.TH MANGALOAD 8.SH NAMEmangaload \- send new kernel to MANGA bootstrap.SH SYNOPSIS.B auxi/mangaload[.B -48dr].I host.I image.SH DESCRIPTION.I Mangaloaduses an ICMP protocol unique to the Peplink MANGA™ firewall to send a new kernel.I imageto the MANGA bootstrap monitor to burn into flash, replacingthe existing kernel image.To start the loading process, connect to the device's console on its serial port(38400 baud, 8 bits, no parity, 1 stop bit, no flow control),power the device off then on again, and when the.B MANGAprompt appears, quickly type the letter.BR f .Then run.I mangaloadto load the kernel; the device should give status updates as the kernel loads,and as it burns the image into flash.When it has finished, power the device off and on again to start the new kernel..PPBy default,.I mangaloadassumes a 4 Mbyte flash on the device; the.B -8option sets it to 8 Mbytes.The.B -roption causes the.I imageto be loaded into another, larger flash region, used by Linux for its initial root,which can be used by Inferno for general storage.The.B -doption prints a trace of the protocol, for debugging..SH SOURCE.B /appl/cmd/auxi/mangaload.b.br.B /os/manga.SH SEE ALSO.IR bootpd (8),.IR tftpd (8)