/* SPDX-License-Identifier: GPL-2.0-or-later *//* * drivers/net/bond/bond_options.h - bonding options * Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com> */ #ifndef _NET_BOND_OPTIONS_H#define _NET_BOND_OPTIONS_H #define BOND_OPT_MAX_NAMELEN 32#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)#define BOND_MODE_ALL_EX(x) (~(x)) /* Option flags: * BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting * BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting * BOND_OPTFLAG_RAWVAL - the option parses the value itself */enum { BOND_OPTFLAG_NOSLAVES = BIT(0), BOND_OPTFLAG_IFDOWN = BIT(1), BOND_OPTFLAG_RAWVAL = BIT(2)}; /* Value type flags: * BOND_VALFLAG_DEFAULT - mark the value as default * BOND_VALFLAG_(MIN|MAX) - mark the value as min/max */enum { BOND_VALFLAG_DEFAULT = BIT(0), BOND_VALFLAG_MIN = BIT(1), BOND_VALFLAG_MAX = BIT(2)}; /* Option IDs, their bit positions correspond to their IDs */enum { BOND_OPT_MODE, BOND_OPT_PACKETS_PER_SLAVE, BOND_OPT_XMIT_HASH, BOND_OPT_ARP_VALIDATE, BOND_OPT_ARP_ALL_TARGETS, BOND_OPT_FAIL_OVER_MAC, BOND_OPT_ARP_INTERVAL, BOND_OPT_ARP_TARGETS, BOND_OPT_DOWNDELAY, BOND_OPT_UPDELAY, BOND_OPT_LACP_RATE, BOND_OPT_MINLINKS, BOND_OPT_AD_SELECT, BOND_OPT_NUM_PEER_NOTIF, BOND_OPT_MIIMON, BOND_OPT_PRIMARY, BOND_OPT_PRIMARY_RESELECT, BOND_OPT_USE_CARRIER, BOND_OPT_ACTIVE_SLAVE, BOND_OPT_QUEUE_ID, BOND_OPT_ALL_SLAVES_ACTIVE, BOND_OPT_RESEND_IGMP, BOND_OPT_LP_INTERVAL, BOND_OPT_SLAVES, BOND_OPT_TLB_DYNAMIC_LB, BOND_OPT_AD_ACTOR_SYS_PRIO, BOND_OPT_AD_ACTOR_SYSTEM, BOND_OPT_AD_USER_PORT_KEY, BOND_OPT_NUM_PEER_NOTIF_ALIAS, BOND_OPT_PEER_NOTIF_DELAY, BOND_OPT_LAST}; /* This structure is used for storing option values and for passing option * values when changing an option. The logic when used as an arg is as follows: * - if string != NULL -> parse it, if the opt is RAW type then return it, else * return the parse result * - if string == NULL -> parse value */struct bond_opt_value { char *string; u64 value; u32 flags;}; struct bonding; struct bond_option { int id; const char *name; const char *desc; u32 flags; /* unsuppmodes is used to denote modes in which the option isn't * supported. */ unsigned long unsuppmodes; /* supported values which this option can have, can be a subset of * BOND_OPTVAL_RANGE's value range */ const struct bond_opt_value *values; int (*set)(struct bonding *bond, const struct bond_opt_value *val);}; int __bond_opt_set(struct bonding *bond, unsigned int option, struct bond_opt_value *val);int __bond_opt_set_notify(struct bonding *bond, unsigned int option, struct bond_opt_value *val);int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf); const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt, struct bond_opt_value *val);const struct bond_option *bond_opt_get(unsigned int option);const struct bond_option *bond_opt_get_by_name(const char *name);const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val); /* This helper is used to initialize a bond_opt_value structure for parameter * passing. There should be either a valid string or value, but not both. * When value is ULLONG_MAX then string will be used. */static inline void __bond_opt_init(struct bond_opt_value *optval, char *string, u64 value){ memset(optval, 0, sizeof(*optval)); optval->value = ULLONG_MAX; if (value == ULLONG_MAX) optval->string = string; else optval->value = value;}#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX) void bond_option_arp_ip_targets_clear(struct bonding *bond); #endif /* _NET_BOND_OPTIONS_H */
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* drivers/net/bond/bond_options.h - bonding options
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
*/
#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H
#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))
/* Option flags:
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
*/
enum {
BOND_OPTFLAG_NOSLAVES = BIT(0),
BOND_OPTFLAG_IFDOWN = BIT(1),
BOND_OPTFLAG_RAWVAL = BIT(2)
};
/* Value type flags:
* BOND_VALFLAG_DEFAULT - mark the value as default
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
*/
enum {
BOND_VALFLAG_DEFAULT = BIT(0),
BOND_VALFLAG_MIN = BIT(1),
BOND_VALFLAG_MAX = BIT(2)
};
/* Option IDs, their bit positions correspond to their IDs */
enum {
BOND_OPT_MODE,
BOND_OPT_PACKETS_PER_SLAVE,
BOND_OPT_XMIT_HASH,
BOND_OPT_ARP_VALIDATE,
BOND_OPT_ARP_ALL_TARGETS,
BOND_OPT_FAIL_OVER_MAC,
BOND_OPT_ARP_INTERVAL,
BOND_OPT_ARP_TARGETS,
BOND_OPT_DOWNDELAY,
BOND_OPT_UPDELAY,
BOND_OPT_LACP_RATE,
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
BOND_OPT_MIIMON,
BOND_OPT_PRIMARY,
BOND_OPT_PRIMARY_RESELECT,
BOND_OPT_USE_CARRIER,
BOND_OPT_ACTIVE_SLAVE,
BOND_OPT_QUEUE_ID,
BOND_OPT_ALL_SLAVES_ACTIVE,
BOND_OPT_RESEND_IGMP,
BOND_OPT_LP_INTERVAL,
BOND_OPT_SLAVES,
BOND_OPT_TLB_DYNAMIC_LB,
BOND_OPT_AD_ACTOR_SYS_PRIO,
BOND_OPT_AD_ACTOR_SYSTEM,
BOND_OPT_AD_USER_PORT_KEY,
BOND_OPT_NUM_PEER_NOTIF_ALIAS,
BOND_OPT_PEER_NOTIF_DELAY,
BOND_OPT_LAST
};
/* This structure is used for storing option values and for passing option
* values when changing an option. The logic when used as an arg is as follows:
* - if string != NULL -> parse it, if the opt is RAW type then return it, else
* return the parse result
* - if string == NULL -> parse value
*/
struct bond_opt_value {
char *string;
u64 value;
u32 flags;
};
struct bonding;
struct bond_option {
int id;
const char *name;
const char *desc;
u32 flags;
/* unsuppmodes is used to denote modes in which the option isn't
* supported.
*/
unsigned long unsuppmodes;
/* supported values which this option can have, can be a subset of
* BOND_OPTVAL_RANGE's value range
*/
const struct bond_opt_value *values;
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
};
int __bond_opt_set(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
/* This helper is used to initialize a bond_opt_value structure for parameter
* passing. There should be either a valid string or value, but not both.
* When value is ULLONG_MAX then string will be used.
*/
static inline void __bond_opt_init(struct bond_opt_value *optval,
char *string, u64 value)
{
memset(optval, 0, sizeof(*optval));
optval->value = ULLONG_MAX;
if (value == ULLONG_MAX)
optval->string = string;
else
optval->value = value;
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
void bond_option_arp_ip_targets_clear(struct bonding *bond);
#endif /* _NET_BOND_OPTIONS_H */