# Port on which the server is listening. You must select a different# port from your standard HTTP web server if it is running on the same# computer.Port 8090# Address on which the server is bound. Only useful if you have# several network interfaces.BindAddress 0.0.0.0# Number of simultaneous HTTP connections that can be handled. It has# to be defined *before* the MaxClients parameter, since it defines the# MaxClients maximum limit.MaxHTTPConnections 2000# Number of simultaneous requests that can be handled. Since AVServer# is very fast, it is more likely that you will want to leave this high# and use MaxBandwidth, below.MaxClients 1000# This the maximum amount of kbit/sec that you are prepared to# consume when streaming to clients.MaxBandwidth 1000# Access log file (uses standard Apache log file format)# '-' is the standard output.CustomLog -################################################################### Definition of the live feeds. Each live feed contains one video# and/or audio sequence coming from an avconv encoder or another# avserver. This sequence may be encoded simultaneously with several# codecs at several resolutions.<Feed feed1.ffm># You must use 'avconv' to send a live feed to avserver. In this# example, you can type:## avconv http://localhost:8090/feed1.ffm# avserver can also do time shifting. It means that it can stream any# previously recorded live stream. The request should contain:# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify# a path where the feed is stored on disk. You also specify the# maximum size of the feed, where zero means unlimited. Default:# File=/tmp/feed_name.ffm FileMaxSize=5MFile /tmp/feed1.ffmFileMaxSize 200K# You could specify# ReadOnlyFile /saved/specialvideo.ffm# This marks the file as readonly and it will not be deleted or updated.# Specify launch in order to start avconv automatically.# First avconv must be defined with an appropriate path if needed,# after that options can follow, but avoid adding the http:// field#Launch avconv# Only allow connections from localhost to the feed.ACL allow 127.0.0.1</Feed>################################################################### Now you can define each stream which will be generated from the# original audio and video stream. Each format has a filename (here# 'test1.mpg'). AVServer will send this stream when answering a# request containing this filename.<Stream test1.mpg># coming from live feed 'feed1'Feed feed1.ffm# Format of the stream : you can choose among:# mpeg : MPEG-1 multiplexed video and audio# mpegvideo : only MPEG-1 video# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)# ogg : Ogg format (Vorbis audio codec)# rm : RealNetworks-compatible stream. Multiplexed audio and video.# ra : RealNetworks-compatible stream. Audio only.# mpjpeg : Multipart JPEG (works with Netscape without any plugin)# jpeg : Generate a single JPEG image.# asf : ASF compatible streaming (Windows Media Player format).# swf : Macromedia Flash compatible stream# avi : AVI format (MPEG-4 video, MPEG audio sound)Format mpeg# Bitrate for the audio stream. Codecs usually support only a few# different bitrates.AudioBitRate 32# Number of audio channels: 1 = mono, 2 = stereoAudioChannels 1# Sampling frequency for audio. When using low bitrates, you should# lower this frequency to 22050 or 11025. The supported frequencies# depend on the selected audio codec.AudioSampleRate 44100# Bitrate for the video streamVideoBitRate 64# Ratecontrol buffer sizeVideoBufferSize 40# Number of frames per secondVideoFrameRate 3# Size of the video frame: WxH (default: 160x128)# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,# hd1080VideoSize 160x128# Transmit only intra frames (useful for low bitrates, but kills frame rate).#VideoIntraOnly# If non-intra only, an intra frame is transmitted every VideoGopSize# frames. Video synchronization can only begin at an intra frame.VideoGopSize 12# More MPEG-4 parameters# VideoHighQuality# Video4MotionVector# Choose your codecs:#AudioCodec mp2#VideoCodec mpeg1video# Suppress audio#NoAudio# Suppress video#NoVideo#VideoQMin 3#VideoQMax 31# Set this to the number of seconds backwards in time to start. Note that# most players will buffer 5-10 seconds of video, and also you need to allow# for a keyframe to appear in the data stream.#Preroll 15# ACL:# You can allow ranges of addresses (or single addresses)#ACL ALLOW <first address> <last address># You can deny ranges of addresses (or single addresses)#ACL DENY <first address> <last address># You can repeat the ACL allow/deny as often as you like. It is on a per# stream basis. The first match defines the action. If there are no matches,# then the default is the inverse of the last ACL statement.## Thus 'ACL allow localhost' only allows access from localhost.# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and# allow everybody else.</Stream>################################################################### Example streams# Multipart JPEG#<Stream test.mjpg>#Feed feed1.ffm#Format mpjpeg#VideoFrameRate 2#VideoIntraOnly#NoAudio#Strict -1#</Stream># Single JPEG#<Stream test.jpg>#Feed feed1.ffm#Format jpeg#VideoFrameRate 2#VideoIntraOnly##VideoSize 352x240#NoAudio#Strict -1#</Stream># Flash#<Stream test.swf>#Feed feed1.ffm#Format swf#VideoFrameRate 2#VideoIntraOnly#NoAudio#</Stream># ASF compatible<Stream test.asf>Feed feed1.ffmFormat asfVideoFrameRate 15VideoSize 352x240VideoBitRate 256VideoBufferSize 40VideoGopSize 30AudioBitRate 64StartSendOnKey</Stream># MP3 audio#<Stream test.mp3>#Feed feed1.ffm#Format mp2#AudioCodec mp3#AudioBitRate 64#AudioChannels 1#AudioSampleRate 44100#NoVideo#</Stream># Ogg Vorbis audio#<Stream test.ogg>#Feed feed1.ffm#Title "Stream title"#AudioBitRate 64#AudioChannels 2#AudioSampleRate 44100#NoVideo#</Stream># Real with audio only at 32 kbits#<Stream test.ra>#Feed feed1.ffm#Format rm#AudioBitRate 32#NoVideo#NoAudio#</Stream># Real with audio and video at 64 kbits#<Stream test.rm>#Feed feed1.ffm#Format rm#AudioBitRate 32#VideoBitRate 128#VideoFrameRate 25#VideoGopSize 25#NoAudio#</Stream>################################################################### A stream coming from a file: you only need to set the input# filename and optionally a new format. Supported conversions:# AVI -> ASF#<Stream file.rm>#File "/usr/local/httpd/htdocs/tlive.rm"#NoAudio#</Stream>#<Stream file.asf>#File "/usr/local/httpd/htdocs/test.asf"#NoAudio#Author "Me"#Copyright "Super MegaCorp"#Title "Test stream from disk"#Comment "Test comment"#</Stream>################################################################### RTSP examples## You can access this stream with the RTSP URL:# rtsp://localhost:5454/test1-rtsp.mpg## A non-standard RTSP redirector is also created. Its URL is:# http://localhost:8090/test1-rtsp.rtsp#<Stream test1-rtsp.mpg>#Format rtp#File "/usr/local/httpd/htdocs/test1.mpg"#</Stream># Transcode an incoming live feed to another live feed,# using libx264 and video presets#<Stream live.h264>#Format rtp#Feed feed1.ffm#VideoCodec libx264#VideoFrameRate 24#VideoBitRate 100#VideoSize 480x272#AVPresetVideo default#AVPresetVideo baseline#AVOptionVideo flags +global_header##AudioCodec libfaac#AudioBitRate 32#AudioChannels 2#AudioSampleRate 22050#AVOptionAudio flags +global_header#</Stream>################################################################### SDP/multicast examples## If you want to send your stream in multicast, you must set the# multicast address with MulticastAddress. The port and the TTL can# also be set.## An SDP file is automatically generated by avserver by adding the# 'sdp' extension to the stream name (here# http://localhost:8090/test1-sdp.sdp). You should usually give this# file to your player to play the stream.## The 'NoLoop' option can be used to avoid looping when the stream is# terminated.#<Stream test1-sdp.mpg>#Format rtp#File "/usr/local/httpd/htdocs/test1.mpg"#MulticastAddress 224.124.0.1#MulticastPort 5000#MulticastTTL 16#NoLoop#</Stream>################################################################### Special streams# Server status<Stream stat.html>Format status# Only allow local people to get the statusACL allow localhostACL allow 192.168.0.0 192.168.255.255#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico</Stream># Redirect index.html to the appropriate site<Redirect index.html>URL http://www.libav.org/</Redirect>
# Port on which the server is listening. You must select a different
# port from your standard HTTP web server if it is running on the same
# computer.
Port 8090
# Address on which the server is bound. Only useful if you have
# several network interfaces.
BindAddress 0.0.0.0
# Number of simultaneous HTTP connections that can be handled. It has
# to be defined *before* the MaxClients parameter, since it defines the
# MaxClients maximum limit.
MaxHTTPConnections 2000
# Number of simultaneous requests that can be handled. Since AVServer
# is very fast, it is more likely that you will want to leave this high
# and use MaxBandwidth, below.
MaxClients 1000
# This the maximum amount of kbit/sec that you are prepared to
# consume when streaming to clients.
MaxBandwidth 1000
# Access log file (uses standard Apache log file format)
# '-' is the standard output.
CustomLog -
##################################################################
# Definition of the live feeds. Each live feed contains one video
# and/or audio sequence coming from an avconv encoder or another
# avserver. This sequence may be encoded simultaneously with several
# codecs at several resolutions.
<Feed feed1.ffm>
# You must use 'avconv' to send a live feed to avserver. In this
# example, you can type:
#
# avconv http://localhost:8090/feed1.ffm
# avserver can also do time shifting. It means that it can stream any
# previously recorded live stream. The request should contain:
# "http://xxxx?date=[YYYY-MM-DDT][[HH:]MM:]SS[.m...]".You must specify
# a path where the feed is stored on disk. You also specify the
# maximum size of the feed, where zero means unlimited. Default:
# File=/tmp/feed_name.ffm FileMaxSize=5M
File /tmp/feed1.ffm
FileMaxSize 200K
# You could specify
# ReadOnlyFile /saved/specialvideo.ffm
# This marks the file as readonly and it will not be deleted or updated.
# Specify launch in order to start avconv automatically.
# First avconv must be defined with an appropriate path if needed,
# after that options can follow, but avoid adding the http:// field
#Launch avconv
# Only allow connections from localhost to the feed.
ACL allow 127.0.0.1
</Feed>
##################################################################
# Now you can define each stream which will be generated from the
# original audio and video stream. Each format has a filename (here
# 'test1.mpg'). AVServer will send this stream when answering a
# request containing this filename.
<Stream test1.mpg>
# coming from live feed 'feed1'
Feed feed1.ffm
# Format of the stream : you can choose among:
# mpeg : MPEG-1 multiplexed video and audio
# mpegvideo : only MPEG-1 video
# mp2 : MPEG-2 audio (use AudioCodec to select layer 2 and 3 codec)
# ogg : Ogg format (Vorbis audio codec)
# rm : RealNetworks-compatible stream. Multiplexed audio and video.
# ra : RealNetworks-compatible stream. Audio only.
# mpjpeg : Multipart JPEG (works with Netscape without any plugin)
# jpeg : Generate a single JPEG image.
# asf : ASF compatible streaming (Windows Media Player format).
# swf : Macromedia Flash compatible stream
# avi : AVI format (MPEG-4 video, MPEG audio sound)
Format mpeg
# Bitrate for the audio stream. Codecs usually support only a few
# different bitrates.
AudioBitRate 32
# Number of audio channels: 1 = mono, 2 = stereo
AudioChannels 1
# Sampling frequency for audio. When using low bitrates, you should
# lower this frequency to 22050 or 11025. The supported frequencies
# depend on the selected audio codec.
AudioSampleRate 44100
# Bitrate for the video stream
VideoBitRate 64
# Ratecontrol buffer size
VideoBufferSize 40
# Number of frames per second
VideoFrameRate 3
# Size of the video frame: WxH (default: 160x128)
# The following abbreviations are defined: sqcif, qcif, cif, 4cif, qqvga,
# qvga, vga, svga, xga, uxga, qxga, sxga, qsxga, hsxga, wvga, wxga, wsxga,
# wuxga, woxga, wqsxga, wquxga, whsxga, whuxga, cga, ega, hd480, hd720,
# hd1080
VideoSize 160x128
# Transmit only intra frames (useful for low bitrates, but kills frame rate).
#VideoIntraOnly
# If non-intra only, an intra frame is transmitted every VideoGopSize
# frames. Video synchronization can only begin at an intra frame.
VideoGopSize 12
# More MPEG-4 parameters
# VideoHighQuality
# Video4MotionVector
# Choose your codecs:
#AudioCodec mp2
#VideoCodec mpeg1video
# Suppress audio
#NoAudio
# Suppress video
#NoVideo
#VideoQMin 3
#VideoQMax 31
# Set this to the number of seconds backwards in time to start. Note that
# most players will buffer 5-10 seconds of video, and also you need to allow
# for a keyframe to appear in the data stream.
#Preroll 15
# ACL:
# You can allow ranges of addresses (or single addresses)
#ACL ALLOW <first address> <last address>
# You can deny ranges of addresses (or single addresses)
#ACL DENY <first address> <last address>
# You can repeat the ACL allow/deny as often as you like. It is on a per
# stream basis. The first match defines the action. If there are no matches,
# then the default is the inverse of the last ACL statement.
#
# Thus 'ACL allow localhost' only allows access from localhost.
# 'ACL deny 1.0.0.0 1.255.255.255' would deny the whole of network 1 and
# allow everybody else.
</Stream>
##################################################################
# Example streams
# Multipart JPEG
#<Stream test.mjpg>
#Feed feed1.ffm
#Format mpjpeg
#VideoFrameRate 2
#VideoIntraOnly
#NoAudio
#Strict -1
#</Stream>
# Single JPEG
#<Stream test.jpg>
#Feed feed1.ffm
#Format jpeg
#VideoFrameRate 2
#VideoIntraOnly
##VideoSize 352x240
#NoAudio
#Strict -1
#</Stream>
# Flash
#<Stream test.swf>
#Feed feed1.ffm
#Format swf
#VideoFrameRate 2
#VideoIntraOnly
#NoAudio
#</Stream>
# ASF compatible
<Stream test.asf>
Feed feed1.ffm
Format asf
VideoFrameRate 15
VideoSize 352x240
VideoBitRate 256
VideoBufferSize 40
VideoGopSize 30
AudioBitRate 64
StartSendOnKey
</Stream>
# MP3 audio
#<Stream test.mp3>
#Feed feed1.ffm
#Format mp2
#AudioCodec mp3
#AudioBitRate 64
#AudioChannels 1
#AudioSampleRate 44100
#NoVideo
#</Stream>
# Ogg Vorbis audio
#<Stream test.ogg>
#Feed feed1.ffm
#Title "Stream title"
#AudioBitRate 64
#AudioChannels 2
#AudioSampleRate 44100
#NoVideo
#</Stream>
# Real with audio only at 32 kbits
#<Stream test.ra>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#NoVideo
#NoAudio
#</Stream>
# Real with audio and video at 64 kbits
#<Stream test.rm>
#Feed feed1.ffm
#Format rm
#AudioBitRate 32
#VideoBitRate 128
#VideoFrameRate 25
#VideoGopSize 25
#NoAudio
#</Stream>
##################################################################
# A stream coming from a file: you only need to set the input
# filename and optionally a new format. Supported conversions:
# AVI -> ASF
#<Stream file.rm>
#File "/usr/local/httpd/htdocs/tlive.rm"
#NoAudio
#</Stream>
#<Stream file.asf>
#File "/usr/local/httpd/htdocs/test.asf"
#NoAudio
#Author "Me"
#Copyright "Super MegaCorp"
#Title "Test stream from disk"
#Comment "Test comment"
#</Stream>
##################################################################
# RTSP examples
#
# You can access this stream with the RTSP URL:
# rtsp://localhost:5454/test1-rtsp.mpg
#
# A non-standard RTSP redirector is also created. Its URL is:
# http://localhost:8090/test1-rtsp.rtsp
#<Stream test1-rtsp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#</Stream>
# Transcode an incoming live feed to another live feed,
# using libx264 and video presets
#<Stream live.h264>
#Format rtp
#Feed feed1.ffm
#VideoCodec libx264
#VideoFrameRate 24
#VideoBitRate 100
#VideoSize 480x272
#AVPresetVideo default
#AVPresetVideo baseline
#AVOptionVideo flags +global_header
#
#AudioCodec libfaac
#AudioBitRate 32
#AudioChannels 2
#AudioSampleRate 22050
#AVOptionAudio flags +global_header
#</Stream>
##################################################################
# SDP/multicast examples
#
# If you want to send your stream in multicast, you must set the
# multicast address with MulticastAddress. The port and the TTL can
# also be set.
#
# An SDP file is automatically generated by avserver by adding the
# 'sdp' extension to the stream name (here
# http://localhost:8090/test1-sdp.sdp). You should usually give this
# file to your player to play the stream.
#
# The 'NoLoop' option can be used to avoid looping when the stream is
# terminated.
#<Stream test1-sdp.mpg>
#Format rtp
#File "/usr/local/httpd/htdocs/test1.mpg"
#MulticastAddress 224.124.0.1
#MulticastPort 5000
#MulticastTTL 16
#NoLoop
#</Stream>
##################################################################
# Special streams
# Server status
<Stream stat.html>
Format status
# Only allow local people to get the status
ACL allow localhost
ACL allow 192.168.0.0 192.168.255.255
#FaviconURL http://pond1.gladstonefamily.net:8080/favicon.ico
</Stream>
# Redirect index.html to the appropriate site
<Redirect index.html>
URL http://www.libav.org/
</Redirect>