// SPDX-License-Identifier: GPL-2.0+ #include <linux/array_size.h>#include <linux/bitmap.h>#include <linux/bits.h>#include <linux/clk.h>#include <linux/delay.h>#include <linux/device.h>#include <linux/devm-helpers.h>#include <linux/err.h>#include <linux/gpio/consumer.h>#include <linux/i2c.h>#include <linux/input.h>#include <linux/kernel.h>#include <linux/module.h>#include <linux/property.h>#include <linux/pwm.h>#include <linux/regmap.h>#include <linux/regulator/consumer.h>#include <linux/units.h> /* * System control (LDO regulator) * * LDO voltage to register mapping is linear, but it is split in two parts: * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7 */ #define ISA1200_SCTRL 0x00#define ISA1200_LDO_VOLTAGE_BASE 0x08#define ISA1200_LDO_VOLTAGE_STEP 100000#define ISA1200_LDO_VOLTAGE_2V3 23#define ISA1200_LDO_VOLTAGE_3V1 31#define ISA1200_LDO_VOLTAGE_MIN 2300000#define ISA1200_LDO_VOLTAGE_MAX 3800000 /* * The output frequency is calculated with this formula: * * base clock frequency * fout = ----------------------------------------- * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD * * The base clock frequency is the clock frequency provided on the * clock input to the chip, divided by the value in HCTRL0 * * PWM_FREQ is configured in register HCTRL4, it is common to set this * to 0 to get only two variables to calculate. * * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15) * PWM_PERIOD is configured in register HCTRL6 * Further the duty cycle can be configured in HCTRL5 */ /* * HCTRL0 configures clock or PWM input and selects the divider for * the clock input. */#define ISA1200_HCTRL0 0x30#define ISA1200_HCTRL0_HAP_ENABLE BIT(7)#define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4)#define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3)#define ISA1200_HCTRL0_CLKDIV_128 128 /* * HCTRL1 configures the motor type and clock sourse */#define ISA1200_HCTRL1 0x31#define ISA1200_HCTRL1_EXT_CLOCK BIT(7)#define ISA1200_HCTRL1_DAC_INVERT BIT(6)#define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5) /* HCTRL2 controls software reset of the chip */#define ISA1200_HCTRL2 0x32#define ISA1200_HCTRL2_SW_RESET BIT(0) /* * HCTRL3 controls the PLL divisor * * Bits [0,1] are always set to 1 (we don't know what they are * used for) and bit 4 and upward control the PLL divisor. */#define ISA1200_HCTRL3 0x33#define ISA1200_HCTRL3_DEFAULT 0x03#define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4) /* HCTRL4 controls the PWM frequency of external channel */#define ISA1200_HCTRL4 0x34 /* HCTRL5 controls the PWM high duty cycle of internal channel */#define ISA1200_HCTRL5 0x35 /* HCTRL6 controls the PWM period of internal channel */#define ISA1200_HCTRL6 0x36#define ISA1200_HCTRL6_PERIOD_SCALE 100 /* The use for these registers is unknown but they exist */#define ISA1200_HCTRL7 0x37#define ISA1200_HCTRL8 0x38#define ISA1200_HCTRL9 0x39#define ISA1200_HCTRLA 0x3a#define ISA1200_HCTRLB 0x3b#define ISA1200_HCTRLC 0x3c#define ISA1200_HCTRLD 0x3d #define ISA1200_EN_PINS_MAX 2 static const struct regulator_bulk_data isa1200_supplies[] = { { .supply = "vdd" }, { .supply = "vddp" },}; struct isa1200_config { u32 ldo_voltage; u32 mode; u32 clkdiv; u32 plldiv; u32 freq; u32 period; u32 duty;}; struct isa1200 { struct input_dev *input; struct regmap *map; struct clk *clk; struct pwm_device *pwm; struct gpio_descs *enable_gpios; struct regulator_bulk_data *supplies; struct work_struct play_work; struct isa1200_config config; int level; bool suspended; bool active;}; static const struct regmap_config isa1200_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = ISA1200_HCTRLD,}; static void isa1200_start(struct isa1200 *isa){ struct isa1200_config *config = &isa->config; struct device *dev = &isa->input->dev; struct pwm_state state; u8 hctrl0 = 0, hctrl1 = 0; DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX); int err; if (!isa->active) { err = regulator_bulk_enable(ARRAY_SIZE(isa1200_supplies), isa->supplies); if (err) { dev_err(dev, "failed to enable supplies (%d)\n", err); return; } err = clk_prepare_enable(isa->clk); if (err) { dev_err(dev, "failed to enable clock (%d)\n", err); regulator_bulk_disable(ARRAY_SIZE(isa1200_supplies), isa->supplies); return; } bitmap_fill(values, ISA1200_EN_PINS_MAX); gpiod_multi_set_value_cansleep(isa->enable_gpios, values); usleep_range(200, 300); } regmap_write(isa->map, ISA1200_SCTRL, config->ldo_voltage); if (isa->clk) { hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE; hctrl1 = ISA1200_HCTRL1_EXT_CLOCK; } if (isa->pwm) { hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE; hctrl1 = 0; } hctrl0 |= __ffs(config->clkdiv / ISA1200_HCTRL0_CLKDIV_128); hctrl1 |= ISA1200_HCTRL1_DAC_INVERT; hctrl1 |= ISA1200_HCTRL1_MODE(config->mode); regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); regmap_write(isa->map, ISA1200_HCTRL1, hctrl1); /* Make sure to de-assert software reset */ regmap_write(isa->map, ISA1200_HCTRL2, 0x00); /* PLL divisor */ regmap_write(isa->map, ISA1200_HCTRL3, ISA1200_HCTRL3_PLLDIV(config->plldiv) | ISA1200_HCTRL3_DEFAULT); /* Frequency */ regmap_write(isa->map, ISA1200_HCTRL4, config->freq); /* Duty cycle */ regmap_write(isa->map, ISA1200_HCTRL5, config->period >> 1); /* Period */ regmap_write(isa->map, ISA1200_HCTRL6, config->period); hctrl0 |= ISA1200_HCTRL0_HAP_ENABLE; regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); if (isa->clk) regmap_write(isa->map, ISA1200_HCTRL5, config->duty); if (isa->pwm) { pwm_get_state(isa->pwm, &state); state.duty_cycle = config->duty; state.enabled = true; pwm_apply_might_sleep(isa->pwm, &state); } isa->active = true;} static void isa1200_stop(struct isa1200 *isa){ struct pwm_state state; DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX); if (!isa->active) return; if (isa->pwm) { pwm_get_state(isa->pwm, &state); state.duty_cycle = 0; state.enabled = false; pwm_apply_might_sleep(isa->pwm, &state); } regmap_write(isa->map, ISA1200_HCTRL0, 0x00); bitmap_zero(values, ISA1200_EN_PINS_MAX); gpiod_multi_set_value_cansleep(isa->enable_gpios, values); clk_disable_unprepare(isa->clk); regulator_bulk_disable(ARRAY_SIZE(isa1200_supplies), isa->supplies); isa->active = false;} static void isa1200_play_work(struct work_struct *work){ struct isa1200 *isa = container_of(work, struct isa1200, play_work); if (!READ_ONCE(isa->suspended)) { if (isa->level) isa1200_start(isa); else isa1200_stop(isa); }} static int isa1200_vibrator_play_effect(struct input_dev *input, void *data, struct ff_effect *effect){ struct isa1200 *isa = input_get_drvdata(input); int level; /* * TODO: we currently only support rumble. * The ISA1200 can control two motors and some devices * also have two motors mounted. */ level = effect->u.rumble.strong_magnitude; if (!level) level = effect->u.rumble.weak_magnitude; dev_dbg(&input->dev, "FF effect type %d level %d\n", effect->type, level); if (isa->level != level) { isa->level = level; if (!READ_ONCE(isa->suspended)) schedule_work(&isa->play_work); } return 0;} static void isa1200_vibrator_close(struct input_dev *input){ struct isa1200 *isa = input_get_drvdata(input); cancel_work_sync(&isa->play_work); isa1200_stop(isa); isa->level = 0;} static int isa1200_of_probe(struct i2c_client *client){ struct isa1200 *isa = i2c_get_clientdata(client); struct isa1200_config *config = &isa->config; struct device *dev = &client->dev; struct fwnode_handle *ldo_node; int err; isa->clk = devm_clk_get_optional(dev, NULL); if (IS_ERR(isa->clk)) return dev_err_probe(dev, PTR_ERR(isa->clk), "failed to get clock\n"); isa->pwm = devm_pwm_get(dev, NULL); if (IS_ERR(isa->pwm)) { err = PTR_ERR(isa->pwm); if (err == -ENODEV || err == -EINVAL) isa->pwm = NULL; else return dev_err_probe(dev, err, "getting PWM\n"); } if (!isa->clk && !isa->pwm) return dev_err_probe(dev, -EINVAL, "clock or PWM are required, none were provided\n"); err = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(isa1200_supplies), isa1200_supplies, &isa->supplies); if (err) return dev_err_probe(dev, err, "failed to get supplies\n"); isa->enable_gpios = devm_gpiod_get_array_optional(dev, "control", GPIOD_OUT_LOW); if (IS_ERR(isa->enable_gpios)) return dev_err_probe(dev, PTR_ERR(isa->enable_gpios), "failed to get enable gpios\n"); if (isa->enable_gpios && isa->enable_gpios->ndescs > ISA1200_EN_PINS_MAX) return dev_err_probe(dev, -EINVAL, "too many enable gpios\n"); ldo_node = device_get_named_child_node(dev, "ldo"); if (!ldo_node) return dev_err_probe(dev, -ENODEV, "failed to get embedded LDO node\n"); err = fwnode_property_read_u32(ldo_node, "regulator-min-microvolt", &config->ldo_voltage); fwnode_handle_put(ldo_node); if (err) return dev_err_probe(dev, err, "failed to get ldo voltage\n"); config->ldo_voltage = clamp(config->ldo_voltage, ISA1200_LDO_VOLTAGE_MIN, ISA1200_LDO_VOLTAGE_MAX); config->ldo_voltage /= ISA1200_LDO_VOLTAGE_STEP; if (config->ldo_voltage < ISA1200_LDO_VOLTAGE_3V1) config->ldo_voltage = config->ldo_voltage - ISA1200_LDO_VOLTAGE_2V3 + ISA1200_LDO_VOLTAGE_BASE; else config->ldo_voltage -= ISA1200_LDO_VOLTAGE_3V1; config->mode = 0; /* LRA_MODE */ device_property_read_u32(dev, "imagis,mode", &config->mode); config->clkdiv = ISA1200_HCTRL0_CLKDIV_128; device_property_read_u32(dev, "imagis,clk-div", &config->clkdiv); if (!config->clkdiv) return dev_err_probe(dev, -EINVAL, "clk-div cannot be zero\n"); config->clkdiv = clamp(config->clkdiv, ISA1200_HCTRL0_CLKDIV_128, ISA1200_HCTRL0_CLKDIV_128 << 3); err = device_property_read_u32(dev, "imagis,pll-div", &config->plldiv); if (err || !config->plldiv) config->plldiv = 1; config->period = 0; config->freq = 0; config->duty = 0; if (isa->clk) { err = device_property_read_u32(dev, "imagis,period-ns", &config->period); if (err) return dev_err_probe(dev, err, "failed to get period\n"); /* * TODO: The scale value is arbitrary, but it fits observations * quite well, and the exact conversion method is unknown. * The period property value returned above is the HCTRL6 * register value set by the vendor code, multiplied by 100. */ config->period /= ISA1200_HCTRL6_PERIOD_SCALE; config->duty = config->period >> 1; } if (isa->pwm) { struct pwm_state state; pwm_init_state(isa->pwm, &state); if (!state.period) return dev_err_probe(dev, -EINVAL, "PWM period cannot be zero\n"); config->freq = div64_u64(NANO, state.period * config->clkdiv); config->duty = state.period >> 1; err = pwm_apply_might_sleep(isa->pwm, &state); if (err) return dev_err_probe(dev, err, "failed to apply initial PWM state\n"); } /* * TODO: If device is using a clock, this property should return the * value written to the HCTRL5 register by downstrem code. It likely * needs to be converted into a meaningful duty cycle value, though * unfortunately the exact conversion mechanism is unknown. If the * device uses PWM, this property will return the correct duty cycle * in nanoseconds. */ device_property_read_u32(dev, "imagis,duty-cycle-ns", &config->duty); return 0;} static int isa1200_probe(struct i2c_client *client){ struct isa1200 *isa; struct device *dev = &client->dev; int err; isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL); if (!isa) return -ENOMEM; isa->input = devm_input_allocate_device(dev); if (!isa->input) return -ENOMEM; i2c_set_clientdata(client, isa); err = isa1200_of_probe(client); if (err) return err; isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config); if (IS_ERR(isa->map)) return dev_err_probe(dev, PTR_ERR(isa->map), "failed to initialize register map\n"); INIT_WORK(&isa->play_work, isa1200_play_work); isa->input->name = "isa1200-haptic"; isa->input->id.bustype = BUS_I2C; isa->input->close = isa1200_vibrator_close; isa->active = false; input_set_drvdata(isa->input, isa); /* TODO: this hardware can likely support more than rumble */ input_set_capability(isa->input, EV_FF, FF_RUMBLE); err = input_ff_create_memless(isa->input, NULL, isa1200_vibrator_play_effect); if (err) return dev_err_probe(dev, err, "failed to create FF dev\n"); err = input_register_device(isa->input); if (err) return dev_err_probe(dev, err, "failed to register input dev\n"); return 0;} static int isa1200_suspend(struct device *dev){ struct isa1200 *isa = dev_get_drvdata(dev); guard(mutex)(&isa->input->mutex); if (input_device_enabled(isa->input)) { WRITE_ONCE(isa->suspended, true); cancel_work_sync(&isa->play_work); isa1200_stop(isa); } return 0;} static int isa1200_resume(struct device *dev){ struct isa1200 *isa = dev_get_drvdata(dev); Lines 1–500 of 533. Load more
// SPDX-License-Identifier: GPL-2.0+ #include <linux/array_size.h> #include <linux/bitmap.h> #include <linux/bits.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/device.h> #include <linux/devm-helpers.h> #include <linux/err.h> #include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/property.h> #include <linux/pwm.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> #include <linux/units.h> /* * System control (LDO regulator) * * LDO voltage to register mapping is linear, but it is split in two parts: * 2.3V - 3.0V map to 0x08 - 0x0f; 3.1V - 3.8V map to 0x00 - 0x7 */ #define ISA1200_SCTRL 0x00 #define ISA1200_LDO_VOLTAGE_BASE 0x08 #define ISA1200_LDO_VOLTAGE_STEP 100000 #define ISA1200_LDO_VOLTAGE_2V3 23 #define ISA1200_LDO_VOLTAGE_3V1 31 #define ISA1200_LDO_VOLTAGE_MIN 2300000 #define ISA1200_LDO_VOLTAGE_MAX 3800000 /* * The output frequency is calculated with this formula: * * base clock frequency * fout = ----------------------------------------- * (128 - PWM_FREQ) * 2 * PLLDIV * PWM_PERIOD * * The base clock frequency is the clock frequency provided on the * clock input to the chip, divided by the value in HCTRL0 * * PWM_FREQ is configured in register HCTRL4, it is common to set this * to 0 to get only two variables to calculate. * * PLLDIV is configured in register HCTRL3 (bits 7..4, so 0..15) * PWM_PERIOD is configured in register HCTRL6 * Further the duty cycle can be configured in HCTRL5 */ /* * HCTRL0 configures clock or PWM input and selects the divider for * the clock input. */ #define ISA1200_HCTRL0 0x30 #define ISA1200_HCTRL0_HAP_ENABLE BIT(7) #define ISA1200_HCTRL0_PWM_GEN_MODE BIT(4) #define ISA1200_HCTRL0_PWM_INPUT_MODE BIT(3) #define ISA1200_HCTRL0_CLKDIV_128 128 /* * HCTRL1 configures the motor type and clock sourse */ #define ISA1200_HCTRL1 0x31 #define ISA1200_HCTRL1_EXT_CLOCK BIT(7) #define ISA1200_HCTRL1_DAC_INVERT BIT(6) #define ISA1200_HCTRL1_MODE(n) (((n) & 1) << 5) /* HCTRL2 controls software reset of the chip */ #define ISA1200_HCTRL2 0x32 #define ISA1200_HCTRL2_SW_RESET BIT(0) /* * HCTRL3 controls the PLL divisor * * Bits [0,1] are always set to 1 (we don't know what they are * used for) and bit 4 and upward control the PLL divisor. */ #define ISA1200_HCTRL3 0x33 #define ISA1200_HCTRL3_DEFAULT 0x03 #define ISA1200_HCTRL3_PLLDIV(n) (((n) & 0xf) << 4) /* HCTRL4 controls the PWM frequency of external channel */ #define ISA1200_HCTRL4 0x34 /* HCTRL5 controls the PWM high duty cycle of internal channel */ #define ISA1200_HCTRL5 0x35 /* HCTRL6 controls the PWM period of internal channel */ #define ISA1200_HCTRL6 0x36 #define ISA1200_HCTRL6_PERIOD_SCALE 100 /* The use for these registers is unknown but they exist */ #define ISA1200_HCTRL7 0x37 #define ISA1200_HCTRL8 0x38 #define ISA1200_HCTRL9 0x39 #define ISA1200_HCTRLA 0x3a #define ISA1200_HCTRLB 0x3b #define ISA1200_HCTRLC 0x3c #define ISA1200_HCTRLD 0x3d #define ISA1200_EN_PINS_MAX 2 static const struct regulator_bulk_data isa1200_supplies[] = { { .supply = "vdd" }, { .supply = "vddp" }, }; struct isa1200_config { u32 ldo_voltage; u32 mode; u32 clkdiv; u32 plldiv; u32 freq; u32 period; u32 duty; }; struct isa1200 { struct input_dev *input; struct regmap *map; struct clk *clk; struct pwm_device *pwm; struct gpio_descs *enable_gpios; struct regulator_bulk_data *supplies; struct work_struct play_work; struct isa1200_config config; int level; bool suspended; bool active; }; static const struct regmap_config isa1200_regmap_config = { .reg_bits = 8, .val_bits = 8, .max_register = ISA1200_HCTRLD, }; static void isa1200_start(struct isa1200 *isa) { struct isa1200_config *config = &isa->config; struct device *dev = &isa->input->dev; struct pwm_state state; u8 hctrl0 = 0, hctrl1 = 0; DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX); int err; if (!isa->active) { err = regulator_bulk_enable(ARRAY_SIZE(isa1200_supplies), isa->supplies); if (err) { dev_err(dev, "failed to enable supplies (%d)\n", err); return; } err = clk_prepare_enable(isa->clk); if (err) { dev_err(dev, "failed to enable clock (%d)\n", err); regulator_bulk_disable(ARRAY_SIZE(isa1200_supplies), isa->supplies); return; } bitmap_fill(values, ISA1200_EN_PINS_MAX); gpiod_multi_set_value_cansleep(isa->enable_gpios, values); usleep_range(200, 300); } regmap_write(isa->map, ISA1200_SCTRL, config->ldo_voltage); if (isa->clk) { hctrl0 = ISA1200_HCTRL0_PWM_GEN_MODE; hctrl1 = ISA1200_HCTRL1_EXT_CLOCK; } if (isa->pwm) { hctrl0 = ISA1200_HCTRL0_PWM_INPUT_MODE; hctrl1 = 0; } hctrl0 |= __ffs(config->clkdiv / ISA1200_HCTRL0_CLKDIV_128); hctrl1 |= ISA1200_HCTRL1_DAC_INVERT; hctrl1 |= ISA1200_HCTRL1_MODE(config->mode); regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); regmap_write(isa->map, ISA1200_HCTRL1, hctrl1); /* Make sure to de-assert software reset */ regmap_write(isa->map, ISA1200_HCTRL2, 0x00); /* PLL divisor */ regmap_write(isa->map, ISA1200_HCTRL3, ISA1200_HCTRL3_PLLDIV(config->plldiv) | ISA1200_HCTRL3_DEFAULT); /* Frequency */ regmap_write(isa->map, ISA1200_HCTRL4, config->freq); /* Duty cycle */ regmap_write(isa->map, ISA1200_HCTRL5, config->period >> 1); /* Period */ regmap_write(isa->map, ISA1200_HCTRL6, config->period); hctrl0 |= ISA1200_HCTRL0_HAP_ENABLE; regmap_write(isa->map, ISA1200_HCTRL0, hctrl0); if (isa->clk) regmap_write(isa->map, ISA1200_HCTRL5, config->duty); if (isa->pwm) { pwm_get_state(isa->pwm, &state); state.duty_cycle = config->duty; state.enabled = true; pwm_apply_might_sleep(isa->pwm, &state); } isa->active = true; } static void isa1200_stop(struct isa1200 *isa) { struct pwm_state state; DECLARE_BITMAP(values, ISA1200_EN_PINS_MAX); if (!isa->active) return; if (isa->pwm) { pwm_get_state(isa->pwm, &state); state.duty_cycle = 0; state.enabled = false; pwm_apply_might_sleep(isa->pwm, &state); } regmap_write(isa->map, ISA1200_HCTRL0, 0x00); bitmap_zero(values, ISA1200_EN_PINS_MAX); gpiod_multi_set_value_cansleep(isa->enable_gpios, values); clk_disable_unprepare(isa->clk); regulator_bulk_disable(ARRAY_SIZE(isa1200_supplies), isa->supplies); isa->active = false; } static void isa1200_play_work(struct work_struct *work) { struct isa1200 *isa = container_of(work, struct isa1200, play_work); if (!READ_ONCE(isa->suspended)) { if (isa->level) isa1200_start(isa); else isa1200_stop(isa); } } static int isa1200_vibrator_play_effect(struct input_dev *input, void *data, struct ff_effect *effect) { struct isa1200 *isa = input_get_drvdata(input); int level; /* * TODO: we currently only support rumble. * The ISA1200 can control two motors and some devices * also have two motors mounted. */ level = effect->u.rumble.strong_magnitude; if (!level) level = effect->u.rumble.weak_magnitude; dev_dbg(&input->dev, "FF effect type %d level %d\n", effect->type, level); if (isa->level != level) { isa->level = level; if (!READ_ONCE(isa->suspended)) schedule_work(&isa->play_work); } return 0; } static void isa1200_vibrator_close(struct input_dev *input) { struct isa1200 *isa = input_get_drvdata(input); cancel_work_sync(&isa->play_work); isa1200_stop(isa); isa->level = 0; } static int isa1200_of_probe(struct i2c_client *client) { struct isa1200 *isa = i2c_get_clientdata(client); struct isa1200_config *config = &isa->config; struct device *dev = &client->dev; struct fwnode_handle *ldo_node; int err; isa->clk = devm_clk_get_optional(dev, NULL); if (IS_ERR(isa->clk)) return dev_err_probe(dev, PTR_ERR(isa->clk), "failed to get clock\n"); isa->pwm = devm_pwm_get(dev, NULL); if (IS_ERR(isa->pwm)) { err = PTR_ERR(isa->pwm); if (err == -ENODEV || err == -EINVAL) isa->pwm = NULL; else return dev_err_probe(dev, err, "getting PWM\n"); } if (!isa->clk && !isa->pwm) return dev_err_probe(dev, -EINVAL, "clock or PWM are required, none were provided\n"); err = devm_regulator_bulk_get_const(dev, ARRAY_SIZE(isa1200_supplies), isa1200_supplies, &isa->supplies); if (err) return dev_err_probe(dev, err, "failed to get supplies\n"); isa->enable_gpios = devm_gpiod_get_array_optional(dev, "control", GPIOD_OUT_LOW); if (IS_ERR(isa->enable_gpios)) return dev_err_probe(dev, PTR_ERR(isa->enable_gpios), "failed to get enable gpios\n"); if (isa->enable_gpios && isa->enable_gpios->ndescs > ISA1200_EN_PINS_MAX) return dev_err_probe(dev, -EINVAL, "too many enable gpios\n"); ldo_node = device_get_named_child_node(dev, "ldo"); if (!ldo_node) return dev_err_probe(dev, -ENODEV, "failed to get embedded LDO node\n"); err = fwnode_property_read_u32(ldo_node, "regulator-min-microvolt", &config->ldo_voltage); fwnode_handle_put(ldo_node); if (err) return dev_err_probe(dev, err, "failed to get ldo voltage\n"); config->ldo_voltage = clamp(config->ldo_voltage, ISA1200_LDO_VOLTAGE_MIN, ISA1200_LDO_VOLTAGE_MAX); config->ldo_voltage /= ISA1200_LDO_VOLTAGE_STEP; if (config->ldo_voltage < ISA1200_LDO_VOLTAGE_3V1) config->ldo_voltage = config->ldo_voltage - ISA1200_LDO_VOLTAGE_2V3 + ISA1200_LDO_VOLTAGE_BASE; else config->ldo_voltage -= ISA1200_LDO_VOLTAGE_3V1; config->mode = 0; /* LRA_MODE */ device_property_read_u32(dev, "imagis,mode", &config->mode); config->clkdiv = ISA1200_HCTRL0_CLKDIV_128; device_property_read_u32(dev, "imagis,clk-div", &config->clkdiv); if (!config->clkdiv) return dev_err_probe(dev, -EINVAL, "clk-div cannot be zero\n"); config->clkdiv = clamp(config->clkdiv, ISA1200_HCTRL0_CLKDIV_128, ISA1200_HCTRL0_CLKDIV_128 << 3); err = device_property_read_u32(dev, "imagis,pll-div", &config->plldiv); if (err || !config->plldiv) config->plldiv = 1; config->period = 0; config->freq = 0; config->duty = 0; if (isa->clk) { err = device_property_read_u32(dev, "imagis,period-ns", &config->period); if (err) return dev_err_probe(dev, err, "failed to get period\n"); /* * TODO: The scale value is arbitrary, but it fits observations * quite well, and the exact conversion method is unknown. * The period property value returned above is the HCTRL6 * register value set by the vendor code, multiplied by 100. */ config->period /= ISA1200_HCTRL6_PERIOD_SCALE; config->duty = config->period >> 1; } if (isa->pwm) { struct pwm_state state; pwm_init_state(isa->pwm, &state); if (!state.period) return dev_err_probe(dev, -EINVAL, "PWM period cannot be zero\n"); config->freq = div64_u64(NANO, state.period * config->clkdiv); config->duty = state.period >> 1; err = pwm_apply_might_sleep(isa->pwm, &state); if (err) return dev_err_probe(dev, err, "failed to apply initial PWM state\n"); } /* * TODO: If device is using a clock, this property should return the * value written to the HCTRL5 register by downstrem code. It likely * needs to be converted into a meaningful duty cycle value, though * unfortunately the exact conversion mechanism is unknown. If the * device uses PWM, this property will return the correct duty cycle * in nanoseconds. */ device_property_read_u32(dev, "imagis,duty-cycle-ns", &config->duty); return 0; } static int isa1200_probe(struct i2c_client *client) { struct isa1200 *isa; struct device *dev = &client->dev; int err; isa = devm_kzalloc(dev, sizeof(*isa), GFP_KERNEL); if (!isa) return -ENOMEM; isa->input = devm_input_allocate_device(dev); if (!isa->input) return -ENOMEM; i2c_set_clientdata(client, isa); err = isa1200_of_probe(client); if (err) return err; isa->map = devm_regmap_init_i2c(client, &isa1200_regmap_config); if (IS_ERR(isa->map)) return dev_err_probe(dev, PTR_ERR(isa->map), "failed to initialize register map\n"); INIT_WORK(&isa->play_work, isa1200_play_work); isa->input->name = "isa1200-haptic"; isa->input->id.bustype = BUS_I2C; isa->input->close = isa1200_vibrator_close; isa->active = false; input_set_drvdata(isa->input, isa); /* TODO: this hardware can likely support more than rumble */ input_set_capability(isa->input, EV_FF, FF_RUMBLE); err = input_ff_create_memless(isa->input, NULL, isa1200_vibrator_play_effect); if (err) return dev_err_probe(dev, err, "failed to create FF dev\n"); err = input_register_device(isa->input); if (err) return dev_err_probe(dev, err, "failed to register input dev\n"); return 0; } static int isa1200_suspend(struct device *dev) { struct isa1200 *isa = dev_get_drvdata(dev); guard(mutex)(&isa->input->mutex); if (input_device_enabled(isa->input)) { WRITE_ONCE(isa->suspended, true); cancel_work_sync(&isa->play_work); isa1200_stop(isa); } return 0; } static int isa1200_resume(struct device *dev) { struct isa1200 *isa = dev_get_drvdata(dev);