if (!cpu_present(cpu)) return -EINVAL; cpus_write_lock(); cpuhp_tasks_frozen = tasks_frozen; prev_state = cpuhp_set_state(st, target); /* * If the current CPU state is in the range of the AP hotplug thread, * then we need to kick the thread. */ if (st->state > CPUHP_TEARDOWN_CPU) { st->target = max((int)target, CPUHP_TEARDOWN_CPU); ret = cpuhp_kick_ap_work(cpu); /* * The AP side has done the error rollback already. Just * return the error code.. */ if (ret) goto out; /* * We might have stopped still in the range of the AP hotplug * thread. Nothing to do anymore. */ if (st->state > CPUHP_TEARDOWN_CPU) goto out; st->target = target; } /* * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need * to do the further cleanups. */ ret = cpuhp_down_callbacks(cpu, st, target); if (ret && st->state == CPUHP_TEARDOWN_CPU && st->state < prev_state) { cpuhp_reset_state(st, prev_state); __cpuhp_kick_ap(st); } out: cpus_write_unlock(); /* * Do post unplug cleanup. This is still protected against * concurrent CPU hotplug via cpu_add_remove_lock. */ lockup_detector_cleanup(); arch_smt_update(); return ret;} static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target){ if (cpu_hotplug_disabled) return -EBUSY; return _cpu_down(cpu, 0, target);} static int cpu_down(unsigned int cpu, enum cpuhp_state target){ int err; cpu_maps_update_begin(); err = cpu_down_maps_locked(cpu, target); cpu_maps_update_done(); return err;} /** * cpu_device_down - Bring down a cpu device * @dev: Pointer to the cpu device to offline * * This function is meant to be used by device core cpu subsystem only. * * Other subsystems should use remove_cpu() instead. */int cpu_device_down(struct device *dev){ return cpu_down(dev->id, CPUHP_OFFLINE);} int remove_cpu(unsigned int cpu){ int ret; lock_device_hotplug(); ret = device_offline(get_cpu_device(cpu)); unlock_device_hotplug(); return ret;}EXPORT_SYMBOL_GPL(remove_cpu); void smp_shutdown_nonboot_cpus(unsigned int primary_cpu){ unsigned int cpu; int error; cpu_maps_update_begin(); /* * Make certain the cpu I'm about to reboot on is online. * * This is inline to what migrate_to_reboot_cpu() already do. */ if (!cpu_online(primary_cpu)) primary_cpu = cpumask_first(cpu_online_mask); for_each_online_cpu(cpu) { if (cpu == primary_cpu) continue; error = cpu_down_maps_locked(cpu, CPUHP_OFFLINE); if (error) { pr_err("Failed to offline CPU%d - error=%d", cpu, error); break; } } /* * Ensure all but the reboot CPU are offline. */ BUG_ON(num_online_cpus() > 1); /* * Make sure the CPUs won't be enabled by someone else after this * point. Kexec will reboot to a new kernel shortly resetting * everything along the way. */ cpu_hotplug_disabled++; cpu_maps_update_done();} #else#define takedown_cpu NULL#endif /*CONFIG_HOTPLUG_CPU*/ /** * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU * @cpu: cpu that just started * * It must be called by the arch code on the new cpu, before the new cpu * enables interrupts and before the "boot" cpu returns from __cpu_up(). */void notify_cpu_starting(unsigned int cpu){ struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE); int ret; rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */ cpumask_set_cpu(cpu, &cpus_booted_once_mask); while (st->state < target) { st->state++; ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL); /* * STARTING must not fail! */ WARN_ON_ONCE(ret); }} /* * Called from the idle task. Wake up the controlling task which brings the * hotplug thread of the upcoming CPU up and then delegates the rest of the * online bringup to the hotplug thread. */void cpuhp_online_idle(enum cpuhp_state state){ struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); /* Happens for the boot cpu */ if (state != CPUHP_AP_ONLINE_IDLE) return; /* * Unpart the stopper thread before we start the idle loop (and start * scheduling); this ensures the stopper task is always available. */ stop_machine_unpark(smp_processor_id()); st->state = CPUHP_AP_ONLINE_IDLE; complete_ap_thread(st, true);} /* Requires cpu_add_remove_lock to be held */static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target){ struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); struct task_struct *idle; int ret = 0; cpus_write_lock(); if (!cpu_present(cpu)) { ret = -EINVAL; goto out; } /* * The caller of cpu_up() might have raced with another * caller. Nothing to do. */ if (st->state >= target) goto out; if (st->state == CPUHP_OFFLINE) { /* Let it fail before we try to bring the cpu up */ idle = idle_thread_get(cpu); if (IS_ERR(idle)) { ret = PTR_ERR(idle); goto out; } } cpuhp_tasks_frozen = tasks_frozen; cpuhp_set_state(st, target); /* * If the current CPU state is in the range of the AP hotplug thread, * then we need to kick the thread once more. */ if (st->state > CPUHP_BRINGUP_CPU) { ret = cpuhp_kick_ap_work(cpu); /* * The AP side has done the error rollback already. Just * return the error code.. */ if (ret) goto out; } /* * Try to reach the target state. We max out on the BP at * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is * responsible for bringing it up to the target state. */ target = min((int)target, CPUHP_BRINGUP_CPU); ret = cpuhp_up_callbacks(cpu, st, target);out: cpus_write_unlock(); arch_smt_update(); return ret;} static int cpu_up(unsigned int cpu, enum cpuhp_state target){ int err = 0; if (!cpu_possible(cpu)) { pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n", cpu);#if defined(CONFIG_IA64) pr_err("please check additional_cpus= boot parameter\n");#endif return -EINVAL; } err = try_online_node(cpu_to_node(cpu)); if (err) return err; cpu_maps_update_begin(); if (cpu_hotplug_disabled) { err = -EBUSY; goto out; } if (!cpu_smt_allowed(cpu)) { err = -EPERM; goto out; } err = _cpu_up(cpu, 0, target);out: cpu_maps_update_done(); return err;} /** * cpu_device_up - Bring up a cpu device * @dev: Pointer to the cpu device to online * * This function is meant to be used by device core cpu subsystem only. * * Other subsystems should use add_cpu() instead. */int cpu_device_up(struct device *dev){ return cpu_up(dev->id, CPUHP_ONLINE);} int add_cpu(unsigned int cpu){ int ret; lock_device_hotplug(); ret = device_online(get_cpu_device(cpu)); unlock_device_hotplug(); return ret;}EXPORT_SYMBOL_GPL(add_cpu); /** * bringup_hibernate_cpu - Bring up the CPU that we hibernated on * @sleep_cpu: The cpu we hibernated on and should be brought up. * * On some architectures like arm64, we can hibernate on any CPU, but on * wake up the CPU we hibernated on might be offline as a side effect of * using maxcpus= for example. */int bringup_hibernate_cpu(unsigned int sleep_cpu){ int ret; if (!cpu_online(sleep_cpu)) { pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); ret = cpu_up(sleep_cpu, CPUHP_ONLINE); if (ret) { pr_err("Failed to bring hibernate-CPU up!\n"); return ret; } } return 0;} void bringup_nonboot_cpus(unsigned int setup_max_cpus){ unsigned int cpu; for_each_present_cpu(cpu) { if (num_online_cpus() >= setup_max_cpus) break; if (!cpu_online(cpu)) cpu_up(cpu, CPUHP_ONLINE); }} #ifdef CONFIG_PM_SLEEP_SMPstatic cpumask_var_t frozen_cpus; int freeze_secondary_cpus(int primary){ int cpu, error = 0; cpu_maps_update_begin(); if (primary == -1) { primary = cpumask_first(cpu_online_mask); if (!housekeeping_cpu(primary, HK_FLAG_TIMER)) primary = housekeeping_any_cpu(HK_FLAG_TIMER); } else { if (!cpu_online(primary)) primary = cpumask_first(cpu_online_mask); } /* * We take down all of the non-boot CPUs in one shot to avoid races * with the userspace trying to use the CPU hotplug at the same time */ cpumask_clear(frozen_cpus); pr_info("Disabling non-boot CPUs ...\n"); for_each_online_cpu(cpu) { if (cpu == primary) continue; if (pm_wakeup_pending()) { pr_info("Wakeup pending. Abort CPU freeze\n"); error = -EBUSY; break; } trace_suspend_resume(TPS("CPU_OFF"), cpu, true); error = _cpu_down(cpu, 1, CPUHP_OFFLINE); trace_suspend_resume(TPS("CPU_OFF"), cpu, false); if (!error) cpumask_set_cpu(cpu, frozen_cpus); else { pr_err("Error taking CPU%d down: %d\n", cpu, error); break; } } if (!error) BUG_ON(num_online_cpus() > 1); else pr_err("Non-boot CPUs are not disabled\n"); /* * Make sure the CPUs won't be enabled by someone else. We need to do * this even in case of failure as all freeze_secondary_cpus() users are * supposed to do thaw_secondary_cpus() on the failure path. */ cpu_hotplug_disabled++; cpu_maps_update_done(); return error;} void __weak arch_thaw_secondary_cpus_begin(void){} void __weak arch_thaw_secondary_cpus_end(void){} void thaw_secondary_cpus(void){ int cpu, error; /* Allow everyone to use the CPU hotplug again */ cpu_maps_update_begin(); __cpu_hotplug_enable(); if (cpumask_empty(frozen_cpus)) goto out; pr_info("Enabling non-boot CPUs ...\n"); arch_thaw_secondary_cpus_begin(); for_each_cpu(cpu, frozen_cpus) { trace_suspend_resume(TPS("CPU_ON"), cpu, true); error = _cpu_up(cpu, 1, CPUHP_ONLINE); trace_suspend_resume(TPS("CPU_ON"), cpu, false); if (!error) { pr_info("CPU%d is up\n", cpu); continue; } pr_warn("Error taking CPU%d up: %d\n", cpu, error); } arch_thaw_secondary_cpus_end(); cpumask_clear(frozen_cpus);out: cpu_maps_update_done();} static int __init alloc_frozen_cpus(void){ if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO)) return -ENOMEM; return 0;}core_initcall(alloc_frozen_cpus); /* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen * or not, as reported by the notification, remains unchanged *throughout the * duration* of the execution of the callbacks. * Hence we need to prevent the freezer from racing with regular CPU hotplug. * * This synchronization is implemented by mutually excluding regular CPU * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/ * Hibernate notifications. */static intcpu_hotplug_pm_callback(struct notifier_block *nb, unsigned long action, void *ptr){ switch (action) { case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: cpu_hotplug_enable(); break; default: return NOTIFY_DONE; } return NOTIFY_OK;} static int __init cpu_hotplug_pm_sync_init(void){ /* * cpu_hotplug_pm_callback has higher priority than x86 * bsp_pm_callback which depends on cpu_hotplug_pm_callback * to disable cpu hotplug to avoid cpu hotplug race. */ pm_notifier(cpu_hotplug_pm_callback, 0); return 0;}core_initcall(cpu_hotplug_pm_sync_init); #endif /* CONFIG_PM_SLEEP_SMP */ Lines 1001–1500 of 2554. Previous lines Load more
if (!cpu_present(cpu)) return -EINVAL; cpus_write_lock(); cpuhp_tasks_frozen = tasks_frozen; prev_state = cpuhp_set_state(st, target); /* * If the current CPU state is in the range of the AP hotplug thread, * then we need to kick the thread. */ if (st->state > CPUHP_TEARDOWN_CPU) { st->target = max((int)target, CPUHP_TEARDOWN_CPU); ret = cpuhp_kick_ap_work(cpu); /* * The AP side has done the error rollback already. Just * return the error code.. */ if (ret) goto out; /* * We might have stopped still in the range of the AP hotplug * thread. Nothing to do anymore. */ if (st->state > CPUHP_TEARDOWN_CPU) goto out; st->target = target; } /* * The AP brought itself down to CPUHP_TEARDOWN_CPU. So we need * to do the further cleanups. */ ret = cpuhp_down_callbacks(cpu, st, target); if (ret && st->state == CPUHP_TEARDOWN_CPU && st->state < prev_state) { cpuhp_reset_state(st, prev_state); __cpuhp_kick_ap(st); } out: cpus_write_unlock(); /* * Do post unplug cleanup. This is still protected against * concurrent CPU hotplug via cpu_add_remove_lock. */ lockup_detector_cleanup(); arch_smt_update(); return ret; } static int cpu_down_maps_locked(unsigned int cpu, enum cpuhp_state target) { if (cpu_hotplug_disabled) return -EBUSY; return _cpu_down(cpu, 0, target); } static int cpu_down(unsigned int cpu, enum cpuhp_state target) { int err; cpu_maps_update_begin(); err = cpu_down_maps_locked(cpu, target); cpu_maps_update_done(); return err; } /** * cpu_device_down - Bring down a cpu device * @dev: Pointer to the cpu device to offline * * This function is meant to be used by device core cpu subsystem only. * * Other subsystems should use remove_cpu() instead. */ int cpu_device_down(struct device *dev) { return cpu_down(dev->id, CPUHP_OFFLINE); } int remove_cpu(unsigned int cpu) { int ret; lock_device_hotplug(); ret = device_offline(get_cpu_device(cpu)); unlock_device_hotplug(); return ret; } EXPORT_SYMBOL_GPL(remove_cpu); void smp_shutdown_nonboot_cpus(unsigned int primary_cpu) { unsigned int cpu; int error; cpu_maps_update_begin(); /* * Make certain the cpu I'm about to reboot on is online. * * This is inline to what migrate_to_reboot_cpu() already do. */ if (!cpu_online(primary_cpu)) primary_cpu = cpumask_first(cpu_online_mask); for_each_online_cpu(cpu) { if (cpu == primary_cpu) continue; error = cpu_down_maps_locked(cpu, CPUHP_OFFLINE); if (error) { pr_err("Failed to offline CPU%d - error=%d", cpu, error); break; } } /* * Ensure all but the reboot CPU are offline. */ BUG_ON(num_online_cpus() > 1); /* * Make sure the CPUs won't be enabled by someone else after this * point. Kexec will reboot to a new kernel shortly resetting * everything along the way. */ cpu_hotplug_disabled++; cpu_maps_update_done(); } #else #define takedown_cpu NULL #endif /*CONFIG_HOTPLUG_CPU*/ /** * notify_cpu_starting(cpu) - Invoke the callbacks on the starting CPU * @cpu: cpu that just started * * It must be called by the arch code on the new cpu, before the new cpu * enables interrupts and before the "boot" cpu returns from __cpu_up(). */ void notify_cpu_starting(unsigned int cpu) { struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); enum cpuhp_state target = min((int)st->target, CPUHP_AP_ONLINE); int ret; rcu_cpu_starting(cpu); /* Enables RCU usage on this CPU. */ cpumask_set_cpu(cpu, &cpus_booted_once_mask); while (st->state < target) { st->state++; ret = cpuhp_invoke_callback(cpu, st->state, true, NULL, NULL); /* * STARTING must not fail! */ WARN_ON_ONCE(ret); } } /* * Called from the idle task. Wake up the controlling task which brings the * hotplug thread of the upcoming CPU up and then delegates the rest of the * online bringup to the hotplug thread. */ void cpuhp_online_idle(enum cpuhp_state state) { struct cpuhp_cpu_state *st = this_cpu_ptr(&cpuhp_state); /* Happens for the boot cpu */ if (state != CPUHP_AP_ONLINE_IDLE) return; /* * Unpart the stopper thread before we start the idle loop (and start * scheduling); this ensures the stopper task is always available. */ stop_machine_unpark(smp_processor_id()); st->state = CPUHP_AP_ONLINE_IDLE; complete_ap_thread(st, true); } /* Requires cpu_add_remove_lock to be held */ static int _cpu_up(unsigned int cpu, int tasks_frozen, enum cpuhp_state target) { struct cpuhp_cpu_state *st = per_cpu_ptr(&cpuhp_state, cpu); struct task_struct *idle; int ret = 0; cpus_write_lock(); if (!cpu_present(cpu)) { ret = -EINVAL; goto out; } /* * The caller of cpu_up() might have raced with another * caller. Nothing to do. */ if (st->state >= target) goto out; if (st->state == CPUHP_OFFLINE) { /* Let it fail before we try to bring the cpu up */ idle = idle_thread_get(cpu); if (IS_ERR(idle)) { ret = PTR_ERR(idle); goto out; } } cpuhp_tasks_frozen = tasks_frozen; cpuhp_set_state(st, target); /* * If the current CPU state is in the range of the AP hotplug thread, * then we need to kick the thread once more. */ if (st->state > CPUHP_BRINGUP_CPU) { ret = cpuhp_kick_ap_work(cpu); /* * The AP side has done the error rollback already. Just * return the error code.. */ if (ret) goto out; } /* * Try to reach the target state. We max out on the BP at * CPUHP_BRINGUP_CPU. After that the AP hotplug thread is * responsible for bringing it up to the target state. */ target = min((int)target, CPUHP_BRINGUP_CPU); ret = cpuhp_up_callbacks(cpu, st, target); out: cpus_write_unlock(); arch_smt_update(); return ret; } static int cpu_up(unsigned int cpu, enum cpuhp_state target) { int err = 0; if (!cpu_possible(cpu)) { pr_err("can't online cpu %d because it is not configured as may-hotadd at boot time\n", cpu); #if defined(CONFIG_IA64) pr_err("please check additional_cpus= boot parameter\n"); #endif return -EINVAL; } err = try_online_node(cpu_to_node(cpu)); if (err) return err; cpu_maps_update_begin(); if (cpu_hotplug_disabled) { err = -EBUSY; goto out; } if (!cpu_smt_allowed(cpu)) { err = -EPERM; goto out; } err = _cpu_up(cpu, 0, target); out: cpu_maps_update_done(); return err; } /** * cpu_device_up - Bring up a cpu device * @dev: Pointer to the cpu device to online * * This function is meant to be used by device core cpu subsystem only. * * Other subsystems should use add_cpu() instead. */ int cpu_device_up(struct device *dev) { return cpu_up(dev->id, CPUHP_ONLINE); } int add_cpu(unsigned int cpu) { int ret; lock_device_hotplug(); ret = device_online(get_cpu_device(cpu)); unlock_device_hotplug(); return ret; } EXPORT_SYMBOL_GPL(add_cpu); /** * bringup_hibernate_cpu - Bring up the CPU that we hibernated on * @sleep_cpu: The cpu we hibernated on and should be brought up. * * On some architectures like arm64, we can hibernate on any CPU, but on * wake up the CPU we hibernated on might be offline as a side effect of * using maxcpus= for example. */ int bringup_hibernate_cpu(unsigned int sleep_cpu) { int ret; if (!cpu_online(sleep_cpu)) { pr_info("Hibernated on a CPU that is offline! Bringing CPU up.\n"); ret = cpu_up(sleep_cpu, CPUHP_ONLINE); if (ret) { pr_err("Failed to bring hibernate-CPU up!\n"); return ret; } } return 0; } void bringup_nonboot_cpus(unsigned int setup_max_cpus) { unsigned int cpu; for_each_present_cpu(cpu) { if (num_online_cpus() >= setup_max_cpus) break; if (!cpu_online(cpu)) cpu_up(cpu, CPUHP_ONLINE); } } #ifdef CONFIG_PM_SLEEP_SMP static cpumask_var_t frozen_cpus; int freeze_secondary_cpus(int primary) { int cpu, error = 0; cpu_maps_update_begin(); if (primary == -1) { primary = cpumask_first(cpu_online_mask); if (!housekeeping_cpu(primary, HK_FLAG_TIMER)) primary = housekeeping_any_cpu(HK_FLAG_TIMER); } else { if (!cpu_online(primary)) primary = cpumask_first(cpu_online_mask); } /* * We take down all of the non-boot CPUs in one shot to avoid races * with the userspace trying to use the CPU hotplug at the same time */ cpumask_clear(frozen_cpus); pr_info("Disabling non-boot CPUs ...\n"); for_each_online_cpu(cpu) { if (cpu == primary) continue; if (pm_wakeup_pending()) { pr_info("Wakeup pending. Abort CPU freeze\n"); error = -EBUSY; break; } trace_suspend_resume(TPS("CPU_OFF"), cpu, true); error = _cpu_down(cpu, 1, CPUHP_OFFLINE); trace_suspend_resume(TPS("CPU_OFF"), cpu, false); if (!error) cpumask_set_cpu(cpu, frozen_cpus); else { pr_err("Error taking CPU%d down: %d\n", cpu, error); break; } } if (!error) BUG_ON(num_online_cpus() > 1); else pr_err("Non-boot CPUs are not disabled\n"); /* * Make sure the CPUs won't be enabled by someone else. We need to do * this even in case of failure as all freeze_secondary_cpus() users are * supposed to do thaw_secondary_cpus() on the failure path. */ cpu_hotplug_disabled++; cpu_maps_update_done(); return error; } void __weak arch_thaw_secondary_cpus_begin(void) { } void __weak arch_thaw_secondary_cpus_end(void) { } void thaw_secondary_cpus(void) { int cpu, error; /* Allow everyone to use the CPU hotplug again */ cpu_maps_update_begin(); __cpu_hotplug_enable(); if (cpumask_empty(frozen_cpus)) goto out; pr_info("Enabling non-boot CPUs ...\n"); arch_thaw_secondary_cpus_begin(); for_each_cpu(cpu, frozen_cpus) { trace_suspend_resume(TPS("CPU_ON"), cpu, true); error = _cpu_up(cpu, 1, CPUHP_ONLINE); trace_suspend_resume(TPS("CPU_ON"), cpu, false); if (!error) { pr_info("CPU%d is up\n", cpu); continue; } pr_warn("Error taking CPU%d up: %d\n", cpu, error); } arch_thaw_secondary_cpus_end(); cpumask_clear(frozen_cpus); out: cpu_maps_update_done(); } static int __init alloc_frozen_cpus(void) { if (!alloc_cpumask_var(&frozen_cpus, GFP_KERNEL|__GFP_ZERO)) return -ENOMEM; return 0; } core_initcall(alloc_frozen_cpus); /* * When callbacks for CPU hotplug notifications are being executed, we must * ensure that the state of the system with respect to the tasks being frozen * or not, as reported by the notification, remains unchanged *throughout the * duration* of the execution of the callbacks. * Hence we need to prevent the freezer from racing with regular CPU hotplug. * * This synchronization is implemented by mutually excluding regular CPU * hotplug and Suspend/Hibernate call paths by hooking onto the Suspend/ * Hibernate notifications. */ static int cpu_hotplug_pm_callback(struct notifier_block *nb, unsigned long action, void *ptr) { switch (action) { case PM_SUSPEND_PREPARE: case PM_HIBERNATION_PREPARE: cpu_hotplug_disable(); break; case PM_POST_SUSPEND: case PM_POST_HIBERNATION: cpu_hotplug_enable(); break; default: return NOTIFY_DONE; } return NOTIFY_OK; } static int __init cpu_hotplug_pm_sync_init(void) { /* * cpu_hotplug_pm_callback has higher priority than x86 * bsp_pm_callback which depends on cpu_hotplug_pm_callback * to disable cpu hotplug to avoid cpu hotplug race. */ pm_notifier(cpu_hotplug_pm_callback, 0); return 0; } core_initcall(cpu_hotplug_pm_sync_init); #endif /* CONFIG_PM_SLEEP_SMP */