/*  * This file is part of the UCB release of Plan 9. It is subject to the license * terms in the LICENSE file found in the top-level directory of this * distribution and at http://akaros.cs.berkeley.edu/files/Plan9License. No * part of the UCB release of Plan 9, including this file, may be copied, * modified, propagated, or distributed except according to the terms contained * in the LICENSE file. */ #include	"all.h" char	*errstr9p[MAXERR] ={	[Ebadspc]	"attach -- bad specifier",	[Efid]		"unknown fid",	[Echar]		"bad character in directory name",	[Eopen]		"read/write -- on non open fid",	[Ecount]	"read/write -- count too big",	[Ealloc]	"phase error -- directory entry not allocated",	[Eqid]		"phase error -- qid does not match",	[Eaccess]	"access permission denied",	[Eentry]	"directory entry not found",	[Emode]		"open/create -- unknown mode",	[Edir1]		"walk -- in a non-directory",	[Edir2]		"create -- in a non-directory",	[Ephase]	"phase error -- cannot happen",	[Eexist]	"create/wstat -- file exists",	[Edot]		"create/wstat -- . and .. illegal names",	[Eempty]	"remove -- directory not empty",	[Ebadu]		"attach -- unknown user or failed authentication",	[Enoattach]	"attach -- system maintenance",	[Ewstatb]	"wstat -- unknown bits in qid.type/mode",	[Ewstatd]	"wstat -- attempt to change directory",	[Ewstatg]	"wstat -- not in group",	[Ewstatl]	"wstat -- attempt to make length negative",	[Ewstatm]	"wstat -- attempt to change muid",	[Ewstato]	"wstat -- not owner or group leader",	[Ewstatp]	"wstat -- attempt to change qid.path",	[Ewstatq]	"wstat -- qid.type/dir.mode mismatch",	[Ewstatu]	"wstat -- not owner",	[Ewstatv]	"wstat -- attempt to change qid.vers",	[Ename]		"create/wstat -- bad character in file name",	[Ewalk]		"walk -- too many (system wide)",	[Eronly]	"file system read only",	[Efull]		"file system full",	[Eoffset]	"read/write -- offset negative",	[Elocked]	"open/create -- file is locked",	[Ebroken]	"read/write -- lock is broken",	[Eauth]		"attach -- authentication failed",	[Eauth2]	"read/write -- authentication unimplemented",	[Etoolong]	"name too long",	[Efidinuse]	"fid in use",	[Econvert]	"protocol botch",	[Eversion]	"version conversion",	[Eauthnone]	"auth -- user 'none' requires no authentication",	[Eauthdisabled]	"auth -- authentication disabled",	/* development */	[Eauthfile]	"auth -- out of auth files",	[Eedge]		"at the bleeding edge",		/* development */}; char*	wormscode[0x80] ={	[0x00]	"no sense",	[0x01]	"invalid command",	[0x02]	"recovered error",	[0x03]	"illegal request",	[0x06]	"unit attention",	[0x07]	"parity error",	[0x08]	"message reject error",	[0x0a]	"copy aborted",	[0x0b]	"initiator detected error",	[0x0c]	"select re-select failed",	[0x0e]	"miscompare", 	[0x10]	"ecc trouble occurred",	[0x11]	"time out error",	[0x12]	"controller error",	[0x13]	"sony i/f II hardware/firmware error",	[0x14]	"scsi hardware/firmware error",	[0x15]	"rom version unmatched error",	[0x16]	"logical block address out of range", 	[0x20]	"command not terminated",	[0x21]	"drive interface parity error",	[0x22]	"loading trouble",	[0x23]	"focus trouble",	[0x24]	"tracking trouble",	[0x25]	"spindle trouble",	[0x26]	"slide trouble",	[0x27]	"skew trouble",	[0x28]	"head lead out",	[0x29]	"write modulation trouble",	[0x2a]	"under laser power",	[0x2b]	"over laser power",	[0x2f]	"drive error", 	[0x30]	"drive power off",	[0x31]	"no disk in drive",	[0x32]	"drive not ready",	[0x38]	"disk already exists in drive",	[0x39]	"no disk in shelf",	[0x3a]	"disk already exists in shelf", 	[0x40]	"write warning",	[0x41]	"write error",	[0x42]	"disk error",	[0x43]	"cannot read disk ID",	[0x44]	"write protect error 1",	[0x45]	"write protect error 2",	[0x46]	"disk warning",	[0x47]	"alternation trouble", 	[0x50]	"specified address not found",	[0x51]	"address block not found",	[0x52]	"all address could not be read",	[0x53]	"data could not be read",	[0x54]	"uncorrectable read error",	[0x55]	"tracking error",	[0x56]	"write servo error",	[0x57]	"write monitor error",	[0x58]	"write verify error", 	[0x60]	"no data in specified address",	[0x61]	"blank check failed",	[0x62]	"controller diagnostics failed",	[0x63]	"drive diagnostice failed",	[0x64]	"diagnostice aborted",	[0x67]	"juke diagnostice failed",	[0x68]	"z-axis servo failed",	[0x69]	"roter servo error",	[0x6a]	"hook servo error",	[0x6b]	"I/O self error",	[0x6c]	"drive 0 error",	[0x6d]	"drive 1 error",	[0x6e]	"shelf error",	[0x6f]	"carrier error", 	[0x70]	"rob made me do it",	[0x71]	"out of range",}; char*	tagnames[] ={	[Tbuck]		"Tbuck",	[Tdir]		"Tdir",	[Tfile]		"Tfile",	[Tfree]		"Tfree",	[Tind1]		"Tind1",	[Tind2]		"Tind2",#ifndef COMPAT32	[Tind3]		"Tind3",	[Tind4]		"Tind4",	/* add more Tind tags here ... */#endif	[Tnone]		"Tnone",	[Tsuper]	"Tsuper",	[Tvirgo]	"Tvirgo",	[Tcache]	"Tcache",};