| @@ -1,268 +0,0 @@ |
| 1 | | −// SPDX-License-Identifier: GPL-2.0-or-later |
| 2 | | −/* |
| 3 | | − * Touchkey driver for MELFAS MCS5000/5080 controller |
| 4 | | − * |
| 5 | | − * Copyright (C) 2010 Samsung Electronics Co.Ltd |
| 6 | | − * Author: HeungJun Kim <riverful.kim@samsung.com> |
| 7 | | − * Author: Joonyoung Shim <jy0922.shim@samsung.com> |
| 8 | | − */ |
| 9 | | − |
| 10 | | −#include <linux/module.h> |
| 11 | | −#include <linux/i2c.h> |
| 12 | | −#include <linux/interrupt.h> |
| 13 | | −#include <linux/input.h> |
| 14 | | −#include <linux/irq.h> |
| 15 | | −#include <linux/slab.h> |
| 16 | | −#include <linux/platform_data/mcs.h> |
| 17 | | −#include <linux/pm.h> |
| 18 | | − |
| 19 | | −/* MCS5000 Touchkey */ |
| 20 | | −#define MCS5000_TOUCHKEY_STATUS 0x04 |
| 21 | | −#define MCS5000_TOUCHKEY_STATUS_PRESS 7 |
| 22 | | −#define MCS5000_TOUCHKEY_FW 0x0a |
| 23 | | −#define MCS5000_TOUCHKEY_BASE_VAL 0x61 |
| 24 | | − |
| 25 | | −/* MCS5080 Touchkey */ |
| 26 | | −#define MCS5080_TOUCHKEY_STATUS 0x00 |
| 27 | | −#define MCS5080_TOUCHKEY_STATUS_PRESS 3 |
| 28 | | −#define MCS5080_TOUCHKEY_FW 0x01 |
| 29 | | −#define MCS5080_TOUCHKEY_BASE_VAL 0x1 |
| 30 | | − |
| 31 | | −enum mcs_touchkey_type { |
| 32 | | − MCS5000_TOUCHKEY, |
| 33 | | − MCS5080_TOUCHKEY, |
| 34 | | −}; |
| 35 | | − |
| 36 | | −struct mcs_touchkey_chip { |
| 37 | | − unsigned int status_reg; |
| 38 | | − unsigned int pressbit; |
| 39 | | − unsigned int press_invert; |
| 40 | | − unsigned int baseval; |
| 41 | | −}; |
| 42 | | − |
| 43 | | −struct mcs_touchkey_data { |
| 44 | | − void (*poweron)(bool); |
| 45 | | − |
| 46 | | − struct i2c_client *client; |
| 47 | | − struct input_dev *input_dev; |
| 48 | | − struct mcs_touchkey_chip chip; |
| 49 | | − unsigned int key_code; |
| 50 | | − unsigned int key_val; |
| 51 | | − unsigned short keycodes[]; |
| 52 | | −}; |
| 53 | | − |
| 54 | | −static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) |
| 55 | | −{ |
| 56 | | − struct mcs_touchkey_data *data = dev_id; |
| 57 | | − struct mcs_touchkey_chip *chip = &data->chip; |
| 58 | | − struct i2c_client *client = data->client; |
| 59 | | − struct input_dev *input = data->input_dev; |
| 60 | | − unsigned int key_val; |
| 61 | | − unsigned int pressed; |
| 62 | | − int val; |
| 63 | | − |
| 64 | | − val = i2c_smbus_read_byte_data(client, chip->status_reg); |
| 65 | | − if (val < 0) { |
| 66 | | − dev_err(&client->dev, "i2c read error [%d]\n", val); |
| 67 | | − goto out; |
| 68 | | − } |
| 69 | | − |
| 70 | | − pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; |
| 71 | | − if (chip->press_invert) |
| 72 | | − pressed ^= chip->press_invert; |
| 73 | | − |
| 74 | | − /* key_val is 0 when released, so we should use key_val of press. */ |
| 75 | | − if (pressed) { |
| 76 | | − key_val = val & (0xff >> (8 - chip->pressbit)); |
| 77 | | − if (!key_val) |
| 78 | | − goto out; |
| 79 | | − key_val -= chip->baseval; |
| 80 | | − data->key_code = data->keycodes[key_val]; |
| 81 | | − data->key_val = key_val; |
| 82 | | − } |
| 83 | | − |
| 84 | | − input_event(input, EV_MSC, MSC_SCAN, data->key_val); |
| 85 | | − input_report_key(input, data->key_code, pressed); |
| 86 | | − input_sync(input); |
| 87 | | − |
| 88 | | − dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, |
| 89 | | − pressed ? "pressed" : "released"); |
| 90 | | − |
| 91 | | − out: |
| 92 | | − return IRQ_HANDLED; |
| 93 | | −} |
| 94 | | − |
| 95 | | −static void mcs_touchkey_poweroff(void *data) |
| 96 | | −{ |
| 97 | | − struct mcs_touchkey_data *touchkey = data; |
| 98 | | − |
| 99 | | − touchkey->poweron(false); |
| 100 | | −} |
| 101 | | − |
| 102 | | −static int mcs_touchkey_probe(struct i2c_client *client) |
| 103 | | −{ |
| 104 | | − const struct i2c_device_id *id = i2c_client_get_device_id(client); |
| 105 | | − const struct mcs_platform_data *pdata; |
| 106 | | − struct mcs_touchkey_data *data; |
| 107 | | − struct input_dev *input_dev; |
| 108 | | − unsigned int fw_reg; |
| 109 | | − int fw_ver; |
| 110 | | − int error; |
| 111 | | − int i; |
| 112 | | − |
| 113 | | − pdata = dev_get_platdata(&client->dev); |
| 114 | | − if (!pdata) { |
| 115 | | − dev_err(&client->dev, "no platform data defined\n"); |
| 116 | | − return -EINVAL; |
| 117 | | − } |
| 118 | | − |
| 119 | | − data = devm_kzalloc(&client->dev, |
| 120 | | − struct_size(data, keycodes, pdata->key_maxval + 1), |
| 121 | | − GFP_KERNEL); |
| 122 | | − if (!data) |
| 123 | | − return -ENOMEM; |
| 124 | | − |
| 125 | | − input_dev = devm_input_allocate_device(&client->dev); |
| 126 | | − if (!input_dev) { |
| 127 | | − dev_err(&client->dev, "Failed to allocate input device\n"); |
| 128 | | − return -ENOMEM; |
| 129 | | − } |
| 130 | | − |
| 131 | | − data->client = client; |
| 132 | | − data->input_dev = input_dev; |
| 133 | | − |
| 134 | | − if (id->driver_data == MCS5000_TOUCHKEY) { |
| 135 | | − data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; |
| 136 | | − data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; |
| 137 | | − data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; |
| 138 | | − fw_reg = MCS5000_TOUCHKEY_FW; |
| 139 | | − } else { |
| 140 | | − data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; |
| 141 | | − data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; |
| 142 | | − data->chip.press_invert = 1; |
| 143 | | − data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; |
| 144 | | − fw_reg = MCS5080_TOUCHKEY_FW; |
| 145 | | − } |
| 146 | | − |
| 147 | | − fw_ver = i2c_smbus_read_byte_data(client, fw_reg); |
| 148 | | − if (fw_ver < 0) { |
| 149 | | − dev_err(&client->dev, "i2c read error[%d]\n", fw_ver); |
| 150 | | − return fw_ver; |
| 151 | | − } |
| 152 | | − dev_info(&client->dev, "Firmware version: %d\n", fw_ver); |
| 153 | | − |
| 154 | | − input_dev->name = "MELFAS MCS Touchkey"; |
| 155 | | − input_dev->id.bustype = BUS_I2C; |
| 156 | | − input_dev->evbit[0] = BIT_MASK(EV_KEY); |
| 157 | | − if (!pdata->no_autorepeat) |
| 158 | | − input_dev->evbit[0] |= BIT_MASK(EV_REP); |
| 159 | | − input_dev->keycode = data->keycodes; |
| 160 | | − input_dev->keycodesize = sizeof(data->keycodes[0]); |
| 161 | | − input_dev->keycodemax = pdata->key_maxval + 1; |
| 162 | | − |
| 163 | | − for (i = 0; i < pdata->keymap_size; i++) { |
| 164 | | − unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); |
| 165 | | − unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); |
| 166 | | − |
| 167 | | − data->keycodes[val] = code; |
| 168 | | − __set_bit(code, input_dev->keybit); |
| 169 | | − } |
| 170 | | − |
| 171 | | − input_set_capability(input_dev, EV_MSC, MSC_SCAN); |
| 172 | | − input_set_drvdata(input_dev, data); |
| 173 | | − |
| 174 | | − if (pdata->cfg_pin) |
| 175 | | − pdata->cfg_pin(); |
| 176 | | − |
| 177 | | − if (pdata->poweron) { |
| 178 | | − data->poweron = pdata->poweron; |
| 179 | | − data->poweron(true); |
| 180 | | − |
| 181 | | − error = devm_add_action_or_reset(&client->dev, |
| 182 | | − mcs_touchkey_poweroff, data); |
| 183 | | − if (error) |
| 184 | | − return error; |
| 185 | | − } |
| 186 | | − |
| 187 | | − error = devm_request_threaded_irq(&client->dev, client->irq, |
| 188 | | − NULL, mcs_touchkey_interrupt, |
| 189 | | − IRQF_TRIGGER_FALLING | IRQF_ONESHOT, |
| 190 | | − client->dev.driver->name, data); |
| 191 | | − if (error) { |
| 192 | | − dev_err(&client->dev, "Failed to register interrupt\n"); |
| 193 | | − return error; |
| 194 | | − } |
| 195 | | − |
| 196 | | − error = input_register_device(input_dev); |
| 197 | | − if (error) |
| 198 | | − return error; |
| 199 | | − |
| 200 | | − i2c_set_clientdata(client, data); |
| 201 | | − return 0; |
| 202 | | −} |
| 203 | | − |
| 204 | | −static void mcs_touchkey_shutdown(struct i2c_client *client) |
| 205 | | −{ |
| 206 | | − struct mcs_touchkey_data *data = i2c_get_clientdata(client); |
| 207 | | − |
| 208 | | − if (data->poweron) |
| 209 | | − data->poweron(false); |
| 210 | | −} |
| 211 | | − |
| 212 | | −static int mcs_touchkey_suspend(struct device *dev) |
| 213 | | −{ |
| 214 | | − struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| 215 | | − struct i2c_client *client = data->client; |
| 216 | | − |
| 217 | | − /* Disable the work */ |
| 218 | | − disable_irq(client->irq); |
| 219 | | − |
| 220 | | − /* Finally turn off the power */ |
| 221 | | − if (data->poweron) |
| 222 | | − data->poweron(false); |
| 223 | | − |
| 224 | | − return 0; |
| 225 | | −} |
| 226 | | − |
| 227 | | −static int mcs_touchkey_resume(struct device *dev) |
| 228 | | −{ |
| 229 | | − struct mcs_touchkey_data *data = dev_get_drvdata(dev); |
| 230 | | − struct i2c_client *client = data->client; |
| 231 | | − |
| 232 | | − /* Enable the device first */ |
| 233 | | − if (data->poweron) |
| 234 | | − data->poweron(true); |
| 235 | | − |
| 236 | | − /* Enable irq again */ |
| 237 | | − enable_irq(client->irq); |
| 238 | | − |
| 239 | | − return 0; |
| 240 | | −} |
| 241 | | − |
| 242 | | −static DEFINE_SIMPLE_DEV_PM_OPS(mcs_touchkey_pm_ops, |
| 243 | | − mcs_touchkey_suspend, mcs_touchkey_resume); |
| 244 | | − |
| 245 | | −static const struct i2c_device_id mcs_touchkey_id[] = { |
| 246 | | − { "mcs5000_touchkey", MCS5000_TOUCHKEY }, |
| 247 | | − { "mcs5080_touchkey", MCS5080_TOUCHKEY }, |
| 248 | | − { } |
| 249 | | −}; |
| 250 | | −MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); |
| 251 | | − |
| 252 | | −static struct i2c_driver mcs_touchkey_driver = { |
| 253 | | − .driver = { |
| 254 | | − .name = "mcs_touchkey", |
| 255 | | − .pm = pm_sleep_ptr(&mcs_touchkey_pm_ops), |
| 256 | | − }, |
| 257 | | − .probe = mcs_touchkey_probe, |
| 258 | | − .shutdown = mcs_touchkey_shutdown, |
| 259 | | − .id_table = mcs_touchkey_id, |
| 260 | | −}; |
| 261 | | − |
| 262 | | −module_i2c_driver(mcs_touchkey_driver); |
| 263 | | − |
| 264 | | −/* Module information */ |
| 265 | | −MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); |
| 266 | | −MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); |
| 267 | | −MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); |
| 268 | | −MODULE_LICENSE("GPL"); |