if (base) {
272	272	/* shirq 1 */

arch/arm/mach-spear3xx/spear320.c+1−1

@@ -519,7 +519,7 @@ void __init spear320_init(void) · 518 unmodified lines
519	519	/* call spear3xx family common init function */
520	520	spear3xx_init();
521	521
522		− /* shared irq registeration */
	522	+ /* shared irq registration */
523	523	base = ioremap(SPEAR320_SOC_CONFIG_BASE, SPEAR320_SOC_CONFIG_SIZE);
524	524	if (base) {
525	525	/* shirq 1 */

arch/arm/mach-spear3xx/spear3xx.c+3−3

@@ -22,7 +22,7 @@ · 21 unmodified lines
22	22	#include <mach/spear.h>
23	23
24	24	/* Add spear3xx machines common devices here */
25		−/* gpio device registeration */
	25	+/* gpio device registration */
26	26	static struct pl061_platform_data gpio_plat_data = {
27	27	.gpio_base = 0,
28	28	.irq_base = SPEAR_GPIO_INT_BASE,
@@ -41,7 +41,7 @@ struct amba_device gpio_device = { · 12 unmodified lines
41	41	.irq = {IRQ_BASIC_GPIO, NO_IRQ},
42	42	};
43	43
44		−/* uart device registeration */
	44	+/* uart device registration */
45	45	struct amba_device uart_device = {
46	46	.dev = {
47	47	.init_name = "uart",
@@ -543,6 +543,6 @@ void spear_pmx_init(struct pmx_driver *pmx_driver, uint base, uint size) · 495 unmodified lines
543	543
544	544	pmx_fail:
545	545	if (ret)
546		− printk(KERN_ERR "padmux: registeration failed. err no: %d\n",
	546	+ printk(KERN_ERR "padmux: registration failed. err no: %d\n",
547	547	ret);
548	548	}

arch/arm/mach-spear6xx/spear6xx.c+2−2

@@ -23,7 +23,7 @@ · 22 unmodified lines
23	23	#include <mach/spear.h>
24	24
25	25	/* Add spear6xx machines common devices here */
26		−/* uart device registeration */
	26	+/* uart device registration */
27	27	struct amba_device uart_device[] = {
28	28	{
29	29	.dev = {
@@ -50,7 +50,7 @@ struct amba_device uart_device[] = { · 20 unmodified lines
50	50	}
51	51	};
52	52
53		−/* gpio device registeration */
	53	+/* gpio device registration */
54	54	static struct pl061_platform_data gpio_plat_data[] = {
55	55	{
56	56	.gpio_base = 0,

arch/arm/mach-u300/Kconfig+1−1

@@ -64,7 +64,7 @@ config MACH_U300_DUAL_RAM · 63 unmodified lines
64	64	bool "Dual RAM"
65	65	help
66	66	Select this if you want support for Dual RAM phones.
67		− This is two RAM memorys on different EMIFs.
	67	+ This is two RAM memories on different EMIFs.
68	68	endchoice
69	69
70	70	config U300_DEBUG

arch/arm/mach-u300/include/mach/coh901318.h+2−2

@@ -24,7 +24,7 @@ · 23 unmodified lines
24	24	* @src_addr: transfer source address
25	25	* @dst_addr: transfer destination address
26	26	* @link_addr: physical address to next lli
27		− * @virt_link_addr: virtual addres of next lli (only used by pool_free)
	27	+ * @virt_link_addr: virtual address of next lli (only used by pool_free)
28	28	* @phy_this: physical address of current lli (only used by pool_free)
29	29	*/
30	30	struct coh901318_lli {
@@ -90,7 +90,7 @@ struct powersave { · 59 unmodified lines
90	90	* struct coh901318_platform - platform arch structure
91	91	* @chans_slave: specifying dma slave channels
92	92	* @chans_memcpy: specifying dma memcpy channels
93		− * @access_memory_state: requesting DMA memeory access (on / off)
	93	+ * @access_memory_state: requesting DMA memory access (on / off)
94	94	* @chan_conf: dma channel configurations
95	95	* @max_channels: max number of dma chanenls
96	96	*/

arch/arm/plat-mxc/include/mach/irqs.h+1−1

@@ -66,7 +66,7 @@ extern int imx_irq_set_priority(unsigned char irq, unsigned char prio); · 65 unmodified lines
66	66
67	67	/* all normal IRQs can be FIQs */
68	68	#define FIQ_START 0
69		−/* switch betwean IRQ and FIQ */
	69	+/* switch between IRQ and FIQ */
70	70	extern int mxc_set_irq_fiq(unsigned int irq, unsigned int type);
71	71
72	72	#endif /* __ASM_ARCH_MXC_IRQS_H__ */

arch/arm/plat-omap/include/plat/omap_hwmod.h+1−1

@@ -339,7 +339,7 @@ struct omap_hwmod_omap2_prcm { · 338 unmodified lines
339	339	/**
340	340	* struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data
341	341	* @clkctrl_reg: PRCM address of the clock control register
342		− * @rstctrl_reg: adress of the XXX_RSTCTRL register located in the PRM
	342	+ * @rstctrl_reg: address of the XXX_RSTCTRL register located in the PRM
343	343	* @submodule_wkdep_bit: bit shift of the WKDEP range
344	344	*/
345	345	struct omap_hwmod_omap4_prcm {

arch/blackfin/mach-bf518/include/mach/defBF51x_base.h+1−1

@@ -1197,7 +1197,7 @@ · 1196 unmodified lines
1197	1197	#define SADD_LEN 0x0002 /* Slave Address Length */
1198	1198	#define STDVAL 0x0004 /* Slave Transmit Data Valid */
1199	1199	#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1200		−#define GEN 0x0010 /* General Call Adrress Matching Enabled */
	1200	+#define GEN 0x0010 /* General Call Address Matching Enabled */
1201	1201
1202	1202	/* TWI_SLAVE_STAT Masks */
1203	1203	#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive) /

arch/blackfin/mach-bf527/include/mach/defBF52x_base.h+1−1

@@ -1206,7 +1206,7 @@ · 1205 unmodified lines
1206	1206	#define SADD_LEN 0x0002 /* Slave Address Length */
1207	1207	#define STDVAL 0x0004 /* Slave Transmit Data Valid */
1208	1208	#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1209		−#define GEN 0x0010 /* General Call Adrress Matching Enabled */
	1209	+#define GEN 0x0010 /* General Call Address Matching Enabled */
1210	1210
1211	1211	/* TWI_SLAVE_STAT Masks */
1212	1212	#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive) /

arch/blackfin/mach-bf537/include/mach/defBF534.h+1−1

@@ -1523,7 +1523,7 @@ · 1522 unmodified lines
1523	1523	#define SADD_LEN 0x0002 /* Slave Address Length */
1524	1524	#define STDVAL 0x0004 /* Slave Transmit Data Valid */
1525	1525	#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
1526		−#define GEN 0x0010 /* General Call Adrress Matching Enabled */
	1526	+#define GEN 0x0010 /* General Call Address Matching Enabled */
1527	1527
1528	1528	/* TWI_SLAVE_STAT Masks */
1529	1529	#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive) /

arch/blackfin/mach-bf538/include/mach/defBF539.h+1−1

@@ -2185,7 +2185,7 @@ · 2184 unmodified lines
2185	2185	#define SADD_LEN 0x0002 /* Slave Address Length */
2186	2186	#define STDVAL 0x0004 /* Slave Transmit Data Valid */
2187	2187	#define NAK 0x0008 /* NAK/ACK* Generated At Conclusion Of Transfer */
2188		−#define GEN 0x0010 /* General Call Adrress Matching Enabled */
	2188	+#define GEN 0x0010 /* General Call Address Matching Enabled */
2189	2189
2190	2190	/* TWIx_SLAVE_STAT Masks */
2191	2191	#define SDIR 0x0001 /* Slave Transfer Direction (Transmit/Receive) /

arch/cris/arch-v32/lib/nand_init.S+1−1

@@ -139,7 +139,7 @@ copy_nand_to_ram: · 138 unmodified lines
139	139	lsrq 8, $r4
140	140	move.b $r4, [$r1] ; Row address
141	141	lsrq 8, $r4
142		− move.b $r4, [$r1] ; Row adddress
	142	+ move.b $r4, [$r1] ; Row address
143	143	moveq 20, $r4
144	144	2: bne 2b
145	145	subq 1, $r4

arch/cris/include/asm/etraxgpio.h+1−1

@@ -1,5 +1,5 @@
1	1	/*
2		− * The following devices are accessable using this driver using
	2	+ * The following devices are accessible using this driver using
3	3	* GPIO_MAJOR (120) and a couple of minor numbers.
4	4	*
5	5	* For ETRAX 100LX (CONFIG_ETRAX_ARCH_V10):

arch/h8300/Kconfig.debug+1−1

@@ -48,7 +48,7 @@ config DEFAULT_CMDLINE · 47 unmodified lines
48	48	builtin kernel commandline enabled.
49	49
50	50	config KERNEL_COMMAND
51		− string "Buildin commmand string"
	51	+ string "Buildin command string"
52	52	depends on DEFAULT_CMDLINE
53	53	help
54	54	builtin kernel commandline strings.

arch/ia64/kvm/mmio.c+1−1

@@ -130,7 +130,7 @@ static void mmio_access(struct kvm_vcpu vcpu, u64 src_pa, u64 dest, · 129 unmodified lines
130	130
131	131	local_irq_save(psr);
132	132
133		− /Intercept the acces for PIB range/
	133	+ /Intercept the access for PIB range/
134	134	if (iot == GPFN_PIB) {
135	135	if (!dir)
136	136	lsapic_write(vcpu, src_pa, s, *dest);

arch/mips/alchemy/common/power.c+1−1

@@ -130,7 +130,7 @@ static void restore_core_regs(void) · 129 unmodified lines
130	130	au_writel(sleep_usb[1], USBD_ENABLE);
131	131	au_sync();
132	132	#else
133		− /* enable accces to OTG memory */
	133	+ /* enable access to OTG memory */
134	134	au_writel(au_readl(USB_MSR_BASE + 4) \| (1 << 6), USB_MSR_BASE + 4);
135	135	au_sync();
136	136

arch/mips/include/asm/mach-powertv/ioremap.h+1−1

@@ -88,7 +88,7 @@ static inline dma_addr_t _dma_to_phys_offset_raw(dma_addr_t dma) · 87 unmodified lines
88	88	}
89	89
90	90	/* These are not portable and should not be used in drivers. Drivers should
91		− * be using ioremap() and friends to map physical addreses to virtual
	91	+ * be using ioremap() and friends to map physical addresses to virtual
92	92	* addresses and dma_map*() and friends to map virtual addresses into DMA
93	93	* addresses and back.
94	94	*/

arch/mips/jz4740/board-qi_lb60.c+2−2

@@ -65,7 +65,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_1gb = { · 64 unmodified lines
65	65
66	66	/* Early prototypes of the QI LB60 had only 1GB of NAND.
67	67	* In order to support these devices aswell the partition and ecc layout is
68		− * initalized depending on the NAND size */
	68	+ * initialized depending on the NAND size */
69	69	static struct mtd_partition qi_lb60_partitions_1gb[] = {
70	70	{
71	71	.name = "NAND BOOT partition",
@@ -464,7 +464,7 @@ static int __init qi_lb60_board_setup(void) · 392 unmodified lines
464	464	board_gpio_setup();
465	465
466	466	if (qi_lb60_init_platform_devices())
467		− panic("Failed to initalize platform devices\n");
	467	+ panic("Failed to initialize platform devices\n");
468	468
469	469	return 0;
470	470	}

arch/mips/jz4740/gpio.c+1−1

@@ -546,7 +546,7 @@ static int __init jz4740_gpio_init(void) · 545 unmodified lines
546	546	for (i = 0; i < ARRAY_SIZE(jz4740_gpio_chips); ++i)
547	547	jz4740_gpio_chip_init(&jz4740_gpio_chips[i], i);
548	548
549		− printk(KERN_INFO "JZ4740 GPIO initalized\n");
	549	+ printk(KERN_INFO "JZ4740 GPIO initialized\n");
550	550
551	551	return 0;
552	552	}

arch/mips/mti-malta/malta-memory.c+1−1

@@ -43,7 +43,7 @@ static struct prom_pmemblock mdesc[PROM_MAX_PMEMBLOCKS]; · 42 unmodified lines
43	43	static char *mtypes[3] = {
44	44	"Dont use memory",
45	45	"YAMON PROM memory",
46		− "Free memmory",
	46	+ "Free memory",
47	47	};
48	48	#endif
49	49

arch/mips/pci/pcie-octeon.c+1−1

@@ -900,7 +900,7 @@ static int cvmx_pcie_rc_initialize(int pcie_port) · 899 unmodified lines
900	900	mem_access_subid.s.ror = 0;
901	901	/* Disable Relaxed Ordering for Writes. */
902	902	mem_access_subid.s.row = 0;
903		− /* PCIe Adddress Bits <63:34>. */
	903	+ /* PCIe Address Bits <63:34>. */
904	904	mem_access_subid.s.ba = 0;
905	905
906	906	/*

arch/mips/powertv/memory.c+1−1

@@ -57,7 +57,7 @@ · 56 unmodified lines
57	57	unsigned long ptv_memsize;
58	58
59	59	/*
60		− * struct low_mem_reserved - Items in low memmory that are reserved
	60	+ * struct low_mem_reserved - Items in low memory that are reserved
61	61	* @start: Physical address of item
62	62	* @size: Size, in bytes, of this item
63	63	* @is_aliased: True if this is RAM aliased from another location. If false,

arch/mips/txx9/generic/pci.c+1−1

@@ -107,7 +107,7 @@ int txx9_pci_mem_high __initdata; · 106 unmodified lines
107	107
108	108	/*
109	109	* allocate pci_controller and resources.
110		− * mem_base, io_base: physical addresss. 0 for auto assignment.
	110	+ * mem_base, io_base: physical address. 0 for auto assignment.
111	111	* mem_size and io_size means max size on auto assignment.
112	112	* pcic must be &txx9_primary_pcic or NULL.
113	113	*/

arch/powerpc/include/asm/8xx_immap.h+2−2

@@ -93,7 +93,7 @@ typedef struct mem_ctlr { · 92 unmodified lines
93	93	} memctl8xx_t;
94	94
95	95	/*-----------------------------------------------------------------------
96		− * BR - Memory Controler: Base Register 16-9
	96	+ * BR - Memory Controller: Base Register 16-9
97	97	*/
98	98	#define BR_BA_MSK 0xffff8000 /* Base Address Mask */
99	99	#define BR_AT_MSK 0x00007000 /* Address Type Mask */
@@ -110,7 +110,7 @@ typedef struct mem_ctlr { · 10 unmodified lines
110	110	#define BR_V 0x00000001 /* Bank Valid */
111	111
112	112	/*-----------------------------------------------------------------------
113		− * OR - Memory Controler: Option Register 16-11
	113	+ * OR - Memory Controller: Option Register 16-11
114	114	*/
115	115	#define OR_AM_MSK 0xffff8000 /* Address Mask Mask */
116	116	#define OR_ATM_MSK 0x00007000 /* Address Type Mask Mask */

arch/powerpc/oprofile/op_model_cell.c+1−1

@@ -1469,7 +1469,7 @@ static int cell_global_start(struct op_counter_config *ctr) · 1468 unmodified lines
1469	1469	* The pm_interval register is setup to write the SPU PC value into the
1470	1470	* trace buffer at the maximum rate possible. The trace buffer is configured
1471	1471	* to store the PCs, wrapping when it is full. The performance counter is
1472		− * intialized to the max hardware count minus the number of events, N, between
	1472	+ * initialized to the max hardware count minus the number of events, N, between
1473	1473	* samples. Once the N events have occured, a HW counter overflow occurs
1474	1474	* causing the generation of a HW counter interrupt which also stops the
1475	1475	* writing of the SPU PC values to the trace buffer. Hence the last PC

arch/powerpc/platforms/83xx/suspend-asm.S+3−3

@@ -231,7 +231,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) · 230 unmodified lines
231	231	ori r4, r4, 0x002a
232	232	mtspr SPRN_DBAT0L, r4
233	233	lis r8, TMP_VIRT_IMMR@h
234		− ori r4, r8, 0x001e /* 1 MByte accessable from Kernel Space only */
	234	+ ori r4, r8, 0x001e /* 1 MByte accessible from Kernel Space only */
235	235	mtspr SPRN_DBAT0U, r4
236	236	isync
237	237
@@ -241,7 +241,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) · 3 unmodified lines
241	241	ori r4, r4, 0x002a
242	242	mtspr SPRN_DBAT1L, r4
243	243	lis r9, (TMP_VIRT_IMMR + 0x01000000)@h
244		− ori r4, r9, 0x001e /* 1 MByte accessable from Kernel Space only */
	244	+ ori r4, r9, 0x001e /* 1 MByte accessible from Kernel Space only */
245	245	mtspr SPRN_DBAT1U, r4
246	246	isync
247	247
@@ -253,7 +253,7 @@ _GLOBAL(mpc83xx_enter_deep_sleep) · 5 unmodified lines
253	253	li r4, 0x0002
254	254	mtspr SPRN_DBAT2L, r4
255	255	lis r4, KERNELBASE@h
256		− ori r4, r4, 0x001e /* 1 MByte accessable from Kernel Space only */
	256	+ ori r4, r4, 0x001e /* 1 MByte accessible from Kernel Space only */
257	257	mtspr SPRN_DBAT2U, r4
258	258	isync
259	259

arch/powerpc/platforms/ps3/device-init.c+2−2

@@ -566,10 +566,10 @@ static int ps3_setup_dynamic_device(const struct ps3_repository_device *repo) · 565 unmodified lines
566	566	case PS3_DEV_TYPE_STOR_DISK:
567	567	result = ps3_setup_storage_dev(repo, PS3_MATCH_ID_STOR_DISK);
568	568
569		− /* Some devices are not accessable from the Other OS lpar. */
	569	+ /* Some devices are not accessible from the Other OS lpar. */
570	570	if (result == -ENODEV) {
571	571	result = 0;
572		− pr_debug("%s:%u: not accessable\n", __func__,
	572	+ pr_debug("%s:%u: not accessible\n", __func__,
573	573	__LINE__);
574	574	}
575	575

arch/powerpc/platforms/ps3/interrupt.c+1−1

@@ -44,7 +44,7 @@ · 43 unmodified lines
44	44	* @lock:
45	45	* @ipi_debug_brk_mask:
46	46	*
47		− * The HV mantains per SMT thread mappings of HV outlet to HV plug on
	47	+ * The HV maintains per SMT thread mappings of HV outlet to HV plug on
48	48	* behalf of the guest. These mappings are implemented as 256 bit guest
49	49	* supplied bitmaps indexed by plug number. The addresses of the bitmaps
50	50	* are registered with the HV through lv1_configure_irq_state_bitmap().

arch/sh/mm/cache-sh5.c+1−1

@@ -568,7 +568,7 @@ static void sh5_flush_dcache_page(void *page) · 567 unmodified lines
568	568	}
569	569
570	570	/*
571		− * Flush the range [start,end] of kernel virtual adddress space from
	571	+ * Flush the range [start,end] of kernel virtual address space from
572	572	* the I-cache. The corresponding range must be purged from the
573	573	* D-cache also because the SH-5 doesn't have cache snooping between
574	574	* the caches. The addresses will be visible through the superpage

arch/sparc/kernel/traps_64.c+1−1

@@ -622,7 +622,7 @@ static const char CHAFSR_PERR_msg[] = · 621 unmodified lines
622	622	static const char CHAFSR_IERR_msg[] =
623	623	"Internal processor error";
624	624	static const char CHAFSR_ISAP_msg[] =
625		− "System request parity error on incoming addresss";
	625	+ "System request parity error on incoming address";
626	626	static const char CHAFSR_UCU_msg[] =
627	627	"Uncorrectable E-cache ECC error for ifetch/data";
628	628	static const char CHAFSR_UCC_msg[] =

arch/x86/include/asm/pgalloc.h+1−1

@@ -92,7 +92,7 @@ static inline void pmd_free(struct mm_struct mm, pmd_t pmd) · 91 unmodified lines
92	92	extern void ___pmd_free_tlb(struct mmu_gather tlb, pmd_t pmd);
93	93
94	94	static inline void __pmd_free_tlb(struct mmu_gather tlb, pmd_t pmd,
95		− unsigned long adddress)
	95	+ unsigned long address)
96	96	{
97	97	___pmd_free_tlb(tlb, pmd);
98	98	}

arch/x86/include/asm/processor.h+1−1

@@ -902,7 +902,7 @@ extern unsigned long thread_saved_pc(struct task_struct *tsk); · 901 unmodified lines
902	902	/*
903	903	* The below -8 is to reserve 8 bytes on top of the ring0 stack.
904	904	* This is necessary to guarantee that the entire "struct pt_regs"
905		− * is accessable even if the CPU haven't stored the SS/ESP registers
	905	+ * is accessible even if the CPU haven't stored the SS/ESP registers
906	906	* on the stack (interrupt gate does not save these registers
907	907	* when switching to the same priv ring).
908	908	* Therefore beware: accessing the ss/esp fields of the

arch/x86/kernel/amd_iommu.c+2−2

@@ -1086,7 +1086,7 @@ static int alloc_new_range(struct dma_ops_domain *dma_dom, · 1085 unmodified lines
1086	1086
1087	1087	dma_dom->aperture_size += APERTURE_RANGE_SIZE;
1088	1088
1089		− /* Intialize the exclusion range if necessary */
	1089	+ /* Initialize the exclusion range if necessary */
1090	1090	for_each_iommu(iommu) {
1091	1091	if (iommu->exclusion_start &&
1092	1092	iommu->exclusion_start >= dma_dom->aperture[index]->offset
@@ -1353,7 +1353,7 @@ static void dma_ops_domain_free(struct dma_ops_domain *dom) · 260 unmodified lines
1353	1353
1354	1354	/*
1355	1355	* Allocates a new protection domain usable for the dma_ops functions.
1356		− * It also intializes the page table and the address allocator data
	1356	+ * It also initializes the page table and the address allocator data
1357	1357	* structures required for the dma_ops interface
1358	1358	*/
1359	1359	static struct dma_ops_domain *dma_ops_domain_alloc(void)

arch/x86/kernel/early_printk_mrst.c+1−1

@@ -103,7 +103,7 @@ struct dw_spi_reg { · 102 unmodified lines
103	103	static unsigned long mrst_spi_paddr = MRST_REGBASE_SPI0;
104	104
105	105	static u32 *pclk_spi0;
106		−/* Always contains an accessable address, start with 0 */
	106	+/* Always contains an accessible address, start with 0 */
107	107	static struct dw_spi_reg *pspi;
108	108
109	109	static struct kmsg_dumper dw_dumper;

arch/x86/kernel/head_32.S+1−1

@@ -124,7 +124,7 @@ ENTRY(startup_32) · 123 unmodified lines
124	124	movsl
125	125	movl pa(boot_params) + NEW_CL_POINTER,%esi
126	126	andl %esi,%esi
127		− jz 1f # No comand line
	127	+ jz 1f # No command line
128	128	movl $pa(boot_command_line),%edi
129	129	movl $(COMMAND_LINE_SIZE/4),%ecx
130	130	rep

block/cfq-iosched.c+1−1

@@ -1030,7 +1030,7 @@ cfq_find_alloc_cfqg(struct cfq_data cfqd, struct cgroup cgroup, int create) · 1029 unmodified lines
1030	1030
1031	1031	/*
1032	1032	* Add group onto cgroup list. It might happen that bdi->dev is
1033		− * not initiliazed yet. Initialize this new group without major
	1033	+ * not initialized yet. Initialize this new group without major
1034	1034	* and minor info and this info will be filled in once a new thread
1035	1035	* comes for IO. See code above.
1036	1036	*/

drivers/acpi/acpica/acobject.h+1−1

@@ -93,7 +93,7 @@ · 92 unmodified lines
93	93
94	94	#define AOPOBJ_AML_CONSTANT 0x01 /* Integer is an AML constant */
95	95	#define AOPOBJ_STATIC_POINTER 0x02 /* Data is part of an ACPI table, don't delete */
96		−#define AOPOBJ_DATA_VALID 0x04 /* Object is intialized and data is valid */
	96	+#define AOPOBJ_DATA_VALID 0x04 /* Object is initialized and data is valid */
97	97	#define AOPOBJ_OBJECT_INITIALIZED 0x08 /* Region is initialized, _REG was run */
98	98	#define AOPOBJ_SETUP_COMPLETE 0x10 /* Region setup is complete */
99	99	#define AOPOBJ_INVALID 0x20 /* Host OS won't allow a Region address */

drivers/ata/libata-core.c+2−2

@@ -2240,7 +2240,7 @@ int ata_dev_configure(struct ata_device *dev) · 2239 unmodified lines
2240	2240	if (id[ATA_ID_CFA_KEY_MGMT] & 1)
2241	2241	ata_dev_printk(dev, KERN_WARNING,
2242	2242	"supports DRM functions and may "
2243		− "not be fully accessable.\n");
	2243	+ "not be fully accessible.\n");
2244	2244	snprintf(revbuf, 7, "CFA");
2245	2245	} else {
2246	2246	snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
@@ -2248,7 +2248,7 @@ int ata_dev_configure(struct ata_device *dev) · 1 unmodified line
2248	2248	if (ata_id_has_tpm(id))
2249	2249	ata_dev_printk(dev, KERN_WARNING,
2250	2250	"supports DRM functions and may "
2251		− "not be fully accessable.\n");
	2251	+ "not be fully accessible.\n");
2252	2252	}
2253	2253
2254	2254	dev->n_sectors = ata_id_n_sectors(id);

drivers/ata/sata_vsc.c+1−1

@@ -370,7 +370,7 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev, · 369 unmodified lines
370	370	if (pci_resource_len(pdev, 0) == 0)
371	371	return -ENODEV;
372	372
373		− /* map IO regions and intialize host accordingly */
	373	+ /* map IO regions and initialize host accordingly */
374	374	rc = pcim_iomap_regions(pdev, 1 << VSC_MMIO_BAR, DRV_NAME);
375	375	if (rc == -EBUSY)
376	376	pcim_pin_device(pdev);

drivers/atm/idt77252.h+1−1

@@ -572,7 +572,7 @@ struct idt77252_dev · 571 unmodified lines
572	572	#define SAR_STAT_TSQF 0x00001000 /* Transmit Status Queue full */
573	573	#define SAR_STAT_TMROF 0x00000800 /* Timer overflow */
574	574	#define SAR_STAT_PHYI 0x00000400 /* PHY device Interrupt flag */
575		−#define SAR_STAT_CMDBZ 0x00000200 /* ABR SAR Comand Busy Flag */
	575	+#define SAR_STAT_CMDBZ 0x00000200 /* ABR SAR Command Busy Flag */
576	576	#define SAR_STAT_FBQ3A 0x00000100 /* Free Buffer Queue 3 Attention */
577	577	#define SAR_STAT_FBQ2A 0x00000080 /* Free Buffer Queue 2 Attention */
578	578	#define SAR_STAT_RSQF 0x00000040 /* Receive Status Queue full */

drivers/atm/iphase.c+2−2

@@ -2063,7 +2063,7 @@ static int tx_init(struct atm_dev *dev) · 2062 unmodified lines
2063	2063	- UBR Table size is 4K
2064	2064	- UBR wait queue is 4K
2065	2065	since the table and wait queues are contiguous, all the bytes
2066		− can be initialized by one memeset.
	2066	+ can be initialized by one memeset.
2067	2067	*/
2068	2068
2069	2069	vcsize_sel = 0;
@@ -2089,7 +2089,7 @@ static int tx_init(struct atm_dev *dev) · 19 unmodified lines
2089	2089	- ABR Table size is 2K
2090	2090	- ABR wait queue is 2K
2091	2091	since the table and wait queues are contiguous, all the bytes
2092		− can be intialized by one memeset.
	2092	+ can be initialized by one memeset.
2093	2093	*/
2094	2094	i = ABR_SCHED_TABLE * iadev->memSize;
2095	2095	writew((i >> 11) & 0xffff, iadev->seg_reg+ABR_SBPTR_BASE);

drivers/base/power/main.c+1−1

@@ -8,7 +8,7 @@ · 7 unmodified lines
8	8	*
9	9	*
10	10	* The driver model core calls device_pm_add() when a device is registered.
11		− * This will intialize the embedded device_pm_info object in the device
	11	+ * This will initialize the embedded device_pm_info object in the device
12	12	* and add it to the list of power-controlled devices. sysfs entries for
13	13	* controlling device power management will also be added.
14	14	*

drivers/dma/intel_mid_dma.c+3−3

@@ -1060,8 +1060,8 @@ static irqreturn_t intel_mid_dma_interrupt2(int irq, void *data) · 1059 unmodified lines
1060	1060	* mid_setup_dma - Setup the DMA controller
1061	1061	* @pdev: Controller PCI device structure
1062	1062	*
1063		− * Initilize the DMA controller, channels, registers with DMA engine,
1064		− * ISR. Initilize DMA controller channels.
	1063	+ * Initialize the DMA controller, channels, registers with DMA engine,
	1064	+ * ISR. Initialize DMA controller channels.
1065	1065	*/
1066	1066	static int mid_setup_dma(struct pci_dev *pdev)
1067	1067	{
@@ -1219,7 +1219,7 @@ static void middma_shutdown(struct pci_dev *pdev) · 151 unmodified lines
1219	1219	* @pdev: Controller PCI device structure
1220	1220	* @id: pci device id structure
1221	1221	*
1222		− * Initilize the PCI device, map BARs, query driver data.
	1222	+ * Initialize the PCI device, map BARs, query driver data.
1223	1223	* Call setup_dma to complete contoller and chan initilzation
1224	1224	*/
1225	1225	static int __devinit intel_mid_dma_probe(struct pci_dev *pdev,

drivers/edac/amd8131_edac.h+1−1

@@ -99,7 +99,7 @@ struct amd8131_dev_info { · 98 unmodified lines
99	99
100	100	/*
101	101	* AMD8131 chipset has two pairs of PCIX Bridge and related IOAPIC
102		− * Controler, and ATCA-6101 has two AMD8131 chipsets, so there are
	102	+ * Controller, and ATCA-6101 has two AMD8131 chipsets, so there are
103	103	* four PCIX Bridges on ATCA-6101 altogether.
104	104	*
105	105	* These PCIX Bridges share the same PCI Device ID and are all of

drivers/edac/cell_edac.c+2−2

@@ -47,7 +47,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) · 46 unmodified lines
47	47	offset = address & ~PAGE_MASK;
48	48	syndrome = (ar & 0x000000001fe00000ul) >> 21;
49	49
50		− /* TODO: Decoding of the error addresss */
	50	+ /* TODO: Decoding of the error address */
51	51	edac_mc_handle_ce(mci, csrow->first_page + pfn, offset,
52	52	syndrome, 0, chan, "");
53	53	}
@@ -68,7 +68,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) · 14 unmodified lines
68	68	pfn = address >> PAGE_SHIFT;
69	69	offset = address & ~PAGE_MASK;
70	70
71		− /* TODO: Decoding of the error addresss */
	71	+ /* TODO: Decoding of the error address */
72	72	edac_mc_handle_ue(mci, csrow->first_page + pfn, offset, 0, "");
73	73	}
74	74

drivers/edac/edac_core.h+1−1

@@ -258,7 +258,7 @@ enum scrub_type { · 257 unmodified lines
258	258	* for single channel are 64 bits, for dual channel 128
259	259	* bits.
260	260	*
261		− * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memmory.
	261	+ * Single-Ranked stick: A Single-ranked stick has 1 chip-select row of memory.
262	262	* Motherboards commonly drive two chip-select pins to
263	263	* a memory stick. A single-ranked stick, will occupy
264	264	* only one of those rows. The other will be unused.

drivers/edac/ppc4xx_edac.c+3−3

@@ -873,7 +873,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1) · 872 unmodified lines
873	873	}
874	874
875	875	/**
876		− * ppc4xx_edac_init_csrows - intialize driver instance rows
	876	+ * ppc4xx_edac_init_csrows - initialize driver instance rows
877	877	* @mci: A pointer to the EDAC memory controller instance
878	878	* associated with the ibm,sdram-4xx-ddr2 controller for which
879	879	* the csrows (i.e. banks/ranks) are being initialized.
@@ -881,7 +881,7 @@ ppc4xx_edac_get_mtype(u32 mcopt1) · 1 unmodified line
881	881	* currently set for the controller, from which bank width
882	882	* and memory typ information is derived.
883	883	*
884		− * This routine intializes the virtual "chip select rows" associated
	884	+ * This routine initializes the virtual "chip select rows" associated
885	885	* with the EDAC memory controller instance. An ibm,sdram-4xx-ddr2
886	886	* controller bank/rank is mapped to a row.
887	887	*
@@ -992,7 +992,7 @@ ppc4xx_edac_init_csrows(struct mem_ctl_info *mci, u32 mcopt1) · 104 unmodified lines
992	992	}
993	993
994	994	/**
995		− * ppc4xx_edac_mc_init - intialize driver instance
	995	+ * ppc4xx_edac_mc_init - initialize driver instance
996	996	* @mci: A pointer to the EDAC memory controller instance being
997	997	* initialized.
998	998	* @op: A pointer to the OpenFirmware device tree node associated

drivers/gpu/drm/radeon/atombios.h+1−1

@@ -1314,7 +1314,7 @@ typedef struct _GET_ENGINE_CLOCK_PARAMETERS · 1313 unmodified lines
1314	1314	typedef struct _READ_EDID_FROM_HW_I2C_DATA_PARAMETERS
1315	1315	{
1316	1316	USHORT usPrescale; //Ratio between Engine clock and I2C clock
1317		− USHORT usVRAMAddress; //Adress in Frame Buffer where to pace raw EDID
	1317	+ USHORT usVRAMAddress; //Address in Frame Buffer where to pace raw EDID
1318	1318	USHORT usStatus; //When use output: lower byte EDID checksum, high byte hardware status
1319	1319	//WHen use input: lower byte as 'byte to read':currently limited to 128byte or 1byte
1320	1320	UCHAR ucSlaveAddr; //Read from which slave

drivers/i2c/busses/i2c-nomadik.c+2−2

@@ -434,7 +434,7 @@ static int read_i2c(struct nmk_i2c_dev *dev) · 433 unmodified lines
434	434	}
435	435
436	436	if (timeout == 0) {
437		− /* controler has timedout, re-init the h/w */
	437	+ /* controller has timedout, re-init the h/w */
438	438	dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
439	439	(void) init_hw(dev);
440	440	status = -ETIMEDOUT;
@@ -498,7 +498,7 @@ static int write_i2c(struct nmk_i2c_dev *dev) · 57 unmodified lines
498	498	}
499	499
500	500	if (timeout == 0) {
501		− /* controler has timedout, re-init the h/w */
	501	+ /* controller has timedout, re-init the h/w */
502	502	dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
503	503	(void) init_hw(dev);
504	504	status = -ETIMEDOUT;

drivers/infiniband/hw/cxgb3/cxio_wr.h+1−1

@@ -689,7 +689,7 @@ struct t3_swrq { · 688 unmodified lines
689	689	* A T3 WQ implements both the SQ and RQ.
690	690	*/
691	691	struct t3_wq {
692		− union t3_wr queue; / DMA accessable memory */
	692	+ union t3_wr queue; / DMA accessible memory */
693	693	dma_addr_t dma_addr; /* DMA address for HW */
694	694	DEFINE_DMA_UNMAP_ADDR(mapping); /* unmap kruft */
695	695	u32 error; /* 1 once we go to ERROR */

drivers/infiniband/hw/qib/qib_iba7322.c+1−1

@@ -314,7 +314,7 @@ MODULE_PARM_DESC(txselect, \ · 313 unmodified lines
314	314	#define krp_serdesctrl KREG_IBPORT_IDX(IBSerdesCtrl)
315	315
316	316	/*
317		− * Per-context kernel registers. Acess only with qib_read_kreg_ctxt()
	317	+ * Per-context kernel registers. Access only with qib_read_kreg_ctxt()
318	318	* or qib_write_kreg_ctxt()
319	319	*/
320	320	#define krc_rcvhdraddr KREG_IDX(RcvHdrAddr0)

drivers/input/touchscreen/Kconfig+1−1

@@ -610,7 +610,7 @@ config TOUCHSCREEN_USB_ZYTRONIC · 609 unmodified lines
610	610
611	611	config TOUCHSCREEN_USB_ETT_TC45USB
612	612	default y
613		− bool "ET&T USB series TC4UM/TC5UH touchscreen controler support" if EMBEDDED
	613	+ bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EMBEDDED
614	614	depends on TOUCHSCREEN_USB_COMPOSITE
615	615
616	616	config TOUCHSCREEN_USB_NEXIO

drivers/isdn/gigaset/bas-gigaset.c+2−2

@@ -2318,7 +2318,7 @@ static int gigaset_probe(struct usb_interface *interface, · 2317 unmodified lines
2318	2318	__func__, le16_to_cpu(udev->descriptor.idVendor),
2319	2319	le16_to_cpu(udev->descriptor.idProduct));
2320	2320
2321		− /* allocate memory for our device state and intialize it */
	2321	+ /* allocate memory for our device state and initialize it */
2322	2322	cs = gigaset_initcs(driver, BAS_CHANNELS, 0, 0, cidmode,
2323	2323	GIGASET_MODULENAME);
2324	2324	if (!cs)
@@ -2576,7 +2576,7 @@ static int __init bas_gigaset_init(void) · 251 unmodified lines
2576	2576	{
2577	2577	int result;
2578	2578
2579		− /* allocate memory for our driver state and intialize it */
	2579	+ /* allocate memory for our driver state and initialize it */
2580	2580	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
2581	2581	GIGASET_MODULENAME, GIGASET_DEVNAME,
2582	2582	&gigops, THIS_MODULE);

drivers/isdn/gigaset/ser-gigaset.c+2−2

@@ -513,7 +513,7 @@ gigaset_tty_open(struct tty_struct *tty) · 512 unmodified lines
513	513	return -ENODEV;
514	514	}
515	515
516		− /* allocate memory for our device state and intialize it */
	516	+ /* allocate memory for our device state and initialize it */
517	517	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
518	518	if (!cs)
519	519	goto error;
@@ -771,7 +771,7 @@ static int __init ser_gigaset_init(void) · 251 unmodified lines
771	771	return rc;
772	772	}
773	773
774		− /* allocate memory for our driver state and intialize it */
	774	+ /* allocate memory for our driver state and initialize it */
775	775	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
776	776	GIGASET_MODULENAME, GIGASET_DEVNAME,
777	777	&ops, THIS_MODULE);

drivers/isdn/gigaset/usb-gigaset.c+2−2

@@ -695,7 +695,7 @@ static int gigaset_probe(struct usb_interface *interface, · 694 unmodified lines
695	695
696	696	dev_info(&udev->dev, "%s: Device matched ... !\n", __func__);
697	697
698		− /* allocate memory for our device state and intialize it */
	698	+ /* allocate memory for our device state and initialize it */
699	699	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
700	700	if (!cs)
701	701	return -ENODEV;
@@ -894,7 +894,7 @@ static int __init usb_gigaset_init(void) · 192 unmodified lines
894	894	{
895	895	int result;
896	896
897		− /* allocate memory for our driver state and intialize it */
	897	+ /* allocate memory for our driver state and initialize it */
898	898	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
899	899	GIGASET_MODULENAME, GIGASET_DEVNAME,
900	900	&ops, THIS_MODULE);

drivers/isdn/hardware/mISDN/ipac.h+2−2

@@ -29,7 +29,7 @@ struct isac_hw { · 28 unmodified lines
29	29	u32 type;
30	30	u32 off; /* offset to isac regs */
31	31	char *name;
32		− spinlock_t hwlock; / lock HW acccess */
	32	+ spinlock_t hwlock; / lock HW access */
33	33	read_reg_func *read_reg;
34	34	write_reg_func *write_reg;
35	35	fifo_func *read_fifo;
@@ -70,7 +70,7 @@ struct ipac_hw { · 34 unmodified lines
70	70	struct hscx_hw hscx[2];
71	71	char *name;
72	72	void *hw;
73		− spinlock_t hwlock; / lock HW acccess */
	73	+ spinlock_t hwlock; / lock HW access */
74	74	struct module *owner;
75	75	u32 type;
76	76	read_reg_func *read_reg;

drivers/isdn/hardware/mISDN/isar.h+1−1

@@ -44,7 +44,7 @@ struct isar_ch { · 43 unmodified lines
44	44	struct isar_hw {
45	45	struct isar_ch ch[2];
46	46	void *hw;
47		− spinlock_t hwlock; / lock HW acccess */
	47	+ spinlock_t hwlock; / lock HW access */
48	48	char *name;
49	49	struct module *owner;
50	50	read_reg_func *read_reg;

drivers/isdn/hisax/isar.c+2−2

@@ -1427,8 +1427,8 @@ modeisar(struct BCState *bcs, int mode, int bc) · 1426 unmodified lines
1427	1427	&bcs->hw.isar.reg->Flags))
1428	1428	bcs->hw.isar.dpath = 1;
1429	1429	else {
1430		− printk(KERN_WARNING"isar modeisar analog funktions only with DP1\n");
1431		− debugl1(cs, "isar modeisar analog funktions only with DP1");
	1430	+ printk(KERN_WARNING"isar modeisar analog functions only with DP1\n");
	1431	+ debugl1(cs, "isar modeisar analog functions only with DP1");
1432	1432	return(1);
1433	1433	}
1434	1434	break;

drivers/media/video/cx25840/cx25840-ir.c+1−1

@@ -261,7 +261,7 @@ static u16 ns_to_pulse_width_count(u32 ns, u16 divider) · 260 unmodified lines
261	261	u32 rem;
262	262
263	263	/*
264		− * The 2 lsb's of the pulse width timer count are not accessable, hence
	264	+ * The 2 lsb's of the pulse width timer count are not accessible, hence
265	265	* the (1 << 2)
266	266	*/
267	267	n = ((u64) ns) * CX25840_IR_REFCLK_FREQ / 1000000; /* millicycles */

drivers/media/video/davinci/vpif.h+1−1

@@ -33,7 +33,7 @@ extern spinlock_t vpif_lock; · 32 unmodified lines
33	33	#define regr(reg) readl((reg) + vpif_base)
34	34	#define regw(value, reg) writel(value, (reg + vpif_base))
35	35
36		−/* Register Addresss Offsets */
	36	+/* Register Address Offsets */
37	37	#define VPIF_PID (0x0000)
38	38	#define VPIF_CH0_CTRL (0x0004)
39	39	#define VPIF_CH1_CTRL (0x0008)

drivers/media/video/davinci/vpss.c+1−1

@@ -85,7 +85,7 @@ enum vpss_platform_type { · 84 unmodified lines
85	85	/*
86	86	* vpss operations. Depends on platform. Not all functions are available
87	87	* on all platforms. The api, first check if a functio is available before
88		− * invoking it. In the probe, the function ptrs are intialized based on
	88	+ * invoking it. In the probe, the function ptrs are initialized based on
89	89	* vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc.
90	90	*/
91	91	struct vpss_hw_ops {

drivers/media/video/omap/omap_vout.c+1−1

@@ -1286,7 +1286,7 @@ static int omap_vout_release(struct file *file) · 1285 unmodified lines
1286	1286	videobuf_mmap_free(q);
1287	1287
1288	1288	/* Even if apply changes fails we should continue
1289		− freeing allocated memeory */
	1289	+ freeing allocated memory */
1290	1290	if (vout->streaming) {
1291	1291	u32 mask = 0;
1292	1292

drivers/media/video/saa7164/saa7164-core.c+2−2

@@ -653,8 +653,8 @@ static irqreturn_t saa7164_irq(int irq, void *dev_id) · 652 unmodified lines
653	653	goto out;
654	654	}
655	655
656		− /* Check that the hardware is accessable. If the status bytes are
657		− * 0xFF then the device is not accessable, the the IRQ belongs
	656	+ /* Check that the hardware is accessible. If the status bytes are
	657	+ * 0xFF then the device is not accessible, the the IRQ belongs
658	658	* to another driver.
659	659	* 4 x u32 interrupt registers.
660	660	*/

drivers/media/video/sn9c102/sn9c102_sensor.h+1−1

@@ -147,7 +147,7 @@ enum sn9c102_i2c_interface { · 146 unmodified lines
147	147
148	148	struct sn9c102_sensor {
149	149	char name[32], /* sensor name */
150		− maintainer[64]; /* name of the mantainer <email> */
	150	+ maintainer[64]; /* name of the maintainer <email> */
151	151
152	152	enum sn9c102_bridge supported_bridge; /* supported SN9C1xx bridges */
153	153

drivers/media/video/zoran/zoran.h+1−1

@@ -95,7 +95,7 @@ struct zoran_params { · 94 unmodified lines
95	95
96	96	int quality; /* Measure for quality of compressed images.
97	97	* Scales linearly with the size of the compressed images.
98		− * Must be beetween 0 and 100, 100 is a compression
	98	+ * Must be between 0 and 100, 100 is a compression
99	99	* ratio of 1:4 */
100	100
101	101	int odd_even; /* Which field should come first ??? */

drivers/message/fusion/lsi/mpi_log_sas.h+1−1

@@ -268,7 +268,7 @@ · 267 unmodified lines
268	268
269	269	/* Compatibility Error : IR Disabled */
270	270	#define IR_LOGINFO_COMPAT_ERROR_RAID_DISABLED (0x00010030)
271		−/* Compatibility Error : Inquiry Comand failed */
	271	+/* Compatibility Error : Inquiry Command failed */
272	272	#define IR_LOGINFO_COMPAT_ERROR_INQUIRY_FAILED (0x00010031)
273	273	/* Compatibility Error : Device not direct access device */
274	274	#define IR_LOGINFO_COMPAT_ERROR_NOT_DIRECT_ACCESS (0x00010032)

drivers/message/fusion/mptbase.c+1−1

@@ -7977,7 +7977,7 @@ mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info) · 7976 unmodified lines
7977	7977	NULL, /* 2Eh */
7978	7978	NULL, /* 2Fh */
7979	7979	"Compatibility Error: IR Disabled", /* 30h */
7980		− "Compatibility Error: Inquiry Comand Failed", /* 31h */
	7980	+ "Compatibility Error: Inquiry Command Failed", /* 31h */
7981	7981	"Compatibility Error: Device not Direct Access "
7982	7982	"Device ", /* 32h */
7983	7983	"Compatibility Error: Removable Device Found", /* 33h */

drivers/message/fusion/mptsas.c+1−1

@@ -1146,7 +1146,7 @@ mptsas_target_reset_queue(MPT_ADAPTER *ioc, · 1145 unmodified lines
1146	1146	*
1147	1147	* This function will delete scheduled target reset from the list and
1148	1148	* try to send next target reset. This will be called from completion
1149		− * context of any Task managment command.
	1149	+ * context of any Task management command.
1150	1150	*/
1151	1151
1152	1152	void

drivers/message/i2o/i2o_block.c+1−1

@@ -309,7 +309,7 @@ static inline void i2o_block_request_free(struct i2o_block_request *ireq) · 308 unmodified lines
309	309	* @ireq: I2O block request
310	310	* @mptr: message body pointer
311	311	*
312		− * Builds the SG list and map it to be accessable by the controller.
	312	+ * Builds the SG list and map it to be accessible by the controller.
313	313	*
314	314	* Returns 0 on failure or 1 on success.
315	315	*/

drivers/misc/arm-charlcd.c+1−1

@@ -313,7 +313,7 @@ static int __init charlcd_probe(struct platform_device *pdev) · 312 unmodified lines
313	313	INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work);
314	314	schedule_delayed_work(&lcd->init_work, 0);
315	315
316		− dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n",
	316	+ dev_info(&pdev->dev, "initialized ARM character LCD at %08x\n",
317	317	lcd->phybase);
318	318
319	319	return 0;

drivers/mmc/card/block.c+1−1

@@ -257,7 +257,7 @@ static u32 get_card_status(struct mmc_card card, struct request req) · 256 unmodified lines
257	257	cmd.flags = MMC_RSP_SPI_R2 \| MMC_RSP_R1 \| MMC_CMD_AC;
258	258	err = mmc_wait_for_cmd(card->host, &cmd, 0);
259	259	if (err)
260		− printk(KERN_ERR "%s: error %d sending status comand",
	260	+ printk(KERN_ERR "%s: error %d sending status command",
261	261	req->rq_disk->disk_name, err);
262	262	return cmd.resp[0];
263	263	}

drivers/mmc/host/Kconfig+1−1

@@ -462,7 +462,7 @@ config MMC_SH_MMCIF · 461 unmodified lines
462	462	tristate "SuperH Internal MMCIF support"
463	463	depends on MMC_BLOCK && (SUPERH \|\| ARCH_SHMOBILE)
464	464	help
465		− This selects the MMC Host Interface controler (MMCIF).
	465	+ This selects the MMC Host Interface controller (MMCIF).
466	466
467	467	This driver supports MMCIF in sh7724/sh7757/sh7372.
468	468

drivers/mmc/host/au1xmmc.c+1−1

@@ -192,7 +192,7 @@ static inline void SEND_STOP(struct au1xmmc_host *host) · 191 unmodified lines
192	192	au_writel(config2 \| SD_CONFIG2_DF, HOST_CONFIG2(host));
193	193	au_sync();
194	194
195		− /* Send the stop commmand */
	195	+ /* Send the stop command */
196	196	au_writel(STOP_CMD, HOST_CMD(host));
197	197	}
198	198

drivers/mmc/host/sdricoh_cs.c+2−2

@@ -446,7 +446,7 @@ static int sdricoh_init_mmc(struct pci_dev *pci_dev, · 445 unmodified lines
446	446	mmc->max_seg_size = 1024 * 512;
447	447	mmc->max_blk_size = 512;
448	448
449		− /* reset the controler */
	449	+ /* reset the controller */
450	450	if (sdricoh_reset(host)) {
451	451	dev_dbg(dev, "could not reset\n");
452	452	result = -EIO;
@@ -478,7 +478,7 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev) · 25 unmodified lines
478	478	dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
479	479	" %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
480	480
481		− /* search pci cardbus bridge that contains the mmc controler */
	481	+ /* search pci cardbus bridge that contains the mmc controller */
482	482	/* the io region is already claimed by yenta_socket... */
483	483	while ((pci_dev =
484	484	pci_get_device(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_RL5C476,

drivers/mtd/nand/nand_base.c+1−1

@@ -821,7 +821,7 @@ retry: · 820 unmodified lines
821	821	*
822	822	* Wait for command done. This is a helper function for nand_wait used when
823	823	* we are in interrupt context. May happen when in panic and trying to write
824		− * an oops trough mtdoops.
	824	+ * an oops through mtdoops.
825	825	*/
826	826	static void panic_nand_wait(struct mtd_info mtd, struct nand_chip chip,
827	827	unsigned long timeo)

drivers/net/bnx2x/bnx2x_main.c+1−1

@@ -4947,7 +4947,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp, u32 load_code) · 4946 unmodified lines
4947	4947	memset(&ilt_cli, 0, sizeof(struct ilt_client_info));
4948	4948	memset(&ilt, 0, sizeof(struct bnx2x_ilt));
4949	4949
4950		− /* initalize dummy TM client */
	4950	+ /* initialize dummy TM client */
4951	4951	ilt_cli.start = 0;
4952	4952	ilt_cli.end = ILT_NUM_PAGE_ENTRIES - 1;
4953	4953	ilt_cli.client_num = ILT_CLIENT_TM;

drivers/net/bnx2x/bnx2x_reg.h+1−1

@@ -1604,7 +1604,7 @@ · 1603 unmodified lines
1604	1604	(~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
1605	1605	#define MISC_REG_SW_TIMER_RELOAD_VAL_4 0xa2fc
1606	1606	/* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
1607		− in this register. addres 0 - timer 1; address 1 - timer 2, ... address 7 -
	1607	+ in this register. address 0 - timer 1; address 1 - timer 2, ... address 7 -
1608	1608	timer 8 */
1609	1609	#define MISC_REG_SW_TIMER_VAL 0xa5c0
1610	1610	/* [RW 1] Set by the MCP to remember if one or more of the drivers is/are

drivers/net/bonding/bond_3ad.c+3−3

@@ -840,7 +840,7 @@ static int ad_lacpdu_send(struct port *port) · 839 unmodified lines
840	840	lacpdu_header = (struct lacpdu_header *)skb_put(skb, length);
841	841
842	842	memcpy(lacpdu_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
843		− /* Note: source addres is set to be the member's PERMANENT address,
	843	+ /* Note: source address is set to be the member's PERMANENT address,
844	844	because we use it to identify loopback lacpdus in receive. */
845	845	memcpy(lacpdu_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
846	846	lacpdu_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -881,7 +881,7 @@ static int ad_marker_send(struct port port, struct bond_marker marker) · 34 unmodified lines
881	881	marker_header = (struct bond_marker_header *)skb_put(skb, length);
882	882
883	883	memcpy(marker_header->hdr.h_dest, lacpdu_mcast_addr, ETH_ALEN);
884		− /* Note: source addres is set to be the member's PERMANENT address,
	884	+ /* Note: source address is set to be the member's PERMANENT address,
885	885	because we use it to identify loopback MARKERs in receive. */
886	886	memcpy(marker_header->hdr.h_source, slave->perm_hwaddr, ETH_ALEN);
887	887	marker_header->hdr.h_proto = PKT_TYPE_LACPDU;
@@ -1916,7 +1916,7 @@ int bond_3ad_bind_slave(struct slave *slave) · 1028 unmodified lines
1916	1916	return -1;
1917	1917	}
1918	1918
1919		− //check that the slave has not been intialized yet.
	1919	+ //check that the slave has not been initialized yet.
1920	1920	if (SLAVE_AD_INFO(slave).port.slave != slave) {
1921	1921
1922	1922	// port initialization

drivers/net/chelsio/subr.c+1−1

@@ -556,7 +556,7 @@ struct chelsio_vpd_t { · 555 unmodified lines
556	556	#define EEPROM_MAX_POLL 4
557	557
558	558	/*
559		− * Read SEEPROM. A zero is written to the flag register when the addres is
	559	+ * Read SEEPROM. A zero is written to the flag register when the address is
560	560	* written to the Control register. The hardware device will set the flag to a
561	561	* one when 4B have been transferred to the Data register.
562	562	*/

drivers/net/cxgb3/mc5.c+1−1

@@ -318,7 +318,7 @@ static void mc5_dbgi_mode_disable(const struct mc5 *mc5) · 317 unmodified lines
318	318
319	319	/*
320	320	* Initialization that requires the OS and protocol layers to already
321		− * be intialized goes here.
	321	+ * be initialized goes here.
322	322	*/
323	323	int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
324	324	unsigned int nroutes)

drivers/net/cxgb3/t3_hw.c+1−1

@@ -607,7 +607,7 @@ struct t3_vpd { · 606 unmodified lines
607	607	*
608	608	* Read a 32-bit word from a location in VPD EEPROM using the card's PCI
609	609	* VPD ROM capability. A zero is written to the flag bit when the
610		− * addres is written to the control register. The hardware device will
	610	+ * address is written to the control register. The hardware device will
611	611	* set the flag to 1 when 4 bytes have been read into the data register.
612	612	*/
613	613	int t3_seeprom_read(struct adapter adapter, u32 addr, __le32 data)

drivers/net/e1000/e1000_hw.h+1−1

@@ -41,7 +41,7 @@ struct e1000_hw; · 40 unmodified lines
41	41	struct e1000_hw_stats;
42	42
43	43	/* Enumerated types specific to the e1000 hardware */
44		−/* Media Access Controlers */
	44	+/* Media Access Controllers */
45	45	typedef enum {
46	46	e1000_undefined = 0,
47	47	e1000_82542_rev2_0,

drivers/net/e1000/e1000_main.c+1−1

@@ -2194,7 +2194,7 @@ static void e1000_set_rx_mode(struct net_device *netdev) · 2193 unmodified lines
2194	2194	* addresses take precedence to avoid disabling unicast filtering
2195	2195	* when possible.
2196	2196	*
2197		− * RAR 0 is used for the station MAC adddress
	2197	+ * RAR 0 is used for the station MAC address
2198	2198	* if there are not 14 addresses, go ahead and clear the filters
2199	2199	*/
2200	2200	i = 1;

drivers/net/e1000e/82571.c+1−1

@@ -300,7 +300,7 @@ static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter) · 299 unmodified lines
300	300
301	301	/*
302	302	* Ensure that the inter-port SWSM.SMBI lock bit is clear before
303		− * first NVM or PHY acess. This should be done for single-port
	303	+ * first NVM or PHY access. This should be done for single-port
304	304	* devices, and for one port only on dual-port devices so that
305	305	* for those devices we can still use the SMBI lock to synchronize
306	306	* inter-port accesses to the PHY & NVM.

drivers/net/e1000e/ich8lan.c+1−1

@@ -321,7 +321,7 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) · 320 unmodified lines
321	321	}
322	322
323	323	/*
324		− * Reset the PHY before any acccess to it. Doing so, ensures that
	324	+ * Reset the PHY before any access to it. Doing so, ensures that
325	325	* the PHY is in a known good state before we read/write PHY registers.
326	326	* The generic reset is sufficient here, because we haven't determined
327	327	* the PHY type yet.

drivers/net/e1000e/phy.c+1−1

@@ -2976,7 +2976,7 @@ s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data) · 2975 unmodified lines
2976	2976	}
2977	2977
2978	2978	/**
2979		− * e1000_get_phy_addr_for_hv_page - Get PHY adrress based on page
	2979	+ * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
2980	2980	* @page: page to be accessed
2981	2981	**/
2982	2982	static u32 e1000_get_phy_addr_for_hv_page(u32 page)

drivers/net/eepro.c+1−1

@@ -1760,7 +1760,7 @@ module_param_array(io, int, NULL, 0); · 1759 unmodified lines
1760	1760	module_param_array(irq, int, NULL, 0);
1761	1761	module_param_array(mem, int, NULL, 0);
1762	1762	module_param(autodetect, int, 0);
1763		−MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base addres(es)");
	1763	+MODULE_PARM_DESC(io, "EtherExpress Pro/10 I/O base address(es)");
1764	1764	MODULE_PARM_DESC(irq, "EtherExpress Pro/10 IRQ number(s)");
1765	1765	MODULE_PARM_DESC(mem, "EtherExpress Pro/10 Rx buffer size(es) in kB (3-29)");
1766	1766	MODULE_PARM_DESC(autodetect, "EtherExpress Pro/10 force board(s) detection (0-1)");

drivers/net/irda/donauboe.h+1−1

@@ -30,7 +30,7 @@ · 29 unmodified lines
30	30	* or the type-DO IR port.
31	31	*
32	32	* IrDA chip set list from Toshiba Computer Engineering Corp.
33		− * model method maker controler Version
	33	+ * model method maker controller Version
34	34	* Portege 320CT FIR,SIR Toshiba Oboe(Triangle)
35	35	* Portege 3010CT FIR,SIR Toshiba Oboe(Sydney)
36	36	* Portege 3015CT FIR,SIR Toshiba Oboe(Sydney)

drivers/net/ixgbe/ixgbe_82599.c+2−2

@@ -1078,7 +1078,7 @@ s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc) · 1077 unmodified lines
1078	1078
1079	1079	/*
1080	1080	* The defaults in the HW for RX PB 1-7 are not zero and so should be
1081		− * intialized to zero for non DCB mode otherwise actual total RX PB
	1081	+ * initialized to zero for non DCB mode otherwise actual total RX PB
1082	1082	* would be bigger than programmed and filter space would run into
1083	1083	* the PB 0 region.
1084	1084	*/
@@ -1169,7 +1169,7 @@ s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc) · 84 unmodified lines
1169	1169
1170	1170	/*
1171	1171	* The defaults in the HW for RX PB 1-7 are not zero and so should be
1172		− * intialized to zero for non DCB mode otherwise actual total RX PB
	1172	+ * initialized to zero for non DCB mode otherwise actual total RX PB
1173	1173	* would be bigger than programmed and filter space would run into
1174	1174	* the PB 0 region.
1175	1175	*/

drivers/net/ll_temac_main.c+1−1

@@ -238,7 +238,7 @@ static int temac_dma_bd_init(struct net_device *ndev) · 237 unmodified lines
238	238	goto out;
239	239	}
240	240	/* allocate the tx and rx ring buffer descriptors. */
241		− /* returns a virtual addres and a physical address. */
	241	+ /* returns a virtual address and a physical address. */
242	242	lp->tx_bd_v = dma_alloc_coherent(ndev->dev.parent,
243	243	sizeof(lp->tx_bd_v) TX_BD_NUM,
244	244	&lp->tx_bd_p, GFP_KERNEL);

drivers/net/sis900.c+1−1

@@ -36,7 +36,7 @@ · 35 unmodified lines
36	36	Rev 1.07.06 Nov. 7 2000 Jeff Garzik <jgarzik@pobox.com> some bug fix and cleaning
37	37	Rev 1.07.05 Nov. 6 2000 metapirat<metapirat@gmx.de> contribute media type select by ifconfig
38	38	Rev 1.07.04 Sep. 6 2000 Lei-Chun Chang added ICS1893 PHY support
39		− Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E eqaulizer workaround rule
	39	+ Rev 1.07.03 Aug. 24 2000 Lei-Chun Chang (lcchang@sis.com.tw) modified 630E equalizer workaround rule
40	40	Rev 1.07.01 Aug. 08 2000 Ollie Lho minor update for SiS 630E and SiS 630E A1
41	41	Rev 1.07 Mar. 07 2000 Ollie Lho bug fix in Rx buffer ring
42	42	Rev 1.06.04 Feb. 11 2000 Jeff Garzik <jgarzik@pobox.com> softnet and init for kernel 2.4

drivers/net/tehuti.c+3−3

@@ -12,7 +12,7 @@ · 11 unmodified lines
12	12	/*
13	13	* RX HW/SW interaction overview
14	14	* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15		− * There are 2 types of RX communication channels betwean driver and NIC.
	15	+ * There are 2 types of RX communication channels between driver and NIC.
16	16	* 1) RX Free Fifo - RXF - holds descriptors of empty buffers to accept incoming
17	17	* traffic. This Fifo is filled by SW and is readen by HW. Each descriptor holds
18	18	* info about buffer's location, size and ID. An ID field is used to identify a
@@ -821,7 +821,7 @@ static void bdx_setmulti(struct net_device *ndev) · 802 unmodified lines
821	821	}
822	822
823	823	/* use PMF to accept first MAC_MCST_NUM (15) addresses */
824		− /* TBD: sort addreses and write them in ascending order
	824	+ /* TBD: sort addresses and write them in ascending order
825	825	* into RX_MAC_MCST regs. we skip this phase now and accept ALL
826	826	* multicast frames throu IMF */
827	827	/* accept the rest of addresses throu IMF */
@@ -1346,7 +1346,7 @@ static void print_rxfd(struct rxf_desc *rxfd) · 518 unmodified lines
1346	1346	/*
1347	1347	* TX HW/SW interaction overview
1348	1348	* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1349		− * There are 2 types of TX communication channels betwean driver and NIC.
	1349	+ * There are 2 types of TX communication channels between driver and NIC.
1350	1350	* 1) TX Free Fifo - TXF - holds ack descriptors for sent packets
1351	1351	* 2) TX Data Fifo - TXD - holds descriptors of full buffers.
1352	1352	*

drivers/net/tun.c+1−1

@@ -1309,7 +1309,7 @@ static long __tun_chr_ioctl(struct file *file, unsigned int cmd, · 1308 unmodified lines
1309	1309	break;
1310	1310
1311	1311	case SIOCGIFHWADDR:
1312		− /* Get hw addres */
	1312	+ /* Get hw address */
1313	1313	memcpy(ifr.ifr_hwaddr.sa_data, tun->dev->dev_addr, ETH_ALEN);
1314	1314	ifr.ifr_hwaddr.sa_family = tun->dev->type;
1315	1315	if (copy_to_user(argp, &ifr, ifreq_len))

drivers/net/vxge/vxge-traffic.h+1−1

@@ -1695,7 +1695,7 @@ struct vxge_hw_device_stats_sw_err { · 1694 unmodified lines
1695	1695	* struct vxge_hw_device_stats - Contains HW per-device statistics,
1696	1696	* including hw.
1697	1697	* @devh: HW device handle.
1698		− * @dma_addr: DMA addres of the %hw_info. Given to device to fill-in the stats.
	1698	+ * @dma_addr: DMA address of the %hw_info. Given to device to fill-in the stats.
1699	1699	* @hw_info_dmah: DMA handle used to map hw statistics onto the device memory
1700	1700	* space.
1701	1701	* @hw_info_dma_acch: One more DMA handle used subsequently to free the

drivers/net/wan/dscc4.c+1−1

@@ -125,7 +125,7 @@ static u32 dscc4_pci_config_store[16]; · 124 unmodified lines
125	125	/* Module parameters */
126	126
127	127	MODULE_AUTHOR("Maintainer: Francois Romieu <romieu@cogenit.fr>");
128		−MODULE_DESCRIPTION("Siemens PEB20534 PCI Controler");
	128	+MODULE_DESCRIPTION("Siemens PEB20534 PCI Controller");
129	129	MODULE_LICENSE("GPL");
130	130	module_param(debug, int, 0);
131	131	MODULE_PARM_DESC(debug,"Enable/disable extra messages");

drivers/net/wimax/i2400m/driver.c+1−1

@@ -280,7 +280,7 @@ int i2400m_check_mac_addr(struct i2400m *i2400m) · 279 unmodified lines
280	280	result);
281	281	goto error;
282	282	}
283		− /* Extract MAC addresss */
	283	+ /* Extract MAC address */
284	284	ddi = (void *) skb->data;
285	285	BUILD_BUG_ON(ETH_ALEN != sizeof(ddi->mac_address));
286	286	d_printf(2, dev, "GET DEVICE INFO: mac addr %pM\n",

drivers/net/wimax/i2400m/i2400m.h+1−1

@@ -698,7 +698,7 @@ enum i2400m_bm_cmd_flags { · 697 unmodified lines
698	698	* @I2400M_BRI_MAC_REINIT: We need to reinitialize the boot
699	699	* rom after reading the MAC address. This is quite a dirty hack,
700	700	* if you ask me -- the device requires the bootrom to be
701		− * intialized after reading the MAC address.
	701	+ * initialized after reading the MAC address.
702	702	*/
703	703	enum i2400m_bri {
704	704	I2400M_BRI_SOFT = 1 << 1,

drivers/net/wireless/ath/ath5k/reg.h+3−3

@@ -1063,7 +1063,7 @@ · 1062 unmodified lines
1063	1063	/*
1064	1064	* EEPROM command register
1065	1065	*/
1066		−#define AR5K_EEPROM_CMD 0x6008 /* Register Addres */
	1066	+#define AR5K_EEPROM_CMD 0x6008 /* Register Address */
1067	1067	#define AR5K_EEPROM_CMD_READ 0x00000001 /* EEPROM read */
1068	1068	#define AR5K_EEPROM_CMD_WRITE 0x00000002 /* EEPROM write */
1069	1069	#define AR5K_EEPROM_CMD_RESET 0x00000004 /* EEPROM reset */
@@ -1083,7 +1083,7 @@ · 13 unmodified lines
1083	1083	/*
1084	1084	* EEPROM config register
1085	1085	*/
1086		−#define AR5K_EEPROM_CFG 0x6010 /* Register Addres */
	1086	+#define AR5K_EEPROM_CFG 0x6010 /* Register Address */
1087	1087	#define AR5K_EEPROM_CFG_SIZE 0x00000003 /* Size determination override */
1088	1088	#define AR5K_EEPROM_CFG_SIZE_AUTO 0
1089	1089	#define AR5K_EEPROM_CFG_SIZE_4KBIT 1
@@ -1125,7 +1125,7 @@ · 35 unmodified lines
1125	1125	* Second station id register (Upper 16 bits of MAC address + PCU settings)
1126	1126	*/
1127	1127	#define AR5K_STA_ID1 0x8004 /* Register Address */
1128		−#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC addres */
	1128	+#define AR5K_STA_ID1_ADDR_U16 0x0000ffff /* Upper 16 bits of MAC address */
1129	1129	#define AR5K_STA_ID1_AP 0x00010000 /* Set AP mode */
1130	1130	#define AR5K_STA_ID1_ADHOC 0x00020000 /* Set Ad-Hoc mode */
1131	1131	#define AR5K_STA_ID1_PWR_SV 0x00040000 /* Power save reporting */

drivers/net/wireless/b43/phy_g.c+1−1

@@ -1919,7 +1919,7 @@ static void b43_hardware_pctl_init_gphy(struct b43_wldev *dev) · 1918 unmodified lines
1919	1919	b43_hf_write(dev, b43_hf_read(dev) \| B43_HF_HWPCTL);
1920	1920	}
1921	1921
1922		−/* Intialize B/G PHY power control */
	1922	+/* Initialize B/G PHY power control */
1923	1923	static void b43_phy_init_pctl(struct b43_wldev *dev)
1924	1924	{
1925	1925	struct ssb_bus *bus = dev->dev->bus;

drivers/net/wireless/b43legacy/phy.c+1−1

@@ -153,7 +153,7 @@ void b43legacy_phy_calibrate(struct b43legacy_wldev *dev) · 152 unmodified lines
153	153	phy->calibrated = 1;
154	154	}
155	155
156		−/* intialize B PHY power control
	156	+/* initialize B PHY power control
157	157	* as described in http://bcm-specs.sipsolutions.net/InitPowerControl
158	158	*/
159	159	static void b43legacy_phy_init_pctl(struct b43legacy_wldev *dev)

drivers/net/wireless/iwlwifi/iwl-sta.c+1−1

@@ -107,7 +107,7 @@ static int iwl_process_add_sta_resp(struct iwl_priv *priv, · 106 unmodified lines
107	107	/*
108	108	* XXX: The MAC address in the command buffer is often changed from
109	109	* the original sent to the device. That is, the MAC address
110		− * written to the command buffer often is not the same MAC adress
	110	+ * written to the command buffer often is not the same MAC address
111	111	* read from the command buffer when the command returns. This
112	112	* issue has not yet been resolved and this debugging is left to
113	113	* observe the problem.

drivers/net/wireless/prism54/islpci_dev.c+3−3

@@ -630,7 +630,7 @@ islpci_alloc_memory(islpci_private *priv) · 629 unmodified lines
630	630	printk(KERN_DEBUG "islpci_alloc_memory\n");
631	631	#endif
632	632
633		− /* remap the PCI device base address to accessable */
	633	+ /* remap the PCI device base address to accessible */
634	634	if (!(priv->device_base =
635	635	ioremap(pci_resource_start(priv->pdev, 0),
636	636	ISL38XX_PCI_MEM_SIZE))) {
@@ -709,7 +709,7 @@ islpci_alloc_memory(islpci_private *priv) · 72 unmodified lines
709	709	PCI_DMA_FROMDEVICE);
710	710	if (!priv->pci_map_rx_address[counter]) {
711	711	/* error mapping the buffer to device
712		− accessable memory address */
	712	+ accessible memory address */
713	713	printk(KERN_ERR "failed to map skb DMA'able\n");
714	714	goto out_free;
715	715	}
@@ -773,7 +773,7 @@ islpci_free_memory(islpci_private *priv) · 57 unmodified lines
773	773	priv->data_low_rx[counter] = NULL;
774	774	}
775	775
776		− /* Free the acces control list and the WPA list */
	776	+ /* Free the access control list and the WPA list */
777	777	prism54_acl_clean(&priv->acl);
778	778	prism54_wpa_bss_ie_clean(priv);
779	779	mgt_clean(priv);

drivers/net/wireless/prism54/islpci_eth.c+1−1

@@ -450,7 +450,7 @@ islpci_eth_receive(islpci_private *priv) · 449 unmodified lines
450	450	MAX_FRAGMENT_SIZE_RX + 2,
451	451	PCI_DMA_FROMDEVICE);
452	452	if (unlikely(!priv->pci_map_rx_address[index])) {
453		− /* error mapping the buffer to device accessable memory address */
	453	+ /* error mapping the buffer to device accessible memory address */
454	454	DEBUG(SHOW_ERROR_MESSAGES,
455	455	"Error mapping DMA address\n");
456	456

drivers/net/wireless/rt2x00/rt2x00mac.c+1−1

@@ -274,7 +274,7 @@ int rt2x00mac_add_interface(struct ieee80211_hw *hw, · 273 unmodified lines
274	274	intf->beacon = entry;
275	275
276	276	/*
277		− * The MAC adddress must be configured after the device
	277	+ * The MAC address must be configured after the device
278	278	* has been initialized. Otherwise the device can reset
279	279	* the MAC registers.
280	280	* The BSSID address must only be configured in AP mode,

drivers/net/wireless/wl3501_cs.c+1−1

@@ -192,7 +192,7 @@ static inline void wl3501_switch_page(struct wl3501_card *this, u8 page) · 191 unmodified lines
192	192	}
193	193
194	194	/*
195		− * Get Ethernet MAC addresss.
	195	+ * Get Ethernet MAC address.
196	196	*
197	197	* WARNING: We switch to FPAGE0 and switc back again.
198	198	* Making sure there is no other WL function beening called by ISR.

drivers/pcmcia/m32r_cfc.h+1−1

@@ -9,7 +9,7 @@ · 8 unmodified lines
9	9	#endif
10	10
11	11	/*
12		− * M32R PC Card Controler
	12	+ * M32R PC Card Controller
13	13	*/
14	14	#define M32R_PCC0_BASE 0x00ef7000
15	15	#define M32R_PCC1_BASE 0x00ef7020

drivers/pcmcia/m32r_pcc.h+1−1

@@ -5,7 +5,7 @@ · 4 unmodified lines
5	5	#define M32R_MAX_PCC 2
6	6
7	7	/*
8		− * M32R PC Card Controler
	8	+ * M32R PC Card Controller
9	9	*/
10	10	#define M32R_PCC0_BASE 0x00ef7000
11	11	#define M32R_PCC1_BASE 0x00ef7020

drivers/pcmcia/m8xx_pcmcia.c+1−1

@@ -1198,7 +1198,7 @@ static int __init m8xx_probe(struct platform_device *ofdev, · 1197 unmodified lines
1198	1198	out_be32(M8XX_PGCRX(1),
1199	1199	M8XX_PGCRX_CXOE \| (mk_int_int_mask(hwirq) << 16));
1200	1200
1201		− /* intialize the fixed memory windows */
	1201	+ /* initialize the fixed memory windows */
1202	1202
1203	1203	for (i = 0; i < PCMCIA_SOCKETS_NO; i++) {
1204	1204	for (m = 0; m < PCMCIA_MEM_WIN_NO; m++) {

drivers/platform/x86/thinkpad_acpi.c+1−1

@@ -7193,7 +7193,7 @@ static struct ibm_struct volume_driver_data = { · 7192 unmodified lines
7193	7193	* TPACPI_FAN_WR_ACPI_FANS (X31/X40/X41)
7194	7194	*
7195	7195	* FIRMWARE BUG: on some models, EC 0x2f might not be initialized at
7196		− * boot. Apparently the EC does not intialize it, so unless ACPI DSDT
	7196	+ * boot. Apparently the EC does not initialize it, so unless ACPI DSDT
7197	7197	* does so, its initial value is meaningless (0x07).
7198	7198	*
7199	7199	* For firmware bugs, refer to:

drivers/power/s3c_adc_battery.c+2−2

@@ -1,5 +1,5 @@
1	1	/*
2		− * iPAQ h1930/h1940/rx1950 battery controler driver
	2	+ * iPAQ h1930/h1940/rx1950 battery controller driver
3	3	* Copyright (c) Vasily Khoruzhick
4	4	* Based on h1940_battery.c by Arnaud Patard
5	5	*
@@ -427,5 +427,5 @@ static void __exit s3c_adc_bat_exit(void) · 421 unmodified lines
427	427	module_exit(s3c_adc_bat_exit);
428	428
429	429	MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
430		−MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controler driver");
	430	+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver");
431	431	MODULE_LICENSE("GPL");

drivers/s390/net/lcs.c+1−1

@@ -840,7 +840,7 @@ lcs_notify_lancmd_waiters(struct lcs_card card, struct lcs_cmd cmd) · 839 unmodified lines
840	840	}
841	841
842	842	/**
843		− * Emit buffer of a lan comand.
	843	+ * Emit buffer of a lan command.
844	844	*/
845	845	static void
846	846	lcs_lancmd_timeout(unsigned long data)

drivers/s390/scsi/zfcp_cfdc.c+1−1

@@ -317,7 +317,7 @@ static void zfcp_act_eval_err(struct zfcp_adapter *adapter, u32 table) · 316 unmodified lines
317	317
318	318	/**
319	319	* zfcp_cfdc_port_denied - Process "access denied" for port
320		− * @port: The port where the acces has been denied
	320	+ * @port: The port where the access has been denied
321	321	* @qual: The FSF status qualifier for the access denied FSF status
322	322	*/
323	323	void zfcp_cfdc_port_denied(struct zfcp_port *port,

drivers/scsi/a100u2w.c+1−1

@@ -416,7 +416,7 @@ static u8 orc_load_firmware(struct orc_host * host) · 415 unmodified lines
416	416	/* Go back and check they match */
417	417
418	418	outb(PRGMRST \| DOWNLOAD, host->base + ORC_RISCCTL); /* Reset program count 0 */
419		− bios_addr -= 0x1000; /* Reset the BIOS adddress */
	419	+ bios_addr -= 0x1000; /* Reset the BIOS address */
420	420	for (i = 0, data32_ptr = (u8 ) & data32; / Check the code */
421	421	i < 0x1000; /* Firmware code size = 4K */
422	422	i++, bios_addr++) {

drivers/scsi/aacraid/commsup.c+1−1

@@ -91,7 +91,7 @@ void aac_fib_map_free(struct aac_dev *dev) · 90 unmodified lines
91	91	* aac_fib_setup - setup the fibs
92	92	* @dev: Adapter to set up
93	93	*
94		− * Allocate the PCI space for the fibs, map it and then intialise the
	94	+ * Allocate the PCI space for the fibs, map it and then initialise the
95	95	* fib area, the unmapped fib data and also the free list
96	96	*/
97	97

drivers/scsi/aic7xxx_old/aic7xxx.seq+1−1

@@ -1178,7 +1178,7 @@ notFound: · 1177 unmodified lines
1178	1178	/*
1179	1179	* Retrieve an SCB by SCBID first searching the disconnected list falling
1180	1180	* back to DMA'ing the SCB down from the host. This routine assumes that
1181		− * ARG_1 is the SCBID of interrest and that SINDEX is the position in the
	1181	+ * ARG_1 is the SCBID of interest and that SINDEX is the position in the
1182	1182	* disconnected list to start the search from. If SINDEX is SCB_LIST_NULL,
1183	1183	* we go directly to the host for the SCB.
1184	1184	*/

drivers/scsi/aic94xx/aic94xx_reg_def.h+2−2

@@ -1689,7 +1689,7 @@ · 1688 unmodified lines
1689	1689	#define PHY_START_CAL 0x01
1690	1690
1691	1691	/*
1692		− * HST_PCIX2 Registers, Addresss Range: (0x00-0xFC)
	1692	+ * HST_PCIX2 Registers, Address Range: (0x00-0xFC)
1693	1693	*/
1694	1694	#define PCIX_REG_BASE_ADR 0xB8040000
1695	1695
@@ -1802,7 +1802,7 @@ · 106 unmodified lines
1802	1802	#define PCIC_TP_CTRL 0xFC
1803	1803
1804	1804	/*
1805		− * EXSI Registers, Addresss Range: (0x00-0xFC)
	1805	+ * EXSI Registers, Address Range: (0x00-0xFC)
1806	1806	*/
1807	1807	#define EXSI_REG_BASE_ADR REG_BASE_ADDR_EXSI
1808	1808

drivers/scsi/aic94xx/aic94xx_seq.c+3−3

@@ -797,7 +797,7 @@ static void asd_init_lseq_mdp(struct asd_ha_struct *asd_ha, int lseq) · 796 unmodified lines
797	797	int j;
798	798	/* Start from Page 1 of Mode 0 and 1. */
799	799	moffs = LSEQ_PAGE_SIZE + i*LSEQ_MODE_SCRATCH_SIZE;
800		− /* All the fields of page 1 can be intialized to 0. */
	800	+ /* All the fields of page 1 can be initialized to 0. */
801	801	for (j = 0; j < LSEQ_PAGE_SIZE; j += 4)
802	802	asd_write_reg_dword(asd_ha, LmSCRATCH(lseq)+moffs+j,0);
803	803	}
@@ -938,7 +938,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) · 134 unmodified lines
938	938	asd_write_reg_dword(asd_ha, SCBPRO, 0);
939	939	asd_write_reg_dword(asd_ha, CSEQCON, 0);
940	940
941		− /* Intialize CSEQ Mode 11 Interrupt Vectors.
	941	+ /* Initialize CSEQ Mode 11 Interrupt Vectors.
942	942	* The addresses are 16 bit wide and in dword units.
943	943	* The values of their macros are in byte units.
944	944	* Thus we have to divide by 4. */
@@ -961,7 +961,7 @@ static void asd_init_cseq_cio(struct asd_ha_struct *asd_ha) · 16 unmodified lines
961	961	asd_write_reg_word(asd_ha, CPRGMCNT, cseq_idle_loop);
962	962
963	963	for (i = 0; i < 8; i++) {
964		− /* Intialize Mode n Link m Interrupt Enable. */
	964	+ /* Initialize Mode n Link m Interrupt Enable. */
965	965	asd_write_reg_dword(asd_ha, CMnINTEN(i), EN_CMnRSPMBXF);
966	966	/* Initialize Mode n Request Mailbox. */
967	967	asd_write_reg_dword(asd_ha, CMnREQMBX(i), 0);

drivers/scsi/bfa/bfa_fcpim.c+1−1

@@ -2092,7 +2092,7 @@ bfa_ioim_sm_cleanup_qfull(struct bfa_ioim_s *ioim, enum bfa_ioim_event event) · 2091 unmodified lines
2092	2092
2093	2093	case BFA_IOIM_SM_ABORT:
2094	2094	/**
2095		− * IO is alraedy being cleaned up implicitly
	2095	+ * IO is already being cleaned up implicitly
2096	2096	*/
2097	2097	ioim->io_cbfn = __bfa_cb_ioim_abort;
2098	2098	break;

drivers/scsi/bfa/bfa_fcs_lport.c+1−1

@@ -5742,7 +5742,7 @@ bfa_cb_lps_fdisc_comp(void bfad, void uarg, bfa_status_t status) · 5741 unmodified lines
5742	5742	switch (status) {
5743	5743	case BFA_STATUS_OK:
5744	5744	/*
5745		− * Initialiaze the V-Port fields
	5745	+ * Initialize the V-Port fields
5746	5746	*/
5747	5747	__vport_fcid(vport) = bfa_lps_get_pid(vport->lps);
5748	5748	vport->vport_stats.fdisc_accepts++;

drivers/scsi/dc395x.c+4−4

@@ -3795,7 +3795,7 @@ static struct DeviceCtlBlk device_alloc(struct AdapterCtlBlk acb, · 3794 unmodified lines
3795	3795	* adapter_add_device - Adds the device instance to the adaptor instance.
3796	3796	*
3797	3797	* @acb: The adapter device to be updated
3798		− * @dcb: A newly created and intialised device instance to add.
	3798	+ * @dcb: A newly created and initialised device instance to add.
3799	3799	**/
3800	3800	static void adapter_add_device(struct AdapterCtlBlk *acb,
3801	3801	struct DeviceCtlBlk *dcb)
@@ -4497,7 +4497,7 @@ static void __devinit adapter_init_chip(struct AdapterCtlBlk *acb) · 695 unmodified lines
4497	4497	* init_adapter - Grab the resource for the card, setup the adapter
4498	4498	* information, set the card into a known state, create the various
4499	4499	* tables etc etc. This basically gets all adapter information all up
4500		− * to date, intialised and gets the chip in sync with it.
	4500	+ * to date, initialised and gets the chip in sync with it.
4501	4501	*
4502	4502	* @host: This hosts adapter structure
4503	4503	* @io_port: The base I/O port
@@ -4788,7 +4788,7 @@ static void banner_display(void) · 284 unmodified lines
4788	4788	* that it finds in the system. The pci_dev strcuture indicates which
4789	4789	* instance we are being called from.
4790	4790	*
4791		− * @dev: The PCI device to intialize.
	4791	+ * @dev: The PCI device to initialize.
4792	4792	* @id: Looks like a pointer to the entry in our pci device table
4793	4793	* that was actually matched by the PCI subsystem.
4794	4794	*
@@ -4859,7 +4859,7 @@ fail: · 64 unmodified lines
4859	4859	* dc395x_remove_one - Called to remove a single instance of the
4860	4860	* adapter.
4861	4861	*
4862		− * @dev: The PCI device to intialize.
	4862	+ * @dev: The PCI device to initialize.
4863	4863	**/
4864	4864	static void __devexit dc395x_remove_one(struct pci_dev *dev)
4865	4865	{

drivers/scsi/libfc/fc_fcp.c+1−1

@@ -1212,7 +1212,7 @@ static void fc_lun_reset_send(unsigned long data) · 1211 unmodified lines
1212	1212	/**
1213	1213	* fc_lun_reset() - Send a LUN RESET command to a device
1214	1214	* and wait for the reply
1215		− * @lport: The local port to sent the comand on
	1215	+ * @lport: The local port to sent the command on
1216	1216	* @fsp: The FCP packet that identifies the LUN to be reset
1217	1217	* @id: The SCSI command ID
1218	1218	* @lun: The LUN ID to be reset

drivers/scsi/lpfc/lpfc_attr.c+1−1

@@ -1339,7 +1339,7 @@ lpfc_##attr##_show(struct device dev, struct device_attribute attr, \ · 1338 unmodified lines
1339	1339	}
1340	1340
1341	1341	/**
1342		− * lpfc_param_init - Intializes a cfg attribute
	1342	+ * lpfc_param_init - Initializes a cfg attribute
1343	1343	*
1344	1344	* Description:
1345	1345	* Macro that given an attr e.g. hba_queue_depth expands

drivers/scsi/lpfc/lpfc_hbadisc.c+1−1

@@ -2614,7 +2614,7 @@ lpfc_mbx_process_link_up(struct lpfc_hba phba, READ_LA_VAR la) · 2613 unmodified lines
2614	2614	if (unlikely(!fcf_record)) {
2615	2615	lpfc_printf_log(phba, KERN_ERR,
2616	2616	LOG_MBOX \| LOG_SLI,
2617		− "2554 Could not allocate memmory for "
	2617	+ "2554 Could not allocate memory for "
2618	2618	"fcf record\n");
2619	2619	rc = -ENODEV;
2620	2620	goto out;

drivers/scsi/lpfc/lpfc_sli.c+1−1

@@ -9619,7 +9619,7 @@ lpfc_sli4_intr_handler(int irq, void *dev_id) · 9618 unmodified lines
9619	9619	* lpfc_sli4_queue_free - free a queue structure and associated memory
9620	9620	* @queue: The queue structure to free.
9621	9621	*
9622		− * This function frees a queue structure and the DMAable memeory used for
	9622	+ * This function frees a queue structure and the DMAable memory used for
9623	9623	* the host resident queue. This function must be called after destroying the
9624	9624	* queue on the HBA.
9625	9625	**/

drivers/scsi/megaraid.h+1−1

@@ -13,7 +13,7 @@ · 12 unmodified lines
13	13	*/
14	14
15	15	/*
16		− * Comand coalescing - This feature allows the driver to be able to combine
	16	+ * Command coalescing - This feature allows the driver to be able to combine
17	17	* two or more commands and issue as one command in order to boost I/O
18	18	* performance. Useful if the nature of the I/O is sequential. It is not very
19	19	* useful for random natured I/Os.

drivers/scsi/pm8001/pm8001_init.c+1−1

@@ -603,7 +603,7 @@ static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha) · 602 unmodified lines
603	603	#endif
604	604
605	605	intx:
606		− /* intialize the INT-X interrupt */
	606	+ /* initialize the INT-X interrupt */
607	607	rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
608	608	SHOST_TO_SAS_HA(pm8001_ha->shost));
609	609	return rc;

drivers/scsi/scsi_netlink.c+1−1

@@ -477,7 +477,7 @@ EXPORT_SYMBOL_GPL(scsi_nl_remove_driver); · 476 unmodified lines
477	477
478	478
479	479	/**
480		− * scsi_netlink_init - Called by SCSI subsystem to intialize
	480	+ * scsi_netlink_init - Called by SCSI subsystem to initialize
481	481	* the SCSI transport netlink interface
482	482	*
483	483	**/

drivers/scsi/sym53c8xx_2/sym_glue.c+1−1

@@ -1864,7 +1864,7 @@ static pci_ers_result_t sym2_io_slot_dump(struct pci_dev *pdev) · 1863 unmodified lines
1864	1864	*
1865	1865	* This routine is similar to sym_set_workarounds(), except
1866	1866	* that, at this point, we already know that the device was
1867		− * successfully intialized at least once before, and so most
	1867	+ * successfully initialized at least once before, and so most
1868	1868	* of the steps taken there are un-needed here.
1869	1869	*/
1870	1870	static void sym2_reset_workarounds(struct pci_dev *pdev)

drivers/spi/atmel_spi.c+2−2

@@ -341,9 +341,9 @@ static void atmel_spi_next_message(struct spi_master *master) · 340 unmodified lines
341	341	/*
342	342	* For DMA, tx_buf/tx_dma have the same relationship as rx_buf/rx_dma:
343	343	* - The buffer is either valid for CPU access, else NULL
344		− * - If the buffer is valid, so is its DMA addresss
	344	+ * - If the buffer is valid, so is its DMA address
345	345	*
346		− * This driver manages the dma addresss unless message->is_dma_mapped.
	346	+ * This driver manages the dma address unless message->is_dma_mapped.
347	347	*/
348	348	static int
349	349	atmel_spi_dma_map_xfer(struct atmel_spi as, struct spi_transfer xfer)

drivers/spi/spidev.c+1−1

@@ -38,7 +38,7 @@ · 37 unmodified lines
38	38
39	39
40	40	/*
41		− * This supports acccess to SPI devices using normal userspace I/O calls.
	41	+ * This supports access to SPI devices using normal userspace I/O calls.
42	42	* Note that while traditional UNIX/POSIX I/O semantics are half duplex,
43	43	* and often mask message boundaries, full SPI support requires full duplex
44	44	* transfers. There are several kinds of internal message boundaries to

drivers/staging/stradis/stradis.c+1−1

@@ -745,7 +745,7 @@ static void set_out_format(struct saa7146 *saa, int mode) · 744 unmodified lines
745	745	}
746	746	}
747	747
748		−/* Intialize bitmangler to map from a byte value to the mangled word that
	748	+/* Initialize bitmangler to map from a byte value to the mangled word that
749	749	* must be output to program the Xilinx part through the DEBI port.
750	750	* Xilinx Data Bit->DEBI Bit: 0->15 1->7 2->6 3->12 4->11 5->2 6->1 7->0
751	751	* transfer FPGA code, init IBM chip, transfer IBM microcode

drivers/usb/gadget/imx_udc.c+1−1

@@ -1316,7 +1316,7 @@ static struct imx_udc_struct controller = { · 1315 unmodified lines
1316	1316	};
1317	1317
1318	1318	/*******************************************************************************
1319		− * USB gadged driver functions
	1319	+ * USB gadget driver functions
1320	1320	*******************************************************************************
1321	1321	*/
1322	1322	int usb_gadget_probe_driver(struct usb_gadget_driver *driver,

drivers/usb/host/imx21-hcd.c+1−1

@@ -1658,7 +1658,7 @@ static int imx21_hc_reset(struct usb_hcd *hcd) · 1657 unmodified lines
1658	1658
1659	1659	spin_lock_irqsave(&imx21->lock, flags);
1660	1660
1661		− /* Reset the Host controler modules */
	1661	+ /* Reset the Host controller modules */
1662	1662	writel(USBOTG_RST_RSTCTRL \| USBOTG_RST_RSTRH \|
1663	1663	USBOTG_RST_RSTHSIE \| USBOTG_RST_RSTHC,
1664	1664	imx21->regs + USBOTG_RST_CTRL);

drivers/usb/host/oxu210hp-hcd.c+1−1

@@ -3094,7 +3094,7 @@ static int oxu_hub_status_data(struct usb_hcd hcd, char buf) · 3093 unmodified lines
3094	3094
3095	3095	/* Some boards (mostly VIA?) report bogus overcurrent indications,
3096	3096	* causing massive log spam unless we completely ignore them. It
3097		− * may be relevant that VIA VT8235 controlers, where PORT_POWER is
	3097	+ * may be relevant that VIA VT8235 controllers, where PORT_POWER is
3098	3098	* always set, seem to clear PORT_OCC and PORT_CSC when writing to
3099	3099	* PORT_POWER; that's surprising, but maybe within-spec.
3100	3100	*/

drivers/usb/misc/adutux.c+1−1

@@ -717,7 +717,7 @@ static int adu_probe(struct usb_interface *interface, · 716 unmodified lines
717	717	goto exit;
718	718	}
719	719
720		− /* allocate memory for our device state and intialize it */
	720	+ /* allocate memory for our device state and initialize it */
721	721	dev = kzalloc(sizeof(struct adu_device), GFP_KERNEL);
722	722	if (dev == NULL) {
723	723	dev_err(&interface->dev, "Out of memory\n");

drivers/usb/misc/iowarrior.c+1−1

@@ -768,7 +768,7 @@ static int iowarrior_probe(struct usb_interface *interface, · 767 unmodified lines
768	768	int i;
769	769	int retval = -ENOMEM;
770	770
771		− /* allocate memory for our device state and intialize it */
	771	+ /* allocate memory for our device state and initialize it */
772	772	dev = kzalloc(sizeof(struct iowarrior), GFP_KERNEL);
773	773	if (dev == NULL) {
774	774	dev_err(&interface->dev, "Out of memory\n");

drivers/usb/misc/ldusb.c+1−1

@@ -642,7 +642,7 @@ static int ld_usb_probe(struct usb_interface intf, const struct usb_device_id · 641 unmodified lines
642	642	int i;
643	643	int retval = -ENOMEM;
644	644
645		− /* allocate memory for our device state and intialize it */
	645	+ /* allocate memory for our device state and initialize it */
646	646
647	647	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
648	648	if (dev == NULL) {

drivers/usb/musb/musb_gadget.c+2−2

@@ -1636,7 +1636,7 @@ static inline void __init musb_g_init_endpoints(struct musb *musb) · 1635 unmodified lines
1636	1636	struct musb_hw_ep *hw_ep;
1637	1637	unsigned count = 0;
1638	1638
1639		− /* intialize endpoint list just once */
	1639	+ /* initialize endpoint list just once */
1640	1640	INIT_LIST_HEAD(&(musb->g.ep_list));
1641	1641
1642	1642	for (epnum = 0, hw_ep = musb->endpoints;
@@ -1715,7 +1715,7 @@ void musb_gadget_cleanup(struct musb *musb) · 72 unmodified lines
1715	1715	*
1716	1716	* -EINVAL something went wrong (not driver)
1717	1717	* -EBUSY another gadget is already using the controller
1718		− * -ENOMEM no memeory to perform the operation
	1718	+ * -ENOMEM no memory to perform the operation
1719	1719	*
1720	1720	* @param driver the gadget driver
1721	1721	* @param bind the driver's bind function

drivers/usb/wusbcore/wa-rpipe.c+1−1

@@ -49,7 +49,7 @@ · 48 unmodified lines
49	49	*
50	50	* USB Stack port number 4 (1 based)
51	51	* WUSB code port index 3 (0 based)
52		− * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub)
	52	+ * USB Address 5 (2 based -- 0 is for default, 1 for root hub)
53	53	*
54	54	* Now, because we don't use the concept as default address exactly
55	55	* like the (wired) USB code does, we need to kind of skip it. So we

drivers/video/sstfb.c+1−1

@@ -536,7 +536,7 @@ static int sstfb_set_par(struct fb_info *info) · 535 unmodified lines
536	536	fbiinit2 = sst_read(FBIINIT2);
537	537	fbiinit3 = sst_read(FBIINIT3);
538	538
539		− /* everything is reset. we enable fbiinit2/3 remap : dac acces ok */
	539	+ /* everything is reset. we enable fbiinit2/3 remap : dac access ok */
540	540	pci_write_config_dword(sst_dev, PCI_INIT_ENABLE,
541	541	PCI_EN_INIT_WR \| PCI_REMAP_DAC );
542	542

fs/ext4/ext4.h+1−1

@@ -577,7 +577,7 @@ struct ext4_mount_options { · 576 unmodified lines
577	577	#endif
578	578	};
579	579
580		−/* Max physical block we can addres w/o extents */
	580	+/* Max physical block we can address w/o extents */
581	581	#define EXT4_MAX_BLOCK_FILE_PHYS 0xFFFFFFFF
582	582
583	583	/*

fs/ext4/extents.c+2−2

@@ -2825,14 +2825,14 @@ fix_extent_len: · 2824 unmodified lines
2825	2825	* to an uninitialized extent.
2826	2826	*
2827	2827	* Writing to an uninitized extent may result in splitting the uninitialized
2828		− * extent into multiple /intialized unintialized extents (up to three)
	2828	+ * extent into multiple /initialized uninitialized extents (up to three)
2829	2829	* There are three possibilities:
2830	2830	* a> There is no split required: Entire extent should be uninitialized
2831	2831	* b> Splits in two extents: Write is happening at either end of the extent
2832	2832	* c> Splits in three extents: Somone is writing in middle of the extent
2833	2833	*
2834	2834	* One of more index blocks maybe needed if the extent tree grow after
2835		− * the unintialized extent split. To prevent ENOSPC occur at the IO
	2835	+ * the uninitialized extent split. To prevent ENOSPC occur at the IO
2836	2836	* complete, we need to split the uninitialized extent before DIO submit
2837	2837	* the IO. The uninitialized extent called at this time will be split
2838	2838	* into three uninitialized extent(at most). After IO complete, the part

fs/ext4/inode.c+2−2

@@ -3740,9 +3740,9 @@ retry: · 3739 unmodified lines
3740	3740	* preallocated extents, and those write extend the file, no need to
3741	3741	* fall back to buffered IO.
3742	3742	*
3743		− * For holes, we fallocate those blocks, mark them as unintialized
	3743	+ * For holes, we fallocate those blocks, mark them as uninitialized
3744	3744	* If those blocks were preallocated, we mark sure they are splited, but
3745		− * still keep the range to write as unintialized.
	3745	+ * still keep the range to write as uninitialized.
3746	3746	*
3747	3747	* The unwrritten extents will be converted to written when DIO is completed.
3748	3748	* For async direct IO, since the IO may still pending when return, we

fs/ocfs2/inode.c+1−1

@@ -434,7 +434,7 @@ static int ocfs2_read_locked_inode(struct inode *inode, · 433 unmodified lines
434	434	* #1 and #2 can be simply solved by never taking the lock
435	435	* here for system files (which are the only type we read
436	436	* during mount). It's a heavier approach, but our main
437		− * concern is user-accesible files anyway.
	437	+ * concern is user-accessible files anyway.
438	438	*
439	439	* #3 works itself out because we'll eventually take the
440	440	* cluster lock before trusting anything anyway.

fs/ocfs2/suballoc.c+1−1

@@ -1916,7 +1916,7 @@ static int ocfs2_claim_suballoc_bits(struct ocfs2_alloc_context *ac, · 1915 unmodified lines
1916	1916	if (res->sr_bg_blkno) {
1917	1917	/* Attempt to short-circuit the usual search mechanism
1918	1918	* by jumping straight to the most recently used
1919		− * allocation group. This helps us mantain some
	1919	+ * allocation group. This helps us maintain some
1920	1920	* contiguousness across allocations. */
1921	1921	status = ocfs2_search_one_group(ac, handle, bits_wanted,
1922	1922	min_bits, res, &bits_left);

fs/xfs/linux-2.6/xfs_super.c+1−1

@@ -938,7 +938,7 @@ out_reclaim: · 937 unmodified lines
938	938	* Slab object creation initialisation for the XFS inode.
939	939	* This covers only the idempotent fields in the XFS inode;
940	940	* all other fields need to be initialised on allocation
941		− * from the slab. This avoids the need to repeatedly intialise
	941	+ * from the slab. This avoids the need to repeatedly initialise
942	942	* fields in the xfs inode that left in the initialise state
943	943	* when freeing the inode.
944	944	*/

include/acpi/actbl1.h+1−1

@@ -119,7 +119,7 @@ struct acpi_whea_header { · 118 unmodified lines
119	119	struct acpi_table_bert {
120	120	struct acpi_table_header header; /* Common ACPI table header */
121	121	u32 region_length; /* Length of the boot error region */
122		− u64 address; /* Physical addresss of the error region */
	122	+ u64 address; /* Physical address of the error region */
123	123	};
124	124
125	125	/* Boot Error Region (not a subtable, pointed to by Address field above) */

include/linux/cgroup.h+1−1

@@ -564,7 +564,7 @@ struct cgroup_iter { · 563 unmodified lines
564	564	/*
565	565	* To iterate across the tasks in a cgroup:
566	566	*
567		− * 1) call cgroup_iter_start to intialize an iterator
	567	+ * 1) call cgroup_iter_start to initialize an iterator
568	568	*
569	569	* 2) call cgroup_iter_next() to retrieve member tasks until it
570	570	* returns NULL or until you want to end the iteration

include/linux/firewire-cdev.h+1−1

@@ -273,7 +273,7 @@ struct fw_cdev_event_iso_interrupt { · 272 unmodified lines
273	273	* @closure: See &fw_cdev_event_common;
274	274	* set by %FW_CDEV_CREATE_ISO_CONTEXT ioctl
275	275	* @type: %FW_CDEV_EVENT_ISO_INTERRUPT_MULTICHANNEL
276		− * @completed: Offset into the receive buffer; data before this offest is valid
	276	+ * @completed: Offset into the receive buffer; data before this offset is valid
277	277	*
278	278	* This event is sent in multichannel contexts (context type
279	279	* %FW_CDEV_ISO_CONTEXT_RECEIVE_MULTICHANNEL) for &fw_cdev_iso_packet buffer

include/linux/mfd/core.h+1−1

@@ -39,7 +39,7 @@ struct mfd_cell { · 38 unmodified lines
39	39	size_t data_size;
40	40
41	41	/*
42		− * This resources can be specified relatievly to the parent device.
	42	+ * This resources can be specified relatively to the parent device.
43	43	* For accessing device you should use resources from device
44	44	*/
45	45	int num_resources;

include/net/sctp/user.h+2−2

@@ -99,8 +99,8 @@ typedef __s32 sctp_assoc_t; · 98 unmodified lines
99	99	#define SCTP_SOCKOPT_PEELOFF 102 /* peel off association. */
100	100	/* Options 104-106 are deprecated and removed. Do not use this space */
101	101	#define SCTP_SOCKOPT_CONNECTX_OLD 107 /* CONNECTX old requests. */
102		−#define SCTP_GET_PEER_ADDRS 108 /* Get all peer addresss. */
103		−#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local addresss. */
	102	+#define SCTP_GET_PEER_ADDRS 108 /* Get all peer address. */
	103	+#define SCTP_GET_LOCAL_ADDRS 109 /* Get all local address. */
104	104	#define SCTP_SOCKOPT_CONNECTX 110 /* CONNECTX requests. */
105	105	#define SCTP_SOCKOPT_CONNECTX3 111 /* CONNECTX requests (updated) */
106	106

include/scsi/fc/fc_fcp.h+2−2

@@ -46,7 +46,7 @@ · 45 unmodified lines
46	46	*/
47	47	struct fcp_cmnd {
48	48	__u8 fc_lun[8]; /* logical unit number */
49		− __u8 fc_cmdref; /* commmand reference number */
	49	+ __u8 fc_cmdref; /* command reference number */
50	50	__u8 fc_pri_ta; /* priority and task attribute */
51	51	__u8 fc_tm_flags; /* task management flags */
52	52	__u8 fc_flags; /* additional len & flags */
@@ -58,7 +58,7 @@ struct fcp_cmnd { · 5 unmodified lines
58	58
59	59	struct fcp_cmnd32 {
60	60	__u8 fc_lun[8]; /* logical unit number */
61		− __u8 fc_cmdref; /* commmand reference number */
	61	+ __u8 fc_cmdref; /* command reference number */
62	62	__u8 fc_pri_ta; /* priority and task attribute */
63	63	__u8 fc_tm_flags; /* task management flags */
64	64	__u8 fc_flags; /* additional len & flags */

kernel/debug/kdb/kdb_main.c+1−1

@@ -2913,7 +2913,7 @@ static void __init kdb_cmd_init(void) · 2912 unmodified lines
2913	2913	}
2914	2914	}
2915	2915
2916		−/* Intialize kdb_printf, breakpoint tables and kdb state */
	2916	+/* Initialize kdb_printf, breakpoint tables and kdb state */
2917	2917	void __init kdb_init(int lvl)
2918	2918	{
2919	2919	static int kdb_init_lvl = KDB_NOT_INITIALIZED;

kernel/kexec.c+1−1

@@ -163,7 +163,7 @@ static int do_kimage_alloc(struct kimage **rimage, unsigned long entry, · 162 unmodified lines
163	163	* just verifies it is an address we can use.
164	164	*
165	165	* Since the kernel does everything in page size chunks ensure
166		− * the destination addreses are page aligned. Too many
	166	+ * the destination addresses are page aligned. Too many
167	167	* special cases crop of when we don't do this. The most
168	168	* insidious is getting overlapping destination addresses
169	169	* simply because addresses are changed to page size

kernel/power/swap.c+1−1

@@ -865,7 +865,7 @@ out_finish: · 864 unmodified lines
865	865	/**
866	866	* swsusp_read - read the hibernation image.
867	867	* @flags_p: flags passed by the "frozen" kernel in the image header should
868		− * be written into this memeory location
	868	+ * be written into this memory location
869	869	*/
870	870
871	871	int swsusp_read(unsigned int *flags_p)

kernel/sched.c+1−1

@@ -2568,7 +2568,7 @@ out: · 2567 unmodified lines
2568	2568	* try_to_wake_up_local - try to wake up a local task with rq lock held
2569	2569	* @p: the thread to be awakened
2570	2570	*
2571		− * Put @p on the run-queue if it's not alredy there. The caller must
	2571	+ * Put @p on the run-queue if it's not already there. The caller must
2572	2572	* ensure that this_rq() is locked, @p is bound to this_rq() and not
2573	2573	* the current task. this_rq() stays locked over invocation.
2574	2574	*/

kernel/sysctl_binary.c+1−1

@@ -1193,7 +1193,7 @@ static ssize_t bin_dn_node_address(struct file *file, · 1192 unmodified lines
1193	1193
1194	1194	buf[result] = '\0';
1195	1195
1196		− /* Convert the decnet addresss to binary */
	1196	+ /* Convert the decnet address to binary */
1197	1197	result = -EIO;
1198	1198	nodep = strchr(buf, '.') + 1;
1199	1199	if (!nodep)

kernel/time/clocksource.c+1−1

@@ -678,7 +678,7 @@ EXPORT_SYMBOL_GPL(__clocksource_updatefreq_scale); · 677 unmodified lines
678	678	int __clocksource_register_scale(struct clocksource *cs, u32 scale, u32 freq)
679	679	{
680	680
681		− /* Intialize mult/shift and max_idle_ns */
	681	+ /* Initialize mult/shift and max_idle_ns */
682	682	__clocksource_updatefreq_scale(cs, scale, freq);
683	683
684	684	/* Add clocksource to the clcoksource list */

kernel/trace/trace_entries.h+1−1

@@ -53,7 +53,7 @@ · 52 unmodified lines
53	53	*/
54	54
55	55	/*
56		− * Function trace entry - function address and parent function addres:
	56	+ * Function trace entry - function address and parent function address:
57	57	*/
58	58	FTRACE_ENTRY(function, ftrace_entry,
59	59

lib/nlattr.c+1−1

@@ -167,7 +167,7 @@ nla_policy_len(const struct nla_policy *p, int n) · 166 unmodified lines
167	167	* @policy: validation policy
168	168	*
169	169	* Parses a stream of attributes and stores a pointer to each attribute in
170		− * the tb array accessable via the attribute type. Attributes with a type
	170	+ * the tb array accessible via the attribute type. Attributes with a type
171	171	* exceeding maxtype will be silently ignored for backwards compatibility
172	172	* reasons. policy may be set to NULL if no validation is required.
173	173	*

lib/swiotlb.c+1−1

@@ -60,7 +60,7 @@ int swiotlb_force; · 59 unmodified lines
60	60	static char io_tlb_start, io_tlb_end;
61	61
62	62	/*
63		− * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and
	63	+ * The number of IO TLB blocks (in groups of 64) between io_tlb_start and
64	64	* io_tlb_end. This is command line adjustable via setup_io_tlb_npages.
65	65	*/
66	66	static unsigned long io_tlb_nslabs;

mm/percpu.c+1−1

@@ -258,7 +258,7 @@ static void __maybe_unused pcpu_next_pop(struct pcpu_chunk *chunk, · 257 unmodified lines
258	258
259	259	/*
260	260	* (Un)populated page region iterators. Iterate over (un)populated
261		− * page regions betwen @start and @end in @chunk. @rs and @re should
	261	+ * page regions between @start and @end in @chunk. @rs and @re should
262	262	* be integer variables and will be set to start and end page index of
263	263	* the current region.
264	264	*/

mm/sparse-vmemmap.c+1−1

@@ -9,7 +9,7 @@ · 8 unmodified lines
9	9	*
10	10	* However, virtual mappings need a page table and TLBs. Many Linux
11	11	* architectures already map their physical space using 1-1 mappings
12		− * via TLBs. For those arches the virtual memmory map is essentially
	12	+ * via TLBs. For those arches the virtual memory map is essentially
13	13	* for free if we use the same page size as the 1-1 mappings. In that
14	14	* case the overhead consists of a few additional pages that are
15	15	* allocated to create a view of memory for vmemmap.

net/core/dev.c+1−1

@@ -6096,7 +6096,7 @@ static void __net_exit default_device_exit(struct net *net) · 6095 unmodified lines
6096	6096	static void __net_exit default_device_exit_batch(struct list_head *net_list)
6097	6097	{
6098	6098	/* At exit all network devices most be removed from a network
6099		− * namespace. Do this in the reverse order of registeration.
	6099	+ * namespace. Do this in the reverse order of registration.
6100	6100	* Do this across as many network namespaces as possible to
6101	6101	* improve batching efficiency.
6102	6102	*/

net/decnet/dn_dev.c+1−1

@@ -1112,7 +1112,7 @@ static struct dn_dev dn_dev_create(struct net_device dev, int *err) · 1111 unmodified lines
1112	1112	/*
1113	1113	* This processes a device up event. We only start up
1114	1114	* the loopback device & ethernet devices with correct
1115		− * MAC addreses automatically. Others must be started
	1115	+ * MAC addresses automatically. Others must be started
1116	1116	* specifically.
1117	1117	*
1118	1118	* FIXME: How should we configure the loopback address ? If we could dispense

net/ipv4/tcp_output.c+1−1

@@ -1336,7 +1336,7 @@ static inline unsigned int tcp_cwnd_test(struct tcp_sock *tp, · 1335 unmodified lines
1336	1336	return 0;
1337	1337	}
1338	1338
1339		−/* Intialize TSO state of a skb.
	1339	+/* Initialize TSO state of a skb.
1340	1340	* This must be invoked the first time we consider transmitting
1341	1341	* SKB onto the wire.
1342	1342	*/

scripts/kconfig/confdata.c+1−1

@@ -946,7 +946,7 @@ static void randomize_choice_values(struct symbol *csym) · 945 unmodified lines
946	946	int cnt, def;
947	947
948	948	/*
949		− * If choice is mod then we may have more items slected
	949	+ * If choice is mod then we may have more items selected
950	950	* and if no then no-one.
951	951	* In both cases stop.
952	952	*/

scripts/mod/modpost.c+1−1

@@ -1614,7 +1614,7 @@ static void section_rel(const char modname, struct elf_info elf, · 1613 unmodified lines
1614	1614	* A module includes a number of sections that are discarded
1615	1615	* either when loaded or when used as built-in.
1616	1616	* For loaded modules all functions marked __init and all data
1617		− * marked __initdata will be discarded when the module has been intialized.
	1617	+ * marked __initdata will be discarded when the module has been initialized.
1618	1618	* Likewise for modules used built-in the sections marked __exit
1619	1619	* are discarded because __exit marked function are supposed to be called
1620	1620	* only when a module is unloaded which never happens for built-in modules.

security/apparmor/include/match.h+1−1

@@ -27,7 +27,7 @@ · 26 unmodified lines
27	27	* The format used for transition tables is based on the GNU flex table
28	28	* file format (--tables-file option; see Table File Format in the flex
29	29	* info pages and the flex sources for documentation). The magic number
30		− * used in the header is 0x1B5E783D insted of 0xF13C57B1 though, because
	30	+ * used in the header is 0x1B5E783D instead of 0xF13C57B1 though, because
31	31	* the YY_ID_CHK (check) and YY_ID_DEF (default) tables are used
32	32	* slightly differently (see the apparmor-parser package).
33	33	*/

sound/core/init.c+1−1

@@ -642,7 +642,7 @@ static struct device_attribute card_number_attrs = · 641 unmodified lines
642	642	* external accesses. Thus, you should call this function at the end
643	643	* of the initialization of the card.
644	644	*
645		− * Returns zero otherwise a negative error code if the registrain failed.
	645	+ * Returns zero otherwise a negative error code if the registration failed.
646	646	*/
647	647	int snd_card_register(struct snd_card *card)
648	648	{

sound/core/pcm_native.c+1−1

@@ -985,7 +985,7 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push) · 984 unmodified lines
985	985	if (push)
986	986	snd_pcm_update_hw_ptr(substream);
987	987	/* The jiffies check in snd_pcm_update_hw_ptr*() is done by
988		− * a delta betwen the current jiffies, this gives a large enough
	988	+ * a delta between the current jiffies, this gives a large enough
989	989	* delta, effectively to skip the check once.
990	990	*/
991	991	substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;

sound/isa/opl3sa2.c+1−1

@@ -264,7 +264,7 @@ static int __devinit snd_opl3sa2_detect(struct snd_card *card) · 263 unmodified lines
264	264	snd_printd("OPL3-SA [0x%lx] detect (1) = 0x%x (0x%x)\n", port, tmp, tmp1);
265	265	return -ENODEV;
266	266	}
267		− /* try if the MIC register is accesible */
	267	+ /* try if the MIC register is accessible */
268	268	tmp = snd_opl3sa2_read(chip, OPL3SA2_MIC);
269	269	snd_opl3sa2_write(chip, OPL3SA2_MIC, 0x8a);
270	270	if (((tmp1 = snd_opl3sa2_read(chip, OPL3SA2_MIC)) & 0x9f) != 0x8a) {

sound/pci/ca0106/ca0106.h+1−1

@@ -188,7 +188,7 @@ · 187 unmodified lines
188	188	#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
189	189	/* PTR[5:0], Default: 0x0 */
190	190	#define PLAYBACK_UNKNOWN3 0x03 /* Not used ?? */
191		−#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
	191	+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
192	192	/* DMA[31:0], Default: 0x0 */
193	193	#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
194	194	/* SIZE[31:16], Default: 0x0 */

sound/pci/emu10k1/emu10k1x.c+1−1

@@ -114,7 +114,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard."); · 113 unmodified lines
114	114	*/
115	115	#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
116	116	#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
117		−#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
	117	+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
118	118	#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size */
119	119	#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Sample currently in DAC */
120	120	#define PLAYBACK_UNKNOWN1 0x07

sound/pci/emu10k1/p16v.h+1−1

@@ -96,7 +96,7 @@ · 95 unmodified lines
96	96	#define PLAYBACK_LIST_SIZE 0x01 /* Size of list in bytes << 16. E.g. 8 periods -> 0x00380000 */
97	97	#define PLAYBACK_LIST_PTR 0x02 /* Pointer to the current period being played */
98	98	#define PLAYBACK_UNKNOWN3 0x03 /* Not used */
99		−#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA addresss */
	99	+#define PLAYBACK_DMA_ADDR 0x04 /* Playback DMA address */
100	100	#define PLAYBACK_PERIOD_SIZE 0x05 /* Playback period size. win2000 uses 0x04000000 */
101	101	#define PLAYBACK_POINTER 0x06 /* Playback period pointer. Used with PLAYBACK_LIST_PTR to determine buffer position currently in DAC */
102	102	#define PLAYBACK_FIFO_END_ADDRESS 0x07 /* Playback FIFO end address */

sound/pci/es1968.c+1−1

@@ -220,7 +220,7 @@ MODULE_PARM_DESC(joystick, "Enable joystick."); · 219 unmodified lines
220	220	#define RINGB_EN_2CODEC 0x0020
221	221	#define RINGB_SING_BIT_DUAL 0x0040
222	222
223		−/* **Port Adresses** */
	223	+/* **Port Addresses** */
224	224
225	225	/* Write & Read */
226	226	#define ESM_INDEX 0x02

sound/pci/rme9652/hdspm.c+3−3

@@ -487,7 +487,7 @@ struct hdspm { · 486 unmodified lines
487	487	struct snd_kcontrol *playback_mixer_ctls[HDSPM_MAX_CHANNELS];
488	488	/* but input to much, so not used */
489	489	struct snd_kcontrol *input_mixer_ctls[HDSPM_MAX_CHANNELS];
490		− /* full mixer accessable over mixer ioctl or hwdep-device */
	490	+ /* full mixer accessible over mixer ioctl or hwdep-device */
491	491	struct hdspm_mixer *mixer;
492	492
493	493	};
@@ -550,7 +550,7 @@ static inline int HDSPM_bit2freq(int n) · 56 unmodified lines
550	550	return bit2freq_tab[n];
551	551	}
552	552
553		−/* Write/read to/from HDSPM with Adresses in Bytes
	553	+/* Write/read to/from HDSPM with Addresses in Bytes
554	554	not words but only 32Bit writes are allowed */
555	555
556	556	static inline void hdspm_write(struct hdspm * hdspm, unsigned int reg,
@@ -2908,7 +2908,7 @@ static int snd_hdspm_create_controls(struct snd_card card, struct hdspm hdspm · 2351 unmodified lines
2908	2908
2909	2909	/* Channel playback mixer as default control
2910	2910	Note: the whole matrix would be 128*HDSPM_MIXER_CHANNELS Faders,
2911		− thats too * big for any alsamixer they are accesible via special
	2911	+ thats too * big for any alsamixer they are accessible via special
2912	2912	IOCTL on hwdep and the mixer 2dimensional mixer control
2913	2913	*/
2914	2914

sound/soc/codecs/max98088.c+1−1

@@ -1953,7 +1953,7 @@ static int max98088_probe(struct snd_soc_codec *codec) · 1952 unmodified lines
1953	1953	return ret;
1954	1954	}
1955	1955
1956		− /* initalize private data */
	1956	+ /* initialize private data */
1957	1957
1958	1958	max98088->sysclk = (unsigned)-1;
1959	1959	max98088->eq_textcnt = 0;

sound/soc/s3c24xx/smdk_spdif.c+3−3

@@ -61,7 +61,7 @@ static int set_audio_clock_heirachy(struct platform_device *pdev) · 60 unmodified lines
61	61	goto out3;
62	62	}
63	63
64		− /* Set audio clock heirachy for S/PDIF */
	64	+ /* Set audio clock hierarchy for S/PDIF */
65	65	clk_set_parent(mout_epll, fout_epll);
66	66	clk_set_parent(sclk_audio0, mout_epll);
67	67	clk_set_parent(sclk_spdif, sclk_audio0);
@@ -79,7 +79,7 @@ out1: · 11 unmodified lines
79	79
80	80	/* We should haved to set clock directly on this part because of clock
81	81	* scheme of Samsudng SoCs did not support to set rates from abstrct
82		− * clock of it's heirachy.
	82	+ * clock of it's hierarchy.
83	83	*/
84	84	static int set_audio_clock_rate(unsigned long epll_rate,
85	85	unsigned long audio_rate)
@@ -197,7 +197,7 @@ static int __init smdk_init(void) · 111 unmodified lines
197	197	if (ret)
198	198	goto err1;
199	199
200		− /* Set audio clock heirachy manually */
	200	+ /* Set audio clock hierarchy manually */
201	201	ret = set_audio_clock_heirachy(smdk_snd_spdif_device);
202	202	if (ret)
203	203	goto err1;