# -*- makefile -*-# The file Setup is used by the makesetup script to construct the files# Makefile and config.c, from Makefile.pre and config.c.in,# respectively.  The file Setup itself is initially copied from# Setup.dist; once it exists it will not be overwritten, so you can edit# Setup to your heart's content.  Note that Makefile.pre is created# from Makefile.pre.in by the toplevel configure script. # (VPATH notes: Setup and Makefile.pre are in the build directory, as# are Makefile and config.c; the *.in and *.dist files are in the source# directory.) # Each line in this file describes one or more optional modules.# Modules enabled here will not be compiled by the setup.py script,# so the file can be used to override setup.py's behavior. # Lines have the following structure:## <module> ... [<sourcefile> ...] [<cpparg> ...] [<library> ...]## <sourcefile> is anything ending in .c (.C, .cc, .c++ are C++ files)# <cpparg> is anything starting with -I, -D, -U or -C# <library> is anything ending in .a or beginning with -l or -L# <module> is anything else but should be a valid Python# identifier (letters, digits, underscores, beginning with non-digit)## (As the makesetup script changes, it may recognize some other# arguments as well, e.g. *.so and *.sl as libraries.  See the big# case statement in the makesetup script.)## Lines can also have the form## <name> = <value>## which defines a Make variable definition inserted into Makefile.in## Finally, if a line contains just the word "*shared*" (without the# quotes but with the stars), then the following modules will not be# built statically.  The build process works like this:## 1. Build all modules that are declared as static in Modules/Setup,#    combine them into libpythonxy.a, combine that into python.# 2. Build all modules that are listed as shared in Modules/Setup.# 3. Invoke setup.py. That builds all modules that#    a) are not builtin, and#    b) are not listed in Modules/Setup, and#    c) can be build on the target## Therefore, modules declared to be shared will not be# included in the config.c file, nor in the list of objects to be# added to the library archive, and their linker options won't be# added to the linker options. Rules to create their .o files and# their shared libraries will still be added to the Makefile, and# their names will be collected in the Make variable SHAREDMODS.  This# is used to build modules as shared libraries.  (They can be# installed using "make sharedinstall", which is implied by the# toplevel "make install" target.)  (For compatibility,# *noconfig* has the same effect as *shared*.)## In addition, *static* explicitly declares the following modules to# be static.  Lines containing "*static*" and "*shared*" may thus# alternate throughout this file. # NOTE: As a standard policy, as many modules as can be supported by a# platform should be present.  The distribution comes with all modules# enabled that are supported by most platforms and don't require you# to ftp sources from elsewhere.  # Some special rules to define PYTHONPATH.# Edit the definitions below to indicate which options you are using.# Don't add any whitespace or comments! # Directories where library files get installed.# DESTLIB is for Python modules; MACHDESTLIB for shared libraries.DESTLIB=$(LIBDEST)MACHDESTLIB=$(BINLIBDEST) # NOTE: all the paths are now relative to the prefix that is computed# at run time! # Standard path -- don't edit.# No leading colon since this is the first entry.# Empty since this is now just the runtime prefix.DESTPATH= # Site specific path components -- should begin with : if non-emptySITEPATH= # Standard path components for test modulesTESTPATH= # Path components for machine- or system-dependent modules and shared librariesMACHDEPPATH=:plat-$(MACHDEP)EXTRAMACHDEPPATH= # Path component for the Tkinter-related modules# The TKPATH variable is always enabled, to save you the effort.TKPATH=:lib-tk COREPYTHONPATH=$(DESTPATH)$(SITEPATH)$(TESTPATH)$(MACHDEPPATH)$(EXTRAMACHDEPPATH)$(TKPATH)PYTHONPATH=$(COREPYTHONPATH)  # The modules listed here can't be built as shared libraries for# various reasons; therefore they are listed here instead of in the# normal order. # This only contains the minimal set of modules required to run the # setup.py script in the root of the Python source tree. posix posixmodule.c		# posix (UNIX) system callserrno errnomodule.c		# posix (UNIX) errno valuespwd pwdmodule.c			# this is needed to find out the user's home dir				# if $HOME is not set_sre _sre.c			# Fredrik Lundh's new regular expressions_codecs _codecsmodule.c		# access to the builtin codecs and codec registry_ssl _ssl.c # The zipimport module is always imported at startup. Having it as a# builtin module avoids some bootstrapping problems and reduces overhead.zipimport zipimport.c # The rest of the modules listed in this file are all commented out by# default.  Usually they can be detected and built as dynamically# loaded modules by the new setup.py script added in Python 2.1.  If# you're on a platform that doesn't support dynamic loading, want to # compile modules statically into the Python binary, or need to # specify some odd set of compiler switches, you can uncomment the # appropriate lines below. # ====================================================================== # The Python symtable module depends on .h files that setup.py doesn't track_symtable symtablemodule.c # The SGI specific GL module: GLHACK=-Dclear=__GLclear#gl glmodule.c cgensupport.c -I$(srcdir) $(GLHACK) -lgl -lX11 # Pure module.  Cannot be linked dynamically.# -DWITH_QUANTIFY, -DWITH_PURIFY, or -DWITH_ALL_PURE#WHICH_PURE_PRODUCTS=-DWITH_ALL_PURE#PURE_INCLS=-I/usr/local/include#PURE_STUBLIBS=-L/usr/local/lib -lpurify_stubs -lquantify_stubs#pure puremodule.c $(WHICH_PURE_PRODUCTS) $(PURE_INCLS) $(PURE_STUBLIBS) # Uncommenting the following line tells makesetup that all following# modules are to be built as shared libraries (see above for more# detail; also note that *static* reverses this effect): #*shared* # GNU readline.  Unlike previous Python incarnations, GNU readline is# now incorporated in an optional module, configured in the Setup file# instead of by a configure script switch.  You may have to insert a# -L option pointing to the directory where libreadline.* lives,# and you may have to change -ltermcap to -ltermlib or perhaps remove# it, depending on your system -- see the GNU readline instructions.# It's okay for this to be a shared library, too. #readline readline.c -lreadline -ltermcap  # Modules that should always be present (non UNIX dependent): #array arraymodule.c	# array objects#cmath cmathmodule.c # -lm # complex math library functions#math mathmodule.c # -lm # math library functions, e.g. sin()#_struct _struct.c	# binary structure packing/unpacking#time timemodule.c # -lm # time operations and variables#operator operator.c	# operator.add() and similar goodies#_weakref _weakref.c	# basic weak reference support#_testcapi _testcapimodule.c    # Python C API test module#_random _randommodule.c	# Random number generator#collections collectionsmodule.c # Container types#itertools itertoolsmodule.c	# Functions creating iterators for efficient looping #strop stropmodule.c		# String manipulations #unicodedata unicodedata.c    # static Unicode character database # access to ISO C locale support#_locale _localemodule.c  # -lintl  # Modules with some UNIX dependencies -- on by default:# (If you have a really backward UNIX, select and socket may not be# supported...) #fcntl fcntlmodule.c	# fcntl(2) and ioctl(2)#spwd spwdmodule.c		# spwd(3) #grp grpmodule.c		# grp(3)#select selectmodule.c	# select(2); not on ancient System V # Memory-mapped files (also works on Win32).#mmap mmapmodule.c # CSV file helper#_csv _csv.c # Socket module helper for socket(2)#_socket socketmodule.c # Socket module helper for SSL support; you must comment out the other# socket line above, and possibly edit the SSL variable:#SSL=/usr/local/ssl#_ssl _ssl.c \#	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \#	-L$(SSL)/lib -lssl -lcrypto # The crypt module is now disabled by default because it breaks builds# on many systems (where -lcrypt is needed), e.g. Linux (I believe).## First, look at Setup.config; configure may have set this for you. #crypt cryptmodule.c # -lcrypt	# crypt(3); needs -lcrypt on some systems  # Some more UNIX dependent modules -- off by default, since these# are not supported by all UNIX systems: #nis nismodule.c -lnsl	# Sun yellow pages -- not everywhere#termios termios.c	# Steen Lumholt's termios module#resource resource.c	# Jeremy Hylton's rlimit interface  # Multimedia modules -- off by default.# These don't work for 64-bit platforms!!!# #993173 says audioop works on 64-bit platforms, though.# These represent audio samples or images as strings: #audioop audioop.c	# Operations on audio samples#imageop imageop.c	# Operations on images#rgbimg rgbimgmodule.c	# Read SGI RGB image files (but coded portably)  # Note that the _md5 and _sha modules are normally only built if the# system does not have the OpenSSL libs containing an optimized version. # The _md5 module implements the RSA Data Security, Inc. MD5# Message-Digest Algorithm, described in RFC 1321.  The necessary files# md5.c and md5.h are included here. #_md5 md5module.c md5.c  # The _sha module implements the SHA checksum algorithm.# (NIST's Secure Hash Algorithm.)#_sha shamodule.c  # SGI IRIX specific modules -- off by default. # These module work on any SGI machine: # *** gl must be enabled higher up in this file ***#fm fmmodule.c $(GLHACK) -lfm -lgl		# Font Manager#sgi sgimodule.c			# sgi.nap() and a few more # This module requires the header file# /usr/people/4Dgifts/iristools/include/izoom.h:#imgfile imgfile.c -limage -lgutil -lgl -lm	# Image Processing Utilities  # These modules require the Multimedia Development Option (I think): #al almodule.c -laudio			# Audio Library#cd cdmodule.c -lcdaudio -lds -lmediad	# CD Audio Library#cl clmodule.c -lcl -lawareaudio	# Compression Library#sv svmodule.c yuvconvert.c -lsvideo -lXext -lX11	# Starter Video  # The FORMS library, by Mark Overmars, implements user interface# components such as dialogs and buttons using SGI's GL and FM# libraries.  You must ftp the FORMS library separately from# ftp://ftp.cs.ruu.nl/pub/SGI/FORMS.  It was tested with FORMS 2.2a.# NOTE: if you want to be able to use FORMS and curses simultaneously# (or both link them statically into the same binary), you must# compile all of FORMS with the cc option "-Dclear=__GLclear". # The FORMS variable must point to the FORMS subdirectory of the forms# toplevel directory: #FORMS=/ufs/guido/src/forms/FORMS#fl flmodule.c -I$(FORMS) $(GLHACK) $(FORMS)/libforms.a -lfm -lgl  # SunOS specific modules -- off by default: #sunaudiodev sunaudiodev.c  # A Linux specific module -- off by default; this may also work on # some *BSDs. #linuxaudiodev linuxaudiodev.c  # George Neville-Neil's timing module: #timing timingmodule.c  # The _tkinter module.## The command for _tkinter is long and site specific.  Please# uncomment and/or edit those parts as indicated.  If you don't have a# specific extension (e.g. Tix or BLT), leave the corresponding line# commented out.  (Leave the trailing backslashes in!  If you# experience strange errors, you may want to join all uncommented# lines and remove the backslashes -- the backslash interpretation is# done by the shell's "read" command and it may not be implemented on# every system. # *** Always uncomment this (leave the leading underscore in!):# _tkinter _tkinter.c tkappinit.c -DWITH_APPINIT \# *** Uncomment and edit to reflect where your Tcl/Tk libraries are:#	-L/usr/local/lib \# *** Uncomment and edit to reflect where your Tcl/Tk headers are:#	-I/usr/local/include \# *** Uncomment and edit to reflect where your X11 header files are:#	-I/usr/X11R6/include \# *** Or uncomment this for Solaris:#	-I/usr/openwin/include \# *** Uncomment and edit for Tix extension only:#	-DWITH_TIX -ltix8.1.8.2 \# *** Uncomment and edit for BLT extension only:#	-DWITH_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 \# *** Uncomment and edit for PIL (TkImaging) extension only:#     (See http://www.pythonware.com/products/pil/ for more info)#	-DWITH_PIL -I../Extensions/Imaging/libImaging  tkImaging.c \# *** Uncomment and edit for TOGL extension only:#	-DWITH_TOGL togl.c \# *** Uncomment and edit to reflect your Tcl/Tk versions:#	-ltk8.2 -ltcl8.2 \# *** Uncomment and edit to reflect where your X11 libraries are:#	-L/usr/X11R6/lib \# *** Or uncomment this for Solaris:#	-L/usr/openwin/lib \# *** Uncomment these for TOGL extension only:#	-lGL -lGLU -lXext -lXmu \# *** Uncomment for AIX:#	-lld \# *** Always uncomment this; X11 libraries to link with:#	-lX11 # Lance Ellinghaus's syslog module#syslog syslogmodule.c		# syslog daemon interface  # Curses support, requring the System V version of curses, often# provided by the ncurses library.  e.g. on Linux, link with -lncurses# instead of -lcurses).## First, look at Setup.config; configure may have set this for you. #_curses _cursesmodule.c -lcurses -ltermcap# Wrapper for the panel library that's part of ncurses and SYSV curses.#_curses_panel _curses_panel.c -lpanel -lncurses   # Generic (SunOS / SVR4) dynamic loading module.# This is not needed for dynamic loading of Python modules --# it is a highly experimental and dangerous device for calling# *arbitrary* C functions in *arbitrary* shared libraries: #dl dlmodule.c  # Modules that provide persistent dictionary-like semantics.  You will# probably want to arrange for at least one of them to be available on# your machine, though none are defined by default because of library# dependencies.  The Python module anydbm.py provides an# implementation independent wrapper for these; dumbdbm.py provides# similar functionality (but slower of course) implemented in Python. # The standard Unix dbm module has been moved to Setup.config so that# it will be compiled as a shared library by default.  Compiling it as# a built-in module causes conflicts with the pybsddb3 module since it# creates a static dependency on an out-of-date version of db.so.## First, look at Setup.config; configure may have set this for you. #dbm dbmmodule.c 	# dbm(3) may require -lndbm or similar # Anthony Baxter's gdbm module.  GNU dbm(3) will require -lgdbm:## First, look at Setup.config; configure may have set this for you. #gdbm gdbmmodule.c -I/usr/local/include -L/usr/local/lib -lgdbm  # Sleepycat Berkeley DB interface.## This requires the Sleepycat DB code, see http://www.sleepycat.com/# The earliest supported version of that library is 3.0, the latest# supported version is 4.0 (4.1 is specifically not supported, as that# changes the semantics of transactional databases). A list of available# releases can be found at## http://www.sleepycat.com/update/index.html## Edit the variables DB and DBLIBVERto point to the db top directory# and the subdirectory of PORT where you built it.#DB=/usr/local/BerkeleyDB.4.0#DBLIBVER=4.0#DBINC=$(DB)/include#DBLIB=$(DB)/lib#_bsddb _bsddb.c -I$(DBINC) -L$(DBLIB) -ldb-$(DBLIBVER) # Historical Berkeley DB 1.85## This module is deprecated; the 1.85 version of the Berkeley DB library has# bugs that can cause data corruption. If you can, use later versions of the# library instead, available from <http://www.sleepycat.com/>. #DB=/depot/sundry/src/berkeley-db/db.1.85#DBPORT=$(DB)/PORT/irix.5.3#bsddb185 bsddbmodule.c -I$(DBPORT)/include -I$(DBPORT) $(DBPORT)/libdb.a   # Helper module for various ascii-encoders#binascii binascii.c # Fred Drake's interface to the Python parser#parser parsermodule.c # cStringIO and cPickle#cStringIO cStringIO.c#cPickle cPickle.c  # Lee Busby's SIGFPE modules.# The library to link fpectl with is platform specific.# Choose *one* of the options below for fpectl: # For SGI IRIX (tested on 5.3):#fpectl fpectlmodule.c -lfpe # For Solaris with SunPro compiler (tested on Solaris 2.5 with SunPro C 4.2):# (Without the compiler you don't have -lsunmath.)#fpectl fpectlmodule.c -R/opt/SUNWspro/lib -lsunmath -lm # For other systems: see instructions in fpectlmodule.c.#fpectl fpectlmodule.c ... # Test module for fpectl.  No extra libraries needed.#fpetest fpetestmodule.c # Andrew Kuchling's zlib module.# This require zlib 1.1.3 (or later).# See http://www.gzip.org/zlib/#zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz # Interface to the Expat XML parser## Expat was written by James Clark and is now maintained by a group of# developers on SourceForge; see www.libexpat.org for more# information.  The pyexpat module was written by Paul Prescod after a# prototype by Jack Jansen.  Source of Expat 1.95.2 is included in# Modules/expat/.  Usage of a system shared libexpat.so/expat.dll is# not advised.## More information on Expat can be found at www.libexpat.org.##EXPAT_DIR=/usr/local/src/expat-1.95.2#pyexpat pyexpat.c -DHAVE_EXPAT_H -I$(EXPAT_DIR)/lib -L$(EXPAT_DIR) -lexpat  # Hye-Shik Chang's CJKCodecs # multibytecodec is required for all the other CJK codec modules#_multibytecodec cjkcodecs/multibytecodec.c #_codecs_cn cjkcodecs/_codecs_cn.c#_codecs_hk cjkcodecs/_codecs_hk.c#_codecs_iso2022 cjkcodecs/_codecs_iso2022.c#_codecs_jp cjkcodecs/_codecs_jp.c#_codecs_kr cjkcodecs/_codecs_kr.c#_codecs_tw cjkcodecs/_codecs_tw.c # Example -- included for reference only:# xx xxmodule.c # Another example -- the 'xxsubtype' module shows C-level subtyping in actionxxsubtype xxsubtype.c