#include <linux/config.h>#include <asm/asm-offsets.h>#include <asm-generic/vmlinux.lds.h> #undef mips#define mips mipsOUTPUT_ARCH(mips)ENTRY(kernel_entry)jiffies = JIFFIES;SECTIONS{#ifdef CONFIG_BOOT_ELF64 /* Read-only sections, merged into text segment: */ /* . = 0xc000000000000000; */ /* This is the value for an Origin kernel, taken from an IRIX kernel. */ /* . = 0xc00000000001c000; */ /* Set the vaddr for the text segment to a value >= 0xa800 0000 0001 9000 if no symmon is going to configured >= 0xa800 0000 0030 0000 otherwise */ /* . = 0xa800000000300000; */ /* . = 0xa800000000300000; */ . = 0xffffffff80300000;#endif . = LOADADDR; /* read-only */ _text = .; /* Text and read-only data */ .text : { *(.text) SCHED_TEXT LOCK_TEXT *(.fixup) *(.gnu.warning) } =0 _etext = .; /* End of text section */ . = ALIGN(16); /* Exception table */ __start___ex_table = .; __ex_table : { *(__ex_table) } __stop___ex_table = .; __start___dbe_table = .; /* Exception table for data bus errors */ __dbe_table : { *(__dbe_table) } __stop___dbe_table = .; RODATA /* writeable */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ *(.data.init_task) *(.data) CONSTRUCTORS } _gp = . + 0x8000; .lit8 : { *(.lit8) } .lit4 : { *(.lit4) } /* We want the small data sections together, so single-instruction offsets can access them all, and initialized data all before uninitialized, so we can shorten the on-disk segment size. */ .sdata : { *(.sdata) } . = ALIGN(_PAGE_SIZE); __nosave_begin = .; .data_nosave : { *(.data.nosave) } . = ALIGN(_PAGE_SIZE); __nosave_end = .; . = ALIGN(32); .data.cacheline_aligned : { *(.data.cacheline_aligned) } _edata = .; /* End of data section */ /* will be freed after init */ . = ALIGN(_PAGE_SIZE); /* Init code and data */ __init_begin = .; .init.text : { _sinittext = .; *(.init.text) _einittext = .; } .init.data : { *(.init.data) } . = ALIGN(16); __setup_start = .; .init.setup : { *(.init.setup) } __setup_end = .; __initcall_start = .; .initcall.init : { *(.initcall1.init) *(.initcall2.init) *(.initcall3.init) *(.initcall4.init) *(.initcall5.init) *(.initcall6.init) *(.initcall7.init) } __initcall_end = .; __con_initcall_start = .; .con_initcall.init : { *(.con_initcall.init) } __con_initcall_end = .; SECURITY_INIT /* .exit.text is discarded at runtime, not link time, to deal with references from .rodata */ .exit.text : { *(.exit.text) } . = ALIGN(_PAGE_SIZE); __initramfs_start = .; .init.ramfs : { *(.init.ramfs) } __initramfs_end = .; . = ALIGN(32); __per_cpu_start = .; .data.percpu : { *(.data.percpu) } __per_cpu_end = .; . = ALIGN(_PAGE_SIZE); __init_end = .; /* freed after init ends here */ __bss_start = .; /* BSS */ .sbss : { *(.sbss) *(.scommon) } .bss : { *(.bss) *(COMMON) } __bss_stop = .; _end = . ; /* Sections to be discarded */ /DISCARD/ : { *(.exit.data) *(.exitcall.exit) /* ABI crap starts here */ *(.comment) *(.MIPS.options) *(.note) *(.options) *(.pdr) *(.reginfo) *(.mdebug*) } /* This is the MIPS specific mdebug section. */ .mdebug : { *(.mdebug) } STABS_DEBUG DWARF_DEBUG /* These must appear regardless of . */ .gptab.sdata : { *(.gptab.data) *(.gptab.sdata) } .gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) } .note : { *(.note) }}
#include <linux/config.h>
#include <asm/asm-offsets.h>
#include <asm-generic/vmlinux.lds.h>
#undef mips
#define mips mips
OUTPUT_ARCH(mips)
ENTRY(kernel_entry)
jiffies = JIFFIES;
SECTIONS
{
#ifdef CONFIG_BOOT_ELF64
/* Read-only sections, merged into text segment: */
/* . = 0xc000000000000000; */
/* This is the value for an Origin kernel, taken from an IRIX kernel. */
/* . = 0xc00000000001c000; */
/* Set the vaddr for the text segment to a value
>= 0xa800 0000 0001 9000 if no symmon is going to configured
>= 0xa800 0000 0030 0000 otherwise */
/* . = 0xa800000000300000; */
/* . = 0xa800000000300000; */
. = 0xffffffff80300000;
#endif
. = LOADADDR;
/* read-only */
_text = .; /* Text and read-only data */
.text : {
*(.text)
SCHED_TEXT
LOCK_TEXT
*(.fixup)
*(.gnu.warning)
} =0
_etext = .; /* End of text section */
. = ALIGN(16); /* Exception table */
__start___ex_table = .;
__ex_table : { *(__ex_table) }
__stop___ex_table = .;
__start___dbe_table = .; /* Exception table for data bus errors */
__dbe_table : { *(__dbe_table) }
__stop___dbe_table = .;
RODATA
/* writeable */
.data : { /* Data */
. = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */
*(.data.init_task)
*(.data)
CONSTRUCTORS
}
_gp = . + 0x8000;
.lit8 : { *(.lit8) }
.lit4 : { *(.lit4) }
/* We want the small data sections together, so single-instruction offsets
can access them all, and initialized data all before uninitialized, so
we can shorten the on-disk segment size. */
.sdata : { *(.sdata) }
. = ALIGN(_PAGE_SIZE);
__nosave_begin = .;
.data_nosave : { *(.data.nosave) }
. = ALIGN(_PAGE_SIZE);
__nosave_end = .;
. = ALIGN(32);
.data.cacheline_aligned : { *(.data.cacheline_aligned) }
_edata = .; /* End of data section */
/* will be freed after init */
. = ALIGN(_PAGE_SIZE); /* Init code and data */
__init_begin = .;
.init.text : {
_sinittext = .;
*(.init.text)
_einittext = .;
}
.init.data : { *(.init.data) }
. = ALIGN(16);
__setup_start = .;
.init.setup : { *(.init.setup) }
__setup_end = .;
__initcall_start = .;
.initcall.init : {
*(.initcall1.init)
*(.initcall2.init)
*(.initcall3.init)
*(.initcall4.init)
*(.initcall5.init)
*(.initcall6.init)
*(.initcall7.init)
}
__initcall_end = .;
__con_initcall_start = .;
.con_initcall.init : { *(.con_initcall.init) }
__con_initcall_end = .;
SECURITY_INIT
/* .exit.text is discarded at runtime, not link time, to deal with
references from .rodata */
.exit.text : { *(.exit.text) }
. = ALIGN(_PAGE_SIZE);
__initramfs_start = .;
.init.ramfs : { *(.init.ramfs) }
__initramfs_end = .;
. = ALIGN(32);
__per_cpu_start = .;
.data.percpu : { *(.data.percpu) }
__per_cpu_end = .;
. = ALIGN(_PAGE_SIZE);
__init_end = .;
/* freed after init ends here */
__bss_start = .; /* BSS */
.sbss : {
*(.sbss)
*(.scommon)
}
.bss : {
*(.bss)
*(COMMON)
}
__bss_stop = .;
_end = . ;
/* Sections to be discarded */
/DISCARD/ : {
*(.exit.data)
*(.exitcall.exit)
/* ABI crap starts here */
*(.comment)
*(.MIPS.options)
*(.note)
*(.options)
*(.pdr)
*(.reginfo)
*(.mdebug*)
}
/* This is the MIPS specific mdebug section. */
.mdebug : { *(.mdebug) }
STABS_DEBUG
DWARF_DEBUG
/* These must appear regardless of . */
.gptab.sdata : { *(.gptab.data) *(.gptab.sdata) }
.gptab.sbss : { *(.gptab.bss) *(.gptab.sbss) }
.note : { *(.note) }
}