.TH GPIO 3 SA1100.SH NAMEgpio \- access to GPIO registers.SH SYNOPSIS.B bind -a.B #G.B /dev.PP.nf.B /dev/gpioclear.B /dev/gpioctl.B /dev/gpioedge.B /dev/gpioset.B /dev/gpiostatus.fi.SH DESCRIPTION.PPThe GPIO interfaceserves a one-level directory with five filesthat give access to the GPIO registers in the SA1100.See the SA1100 handbook for details of the functionof the various registers..PPThe control file.B gpioctlaccepts commands to set individual bits in the edge detectregisters.Each control message has three space-separated fields:.IP.EX.I "reg pin value".EE.LPwhere.I regis a single characterdenoting a register,.I pina bit within it, and.I valthe value (0 or 1) for that bit.Valid choices for.I regare:.B d(GPDR),.B r(GRER),.B f(GFER),and.B a(GAFR).For example, the control message.IP.EXd 10 1.EE.LPsets bit 10 (following the handbook's bit-numbering conventions) in the GPIO pindirection register GPDR..PPThe read-only file.B gpiostatusshows the names and values (in hexadecimal) of all GPIO registers..PPThe remaining data filesallow bits to be read by.B Sys->readrequestsand set by.B Sys->writerequests.When read, each file returns the value of a givenregister as a single 8 digit hexadecimal number:.B gpiosetand.B gpioclearboth give the value of the level register, GPLR;and.B gpioedgegives the value of the edge dectect register, GEDR.Each write requestshould present a single number in textual form, whichis assumed to be hexadecimal by default.The value is written to a GPIO register:.B gpiosetcorresponds to GPSR,.B gpioclearcorresponds to GPCR, and.B gpioedgecorresponds to GEDR..SH SOURCE.B /os/sa1100/devgpio.c
.TH GPIO 3 SA1100
.SH NAME
gpio \- access to GPIO registers
.SH SYNOPSIS
.B bind -a
.B #G
.B /dev
.PP
.nf
.B /dev/gpioclear
.B /dev/gpioctl
.B /dev/gpioedge
.B /dev/gpioset
.B /dev/gpiostatus
.fi
.SH DESCRIPTION
.PP
The GPIO interface
serves a one-level directory with five files
that give access to the GPIO registers in the SA1100.
See the SA1100 handbook for details of the function
of the various registers.
.PP
The control file
.B gpioctl
accepts commands to set individual bits in the edge detect
registers.
Each control message has three space-separated fields:
.IP
.EX
.I "reg pin value"
.EE
.LP
where
.I reg
is a single character
denoting a register,
.I pin
a bit within it, and
.I val
the value (0 or 1) for that bit.
Valid choices for
.I reg
are:
.B d
(GPDR),
.B r
(GRER),
.B f
(GFER),
and
.B a
(GAFR).
For example, the control message
.IP
.EX
d 10 1
.EE
.LP
sets bit 10 (following the handbook's bit-numbering conventions) in the GPIO pin
direction register GPDR.
.PP
The read-only file
.B gpiostatus
shows the names and values (in hexadecimal) of all GPIO registers.
.PP
The remaining data files
allow bits to be read by
.B Sys->read
requests
and set by
.B Sys->write
requests.
When read, each file returns the value of a given
register as a single 8 digit hexadecimal number:
.B gpioset
and
.B gpioclear
both give the value of the level register, GPLR;
and
.B gpioedge
gives the value of the edge dectect register, GEDR.
Each write request
should present a single number in textual form, which
is assumed to be hexadecimal by default.
The value is written to a GPIO register:
.B gpioset
corresponds to GPSR,
.B gpioclear
corresponds to GPCR, and
.B gpioedge
corresponds to GEDR.
.SH SOURCE
.B /os/sa1100/devgpio.c