These bindings support the GPIO controllers found on the Qualcomm Atheros AR7xxx/AR9XXX SoC.
Unified · Split
| @@ -0,0 +1,38 @@ | ||
| 1 | +Binding for Qualcomm Atheros AR7xxx/AR9xxx GPIO controller | |
| 2 | + | |
| 3 | +Required properties: | |
| 4 | +- compatible: has to be "qca,<soctype>-gpio" and one of the following | |
| 5 | + fallbacks: | |
| 6 | + - "qca,ar7100-gpio" | |
| 7 | + - "qca,ar9340-gpio" | |
| 8 | +- reg: Base address and size of the controllers memory area | |
| 9 | +- gpio-controller : Marks the device node as a GPIO controller. | |
| 10 | +- #gpio-cells : Should be two. The first cell is the pin number and the | |
| 11 | + second cell is used to specify optional parameters. | |
| 12 | +- ngpios: Should be set to the number of GPIOs available on the SoC. | |
| 13 | + | |
| 14 | +Optional properties: | |
| 15 | +- interrupt-parent: phandle of the parent interrupt controller. | |
| 16 | +- interrupts: Interrupt specifier for the controllers interrupt. | |
| 17 | +- interrupt-controller : Identifies the node as an interrupt controller | |
| 18 | +- #interrupt-cells : Specifies the number of cells needed to encode interrupt | |
| 19 | + source, should be 2 | |
| 20 | + | |
| 21 | +Please refer to interrupts.txt in this directory for details of the common | |
| 22 | +Interrupt Controllers bindings used by client devices. | |
| 23 | + | |
| 24 | +Example: | |
| 25 | + | |
| 26 | + gpio@18040000 { | |
| 27 | + compatible = "qca,ar9132-gpio", "qca,ar7100-gpio"; | |
| 28 | + reg = <0x18040000 0x30>; | |
| 29 | + interrupts = <2>; | |
| 30 | + | |
| 31 | + ngpios = <22>; | |
| 32 | + | |
| 33 | + gpio-controller; | |
| 34 | + #gpio-cells = <2>; | |
| 35 | + | |
| 36 | + interrupt-controller; | |
| 37 | + #interrupt-cells = <2>; | |
| 38 | + }; | |